The Bosch LSU4.2 and LSU4.9 wide-band O2 sensors (shipped standard with Innovate Motorsport products) are rated to operate at an exhaust gas temperature of < 1,700 Fahrenheit (930 Celsius), and a sensor housing temperature of < 1,058 Fahrenheit (570 Celsius) measured at the hex, for maximum accuracy and control. When either of these operating temperature ranges is exceeded, the sensor can no longer be accurately controlled. Further, operating at or above these temperatures for any length of time can significantly reduce the life expectancy of the sensor. Innovate Motorsports products are designed to display an error message under these conditions (08- Sensor Timing Error) rather than provide inaccurate readings. For some turbo vehicles, rotary engines, and other specialty setups, this error message can be encountered with annoying frequency due to operating conditions specific to those engine types and configurations. This precision machined part is engineered to address applications generating excessive heat in the O2 sensor by utilizing a specialty heat sink design which pulls the sensor futher out of the exhaust stream while maintaining correct flow of exhaust gasses to the sensor for accurate readings.

This patent-pending, Venturi-effect, tapped exhaust clamp from Innovate Motorsports is ideal for obtaining accurate lambda measurements on temporary installations for non-catalyst autos or other engines.

Innovate Replacement Temperature Sensor (P/N 3853)

Innovate 4 BAR MAP Sensor for MTX-D / SCG-1

Innovate Replacement DB Gauge Hardware Kit

The Innovate Motorsports Mtx-Ol Plus Wideband Gauge Features A Crisp, Easy To Read Oled Display With Patented Directdigital Technology And All-New Advanced Sensor Control Which Receives Feedback From The Sensor More Frequently And Optimizes Heater Control. The Combination Of These Technologies Makes The Mtx-Ol Plus Innovates Fastest, Most Durable And Accurate Air/Fuel Ratio Gauge Ever! Includes Innovate Mts Serial Comms For Use With Mts Enabled Devices To Add Additional Logging Channels For Analysis With Powerful Logworks Pc Software.

Innovate Pressure Sensor 0-150PSI (10 Bar) Air/Fluid w/Harness (Replacement for 3913,3903,3910)

Innovate K-Type EGT Probe w/ Type-K Connector & Hardware (6ft, Generic)

Plug & Play 0-1450 PSI (100 BAR) Air/Fluid Pressure Sensor for SSI-4 PLUS.Installation Instructions

The Innovate Motorsports Mtx-L Plus Wideband Gauge Features Patented Directdigital Technology And All-New Advanced Sensor Control Which Receives Feedback From The Sensor More Frequently And Optimizes Heater Control. The Combination Of These Technologies Makes The Mtx-L Plus Innovates Fastest, Most Durable And Accurate Air/Fuel Ratio Gauge Ever! Includes Innovate Mts Serial Comms For Use With Mts Enabled Devices To Add Additional Logging Channels For Analysis With Powerful Logworks Pc Software.Installation Instructions

Innovate Motorsports MTX Digital Series Dual Function Gauges are 2 1/16 (52mm) gauges featuring interchangeable faceplates and bezels for a user-customized look, locking connectors for simplified installation, and MTS serial connections used to connect with other Innovate devices for logging.Installation Instructions

The Tc-4 Plus Is 4 Channel Type-K Thermocouple Amplifier Device That Can Be Used A Stand-Alone System Or As Part Of A Mts (Modular Tuning System). The Tc-4 Plus Includes A Digital Input/Output, 4 Full-Programmable Analog Outputs, And Is Ideal For Applications Such As Dynamometers, Data Acquisition Systems, Or Standalone Ecus. The Tc-4 Is Also A Key Component Of Innovate Motorsports Modular Tuning System (Mts). Using The Tc-4 Pluss Serial Ports You Can Daisy-Chain Other Innovate Devices Such As The Mtx-L, Lm-2, Lc-2, And Ssi-4 Plus.Installation Instructions

The Ssi-4 Plus Will Allow The Capture Of Data From 4 External Sensors. These Sensors Can Be Frequencies Such As Engine Rpm And Speed Sensors Or 0-5V References Like Map Sensors And Pressure Transducers. The Ssi-4 Plus May Be Used As A Stand-Alone System Or Integrated With Other Innovate Motorsports Mts Products To Create A Log Chain. The Ssi-4 Is Also A Key Component Of Innovate Motorsports Modular Tuning System (Mts). Using The Ssi-4 Pluss Serial Ports You Can Daisy-Chain Other Innovate Devices Such As The Mtx-L, Lm-2, Lc-2, And Tc-4 Plus.Installation Instructions

The Ethanol Advanced Gauges Combine Innovate Motorsports Patented Directdigital O2 Sensor Control Technology With Application Specific Sensors, An Oled Display, And A Sophisticated Ethanol Content Sensor That Also Measures Fuel Temperature. These Capabilities Allow The User To Monitor And Capture Critical Metrics For Accurate And Reliable Tuning While Operating With High Ethanol Content Fuel. The Ethanol Advanced Gauges Offer The Looks, Safety And Performance Enthusiasts Demand! Includes Innovate Mts Serial Comms For Use With Mts Enabled Devices To Add Additional Logging Channels For Analysis With Powerful Logworks Pc Software.Installation Instructions

The Ethanol Advanced Gauges Combine Innovate Motorsports Patented Directdigital O2 Sensor Control Technology With Application Specific Sensors, An Oled Display, And A Sophisticated Ethanol Content Sensor That Also Measures Fuel Temperature. These Capabilities Allow The User To Monitor And Capture Critical Metrics For Accurate And Reliable Tuning While Operating With High Ethanol Content Fuel. The Ethanol Advanced Gauges Offer The Looks, Safety And Performance Enthusiasts Demand! Includes Innovate Mts Serial Comms For Use With Mts Enabled Devices To Add Additional Logging Channels For Analysis With Powerful Logworks Pc Software.Installation Instructions

Innovate MTX-A Series gauges are 2 1/16" of pure performance! This microprocessor-driven series delivers superior needle holding force for high shock and high vibration applications. They feature high performance, high-torque, 270 degree stepper motors, programmable warning indicators, and Innovate MTS serial in/out to use with their other devices as well as third-party MTS-enabled devices to add additional logging channels. Innovate MTX-A Series analog gauges are available to provide various data readings, and also each dial also includes stylish, interchangeable black and silver bezels.Installation Instructions

Innovate Motorsports MTX Digital Series Dual Function Gauges are 2 1/16 (52mm) gauges featuring interchangeable faceplates and bezels for a user-customized look, locking connectors for simplified installation, and MTS serial connections used to connect with other Innovate devices for logging.Installation Instructions

The Ethanol Advanced Gauges Combine Innovate Motorsports Patented Directdigital O2 Sensor Control Technology With Application Specific Sensors, An Oled Display, And A Sophisticated Ethanol Content Sensor That Also Measures Fuel Temperature. These Capabilities Allow The User To Monitor And Capture Critical Metrics For Accurate And Reliable Tuning While Operating With High Ethanol Content Fuel. The Ethanol Advanced Gauges Offer The Looks, Safety And Performance Enthusiasts Demand! Includes Innovate Mts Serial Comms For Use With Mts Enabled Devices To Add Additional Logging Channels For Analysis With Powerful Logworks Pc Software.Installation Instructions

It is also possible to verify which sensor is currently being used by connecting your Innovate product to the LM Programmer software.Installation Instructions

It is also possible to verify which sensor is currently being used by connecting your Innovate product to the LM Programmer software.Installation Instructions

It is also possible to verify which sensor is currently being used by connecting your Innovate product to the LM Programmer software.Installation Instructions

The TC-4 PLUS is 4 channel type-K thermocouple amplifier device that can be used a stand-alone system or as part of a MTS (Modular Tuning System). The TC-4 PLUS includes a digital input/output, 4 full-programmable analog outputs, and is ideal for applications such as dynamometers, data acquisition systems, or standalone ECUs. This bundle kit also includes qty. 4 Type K thermocouples and associated mounting hardware.Installation Instructions

The Powersafe Gauges Combine Innovate Motorsports Patented Directdigital O2 Sensor Control Technology With Application Specific Sensors, An Oled Display, And A Smart Safety Override Circuit For Your High Performance Vehicle. Innovate Powersafe Technology Can Disable Your Factory Or Aftermarket Boost Control Solenoid Forcing The System To Spring Pressure. In Nitrous Applications, Powersafe Technology Will Disable Your Nitrous Solenoid To Keep Your Engine Safe. The Powersafe Gauges Offer The Looks, Safety And Performance Enthusiasts Demand! Includes Innovate Mts Serial Comms For Use With Mts Enabled Devices To Add Additional Logging Channels For Analysis With Powerful Logworks Pc Software.Installation Instructions

The Powersafe Gauges Combine Innovate Motorsports Patented Directdigital O2 Sensor Control Technology With Application Specific Sensors, An Oled Display, And A Smart Safety Override Circuit For Your High Performance Vehicle. Innovate Powersafe Technology Can Disable Your Factory Or Aftermarket Boost Control Solenoid Forcing The System To Spring Pressure. In Nitrous Applications, Powersafe Technology Will Disable Your Nitrous Solenoid To Keep Your Engine Safe. The Powersafe Gauges Offer The Looks, Safety And Performance Enthusiasts Demand! Includes Innovate Mts Serial Comms For Use With Mts Enabled Devices To Add Additional Logging Channels For Analysis With Powerful Logworks Pc Software.Installation Instructions

It is also possible to verify which sensor is currently being used by connecting your Innovate product to the LM Programmer software.

The Evolution Of The Worlds Most Popular Stand Alone Digital O2 Sensor Controller, The Innovate Motorsports Lc-2 Builds Upon The Legacy Of The Lc-1 By Adding Simplicity And Leading Edge Technology. The Lc-2 Utilizes 100% Digital Wideband Air/Fuel Ratio Technology On The Market! The Lc-2S Patented Award-Winning Directdigital Signal Processing Technology Provides Data On Exactly How Rich Or Lean An Engine Is Running At Any Load. The Lc-2S Self-Calibrating Circuitry Also Compensates For Changes In Temperature, Altitude, And Sensor Condition. The Lc-2 Includes A Digital Input/Output, 2 Full-Programmable Analog Outputs, And Is Ideal For Applications Such As Dynamometers, Data Acquisition Systems, Standalone Ecus, And Gauges. The Lc-2 Can Also Be Daisy-Chained For Cost-Effective Individual Cylinder Monitoring, And Is Fully Compatible With Our Modular Tuning System (Mts).Installation Instructions

The Innovate Motorsports Scg-1 Is A Revolutionary Approach To Boost Control That Integrates An Advanced Standalone Boost Controller With Innovates Industry Leading Directdigital Wideband Air Fuel Ratio Technology. When Innovate Motorsports Decided To Build A Boost Controller, They Knew They Had To Offer More Capabilities Than Other Products Available Today, While Still Maintaining The User Friendly Functionality Demanded By Their Customers. Instead Of Repackaging The Same Boost Control Technology That Has Been Used For Decades, Innovate Choose To Pair Their Advanced O2 Sensor Control Technology With An All-New, Proprietary Solenoid Control That Provides Superior Boost Control Accuracy, Response And Safety. Innovate Also Added A User Programmable Shift Light And Housed The Entire Package In A Compact Gauge Body For Ease Of Installation And Use. As With All Innovate Motorsports Air/Fuel Ratio Products, The Scg-1 Utilizes Our 100% Digital Wideband Air/Fuel Ratio Technology To Provide Real Time Feedback To The Scg-1. This Air/Fuel Information Is Displayed On An Integrated Oled Display Along With Manifold Pressure And Wastegate Duty Status. The Air/Fuel Ratio Information Is Also Used To Provide A User Definable Boost Cut That Enhances The Safety Margin Over Most Competitors Offerings That Only Rely On Over Boost Threshold. The Scg-1 Has A Full-Programmable Analog Output Ideal For Applications Using Standalone Ecus, Piggy-Back Ecus Or External Data Loggers. The Scg-1 Also Has A Digital Input/Output For Integration With Our Other Modular Tuning System (Mts) Devices. This Same Digital Output Can Be Used To Record Air/Fuel Ratio, Solenoid Duty Cycle, Engine Speed And Manifold Pressure With Our Free Logworks Pc Software To Help You Dial In A Perfect Boost Curve.Installation Instructions

Innovate USB SD Memory Card Reader

The PL-1 is the latest in Innovate Motorsports line-up of products to allow for easy data logging of your MTS (Modular Tuning System) compatible product. Whether you have an LC-2 & SSI-4 PLUS, MTX gauges, or any other combination of Innovate Motorsports MTS devices, the PL-1 integrates seamlessly to record all the data from the connected devices.Installation Instructions

The Innovate Motorsports DB gauges are 52mm (2 1/16) air fuel gauges. Each gauge features a bright LED display (available in blue, green, or red). Each Gauge Kit includes the gauge, an LC-2 wideband controller, oxygen sensor, bung, serial cable, and the award-winning LogWorks engine-tuning software. For tuners seeking the most cost-effective way to start monitoring Air/Fuel Ratio, the DB series gauges offer an attractive option, while opening the world of true digital data acquisition and software engine analysis. For example, users can add multi-sensor interfaces, and log 5 critical parameters directly into any PC or laptop. Or they can get a PL-1 data logger for hundreds of hours of 32-channel data logging on an SD card. Best of all, the DB gauges include the powerful LogWorks software for synchronous high-speed logging of wideband data, other MTS sensors, and data from a growing list of piggyback fuel controllers and standalone or factory (OBD2) ECUs. This is the same software used by champion engine builders and racers.Installation Instructions

The Innovate Motorsports DB gauges are 52mm (2 1/16) air fuel gauges. Each gauge features a bright LED display (available in blue, green, or red). For tuners seeking the most cost-effective way to start monitoring Air/Fuel Ratio, the DB series gauges offer an attractive display option for the LC-1, LC-2, LM-1, or LM-2 lambda controller kits.Installation Instructions

Innovate Vacuum / Boost Hose Kit (use w/ MTX-D / MTX-A / ECB-1 / PSB-1 Gauges)

Innovate MTX-A Series gauges are 2 1/16" of pure performance! This microprocessor-driven series delivers superior needle holding force for high shock and high vibration applications. They feature high performance, high-torque, 270 degree stepper motors, programmable warning indicators, and Innovate MTS serial in/out to use with their other devices as well as third-party MTS-enabled devices to add additional logging channels. Innovate MTX-A Series analog gauges are available to provide various data readings, and also each dial also includes stylish, interchangeable black and silver bezels.Installation Instructions

Innovate MTX-A Series gauges are 2 1/16" of pure performance! This microprocessor-driven series delivers superior needle holding force for high shock and high vibration applications. They feature high performance, high-torque, 270 degree stepper motors, programmable warning indicators, and Innovate MTS serial in/out to use with their other devices as well as third-party MTS-enabled devices to add additional logging channels. Innovate MTX-A Series analog gauges are available to provide various data readings, and also each dial also includes stylish, interchangeable black and silver bezels.Installation Instructions

Innovate MTX-A Series gauges are 2 1/16" of pure performance! This microprocessor-driven series delivers superior needle holding force for high shock and high vibration applications. They feature high performance, high-torque, 270 degree stepper motors, programmable warning indicators, and Innovate MTS serial in/out to use with their other devices as well as third-party MTS-enabled devices to add additional logging channels. Innovate MTX-A Series analog gauges are available to provide various data readings, and also each dial also includes stylish, interchangeable black and silver bezels.Installation Instructions

Innovate MTX-A Series gauges are 2 1/16" of pure performance! This microprocessor-driven series delivers superior needle holding force for high shock and high vibration applications. They feature high performance, high-torque, 270 degree stepper motors, programmable warning indicators, and Innovate MTS serial in/out to use with their other devices as well as third-party MTS-enabled devices to add additional logging channels. Innovate MTX-A Series analog gauges are available to provide various data readings, and also each dial also includes stylish, interchangeable black and silver bezels.Installation Instructions