The 2.5in Lift system for 2014 2500 Rams features more than just basic spacers. Dodge designed the front coil springs with a large bow to increase vehicle stability and handling. Unlike other flat spacers on the market, Fabtech's angled spacers retain this important feature preserving the factory ride characteristics. The front shocks are replaced with longer length Fabtech'stealth shocks to allow for full suspension travel while improving the damping of the front suspension. Extended length bump stops are included in this kit to prevent the coil springs from binding at full compression while also eliminating Trac Bar interference. Optional rear shocks are available separately. This kit can be removed to return the vehicle to stock. Estimated installation time - 1.5 hrs. No drilling or welding required.This Part Fits: Year Make Model Submodel 2014-2018 Ram 2500 Big Horn 2014-2018 Ram 2500 Laramie 2014-2015 Ram 2500 Laramie Limited 2014-2018 Ram 2500 Laramie Longhorn 2016-2018 Ram 2500 Limited 2014-2015 Ram 2500 Lone Star 2014-2016 Ram 2500 Outdoorsman 2014-2018 Ram 2500 Power Wagon 2014-2018 Ram 2500 SLT 2014-2018 Ram 2500 Tradesman

The 2.5in Lift system for 2014 3500 Rams, with factory Radius Arm front suspension, features more than just basic spacers. Dodge designed the front coil springs with a large bow to increase vehicle stability and handling. Unlike other flat spacers on the market, Fabtech's angled spacers retain this important feature preserving the factory ride characteristics. The front shocks are replaced with longer length Fabtech'stealth shocks to allow for full suspension travel while improving the damping of the front suspension. Extended length bump stops are included in this kit to prevent the coil springs from binding at full compression while also eliminating Trac Bar interference. Optional rear shocks are available separately. This kit can be removed to return the vehicle to stock. Estimated installation time - 1.5 hrs. No drilling or welding required.This Part Fits: Year Make Model Submodel 2014 Ram 2500 Big Horn 2014 Ram 2500 Laramie 2014 Ram 2500 Laramie Limited 2014 Ram 2500 Laramie Longhorn 2014 Ram 2500 Lone Star 2014 Ram 2500 Outdoorsman 2014 Ram 2500 SLT 2014 Ram 2500 Tradesman 2013-2018 Ram 3500 Big Horn 2013-2018 Ram 3500 Laramie 2014-2015 Ram 3500 Laramie Limited 2013-2018 Ram 3500 Laramie Longhorn 2016-2018 Ram 3500 Limited 2013-2015,2017 Ram 3500 Lone Star 2013-2018 Ram 3500 SLT 2013 Ram 3500 ST 2013-2018 Ram 3500 Tradesman

This Super Duty lift kit is perfect for the enthusiast looking to run oversized tires and wants additional wheel travel for offroad use. With the large Super Duty wheelwell openings and this quality 2.5in lift kit, you can run 35in tall tires with ease. Fabtech's coil springs retain the factory load carrying capacity while providing increased suspension travel. The coil springs and associated bracketry allow for an additional inch of compression travel over stock without binding the suspension. This extra travel helps when offroading in rugged terrain. Sway bar drop brackets are included to reposition the front bar so that the link ends do not go over center at full droop and cause bind. The brake lines are relocated down on the frame with extension brackets to eliminate the possibility of overstretching the lines throughout the new travel range. Fabtech provides extension brackets rather than longer brake lines to keep the factory brake system sealed for fast and trouble-free installation. This suspension kit utilizes the factory bump stops without extensions. This allows for more travel with the Fabtech coil springs and components. To help keep the factory alignment specifications of the vehicle, Fabtech includes 2 degree adjustable alignment ball joint inserts. They help retain the factory caster specifications for optimum driveability. After a Super Duty is lifted the front axle is pushed to one side due to the length of the track bar. To address this issue Fabtech provides a heavy-duty adjustable track bar. The Fabtech track bar allows for on the vehicle adjustment to center the axle under the vehicle. This provides proper tracking of the front and rear axle for excellent highway manners. This Super Duty lift kit retains the factory shocks with heavy duty shock extension brackets for a stock like ride. With the installation of this 2.5in lift the vehicle's stance front to rear will be nearly flat compared to the factory nose-down appearance. For owners that wanThis Part Fits: Year Make Model Submodel 2017-2023 Ford F-250 Super Duty King Ranch 2017-2023 Ford F-250 Super Duty Lariat 2018-2023 Ford F-250 Super Duty Limited 2017-2023 Ford F-250 Super Duty Platinum 2017-2023 Ford F-250 Super Duty XL 2017-2023 Ford F-250 Super Duty XLT 2017-2023 Ford F-350 Super Duty King Ranch 2017-2023 Ford F-350 Super Duty Lariat 2018-2023 Ford F-350 Super Duty Limited 2017-2023 Ford F-350 Super Duty Platinum 2017-2023 Ford F-350 Super Duty XL 2017-2023 Ford F-350 Super Duty XLT

This Super Duty lift kit is perfect for the enthusiast looking to run oversized tires and wants additional wheel travel for offroad use. With the large Super Duty wheelwell openings and this quality 2.5in lift kit, you can run 35in tall tires with ease. Fabtech's coil springs retain the factory load carrying capacity while providing increased suspension travel. The coil springs and associated bracketry allow for an additional inch of compression travel over stock without binding the suspension. This extra travel helps when offroading in rugged terrain. Sway bar drop brackets are included to reposition the front bar so that the link ends do not go over center at full droop and cause bind. The brake lines are relocated down on the frame with extension brackets to eliminate the possibility of overstretching the lines throughout the new travel range. Fabtech provides extension brackets rather than longer brake lines to keep the factory brake system sealed for fast and trouble-free installation. This suspension kit utilizes the factory bump stops without extensions. This allows for more travel with the Fabtech coil springs and components. Typically, once a Super Duty is lifted the front axle is pushed to one side due to the length of the track bar and the location. To address this issue Fabtech provides a heavy-duty 1/4in thick steel Track Bar mount. It repositions the track bar and front axle under the vehicle to the factory specifications. This provides proper tracking of the front and rear axle for excellent highway manners. This Super Duty lift kit retains the factory shocks with heavy duty shock extension brackets for a stock like ride. With the installation of this 2.5in lift the vehicle's stance front to rear will be nearly flat compared to the factory nose-down appearance. For owners that want to retain more of the factory nose-down appearance, Fabtech offers an optional 4in rear block kit (FTS22214). The 4in blocks replace the factory 2.5in blocks and will proviThis Part Fits: Year Make Model Submodel 2017-2023 Ford F-250 Super Duty King Ranch 2017-2023 Ford F-250 Super Duty Lariat 2018-2023 Ford F-250 Super Duty Limited 2017-2023 Ford F-250 Super Duty Platinum 2017-2023 Ford F-250 Super Duty XL 2017-2023 Ford F-250 Super Duty XLT 2017-2023 Ford F-350 Super Duty King Ranch 2017-2023 Ford F-350 Super Duty Lariat 2018-2023 Ford F-350 Super Duty Limited 2017-2023 Ford F-350 Super Duty Platinum 2017-2023 Ford F-350 Super Duty XL 2017-2023 Ford F-350 Super Duty XLT

This Super Duty lift kit is perfect for the enthusiast looking to run oversized tires and wants additional wheel travel for offroad use. With the large Super Duty wheelwell openings and this quality 2.5in lift kit, you can run 35in tall tires with ease. Fabtech's coil springs retain the factory load carrying capacity while providing increased suspension travel. The coil springs and associated bracketry allow for an additional inch of compression travel over stock without binding the suspension. This extra travel helps when offroading in rugged terrain. Sway bar drop brackets are included to reposition the front bar so that the link ends do not go over center at full droop and cause bind. The brake lines are relocated down on the frame with extension brackets to eliminate the possibility of overstretching the lines throughout the new travel range. Fabtech provides extension brackets rather than longer brake lines to keep the factory brake system sealed for fast and trouble-free installation. This suspension kit utilizes the factory bump stops without extensions. This allows for more travel with the Fabtech coil springs and components. Typically, once a Super Duty is lifted the front axle is pushed to one side due to the length of the track bar and the location. To address this issue Fabtech provides a heavy-duty 1/4in thick steel Track Bar mount. It repositions the track bar and front axle under the vehicle to the factory specifications. This provides proper tracking of the front and rear axle for excellent highway manners. This Super Duty lift kit includes Fabtech Stealth shocks. They are a sealed monotube shock that has a Nitrocarb piston rod for corrosion resistance and resist rock chipping. They will provide a great highway ride with good offroad damping capacity. With the installation of this 2.5in lift the vehicle's stance front to rear will be nearly flat compared to the factory nose-down appearance. For owners that want to retain more of the factory nose-downThis Part Fits: Year Make Model Submodel 2017-2023 Ford F-250 Super Duty King Ranch 2017-2023 Ford F-250 Super Duty Lariat 2018-2023 Ford F-250 Super Duty Limited 2017-2023 Ford F-250 Super Duty Platinum 2017-2023 Ford F-250 Super Duty XL 2017-2023 Ford F-250 Super Duty XLT 2017-2023 Ford F-350 Super Duty King Ranch 2017-2023 Ford F-350 Super Duty Lariat 2018-2023 Ford F-350 Super Duty Limited 2017-2023 Ford F-350 Super Duty Platinum 2017-2023 Ford F-350 Super Duty XL 2017-2023 Ford F-350 Super Duty XLT

This Super Duty lift kit is perfect for the enthusiast looking to run oversized tires and wants additional wheel travel for offroad use. With the large Super Duty wheelwell openings and this quality 2.5in lift kit, you can run 35in tall tires with ease. Fabtech's coil springs retain the factory load carrying capacity while providing increased suspension travel. The coil springs and associated bracketry allow for an additional inch of compression travel over stock without binding the suspension. This extra travel helps when offroading in rugged terrain. Sway bar drop brackets are included to reposition the front bar so that the link ends do not go over center at full droop and cause bind. The brake lines are relocated down on the frame with extension brackets to eliminate the possibility of overstretching the lines throughout the new travel range. Fabtech provides extension brackets rather than longer brake lines to keep the factory brake system sealed for fast and trouble-free installation. This suspension kit utilizes the factory bump stops without extensions. This allows for more travel with the Fabtech coil springs and components. Typically, once a Super Duty is lifted the front axle is pushed to one side due to the length of the track bar and the location. To address this issue Fabtech provides a heavy-duty 1/4in thick steel Track Bar mount. It repositions the track bar and front axle under the vehicle to the factory specifications. This provides proper tracking of the front and rear axle for excellent highway manners. This Super Duty lift kit includes Fabtech Performance shocks. They are a twin tube shock that will provide a good highway ride with the ability to tackle offroad. With the installation of this 2.5in lift the vehicle's stance front to rear will be nearly flat compared to the factory nose-down appearance. For owners that want to retain more of the factory nose-down appearance, Fabtech offers an optional 4in rear block kit (FTS22214). The 4in blocksThis Part Fits: Year Make Model Submodel 2017-2023 Ford F-250 Super Duty King Ranch 2017-2023 Ford F-250 Super Duty Lariat 2018-2023 Ford F-250 Super Duty Limited 2017-2023 Ford F-250 Super Duty Platinum 2017-2023 Ford F-250 Super Duty XL 2017-2023 Ford F-250 Super Duty XLT 2017-2023 Ford F-350 Super Duty King Ranch 2017-2023 Ford F-350 Super Duty Lariat 2018-2023 Ford F-350 Super Duty Limited 2017-2023 Ford F-350 Super Duty Platinum 2017-2023 Ford F-350 Super Duty XL 2017-2023 Ford F-350 Super Duty XLT

Fabtech's Upper Control Arm system provides a 3.5" lift over stock with increased wheel travel and no suspension bind at full droop. Lift is accomplished with steel spacers that utilize the factory Coilover shocks for a stock ride. The replacement Upper Control Arms address the geometry of the front suspension with the new ride height for proper alignability. Heavy duty ball joints allow for extended suspension travel to eliminate binding. The system has been designed for proper CV axle angle and plunge thus eliminating the need to reposition the front differential. Rear lift comes from 1.5" blocks and u-bolts.This 3.5" Upper Control Arm system allows clearance of 31" tires without the removal or cutting of the factory Intrusion Beams located in the front fenderwell. The Intrusion Beams are an integral part of the front collision safety impact feature of the Ranger and limits tire clearance to a 31" tire with a 3.5" lift. For Ranger owners that want to run a 33" tire, Fabtech offers optional replacement Offset Intrusion Beams. They directly replace the factory units helping to retain the safety feature of the Beams while allowing clearance of 33" tires. These 1/4" thick steel Beams are offset to allow full steer with 33/12.50R tires w/ a 5" back space wheel.This Part Fits: Year Make Model Submodel 2019 Ford Ranger Lariat 2019 Ford Ranger XL 2019 Ford Ranger XLT

Fabtechs development capabilities are second to none with over 20 years of experience in aftermarket suspension design. State of the art software, fabrication equipment along with our seasoned engineers and fabricators allow the company to develop products that are constantly on the cutting edge. Fabtech has received numerous awards for our designs that continue to lead the market. Proper design in suspension development is key in providing a quality, trouble free product to the end consumer. Fabtech leads the industry with extensive research, design technology and rigorous testing that results in the highest performing, finest quality suspension system for the discerning offroad enthusiast.This Part Fits: Year Make Model Submodel 2003-2005 Ford Excursion Eddie Bauer 2000-2005 Ford Excursion Limited 2004-2005 Ford Excursion XLS 2000-2005 Ford Excursion XLT 1999 Ford F-250 Base 1999 Ford F-250 Lariat 1999 Ford F-250 XL 1999 Ford F-250 XLT 2004 Ford F-250 Super Duty Harley-Davidson Edition 2004 Ford F-250 Super Duty King Ranch 1999-2004 Ford F-250 Super Duty Lariat 1999-2004 Ford F-250 Super Duty XL 1999-2004 Ford F-250 Super Duty XLT 2004 Ford F-350 Super Duty Harley-Davidson Edition 2003-2004 Ford F-350 Super Duty King Ranch 1999-2004 Ford F-350 Super Duty Lariat 1999-2004 Ford F-350 Super Duty XL 1999-2004 Ford F-350 Super Duty XLT

Our Multiple Shock system for GM HDs features an upper hoop constructed of 1.5 OD x .120 wall DOM tubing that attaches to the frame with the lower mount fastening to the stock lower control arm. This design places the shock load on the frame and large lower control arm as the factory intended it for increased strength and ball joint longevity. System allows use of Performance Shocks or Dirt Logic 2.0 Resi Shocks that have been extensively tuned for a quality ride both on and offroad.This Part Fits: Year Make Model Submodel 2003-2004 Ford Excursion Eddie Bauer 2000-2004 Ford Excursion Limited 2004 Ford Excursion XLS 2000-2004 Ford Excursion XLT 1999 Ford F-250 Base 1999 Ford F-250 Lariat 1999 Ford F-250 XL 1999 Ford F-250 XLT 2004 Ford F-250 Super Duty Harley-Davidson Edition 2004 Ford F-250 Super Duty King Ranch 1999-2004 Ford F-250 Super Duty Lariat 1999-2004 Ford F-250 Super Duty XL 1999-2004 Ford F-250 Super Duty XLT 2004 Ford F-350 Super Duty Harley-Davidson Edition 2003-2004 Ford F-350 Super Duty King Ranch 1999-2004 Ford F-350 Super Duty Lariat 1999-2004 Ford F-350 Super Duty XL 1999-2004 Ford F-350 Super Duty XLT

We offer front Dual Shock systems for the 1999-04 Super Duty. The front system attaches to the factory coil bucket and relocates the sway bar with billet end links and heims for proper shock clearances.This Part Fits: Year Make Model Submodel 2003-2005 Ford Excursion Eddie Bauer 2000-2005 Ford Excursion Limited 2004-2005 Ford Excursion XLS 2000-2005 Ford Excursion XLT 1999 Ford F-250 Base 1999 Ford F-250 Lariat 1999 Ford F-250 XL 1999 Ford F-250 XLT 2004 Ford F-250 Super Duty Harley-Davidson Edition 2004 Ford F-250 Super Duty King Ranch 1999-2004 Ford F-250 Super Duty Lariat 1999-2004 Ford F-250 Super Duty XL 1999-2004 Ford F-250 Super Duty XLT 2004 Ford F-350 Super Duty Harley-Davidson Edition 2003-2004 Ford F-350 Super Duty King Ranch 1999-2004 Ford F-350 Super Duty Lariat 1999-2004 Ford F-350 Super Duty XL 1999-2004 Ford F-350 Super Duty XLT

TIRE SIZE - 33/12.50R18 WHEEL - 18X9 W/4 1/2" BS W/MINOR TRIMMING; TIRE SIZE - 295/75R16 WHEEL - 16X9 W/4 5/8" BS W/MINOR TRIMMING; 31. FOR PRECISION CENTERING OF AXLE UNDER VEHICLE ORDER ADJUSTABLE TRAC BAR FTS451. WILL NOT FIT 1999-00 MODELS WITH TRAC BAR BOLT HEAD SIZE OF 5/8".This Part Fits: Year Make Model Submodel 1999 Ford F-250 Base 1999 Ford F-250 Lariat 1999 Ford F-250 XL 1999 Ford F-250 XLT 1999-2000 Ford F-250 Super Duty Lariat 1999-2000 Ford F-250 Super Duty XL 1999-2000 Ford F-250 Super Duty XLT 1999-2000 Ford F-350 Super Duty Lariat 1999-2000 Ford F-350 Super Duty XL 1999-2000 Ford F-350 Super Duty XLT

This high quality GM 2500HD lift kit offers an increased ride height for enthusiasts looking to run a 35in tall tire with enhanced offroad capabilities. The stance of the vehicle will become more level front to rear for an aggressive look. The factory GM upper control arms are replaced with Fabtech's heavy duty ball joint tubular arms. They are constructed with 1.50in OD DOM steel tubing and feature a high travel ball joint that is sizably larger than stock. This provides for increased strength both on and offroad. Fabtech sets the ball joint angle to allow for full travel without bind throughout the travel range. Fabtech's forged torsion bar keys replace the factory units and allow for additional ride height adjustment to work in conjunction with the new upper control arms. Fabtech offers their Performance shocks with this suspension. They are a twin tube shock that will provide a good highway ride with the ability to tackle offroad. This 3.5in HD lift kit comes with high quality components that add strength and reliability to the vehicle while giving it a commanding presence. Tubular Steel Upper Control Arms. Additional 1 degree of caster built in. 1.5in OD x .120in wall DOM tubing. High travel oversized ball joint. 2.25in OD x .250in wall DOM bushing barrels. Heavy duty forged torsion bar keys.This Part Fits: Year Make Model Submodel 2020-2021 Chevrolet Silverado 2500 HD High Country 2020-2021 Chevrolet Silverado 2500 HD LT 2020-2021 Chevrolet Silverado 2500 HD LTZ 2020-2021 GMC Sierra 2500 HD Base 2020-2021 GMC Sierra 2500 HD Denali 2020-2021 GMC Sierra 2500 HD SLE 2020-2021 GMC Sierra 2500 HD SLT 2020-2021 GMC Sierra 3500 HD Base 2020-2021 GMC Sierra 3500 HD Denali 2020-2021 GMC Sierra 3500 HD SLE 2020-2021 GMC Sierra 3500 HD SLT

Designed specifically for Trail Boss and AT4 owners that want a little more ride height out of their truck for clearance of full size 33/1250R 18 inch or 20 inch tires, this lift kit is the ticket. Fabtech's Upper Control Arm lift kit provides a 1.5" increased ride height on Trail Boss and AT4 models without creating suspension bind at full droop. These vehicles have a factory 2" lift. With the addition of this 1.5" lift kit, the vehicle will sit as high as a standard model with a 3.5" lift kit and clear a 33" tall tire. Lift is accomplished with an aluminum spacer at the top and a small preload spacer under the coil of the factory Coilover shock. This positions the Coilover properly to provide height without coil bind or over extending the travel that can lead to damaged suspension parts in the future. The tubular Upper Control Arms with heavy duty ball joints address the geometry of the front suspension with the new ride height for proper alignablity. Due to the new GM suspension geometry of the 2019, there are no differential drop brackets required for the CV axles to operate properly. Rear lift comes from 1" blocks and u bolts. Some owners may opt to not install the rear blocks if they desire to level the stance of the vehicle. The Stealth rear shocks are a monotube design that have a Nitrocarb piston rod for corrosion resistance and resist rock chipping. They?ll provide a great highway ride with good offroad damping capacity. FEATURES: Increased ground clearance, Extended range upper ball joints provide a smooth quiet ride, Increased fender clearance for 33? tall tires, Suspension can be restored to stock, Easy installation.

Designed specifically for Trail Boss and AT4 owners that want a little more ride height out of their truck for clearance of full size 33/1250R 18 inch or 20 inch tires, this lift kit is the ticket. Fabtech's Upper Control Arm lift kit provides a 1.5" increased ride height on Trail Boss and AT4 models without creating suspension bind at full droop. These vehicles have a factory 2" lift. With the addition of this 1.5" lift kit, the vehicle will sit as high as a standard model with a 3.5" lift kit and clear a 33" tall tire. Lift is accomplished with an aluminum spacer at the top and a small preload spacer under the coil of the factory Coilover shock. This positions the Coilover properly to provide height without coil bind or over extending the travel that can lead to damaged suspension parts in the future. The tubular Upper Control Arms with heavy duty ball joints address the geometry of the front suspension with the new ride height for proper alignablity. Due to the new GM suspension geometry of the 2019, there are no differential drop brackets required for the CV axles to operate properly. Rear lift comes from 1" blocks and u bolts. Some owners may opt to not install the rear blocks if they desire to level the stance of the vehicle. The Performance rear shocks are a twin tube design provide a good highway ride with the ability to handle offroad use. FEATURES: Increased ground clearance, Extended range upper ball joints provide a smooth quiet ride, Increased fender clearance for 33? tall tires, Suspension can be restored to stock, Easy installation.

Fabtech?s Upper Control Arm system provides a 3.5" increased ride height over stock without creating suspension bind at full droop. Lift is accomplished with steel spacers that utilizes the factory Adaptive Ride Control coilovers. The replacement Upper Control Arms address the geometry of the front suspension with the new ride height for proper alignablity. Heavy duty ball joints allow for extended travel to eliminate binding. Rear lift comes from 1.5" blocks and u-bolts. Heavy duty rear shock extension brackets retain the factory Adaptive Ride Control shocks for an outstanding ride quality. Features value priced system with Fabtech quality, increased ground clearance, extended range upper ball joints provide a smooth quiet ride, increased fender clearance compared to a Leveling Kit for 33? tall tires, suspension can be restored to stock, easy installation.This Part Fits: Year Make Model Submodel 2019-2020 Chevrolet Silverado 1500 Custom 2019-2020 Chevrolet Silverado 1500 High Country 2019-2020 Chevrolet Silverado 1500 LT 2019-2020 Chevrolet Silverado 1500 LTZ 2019-2020 Chevrolet Silverado 1500 WT 2019-2020 GMC Sierra 1500 Base 2019-2020 GMC Sierra 1500 Denali 2019-2020 GMC Sierra 1500 SLE 2019-2020 GMC Sierra 1500 SLT

This quality Upper Control Arm system provides a 3.5? increased ride height over stock without creating suspension bind at full droop. Lift is accomplished with spacers that utilizes the factory coilover shocks for a stock ride. The Fabtech Upper Control Arms address the geometry of the front suspension with the new ride height for proper align-ability. Heavy duty ball joints allow for extended travel to eliminate binding. Due to the GM suspension geometry there are no differential drop brackets required for the CV axles to operate properly. Rear lift comes from 1? blocks and u-bolts. Value priced system with Fabtech quality. Increased ground clearance. Extended range upper ball joints provide a smooth quiet ride. Increased fender clearance compared to a Leveling Kit for 33? tall tires. Suspension can be restored to stock. Easy installation. Includes rear Stealth Shocks.This Part Fits: Year Make Model Submodel 2019-2020 Chevrolet Silverado 1500 Custom 2019-2020 Chevrolet Silverado 1500 High Country 2019-2020 Chevrolet Silverado 1500 LT 2019-2020 Chevrolet Silverado 1500 LTZ 2019-2020 Chevrolet Silverado 1500 WT 2019-2020 GMC Sierra 1500 Base 2019-2020 GMC Sierra 1500 Denali 2019-2020 GMC Sierra 1500 SLE 2019-2020 GMC Sierra 1500 SLT

This quality Upper Control Arm system provides a 3.5? increased ride height over stock without creating suspension bind at full droop. Lift is accomplished with spacers that utilizes the factory coilover shocks for a stock ride. The Fabtech Upper Control Arms address the geometry of the front suspension with the new ride height for proper align-ability. Heavy duty ball joints allow for extended travel to eliminate binding. Due to the GM suspension geometry there are no differential drop brackets required for the CV axles to operate properly. Rear lift comes from 1? blocks and u-bolts. Value priced system with Fabtech quality. Increased ground clearance. Extended range upper ball joints provide a smooth quiet ride. Increased fender clearance compared to a Leveling Kit for 33? tall tires. Suspension can be restored to stock. Easy installation. Includes rear Performance Shocks.This Part Fits: Year Make Model Submodel 2019-2020 Chevrolet Silverado 1500 Custom 2019-2020 Chevrolet Silverado 1500 High Country 2019-2020 Chevrolet Silverado 1500 LT 2019-2020 Chevrolet Silverado 1500 LTZ 2019-2020 Chevrolet Silverado 1500 WT 2019-2020 GMC Sierra 1500 Base 2019-2020 GMC Sierra 1500 Denali 2019-2020 GMC Sierra 1500 SLE 2019-2020 GMC Sierra 1500 SLT

This system offers a mild lift height with easy installation for clearance of 33" tall tires on K1500's w/ factory Magnetic Ride Control suspension. Lift is accomplished by utilizing the factory front Coilover shocks with steel spacer system that helps retain the stock ride of the front suspension. The stock upper control arms are replaced with thick wall DOM tubular arms that feature heavy duty extended range ball joints. These ball joints provide additional strength to the vehicles suspension compared to the factory. The front differential is relocated to keep CV angles proper with the new lift height while a 1/4" thick steel skid plate provides protection against offroad obstacles. Rear lift is accomplished with 1 1/2" rear lift block and u-bolts to help level the stance of the vehicles. - Value priced system with Fabtech quality Increased ground clearance Extended range upper ball joints provide a smooth quiet ride Increased fender clearance compared to a Leveling Kit for 33" tall tires Suspension can be restored to stock.This Part Fits: Year Make Model Submodel 2016-2018 Chevrolet Silverado 1500 Custom 2016-2018 Chevrolet Silverado 1500 High Country 2016-2018 Chevrolet Silverado 1500 LS 2016-2018 Chevrolet Silverado 1500 LT 2016-2018 Chevrolet Silverado 1500 LTZ 2016-2018 Chevrolet Silverado 1500 SSV 2016-2018 Chevrolet Silverado 1500 WT 2014,2016-2018 GMC Sierra 1500 Base 2014,2016-2018 GMC Sierra 1500 Denali 2014,2016-2018 GMC Sierra 1500 SLE 2014,2016-2018 GMC Sierra 1500 SLT

The 4" Budget System for 2015 GM 1500 SUV's provides a mild lift height, supple ride and clearance for 33" tall tires satisfying the value minded enthusiast. Fabtech's replacement DOM upper tubular control arms feature heavy duty extended range ball joints that provide additional strength to the front suspension. The new ball joints provide unrestricted movement throughout the suspension travel range for smooth operation. On 4WD models the front differential housing is relocated to retain proper CV angles at the new ride height, while a 1/4" thick steel skid plate protects the front diff. This system works with MagnaRide and Non MagnaRide equipped vehicles.This Part Fits: Year Make Model Submodel 2015-2020 Chevrolet Suburban LS 2015-2020 Chevrolet Suburban LT 2015-2016 Chevrolet Suburban LTZ 2017-2020 Chevrolet Suburban Premier 2015-2020 Chevrolet Tahoe LS 2015-2020 Chevrolet Tahoe LT 2015-2016 Chevrolet Tahoe LTZ 2015-2020 Chevrolet Tahoe PPV 2017-2020 Chevrolet Tahoe Premier 2015-2020 Chevrolet Tahoe SSV 2015-2020 GMC Yukon Denali 2015-2020 GMC Yukon SLE 2015-2020 GMC Yukon SLT 2015-2020 GMC Yukon XL Denali 2015-2020 GMC Yukon XL SLE 2015-2020 GMC Yukon XL SLT

This system offers a mild lift height with easy installation for clearance of 33" tall tires on K1500's. Lift is accomplished by utilizing the factory front Coilover shocks with steel spacer system that helps retain the stock ride of the front suspension. The stock upper control arms are replaced with thick wall DOM tubular arms that feature heavy duty extended range ball joints. These ball joints provide additional strength to the vehicles suspension compared to the factory. The front differential is relocated to keep CV angles proper with the new lift height while a 1/4" thick steel skid plate provides protection against offroad obstacles. Rear lift is accomplished with 1 1/2" rear lift block and u-bolts to help level the stance of the vehicles. Performance rear shock absorbers replace the stock units for increased damping. - Value priced system with Fabtech quality Increased ground clearance Extended range upper ball joints provide a smooth quiet ride Increased fender clearance compared to a Leveling Kit for 33" tall tires Suspension can be restored to stock Easy installation.This Part Fits: Year Make Model Submodel 2016-2018 Chevrolet Silverado 1500 Custom 2014-2018 Chevrolet Silverado 1500 High Country 2015-2018 Chevrolet Silverado 1500 LS 2014-2018 Chevrolet Silverado 1500 LT 2014-2018 Chevrolet Silverado 1500 LTZ 2015-2018 Chevrolet Silverado 1500 SSV 2014-2018 Chevrolet Silverado 1500 WT 2014-2018 GMC Sierra 1500 Base 2014-2018 GMC Sierra 1500 Denali 2014-2018 GMC Sierra 1500 SLE 2014-2018 GMC Sierra 1500 SLT

This system offers a mild lift height with easy installation for clearance of 33" tall tires on K1500's. Lift is accomplished by utilizing the factory front Coilover shocks with steel spacer system that helps retain the stock ride of the front suspension. The stock upper control arms are replaced with thick wall DOM tubular arms that feature heavy duty extended range ball joints. These ball joints provide additional strength to the vehicles suspension compared to the factory. The front differential is relocated to keep CV angles proper with the new lift height while a 1/4" thick steel skid plate provides protection against offroad obstacles. Rear lift is accomplished with 1 1/2" rear lift block and u-bolts to help level the stance of the vehicles. Performance rear shock absorbers replace the stock units for increased damping. - Value priced system with Fabtech quality Increased ground clearance Extended range upper ball joints provide a smooth quiet ride Increased fender clearance compared to a Leveling Kit for 33" tall tires Suspension can be restored to stock.This Part Fits: Year Make Model Submodel 2016-2018 Chevrolet Silverado 1500 Custom 2014-2018 Chevrolet Silverado 1500 High Country 2015-2018 Chevrolet Silverado 1500 LS 2014-2018 Chevrolet Silverado 1500 LT 2014-2018 Chevrolet Silverado 1500 LTZ 2015-2018 Chevrolet Silverado 1500 SSV 2014-2018 Chevrolet Silverado 1500 WT 2014-2018 GMC Sierra 1500 Base 2014-2018 GMC Sierra 1500 Denali 2014-2018 GMC Sierra 1500 SLE 2014-2018 GMC Sierra 1500 SLT

The 4 Budget System for 2007-13 GM C/K1500 SUVs provides a mild lift height with a supple ride for use with 33 tall tires for the value minded enthusiast. Fabtechs replacement DOM upper tubular control arms feature heavy duty extended range ball joints that provide additional strength to the front suspension. The new ball joints provide unrestricted movement throughout the suspension travel range for smooth operation. On 4WD models the front differential housing is relocated to keep CV angles proper with the new ride height while a 1/ 4 thick steel skid plate protects the front diff. The rear lift comes from a 2 Coil Spacer system. The 4 Budget is available with two shock configurations. One utilizes the stock front Coilover shocks with upper spacers along and rear Performance Shocks. The second option for increased damping is the high end Dirt Logic 2.5 Coilovers for the front and Dirt Logic 2.25 shocks on the rear.This Part Fits: Year Make Model Submodel 2013 Chevrolet Avalanche Black Diamond LS 2013 Chevrolet Avalanche Black Diamond LT 2013 Chevrolet Avalanche Black Diamond LTZ 2007-2012 Chevrolet Avalanche LS 2007-2012 Chevrolet Avalanche LT 2007-2012 Chevrolet Avalanche LTZ 2007-2014 Chevrolet Suburban 1500 LS 2007-2014 Chevrolet Suburban 1500 LT 2007-2014 Chevrolet Suburban 1500 LTZ 2008-2013 Chevrolet Tahoe Hybrid 2007-2014 Chevrolet Tahoe LS 2007-2014 Chevrolet Tahoe LT 2007-2014 Chevrolet Tahoe LTZ 2012-2014 Chevrolet Tahoe PPV 2012-2014 Chevrolet Tahoe SSV 2007-2014 GMC Yukon Denali 2010-2013 GMC Yukon Denali Hybrid 2008-2013 GMC Yukon Hybrid 2007-2014 GMC Yukon SLE 2007-2014 GMC Yukon SLT 2007-2014 GMC Yukon XL 1500 Denali 2007-2014 GMC Yukon XL 1500 SLE 2007-2014 GMC Yukon XL 1500 SLT

Designed for the value minded enthusiast, the 4" Budget System for GM C/K1500's provides a mild lift height with a supple ride for use with 33" tall tires. Fabtech's replacement DOM upper tubular control arms feature heavy duty extended range ball joints that provide additional strength to the front suspension. The new ball joints provide unrestricted movement throughout the suspension travel range for smooth operation. The front differential housing is relocated to keep CV angles proper with the new ride height while a 1/4" thick steel skid plate protects the front diff. The rear lift comes from a 1 1/2" lift block and u bolt system. The 4" Budget System is available with two shock configurations. One utilizes the stock front Coilover shocks with upper spacers along and rear Stealth Shocks. The second option for increased damping is the high end Dirt Logic 2.5 Coilovers for the front and Dirt Logic 2.25 shocks on the rear.This Part Fits: Year Make Model Submodel 2016-2018 Chevrolet Silverado 1500 Custom 2014-2018 Chevrolet Silverado 1500 High Country 2009-2013 Chevrolet Silverado 1500 Hybrid 2007-2013,2015-2018 Chevrolet Silverado 1500 LS 2007-2018 Chevrolet Silverado 1500 LT 2007-2018 Chevrolet Silverado 1500 LTZ 2015-2018 Chevrolet Silverado 1500 SSV 2007-2018 Chevrolet Silverado 1500 WT 2010-2013 Chevrolet Silverado 1500 XFE 2014-2018 GMC Sierra 1500 Base 2007-2018 GMC Sierra 1500 Denali 2009-2013 GMC Sierra 1500 Hybrid 2007-2013 GMC Sierra 1500 SL 2007-2018 GMC Sierra 1500 SLE 2007-2018 GMC Sierra 1500 SLT 2007-2013 GMC Sierra 1500 WT 2010-2013 GMC Sierra 1500 XFE

Designed for the value minded enthusiast, the 4" Budget System for 2007-13 GM C/K1500's provides a mild lift height with a supple ride for use with 33" tall tires. Fabtech's replacement DOM upper tubular control arms feature heavy duty extended range ball joints that provide additional strength to the front suspension. The new ball joints provide unrestricted movement throughout the suspension travel range for smooth operation. The front differential housing is relocated to keep CV angles proper with the new ride height while a 1/4" thick steel skid plate protects the front diff. The rear lift comes from a 1 1/2" lift block and u bolt system. The 4" Budget System is available with two shock configurations. One utilizes the stock front Coilover shocks with upper spacers along and rear Performance Shocks. The second option for increased damping is the high end Dirt Logic 2.5 Coilovers for the front and Dirt Logic 2.25 shocks on the rear.This Part Fits: Year Make Model Submodel 2016-2018 Chevrolet Silverado 1500 Custom 2014-2018 Chevrolet Silverado 1500 High Country 2009-2013 Chevrolet Silverado 1500 Hybrid 2007-2013,2015-2018 Chevrolet Silverado 1500 LS 2007-2018 Chevrolet Silverado 1500 LT 2007-2018 Chevrolet Silverado 1500 LTZ 2015-2018 Chevrolet Silverado 1500 SSV 2007-2018 Chevrolet Silverado 1500 WT 2010-2013 Chevrolet Silverado 1500 XFE 2014-2018 GMC Sierra 1500 Base 2007-2018 GMC Sierra 1500 Denali 2009-2013 GMC Sierra 1500 Hybrid 2007-2013 GMC Sierra 1500 SL 2007-2018 GMC Sierra 1500 SLE 2007-2018 GMC Sierra 1500 SLT 2007-2013 GMC Sierra 1500 WT 2010-2013 GMC Sierra 1500 XFE

2018-20 Jeep JL 4WD 4-DOOR. Heavy duty rear driveshaft for Jeep JL 4-door models. Heavy Duty Rear Driveshaft.This Part Fits: Year Make Model Submodel 2022-2023 Jeep Wrangler Rubicon 2022 Jeep Wrangler Sport 2022-2023 Jeep Wrangler Sport S 2021 Jeep Wrangler Unlimited 80th Anniversary 2021 Jeep Wrangler Unlimited Freedom 2021-2023 Jeep Wrangler Unlimited High Altitude 2022-2023 Jeep Wrangler Unlimited High Altitude 4xe 2022-2023 Jeep Wrangler Unlimited High Tide 2021 Jeep Wrangler Unlimited Islander 2018-2023 Jeep Wrangler Unlimited Rubicon 2021-2023 Jeep Wrangler Unlimited Rubicon 392 2022-2023 Jeep Wrangler Unlimited Rubicon 4xe 2018-2023 Jeep Wrangler Unlimited Sahara 2022-2023 Jeep Wrangler Unlimited Sahara 4xe 2021-2023 Jeep Wrangler Unlimited Sahara Altitude 2018-2023 Jeep Wrangler Unlimited Sport 2021-2023 Jeep Wrangler Unlimited Sport Altitude 2018-2023 Jeep Wrangler Unlimited Sport S 2021-2023 Jeep Wrangler Unlimited Willys 2021-2023 Jeep Wrangler Unlimited Willys Sport 2022-2023 Jeep Wrangler Willys 2022-2023 Jeep Wrangler Willys Sport

This heavy duty double cardian front driveshaft has been designed to work in conjunction with our HD suspension systems. This specialty driveshaft has been built to provide vibration free driveline operation in 4WD high at highway speeds.This Part Fits: Year Make Model Submodel 2016 Jeep Wrangler Unlimited 75th Anniversary 2012-2017 Jeep Wrangler Unlimited Rubicon 2012-2017 Jeep Wrangler Unlimited Sahara 2012-2017 Jeep Wrangler Unlimited Sport 2016 Jeep Wrangler Unlimited Sport S 2018 Jeep Wrangler JK Unlimited Rubicon 2018 Jeep Wrangler JK Unlimited Sahara 2018 Jeep Wrangler JK Unlimited Sport

This heavy duty double cardian front driveshaft has been designed to work in conjunction with our HD suspension systems. This specialty driveshaft has been built to provide vibration free driveline operation in 4WD high at highway speeds.This Part Fits: Year Make Model Submodel 2016 Jeep Wrangler 75th Anniversary 2012-2017 Jeep Wrangler Rubicon 2012-2017 Jeep Wrangler Sahara 2012-2017 Jeep Wrangler Sport 2016 Jeep Wrangler Sport S 2018 Jeep Wrangler JK Rubicon 2018 Jeep Wrangler JK Sahara 2018 Jeep Wrangler JK Sport

This heavy duty double cardian front driveshaft has been designed to work in conjunction with our HD suspension systems. This specialty driveshaft has been built to provide vibration free driveline operation in 4WD high at highway speeds.This Part Fits: Year Make Model Submodel 2011 Jeep Wrangler 70th Anniversary 2016 Jeep Wrangler 75th Anniversary 2021 Jeep Wrangler 80th Anniversary 2021 Jeep Wrangler Freedom 2021 Jeep Wrangler Islander 2007-2023 Jeep Wrangler Rubicon 2007-2017 Jeep Wrangler Sahara 2010-2022 Jeep Wrangler Sport 2016,2018-2023 Jeep Wrangler Sport S 2011 Jeep Wrangler Unlimited 70th Anniversary 2016 Jeep Wrangler Unlimited 75th Anniversary 2021 Jeep Wrangler Unlimited 80th Anniversary 2021 Jeep Wrangler Unlimited Freedom 2021-2023 Jeep Wrangler Unlimited High Altitude 2022-2023 Jeep Wrangler Unlimited High Altitude 4xe 2022-2023 Jeep Wrangler Unlimited High Tide 2021 Jeep Wrangler Unlimited Islander 2019 Jeep Wrangler Unlimited Moab 2007-2023 Jeep Wrangler Unlimited Rubicon 2021-2023 Jeep Wrangler Unlimited Rubicon 392 2022-2023 Jeep Wrangler Unlimited Rubicon 4xe 2007-2023 Jeep Wrangler Unlimited Sahara 2022-2023 Jeep Wrangler Unlimited Sahara 4xe 2021-2023 Jeep Wrangler Unlimited Sahara Altitude 2010-2023 Jeep Wrangler Unlimited Sport 2021-2023 Jeep Wrangler Unlimited Sport Altitude 2016,2018-2023 Jeep Wrangler Unlimited Sport S 2021-2023 Jeep Wrangler Unlimited Willys 2021-2023 Jeep Wrangler Unlimited Willys Sport 2007-2010 Jeep Wrangler Unlimited X 2021-2023 Jeep Wrangler Willys 2021-2023 Jeep Wrangler Willys Sport 2007-2010 Jeep Wrangler X 2018 Jeep Wrangler JK Rubicon 2018 Jeep Wrangler JK Sahara 2018 Jeep Wrangler JK Sport 2018 Jeep Wrangler JK Unlimited Rubicon 2018 Jeep Wrangler JK Unlimited Sahara 2018 Jeep Wrangler JK Unlimited Sport

This heavy duty double cardian front driveshaft has been designed to work in conjunction with our HD suspension systems. This specialty driveshaft has been built to provide vibration free driveline operation in 4WD high at highway speeds.This Part Fits: Year Make Model Submodel 2007-2008 Jeep Wrangler Unlimited Rubicon 2007-2008 Jeep Wrangler Unlimited Sahara 2007-2008 Jeep Wrangler Unlimited X

This heavy duty double cardian front driveshaft has been designed to work in conjunction with our HD suspension systems. This specialty driveshaft has been built to provide vibration free driveline operation in 4WD high at highway speeds.This Part Fits: Year Make Model Submodel 2011 Jeep Wrangler 70th Anniversary 2007-2011 Jeep Wrangler Rubicon 2007-2011 Jeep Wrangler Sahara 2010-2011 Jeep Wrangler Sport 2007-2010 Jeep Wrangler X

This heavy duty double cardian front driveshaft has been designed to work in conjunction with our HD suspension systems. This specialty driveshaft has been built to provide vibration free driveline operation in 4WD high at highway speeds.This Part Fits: Year Make Model Submodel 2017,2020-2021 Ford F-250 Super Duty King Ranch 2017,2020-2021 Ford F-250 Super Duty Lariat 2017,2020-2021 Ford F-250 Super Duty Platinum 2017,2020-2021 Ford F-250 Super Duty XL 2017,2020-2021 Ford F-250 Super Duty XLT 2017,2020-2021 Ford F-350 Super Duty King Ranch 2017,2020-2021 Ford F-350 Super Duty Lariat 2017,2020-2021 Ford F-350 Super Duty Platinum 2017,2020-2021 Ford F-350 Super Duty XL 2017,2020-2021 Ford F-350 Super Duty XLT

This heavy duty double cardian front driveshaft has been designed to work in conjunction with our HD suspension systems. This specialty driveshaft has been built to provide vibration free driveline operation in 4WD high at highway speeds.This Part Fits: Year Make Model Submodel 2017,2020-2021 Ford F-250 Super Duty King Ranch 2017,2020-2021 Ford F-250 Super Duty Lariat 2020-2021 Ford F-250 Super Duty Limited 2017,2020-2021 Ford F-250 Super Duty Platinum 2017,2020-2021 Ford F-250 Super Duty XL 2017,2020-2021 Ford F-250 Super Duty XLT 2017,2020-2021 Ford F-350 Super Duty King Ranch 2017,2020-2021 Ford F-350 Super Duty Lariat 2020-2021 Ford F-350 Super Duty Limited 2017,2020-2021 Ford F-350 Super Duty Platinum 2017,2020-2021 Ford F-350 Super Duty XL 2017,2020-2021 Ford F-350 Super Duty XLT

This heavy duty double cardian front driveshaft has been designed to work in conjunction with our 8in HD suspension systems. This specialty driveshaft has been built to provide vibration free driveline operation in 4WD high at highway speeds. FOR USE WITH 8in SYSTEMS ONLY.This Part Fits: Year Make Model Submodel 2007-2008 Chevrolet Silverado 2500 HD LT 2007-2008 Chevrolet Silverado 2500 HD LTZ 2007-2008 Chevrolet Silverado 2500 HD WT 2007 Chevrolet Silverado 2500 HD Classic LS 2007 Chevrolet Silverado 2500 HD Classic LT 2007 Chevrolet Silverado 2500 HD Classic WT 2007-2008 GMC Sierra 2500 HD SLE 2007-2008 GMC Sierra 2500 HD SLT 2007-2008 GMC Sierra 2500 HD WT 2007 GMC Sierra 2500 HD Classic SL 2007 GMC Sierra 2500 HD Classic SLE 2007 GMC Sierra 2500 HD Classic SLT 2007 GMC Sierra 2500 HD Classic WT

Fabtech Pass Front Spindle

Fabtech D/S Spindle

Fabtech Pass Side Spindle