The CSF x Rogue oil cooler uses a Bar & Plate construction (vs. tube and fin) in a top/bottom configuration. The Bar & Plate design makes the cooler much more robust and able to take abuse from debris hitting it at high speeds on the road or track. The cooler uses extruded end tanks which means it is a much stronger design than simple bent aluminum sheet construction found on the oem unit. The cooler is a bolt on design for the factory radiator or the CSF High-Performance Radiators (E46 M3 - CSF #7058 / E39 M5 - #7064) and uses the factory oil cooler lines.This Part Fits: Year Make Model Submodel 1995,1997-2003 BMW 540i Base 2001-2006 BMW M3 Base 2000-2003 BMW M5 Base

CSF has over 5 decades of experience manufacturing radiators. So when it comes to keeping your engine cool and your E46 M3 running at its best, a CSF High-Performance All-Aluminum Radiator is the obvious choice. Designed to perform on the street or at the track, a performance radiator is a must-have for both high horsepower builds as well as race vehicles which need added cooling performance in motorsports environments. The Triple-Pass Flow Structure allows the coolant to flow across the core of the radiator three times before exiting for lowest outlet temperatures possible. This radiator features a 2-Row core with CSF's exclusive B-Tube Technology: Unlike a regular oval shape "O" type radiator tube, CSF uses a specially engineered tube in the shape of a "B". These "B-tubes" are carefully formed and then brazed over the seam to seal. CSF is able to use thinner and lighter aluminum material (with better cooling efficiency) because this design is actually stronger than normal "O" shape tubes that are welded. The design (inlet in the middle of the tube that is seam brazed) increases the heat transfer surface area of the tubes by approximately 15% over regular tubes - producing the efficiency of two smaller tubes vs. one large tube within the same space criteria. With "B-tubes" you are able to get "dual liquid laminar flow". CSF also uses ultra efficient multi louvered fins that are carefully and precisely aligned to maximize airflow through each radiator core. Fin specifications are carefully measured and calculated for each application, and tested for maximum heat rejection efficiency in our wind-tunnel lab.This Part Fits: Year Make Model Submodel 2001-2006 BMW M3 Base

CSF 02-03 Isuzu NPR 4.8L OEM Plastic Radiator

CSF has over 5 decades of experience manufacturing radiators. So when it comes to keeping your engine cool and your WRX/STI running at its best, a CSF High-Performance All-Aluminum Radiator is the obvious choice. Designed to perform on the street or at the track, a performance radiator is a must-have for both high horsepower builds as well as race vehicles which need added cooling performance in motorsports environments. This radiator features a 2-Row core with CSF's exclusive B-Tube Technology: Unlike a regular oval shape "O" type radiator tube, CSF uses a specially engineered tube in the shape of a "B". These "B-tubes" are carefully formed and then brazed over the seam to seal. CSF is able to use thinner and lighter aluminum material (with better cooling efficiency) because this design is actually stronger than normal "O" shape tubes that are welded. The design (inlet in the middle of the tube that is seam brazed) increases the heat transfer surface area of the tubes by approximately 15% over regular tubes - producing the efficiency of two smaller tubes vs. one large tube within the same space criteria. With "B-tubes" you are able to get "dual liquid laminar flow". CSF also uses ultra efficient multi louvered fins that are carefully and precisely aligned to maximize airflow through each radiator core. Fin specifications are carefully measured and calculated for each application, and tested for maximum heat rejection efficiency in our wind-tunnel lab.This Part Fits: Year Make Model Submodel 2006-2007 Subaru Impreza 2.5i 2002-2004 Subaru Impreza Outback 2005-2007 Subaru Impreza Outback Sport 2002-2005 Subaru Impreza RS 2002-2004 Subaru Impreza TS 2002-2007 Subaru Impreza WRX 2006-2007 Subaru Impreza WRX Limited 2004-2007 Subaru Impreza WRX STI 2007 Subaru Impreza WRX STI Limited 2006-2007 Subaru Impreza WRX TR

CSF 04-08 Freightliner Columbia/Argosy OEM Intercooler

CSF 05-08 Isuzu NPR 5.2L OEM Plastic Radiator

CSF has over 5 decades of experience manufacturing radiators. So when it comes to keeping your engine cool and your Mustang running at its best, a CSF High-Performance All-Aluminum Radiator is the obvious choice. Designed to perform on the street or at the track, a performance radiator is a must-have for both high horsepower builds as well as race vehicles which need added cooling performance in motorsports environments. This radiator features a 2-Row core with CSF's exclusive B-Tube Technology: Unlike a regular oval shape "O" type radiator tube, CSF uses a specially engineered tube in the shape of a "B". These "B-tubes" are carefully formed and then brazed over the seam to seal. CSF is able to use thinner and lighter aluminum material (with better cooling efficiency) because this design is actually stronger than normal "O" shape tubes that are welded. The design (inlet in the middle of the tube that is seam brazed) increases the heat transfer surface area of the tubes by approximately 15% over regular tubes - producing the efficiency of two smaller tubes vs. one large tube within the same space criteria. With "B-tubes" you are able to get "dual liquid laminar flow". CSF also uses ultra efficient multi louvered fins that are carefully and precisely aligned to maximize airflow through each radiator core. Fin specifications are carefully measured and calculated for each application, and tested for maximum heat rejection efficiency in our wind-tunnel lab.This Part Fits: Year Make Model Submodel 2005-2014 Ford Mustang Base 2012-2013 Ford Mustang Boss 302 2008-2009 Ford Mustang Bullitt 2005-2014 Ford Mustang GT 2007-2008 Ford Mustang Shelby GT 2007-2013 Ford Mustang Shelby GT500 2008-2009 Ford Mustang Shelby GT500KR

The factory radiator for the E60 M5 and E6X M6 are pretty nice all aluminum units. While they have proven to be fairly robust, age and additional power tend to push them over the edge. Owners who have superchargers tend to have the most issues with their radiators. Between the extra heat produced with forced induction and the heat exchanger mounting in front of the radiator, the factory radiator is working overtime. The E6X models are also getting close to 20 years old and entering the "future classic" stage of life with many owners doing restorations and updates. Anyone who has restored/updated an older car knows the value of having upgraded parts that are as efficient as possible.This Part Fits: Year Make Model Submodel 2006-2010 BMW M5 Base 2006-2010 BMW M6 Base

The original OE oil cooler from BMW is an all metal design which would make you think it would be fairly robust. However, there are several weak spots in the design that tend to cause leaks. The CSF Race-Spec design reinforces the weak points, especially around the feed and return lines. CSF's solid line connection block can handle any abuse thrown at it while the reinforced and braced return tube is rock solid. CSF also upgraded the more fragile Tub/Fin core to a robust and durable Bar/Plate design. The core is 40% larger than the factory unit with 2 additional rows of oil cooling and much thicker core (63mm vs OE 45mm). This offers superior cooling capacity and volume for the oil system. TIG welded end tanks round out the slew of upgrades creating a much stronger connection than the factory brazed construction.This Part Fits: Year Make Model Submodel 2006-2010 BMW M5 Base 2006-2010 BMW M6 Base

CSF has over 5 decades of experience manufacturing radiators. So when it comes to keeping your engine cool and your H3 Hummer running at its best, a CSF Heavy-Duty/High-Performance All-Aluminum Radiator is the obvious choice. Designed to perform on and off road, a heavy-duty performance radiator is a must-have for off-roaders, overlanders, and adventurers. This radiator features a 2-Row core with CSF's exclusive B-Tube Technology: Unlike a regular oval shape "O" type radiator tube, CSF uses a specially engineered tube in the shape of a "B". These "B-tubes" are carefully formed and then brazed over the seam to seal. CSF is able to use thinner and lighter aluminum material (with better cooling efficiency) because this design is actually stronger than normal "O" shape tubes that are welded. The design (inlet in the middle of the tube that is seam brazed) increases the heat transfer surface area of the tubes by approximately 15% over regular tubes - producing the efficiency of two smaller tubes vs. one large tube within the same space criteria. With "B-tubes" you are able to get "dual liquid laminar flow". CSF also uses ultra efficient multi louvered fins that are carefully and precisely aligned to maximize airflow through each radiator core. Fin specifications are carefully measured and calculated for each application, and tested for maximum heat rejection efficiency in our wind-tunnel lab.This Part Fits: Year Make Model Submodel 2009-2012 Chevrolet Colorado LT 2009-2012 GMC Canyon SLE 2009-2012 GMC Canyon SLT 2008-2009 Hummer H3 Adventure 2008-2010 Hummer H3 Alpha 2006-2010 Hummer H3 Base 2009 Hummer H3 Championship Series 2008-2009 Hummer H3 Luxury 2007-2009 Hummer H3 X 2009-2010 Hummer H3T Alpha 2009-2010 Hummer H3T Base

CSF has over 5 decades of experience manufacturing radiators. So when it comes to keeping your engine cool and your FJ Cruiser running at its best, a CSF Heavy-Duty/High-Performance All-Aluminum Radiator is the obvious choice. Designed to perform on and off road, a heavy-duty performance radiator is a must-have for off-roaders, overlanders, and adventurers. This radiator features a 2-Row core with CSF's exclusive B-Tube Technology: Unlike a regular oval shape "O" type radiator tube, CSF uses a specially engineered tube in the shape of a "B". These "B-tubes" are carefully formed and then brazed over the seam to seal. CSF is able to use thinner and lighter aluminum material (with better cooling efficiency) because this design is actually stronger than normal "O" shape tubes that are welded. The design (inlet in the middle of the tube that is seam brazed) increases the heat transfer surface area of the tubes by approximately 15% over regular tubes - producing the efficiency of two smaller tubes vs. one large tube within the same space criteria. With "B-tubes" you are able to get "dual liquid laminar flow". CSF also uses ultra efficient multi louvered fins that are carefully and precisely aligned to maximize airflow through each radiator core. Fin specifications are carefully measured and calculated for each application, and tested for maximum heat rejection efficiency in our wind-tunnel lab.This Part Fits: Year Make Model Submodel 2003-2009 Toyota 4Runner Limited 2003-2009 Toyota 4Runner Sport 2003-2009 Toyota 4Runner SR5 2007-2014 Toyota FJ Cruiser Base 2008 Toyota FJ Cruiser Trail Teams Special Edition 2007 Toyota FJ Cruiser TRD Special Edition

CSF 06-94 Peterbilt 377-379 Series OEM Intercooler

CSF 07-10 Volvo VHD104F 12.1L OEM Intercooler

The engineers over at CSF know cooling. So when it comes to keeping your engine oil temps down as you push your E9X M3 hard on the street or track, a CSF Oil Cooler is the obvious choice. Engine oil temperatures are a big concern to anyone who tracks their vehicle or pushes it hard on hot days. High oil temperatures in modern cars will send you into "Limp Mode" in order to protect the engine but slows you down to a crawl and is overall an unpleasant experience. Old vehicles without these safeties built in can experience major engine damage if oil temperatures get too high. In any case, overheating engine oil is a bad thing, so why not do the most you can to keep them in check and don't let something like this spoil you fun or ruin your vehicle.This Part Fits: Year Make Model Submodel 2008-2013 BMW M3 Base

CSF has over 5 decades of experience manufacturing radiators. So when it comes to keeping your engine cool and your E9X M3 running at its best, a CSF High-Performance All-Aluminum Radiator is the obvious choice. Designed to perform on the street or at the track, a performance radiator is a must-have for both high horsepower builds as well as race vehicles which need added cooling performance in motorsports environments. The Triple-Pass Flow Structure allows the coolant to flow across the core of the radiator three times before exiting for lowest outlet temperatures possible. This radiator features a 2-Row core with CSF's exclusive B-Tube Technology: Unlike a regular oval shape "O" type radiator tube, CSF uses a specially engineered tube in the shape of a "B". These "B-tubes" are carefully formed and then brazed over the seam to seal. CSF is able to use thinner and lighter aluminum material (with better cooling efficiency) because this design is actually stronger than normal "O" shape tubes that are welded. The design (inlet in the middle of the tube that is seam brazed) increases the heat transfer surface area of the tubes by approximately 15% over regular tubes - producing the efficiency of two smaller tubes vs. one large tube within the same space criteria. With "B-tubes" you are able to get "dual liquid laminar flow". CSF also uses ultra efficient multi louvered fins that are carefully and precisely aligned to maximize airflow through each radiator core. Fin specifications are carefully measured and calculated for each application, and tested for maximum heat rejection efficiency in our wind-tunnel lab.This Part Fits: Year Make Model Submodel 2008-2013 BMW M3 Base

CSF has over 5 decades of experience manufacturing radiators. So when it comes to keeping your engine cool and your Wrangler running at its best, a CSF Heavy-Duty/High-Performance All-Aluminum Radiator is the obvious choice. Designed to perform on and off road, a heavy-duty performance radiator is a must-have for off-roaders, overlanders, and adventurers. This radiator features a 2-Row core with CSF's exclusive B-Tube Technology: Unlike a regular oval shape "O" type radiator tube, CSF uses a specially engineered tube in the shape of a "B". These "B-tubes" are carefully formed and then brazed over the seam to seal. CSF is able to use thinner and lighter aluminum material (with better cooling efficiency) because this design is actually stronger than normal "O" shape tubes that are welded. The design (inlet in the middle of the tube that is seam brazed) increases the heat transfer surface area of the tubes by approximately 15% over regular tubes - producing the efficiency of two smaller tubes vs. one large tube within the same space criteria. With "B-tubes" you are able to get "dual liquid laminar flow". CSF also uses ultra efficient multi louvered fins that are carefully and precisely aligned to maximize airflow through each radiator core. Fin specifications are carefully measured and calculated for each application, and tested for maximum heat rejection efficiency in our wind-tunnel lab.This Part Fits: Year Make Model Submodel 2011 Jeep Wrangler 70th Anniversary 2007-2012 Jeep Wrangler Rubicon 2007-2012 Jeep Wrangler Sahara 2010-2012 Jeep Wrangler Sport 2011 Jeep Wrangler Unlimited 70th Anniversary 2007-2012 Jeep Wrangler Unlimited Rubicon 2007-2012 Jeep Wrangler Unlimited Sahara 2010-2012 Jeep Wrangler Unlimited Sport 2007-2010 Jeep Wrangler Unlimited X 2007-2010 Jeep Wrangler X

CSF has over 5 decades of experience manufacturing radiators. So when it comes to keeping your engine cool and your Tundra/Sequoia running at its best, a CSF Heavy-Duty/High-Performance All-Aluminum Radiator is the obvious choice. Designed to perform on and off road, a heavy-duty performance radiator is a must-have for off-roaders, overlanders, and adventurers. This radiator features a 2-Row core with CSF's exclusive B-Tube Technology: Unlike a regular oval shape "O" type radiator tube, CSF uses a specially engineered tube in the shape of a "B". These "B-tubes" are carefully formed and then brazed over the seam to seal. CSF is able to use thinner and lighter aluminum material (with better cooling efficiency) because this design is actually stronger than normal "O" shape tubes that are welded. The design (inlet in the middle of the tube that is seam brazed) increases the heat transfer surface area of the tubes by approximately 15% over regular tubes - producing the efficiency of two smaller tubes vs. one large tube within the same space criteria. With "B-tubes" you are able to get "dual liquid laminar flow". CSF also uses ultra efficient multi louvered fins that are carefully and precisely aligned to maximize airflow through each radiator core. Fin specifications are carefully measured and calculated for each application, and tested for maximum heat rejection efficiency in our wind-tunnel lab.This Part Fits: Year Make Model Submodel 2008-2022 Toyota Sequoia Limited 2021-2022 Toyota Sequoia Nightshade 2008-2022 Toyota Sequoia Platinum 2008-2022 Toyota Sequoia SR5 2020-2022 Toyota Sequoia TRD Pro 2018-2022 Toyota Sequoia TRD Sport 2014-2021 Toyota Tundra 1794 Edition 2007-2013 Toyota Tundra Base 2007-2021 Toyota Tundra Limited 2021 Toyota Tundra Nightshade 2010-2021 Toyota Tundra Platinum 2014-2021 Toyota Tundra SR 2007-2011,2014-2021 Toyota Tundra SR5 2021 Toyota Tundra Trail 2015-2017,2019-2021 Toyota Tundra TRD Pro

CSF has over 5 decades of experience manufacturing radiators. So when it comes to keeping your engine cool and your 370Z/G37 running at its best, a CSF High-Performance All-Aluminum Radiator is the obvious choice. Designed to perform on the street or at the track, a performance radiator is a must-have for both high horsepower builds as well as race vehicles which need added cooling performance in motorsports environments. This radiator features a 2-Row core with CSF's exclusive B-Tube Technology: Unlike a regular oval shape "O" type radiator tube, CSF uses a specially engineered tube in the shape of a "B". These "B-tubes" are carefully formed and then brazed over the seam to seal. CSF is able to use thinner and lighter aluminum material (with better cooling efficiency) because this design is actually stronger than normal "O" shape tubes that are welded. The design (inlet in the middle of the tube that is seam brazed) increases the heat transfer surface area of the tubes by approximately 15% over regular tubes - producing the efficiency of two smaller tubes vs. one large tube within the same space criteria. With "B-tubes" you are able to get "dual liquid laminar flow". CSF also uses ultra efficient multi louvered fins that are carefully and precisely aligned to maximize airflow through each radiator core. Fin specifications are carefully measured and calculated for each application, and tested for maximum heat rejection efficiency in our wind-tunnel lab.This Part Fits: Year Make Model Submodel 2011-2012 INFINITI G25 Base 2011-2012 INFINITI G25 Journey 2011-2012 INFINITI G25 X 2007-2008 INFINITI G35 Base 2007-2008 INFINITI G35 Journey 2007-2008 INFINITI G35 Sport 2007-2008 INFINITI G35 X 2008-2013 INFINITI G37 Base 2011-2013 INFINITI G37 IPL 2008-2013 INFINITI G37 Journey 2008-2013 INFINITI G37 Sport 2009-2013 INFINITI G37 X 2015 INFINITI Q40 Base 2014-2015 INFINITI Q60 Base 2014-2015 INFINITI Q60 IPL 2014-2015 INFINITI Q60 Journey 2015 INFINITI Q60 S Limited 2010 Nissan 370Z 40th Anniversary Edition 2009-2020 Nissan 370Z Base 2018-2019 Nissan 370Z Heritage Edition 2009-2017,2019-2020 Nissan 370Z Nismo 2015-2018 Nissan 370Z Nismo Tech 2015-2020 Nissan 370Z Sport 2015-2018 Nissan 370Z Sport Tech 2019-2020 Nissan 370Z Sport Touring 2009-2019 Nissan 370Z Touring 2015-2018 Nissan 370Z Touring Sport

CSF has over 5 decades of experience manufacturing radiators. So when it comes to keeping your engine cool and your WRX/STI running at its best, a CSF High-Performance All-Aluminum Radiator is the obvious choice. Designed to perform on the street or at the track, a performance radiator is a must-have for both high horsepower builds as well as race vehicles which need added cooling performance in motorsports environments. This radiator features a 2-Row core with CSF's exclusive B-Tube Technology: Unlike a regular oval shape "O" type radiator tube, CSF uses a specially engineered tube in the shape of a "B". These "B-tubes" are carefully formed and then brazed over the seam to seal. CSF is able to use thinner and lighter aluminum material (with better cooling efficiency) because this design is actually stronger than normal "O" shape tubes that are welded. The design (inlet in the middle of the tube that is seam brazed) increases the heat transfer surface area of the tubes by approximately 15% over regular tubes - producing the efficiency of two smaller tubes vs. one large tube within the same space criteria. With "B-tubes" you are able to get "dual liquid laminar flow". CSF also uses ultra efficient multi louvered fins that are carefully and precisely aligned to maximize airflow through each radiator core. Fin specifications are carefully measured and calculated for each application, and tested for maximum heat rejection efficiency in our wind-tunnel lab.This Part Fits: Year Make Model Submodel 2016-2017 Subaru Crosstrek Base 2016 Subaru Crosstrek Hybrid 2016 Subaru Crosstrek Hybrid Touring 2016-2017 Subaru Crosstrek Limited 2016-2017 Subaru Crosstrek Premium 2009-2013 Subaru Forester X 2009-2013 Subaru Forester X Premium 2011-2013 Subaru Forester X Touring 2009-2010 Subaru Impreza 2.5 GT 2008-2011 Subaru Impreza 2.5i 2010-2011 Subaru Impreza 2.5i Premium 2012-2016 Subaru Impreza Base 2012-2016 Subaru Impreza Limited 2008-2011 Subaru Impreza Outback Sport 2012-2016 Subaru Impreza Premium 2012-2016 Subaru Impreza Sport Limited 2012-2016 Subaru Impreza Sport Premium 2008-2014 Subaru Impreza WRX 2010-2014 Subaru Impreza WRX Limited 2009-2014 Subaru Impreza WRX Premium 2008-2014 Subaru Impreza WRX STI 2011-2014 Subaru Impreza WRX STI Limited 2010 Subaru Impreza WRX STI Special Edition 2006-2009 Subaru Legacy 2.5i 2007-2009 Subaru Legacy 2.5i Limited 2007-2009 Subaru Legacy 2.5i Special Edition 2005-2006 Subaru Legacy GT 2005,2007-2009 Subaru Legacy GT Limited 2006-2009 Subaru Legacy GT spec.B 2005 Subaru Legacy i 2005 Subaru Legacy Limited 2006-2009 Subaru Outback 2.5i 2007 Subaru Outback 2.5i Basic 2008 Subaru Outback 2.5i L.L. Bean Edition 2006-2009 Subaru Outback 2.5i Limited 2008 Subaru Outback 2.5i Limited L.L. Bean Edition 2009 Subaru Outback 2.5i Special Edition 2008 Subaru Outback Base 2005 Subaru Outback i 2005 Subaru Outback Limited 2005-2006 Subaru Outback XT 2005-2009 Subaru Outback XT Limited 2015-2021 Subaru WRX Base 2015-2021 Subaru WRX Limited 2015-2021 Subaru WRX Premium 2015-2021 Subaru WRX STI Base 2015 Subaru WRX STI Launch Edition 2015-2021 Subaru WRX STI Limited 2019 Subaru WRX STI S209 2016 Subaru WRX STI Series.HyperBlue 2018 Subaru WRX STI Type RA

CSF has over 5 decades of experience manufacturing radiators. So when it comes to keeping your engine cool and your 370Z/G37 running at its best, a CSF High-Performance All-Aluminum Radiator is the obvious choice. Designed to perform on the street or at the track, a performance radiator is a must-have for both high horsepower builds as well as race vehicles which need added cooling performance in motorsports environments. The Triple-Pass Flow Structure allows the coolant to flow across the core of the radiator three times before exiting for lowest outlet temperatures possible. This radiator features a 2-Row core with CSF's exclusive B-Tube Technology: Unlike a regular oval shape "O" type radiator tube, CSF uses a specially engineered tube in the shape of a "B". These "B-tubes" are carefully formed and then brazed over the seam to seal. CSF is able to use thinner and lighter aluminum material (with better cooling efficiency) because this design is actually stronger than normal "O" shape tubes that are welded. The design (inlet in the middle of the tube that is seam brazed) increases the heat transfer surface area of the tubes by approximately 15% over regular tubes - producing the efficiency of two smaller tubes vs. one large tube within the same space criteria. With "B-tubes" you are able to get "dual liquid laminar flow". CSF also uses ultra efficient multi louvered fins that are carefully and precisely aligned to maximize airflow through each radiator core. Fin specifications are carefully measured and calculated for each application, and tested for maximum heat rejection efficiency in our wind-tunnel lab.This Part Fits: Year Make Model Submodel 2007-2008 INFINITI G35 Base 2007-2008 INFINITI G35 Journey 2007-2008 INFINITI G35 Sport 2007-2008 INFINITI G35 X 2008-2013 INFINITI G37 Base 2011-2013 INFINITI G37 IPL 2008-2013 INFINITI G37 Journey 2008-2013 INFINITI G37 Sport 2009-2013 INFINITI G37 X 2014-2015 INFINITI Q60 Base 2014-2015 INFINITI Q60 IPL 2014-2015 INFINITI Q60 Journey 2014-2015 INFINITI Q60 S 2015 INFINITI Q60 S Limited 2010 Nissan 370Z 40th Anniversary Edition 2009-2020 Nissan 370Z Base 2018-2019 Nissan 370Z Heritage Edition 2009-2017,2019-2020 Nissan 370Z Nismo 2015-2018 Nissan 370Z Nismo Tech 2015-2020 Nissan 370Z Sport 2015-2018 Nissan 370Z Sport Tech 2019-2020 Nissan 370Z Sport Touring 2009-2019 Nissan 370Z Touring 2015-2018 Nissan 370Z Touring Sport

CSF has over 5 decades of experience manufacturing radiators. So when it comes to keeping your engine cool and your CTS-V running at its best, a CSF High-Performance All-Aluminum Radiator is the obvious choice. Designed to perform on the street or at the track, a performance radiator is a must-have for both high horsepower builds as well as race vehicles which need added cooling performance in motorsports environments. This radiator features a 2-Row core with CSF's exclusive B-Tube Technology: Unlike a regular oval shape "O" type radiator tube, CSF uses a specially engineered tube in the shape of a "B". These "B-tubes" are carefully formed and then brazed over the seam to seal. CSF is able to use thinner and lighter aluminum material (with better cooling efficiency) because this design is actually stronger than normal "O" shape tubes that are welded. The design (inlet in the middle of the tube that is seam brazed) increases the heat transfer surface area of the tubes by approximately 15% over regular tubes - producing the efficiency of two smaller tubes vs. one large tube within the same space criteria. With "B-tubes" you are able to get "dual liquid laminar flow". CSF also uses ultra efficient multi louvered fins that are carefully and precisely aligned to maximize airflow through each radiator core. Fin specifications are carefully measured and calculated for each application, and tested for maximum heat rejection efficiency in our wind-tunnel lab.This Part Fits: Year Make Model Submodel 2009-2015 Cadillac CTS V

CSF has over 5 decades of experience manufacturing radiators. So when it comes to keeping your engine cool and your Camaro running at its best, a CSF High-Performance All-Aluminum Radiator is the obvious choice. Designed to perform on the street or at the track, a performance radiator is a must-have for both high horsepower builds as well as race vehicles which need added cooling performance in motorsports environments. This radiator features a 2-Row core with CSF's exclusive B-Tube Technology: Unlike a regular oval shape "O" type radiator tube, CSF uses a specially engineered tube in the shape of a "B". These "B-tubes" are carefully formed and then brazed over the seam to seal. CSF is able to use thinner and lighter aluminum material (with better cooling efficiency) because this design is actually stronger than normal "O" shape tubes that are welded. The design (inlet in the middle of the tube that is seam brazed) increases the heat transfer surface area of the tubes by approximately 15% over regular tubes - producing the efficiency of two smaller tubes vs. one large tube within the same space criteria. With "B-tubes" you are able to get "dual liquid laminar flow". CSF also uses ultra efficient multi louvered fins that are carefully and precisely aligned to maximize airflow through each radiator core. Fin specifications are carefully measured and calculated for each application, and tested for maximum heat rejection efficiency in our wind-tunnel lab.This Part Fits: Year Make Model Submodel 2010-2012 Chevrolet Camaro LS 2010-2012 Chevrolet Camaro LT 2010-2012 Chevrolet Camaro SS 2012 Chevrolet Camaro ZL1

CSF has over 5 decades of experience manufacturing radiators. So when it comes to keeping your engine cool and your 4Runner running at its best, a CSF Heavy-Duty/High-Performance All-Aluminum Radiator is the obvious choice. Designed to perform on and off road, a heavy-duty performance radiator is a must-have for off-roaders, overlanders, and adventurers. This radiator features a 2-Row core with CSF's exclusive B-Tube Technology: Unlike a regular oval shape "O" type radiator tube, CSF uses a specially engineered tube in the shape of a "B". These "B-tubes" are carefully formed and then brazed over the seam to seal. CSF is able to use thinner and lighter aluminum material (with better cooling efficiency) because this design is actually stronger than normal "O" shape tubes that are welded. The design (inlet in the middle of the tube that is seam brazed) increases the heat transfer surface area of the tubes by approximately 15% over regular tubes - producing the efficiency of two smaller tubes vs. one large tube within the same space criteria. With "B-tubes" you are able to get "dual liquid laminar flow". CSF also uses ultra efficient multi louvered fins that are carefully and precisely aligned to maximize airflow through each radiator core. Fin specifications are carefully measured and calculated for each application, and tested for maximum heat rejection efficiency in our wind-tunnel lab.This Part Fits: Year Make Model Submodel 2010-2022 Toyota 4Runner Limited 2020-2021 Toyota 4Runner Nightshade 2010-2022 Toyota 4Runner SR5 2018-2022 Toyota 4Runner SR5 Premium 2010-2016,2021-2022 Toyota 4Runner Trail 2017-2022 Toyota 4Runner TRD Off-Road 2018-2022 Toyota 4Runner TRD Off-Road Premium 2015-2022 Toyota 4Runner TRD Pro 2022 Toyota 4Runner TRD Sport 2020-2021 Toyota 4Runner Venture

CSF has over 5 decades of experience manufacturing radiators. So when it comes to keeping your engine cool and your Camaro running at its best, a CSF High-Performance All-Aluminum Radiator is the obvious choice. Designed to perform on the street or at the track, a performance radiator is a must-have for both high horsepower builds as well as race vehicles which need added cooling performance in motorsports environments. This radiator features a 2-Row core with CSF's exclusive B-Tube Technology: Unlike a regular oval shape "O" type radiator tube, CSF uses a specially engineered tube in the shape of a "B". These "B-tubes" are carefully formed and then brazed over the seam to seal. CSF is able to use thinner and lighter aluminum material (with better cooling efficiency) because this design is actually stronger than normal "O" shape tubes that are welded. The design (inlet in the middle of the tube that is seam brazed) increases the heat transfer surface area of the tubes by approximately 15% over regular tubes - producing the efficiency of two smaller tubes vs. one large tube within the same space criteria. With "B-tubes" you are able to get "dual liquid laminar flow". CSF also uses ultra efficient multi louvered fins that are carefully and precisely aligned to maximize airflow through each radiator core. Fin specifications are carefully measured and calculated for each application, and tested for maximum heat rejection efficiency in our wind-tunnel lab.This Part Fits: Year Make Model Submodel 2012-2015 Chevrolet Camaro LS 2012-2016 Chevrolet Camaro LT 2012-2016 Chevrolet Camaro SS 2014-2015 Chevrolet Camaro Z/28 2012-2015 Chevrolet Camaro ZL1

CSF Heavy Duty Intercoolers are the perfect upgrade for your 13-17 Ram 2500/3500 6.7L TD. The Heavy-Duty Bar & Plate Construction All-Aluminum Cast End Tanks have been Pressure Tested at 120 psi for Maximum Reliability in Extreme Boost Applications. This intercooler is a true "Drop-in Fit" installation with precise OEM-Style inlet/outlet connections and requires no modifications. In addition, each cooler comes finished in CSF's Thermal Rejection Powder-Coating for greater cooling performance and a sleek OEM+ look. Thermal Rejection coatings offer up to 15% improvement in heat dissipation over non coated intercoolers.This Part Fits: Year Make Model Submodel 2013-2018 Ram 2500 Big Horn 2013-2018 Ram 2500 Laramie 2014-2015 Ram 2500 Laramie Limited 2013-2018 Ram 2500 Laramie Longhorn 2016-2018 Ram 2500 Limited 2013-2015 Ram 2500 Lone Star 2013-2016 Ram 2500 Outdoorsman 2013-2018 Ram 2500 SLT 2013 Ram 2500 ST 2013-2018 Ram 2500 Tradesman 2013-2018 Ram 3500 Big Horn 2013-2018 Ram 3500 Laramie 2014-2015 Ram 3500 Laramie Limited 2013-2018 Ram 3500 Laramie Longhorn 2016-2018 Ram 3500 Limited 2013-2015,2017 Ram 3500 Lone Star 2013-2018 Ram 3500 SLT 2013 Ram 3500 ST 2013-2018 Ram 3500 Tradesman

CSF has over 5 decades of experience manufacturing radiators. So when it comes to keeping your engine cool and your N55 Powered BMW running at its best, a CSF High-Performance All-Aluminum Radiator is the obvious choice. Designed to perform on the street or at the track, a performance radiator is a must-have for both high horsepower builds as well as race vehicles which need added cooling performance in motorsports environments. This radiator features a 2-Row core with CSF's exclusive B-Tube Technology: Unlike a regular oval shape "O" type radiator tube, CSF uses a specially engineered tube in the shape of a "B". These "B-tubes" are carefully formed and then brazed over the seam to seal. CSF is able to use thinner and lighter aluminum material (with better cooling efficiency) because this design is actually stronger than normal "O" shape tubes that are welded. The design (inlet in the middle of the tube that is seam brazed) increases the heat transfer surface area of the tubes by approximately 15% over regular tubes - producing the efficiency of two smaller tubes vs. one large tube within the same space criteria. With "B-tubes" you are able to get "dual liquid laminar flow". CSF also uses ultra efficient multi louvered fins that are carefully and precisely aligned to maximize airflow through each radiator core. Fin specifications are carefully measured and calculated for each application, and tested for maximum heat rejection efficiency in our wind-tunnel lab.This Part Fits: Year Make Model Submodel 2011-2015 BMW 335i Base 2013-2015 BMW 335i xDrive Base 2014-2016 BMW 435i Base 2015-2016 BMW 435i Gran Coupe Base 2014-2016 BMW 435i xDrive Base 2015-2016 BMW 435i xDrive Gran Coupe Base 2016-2018 BMW M2 Base 2014-2016 BMW M235i Base 2015-2016 BMW M235i xDrive Base

The 42mm 2-Row aluminum core not only increases the fluid capacity of the radiator, but also improves the cores ability to dissipate heat. CSF's Exclusive B-Tube Technology improves heat transfer by approximately 15% over regular oval welded tubes. In addition, the super-efficient multi-louvered fins maximize airflow through the core for the best possible performance. Efficiency is key in off-roading as speeds tend to be lower overall so you end up relying on the fans to move most of the air over the radiator. While the factory fans do a decent job pulling air through the radiator core, it is still less airflow than you'd typically see in city driving. A larger and more efficient core will keep your engine temps in check and keep your engine running strong. Also, a larger core also helps when your radiator is covered in dust, dirt, or mud. While a radiator isn't functioning at peak efficiency in there situations, the more overall cooling capacity you have the better. In Addition, the end tanks are made from high grade aluminum and TIG welded to the core for extra strength. In contrast, the OEM crimped onto plastic end tank design is much weaker and creates a weak point where failure is more likely. Because the CSF radiator is designed as a true plug-and-play drop-in fit application, installation requires absolutely no modifications, trimming, or cutting.This Part Fits: Year Make Model Submodel 2015-2019 Subaru Legacy 2.5i 2015-2019 Subaru Legacy 2.5i Limited 2015-2019 Subaru Legacy 2.5i Premium 2017-2019 Subaru Legacy 2.5i Sport 2015-2019 Subaru Outback 2.5i 2015-2019 Subaru Outback 2.5i Limited 2015-2019 Subaru Outback 2.5i Premium 2017-2019 Subaru Outback 2.5i Touring

The High-Performance All-Aluminum Auxiliary Radiators work in conjunction with the rest of the cooling system to reduce temperatures throughout. This is critical as the Auxiliary Radiators not only help keep engine water temperatures lower, but also are utilized as the heat exchange medium in the air-to-water charge-air coolers for the turbocharger system to reduce intake air temperatures (IATs). Overall, the Auxiliary Radiators larger capacity prolongs the heat soak threshold and assists in keeping temperatures in optimal ranges. The included, detachable rock guard offers protection against the build-up of debris, as well as possible core punctures - unlike the OEM auxiliary radiators, which have little protection against the elements. CSF recommends purchasing two Auxiliary Radiators to replace both left and right OEM units (for vehicles with two from the factory). For maximum cooling performance, we advise installing in conjunction with the Front Mount Heat Exchanger (CSF #8188).This Part Fits: Year Make Model Submodel 2021 Mercedes-Benz AMG GT Black Series Base 2018-2021 Mercedes-Benz AMG GT C Base 2018-2020 Mercedes-Benz AMG GT R Base 2020 Mercedes-Benz AMG GT R Pro Base

The 42mm 2-Row aluminum core not only increases the fluid capacity of the radiator, but also improves the cores ability to dissipate heat. CSF's Exclusive B-Tube Technology improves heat transfer by approximately 15% over regular oval welded tubes. In addition, the super-efficient multi-louvered fins maximize airflow through the core for the best possible performance. Efficiency is key in off-roading as speeds tend to be lower overall so you end up relying on the fans to move most of the air over the radiator. While the factory fans do a decent job pulling air through the radiator core, it is still less airflow than you'd typically see in city driving. A larger and more efficient core will keep your engine temps in check and keep your engine running strong. Also, a larger core also helps when your radiator is covered in dust, dirt, or mud. While a radiator isn't functioning at peak efficiency in there situations, the more overall cooling capacity you have the better. In Addition, the end tanks are made from high grade aluminum and TIG welded to the core for extra strength. In contrast, the OEM crimped onto plastic end tank design is much weaker and creates a weak point where failure is more likely. Because the CSF radiator is designed as a true plug-and-play drop-in fit application, installation requires absolutely no modifications, trimming, or cutting.This Part Fits: Year Make Model Submodel 2018-2023 Subaru Crosstrek Base 2018-2023 Subaru Crosstrek Limited 2018-2023 Subaru Crosstrek Premium 2021-2023 Subaru Crosstrek Sport 2017-2022 Subaru Impreza Base 2017-2022 Subaru Impreza Limited 2017-2022 Subaru Impreza Premium 2017-2022 Subaru Impreza Sport

Bisimoto is no stranger to Hyundai tuning - back in 2019, Bisi approached CSF back in need of an upgraded intercooler for his factory-backed Veloster N SEMA project. Pushing the limits of the N platform, Bisi's car featured upgraded turbos and high-performance tuning, resulting in the OEM intercooler showing its weaknesses and inability to shed heat from the turbo system. With technology taken from CSF's #1 selling BMW N54/N55 intercooler, the front face of the intercooler features CSF's exclusive rounded bar/plate design, which aids the air entering the intercooler core by curving around the front bars rather than hitting and scattering on the surface of a traditional flat-bar faced intercooler. CSF's stepped-core design maximizes all of the available frontal area behind the front bumper and underneath the crash bar. The stepped-core protrudes upwards in front of the A.C. Condenser and sits just shy of the crash bar, for both the Veloster N and i30 N. Through prototype testing and data acquisition with Bisimoto, the decision was made to keep the OEM-sized inlet and outlet connections. This resulted in low pressure drop, even considering how much larger the CSF intercooler is - in addition, this feature removes the need to include costly and unnecessary silicone hoses, allowing CSF to offer the N community the best value, entering the market at the most aggressive price point.This Part Fits: Year Make Model Submodel 2019-2022 Hyundai Veloster N Base

CSF is the world leader in cooling technology. From its experience starting with the transmission in the BMW F8X M3, M4, and M2 Comp, CSF applied several different features exclusive to its manufacturing technologies. An innovative dual-core design allows for a 240% increase in core volume, resulting in maximum performance and maintaining optimal shifting during extreme racing conditions - from road racing to the drag strip. During R&D, CSF consulted with a network of partners, including leading time attack teams, tuners, and more. Often, the feedback was gearbox fatigue and sluggish shifting with transmission temperatures overheating under prolonged or hard use. CSF has the answer with our industry-leading transmission cooler for the A90/91 Supra and BMW G-Series. Installed in one of the world's fastest A90 Supra - Titan Motorsports Drag Race Supra (first Supra to reach 8s in the 1/4 mile).This Part Fits: Year Make Model Submodel 2018 BMW 330e Base 2023-2024 BMW M240i Base 2022-2024 BMW M240i xDrive Base 2020-2024 BMW M340i Base 2020-2024 BMW M340i xDrive Base 2021-2024 BMW M440i Base 2024 BMW M440i Gran Coupe Base 2021-2024 BMW M440i xDrive Base 2024 BMW M440i xDrive Gran Coupe Base 2022 BMW Z4 M40i 2020 BMW Z4 M40i First Edition 2020-2021 BMW Z4 sDrive M40i 2019 BMW Z4 sDrive30i 2024 Toyota GR Supra 45th Anniversary Edition 2021-2022 Toyota GR Supra A91 Edition 2023 Toyota GR Supra A91-MT Edition 2020-2024 Toyota GR Supra Base 2020 Toyota GR Supra Launch Edition 2020-2024 Toyota GR Supra Premium

The 2-Row 42mm aluminum core not only increases the fluid capacity of the radiator, but also improves the cores ability to dissipate heat. CSF's Exclusive B-Tube Technology increases the heat transfer by approximately 15% over regular oval welded tubes. In addition, the super-efficient multi-louvered fins maximize airflow through the core for the best possible performance. End tanks are made from high grade aluminum and TIG welded to the core for extra strength. In contrast, the OEM crimped onto plastic end tank design is much weaker and creates a weak point where failure is more likely. Because the CSF radiator is designed as a true plug-and-play drop-in fit application, installation requires absolutely no modifications, trimming, or cutting. CSF even includes pre-cut double sided adhesive foam strips to help seal the fan shroud against the radiator. This improves airflow efficiency off the fan. Additionally, the radiator features a built-in transmission oil cooler. The transmission cooler is a heavy-duty high-performance 5 plate design that connects to the OEM hoses. The upgraded built in cooler is great dealing with the added heat and stress from towing, low gear crawling, and vehicles equipped with oversized tires. While many understand the impacts of oversized tires, it is always good to provide extra incite. By increasing the diameter of your tires, you are reducing the effective gear ratio. This means the engine and transmission have to work harder to move the tires. Obviously this will end up generating excess heat, but the CSF radiator is designed to handle it.This Part Fits: Year Make Model Submodel 2010-2023 Lexus GX460 Base 2023 Lexus GX460 Black Line Edition 2014-2023 Lexus GX460 Luxury 2010-2023 Lexus GX460 Premium 2009 Lexus GX470 Base

CSF has over 5 decades of experience manufacturing radiators. So when it comes to keeping your engine cool and your 1M/135i/335i/Z4 running at its best, a CSF High-Performance All-Aluminum Radiator is the obvious choice. Designed to perform on the street or at the track, a performance radiator is a must-have for both high horsepower builds as well as race vehicles which need added cooling performance in motorsports environments. This radiator features a 2-Row core with CSF's exclusive B-Tube Technology: Unlike a regular oval shape "O" type radiator tube, CSF uses a specially engineered tube in the shape of a "B". These "B-tubes" are carefully formed and then brazed over the seam to seal. CSF is able to use thinner and lighter aluminum material (with better cooling efficiency) because this design is actually stronger than normal "O" shape tubes that are welded. The design (inlet in the middle of the tube that is seam brazed) increases the heat transfer surface area of the tubes by approximately 15% over regular tubes - producing the efficiency of two smaller tubes vs. one large tube within the same space criteria. With "B-tubes" you are able to get "dual liquid laminar flow". CSF also uses ultra efficient multi louvered fins that are carefully and precisely aligned to maximize airflow through each radiator core. Fin specifications are carefully measured and calculated for each application, and tested for maximum heat rejection efficiency in our wind-tunnel lab.This Part Fits: Year Make Model Submodel 2011 BMW 1 Series M Base 2008-2013 BMW 135i Base 2013 BMW 135is Base 2007-2013 BMW 335i Base 2013-2015 BMW X1 sDrive28i 2013-2015 BMW X1 xDrive28i 2012-2016 BMW Z4 sDrive28i 2009-2011 BMW Z4 sDrive30i 2009-2016 BMW Z4 sDrive35i 2011-2016 BMW Z4 sDrive35is

CSF has over 5 decades of experience manufacturing radiators. So when it comes to keeping your engine cool and your 1M/135i/335i running at its best, a CSF High-Performance All-Aluminum Radiator is the obvious choice. Designed to perform on the street or at the track, a performance radiator is a must-have for both high horsepower builds as well as race vehicles which need added cooling performance in motorsports environments. This radiator features a 2-Row core with CSF's exclusive B-Tube Technology: Unlike a regular oval shape "O" type radiator tube, CSF uses a specially engineered tube in the shape of a "B". These "B-tubes" are carefully formed and then brazed over the seam to seal. CSF is able to use thinner and lighter aluminum material (with better cooling efficiency) because this design is actually stronger than normal "O" shape tubes that are welded. The design (inlet in the middle of the tube that is seam brazed) increases the heat transfer surface area of the tubes by approximately 15% over regular tubes - producing the efficiency of two smaller tubes vs. one large tube within the same space criteria. With "B-tubes" you are able to get "dual liquid laminar flow". CSF also uses ultra efficient multi louvered fins that are carefully and precisely aligned to maximize airflow through each radiator core. Fin specifications are carefully measured and calculated for each application, and tested for maximum heat rejection efficiency in our wind-tunnel lab.This Part Fits: Year Make Model Submodel 2011 BMW 1 Series M Base 2008-2013 BMW 135i Base 2013 BMW 135is Base 2007-2013 BMW 335i Base 2012-2016 BMW Z4 sDrive28i 2009-2016 BMW Z4 sDrive35i

The S55 power BMW F8X suffers heavily from heat soak. While the ideal solution is pairing the Front Mount Heat Exchanger with the Charge-Air-Cooler, you can still see significant improvements with just the Heat Exchanger. The ability for the system to remove as much heat as possible is the bigger of the two weak points in the system. So if you are planning to upgrade your S55 cooling system and can only start with one, the Heat Exchanger is the right choice to start with. The CSF Heat Exchanger is a true "Drop-in Fit" Requiring No Modifications to Install. It accepts All attaching OEM components including "Quick-Connect" hoses, mounting brackets, OEM X-Brace and all air ducting/shrouding. The CSF #8075 comes in a Polished Finish. It is also available in a Satin Black Finish for OEM+ look (CSF #8075V).This Part Fits: Year Make Model Submodel 2014-2017,2019-2020 BMW i8 Base 2019-2021 BMW M2 Competition 2020 BMW M2 CS 2015-2018 BMW M3 Base 2015-2020 BMW M4 Base 2019-2020 BMW M4 CS 2016 BMW M4 GTS

The S55 power BMW F8X suffers heavily from heat soak. While the ideal solution is pairing the Front Mount Heat Exchanger with the Charge-Air-Cooler, you can still see significant improvements with just the Heat Exchanger. The ability for the system to remove as much heat as possible is the bigger of the two weak points in the system. So if you are planning to upgrade your S55 cooling system and can only start with one, the Heat Exchanger is the right choice to start with. The CSF Heat Exchanger is a true "Drop-in Fit" Requiring No Modifications to Install. It accepts All attaching OEM components including "Quick-Connect" hoses, mounting brackets, OEM X-Brace and all air ducting/shrouding. The CSF #8075V comes in a Satin Black Finish for OEM+ look. It is also available in a Polished Finish (CSF #8075).This Part Fits: Year Make Model Submodel 2014-2017,2019-2020 BMW i8 Base 2016-2018 BMW M2 Base 2019-2021 BMW M2 Competition 2020 BMW M2 CS 2015-2018 BMW M3 Base 2015-2020 BMW M4 Base 2019-2020 BMW M4 CS 2016 BMW M4 GTS