Close ×
Choose your Vehicle
Select your vehicle for a custom shopping experience
Spectre Breather Filter 10mm Flange / 2in. OD / 1-3/4in. Height - Black
$13.99
This Spectre breather filter, also known as a crankcase vent filter, has a flange with an inside diameter of 10mm. By using the included adjustable worm gear clamp, this air filter will fit tubes with outside diameters from 3/8 inch to 1/2 inch (8-12mm). Spectre breathers use pre-dyed synthetic media for lasting color, feature a triple chrome-plated steel top and base, and come factory pre-oiled and ready to use. Note: Legal in California only for racing vehicles which may never be used, registered, or licensed for use upon a highway. See spectreperformance.com for CARB status on each part for a specific vehicle.
Spectre Breather Filter 10mm Flange / 2in. OD / 1-3/4in. Height - Red
$13.99
This Spectre breather filter, also known as a crankcase vent filter, has a flange with an inside diameter of 10mm. By using the included adjustable worm gear clamp, this air filter will fit tubes with outside diameters from 3/8 inch to 1/2 inch (8-12mm). Spectre breathers use pre-dyed synthetic media for lasting color, feature a triple chrome-plated steel top and base, and come factory pre-oiled and ready to use. Note: Legal in California only for racing vehicles which may never be used, registered, or licensed for use upon a highway. See spectreperformance.com for CARB status on each part for a specific vehicle.
Spectre Carburetor Spacer - 1in. Open / 4-Port
$41.99
The Spectre Carburetor Spacer is a universal spacer/adapter that has been designed for Holley, Edelbrock or AFB carburetors. Manufactured using high quality materials, the outer plate precision die cast aluminum with heat insulating phenolic material. It is 1 inch thick and comes with an open spacer insert and a 4 hole spacer insert to allow you to the option that works best for you. This Spectre carburetor spacer is designed to increase power by raising air/fuel velocity as it enters the intake manifold. This adapter kit includes the needed gaskets and hardware for a fast and easy installation.
Spectre Chevrolet Distributor Hold Down - Chrome
$9.99
Spectre's Distributor Hold Downs offer high performance replacement hardware for your engine's distributor. Designed to fit the majority of Chevrolet V8 engines, this product is manufactured from high quality triple chrome-plated heavy gauge steel. This OEM replacement also includes a stud, nut and washer to ensure a secure fit and easy installation.
Spectre Conical Air Filter / Round Tapered 3in. - Red
$32.99
Spectre's clamp-on cone style air filter has a 3 inch inside diameter flange and measures 6 1/2 inches tall. This air filter is a great option for air intake setups that use a 3 inch diameter tube, adapter or throttle body. The air filter includes our red HPR washable air filter media and has been engineered to increase flow for greater performance over a typical paper air filter. This HPR air filter is factory pre-oiled and is ready to use. The air filter does not include a hose clamp, we recommend using part number 8704.
Spectre Conical Air Filter 3in. Flange ID / 6in. Base OD / 6.5in. Height - Black
$32.99
Spectre's Flat Top Cone Air Filter is manufactured using high quality materials including washable synthetic media, urethane, and steel mesh. This filter is engineered to increase air flow for greater performance, and comes factory pre-oiled and ready to use. Designed to fit 3 inch intake tube applications, this high performance air filter features black filter media and is also offered in red, blue, or white. Not included are the worm gear clamps used to secure the air filter, use part number 8704.
Spectre Coupler 3.5in. (PVC) - Black
$17.99
This Spectre Intake Coupler Reducer connects a 3-1/2 inch outside diameter component or air intake tube to another 3-1/2 inch outside diameter component or intake tube. This intake coupler is 2 inches in length and made from black PVC and comes complete with 2 stainless steel worm gear hose clamps. Not suitable to be installed on pressurized components such as turbocharger or supercharger outlets.
Spectre Coupler 3in. (PVC) - Black
$13.99
This Spectre Intake Coupler connects two 3 inch outside diameter components or air intake tubes together. This intake coupler is 2-1/4 inches in length and made from black PVC and comes complete with 2 stainless steel worm gear hose clamps. Not suitable to be installed on pressurized components such as turbocharger or supercharger outlets.
Spectre Coupler 3in. (PVC) - Blue
$13.99
This Spectre Intake Coupler connects two 3 inch outside diameter components or air intake tubes together. This intake coupler is 2-1/4 inches in length and made from blue PVC and comes complete with 2 stainless steel worm gear hose clamps. Not suitable to be installed on pressurized components such as turbocharger or supercharger outlets.
Spectre Coupler 4in. (PVC) - Black
$23.99
This Spectre Intake Coupler is designed to connect 4 inch outside diameter components or air intake tubes together. This intake coupler is 2 inches in length and made from black PVC and comes complete with 2 stainless steel worm gear hose clamps. Not suitable to be installed on pressurized components such as turbocharger or supercharger outlets.
Spectre Coupler 4in. Elbow / 90 Degree (PVC) - Black
$32.99
The Spectre Intake Coupler Elbow connects a 4 inch outside diameter component or air intake tube to another 4 inch outside diameter component or intake tube at a tight 90 degree angle. Two stainless steel worm gear hose clamps are included for installation. This coupler is not suitable to be installed on pressurized components such as turbocharger or supercharger outlets.
Spectre Coupler 4in. ID - Black
$19.99
Spectre's EPDM/TPE couplers, elbows and reducers are available to help you connect different air intake tubes together with ease. We offer multiple length and shape couplers and reducers with 3, 3.5, 4 and 4.5 inch inside diameter sizes. These couplers are also offered with additional angles to match the direction you want your intake to route. Our EPDM and TPE couplers and reducers are not recommended for turbo-charged and super-charged engines.
Spectre Coupler Elbow Reducer 3in. / 90 Degree w/2.5in. Insert (PVC) - Black
$24.99
This Spectre elbow coupler has a 90 degree bend and connects any 3 inch outside diameter component or air intake tube with another 3 inch or 2-1/2 inch outside diameter component or intake tube. The coupler is made from highly durable black PVC and comes with two stainless steel worm gear hose clamps and a 2-1/2 inch removable reducer to adapt one end to a 2-1/2 inch tube. This coupler is a great option where space is limited and an immediate bend will allow the use of an intake system. Not suitable to be installed on pressurized components such as turbocharger or supercharger outlets.
Spectre Coupler/Reducer 3.5in. to 3in. (PVC) - Black
$17.99
This Spectre Intake Coupler Reducer connects a 3-1/2 inch outside diameter component or air intake tube with a 3 inch outside diameter component or intake tube. This intake coupler is 3 inches in length and made from black PVC and comes complete with 2 stainless steel worm gear hose clamps. Not suitable to be installed on pressurized components such as turbocharger or supercharger outlets.
Spectre Coupler/Reducer 3in. to 2.5in. (PVC) - Black
$13.99
This Spectre Intake Coupler Reducer connects a 3 inch outside diameter component or air intake tube to a 2-1/2 inch outside diameter component or intake tube. This intake coupler is 3 inches in length and made from black PVC and comes complete with 2 stainless steel worm gear hose clamps. Not suitable to be installed on pressurized components such as turbocharger or supercharger outlets.
Spectre Coupler/Reducer 4in. to 3.5in. (PVC) - Black
$19.99
This Spectre Intake Coupler Reducer is designed to connect a 4 inch outside diameter component or air intake tube with a 3 1/2 inch outside diameter component or intake tube. This intake coupler is 3 inches in length and made from black PVC and comes complete with 2 stainless steel worm gear hose clamps. Not suitable to be installed on pressurized components such as turbocharger or supercharger outlets.
Spectre Coupler/Reducer 4in. to 3in. (PVC) - Black
$23.99
This Spectre Intake Coupler Reducer is designed to connect a 4 inch outside diameter component or air intake tube with a 3 inch outside diameter component or intake tube. This intake coupler is 3-1/2 inches in length and made from black PVC and comes complete with 2 stainless steel worm gear hose clamps. Not suitable to be installed on pressurized components such as turbocharger or supercharger outlets.
Spectre Differential Bolts (Chrome) - Set of 14
$12.99
Spectre's Differential Cover Bolt Set is engineered to provide premium quality hardware with a universal fit. Manufactured from high quality steel, these grade 5 bolts measure 5/16 inch-18 by 3/4 inch and feature a triple chrome-plated finish to ensure they look as well as they perform.
Spectre Dual Feed Fuel Line Holley 4150/4500
$63.99
The Spectre Dual Feed Fuel Line with red and blue fittings was designed to fit Holley 4150 and 4500 style carburetors, but is fully adjustable from 8 inches to 10 inches to fit the different model Holley carburetors including the Dominators. Featuring machine flared ends on 3/8 inch diameter fuel line with red/blue magna-clamps, this dual feed fuel line includes 0-15 PSI fuel pressure gauge and is triple chrome plated in #304 grade stainless steel. It's the ultimate in fit and function.
Spectre Exhaust Tip 3-1/2in. OD / Slant
$39.99
Spectre bolt-on universal exhaust tips are a great cosmetic add on for your exhaust system. Our universal exhaust tips feature a polished stainless steel finish for long lasting looks and a resonated interior for great sound. This exhaust tip is designed to fit 1.75 inch to 2.75 inch exhaust tubing and is held in place by the 3 mounting screws or can be tack welded. This exhaust tip also features an aggressive slant cut design with a 3.5 inch outside diameter body.
Spectre Exhaust Tip 3-1/2in. OD / Slant - Black
$49.99
Spectre bolt-on universal exhaust tips are a great cosmetic add on for your exhaust system. Our universal stainless steel exhaust tips feature a black textured powder coat finish for long lasting looks and a resonated interior for great sound. This exhaust tip is designed to fit 1.75 inch to 2.75 inch exhaust tubing and is held in place by the 3 mounting screws or can be tack welded. This exhaust tip also features an aggressive slant cut design with a 3.5 inch outside diameter body.
Spectre Exhaust Tip 4-1/2in. OD / Slant
$39.99
Spectre bolt-on universal exhaust tips are a great cosmetic add on for your exhaust system. Our universal exhaust tips feature a polished stainless steel finish for long lasting looks and a resonated interior for great sound. This exhaust tip is designed to fit 2.75 inch to 3.75 inch exhaust tubing and is held in place by the 3 mounting screws or can be tack welded. This exhaust tip also features an aggressive slant cut design with a 4.5 inch outside diameter body.
Spectre Exhaust Tip 4-1/2in. OD / Slant - Black
$77.99
Spectre bolt-on universal exhaust tips are a great cosmetic add on for your exhaust system. Our universal stainless steel exhaust tips feature a black textured powdercoat finish for long lasting looks. The interior is resonated to further enhance the exhaust note. This exhaust tip is designed to fit 2.75 inch to 3.75 inch exhaust tubing and is held in place by the 3 mounting screws or can be tack welded. This exhaust tip also features an aggressive slant cut design with a 4.5 inch outside diameter body.
Spectre ExtraFlow Filter Custom Assembly Value Pack 14in. x 3in. - Blue
$192.99
This Spectre HPR (High Performance Racing) Air Filter Top is designed to provide you with more horsepower and quicker acceleration by allowing more air flow into your engine. Use it with any 14 inch diameter air cleaner assembly. This is a premium show quality Air Filter Top from Speed By Spectre.
Spectre ExtraFlow Filter Value Pack 14in. x 3in. - Black
$181.99
This Spectre HPR (High Performance Racing) Air Filter Top is designed to provide you with more horsepower and quicker acceleration by allowing more air flow into your engine. Use it with any 14 inch diameter air cleaner assembly. This is a premium show quality Air Filter Top from Speed By Spectre.
Spectre ExtraFlow HPR Air Cleaner Assembly 14in. x 3in. - Red
$139.99
Spectre's 14 inch by 3 inch tall Extraflow air filter assembly is designed to fit throttle body injection assemblies and carburetors with a 5-1/8 inch neck flange. Featuring a zinc plated 1-1/4 inch drop base for increased hood clearance, this assembly requires 2.9 inches of clearance above the carb flange when installed. This assembly includes an ExtraFlow filter lid, which increases filter area and allows it to outperform standard closed lids. Available with Red synthetic media, our Extraflow assemblies are designed to provide greater performance than ordinary paper filters by increasing air flow into the engine.
Spectre ExtraFlow HPR Air Cleaner Assembly 14in. x 3in. - Red
$146.99
Spectre's 14 inch by 3 inch tall Extraflow air filter assembly is designed to fit throttle body injection assemblies and carburetors with a 5-1/8 inch neck flange. Featuring a zinc plated 1-1/4 inch drop base for increased hood clearance, this assembly requires 2.9 inches of clearance above the carb flange when installed. This assembly includes an ExtraFlow filter lid, which increases filter area and allows it to outperform standard closed lids. Available with Red synthetic media, our Extraflow assemblies are designed to provide greater performance than ordinary paper filters by increasing air flow into the engine.
Spectre ExtraFlow Push-In Breather Filter - Black
$32.99
Spectre's High Performance Push-In Breather was designed for valve covers with a 1-1/4 inch breather hole. With a triple chrome-plated steel top and base and an overall height of 2-3/4 inches, this breather features a 2 inch tall Extraflow filter element made from our black synthetic fiber filter media. Manufactured using high quality materials and designed for a universal fit, this high performance breather/vent air filter comes complete with a grommet for quick installation. Note: Legal in California only for racing vehicles which may never be used, registered, or licensed for use upon a highway. See spectreperformance.com for CARB status on each part for a specific vehicle.
Spectre ExtraFlow Push-In Breather Filter - Blue
$32.99
Spectre's High Performance Push-In Breather was designed for valve covers with a 1-1/4 inch breather hole. With a triple chrome-plated steel top and base and an overall height of 2-3/4 inches, this breather features a 2 inch tall Extraflow filter element made from our blue synthetic fiber filter media. Manufactured using high quality materials and designed for a universal fit. Note: Legal in California only for racing vehicles which may never be used, registered, or licensed for use upon a highway. See spectreperformance.com for CARB status on each part for a specific vehicle.
Spectre Fan Shroud 5in. - Chrome
$61.99
Spectre's Universal Radiator Fan Shrouds are made from triple chrome plated steel and are designed to allow the fan to efficiently pull air through the entire core of the radiator. Easy to install, the fan shroud is available in either a 3 inch or 5 1/2 inch wide by 20 inch diameter and includes the necessary hardware for easy installation.
Spectre Flex Coupler 4in. - Black
$46.99
Spectre's EPDM/TPE couplers, elbows and reducers are available to help you connect different air intake tubes together with ease. We offer multiple length and shape couplers and reducers with 3, 3.5, 4 and 4.5 inch inside diameter sizes. These couplers are also offered with additional angles to match the direction you want your intake to route. Our EPDM and TPE couplers and reducers are not recommended for turbo-charged and super-charged engines.
Spectre Flex Coupler Elbow 4in. ID / ID 90 Degree - Black
$62.99
Spectre's EPDM/TPE couplers, elbows and reducers are available to help you connect different air intake tubes together with ease. We offer multiple length and shape couplers and reducers with 3, 3.5, 4 and 4.5 inch inside diameter sizes. These couplers are also offered with additional angles to match the direction you want your intake to route. Our EPDM and TPE couplers and reducers are not recommended for turbo-charged and super-charged engines.
Spectre Ford/Chevy Flywheel Bolts
$7.99
Spectre's Flywheel Bolt and Lock Washer Set is engineered to provide premium quality hardware for many Chevy and Ford engines. Measuring 7/16 inch-20 by 1 inch, these grade 8 flywheel bolts are black oxide-plated for corrosion resistance and come with security lock washers.
Spectre Fuel Filter (Fits 5/16in. & 3/8in.) - Chrome
$10.99
Spectre's canister fuel filter is a universal in-line fuel filter designed to work with 5/16 and 3/8 inch fuel lines. This chrome plated fuel filter is designed for carbureted applications only and not for fuel injection applications.Installation Instructions
Spectre Fuel Fitting 3/8in. Hose Barb NPT Threads - Chrome
$10.99
The Spectre chrome hose fitting features a straight 3/8 inch NPT thread and a 3/8 inch outside diameter hose barb. This triple chrome plated straight fuel hose fitting is manufactured using high quality materials and is engineered for optimum fit and function.
Spectre GM LS3/LS7 Mass Air Flow Sensor Mount (Blade Style)
$21.99
Spectre's Mass Air Flow Sensor (MAFS) mount is designed to allow you to use a GM LS3/LS7 or Ford Coyote engine blade-style mass air flow sensor in your custom air intake system. It's designed to fit on a 3.5 inch or 4 inch tube. This MAF mounting pad is raw aluminum and it is designed to be welded onto the tube.