Fabtech's 8" 4 Link Conversion System for the Ford Super Duty is designed to provide maximum suspension performance for both on and offroad use. The system replaces the factory Radius Arm suspension with heavy duty 4 Link components for increased strength and functionality. The system will provide less caster change throughout the travel range which benefits on road driving. When offroad the 4 Link system will provide more articulation than a Radius Arm for increased terrain traversing at all speeds. Unique to this 8" system is Fabtech's extended length Track Bar to address the hyper sensitive steering box of the late model Super Duty. Fabtech is the only manufacturer with this exclusive system that offers proper steering performance. Fabtech's extended length Track Bar is 4" longer than stock and is offset to the driver side with a stout 1/4" thick steel mounting bracket. This design helps keep the Track Bar and Draglink closer to parallel than the factory angles to reduce push in the steering. The Track Bar allows for full lock steering of 15.50 wide tires w/ 4 3/4" BS wheels. Fabtech's 4 Link System has been proven in over 10 years of service in rugged commercial and military applications to ensure long life on your daily driven vehicle. High quality components with properly designed suspension geometry makes this Super Duty system the pinnacle of all suspensions. Comes with a free 5 year 60,000 mile powertrain warranty. For a complete understanding of this high quality system please see below features and benefits by component.This Part Fits: Year Make Model Submodel 2017-2020 Ford F-250 Super Duty King Ranch 2017-2020 Ford F-250 Super Duty Lariat 2018-2020 Ford F-250 Super Duty Limited 2017-2020 Ford F-250 Super Duty Platinum 2017-2020 Ford F-250 Super Duty XL 2017-2020 Ford F-250 Super Duty XLT 2017-2020 Ford F-350 Super Duty King Ranch 2017-2020 Ford F-350 Super Duty Lariat 2018-2020 Ford F-350 Super Duty Limited 2017-2020 Ford F-350 Super Duty Platinum 2017-2020 Ford F-350 Super Duty XL 2017-2020 Ford F-350 Super Duty XLT

Fabtech?s 8? Radius Arm system for the Ford Super Duty is built to handle the on and offroad demands of the truck enthusiast. This Radius Arm system is a heavy duty upgrade to the factory suspension and will provide additional strength to the vehicle. The heart of this quality system is Fabtech?s legendary tubular Radius Arms. The design of these arms comes from Fabtech?s racing experience and are built with a tubular structure reinforced by dimple die side plates and heavy gusseting for rugged offroad use. They are superior in strength to the stock stamped arms. Unique to this 8? system is Fabtech?s extended length Track Bar to address the hyper sensitive steering box of the late model Super Duty. Fabtech is the only manufacturer with this ground breaking system that offers proper steering performance. Fabtech?s extended length Track Bar is 4? longer than stock and is offset to the driver side with a stout 1/4? thick steel mounting bracket. This design helps keep the Track Bar and Draglink closer to parallel than the factory angles to reduce push in the steering. The Track Bar allows for full lock steering of 15.50 wide tires w/ 4 3/4? BS wheels. Included in this system is the massive Dirt Logic 4.0 Resi Coilover Conversion for outstanding damping capacity offroad with a quality on road ride. The Coilover bolts in place of the factory coil spring without removal of the coil spring bucket. The giant 4? diameter aluminum remote reservoir mounts horizontally above the Coilover to allow for full compression travel with oversized tires. The Dirt Logic 4.0 Resi Coilover is the biggest and baddest on the market for the Ford Super Duty. This high quality 8? System provides increased strength and performance for the demanding Super Duty enthusiast. System includes a free 5 year 60,000 mile powertrain warranty. Each Fabtech component has been designed with specific features and benefits that create this quality suspension system.This Part Fits: Year Make Model Submodel 2017-2020 Ford F-250 Super Duty King Ranch 2017-2020 Ford F-250 Super Duty Lariat 2018-2020 Ford F-250 Super Duty Limited 2017-2020 Ford F-250 Super Duty Platinum 2017-2020 Ford F-250 Super Duty XL 2017-2020 Ford F-250 Super Duty XLT 2017-2020 Ford F-350 Super Duty King Ranch 2017-2020 Ford F-350 Super Duty Lariat 2018-2020 Ford F-350 Super Duty Limited 2017-2020 Ford F-350 Super Duty Platinum 2017-2020 Ford F-350 Super Duty XL 2017-2020 Ford F-350 Super Duty XLT

Fabtech?s 8" Radius Arm system for the Ford Super Duty is built to handle the on and offroad demands of the truck enthusiast. This Radius Arm system is a heavy duty upgrade to the factory suspension and will provide additional strength to the vehicle. The heart of this quality system is Fabtech?s legendary tubular Radius Arms. The design of these arms comes from Fabtech?s racing experience and are built with a tubular structure reinforced by dimple die side plates and heavy gusseting for rugged offroad use. They are superior in strength to the stock stamped arms. Unique to this 8" system is Fabtech?s extended length Track Bar to address the hyper sensitive steering box of the late model Super Duty. Fabtech is the only manufacturer with this ground breaking system that offers proper steering performance. Fabtech?s extended length Track Bar is 4" longer than stock and is offset to the driver side with a stout 1/4" thick steel mounting bracket. This design helps keep the Track Bar and Draglink closer to parallel than the factory angles to reduce push in the steering. The Track Bar allows for full lock steering of 15.50 wide tires w/ 4 3/4" BS wheels. This high quality 8" System provides increased strength and performance for the demanding Super Duty enthusiast. System includes a free 5 year 60,000 mile powertrain warranty. Each Fabtech component has been designed with specific features and benefits that create this quality suspension system.This Part Fits: Year Make Model Submodel 2017-2020 Ford F-250 Super Duty King Ranch 2017-2020 Ford F-250 Super Duty Lariat 2018-2020 Ford F-250 Super Duty Limited 2017-2020 Ford F-250 Super Duty Platinum 2017-2020 Ford F-250 Super Duty XL 2017-2020 Ford F-250 Super Duty XLT 2017-2020 Ford F-350 Super Duty King Ranch 2017-2020 Ford F-350 Super Duty Lariat 2018-2020 Ford F-350 Super Duty Limited 2017-2020 Ford F-350 Super Duty Platinum 2017-2020 Ford F-350 Super Duty XL 2017-2020 Ford F-350 Super Duty XLT

Fabtech?s 8? Super Duty suspension systems incorporate their proven Radius Arm and 4 Link designs with an all new offset Track Bar system specifically for the late model Super Duty platform. This innovative Track Bar system addresses the hyper sensitive steering box of the Ford Super Duty when increasing the ride height to 8? and running oversized tires. Fabtech is the only manufacturer with this ground breaking system that offers proper steering performance. Fabtech?s extended length Track Bar is 4? longer than stock and is offset to the driver side with a stout 1/4? thick steel mounting bracket. This design helps keep the Track Bar and Draglink closer to parallel than the factory angle to reduce push in the steering. The Track Bar allows for full lock steering of 15.50 wide tires w/ 5? BS wheels. The 8? System is available with heavy duty tubular Radius Arms or 4 Link Conversion System for outstanding on and offroad performance. Front spring options include performance Coil Springs or the Dirt Logic 4.0 Coilover Conversion system for maximum damping capacity. Dirt Logic 2.25 Stainless Steel shocks are included with these systems for a superior ride quality. These high end 8? Systems are the pinnacle of quality and ride performance for the 2017 Super Duty. Each system is a bolt on installation and comes with Fabtech?s 5 year 60,000 mile warranty.This Part Fits: Year Make Model Submodel 2017-2020 Ford F-250 Super Duty King Ranch 2017-2020 Ford F-250 Super Duty Lariat 2018-2020 Ford F-250 Super Duty Limited 2017-2020 Ford F-250 Super Duty Platinum 2017-2020 Ford F-250 Super Duty XL 2017-2020 Ford F-250 Super Duty XLT 2017-2020 Ford F-350 Super Duty King Ranch 2017-2020 Ford F-350 Super Duty Lariat 2018-2020 Ford F-350 Super Duty Limited 2017-2020 Ford F-350 Super Duty Platinum 2017-2020 Ford F-350 Super Duty XL 2017-2020 Ford F-350 Super Duty XLT

At the top of our Super Duty line is our famous bolt-on 4 Link System that provides unsurpassed articulation and wheel travel. These 2in diameter heavy wall links feature race style 1in Uniballs for superior strength. Thick 1/4in steel brackets secure the 4 Links to the frame without cutting or welding. This 4 Link system is comes complete with our replacement Coil Springs, Sway Bar drops, Pitman Arm, and a rear Block & U-Bolt kit.This Part Fits: Year Make Model Submodel 2017,2020 Ford F-250 Super Duty King Ranch 2017,2020 Ford F-250 Super Duty Lariat 2017,2020 Ford F-250 Super Duty Platinum 2017,2020 Ford F-250 Super Duty XL 2017,2020 Ford F-250 Super Duty XLT 2017,2020 Ford F-350 Super Duty King Ranch 2017,2020 Ford F-350 Super Duty Lariat 2017,2020 Ford F-350 Super Duty Platinum 2017,2020 Ford F-350 Super Duty XL 2017,2020 Ford F-350 Super Duty XLT

At the top of our Super Duty line is our famous bolt-on 4 Link System that provides unsurpassed articulation and wheel travel. These 2in diameter heavy wall links feature race style 1in Uniballs for superior strength. Thick 1/4in steel brackets secure the 4 Links to the frame without cutting or welding. This 4 Link system is comes complete with our replacement Coil Springs, Sway Bar drops, Pitman Arm, and a rear Block & U-Bolt kit.This Part Fits: Year Make Model Submodel 2017,2020 Ford F-250 Super Duty King Ranch 2017,2020 Ford F-250 Super Duty Lariat 2017,2020 Ford F-250 Super Duty Platinum 2017,2020 Ford F-250 Super Duty XL 2017,2020 Ford F-250 Super Duty XLT 2017,2020 Ford F-350 Super Duty King Ranch 2017,2020 Ford F-350 Super Duty Lariat 2017,2020 Ford F-350 Super Duty Platinum 2017,2020 Ford F-350 Super Duty XL 2017,2020 Ford F-350 Super Duty XLT

At the top of our Super Duty line is our famous bolt-on 4 Link System that provides unsurpassed articulation and wheel travel. These 2in diameter heavy wall links feature race style 1in Uniballs for superior strength. Thick 1/4in steel brackets secure the 4 Links to the frame without cutting or welding. This 4 Link system is comes complete with our replacement Coil Springs, Sway Bar drops, Pitman Arm, and a rear Block & U-Bolt kit.This Part Fits: Year Make Model Submodel 2017,2020 Ford F-250 Super Duty King Ranch 2017,2020 Ford F-250 Super Duty Lariat 2017,2020 Ford F-250 Super Duty Platinum 2017,2020 Ford F-250 Super Duty XL 2017,2020 Ford F-250 Super Duty XLT 2017,2020 Ford F-350 Super Duty King Ranch 2017,2020 Ford F-350 Super Duty Lariat 2017,2020 Ford F-350 Super Duty Platinum 2017,2020 Ford F-350 Super Duty XL 2017,2020 Ford F-350 Super Duty XLT

TIRE SIZE - 35/12.50R17 WHEEL - 17X9 W/4 3/4" BS W/MINOR TRIMMING; TIRE SIZE - 35/12.50R18 WHEEL - 18X9.5 W/4 3/4" BS W/MINOR TRIMMING; TIRE SIZE - 35/12.50R20 WHEEL - 20X9 W/5" BS W/MINOR TRIMMING; 3. NON DUALLY MODELS ONLY.; 165. SOME 2017 MODELS MAY REQUIRE A DUAL STEERING STABILIZER FOR OVERSIZED TIRES. ORDER DIRT LOGIC-FTS220512, DIRT LOGIC W/RESI-FTS221162 OR STEALTH-FTS8046.; 171. WILL NOT FIT DIESEL MODELSThis Part Fits: Year Make Model Submodel 2017,2020 Ford F-250 Super Duty King Ranch 2017,2020 Ford F-250 Super Duty Lariat 2017,2020 Ford F-250 Super Duty Platinum 2017,2020 Ford F-250 Super Duty XL 2017,2020 Ford F-250 Super Duty XLT 2017,2020 Ford F-350 Super Duty King Ranch 2017,2020 Ford F-350 Super Duty Lariat 2017,2020 Ford F-350 Super Duty Platinum 2017,2020 Ford F-350 Super Duty XL 2017,2020 Ford F-350 Super Duty XLT

TIRE SIZE - 35/12.50R17 WHEEL - 17X9 W/4 3/4" BS W/MINOR TRIMMING; TIRE SIZE - 35/12.50R18 WHEEL - 18X9.5 W/4 3/4" BS W/MINOR TRIMMING; TIRE SIZE - 35/12.50R20 WHEEL - 20X9 W/5" BS W/MINOR TRIMMING; 3. NON DUALLY MODELS ONLY.; 165. SOME 2017 MODELS MAY REQUIRE A DUAL STEERING STABILIZER FOR OVERSIZED TIRES. ORDER DIRT LOGIC-FTS220512, DIRT LOGIC W/RESI-FTS221162 OR STEALTH-FTS8046.; 171. WILL NOT FIT DIESEL MODELSThis Part Fits: Year Make Model Submodel 2017,2020 Ford F-250 Super Duty King Ranch 2017,2020 Ford F-250 Super Duty Lariat 2017,2020 Ford F-250 Super Duty Platinum 2017,2020 Ford F-250 Super Duty XL 2017,2020 Ford F-250 Super Duty XLT 2017,2020 Ford F-350 Super Duty King Ranch 2017,2020 Ford F-350 Super Duty Lariat 2017,2020 Ford F-350 Super Duty Platinum 2017,2020 Ford F-350 Super Duty XL 2017,2020 Ford F-350 Super Duty XLT

TIRE SIZE - 35/12.50R17 WHEEL - 17X9 W/4 3/4" BS W/MINOR TRIMMING; TIRE SIZE - 35/12.50R18 WHEEL - 18X9.5 W/4 3/4" BS W/MINOR TRIMMING; TIRE SIZE - 35/12.50R20 WHEEL - 20X9 W/5" BS W/MINOR TRIMMING; 3. NON DUALLY MODELS ONLY.; 165. SOME 2017 MODELS MAY REQUIRE A DUAL STEERING STABILIZER FOR OVERSIZED TIRES. ORDER DIRT LOGIC-FTS220512, DIRT LOGIC W/RESI-FTS221162 OR STEALTH-FTS8046.; 171. WILL NOT FIT DIESEL MODELSThis Part Fits: Year Make Model Submodel 2017,2020 Ford F-250 Super Duty King Ranch 2017,2020 Ford F-250 Super Duty Lariat 2017,2020 Ford F-250 Super Duty Platinum 2017,2020 Ford F-250 Super Duty XL 2017,2020 Ford F-250 Super Duty XLT 2017,2020 Ford F-350 Super Duty King Ranch 2017,2020 Ford F-350 Super Duty Lariat 2017,2020 Ford F-350 Super Duty Platinum 2017,2020 Ford F-350 Super Duty XL 2017,2020 Ford F-350 Super Duty XLT

Fabtechs development capabilities are second to none with over 20 years of experience in aftermarket suspension design. State of the art software, fabrication equipment along with our seasoned engineers and fabricators allow the company to develop products that are constantly on the cutting edge. Fabtech has received numerous awards for our designs that continue to lead the market. Proper design in suspension development is key in providing a quality, trouble free product to the end consumer. Fabtech leads the industry with extensive research, design technology and rigorous testing that results in the highest performing, finest quality suspension system for the discerning offroad enthusiast.This Part Fits: Year Make Model Submodel 2017,2020 Ford F-250 Super Duty King Ranch 2017,2020 Ford F-250 Super Duty Lariat 2017,2020 Ford F-250 Super Duty Platinum 2017,2020 Ford F-250 Super Duty XL 2017,2020 Ford F-250 Super Duty XLT 2017,2020 Ford F-350 Super Duty King Ranch 2017,2020 Ford F-350 Super Duty Lariat 2017,2020 Ford F-350 Super Duty Platinum 2017,2020 Ford F-350 Super Duty XL 2017,2020 Ford F-350 Super Duty XLT

Fabtechs development capabilities are second to none with over 20 years of experience in aftermarket suspension design. State of the art software, fabrication equipment along with our seasoned engineers and fabricators allow the company to develop products that are constantly on the cutting edge. Fabtech has received numerous awards for our designs that continue to lead the market. Proper design in suspension development is key in providing a quality, trouble free product to the end consumer. Fabtech leads the industry with extensive research, design technology and rigorous testing that results in the highest performing, finest quality suspension system for the discerning offroad enthusiast.This Part Fits: Year Make Model Submodel 2017,2020 Ford F-250 Super Duty King Ranch 2017,2020 Ford F-250 Super Duty Lariat 2017,2020 Ford F-250 Super Duty Platinum 2017,2020 Ford F-250 Super Duty XL 2017,2020 Ford F-250 Super Duty XLT 2017,2020 Ford F-350 Super Duty King Ranch 2017,2020 Ford F-350 Super Duty Lariat 2017,2020 Ford F-350 Super Duty Platinum 2017,2020 Ford F-350 Super Duty XL 2017,2020 Ford F-350 Super Duty XLT

Fabtechs development capabilities are second to none with over 20 years of experience in aftermarket suspension design. State of the art software, fabrication equipment along with our seasoned engineers and fabricators allow the company to develop products that are constantly on the cutting edge. Fabtech has received numerous awards for our designs that continue to lead the market. Proper design in suspension development is key in providing a quality, trouble free product to the end consumer. Fabtech leads the industry with extensive research, design technology and rigorous testing that results in the highest performing, finest quality suspension system for the discerning offroad enthusiast.This Part Fits: Year Make Model Submodel 2017,2020 Ford F-250 Super Duty King Ranch 2017,2020 Ford F-250 Super Duty Lariat 2017,2020 Ford F-250 Super Duty Platinum 2017,2020 Ford F-250 Super Duty XL 2017,2020 Ford F-250 Super Duty XLT 2017,2020 Ford F-350 Super Duty King Ranch 2017,2020 Ford F-350 Super Duty Lariat 2017,2020 Ford F-350 Super Duty Platinum 2017,2020 Ford F-350 Super Duty XL 2017,2020 Ford F-350 Super Duty XLT

For the ultimate in suspension performance for the Super Duty we offer a bolt on 4 Link System that provides unsurpassed articulation and wheel travel. These 2" diameter heavy wall links feature race style 1" Uniballs for superior strength. Thick 1/4" steel brackets secure the 4 Links to the frame without cutting or welding. This 4 Link system allows the use of our replacement Coil Springs. The system also includes Sway bar drops, Trac Bar relocation bracket, Pitman Arm, and a rear Block & U-Bolt kit. Includes Dirt Logic 2.25 Shocks. This system qualifies for our 5/60 Powertrain Warranty.This Part Fits: Year Make Model Submodel 2017,2020 Ford F-250 Super Duty King Ranch 2017,2020 Ford F-250 Super Duty Lariat 2017,2020 Ford F-250 Super Duty Platinum 2017,2020 Ford F-250 Super Duty XL 2017,2020 Ford F-250 Super Duty XLT 2017,2020 Ford F-350 Super Duty King Ranch 2017,2020 Ford F-350 Super Duty Lariat 2017,2020 Ford F-350 Super Duty Platinum 2017,2020 Ford F-350 Super Duty XL 2017,2020 Ford F-350 Super Duty XLT

For the ultimate in suspension performance for the Super Duty we offer a bolt on 4 Link System that provides unsurpassed articulation and wheel travel. These 2" diameter heavy wall links feature race style 1" Uniballs for superior strength. Thick 1/4" steel brackets secure the 4 Links to the frame without cutting or welding. This 4 Link system allows the use of our replacement Coil Springs. The system also includes Sway bar drops, Trac Bar relocation bracket, Pitman Arm, and a rear Block & U-Bolt kit. Includes Performance Shocks. This system qualifies for our 5/60 Powertrain Warranty.This Part Fits: Year Make Model Submodel 2017,2020 Ford F-250 Super Duty King Ranch 2017,2020 Ford F-250 Super Duty Lariat 2017,2020 Ford F-250 Super Duty Platinum 2017,2020 Ford F-250 Super Duty XL 2017,2020 Ford F-250 Super Duty XLT 2017,2020 Ford F-350 Super Duty King Ranch 2017,2020 Ford F-350 Super Duty Lariat 2017,2020 Ford F-350 Super Duty Platinum 2017,2020 Ford F-350 Super Duty XL 2017,2020 Ford F-350 Super Duty XLT

For the ultimate in suspension performance for the Super Duty we offer a bolt on 4 Link System that provides unsurpassed articulation and wheel travel. These 2" diameter heavy wall links feature race style 1" Uniballs for superior strength. Thick 1/4" steel brackets secure the 4 Links to the frame without cutting or welding. This 4 Link system allows the use of our replacement Coil Springs. The system also includes Sway bar drops, Trac Bar relocation bracket, Pitman Arm, and a rear Block & U-Bolt kit. Includes Stealth Shocks. This system qualifies for our 5/60 Powertrain Warranty.This Part Fits: Year Make Model Submodel 2017,2020 Ford F-250 Super Duty King Ranch 2017,2020 Ford F-250 Super Duty Lariat 2017,2020 Ford F-250 Super Duty Platinum 2017,2020 Ford F-250 Super Duty XL 2017,2020 Ford F-250 Super Duty XLT 2017,2020 Ford F-350 Super Duty King Ranch 2017,2020 Ford F-350 Super Duty Lariat 2017,2020 Ford F-350 Super Duty Platinum 2017,2020 Ford F-350 Super Duty XL 2017,2020 Ford F-350 Super Duty XLT

TIRE SIZE - 37/12.50R17 WHEEL - 17X9 W/4 3/4" BS W/MINOR TRIMMING; TIRE SIZE - 37/12.50R18 WHEEL - 18X9 W/4 3/4" BS W/MINOR TRIMMING; TIRE SIZE - 37/13.50R20 WHEEL - 20X9 W/5" BS W/MINOR TRIMMING; 3. NON DUALLY MODELS ONLY.; 163. VEHICLES EQUIPPED WITH 2 PIECE DRIVESHAFT REQUIRE FTS419.; 171. WILL NOT FIT DIESEL MODELS; 173. FRONT DRIVESHAFT MODIFICATION IS REQUIRED OR ORDER DRIVESHAFT (FTS92036); 175. VEHICLES W/ FACTORY REAR SWAY BAR MUST ORDER EXTENDED SWAY BAR LINK KIT PART NUMBER FTS22276.This Part Fits: Year Make Model Submodel 2017,2020 Ford F-250 Super Duty King Ranch 2017,2020 Ford F-250 Super Duty Lariat 2017,2020 Ford F-250 Super Duty Platinum 2017,2020 Ford F-250 Super Duty XL 2017,2020 Ford F-250 Super Duty XLT 2017,2020 Ford F-350 Super Duty King Ranch 2017,2020 Ford F-350 Super Duty Lariat 2017,2020 Ford F-350 Super Duty Platinum 2017,2020 Ford F-350 Super Duty XL 2017,2020 Ford F-350 Super Duty XLT

TIRE SIZE - 37/12.50R17 WHEEL - 17X9 W/4 3/4" BS W/MINOR TRIMMING; TIRE SIZE - 37/12.50R18 WHEEL - 18X9 W/4 3/4" BS W/MINOR TRIMMING; TIRE SIZE - 37/13.50R20 WHEEL - 20X9 W/5" BS W/MINOR TRIMMING; 3. NON DUALLY MODELS ONLY.; 163. VEHICLES EQUIPPED WITH 2 PIECE DRIVESHAFT REQUIRE FTS419.; 171. WILL NOT FIT DIESEL MODELS; 173. FRONT DRIVESHAFT MODIFICATION IS REQUIRED OR ORDER DRIVESHAFT (FTS92036); 175. VEHICLES W/ FACTORY REAR SWAY BAR MUST ORDER EXTENDED SWAY BAR LINK KIT PART NUMBER FTS22276.This Part Fits: Year Make Model Submodel 2017,2020 Ford F-250 Super Duty King Ranch 2017,2020 Ford F-250 Super Duty Lariat 2017,2020 Ford F-250 Super Duty Platinum 2017,2020 Ford F-250 Super Duty XL 2017,2020 Ford F-250 Super Duty XLT 2017,2020 Ford F-350 Super Duty King Ranch 2017,2020 Ford F-350 Super Duty Lariat 2017,2020 Ford F-350 Super Duty Platinum 2017,2020 Ford F-350 Super Duty XL 2017,2020 Ford F-350 Super Duty XLT

TIRE SIZE - 37/12.50R17 WHEEL - 17X9 W/4 3/4" BS W/MINOR TRIMMING; TIRE SIZE - 37/12.50R18 WHEEL - 18X9 W/4 3/4" BS W/MINOR TRIMMING; TIRE SIZE - 37/13.50R20 WHEEL - 20X9 W/5" BS W/MINOR TRIMMING; 3. NON DUALLY MODELS ONLY.; 163. VEHICLES EQUIPPED WITH 2 PIECE DRIVESHAFT REQUIRE FTS419.; 171. WILL NOT FIT DIESEL MODELS; 173. FRONT DRIVESHAFT MODIFICATION IS REQUIRED OR ORDER DRIVESHAFT (FTS92036); 175. VEHICLES W/ FACTORY REAR SWAY BAR MUST ORDER EXTENDED SWAY BAR LINK KIT PART NUMBER FTS22276.This Part Fits: Year Make Model Submodel 2017,2020 Ford F-250 Super Duty King Ranch 2017,2020 Ford F-250 Super Duty Lariat 2017,2020 Ford F-250 Super Duty Platinum 2017,2020 Ford F-250 Super Duty XL 2017,2020 Ford F-250 Super Duty XLT 2017,2020 Ford F-350 Super Duty King Ranch 2017,2020 Ford F-350 Super Duty Lariat 2017,2020 Ford F-350 Super Duty Platinum 2017,2020 Ford F-350 Super Duty XL 2017,2020 Ford F-350 Super Duty XLT

TIRE SIZE - 37/12.50R17 WHEEL - 17X9 W/4 3/4" BS W/MINOR TRIMMING; TIRE SIZE - 37/12.50R18 WHEEL - 18X9 W/4 3/4" BS W/MINOR TRIMMING; TIRE SIZE - 37/13.50R20 WHEEL - 20X9 W/5" BS W/MINOR TRIMMING; 3. NON DUALLY MODELS ONLY.; 163. VEHICLES EQUIPPED WITH 2 PIECE DRIVESHAFT REQUIRE FTS419.; 171. WILL NOT FIT DIESEL MODELS; 173. FRONT DRIVESHAFT MODIFICATION IS REQUIRED OR ORDER DRIVESHAFT (FTS92036); 175. VEHICLES W/ FACTORY REAR SWAY BAR MUST ORDER EXTENDED SWAY BAR LINK KIT PART NUMBER FTS22276.This Part Fits: Year Make Model Submodel 2017,2020 Ford F-250 Super Duty King Ranch 2017,2020 Ford F-250 Super Duty Lariat 2017,2020 Ford F-250 Super Duty Platinum 2017,2020 Ford F-250 Super Duty XL 2017,2020 Ford F-250 Super Duty XLT 2017,2020 Ford F-350 Super Duty King Ranch 2017,2020 Ford F-350 Super Duty Lariat 2017,2020 Ford F-350 Super Duty Platinum 2017,2020 Ford F-350 Super Duty XL 2017,2020 Ford F-350 Super Duty XLT

TIRE SIZE - 37/12.50R17 WHEEL - 17X9 W/4 3/4" BS W/MINOR TRIMMING; TIRE SIZE - 37/12.50R18 WHEEL - 18X9 W/4 3/4" BS W/MINOR TRIMMING; TIRE SIZE - 37/13.50R20 WHEEL - 20X9 W/5" BS W/MINOR TRIMMING; 3. NON DUALLY MODELS ONLY.; 163. VEHICLES EQUIPPED WITH 2 PIECE DRIVESHAFT REQUIRE FTS419.; 171. WILL NOT FIT DIESEL MODELS; 173. FRONT DRIVESHAFT MODIFICATION IS REQUIRED OR ORDER DRIVESHAFT (FTS92036); 175. VEHICLES W/ FACTORY REAR SWAY BAR MUST ORDER EXTENDED SWAY BAR LINK KIT PART NUMBER FTS22276.This Part Fits: Year Make Model Submodel 2017,2020 Ford F-250 Super Duty King Ranch 2017,2020 Ford F-250 Super Duty Lariat 2017,2020 Ford F-250 Super Duty Platinum 2017,2020 Ford F-250 Super Duty XL 2017,2020 Ford F-250 Super Duty XLT 2017,2020 Ford F-350 Super Duty King Ranch 2017,2020 Ford F-350 Super Duty Lariat 2017,2020 Ford F-350 Super Duty Platinum 2017,2020 Ford F-350 Super Duty XL 2017,2020 Ford F-350 Super Duty XLT

TIRE SIZE - 37/12.50R17 WHEEL - 17X9 W/4 3/4" BS W/MINOR TRIMMING; TIRE SIZE - 37/12.50R18 WHEEL - 18X9 W/4 3/4" BS W/MINOR TRIMMING; TIRE SIZE - 37/13.50R20 WHEEL - 20X9 W/5" BS W/MINOR TRIMMING; 3. NON DUALLY MODELS ONLY.; 163. VEHICLES EQUIPPED WITH 2 PIECE DRIVESHAFT REQUIRE FTS419.; 171. WILL NOT FIT DIESEL MODELS; 173. FRONT DRIVESHAFT MODIFICATION IS REQUIRED OR ORDER DRIVESHAFT (FTS92036); 175. VEHICLES W/ FACTORY REAR SWAY BAR MUST ORDER EXTENDED SWAY BAR LINK KIT PART NUMBER FTS22276.This Part Fits: Year Make Model Submodel 2017,2020 Ford F-250 Super Duty King Ranch 2017,2020 Ford F-250 Super Duty Lariat 2017,2020 Ford F-250 Super Duty Platinum 2017,2020 Ford F-250 Super Duty XL 2017,2020 Ford F-250 Super Duty XLT 2017,2020 Ford F-350 Super Duty King Ranch 2017,2020 Ford F-350 Super Duty Lariat 2017,2020 Ford F-350 Super Duty Platinum 2017,2020 Ford F-350 Super Duty XL 2017,2020 Ford F-350 Super Duty XLT

This Super Duty lift kit is perfect for the enthusiast looking to run oversized tires and wants additional wheel travel for offroad use. With the large Super Duty wheelwell openings and this quality 2.5in lift kit, you can run 35in tall tires with ease. Fabtech's coil springs retain the factory load carrying capacity while providing increased suspension travel. The coil springs and associated bracketry allow for an additional inch of compression travel over stock without binding the suspension. This extra travel helps when offroading in rugged terrain. Sway bar drop brackets are included to reposition the front bar so that the link ends do not go over center at full droop and cause bind. The brake lines are relocated down on the frame with extension brackets to eliminate the possibility of overstretching the lines throughout the new travel range. Fabtech provides extension brackets rather than longer brake lines to keep the factory brake system sealed for fast and trouble-free installation. This suspension kit utilizes the factory bump stops without extensions. This allows for more travel with the Fabtech coil springs and components. Typically, once a Super Duty is lifted the front axle is pushed to one side due to the length of the track bar and the location. To address this issue Fabtech provides a heavy-duty 1/4in thick steel Track Bar mount. It repositions the track bar and front axle under the vehicle to the factory specifications. This provides proper tracking of the front and rear axle for excellent highway manners. This Super Duty lift kit includes Fabtech Stealth shocks. They are a sealed monotube shock that has a Nitrocarb piston rod for corrosion resistance and resist rock chipping. They will provide a great highway ride with good offroad damping capacity. With the installation of this 2.5in lift the vehicle's stance front to rear will be nearly flat compared to the factory nose-down appearance. For owners that want to retain more of the factory nose-downThis Part Fits: Year Make Model Submodel 2017-2023 Ford F-250 Super Duty King Ranch 2017-2023 Ford F-250 Super Duty Lariat 2018-2023 Ford F-250 Super Duty Limited 2017-2023 Ford F-250 Super Duty Platinum 2017-2023 Ford F-250 Super Duty XL 2017-2023 Ford F-250 Super Duty XLT 2017-2023 Ford F-350 Super Duty King Ranch 2017-2023 Ford F-350 Super Duty Lariat 2018-2023 Ford F-350 Super Duty Limited 2017-2023 Ford F-350 Super Duty Platinum 2017-2023 Ford F-350 Super Duty XL 2017-2023 Ford F-350 Super Duty XLT

This Super Duty lift kit is perfect for the enthusiast looking to run oversized tires and wants additional wheel travel for offroad use. With the large Super Duty wheelwell openings and this quality 2.5in lift kit, you can run 35in tall tires with ease. Fabtech's coil springs retain the factory load carrying capacity while providing increased suspension travel. The coil springs and associated bracketry allow for an additional inch of compression travel over stock without binding the suspension. This extra travel helps when offroading in rugged terrain. Sway bar drop brackets are included to reposition the front bar so that the link ends do not go over center at full droop and cause bind. The brake lines are relocated down on the frame with extension brackets to eliminate the possibility of overstretching the lines throughout the new travel range. Fabtech provides extension brackets rather than longer brake lines to keep the factory brake system sealed for fast and trouble-free installation. This suspension kit utilizes the factory bump stops without extensions. This allows for more travel with the Fabtech coil springs and components. To help keep the factory alignment specifications of the vehicle, Fabtech includes 2 degree adjustable alignment ball joint inserts. They help retain the factory caster specifications for optimum driveability. After a Super Duty is lifted the front axle is pushed to one side due to the length of the track bar. To address this issue Fabtech provides a heavy-duty adjustable track bar. The Fabtech track bar allows for on the vehicle adjustment to center the axle under the vehicle. This provides proper tracking of the front and rear axle for excellent highway manners. This Super Duty lift kit retains the factory shocks with heavy duty shock extension brackets for a stock like ride. With the installation of this 2.5in lift the vehicle's stance front to rear will be nearly flat compared to the factory nose-down appearance. For owners that wanThis Part Fits: Year Make Model Submodel 2017-2023 Ford F-250 Super Duty King Ranch 2017-2023 Ford F-250 Super Duty Lariat 2018-2023 Ford F-250 Super Duty Limited 2017-2023 Ford F-250 Super Duty Platinum 2017-2023 Ford F-250 Super Duty XL 2017-2023 Ford F-250 Super Duty XLT 2017-2023 Ford F-350 Super Duty King Ranch 2017-2023 Ford F-350 Super Duty Lariat 2018-2023 Ford F-350 Super Duty Limited 2017-2023 Ford F-350 Super Duty Platinum 2017-2023 Ford F-350 Super Duty XL 2017-2023 Ford F-350 Super Duty XLT

This Super Duty lift kit is perfect for the enthusiast looking to run oversized tires and wants additional wheel travel for offroad use. With the large Super Duty wheelwell openings and this quality 2.5in lift kit, you can run 35in tall tires with ease. Fabtech's coil springs retain the factory load carrying capacity while providing increased suspension travel. The coil springs and associated bracketry allow for an additional inch of compression travel over stock without binding the suspension. This extra travel helps when offroading in rugged terrain. Sway bar drop brackets are included to reposition the front bar so that the link ends do not go over center at full droop and cause bind. The brake lines are relocated down on the frame with extension brackets to eliminate the possibility of overstretching the lines throughout the new travel range. Fabtech provides extension brackets rather than longer brake lines to keep the factory brake system sealed for fast and trouble-free installation. This suspension kit utilizes the factory bump stops without extensions. This allows for more travel with the Fabtech coil springs and components. Typically, once a Super Duty is lifted the front axle is pushed to one side due to the length of the track bar and the location. To address this issue Fabtech provides a heavy-duty 1/4in thick steel Track Bar mount. It repositions the track bar and front axle under the vehicle to the factory specifications. This provides proper tracking of the front and rear axle for excellent highway manners. This Super Duty lift kit retains the factory shocks with heavy duty shock extension brackets for a stock like ride. With the installation of this 2.5in lift the vehicle's stance front to rear will be nearly flat compared to the factory nose-down appearance. For owners that want to retain more of the factory nose-down appearance, Fabtech offers an optional 4in rear block kit (FTS22214). The 4in blocks replace the factory 2.5in blocks and will proviThis Part Fits: Year Make Model Submodel 2017-2023 Ford F-250 Super Duty King Ranch 2017-2023 Ford F-250 Super Duty Lariat 2018-2023 Ford F-250 Super Duty Limited 2017-2023 Ford F-250 Super Duty Platinum 2017-2023 Ford F-250 Super Duty XL 2017-2023 Ford F-250 Super Duty XLT 2017-2023 Ford F-350 Super Duty King Ranch 2017-2023 Ford F-350 Super Duty Lariat 2018-2023 Ford F-350 Super Duty Limited 2017-2023 Ford F-350 Super Duty Platinum 2017-2023 Ford F-350 Super Duty XL 2017-2023 Ford F-350 Super Duty XLT

This Super Duty lift kit is perfect for the enthusiast looking to run oversized tires and wants additional wheel travel for offroad use. With the large Super Duty wheelwell openings and this quality 2.5in lift kit, you can run 35in tall tires with ease. Fabtech's coil springs retain the factory load carrying capacity while providing increased suspension travel. The coil springs and associated bracketry allow for an additional inch of compression travel over stock without binding the suspension. This extra travel helps when offroading in rugged terrain. Sway bar drop brackets are included to reposition the front bar so that the link ends do not go over center at full droop and cause bind. The brake lines are relocated down on the frame with extension brackets to eliminate the possibility of overstretching the lines throughout the new travel range. Fabtech provides extension brackets rather than longer brake lines to keep the factory brake system sealed for fast and trouble-free installation. This suspension kit utilizes the factory bump stops without extensions. This allows for more travel with the Fabtech coil springs and components. To help keep the factory alignment specifications of the vehicle, Fabtech includes 2 degree adjustable alignment ball joint inserts. They help retain the factory caster specifications for optimum driveability. After a Super Duty is lifted the front axle is pushed to one side due to the length of the track bar. To address this issue Fabtech provides a heavy-duty adjustable track bar. The Fabtech track bar allows for on the vehicle adjustment to center the axle under the vehicle. This provides proper tracking of the front and rear axle for excellent highway manners. This Super Duty lift kit comes with Dirt Logic 2.25 shocks. They are constructed with a stainless steel body and a NitroSteel piston rod for maximum corrosion resistance and durability. They will provide a superior ride quality both on and offroad with excellent damping for ofThis Part Fits: Year Make Model Submodel 2017-2023 Ford F-250 Super Duty King Ranch 2017-2023 Ford F-250 Super Duty Lariat 2018-2023 Ford F-250 Super Duty Limited 2017-2023 Ford F-250 Super Duty Platinum 2017-2023 Ford F-250 Super Duty XL 2017-2023 Ford F-250 Super Duty XLT 2017-2023 Ford F-350 Super Duty King Ranch 2017-2023 Ford F-350 Super Duty Lariat 2018-2023 Ford F-350 Super Duty Limited 2017-2023 Ford F-350 Super Duty Platinum 2017-2023 Ford F-350 Super Duty XL 2017-2023 Ford F-350 Super Duty XLT

This Super Duty lift kit is perfect for the enthusiast looking to run oversized tires and wants additional wheel travel for offroad use. With the large Super Duty wheelwell openings and this quality 2.5in lift kit, you can run 35in tall tires with ease. Fabtech's coil springs retain the factory load carrying capacity while providing increased suspension travel. The coil springs and associated bracketry allow for an additional inch of compression travel over stock without binding the suspension. This extra travel helps when offroading in rugged terrain. Sway bar drop brackets are included to reposition the front bar so that the link ends do not go over center at full droop and cause bind. The brake lines are relocated down on the frame with extension brackets to eliminate the possibility of overstretching the lines throughout the new travel range. Fabtech provides extension brackets rather than longer brake lines to keep the factory brake system sealed for fast and trouble-free installation. This suspension kit utilizes the factory bump stops without extensions. This allows for more travel with the Fabtech coil springs and components. To help keep the factory alignment specifications of the vehicle, Fabtech includes 2 degree adjustable alignment ball joint inserts. They help retain the factory caster specifications for optimum driveability. After a Super Duty is lifted the front axle is pushed to one side due to the length of the track bar. To address this issue Fabtech provides a heavy-duty adjustable track bar. The Fabtech track bar allows for on the vehicle adjustment to center the axle under the vehicle. This provides proper tracking of the front and rear axle for excellent highway manners. This Super Duty lift kit comes with Dirt Logic 2.25 shocks. They are constructed with a stainless steel body and a NitroSteel piston rod for maximum corrosion resistance and durability. They will provide a superior ride quality both on and offroad with excellent damping for ofThis Part Fits: Year Make Model Submodel 2017-2023 Ford F-250 Super Duty King Ranch 2017-2023 Ford F-250 Super Duty Lariat 2018-2023 Ford F-250 Super Duty Limited 2017-2023 Ford F-250 Super Duty Platinum 2017-2023 Ford F-250 Super Duty XL 2017-2023 Ford F-250 Super Duty XLT 2017-2023 Ford F-350 Super Duty King Ranch 2017-2023 Ford F-350 Super Duty Lariat 2018-2023 Ford F-350 Super Duty Limited 2017-2023 Ford F-350 Super Duty Platinum 2017-2023 Ford F-350 Super Duty XL 2017-2023 Ford F-350 Super Duty XLT

This Super Duty lift kit is perfect for the enthusiast looking to run oversized tires and wants additional wheel travel for offroad use. With the large Super Duty wheelwell openings and this quality 2.5in lift kit, you can run 35in tall tires with ease. Fabtech's coil springs retain the factory load carrying capacity while providing increased suspension travel. The coil springs and associated bracketry allow for an additional inch of compression travel over stock without binding the suspension. This extra travel helps when offroading in rugged terrain. Sway bar drop brackets are included to reposition the front bar so that the link ends do not go over center at full droop and cause bind. The brake lines are relocated down on the frame with extension brackets to eliminate the possibility of overstretching the lines throughout the new travel range. Fabtech provides extension brackets rather than longer brake lines to keep the factory brake system sealed for fast and trouble-free installation. This suspension kit utilizes the factory bump stops without extensions. This allows for more travel with the Fabtech coil springs and components. To help keep the factory alignment specifications of the vehicle, Fabtech includes 2 degree adjustable alignment ball joint inserts. They help retain the factory caster specifications for optimum driveability. After a Super Duty is lifted the front axle is pushed to one side due to the length of the track bar. To address this issue Fabtech provides a heavy-duty adjustable track bar. The Fabtech track bar allows for on the vehicle adjustment to center the axle under the vehicle. This provides proper tracking of the front and rear axle for excellent highway manners. This Super Duty lift kit includes Fabtech Performance shocks. They are a twin tube shock that will provide a good highway ride with the ability to tackle offroad. With the installation of this 2.5in lift the vehicle's stance front to rear will be nearly flat compared to the faThis Part Fits: Year Make Model Submodel 2017-2023 Ford F-250 Super Duty King Ranch 2017-2023 Ford F-250 Super Duty Lariat 2018-2023 Ford F-250 Super Duty Limited 2017-2023 Ford F-250 Super Duty Platinum 2017-2023 Ford F-250 Super Duty XL 2017-2023 Ford F-250 Super Duty XLT 2017-2023 Ford F-350 Super Duty King Ranch 2017-2023 Ford F-350 Super Duty Lariat 2018-2023 Ford F-350 Super Duty Limited 2017-2023 Ford F-350 Super Duty Platinum 2017-2023 Ford F-350 Super Duty XL 2017-2023 Ford F-350 Super Duty XLT

This Super Duty lift kit is perfect for the enthusiast looking to run oversized tires and wants additional wheel travel for offroad use. With the large Super Duty wheelwell openings and this quality 2.5in lift kit, you can run 35in tall tires with ease. Fabtech's coil springs retain the factory load carrying capacity while providing increased suspension travel. The coil springs and associated bracketry allow for an additional inch of compression travel over stock without binding the suspension. This extra travel helps when offroading in rugged terrain. Sway bar drop brackets are included to reposition the front bar so that the link ends do not go over center at full droop and cause bind. The brake lines are relocated down on the frame with extension brackets to eliminate the possibility of overstretching the lines throughout the new travel range. Fabtech provides extension brackets rather than longer brake lines to keep the factory brake system sealed for fast and trouble-free installation. This suspension kit utilizes the factory bump stops without extensions. This allows for more travel with the Fabtech coil springs and components. Typically, once a Super Duty is lifted the front axle is pushed to one side due to the length of the track bar and the location. To address this issue Fabtech provides a heavy-duty 1/4in thick steel Track Bar mount. It repositions the track bar and front axle under the vehicle to the factory specifications. This provides proper tracking of the front and rear axle for excellent highway manners. This Super Duty lift kit comes with Dirt Logic 2.25 shocks. They are constructed with a stainless steel body and a NitroSteel piston rod for maximum corrosion resistance and durability. They will provide a superior ride quality both on and offroad with excellent damping for offroad use. With the installation of this 2.5in lift the vehicle's stance front to rear will be nearly flat compared to the factory nose-down appearance. For owners that wantThis Part Fits: Year Make Model Submodel 2017-2023 Ford F-250 Super Duty King Ranch 2017-2023 Ford F-250 Super Duty Lariat 2018-2023 Ford F-250 Super Duty Limited 2017-2023 Ford F-250 Super Duty Platinum 2017-2023 Ford F-250 Super Duty XL 2017-2023 Ford F-250 Super Duty XLT 2017-2023 Ford F-350 Super Duty King Ranch 2017-2023 Ford F-350 Super Duty Lariat 2018-2023 Ford F-350 Super Duty Limited 2017-2023 Ford F-350 Super Duty Platinum 2017-2023 Ford F-350 Super Duty XL 2017-2023 Ford F-350 Super Duty XLT

This Super Duty lift kit is perfect for the enthusiast looking to run oversized tires and wants additional wheel travel for offroad use. With the large Super Duty wheelwell openings and this quality 2.5in lift kit, you can run 35in tall tires with ease. Fabtech's coil springs retain the factory load carrying capacity while providing increased suspension travel. The coil springs and associated bracketry allow for an additional inch of compression travel over stock without binding the suspension. This extra travel helps when offroading in rugged terrain. Sway bar drop brackets are included to reposition the front bar so that the link ends do not go over center at full droop and cause bind. The brake lines are relocated down on the frame with extension brackets to eliminate the possibility of overstretching the lines throughout the new travel range. Fabtech provides extension brackets rather than longer brake lines to keep the factory brake system sealed for fast and trouble-free installation. This suspension kit utilizes the factory bump stops without extensions. This allows for more travel with the Fabtech coil springs and components. Typically, once a Super Duty is lifted the front axle is pushed to one side due to the length of the track bar and the location. To address this issue Fabtech provides a heavy-duty 1/4in thick steel Track Bar mount. It repositions the track bar and front axle under the vehicle to the factory specifications. This provides proper tracking of the front and rear axle for excellent highway manners. This Super Duty lift kit includes Fabtech Performance shocks. They are a twin tube shock that will provide a good highway ride with the ability to tackle offroad. With the installation of this 2.5in lift the vehicle's stance front to rear will be nearly flat compared to the factory nose-down appearance. For owners that want to retain more of the factory nose-down appearance, Fabtech offers an optional 4in rear block kit (FTS22214). The 4in blocksThis Part Fits: Year Make Model Submodel 2017-2023 Ford F-250 Super Duty King Ranch 2017-2023 Ford F-250 Super Duty Lariat 2018-2023 Ford F-250 Super Duty Limited 2017-2023 Ford F-250 Super Duty Platinum 2017-2023 Ford F-250 Super Duty XL 2017-2023 Ford F-250 Super Duty XLT 2017-2023 Ford F-350 Super Duty King Ranch 2017-2023 Ford F-350 Super Duty Lariat 2018-2023 Ford F-350 Super Duty Limited 2017-2023 Ford F-350 Super Duty Platinum 2017-2023 Ford F-350 Super Duty XL 2017-2023 Ford F-350 Super Duty XLT

Fabtech?s 6? 4 Link Conversion system for the Ford F450 and F550 Super Duty is built to handle the on and offroad demands of the truck enthusiast. This vehicle?s suspension is more robust than the Ford F250 and F350 and therefore demands specialty parts only available from Fabtech. This system comes with everything needed to convert to a 4 Link front suspension. The system will provide less caster change throughout the travel range which benefits on road driving. Offroad the 4 Link system will provide more articulation than a Radius Arm for increased terrain traversing at all speeds. Fabtech?s 4 Link System has been proven in over 10 years of service in consumer, commercial and military applications. High quality components with properly design suspension geometry is the pinnacle of Super Duty suspension systems. Each Fabtech component is expertly built in house. Fabtech Heavy Duty Link Arms. Fabtech Front Coil Springs. Trac Bar Relocation Bracket. Sway Bar Drop Brackets. Pitman Arm. Rear Block & U-bolt Kit. Includes front and rear Dirt Logic shocks.

Fabtech?s 6? 4 Link Conversion system for the Ford F450 and F550 Super Duty is built to handle the on and offroad demands of the truck enthusiast. This vehicle?s suspension is more robust than the Ford F250 and F350 and therefore demands specialty parts only available from Fabtech. This system comes with everything needed to convert to a 4 Link front suspension. The system will provide less caster change throughout the travel range which benefits on road driving. Offroad the 4 Link system will provide more articulation than a Radius Arm for increased terrain traversing at all speeds. Fabtech?s 4 Link System has been proven in over 10 years of service in consumer, commercial and military applications. High quality components with properly design suspension geometry is the pinnacle of Super Duty suspension systems. Each Fabtech component is expertly built in house. Fabtech Heavy Duty Link Arms. Fabtech Front Coil Springs. Trac Bar Relocation Bracket. Sway Bar Drop Brackets. Pitman Arm. Rear Block & U-bolt Kit. Includes front and rear Performance shocks.

Fabtech?s 6? 4 Link Conversion system for the Ford F450 and F550 Super Duty is built to handle the on and offroad demands of the truck enthusiast. This vehicle?s suspension is more robust than the Ford F250 and F350 and therefore demands specialty parts only available from Fabtech. This system comes with everything needed to convert to a 4 Link front suspension. The system will provide less caster change throughout the travel range which benefits on road driving. Offroad the 4 Link system will provide more articulation than a Radius Arm for increased terrain traversing at all speeds. Fabtech?s 4 Link System has been proven in over 10 years of service in consumer, commercial and military applications. High quality components with properly design suspension geometry is the pinnacle of Super Duty suspension systems. Each Fabtech component is expertly built in house. Fabtech Heavy Duty Link Arms. Fabtech Front Coil Springs. Trac Bar Relocation Bracket. Sway Bar Drop Brackets. Pitman Arm. Rear Block & U-bolt Kit. Includes front and rear Stealth shocks.

Fabtech?s 6" Radius Arm system for the Ford F450 and F550 Super Duty is built to handle the on and offroad demands of the truck enthusiast. This vehicle?s suspension is more robust than the Ford F250 and F350 and therefore demands specialty parts only available from Fabtech. This Radius Arm system is a complete upgrade to the factory suspension and will provide additional strength for use with oversized tires. The design has been proven in over 10 years of service in consumer, commercial and military applications. High quality components with properly designed suspension geometry is what sets this system apart from all other Radius Arm suspensions. Each Fabtech component has been designed with specific features and benefits that create this quality suspension system. Fabtech Replacement Radius Arms. Dirt Logic 4.0 Resi Coilovers. Trac Bar Relocation Bracket. Sway Bar Drop Brackets. Pitman Arm. Rear Block & U-bolt Kit. Rear Dirt Logic 2.25 shocks.

Fabtech's 6" Radius Arm system for the Ford F450 and F550 Super Duty is built to handle the on and offroad demands of the truck enthusiast. This vehicle's suspension is more robust than the Ford F250 and F350 and therefore demands specialty parts only available from Fabtech. This Radius Arm system is a complete upgrade to the factory suspension and will provide additional strength for use with oversized tires. The design has been proven in over 10 years of service in consumer, commercial and military applications. High quality components with properly designed suspension geometry is what sets this system apart from all other Radius Arm suspensions. Each Fabtech component has been designed with specific features and benefits that create this quality suspension system. For a greater understand of each these components please see below.

Fabtech's 6" Radius Arm system for the Ford F450 and F550 Super Duty is built to handle the on and offroad demands of the truck enthusiast. This vehicle's suspension is more robust than the Ford F250 and F350 and therefore demands specialty parts only available from Fabtech. This Radius Arm system is a complete upgrade to the factory suspension and will provide additional strength for use with oversized tires. The design has been proven in over 10 years of service in consumer, commercial and military applications. High quality components with properly designed suspension geometry is what sets this system apart from all other Radius Arm suspensions. Each Fabtech component has been designed with specific features and benefits that create this quality suspension system. For a greater understand of each these components please see below.