RockJock TJ/LJ/XJ/MJ Currectlync Steering System Bolt-On w/ 1 1/4in Dia. Tie Rod/Forged Drag Link
$712.00
RockJocks Currectlync(R) heavy duty tie rod and drag link system for Jeep TJ, LJ, XJ, MJ and ZJ vehicles features, a 1 ¼' diameter forged alloy drag link, and 1 ¼' solid alloy steel tie rod bar that is bored and threaded on the ends. All 7/8 in. thread tie rod ends with boots are included as well as the RockJock heavy duty steering stabilizer bracket. This unit is a direct replacement for the stock parts. No modifications or machining to any part of the vehicle is necessary. This unit is rated at 200% stronger than the stock components. NOTE: This unit is designed to be used on vehicles with 4 in. of lift. It can be used on vehicles with less lift, but the vehicle must have a minimum of a 2 in. bump stop (over stock). Also, on vehicles with no lift, 2 of the tie rod ends may need be trimmed to achieve proper adjustment.This Part Fits:
Year
Make
Model
Submodel
1984-1993
Jeep
Cherokee
Base
1991-1992
Jeep
Cherokee
Briarwood
1985-1988
Jeep
Cherokee
Chief
1996,1998-2001
Jeep
Cherokee
Classic
1993-1997
Jeep
Cherokee
Country
1985-1992
Jeep
Cherokee
Laredo
1987-1992,1998-2001
Jeep
Cherokee
Limited
1985-1990
Jeep
Cherokee
Pioneer
1994-2001
Jeep
Cherokee
SE
1989-2001
Jeep
Cherokee
Sport
1987-1992
Jeep
Comanche
Base
1987-1988
Jeep
Comanche
Chief
1986
Jeep
Comanche
Custom
1988-1992
Jeep
Comanche
Eliminator
1987-1988
Jeep
Comanche
Laredo
1987-1992
Jeep
Comanche
Pioneer
1986
Jeep
Comanche
X
1986
Jeep
Comanche
XLS
2006
Jeep
Wrangler
65th Anniversary Edition
2003-2006
Jeep
Wrangler
Rubicon
1997-2004
Jeep
Wrangler
Sahara
1997-2006
Jeep
Wrangler
SE
1997-2006
Jeep
Wrangler
Sport
2004-2006
Jeep
Wrangler
Unlimited
2005-2006
Jeep
Wrangler
Unlimited Rubicon
2002-2006
Jeep
Wrangler
X
RockJock Johnny Joint Rod End 2 1/2in Narrow Forged 2.625in X .562in Ball 7/8in-14 RH Thread Shank
$66.00
RockJocks narrow forged Johnny Joints(R) for fabricators and suspension system builders offer 40 degrees of unrestricted movement in any direction as compared to 22 degrees on a common heim joint! Johnny Joint(R) rod ends offer cushioning that a heim joint cannot provide via high-density urethane bushing that encases the inner ball. The heat treated center balls are cross-drilled for thru-bolt lubrication and the joint internals are retained with 2 heavy duty, heat treated side washers and a snap ring. This specific joint is a 2 1/2 in. diameter, fitted with a zerk fitting for greasing, 2 1/4 in. of 7/8 in.-14 right hand threads on the shank, and a 2.625 in. mounting width ball with a .562 in. thru bolt hole. Finished in gold zinc plating.
RockJock Johnny Joint Rod End 2in Narrow Forged 1.600in X .562in Ball 7/8in-14 LH Thread Shank
$66.00
RockJocks narrow forged Johnny Joints(R) for fabricators and suspension system builders offer 40 degrees of unrestricted movement in any direction as compared to 22 degrees on a common heim joint! Johnny Joint(R) rod ends offer cushioning that a heim joint cannot provide via high-density urethane bushing that encases the inner ball. The heat treated center balls are cross-drilled for thru-bolt lubrication and the joint internals are retained with 2 heavy duty, heat treated side washers and a snap ring. This specific joint is a 2 in. diameter, fitted with a zerk fitting for greasing, 2 1/4 in. of 7/8 in.-14 left hand threads on the shank, and a 1.600 in. mounting width ball with a .562 in. thru bolt hole. Finished in gold zinc plating.
RockJock Johnny Joint Rod End 2in Narrow Forged 1.600in X .562in Ball 7/8in-14 RH Thread Shank
$66.00
RockJocks narrow forged Johnny Joints(R) for fabricators and suspension system builders offer 40 degrees of unrestricted movement in any direction as compared to 22 degrees on a common heim joint! Johnny Joint(R) rod ends offer cushioning that a heim joint cannot provide via high-density urethane bushing that encases the inner ball. The heat treated center balls are cross-drilled for thru-bolt lubrication and the joint internals are retained with 2 heavy duty, heat treated side washers and a snap ring. This specific joint is a 2 in. diameter, fitted with a zerk fitting for greasing, 2 1/4 in. of 7/8 in.-14 right hand threads on the shank, and a 1.600 in. mounting width ball with a .562 in. thru bolt hole. Finished in gold zinc plating.
RockJock Johnny Joint Rod End 2 1/2in Forged 2.625in X .562in Ball 1 1/4in-12 LH Thread Shank
$66.00
RockJocks forged narrow Johnny Joints(R) for fabricators and suspension system builders offer 40 degrees of unrestricted movement in any direction as compared to 22 degrees on a common heim joint! Johnny Joint(R) rod ends offer cushioning that a heim joint cannot provide via a high-density urethane bushing that encases the inner ball. The heat treated center balls are cross-drilled for thru-bolt lubrication and the joint internals are retained with 2 heavy duty, heat treated side washers and a snap ring. This specific joint is a 2 1/2 in. diameter, fitted with a zerk fitting for greasing, 2 1/4 in. of 1 1/4 in.-12 left hand threads on the shank, and a 2.625 in. mounting width ball with a .562 in. thru bolt hole. Finished in gold zinc plating.
RockJock Johnny Joint 2 1/2in Forged 2.365in X .562in Offset Ball 1 1/4in-12 RH Thread Shank
$66.00
RockJocks forged narrow Johnny Joints(R) for fabricators and suspension system builders offer 40 degrees of unrestricted movement in any direction as compared to 22 degrees on a common heim joint! Johnny Joint(R) rod ends offer cushioning that a heim joint cannot provide via a high-density urethane bushing that encases the inner ball. The heat treated center balls are cross-drilled for thru-bolt lubrication and the joint internals are retained with 2 heavy duty, heat treated side washers and a snap ring. This specific joint is a 2 1/2 in. diameter, fitted with a zerk fitting for greasing, 2 1/4 in. of 1 1/4 in.-12 right hand threads on the shank, and a 2.365 in. mounting width offset ball with a .562 in. thru bolt hole. Finished in gold zinc plating.
RockJock Johnny Joint Rod End 2 1/2in Forged 2.625in X .562in Ball 1 1/4in-12 RH Thread Shank
$66.00
RockJocks forged narrow Johnny Joints(R) for fabricators and suspension system builders offer 40 degrees of unrestricted movement in any direction as compared to 22 degrees on a common heim joint! Johnny Joint(R) rod ends offer cushioning that a heim joint cannot provide via a high-density urethane bushing that encases the inner ball. The heat treated center balls are cross-drilled for thru-bolt lubrication and the joint internals are retained with 2 heavy duty, heat treated side washers and a snap ring. This specific joint is a 2 1/2 in. diameter, fitted with a zerk fitting for greasing, 2 1/4 in. of 1 1/4 in.-12 right hand threads on the shank, and a 2.625 in. mounting width ball with a .562 in. thru bolt hole. Finished in gold zinc plating.
RockJock Johnny Joint Rod End 2 1/2in Forged 2.625in X .640in Ball 1 1/4in-12 LH Thread Shank
$66.00
RockJocks forged Johnny Joints(R) for fabricators and suspension system builders offer 30 degrees of unrestricted movement in any direction as compared to 22 degrees on a common heim joint! Johnny Joint(R) rod ends offer cushioning that a heim joint cannot provide via high-density urethane bushings that encase the inner ball. The heat treated center balls are cross-drilled for thru-bolt lubrication and the joint internals are retained with 2 heavy duty, heat treated side washers and a snap ring. This specific joint is a 2 1/2 in. diameter, fitted with a zerk fitting for greasing, 2 1/4 in. of 1 1/4 in.-12 left hand threads on the shank, and a 2.625 in. mounting width ball with a .640 in. thru bolt hole. Finished in gold zinc plating.
RockJock Johnny Joint Rod End 2 1/2in Forged 3.280in X .718in Ball 1 1/4in-12 LH Thread Shank
$66.00
RockJocks forged Johnny Joints(R) for fabricators and suspension system builders offer 30 degrees of unrestricted movement in any direction as compared to 22 degrees on a common heim joint! Johnny Joint(R) rod ends offer cushioning that a heim joint cannot provide via high-density urethane bushings that encase the inner ball. The heat treated center balls are cross-drilled for thru-bolt lubrication and the joint internals are retained with 2 heavy duty, heat treated side washers and a snap ring. This specific joint is a 2 1/2 in. diameter, fitted with a zerk fitting for greasing, 2 1/4 in. of 1 1/4 in.-12 left hand threads on the shank, and a 3.280 in. mounting width ball with a .718 in. thru bolt hole. Finished in gold zinc plating.
RockJock Johnny Joint Rod End 2 1/2in Forged 2.625in X .562in Ball 1 1/4in-12 LH Thread Shank
$66.00
RockJocks forged Johnny Joints(R) for fabricators and suspension system builders offer 30 degrees of unrestricted movement in any direction as compared to 22 degrees on a common heim joint! Johnny Joint(R) rod ends offer cushioning that a heim joint cannot provide via high-density urethane bushings that encase the inner ball. The heat treated center balls are cross-drilled for thru-bolt lubrication and the joint internals are retained with 2 heavy duty, heat treated side washers and a snap ring. This specific joint is a 2 1/2 in. diameter, fitted with a zerk fitting for greasing, 2 1/4 in. of 1 1/4 in.-12 left hand threads on the shank, and a 2.625 in. mounting width ball with a .562 in. thru bolt hole. Finished in gold zinc plating.
RockJock Johnny Joint Rod End 2 1/2in Forged 2.625in X .640in Ball 1 1/4in-12 RH Thread Shank
$66.00
RockJocks forged Johnny Joints(R) for fabricators and suspension system builders offer 30 degrees of unrestricted movement in any direction as compared to 22 degrees on a common heim joint! Johnny Joint(R) rod ends offer cushioning that a heim joint cannot provide via high-density urethane bushings that encase the inner ball. The heat treated center balls are cross-drilled for thru-bolt lubrication and the joint internals are retained with 2 heavy duty, heat treated side washers and a snap ring. This specific joint is a 2 1/2 in. diameter, fitted with a zerk fitting for greasing, 2 1/4 in. of 1 1/4 in.-12 right hand threads on the shank, and a 2.625 in. mounting width ball with a .640 in. thru bolt hole. Finished in gold zinc plating.
RockJock Johnny Joint Rod End 2 1/2in Forged 2.812in X .750in Ball 1 1/4in-12 RH Thread Shank
$66.00
RockJocks forged Johnny Joints(R) for fabricators and suspension system builders offer 30 degrees of unrestricted movement in any direction as compared to 22 degrees on a common heim joint! Johnny Joint(R) rod ends offer cushioning that a heim joint cannot provide via high-density urethane bushings that encase the inner ball. The heat treated center balls are cross-drilled for thru-bolt lubrication and the joint internals are retained with 2 heavy duty, heat treated side washers and a snap ring. This specific joint is a 2 1/2 in. diameter, fitted with a zerk fitting for greasing, 2 1/4 in. of 1 1/4 in.-12 right hand threads on the shank, and a 2.812 in. mounting width ball with a .750 in. thru bolt hole. Finished in gold zinc plating.
RockJock Johnny Joint Rod End 2 1/2in Forged 2.440in x .570in Ball 1 1/4in-12 RH Thread Shank
$66.00
RockJock's forged Johnny Joints for fabricators and suspension system builders offer 30 degrees of unrestricted movement in any direction as compared to 22 degrees on a common heim joint! Johnny Joint rod ends offer cushioning that a heim joint cannot provide via high-density urethane bushings that encase the inner ball. The heat treated center balls are cross-drilled for thru-bolt lubrication and the joint internals are retained with 2 heavy duty, heat treated side washers and a snap ring. This specific joint is a 2 1/2 in. diameter, fitted with a zerk fitting for greasing, 2.3 in. of 1 1/4 in.-12 right hand threads on the shank, and a 2.440 in. mounting width ball with a .570 in. thru bolt hole. Finished in gold zinc plating.
RockJock Johnny Joint Rod End 2 1/2in Forged 2.625in X .562in Ball 1 1/4in-12 RH Thread Shank
$66.00
RockJocks forged Johnny Joints(R) for fabricators and suspension system builders offer 30 degrees of unrestricted movement in any direction as compared to 22 degrees on a common heim joint! Johnny Joint(R) rod ends offer cushioning that a heim joint cannot provide via high-density urethane bushings that encase the inner ball. The heat treated center balls are cross-drilled for thru-bolt lubrication and the joint internals are retained with 2 heavy duty, heat treated side washers and a snap ring. This specific joint is a 2 1/2 in. diameter, fitted with a zerk fitting for greasing, 2 1/4 in. of 1 1/4 in.-12 right hand threads on the shank, and a 2.625 in. mounting width ball with a .562 in. thru bolt hole. Finished in gold zinc plating.
RockJock Johnny Joint Rod End 2 1/2in Forged 2.812in X .750in Ball 1in-14 LH Thread Shank
$66.00
RockJocks forged Johnny Joints(R) for fabricators and suspension system builders offer 30 degrees of unrestricted movement in any direction as compared to 22 degrees on a common heim joint! Johnny Joint(R) rod ends offer cushioning that a heim joint cannot provide via high-density urethane bushings that encase the inner ball. The heat treated center balls are cross-drilled for thru-bolt lubrication and the joint internals are retained with 2 heavy duty, heat treated side washers and a snap ring. This specific joint is a 2 1/2 in. diameter, fitted with a zerk fitting for greasing, 2 1/4 in. of 1 in.-14 left hand threads on the shank, and a 2.812 in. mounting width ball with a .750 in. thru bolt hole. Finished in gold zinc plating.
RockJock Johnny Joint Rod End 2 1/2in Forged 2.625in X .562in Ball 1in-14 LH Thread Shank
$66.00
RockJocks forged Johnny Joints(R) for fabricators and suspension system builders offer 30 degrees of unrestricted movement in any direction as compared to 22 degrees on a common heim joint! Johnny Joint(R) rod ends offer cushioning that a heim joint cannot provide via high-density urethane bushings that encase the inner ball. The heat treated center balls are cross-drilled for thru-bolt lubrication and the joint internals are retained with 2 heavy duty, heat treated side washers and a snap ring. This specific joint is a 2 1/2 in. diameter, fitted with a zerk fitting for greasing, 2 1/4 in. of 1 in.-14 left hand threads on the shank, and a 2.625 in. mounting width ball with a .562 in. thru bolt hole. Finished in gold zinc plating.
RockJock Johnny Joint Rod End 2 1/2in Forged 2.625in X .640in Ball 1in-14 RH Thread Shank
$66.00
RockJocks forged Johnny Joints(R) for fabricators and suspension system builders offer 30 degrees of unrestricted movement in any direction as compared to 22 degrees on a common heim joint! Johnny Joint(R) rod ends offer cushioning that a heim joint cannot provide via high-density urethane bushings that encase the inner ball. The heat treated center balls are cross-drilled for thru-bolt lubrication and the joint internals are retained with 2 heavy duty, heat treated side washers and a snap ring. This specific joint is a 2 1/2 in. diameter, fitted with a zerk fitting for greasing, 2 1/4 in. of 1 in.-14 right hand threads on the shank, and a 2.625 in. mounting width ball with a .640 in. thru bolt hole. Finished in gold zinc plating.
RockJock Johnny Joint Rod End 2 1/2in Forged 2.812in X .750in Ball 1in-14 RH Thread Shank
$66.00
RockJocks forged Johnny Joints(R) for fabricators and suspension system builders offer 30 degrees of unrestricted movement in any direction as compared to 22 degrees on a common heim joint! Johnny Joint(R) rod ends offer cushioning that a heim joint cannot provide via high-density urethane bushings that encase the inner ball. The heat treated center balls are cross-drilled for thru-bolt lubrication and the joint internals are retained with 2 heavy duty, heat treated side washers and a snap ring. This specific joint is a 2 1/2 in. diameter, fitted with a zerk fitting for greasing, 2 1/4 in. of 1 in.-14 right hand threads on the shank, and a 2.812 in. mounting width ball with a .750 in. thru bolt hole. Finished in gold zinc plating.
RockJock Johnny Joint Rod End 2 1/2in Forged 2.625in X .562in Ball 1in-14 RH Thread Shank
$66.00
RockJocks forged Johnny Joints(R) for fabricators and suspension system builders offer 30 degrees of unrestricted movement in any direction as compared to 22 degrees on a common heim joint! Johnny Joint(R) rod ends offer cushioning that a heim joint cannot provide via high-density urethane bushings that encase the inner ball. The heat treated center balls are cross-drilled for thru-bolt lubrication and the joint internals are retained with 2 heavy duty, heat treated side washers and a snap ring. This specific joint is a 2 1/2 in. diameter, fitted with a zerk fitting for greasing, 2 1/4 in. of 1 in.-14 right hand threads on the shank, and a 2.625 in. mounting width ball with a .562 in. thru bolt hole. Finished in gold zinc plating.
RockJock Johnny Joint Rod End 2in Forged 2in X .4375in Ball 3/4in-16 LH Thread Shank Ext. Greased
$66.00
RockJocks forged Johnny Joints(R) for fabricators and suspension system builders offer 30 degrees of unrestricted movement in any direction as compared to 22 degrees on a common heim joint! Johnny Joint(R) rod ends offer cushioning that a heim joint cannot provide via high-density urethane bushings that encase the inner ball. The heat treated center balls are cross-drilled for thru-bolt lubrication and the joint internals are retained with 2 heavy duty, heat treated side washers and a snap ring. This specific joint is a 2 in. diameter, fitted with a zerk fitting for greasing, 2 1/4 in. of 3/4 in.-16 left hand threads on the shank, and a 2 in. mounting width ball with a .4375 in. thru bolt hole. Finished in gold zinc plating.
RockJock Johnny Joint Rod End 2in Forged 2in X .4375in Ball 3/4in-16 RH Thread Shank Ext. Greased
$66.00
RockJocks forged Johnny Joints(R) for fabricators and suspension system builders offer 30 degrees of unrestricted movement in any direction as compared to 22 degrees on a common heim joint! Johnny Joint(R) rod ends offer cushioning that a heim joint cannot provide via high-density urethane bushings that encase the inner ball. The heat treated center balls are cross-drilled for thru-bolt lubrication and the joint internals are retained with 2 heavy duty, heat treated side washers and a snap ring. This specific joint is a 2 in. diameter, fitted with a zerk fitting for greasing, 2 1/4 in. of 3/4 in.-16 right hand threads on the shank, and a 2 in. mounting width ball with a .4375 in. thru bolt hole. Finished in gold zinc plating.
RockJock Johnny Joint Rebuild Kit 2in w/ 2 Bushings 2 Side Washers 1 Snap Ring
$23.10
Rebuild kit for the 2 in. RockJock(R) Johnny Joint(R) rod ends includes 2 urethane bushing halves, 2 side washers and 1 snap ring. The CE-9112T Johnny Joint(R) tool makes this rebuild job a lot easier!
RockJock Johnny Joint Rebuild Kit Narrow 2in w/ 1 Bushing 2 Side Washers 1 Snap Ring
$23.10
Rebuild kit for the 2 in. RockJock(R) narrow style Johnny Joint(R) rod ends includes 1 urethane bushing, 2 side washers and 1 snap ring. The CE-9112T Johnny Joint(R) tool makes this rebuild job a lot easier!
RockJock Johnny Joint Rod End 2in Narrow Forged 1.800in X .625in Ball 3/4in-16 LH Thread Shank
$66.00
RockJocks narrow forged Johnny Joints(R) for fabricators and suspension system builders offer 40 degrees of unrestricted movement in any direction as compared to 22 degrees on a common heim joint! Johnny Joint(R) rod ends offer cushioning that a heim joint cannot provide via high-density urethane bushing that encases the inner ball.The heat treated center balls are cross-drilled for thru-bolt lubrication and the joint internals are retained with 2 heavy duty, heat treated side washers and a snap ring. This specific joint is a 2 in. diameter, fitted with a zerk fitting for greasing, 2 1/4 in. of 3/4 in.-16 left hand threads on the shank, and a 1.800 in. mounting width ball with a .625 in. thru bolt hole. Finished in gold zinc plating.
RockJock Johnny Joint Rod End 2in Narrow Forged 1.800in X .625in Ball 3/4in-16 RH Thread Shank
$66.00
RockJocks narrow forged Johnny Joints(R) for fabricators and suspension system builders offer 40 degrees of unrestricted movement in any direction as compared to 22 degrees on a common heim joint! Johnny Joint(R) rod ends offer cushioning that a heim joint cannot provide via high-density urethane bushing that encases the inner ball. The heat treated center balls are cross-drilled for thru-bolt lubrication and the joint internals are retained with 2 heavy duty, heat treated side washers and a snap ring. This specific joint is a 2 in. diameter, fitted with a zerk fitting for greasing, 2 1/4 in. of 3/4 in.-16 right hand threads on the shank, and a 1.800 in. mounting width ball with a .625 in. thru bolt hole. Finished in gold zinc plating.
RockJock Johnny Joint Rod End 2in Narrow Forged 2in X .500in Ball 3/4in-16 RH Thread Shank
$66.00
RockJocks narrow forged Johnny Joints(R) for fabricators and suspension system builders offer 40 degrees of unrestricted movement in any direction as compared to 22 degrees on a common heim joint! Johnny Joint(R) rod ends offer cushioning that a heim joint cannot provide via high-density urethane bushing that encases the inner ball. The heat treated center balls are cross-drilled for thru-bolt lubrication and the joint internals are retained with 2 heavy duty, heat treated side washers and a snap ring. This specific joint is a 2 in. diameter, fitted with a zerk fitting for greasing, 2 1/4 in. of 3/4 in.-16 right hand threads on the shank, and a 2 in. mounting width ball with a .500 in. thru bolt hole. Finished in gold zinc plating.
RockJock Johnny Joint Rod End 2in Machined Press-In 2in X .500in Ball Int. Greased w/ Bolts
$73.00
This is the specially machined Johnny Joint(R) rod end out of our CE-9102K front end housing kit. This joints outer shell is machined to 1.795 in. o.d. with a flanged edge and is designed to be driven into the bushing bore on the gear case casting side of the TJ/LJ/XJ/MJ Dana 30 or 44 frontend housings to replace the stock rubber bushing. Features a 1/2 in. thru bolt hole and includes a 1/2 in. greasable bolt.This Part Fits:
Year
Make
Model
Submodel
1984-1993
Jeep
Cherokee
Base
1991-1992
Jeep
Cherokee
Briarwood
1985-1988
Jeep
Cherokee
Chief
1996,1998-2001
Jeep
Cherokee
Classic
1993-1997
Jeep
Cherokee
Country
1985-1992
Jeep
Cherokee
Laredo
1987-1992,1998-2001
Jeep
Cherokee
Limited
1985-1990
Jeep
Cherokee
Pioneer
1994-2001
Jeep
Cherokee
SE
1989-2001
Jeep
Cherokee
Sport
1998
Jeep
Grand Cherokee
5.9 Limited
1993
Jeep
Grand Cherokee
Base
1993-1998
Jeep
Grand Cherokee
Laredo
1993-1998
Jeep
Grand Cherokee
Limited
1995,1997
Jeep
Grand Cherokee
Orvis
1994-1995
Jeep
Grand Cherokee
SE
1997-1998
Jeep
Grand Cherokee
TSi
2006
Jeep
Wrangler
65th Anniversary Edition
2011
Jeep
Wrangler
70th Anniversary
2016
Jeep
Wrangler
75th Anniversary
2003-2017
Jeep
Wrangler
Rubicon
1997-2004,2007-2017
Jeep
Wrangler
Sahara
1997-2006
Jeep
Wrangler
SE
1997-2006,2010-2017
Jeep
Wrangler
Sport
2016
Jeep
Wrangler
Sport S
2004-2006
Jeep
Wrangler
Unlimited
2011
Jeep
Wrangler
Unlimited 70th Anniversary
2016
Jeep
Wrangler
Unlimited 75th Anniversary
2005-2017
Jeep
Wrangler
Unlimited Rubicon
2007-2017
Jeep
Wrangler
Unlimited Sahara
2010-2017
Jeep
Wrangler
Unlimited Sport
2016
Jeep
Wrangler
Unlimited Sport S
2007-2010
Jeep
Wrangler
Unlimited X
2002-2010
Jeep
Wrangler
X
2018
Jeep
Wrangler JK
Rubicon
2018
Jeep
Wrangler JK
Sahara
2018
Jeep
Wrangler JK
Sport
2018
Jeep
Wrangler JK
Sport S
2018
Jeep
Wrangler JK
Unlimited Rubicon
2018
Jeep
Wrangler JK
Unlimited Sahara
2018
Jeep
Wrangler JK
Unlimited Sport
2018
Jeep
Wrangler JK
Unlimited Sport S
RockJock Johnny Joint Rod End 2in Machined Press-In 2in X .4375in Ball Int. Greased w/ Bolts
$73.00
This is the specially machined Johnny Joint(R) rod end out of our CE-9102K front end housing kit. This joints outer shell is machined to 1.795 in. o.d. with a flanged edge and is designed to be driven into the bushing bore on the gear case casting side of the TJ/LJ/XJ/MJ Dana 30 or 44 frontend housings to replace the stock rubber bushing. Features a 7/16 in. thru bolt hole and includes a 7/16 in. greasable bolt.This Part Fits:
Year
Make
Model
Submodel
1984-1993
Jeep
Cherokee
Base
1991-1992
Jeep
Cherokee
Briarwood
1985-1988
Jeep
Cherokee
Chief
1996,1998-2001
Jeep
Cherokee
Classic
1993-1997
Jeep
Cherokee
Country
1985-1992
Jeep
Cherokee
Laredo
1987-1992,1998-2001
Jeep
Cherokee
Limited
1985-1990
Jeep
Cherokee
Pioneer
1994-2001
Jeep
Cherokee
SE
1989-2001
Jeep
Cherokee
Sport
1998
Jeep
Grand Cherokee
5.9 Limited
1993
Jeep
Grand Cherokee
Base
1993-1998
Jeep
Grand Cherokee
Laredo
1993-1998
Jeep
Grand Cherokee
Limited
1995,1997
Jeep
Grand Cherokee
Orvis
1994-1995
Jeep
Grand Cherokee
SE
1997-1998
Jeep
Grand Cherokee
TSi
2006
Jeep
Wrangler
65th Anniversary Edition
2003-2006
Jeep
Wrangler
Rubicon
1997-2004
Jeep
Wrangler
Sahara
1997-2006
Jeep
Wrangler
SE
1997-2006
Jeep
Wrangler
Sport
2004-2006
Jeep
Wrangler
Unlimited
2005-2006
Jeep
Wrangler
Unlimited Rubicon
2002-2006
Jeep
Wrangler
X
RockJock Johnny Joint Rod End 2in Weld-On 2in X .500in Ball Int. Greased w/ Greasable Bolt
$63.00
RockJocks weld-on Johnny Joints(R) for fabricators and suspension system builders offer 30 degrees of unrestricted movement in any direction as compared to 22 degrees on a common heim joint! Johnny Joint(R) rod ends offer cushioning that a heim joint cannot provide via high-density urethane bushings that encase the inner ball. The heat treated center balls are cross-drilled for thru-bolt lubrication and the joint internals are retained with 2 heavy duty, heat treated side washers and a snap ring. The outer shell is weldable .180 in. wall machined DOM tubing. This specific joint is a 2 in. o.d. and features a 2 in. mounting width and a .500 in. thru bolt hole. Grade 8 greasable bolt with nut and washers included.
RockJock Johnny Joint Rod End 2in Weld-On 2in X .4375in Ball Int. Greased
$63.00
RockJocks weld-on Johnny Joints(R) for fabricators and suspension system builders offer 30 degrees of unrestricted movement in any direction as compared to 22 degrees on a common heim joint! Johnny Joint(R) rod ends offer cushioning that a heim joint cannot provide via high-density urethane bushings that encase the inner ball. The heat treated center balls are cross-drilled for thru-bolt lubrication and the joint internals are retained with 2 heavy duty, heat treated side washers and a snap ring. The outer shell is weldable .180 in. wall machined DOM tubing. This specific joint is a 2 in. o.d. and features a 2 in. mounting width and a .4375 in. thru bolt hole. Grade 8 greasable bolt with nut and washers included.
RockJock Johnny Joint Tool For Use w/ 2 1/2in Johnny Joint Assembly / Disassembly
$150.00
This tool from RockJock is designed to make the assembly and disassembly of our popular 2 ½' Johnny Joint(R) rod ends simple! Tool can be used either in a bench vise, or it can also be used on the vehicle for repairs and rebuilds of Johnny Joints(R). Construction is CNC machined heat treated steel components, ½'-13 all-thread, and premium thrust bearings. Tool is completely rebuildable, and all parts are available through RockJock. Tools sold each.
RockJock Johnny Joint Rebuild Kit 2.5in w/ 2 Bushings 2 Side Washers 1 Snap Ring
$23.10
Rebuild kit for the 2 1/2 in. RockJock(R) Johnny Joint(R) rod ends includes 2 urethane bushing halves, 2 side washers and 1 snap ring. The CE-9110T Johnny Joint(R) tool makes this rebuild job a lot easier!
RockJock Johnny Joint Rod End 2 1/2in Weld-On 2.365in X .562in Ball Ext. Greased
$62.00
RockJocks weld-on Johnny Joints(R) for fabricators and suspension system builders offer 30 degrees of unrestricted movement in any direction as compared to 22 degrees on a common heim joint! Johnny Joint(R) rod ends offer cushioning that a heim joint cannot provide via high-density urethane bushings that encase the inner ball. The heat treated center balls are cross-drilled for thru-bolt lubrication and the joint internals are retained with 2 heavy duty, heat treated side washers and a snap ring. The outer shell is weldable .180 in. wall machined DOM tubing that is fitted with a zerk fitting for greasing. This specific joint is a 2 1/2 in. o.d. and features a 2.365 in. mounting width and a .5625 in. thru bolt hole.
RockJock Johnny Joint Rod End 2 1/2in Weld-On 2.625in X .562in Ball Ext. Greased
$62.00
RockJocks weld-on Johnny Joints(R) for fabricators and suspension system builders offer 30 degrees of unrestricted movement in any direction as compared to 22 degrees on a common heim joint! Johnny Joint(R) rod ends offer cushioning that a heim joint cannot provide via high-density urethane bushings that encase the inner ball. The heat treated center balls are cross-drilled for thru-bolt lubrication and the joint internals are retained with 2 heavy duty, heat treated side washers and a snap ring. The outer shell is weldable .180 in. wall machined DOM tubing that is fitted with a zerk fitting for greasing. This specific joint is a 2 1/2 in. o.d. and features a 2.625 in. mounting width and a .5625 in. thru bolt hole.
RockJock Johnny Joint Rebuild Kit Narrow 2.5in w/ 1 Bushing 2 Side Washers 1 Snap Ring
$23.10
Rebuild kit for the 2 1/2 in. RockJock(R) narrow style Johnny Joint(R) rod ends includes 1 urethane bushing, 2 side washers and 1 snap ring. The CE-9110T Johnny Joint(R) tool makes this rebuild job a lot easier!
RockJock Johnny Joint Rod End 2 1/2in Weld-On 2.625in X .562in Ball Int. Greased
$70.00
RockJocks weld-on Johnny Joints(R) for fabricators and suspension system builders offer 30 degrees of unrestricted movement in any direction as compared to 22 degrees on a common heim joint! Johnny Joint(R) rod ends offer cushioning that a heim joint cannot provide via high-density urethane bushings that encase the inner ball. The heat treated center balls are cross-drilled for thru-bolt lubrication and the joint internals are retained with 2 heavy duty, heat treated side washers and a snap ring. The outer shell is weldable .180 in. wall machined DOM tubing. This specific joint is a 2 1/2 in. o.d. and features a 2.625 in. mounting width and a .5625 in. thru bolt hole. Grade 8 greasable bolt with nut and washers included.