Offering up to 7,500 pounds of load-leveling capacity, the LoadLifter 7500 XL Ultimate kit for the 2023-2025 Ford F-450 4WD from Air Lift will make towing and hauling a comfortable and stress-free experience. Our fully adjustable, industry-leading air springs are the perfect upgrade for your vehicle and work to eliminate any issues you might face when towing and hauling, such as vehicle squat, poor headlight aim, trailer sway, body roll, and bottoming out. While maintaining exclusive features from our other systems, including roll plates for added protection and ultra-high-strength composite formula end caps, what sets the LoadLifter 7500 XL kit apart is a pair of massive 7-inch, double-convoluted bellows air springs. The larger air springs allow for greater leveling abilities at lower air pressures compared to similar systems, keeping your cargo safe and secure while ensuring a more comfortable ride. Installing the kit is simple, requiring only common hand tools and no frame drilling. The LoadLifter 7500 XL Ultimate kit has clear, easy-to-follow instructions and an underframe design that works with most in-bed hitches. As the leader in air suspension products for over 75 years, Air Lift is committed to delivering quality load support products that fit, work, and last. To ensure the highest quality, longevity, and customer satisfaction, the key suspension components, including the air springs and all hardware, have all been torture-tested to 1 million cycles on our hydraulic test rig. With a limited lifetime warranty, a 60-day ride satisfaction guarantee, and a dedicated in-house customer service team, you can purchase this kit with peace of mind. Do not exceed the vehicle’s gross vehicle weight rating (GVWR). Internal jounce bumper absorbs shock and can be safely run with zero PSI.

Offering up to 1,000 pounds of load-leveling capacity, the Air Lift 1000 series kit will make towing and hauling with a Nissan Rogue a breeze. With the added stability that air springs provide, users will have optimal braking and steering control, creating a safe and comfortable experience.WarrantyInstallation InstructionsWarrantyThis Part Fits: Year Make Model Submodel 2023 Nissan Rogue Midnight Edition 2021-2024 Nissan Rogue Platinum 2021-2024 Nissan Rogue S 2021-2024 Nissan Rogue SL 2021-2024 Nissan Rogue SV

For all those who want to influence more than just their ride height. ST XA Coilovers deliver the look you need through a wide range of height adjustment. With an extensively adjustable damper setup, you can precisely adjust the driving behavior of your car to achieve enhanced road control without a compromise in comfort. ST XA Coilover kits deliver precise adjustment to your ride height and look of your car. We manufacture the adjustable spring perch made of durable and friction-optimized polyamide composite material with a stainless steel insert. Thanks to the composite material corrosion is prevented between the strut and perch ensuring long lasting height adjustability while the stainless steel insert provides strength and confidence! ST XA Coilovers come preset to our factory recommended damper settings, the same configuration we test them at on our KW shock dynos before they go into your box. The 16 distinct clicks of adjustable rebound damping allow you to refine the driving dynamics with a simple turn of the adjustment knob. Each kit includes a detailed damper setup manual making it easy to reset to our recommended setting at any time. Whether your preference is comfort, sportiness, or something in between; ST XA puts the finer details of the driving dynamics in your hands. Galvanized zinc coated steel struts optimize corrosion protection for long lasting use. We add a dust protection system to prevent unwanted dirt and particulate from coming in contact with the hardened chrome piston rod or getting into the valve packs. We reinforce the system with a multi-layered pressure resistant sealing package, mono block guide system and a low friction piston band which works inside the pressure resistant internal damper housing.Installation InstructionsThis Part Fits: Year Make Model Submodel 2013-2016 Scion FR-S Base 2013-2020 Subaru BRZ Limited 2013-2019 Subaru BRZ Premium 2015 Subaru BRZ Series.Blue 2019 Subaru BRZ Series.Gray 2016 Subaru BRZ Series.HyperBlue 2017 Subaru BRZ Series.Yellow 2018,2020 Subaru BRZ TS 2017-2020 Toyota 86 Base 2018-2020 Toyota 86 GT 2020 Toyota 86 Hakone Edition 2017 Toyota 86 Special Edition 2019 Toyota 86 TRD Special Edition

The ST X Coilover suspension was developed for the everyday driver who needs to hug the curves yet retain road comfort. Simple, uncomplicated road performance for those who just want to get in and drive. Add in our wide range of height adjustability; the ST X Coilover will look as perfect as it feels. ST XCoilover kits deliver precise adjustment to your ride height and look of your car. We manufacture an adjustable spring perch made of durable and friction-optimized polyamide composite material with a stainless steel insert. Thanks to the composite material corrosion is prevented between the strut and perch ensuring long lasting height adjustability. Galvanized zinc coated steel struts optimize corrosion protection for long lasting use. We add a dust protection system to prevent unwanted dirt and particulate from coming in contact with the hardened chrome piston rod or getting into the valve packs. We reinforce the system with a multi-layered pressure resistant sealing package, mono block guide system and a low friction piston band which works inside the pressure resistant internal damper housing. At ST suspensions we do not accept compromises. As a matter of principle we rely on world class engineering delivered from KW for all our dampers. Why? To simply improve your driving experience! All ST X Coilover kits are application specific for your car and perfectly adapted for everyday life.Installation InstructionsThis Part Fits: Year Make Model Submodel 2017-2018 Mazda 3 Grand Touring 2014-2016 Mazda 3 i Grand Touring 2014-2016 Mazda 3 I Sport 2014-2015 Mazda 3 i SV 2014-2016 Mazda 3 I Touring 2014-2016 Mazda 3 s Grand Touring 2014-2016 Mazda 3 s Touring 2017-2018 Mazda 3 Sport 2017-2018 Mazda 3 Touring

Pedders has played a prominent role in the Australian automotive aftermarket industry 1950. In the summer of 2006 Pedders USA became a reality by selling specialised parts to automotive wholesalers and specialist workshops throughout the U.S. By 2010 Pedders USA had established industry partnerships with GM, Lingenfelter, Richard Petty and Saleen. Pedders has been featured on TV with West Coast Customs and in magazines such as Supercar builder. For each new chassis Pedders USA develops an integrated and engineered suspension solution. There is no fixed formula. Its not an exact science. Our people identify the weaknesses in the OE suspension and develop Pedders components to correct them. We think like OE engineers, but without interference from sales, marketing and finance. We manufacture our Pedders parts to suit the automotive enthusiast and offer a comprehensive range of suspension components for most of the vehicles on the world's roads today, from AMC to Wolseley, with just about everything in between. We started in the USA with the fastest wide-body GTO on a road course. Next the fastest Chrysler 300C. Then Pedders USA's G8 and 5th Generation Camaro. When we moved to Ford, the results with the Saleen Mustang were the same. Our 'supercars' are developmental vehicles with purpose. We upgrade everything to make certain that we are testing at or above the levels of performance our customers will reach. We document every step of our development in enthusiast forums so they can benefit from our hard work. Ride quality is subjective. Our test cars serve as daily drivers. As we do our R & D work in AU and in the USA, the goal is to achieve a Pedders feel: the ideal balance between civility and performance handling. Pedders USA does not build parts for race cars. We make parts for the enthusiast driver that just happen to do extremely well on the race course. A fully Pedderised vehicle feels like a factory hot rod. It is quiet. It is comfortable. It handles.This Part Fits: Year Make Model Submodel 2009-2013 Subaru Forester X 2009-2013 Subaru Forester X Limited 2009-2013 Subaru Forester X Premium 2011-2013 Subaru Forester X Touring 2009 Subaru Forester XT 2009-2010 Subaru Forester XT Limited 2010-2013 Subaru Forester XT Premium 2011-2013 Subaru Forester XT Touring 2009-2010 Subaru Impreza 2.5 GT 2008-2011 Subaru Impreza 2.5i 2010-2011 Subaru Impreza 2.5i Premium 2012-2017 Subaru Impreza Base 2012-2017 Subaru Impreza Limited 2008-2011 Subaru Impreza Outback Sport 2012-2017 Subaru Impreza Premium 2017 Subaru Impreza Sport 2012-2016 Subaru Impreza Sport Limited 2012-2016 Subaru Impreza Sport Premium 2008-2010 Subaru Impreza WRX 2010 Subaru Impreza WRX Limited 2009-2010 Subaru Impreza WRX Premium 2006-2009 Subaru Legacy 2.5i 2007-2009 Subaru Legacy 2.5i Limited 2007-2009 Subaru Legacy 2.5i Special Edition 2009 Subaru Legacy 3.0 R 2008-2009 Subaru Legacy 3.0 R Limited 2004-2006 Subaru Legacy GT 2005,2007-2009 Subaru Legacy GT Limited 2006-2009 Subaru Legacy GT spec.B 2005 Subaru Legacy i 2004 Subaru Legacy L 2004 Subaru Legacy L 35th Anniversary 2005 Subaru Legacy Limited

Pedders has played a prominent role in the Australian automotive aftermarket industry 1950. In the summer of 2006 Pedders USA became a reality by selling specialised parts to automotive wholesalers and specialist workshops throughout the U.S. By 2010 Pedders USA had established industry partnerships with GM, Lingenfelter, Richard Petty and Saleen. Pedders has been featured on TV with West Coast Customs and in magazines such as Supercar builder. For each new chassis Pedders USA develops an integrated and engineered suspension solution. There is no fixed formula. Its not an exact science. Our people identify the weaknesses in the OE suspension and develop Pedders components to correct them. We think like OE engineers, but without interference from sales, marketing and finance. We manufacture our Pedders parts to suit the automotive enthusiast and offer a comprehensive range of suspension components for most of the vehicles on the world's roads today, from AMC to Wolseley, with just about everything in between. We started in the USA with the fastest wide-body GTO on a road course. Next the fastest Chrysler 300C. Then Pedders USA's G8 and 5th Generation Camaro. When we moved to Ford, the results with the Saleen Mustang were the same. Our 'supercars' are developmental vehicles with purpose. We upgrade everything to make certain that we are testing at or above the levels of performance our customers will reach. We document every step of our development in enthusiast forums so they can benefit from our hard work. Ride quality is subjective. Our test cars serve as daily drivers. As we do our R & D work in AU and in the USA, the goal is to achieve a Pedders feel: the ideal balance between civility and performance handling. Pedders USA does not build parts for race cars. We make parts for the enthusiast driver that just happen to do extremely well on the race course. A fully Pedderised vehicle feels like a factory hot rod. It is quiet. It is comfortable. It handles.This Part Fits: Year Make Model Submodel 2009-2013 Subaru Forester X 2009-2013 Subaru Forester X Limited 2009-2013 Subaru Forester X Premium 2011-2013 Subaru Forester X Touring 2009 Subaru Forester XT 2009-2010 Subaru Forester XT Limited 2010-2013 Subaru Forester XT Premium 2011-2013 Subaru Forester XT Touring 2009-2010 Subaru Impreza 2.5 GT 2008-2011 Subaru Impreza 2.5i 2010-2011 Subaru Impreza 2.5i Premium 2012-2017 Subaru Impreza Base 2012-2017 Subaru Impreza Limited 2008-2011 Subaru Impreza Outback Sport 2012-2017 Subaru Impreza Premium 2017 Subaru Impreza Sport 2012-2016 Subaru Impreza Sport Limited 2012-2016 Subaru Impreza Sport Premium 2008-2014 Subaru Impreza WRX 2010-2014 Subaru Impreza WRX Limited 2009-2014 Subaru Impreza WRX Premium 2008-2014 Subaru Impreza WRX STI 2011-2014 Subaru Impreza WRX STI Limited 2010 Subaru Impreza WRX STI Special Edition 2006-2009 Subaru Legacy 2.5i 2007-2009 Subaru Legacy 2.5i Limited 2007-2009 Subaru Legacy 2.5i Special Edition 2009 Subaru Legacy 3.0 R 2008-2009 Subaru Legacy 3.0 R Limited 2004-2006 Subaru Legacy GT 2005,2007-2009 Subaru Legacy GT Limited 2006-2009 Subaru Legacy GT spec.B 2005 Subaru Legacy i 2004 Subaru Legacy L 2004 Subaru Legacy L 35th Anniversary 2005 Subaru Legacy Limited

Pedders has played a prominent role in the Australian automotive aftermarket industry 1950. In the summer of 2006 Pedders USA became a reality by selling specialised parts to automotive wholesalers and specialist workshops throughout the U.S. By 2010 Pedders USA had established industry partnerships with GM, Lingenfelter, Richard Petty and Saleen. Pedders has been featured on TV with West Coast Customs and in magazines such as Supercar builder. For each new chassis Pedders USA develops an integrated and engineered suspension solution. There is no fixed formula. Its not an exact science. Our people identify the weaknesses in the OE suspension and develop Pedders components to correct them. We think like OE engineers, but without interference from sales, marketing and finance. We manufacture our Pedders parts to suit the automotive enthusiast and offer a comprehensive range of suspension components for most of the vehicles on the world's roads today, from AMC to Wolseley, with just about everything in between. We started in the USA with the fastest wide-body GTO on a road course. Next the fastest Chrysler 300C. Then Pedders USA's G8 and 5th Generation Camaro. When we moved to Ford, the results with the Saleen Mustang were the same. Our 'supercars' are developmental vehicles with purpose. We upgrade everything to make certain that we are testing at or above the levels of performance our customers will reach. We document every step of our development in enthusiast forums so they can benefit from our hard work. Ride quality is subjective. Our test cars serve as daily drivers. As we do our R & D work in AU and in the USA, the goal is to achieve a Pedders feel: the ideal balance between civility and performance handling. Pedders USA does not build parts for race cars. We make parts for the enthusiast driver that just happen to do extremely well on the race course. A fully Pedderised vehicle feels like a factory hot rod. It is quiet. It is comfortable. It handles.This Part Fits: Year Make Model Submodel 2013-2016 Scion FR-S Base 2003 Subaru Baja Base 2003-2006 Subaru Baja Sport 2004-2006 Subaru Baja Turbo 2013-2017 Subaru BRZ Limited 2013-2017 Subaru BRZ Premium 2015 Subaru BRZ Series.Blue 2016 Subaru BRZ Series.HyperBlue 1998-2002 Subaru Forester Base 1998-2002 Subaru Forester L 1998-2002 Subaru Forester S 2008 Subaru Forester Sports 2.5 X 2008 Subaru Forester Sports 2.5 XT 2003-2008 Subaru Forester X 2006-2008 Subaru Forester X L.L. Bean Edition 2003-2005 Subaru Forester XS 2005 Subaru Forester XS L.L. Bean Edition 2004-2005 Subaru Forester XT 2006-2008 Subaru Forester XT Limited 2005 Subaru Forester XT Premium 2006-2007 Subaru Impreza 2.5i 1993-1995 Subaru Impreza Base 1996-1997 Subaru Impreza Brighton 1993-2001 Subaru Impreza L 1993-1994 Subaru Impreza LS 1995-1996 Subaru Impreza LX 1995-2004 Subaru Impreza Outback 2005-2007 Subaru Impreza Outback Sport 1998-2005 Subaru Impreza RS 2002-2004 Subaru Impreza TS 2002-2007 Subaru Impreza WRX 2006-2007 Subaru Impreza WRX Limited 2004-2007 Subaru Impreza WRX STI 2007 Subaru Impreza WRX STI Limited 2006-2007 Subaru Impreza WRX TR 1994 Subaru Legacy Alpine Sport 1990,1995 Subaru Legacy Base 1995-2000 Subaru Legacy Brighton 1994,1996-2004 Subaru Legacy GT 1998,2000-2002 Subaru Legacy GT Limited 1990-2004 Subaru Legacy L 1999 Subaru Legacy L 30th Anniversary 2004 Subaru Legacy L 35th Anniversary 2003 Subaru Legacy L SE 1999 Subaru Legacy Limited 30th Anniversary 1990-1996 Subaru Legacy LS 1991-1997 Subaru Legacy LSi 1995-1999 Subaru Legacy Outback 1997,1999 Subaru Legacy Outback Limited 1994 Subaru Legacy Outdoor 1995-1998 Subaru Legacy Postal 1991-1994 Subaru Legacy Sport 1994 Subaru Legacy Sun Sport 1999 Subaru Legacy SUS 30th Anniversary 1994 Subaru Legacy Touring 2000-2004 Subaru Outback Base 2002-2004 Subaru Outback H6 2004 Subaru Outback H6 35th Anniversary Edition 2004 Subaru Outback H6 VDC 2001-2004 Subaru Outback L.L. Bean 2000-2004 Subaru Outback Limited 2001-2003 Subaru Outback VDC 2017-2018 Toyota 86 Base

ICON Vehicle Dynamics Toyota Tacoma suspension systems are designed with maximum performance and the serious driver in mind. ICON engineers’ primary focus is to increase wheel travel and damping ability, which translates into outstanding vehicle control and ride quality both on and off-road. The Stage 7 system includes vehicle-specific tuned 2.5” Extended Travel coilover shocks featuring remote reservoirs equipped with CDCV for exceptional cooling properties and adjustable compression damping as well as ICON-engineered coil springs for superior vehicle “feel” through the range of travel. The ICON CDC Valves are externally adjustable valves that restricts oil flow into the reservoir which creates 10 levels of compression damping force ranges. These coilovers are also height adjustable from 0-3.5” of lift on 2005-2015 or 0-2.75” on 2016-2023 models, allowing the use of larger, more aggressive wheel and tire combinations. The included ICON billet aluminum upper control arm kit is designed to improve the overall performance of the Toyota Tacoma with corrected front-end geometry, increased on-vehicle camber and caster adjustment, and improved suspension component clearance. The included rear Add-A-Leaf Kit Installs in place of the factory overload leaves and effectively lowers the rear spring rate by approximately 10% for a more compliant ride while also providing 1.5" of rear lift over stock. 2.5 Series Omega Bypass rear shocks combine vehicle-specific valving, multiple shock damping zones, and 28 settings of compression and rebound adjustment to give end-users ultimate control of the performance and ride quality of the rear of the Tacoma. The ICON Vehicle Dynamics 2005-2023 Toyota Tacoma Stage 7 suspension system is an excellent choice for those drivers looking to enhance the capabilities of their pickup on the road as well as in the dirt.Installation InstructionsInstallation InstructionsInstallation InstructionsInstallation InstructionsInstallation InstructionsThis Part Fits: Year Make Model Submodel 2005-2015 Toyota Tacoma Base 2016-2023 Toyota Tacoma Limited 2005-2015 Toyota Tacoma Pre Runner 2016-2023 Toyota Tacoma SR 2016-2023 Toyota Tacoma SR5 2021 Toyota Tacoma Trail 2023 Toyota Tacoma Trail Special Edition 2016-2023 Toyota Tacoma TRD Off-Road 2015,2017-2023 Toyota Tacoma TRD Pro 2016-2023 Toyota Tacoma TRD Sport 2005-2013 Toyota Tacoma X-Runner

DBA's 4000 Series XS rotors feature our best technology & materials for maximum performance. High carbon & heat treated iron, patented Kangaroo Paw ventilation and a unique drill & slot pattern makes the perfect direct replacement rotor.This Part Fits: Year Make Model Submodel 2001-2005 Mazda Miata LS 2004-2005 Mazda Miata Mazdaspeed 2001-2003 Mazda Miata SE 2003 Mazda Miata Shinsen

DBA's 4000 Series T3 rotors feature our best technology and materials for maximum performance. High carbon & heat treated iron, patented Kangaroo Paw ventilation and Tri-symmetrical slotting makes for the perfect direct replacement rotorThis Part Fits: Year Make Model Submodel 2001-2005 Mazda Miata LS 2004-2005 Mazda Miata Mazdaspeed 2001-2003 Mazda Miata SE 2003 Mazda Miata Shinsen

DBA's 4000 Series XS rotors feature our best technology & materials for maximum performance. High carbon & heat treated iron, patented Kangaroo Paw ventilation and a unique drill & slot pattern makes the perfect direct replacement rotor.This Part Fits: Year Make Model Submodel 2008 Mazda RX-8 40th Anniversary Edition 2004-2007 Mazda RX-8 Base 2008-2011 Mazda RX-8 Grand Touring 2009-2011 Mazda RX-8 R3 2005 Mazda RX-8 Shinka 2008-2011 Mazda RX-8 Sport 2008-2009 Mazda RX-8 Touring

The included ICON tubular upper control arm kit is designed to improve the overall performance of the Land Cruiser with corrected front-end geometry, built in additional caster, and improved suspension component clearance. Additionally, replacing the OE ball joint with the all-new, serviceable, and rebuildable ICON Delta Joint PRO allows for full bump and droop travel of the front suspension while eliminating bind. The dual-rate rear coil design provides a softer ride height spring rate with a firmer overload rate that combine to deliver on-road comfort with excellent bottoming resistance and superior off-road performance. 2” of rear lift height over stock allows a for level stance front to rear. The ICON Billet Adjustable Rear Track Bar helps re-center the rear axle and double adjuster rod end threads allow easy “on-vehicle” fine adjustment of track bar length without requiring removal or disassembly of the track bar. ICON tubular rear lower links employ dual-durometer greaseless bushings at one end, and massive FK rod ends at the other to provide the best combination of free articulation while isolating and damping road noise and vibrations. ICON 2.5 Aluminum Series remote reservoir rear shocks with integrated bump zones provide improved shock damping ability and utilize a vehicle-specific valving that balances the performance of the truck from front to rear. The ICON Vehicle Dynamics 2024 Toyota Land Cruiser 250 Series Stage 7 suspension system is an excellent choice for those drivers looking to enhance the capabilities of their pickup on the road as well as in the dirt.This Part Fits: Year Make Model Submodel 2024 Toyota Land Cruiser 1958 2024 Toyota Land Cruiser Base 2024 Toyota Land Cruiser First Edition

Rounding out the Stage 3 EXP suspension system are V.S. 2.0 Aluminum Series rear shocks with remote reservoirs specially tailored for the 2005-2023 Tacoma. The 2.0 Aluminum Series shocks are a high-quality upgrade for the everyday street driver and weekend warrior looking for improved on and off-road performance. Their pairing with the ICON 2.5 EXP Series front coilovers results in balanced vehicle control from front to rear and an excellent overall driving experience for your Tacoma.Installation InstructionsInstallation InstructionsInstallation InstructionsInstallation InstructionsInstallation InstructionsThis Part Fits: Year Make Model Submodel 2005-2015 Toyota Tacoma Base 2016-2023 Toyota Tacoma Limited 2005-2015 Toyota Tacoma Pre Runner 2016-2023 Toyota Tacoma SR 2016-2023 Toyota Tacoma SR5 2021 Toyota Tacoma Trail 2023 Toyota Tacoma Trail Special Edition 2016-2023 Toyota Tacoma TRD Off-Road 2016-2023 Toyota Tacoma TRD Sport

The Stage 10 system includes vehicle-specific tuned 2.5 Series Extended Travel coilover shocks featuring a remote reservoir with CDCV for exceptional cooling properties and ICON-engineered coil springs for superior vehicle “feel” through the range of travel. The included ICON CDC Valves are externally adjustable valves that restricts oil flow into the reservoir which creates 10 levels of compression damping force ranges. These coilovers are also height adjustable from 0-3.5” for 2005-2015 models or 0-2.75" for 2016-2023 models, allowing the use of larger, more aggressive wheel and tire combinations. Used in conjunction with the included ICON upper control arm, these extended travel coilovers add increased droop travel to the front suspension. The included ICON billet aluminum upper control arm kit is designed to improve the overall performance of the Toyota Tacoma with corrected front-end geometry, increased on-vehicle camber and caster adjustment, and improved suspension component clearance. To increase the ride quality of the truck and gain additional droop travel, the ICON RXT multi-rate leaf springs are added to the rear. Designed with an additional leaf (included with kit) that can be exchanged or added to the pack to yield an additional 10-20% spring rate, this leaf spring is perfect for drivers seeking improved rear ride quality in an “unloaded” vehicle as well as those that are have outfitted their trucks with a significant amount of weight in the form of a bed rack, roof top tent, spare tires, parts, or other additions.Installation InstructionsInstallation InstructionsInstallation InstructionsInstallation InstructionsInstallation InstructionsInstallation InstructionsInstallation InstructionsThis Part Fits: Year Make Model Submodel 2005-2015 Toyota Tacoma Base 2016-2023 Toyota Tacoma Limited 2005-2015 Toyota Tacoma Pre Runner 2016-2023 Toyota Tacoma SR 2016-2023 Toyota Tacoma SR5 2021 Toyota Tacoma Trail 2023 Toyota Tacoma Trail Special Edition 2016-2023 Toyota Tacoma TRD Off-Road 2015,2017-2023 Toyota Tacoma TRD Pro 2016-2023 Toyota Tacoma TRD Sport 2005-2013 Toyota Tacoma X-Runner

The Stage 9 system includes vehicle-specific tuned 2.5 Series Extended Travel coilover shocks featuring a remote reservoir with CDCV for exceptional cooling properties and ICON-engineered coil springs for superior vehicle “feel” through the range of travel. These coilovers are also height adjustable from 0-3.5” for 2005-2015 models or 0-2.75" for 2016-2023 models, allowing the use of larger, more aggressive wheel and tire combinations. Used in conjunction with the included ICON upper control arm, these extended travel coilovers add increased droop travel to the front suspension. The included ICON billet aluminum upper control arm kit is designed to improve the overall performance of the Toyota Tacoma with corrected front-end geometry, increased on-vehicle camber and caster adjustment, and improved suspension component clearance. To increase the ride quality of the truck and gain additional droop travel, the ICON RXT multi-rate leaf springs are added to the rear. Designed with an additional leaf (included with kit) that can be exchanged or added to the pack to yield an additional 10-20% spring rate, this leaf spring is perfect for drivers seeking improved rear ride quality in an “unloaded” vehicle as well as those that are have outfitted their trucks with a significant amount of weight in the form of a bed rack, roof top tent, spare tires, parts, or other additions. To compliment this increase in rear wheel travel the Stage 9 system includes a unique 2.5 Aluminum Series remote reservoir shock with CDCV that features a side-mount eyelet that making it shorter in collapsed length, longer at extension, and still fits in the factory mounting location. A large ten-inch remote reservoir was added to aid in heat dissipation and resist shock fade during spirited driving. The included ICON CDC Valves are externally adjustable valves that restricts oil flow into the reservoir which creates 10 levels of compression damping force ranges.Installation InstructionsInstallation InstructionsInstallation InstructionsInstallation InstructionsInstallation InstructionsInstallation InstructionsInstallation InstructionsInstallation InstructionsThis Part Fits: Year Make Model Submodel 2005-2015 Toyota Tacoma Base 2016-2023 Toyota Tacoma Limited 2005-2015 Toyota Tacoma Pre Runner 2016-2023 Toyota Tacoma SR 2016-2023 Toyota Tacoma SR5 2021 Toyota Tacoma Trail 2023 Toyota Tacoma Trail Special Edition 2016-2023 Toyota Tacoma TRD Off-Road 2015,2017-2023 Toyota Tacoma TRD Pro 2016-2023 Toyota Tacoma TRD Sport 2005-2013 Toyota Tacoma X-Runner

The Stage 8 system includes vehicle-specific tuned 2.5 Series Extended Travel coilover shocks featuring a remote reservoir for exceptional cooling properties and ICON-engineered coil springs for superior vehicle “feel” through the range of travel. These coilovers are also height adjustable from 0-3.5” for 2005-2015 models or 0-2.75" for 2016-2023 models, allowing the use of larger, more aggressive wheel and tire combinations. Used in conjunction with the included ICON upper control arm, these extended travel coilovers add increased droop travel to the front suspension. The included ICON billet aluminum upper control arm kit is designed to improve the overall performance of the Toyota Tacoma with corrected front-end geometry, increased on-vehicle camber and caster adjustment, and improved suspension component clearance. To increase the ride quality of the truck and gain additional droop travel, the ICON RXT multi-rate leaf springs are added to the rear. Designed with an additional leaf (included with kit) that can be exchanged or added to the pack to yield an additional 10-20% spring rate, this leaf spring is perfect for drivers seeking improved rear ride quality in an “unloaded” vehicle as well as those that are have outfitted their trucks with a significant amount of weight in the form of a bed rack, roof top tent, spare tires, parts, or other additions. To compliment this increase in rear wheel travel the Stage 8 system includes a unique 2.5 Aluminum Series remote reservoir shock that features a side-mount eyelet that making it shorter in collapsed length, longer at extension, and still fits in the factory mounting location. A large ten-inch remote reservoir was added to aid in heat dissipation and resist shock fade during spirited driving.Installation InstructionsInstallation InstructionsInstallation InstructionsInstallation InstructionsInstallation InstructionsInstallation InstructionsInstallation InstructionsInstallation InstructionsThis Part Fits: Year Make Model Submodel 2005-2015 Toyota Tacoma Base 2016-2023 Toyota Tacoma Limited 2005-2015 Toyota Tacoma Pre Runner 2016-2023 Toyota Tacoma SR 2016-2023 Toyota Tacoma SR5 2021 Toyota Tacoma Trail 2023 Toyota Tacoma Trail Special Edition 2016-2023 Toyota Tacoma TRD Off-Road 2015,2017-2023 Toyota Tacoma TRD Pro 2016-2023 Toyota Tacoma TRD Sport 2005-2013 Toyota Tacoma X-Runner

ICON Vehicle Dynamics Toyota Tacoma suspension systems are designed with maximum performance and the serious driver in mind. ICON engineers’ primary focus is to increase wheel travel and damping ability, which translates into outstanding vehicle control and ride quality both on and off-road. The Stage 6 system includes vehicle-specific tuned 2.5” Extended Travel coilover shocks featuring remote reservoirs equipped with CDCV for exceptional cooling properties and adjustable compression damping as well as ICON-engineered coil springs for superior vehicle “feel” through the range of travel. These coilovers are also height adjustable from 0-3.5” of lift on 2005-2015 or 0-2.75” on 2016-2023 models, allowing the use of larger, more aggressive wheel and tire combinations. The included ICON billet aluminum upper control arm kit is designed to improve the overall performance of the Toyota Tacoma with corrected front-end geometry, increased on-vehicle camber and caster adjustment, and improved suspension component clearance. Additionally, replacing the OE ball joint with the serviceable ICON Delta Joint allows for full bump and droop travel of the front suspension while eliminating bind. The included rear Add-A-Leaf Kit Installs in place of the factory overload leaves and effectively lowers the rear spring rate by approximately 10% for a more compliant ride while also providing 1.5" of rear lift over stock. ICON 2.5 Aluminum Series Remote Reservoir rear shocks with CDCV utilize a vehicle-specific valving that balances the performance of the truck from front to rear. The included ICON CDC Valves are externally adjustable valves that restricts oil flow into the reservoir which creates 10 levels of compression damping force ranges. The ICON Vehicle Dynamics 2005-2023 Toyota Tacoma Stage 6 suspension system is an excellent choice for those drivers looking to enhance the capabilities of their pickup on the road as well as in the dirt.Installation InstructionsInstallation InstructionsInstallation InstructionsInstallation InstructionsThis Part Fits: Year Make Model Submodel 2005-2015 Toyota Tacoma Base 2016-2023 Toyota Tacoma Limited 2005-2015 Toyota Tacoma Pre Runner 2016-2023 Toyota Tacoma SR 2016-2023 Toyota Tacoma SR5 2021 Toyota Tacoma Trail 2023 Toyota Tacoma Trail Special Edition 2016-2023 Toyota Tacoma TRD Off-Road 2015,2017-2023 Toyota Tacoma TRD Pro 2016-2023 Toyota Tacoma TRD Sport 2005-2013 Toyota Tacoma X-Runner

ICON Vehicle Dynamics Toyota Tacoma suspension systems are designed with maximum performance and the serious driver in mind. ICON engineers’ primary focus is to increase wheel travel and damping ability, which translates into outstanding vehicle control and ride quality both on and off-road. The Stage 5 system includes vehicle-specific tuned 2.5” Extended Travel coilover shocks featuring remote reservoirs for exceptional cooling properties and ICON-engineered coil springs for superior vehicle “feel” through the range of travel. These coilovers are also height adjustable from 0-3.5” of lift on 2005-2015 or 0-2.75” on 2016-2023 models, allowing the use of larger, more aggressive wheel and tire combinations. When used with an ICON upper control arm, these extended travel coilovers add increased droop travel to the front suspension. The included ICON billet aluminum upper control arm kit is designed to improve the overall performance of the Toyota Tacoma with corrected front-end geometry, increased on-vehicle camber and caster adjustment, and improved suspension component clearance. Additionally, replacing the OE ball joint with the serviceable ICON Delta Joint allows for full bump and droop travel of the front suspension while eliminating bind. The included rear Add-A-Leaf Kit Installs in place of the factory overload leaves and effectively lowers the rear spring rate by approximately 10% for a more compliant ride while also providing 1.5" of rear lift over stock. ICON 2.5 Aluminum Series Remote Reservoir rear shocks utilize a vehicle-specific valving that balances the performance of the truck from front to rear. The ICON Vehicle Dynamics 2005-2023 Toyota Tacoma Stage 5 suspension system is an excellent choice for those drivers looking to enhance the capabilities of their pickup on the road as well as in the dirt.Installation InstructionsInstallation InstructionsInstallation InstructionsInstallation InstructionsInstallation InstructionsThis Part Fits: Year Make Model Submodel 2005-2015 Toyota Tacoma Base 2016-2023 Toyota Tacoma Limited 2005-2015 Toyota Tacoma Pre Runner 2016-2023 Toyota Tacoma SR 2016-2023 Toyota Tacoma SR5 2021 Toyota Tacoma Trail 2023 Toyota Tacoma Trail Special Edition 2016-2023 Toyota Tacoma TRD Off-Road 2015,2017-2023 Toyota Tacoma TRD Pro 2016-2023 Toyota Tacoma TRD Sport 2005-2013 Toyota Tacoma X-Runner

ICON Vehicle Dynamics Toyota Tacoma suspension systems are designed with maximum performance and the serious driver in mind. ICON engineers’ primary focus is to increase wheel travel and damping ability, which translates into outstanding vehicle control and ride quality both on and off-road. The Stage 4 system includes vehicle-specific tuned 2.5” Extended Travel coilover shocks featuring remote reservoirs for exceptional cooling properties and ICON-engineered coil springs for superior vehicle “feel” through the range of travel. These coilovers are also height adjustable from 0-3.5” of lift on 2005-2015 or 0-2.75” on 2016-2023 models, allowing the use of larger, more aggressive wheel and tire combinations. When used with an ICON upper control arm, these extended travel coilovers add increased droop travel to the front suspension. The included ICON billet aluminum upper control arm kit is designed to improve the overall performance of the Toyota Tacoma with corrected front-end geometry, increased on-vehicle camber and caster adjustment, and improved suspension component clearance. Additionally, replacing the OE ball joint with the serviceable ICON Delta Joint allows for full bump and droop travel of the front suspension while eliminating bind. The included rear Add-A-Leaf Kit Installs in place of the factory overload leaves and effectively lowers the rear spring rate by approximately 10% for a more compliant ride while also providing 1.5" of rear lift over stock. ICON 2.0 Aluminum Series Remote Reservoir rear shocks utilize a vehicle-specific valving that balances the performance of the truck from front to rear. The ICON Vehicle Dynamics 2005-2023 Toyota Tacoma Stage 4 suspension system is an excellent choice for those drivers looking to enhance the capabilities of their pickup on the road as well as in the dirt.Installation InstructionsInstallation InstructionsInstallation InstructionsInstallation InstructionsInstallation InstructionsInstallation InstructionsThis Part Fits: Year Make Model Submodel 2005-2015 Toyota Tacoma Base 2016-2023 Toyota Tacoma Limited 2005-2015 Toyota Tacoma Pre Runner 2016-2023 Toyota Tacoma SR 2016-2023 Toyota Tacoma SR5 2021 Toyota Tacoma Trail 2023 Toyota Tacoma Trail Special Edition 2016-2023 Toyota Tacoma TRD Off-Road 2015,2017-2023 Toyota Tacoma TRD Pro 2016-2023 Toyota Tacoma TRD Sport 2005-2013 Toyota Tacoma X-Runner

ICON Vehicle Dynamics Toyota Tacoma suspension systems are designed with maximum performance and the serious driver in mind. ICON engineers’ primary focus is to increase wheel travel and damping ability, which translates into outstanding vehicle control and ride quality both on and off-road. The Stage 3 system includes vehicle-specific tuned 2.5” Extended Travel coilover shocks featuring an internal reservoir for exceptional cooling properties and ICON-engineered coil springs for superior vehicle “feel” through the range of travel. These coilovers are also height adjustable from 0-3.5” of lift on 2005-2015 or 0-2.75” on 2016-2023 models, allowing the use of larger, more aggressive wheel and tire combinations. When used with an ICON upper control arm, these extended travel coilovers add increased droop travel to the front suspension. The included ICON billet aluminum upper control arm kit is designed to improve the overall performance of the Toyota Tacoma with corrected front-end geometry, increased on-vehicle camber and caster adjustment, and improved suspension component clearance. Additionally, replacing the OE ball joint with the serviceable ICON Delta Joint allows for full bump and droop travel of the front suspension while eliminating bind. The included rear Add-A-Leaf Kit Installs in place of the factory overload leaves and effectively lowers the rear spring rate by approximately 10% for a more compliant ride while also providing 1.5" of rear lift over stock. ICON 2.0 Aluminum Series Remote Reservoir rear shocks utilize a vehicle-specific valving that balances the performance of the truck from front to rear. The ICON Vehicle Dynamics 2005-2023 Toyota Tacoma Stage 3 suspension system is an excellent choice for those drivers looking to enhance the capabilities of their pickup on the road as well as in the dirt.Installation InstructionsInstallation InstructionsInstallation InstructionsInstallation InstructionsInstallation InstructionsInstallation InstructionsThis Part Fits: Year Make Model Submodel 2005-2015 Toyota Tacoma Base 2016-2023 Toyota Tacoma Limited 2005-2015 Toyota Tacoma Pre Runner 2016-2023 Toyota Tacoma SR 2016-2023 Toyota Tacoma SR5 2021 Toyota Tacoma Trail 2023 Toyota Tacoma Trail Special Edition 2016-2023 Toyota Tacoma TRD Off-Road 2015,2017-2023 Toyota Tacoma TRD Pro 2016-2023 Toyota Tacoma TRD Sport 2005-2013 Toyota Tacoma X-Runner

Firestone's original helper spring kit is designed to level loads when you are hauling or towing to eliminate squat and return the vehicle designed ride height. Paired with a single path analog compressor kit and no drill mounting plate. A true All In One kit with everything you need in one box for a quick and easy install.This Part Fits: Year Make Model Submodel 2013-2024 Ram 3500 Big Horn 2013-2024 Ram 3500 Laramie 2014-2015 Ram 3500 Laramie Limited 2013-2020 Ram 3500 Laramie Longhorn 2016-2024 Ram 3500 Limited 2021-2024 Ram 3500 Limited Longhorn 2013-2015,2017,2019-2022 Ram 3500 Lone Star 2013-2024 Ram 3500 SLT 2024 Ram 3500 Special Service 2013 Ram 3500 ST 2013-2024 Ram 3500 Tradesman

For all those who want to influence more than just their ride height. ST XA Coilovers deliver the look you need through a wide range of height adjustment. With an extensively adjustable damper setup, you can precisely adjust the driving behavior of your car to achieve enhanced road control without a compromise in comfort. ST XA Coilover kits deliver precise adjustment to your ride height and look of your car. We manufacture the adjustable spring perch made of durable and friction-optimized polyamide composite material with a stainless steel insert. Thanks to the composite material corrosion is prevented between the strut and perch ensuring long lasting height adjustability while the stainless steel insert provides strength and confidence! ST XA Coilovers come preset to our factory recommended damper settings, the same configuration we test them at on our KW shock dynos before they go into your box. The 16 distinct clicks of adjustable rebound damping allow you to refine the driving dynamics with a simple turn of the adjustment knob. Each kit includes a detailed damper setup manual making it easy to reset to our recommended setting at any time. Whether your preference is comfort, sportiness, or something in between; ST XA puts the finer details of the driving dynamics in your hands. Galvanized zinc coated steel struts optimize corrosion protection for long lasting use. We add a dust protection system to prevent unwanted dirt and particulate from coming in contact with the hardened chrome piston rod or getting into the valve packs. We reinforce the system with a multi-layered pressure resistant sealing package, mono block guide system and a low friction piston band which works inside the pressure resistant internal damper housing.Installation InstructionsThis Part Fits: Year Make Model Submodel 1992-1998 BMW 318i Base 1992-1997 BMW 318is Base 1998 BMW 323i Base 1998 BMW 323is Base 1992-1995 BMW 325i Base 1992-1995 BMW 325is Base 1996-1998 BMW 328i Base 1996-1998 BMW 328is Base

Offering up to 3,400 lbs. of load-leveling capacity, the LoadLifter kit with Universal Air Spring Cradles for the 2020-2025 Jeep Gladiator 4WD from Air Lift makes towing and hauling comfortable and stress-free. Our fully adjustable, industry-leading air springs are the perfect partner for your vehicle. The kit also includes Air Spring Cradles, allowing the air springs to detach from the lower bracket for full suspension extension, ideal for overlanding and off-roading. The LoadLifter kit helps eliminate problems frequently encountered when towing and hauling, such as squat, trailer sway, body roll, and bottoming out. With the added stability and weight distribution that air springs provide, you can haul safely with optimal braking and steering control. It is engineered to provide years of exceptional suspension support without potential concerns about damage to the frame or other components. As the leader in air suspension products for over 75 years, Air Lift is committed to delivering quality load support parts that last. The key suspension components have all been torture-tested to ensure the highest quality, longevity, and customer satisfaction. Backed by a lifetime warranty and a 60-day ride satisfaction guarantee.This Part Fits: Year Make Model Submodel 2021 Jeep Gladiator 80th Anniversary 2020,2022 Jeep Gladiator Altitude 2023 Jeep Gladiator Freedom 2021-2023 Jeep Gladiator High Altitude 2020 Jeep Gladiator Launch Edition 2020-2024 Jeep Gladiator Mojave 2024 Jeep Gladiator Mojave X 2020-2023 Jeep Gladiator Overland 2020-2024 Jeep Gladiator Rubicon 2024 Jeep Gladiator Rubicon X 2020-2024 Jeep Gladiator Sport 2020-2024 Jeep Gladiator Sport S 2021-2023 Jeep Gladiator Texas Trail 2021-2024 Jeep Gladiator Willys 2021-2023 Jeep Gladiator Willys Sport

Synergy 2003-2013 Dodge Ram 1500 / 2500 / 3500 Heavy Duty Steering Kit

Synergy Tuned Fox IFP Universal Steering Stabilizer

Looking to improve the handling of your vehicle? Our ST Anti-sway Bars are the ideal solution. By upgrading the anti-sway bars you reduce the amount of body roll and ensure improved handling while providing better traction. ST Anti-sway Bars improve the driving dynamics of your vehicle and complete your suspension upgrade. Our ST Anti-sway Bars are made of cold-formed heavy duty aircraft steel. The reduction in the wheel load differential between the outer and inner wheel in a curve will be immediately noticeable. Depending on the vehicle, some of our ST Anti-sway Bars are adjustable to give you the freedom to fine tune the force and further improve your vehicle's lateral stability and cornering grip. Our high performance ST Anti-sway Bars go through multiple quenching and tempering processes along with a final epoxy coating to maximize the protection from extreme weather and road debris. Not only do they look good, they are also built to last.Installation InstructionsThis Part Fits: Year Make Model Submodel 1995-1999 Volkswagen Cabrio Base 1998,2000-2002 Volkswagen Cabrio GL 1998-2002 Volkswagen Cabrio GLS 2001-2002 Volkswagen Cabrio GLX 1997 Volkswagen Cabrio High Line 1990-1992 Volkswagen Corrado G60 1992-1994 Volkswagen Corrado SLC 1985-1986,1988-1989 Volkswagen Golf Base 1995 Volkswagen Golf Celebration Edition 1995 Volkswagen Golf City 1987-1998 Volkswagen Golf GL 1987-1988 Volkswagen Golf GT 1985-1987,1994,1996-1998 Volkswagen Golf GTI 1987-1992 Volkswagen Golf GTI 16-Valve 1990-1992 Volkswagen Golf GTI 8-Valve 1995-1998 Volkswagen Golf GTI VR6 1997 Volkswagen Golf Jazz 1997-1998 Volkswagen Golf K2 1994 Volkswagen Golf Limited Edition 1995 Volkswagen Golf Sport 1997 Volkswagen Golf Trek 1985-1989 Volkswagen Jetta Base 1988-1992 Volkswagen Jetta Carat 1995 Volkswagen Jetta Celebration Edition 1995 Volkswagen Jetta City 1985-1998 Volkswagen Jetta GL 1985-1987 Volkswagen Jetta GLI 1987-1992 Volkswagen Jetta GLI 16-Valve 1994-1998 Volkswagen Jetta GLS 1994-1998 Volkswagen Jetta GLX 1997-1998 Volkswagen Jetta GT 1997 Volkswagen Jetta Jazz 1998 Volkswagen Jetta K2 1994 Volkswagen Jetta Limited Edition 1997-1998 Volkswagen Jetta TDI 1996 Volkswagen Jetta Trek 1987,1996,1998 Volkswagen Jetta Wolfsburg Edition

Looking to improve the handling of your vehicle? Our ST Anti-sway Bars are the ideal solution. By upgrading the anti-sway bars you reduce the amount of body roll and ensure improved handling while providing better traction. ST Anti-sway Bars improve the driving dynamics of your vehicle and complete your suspension upgrade. Our ST Anti-sway Bars are made of cold-formed heavy duty aircraft steel. The reduction in the wheel load differential between the outer and inner wheel in a curve will be immediately noticeable. Depending on the vehicle, some of our ST Anti-sway Bars are adjustable to give you the freedom to fine tune the force and further improve your vehicle's lateral stability and cornering grip. Our high performance ST Anti-sway Bars go through multiple quenching and tempering processes along with a final epoxy coating to maximize the protection from extreme weather and road debris. Not only do they look good, they are also built to last.Installation InstructionsThis Part Fits: Year Make Model Submodel 1995-1999 Volkswagen Cabrio Base 1998,2000-2002 Volkswagen Cabrio GL 1998-2002 Volkswagen Cabrio GLS 2001-2002 Volkswagen Cabrio GLX 1997 Volkswagen Cabrio High Line 1990-1992 Volkswagen Corrado G60 1992-1994 Volkswagen Corrado SLC 1985-1986,1988-1989 Volkswagen Golf Base 1995 Volkswagen Golf Celebration Edition 1995 Volkswagen Golf City 1987-1998 Volkswagen Golf GL 1987-1988 Volkswagen Golf GT 1985-1987,1994,1996-1998 Volkswagen Golf GTI 1987-1992 Volkswagen Golf GTI 16-Valve 1990-1992 Volkswagen Golf GTI 8-Valve 1995-1998 Volkswagen Golf GTI VR6 1997 Volkswagen Golf Jazz 1997-1998 Volkswagen Golf K2 1994 Volkswagen Golf Limited Edition 1995 Volkswagen Golf Sport 1997 Volkswagen Golf Trek 1985-1989 Volkswagen Jetta Base 1988-1992 Volkswagen Jetta Carat 1995 Volkswagen Jetta Celebration Edition 1995 Volkswagen Jetta City 1985-1998 Volkswagen Jetta GL 1985-1987 Volkswagen Jetta GLI 1987-1992 Volkswagen Jetta GLI 16-Valve 1994-1998 Volkswagen Jetta GLS 1994-1998 Volkswagen Jetta GLX 1997-1998 Volkswagen Jetta GT 1997 Volkswagen Jetta Jazz 1998 Volkswagen Jetta K2 1994 Volkswagen Jetta Limited Edition 1997-1998 Volkswagen Jetta TDI 1996 Volkswagen Jetta Trek 1987,1996,1998 Volkswagen Jetta Wolfsburg Edition

Pedders has played a prominent role in the Australian automotive aftermarket industry 1950. In the summer of 2006 Pedders USA became a reality by selling specialised parts to automotive wholesalers and specialist workshops throughout the U.S. By 2010 Pedders USA had established industry partnerships with GM, Lingenfelter, Richard Petty and Saleen. Pedders has been featured on TV with West Coast Customs and in magazines such as Supercar builder. For each new chassis Pedders USA develops an integrated and engineered suspension solution. There is no fixed formula. Its not an exact science. Our people identify the weaknesses in the OE suspension and develop Pedders components to correct them. We think like OE engineers, but without interference from sales, marketing and finance. We manufacture our Pedders parts to suit the automotive enthusiast and offer a comprehensive range of suspension components for most of the vehicles on the world's roads today, from AMC to Wolseley, with just about everything in between. We started in the USA with the fastest wide-body GTO on a road course. Next the fastest Chrysler 300C. Then Pedders USA's G8 and 5th Generation Camaro. When we moved to Ford, the results with the Saleen Mustang were the same. Our 'supercars' are developmental vehicles with purpose. We upgrade everything to make certain that we are testing at or above the levels of performance our customers will reach. We document every step of our development in enthusiast forums so they can benefit from our hard work. Ride quality is subjective. Our test cars serve as daily drivers. As we do our R & D work in AU and in the USA, the goal is to achieve a Pedders feel: the ideal balance between civility and performance handling. Pedders USA does not build parts for race cars. We make parts for the enthusiast driver that just happen to do extremely well on the race course. A fully Pedderised vehicle feels like a factory hot rod. It is quiet. It is comfortable. It handles.This Part Fits: Year Make Model Submodel 1964-1973 Ford Mustang Base 1969,1971 Ford Mustang Boss 302 1971 Ford Mustang Boss 351 1969-1970 Ford Mustang Boss 429 1970-1973 Ford Mustang Grande 1966-1968,1970 Ford Mustang Shelby GT-350 1966 Ford Mustang Shelby GT-350H 1967,1969-1970 Ford Mustang Shelby GT-500 1968 Ford Mustang Shelby GT-500KR

Pedders has played a prominent role in the Australian automotive aftermarket industry 1950. In the summer of 2006 Pedders USA became a reality by selling specialised parts to automotive wholesalers and specialist workshops throughout the U.S. By 2010 Pedders USA had established industry partnerships with GM, Lingenfelter, Richard Petty and Saleen. Pedders has been featured on TV with West Coast Customs and in magazines such as Supercar builder. For each new chassis Pedders USA develops an integrated and engineered suspension solution. There is no fixed formula. Its not an exact science. Our people identify the weaknesses in the OE suspension and develop Pedders components to correct them. We think like OE engineers, but without interference from sales, marketing and finance. We manufacture our Pedders parts to suit the automotive enthusiast and offer a comprehensive range of suspension components for most of the vehicles on the world's roads today, from AMC to Wolseley, with just about everything in between. We started in the USA with the fastest wide-body GTO on a road course. Next the fastest Chrysler 300C. Then Pedders USA's G8 and 5th Generation Camaro. When we moved to Ford, the results with the Saleen Mustang were the same. Our 'supercars' are developmental vehicles with purpose. We upgrade everything to make certain that we are testing at or above the levels of performance our customers will reach. We document every step of our development in enthusiast forums so they can benefit from our hard work. Ride quality is subjective. Our test cars serve as daily drivers. As we do our R & D work in AU and in the USA, the goal is to achieve a Pedders feel: the ideal balance between civility and performance handling. Pedders USA does not build parts for race cars. We make parts for the enthusiast driver that just happen to do extremely well on the race course. A fully Pedderised vehicle feels like a factory hot rod. It is quiet. It is comfortable. It handles.This Part Fits: Year Make Model Submodel 1971-1973 Ford Mustang Base 1971 Ford Mustang Boss 302 1971-1972 Ford Mustang Boss 351 1971-1973 Ford Mustang Grande

Firestone 07-21 Toyota Tundra AIO Analog Ride-Rite All-In-One Kit w/ Mounting Plate (W217602871)This Part Fits: Year Make Model Submodel 2014-2021 Toyota Tundra 1794 Edition 2007-2013 Toyota Tundra Base 2007-2021 Toyota Tundra Limited 2021 Toyota Tundra Nightshade 2010-2021 Toyota Tundra Platinum 2014-2021 Toyota Tundra SR 2007-2011,2014-2021 Toyota Tundra SR5 2021 Toyota Tundra Trail 2015-2017,2019-2021 Toyota Tundra TRD Pro

Made of Energy's Hyper-Flex performance polyurethane for optimum performance and durability. Maintains proper alignment under extreme conditions on the street, track or off-road. Improves vehicle handling, cornering and overall control. Full floating for smoother, efficient operation. Outlasts and outperforms rubber.

Bilstein B14 (PSS) suspension kits feature ride height adjustability in an OE quality, direct fit package. These kits offer monotube performance dampers with matched springs that are tuned for each specific application. The zinc coated and threaded body design will give you the flexibility to find the perfect ride height setting for your intended use while providing unsurpassed protection against the harshest road elements. B14 (PSS) suspension kits are made in Germany and feature technology tested on the famed Nürburgring.Installation InstructionsWarrantyMaterial Safety Data SheetMaterial Safety Data SheetInstallation InstructionsWarrantyThis Part Fits: Year Make Model Submodel 1997-2003 BMW 540i Base 2000-2003 BMW M5 Base

The 461-401001-A aFe Control PFADT Series Spherical Rebuild offers the components to rebuild 1 PFADT series front upper control arm spherical bushing kit, for the 1997-2013 Chevrolet Corvette (C5/C6). If you would like to rebuild 2 front upper control arms, you will need to order 2 kits.This Part Fits: Year Make Model Submodel 2013 Chevrolet Corvette 427 2008 Chevrolet Corvette 427 Limited Edition Z06 2003 Chevrolet Corvette 50th Anniversary Edition 2003 Chevrolet Corvette 50th Anniversary Edition Pace Car 1997-2013 Chevrolet Corvette Base 2010-2013 Chevrolet Corvette Grand Sport 1998 Chevrolet Corvette Indianapolis 500 Pace Car 2001-2004,2006-2013 Chevrolet Corvette Z06 2011 Chevrolet Corvette Z06 Carbon 2009-2013 Chevrolet Corvette ZR1

BMR 16-24 Chevrolet Camaro 15in Conversion Kit w/ Solid Rotors & Red Calipers

A must for proper alignments. This tool securely holds the steering wheel and it's covered hooks & base prevent damage to the steering wheel and seat.----------------------------- CAUTION: This product is not a locking device. Use only according to directions packaged with product. California Residents WARNINGInstallation Instructions

Stop damaging steering knuckles by removing linkages or struts with pry bars, screwdrivers and hammers. Use the Steering Knuckle Spreader Tool to make quick work of tight and corroded steering knuckles by simply turning the threaded wedge assembly. Thisis a must for any technicain performing suspension work, especially for those who see the Ford Taurus or BMW passenger cars. Blow molded case included. California Residents WARNINGInstallation Instructions