RockJock Johnny Joint Rod End 2in Narrow Forged 1.750in X .500in Ball 3/4in-16 RH Thread Shank
$66.00
RockJocks narrow forged Johnny Joints(R) for fabricators and suspension system builders offer 40 degrees of unrestricted movement in any direction as compared to 22 degrees on a common heim joint! Johnny Joint(R) rod ends offer cushioning that a heim joint cannot provide via high-density urethane bushing that encases the inner ball. The heat treated center balls are cross-drilled for thru-bolt lubrication and the joint internals are retained with 2 heavy duty, heat treated side washers and a snap ring. This specific joint is a 2 in. diameter, fitted with a zerk fitting for greasing, 2 1/4 in. of 3/4 in.-16 right hand threads on the shank, and a 1.750 in. mounting width ball with a .500 in. thru bolt hole. Finished in gold zinc plating.
RockJock Johnny Joint Rod End 2in Narrow Forged 1.600in X .510in Ball 3/4in-16 RH Thread Shank
$66.00
RockJocks narrow forged Johnny Joints(R) for fabricators and suspension system builders offer 40 degrees of unrestricted movement in any direction as compared to 22 degrees on a common heim joint! Johnny Joint(R) rod ends offer cushioning that a heim joint cannot provide via high-density urethane bushing that encases the inner ball. The heat treated center balls are cross-drilled for thru-bolt lubrication and the joint internals are retained with 2 heavy duty, heat treated side washers and a snap ring. This specific joint is a 2 in. diameter, fitted with a zerk fitting for greasing, 2 1/4 in. of 3/4 in.-16 right hand threads on the shank, and a 1.600 in. mounting width ball with a .510 in. thru bolt hole. Finished in gold zinc plating.
RockJock Johnny Joint Rod End 2in Narrow Forged 1.600in X .625in Ball 3/4in-16 RH Thread Shank
$66.00
RockJocks narrow forged Johnny Joints(R) for fabricators and suspension system builders offer 40 degrees of unrestricted movement in any direction as compared to 22 degrees on a common heim joint! Johnny Joint(R) rod ends offer cushioning that a heim joint cannot provide via high-density urethane bushing that encases the inner ball. The heat treated center balls are cross-drilled for thru-bolt lubrication and the joint internals are retained with 2 heavy duty, heat treated side washers and a snap ring. This specific joint is a 2 in. diameter, fitted with a zerk fitting for greasing, 2 1/4 in. of 3/4 in.-16 right hand threads on the shank, and a 1.600 in. mounting width ball with a .625 in. thru bolt hole. Finished in gold zinc plating.
RockJock Johnny Joint Rod End 2in Narrow Forged 1.600in X .562in Ball 3/4in-16 RH Thread Shank
$66.00
RockJocks narrow forged Johnny Joints(R) for fabricators and suspension system builders offer 40 degrees of unrestricted movement in any direction as compared to 22 degrees on a common heim joint! Johnny Joint(R) rod ends offer cushioning that a heim joint cannot provide via high-density urethane bushing that encases the inner ball. The heat treated center balls are cross-drilled for thru-bolt lubrication and the joint internals are retained with 2 heavy duty, heat treated side washers and a snap ring. This specific joint is a 2 in. diameter, fitted with a zerk fitting for greasing, 2 1/4 in. of 3/4 in.-16 right hand threads on the shank, and a 1.600 in. mounting width ball with a .562 in. thru bolt hole. Finished in gold zinc plating.
RockJock Johnny Joint Rod End 2in Forged 1.850in X .562in Ball 1in-14 RH Thread Shank Ext. Greased
$66.00
RockJocks narrow forged Johnny Joints(R) for fabricators and suspension system builders offer 40 degrees of unrestricted movement in any direction as compared to 22 degrees on a common heim joint! Johnny Joint(R) rod ends offer cushioning that a heim joint cannot provide via high-density urethane bushing that encases the inner ball. The heat treated center balls are cross-drilled for thru-bolt lubrication and the joint internals are retained with 2 heavy duty, heat treated side washers and a snap ring. This specific joint is a 2 in. diameter, fitted with a zerk fitting for greasing, 2 1/4 in. of 1 in.-14 right hand threads on the shank, and a 1.850 in. mounting width ball with a .562 in. thru bolt hole. Finished in gold zinc plating.
RockJock Johnny Joint Rod End 2in Forged 1.615in X .718in Ball 1in-14 RH Thread Shank Ext. Greased
$66.00
RockJocks narrow forged Johnny Joints(R) for fabricators and suspension system builders offer 40 degrees of unrestricted movement in any direction as compared to 22 degrees on a common heim joint! Johnny Joint(R) rod ends offer cushioning that a heim joint cannot provide via high-density urethane bushing that encases the inner ball. The heat treated center balls are cross-drilled for thru-bolt lubrication and the joint internals are retained with 2 heavy duty, heat treated side washers and a snap ring. This specific joint is a 2 in. diameter, fitted with a zerk fitting for greasing, 2 1/4 in. of 1 in.-14 right hand threads on the shank, and a 1.615 in. mounting width ball with a .718 in. thru bolt hole. Finished in gold zinc plating.
RockJock Johnny Joint Rod End 2in Forged 1.750in X .500in Ball 1in-14 RH Thread Shank Ext. Greased
$66.00
RockJocks narrow forged Johnny Joints(R) for fabricators and suspension system builders offer 40 degrees of unrestricted movement in any direction as compared to 22 degrees on a common heim joint! Johnny Joint(R) rod ends offer cushioning that a heim joint cannot provide via high-density urethane bushing that encases the inner ball. The heat treated center balls are cross-drilled for thru-bolt lubrication and the joint internals are retained with 2 heavy duty, heat treated side washers and a snap ring. This specific joint is a 2 in. diameter, fitted with a zerk fitting for greasing, 2 1/4 in. of 1 in.-14 right hand threads on the shank, and a 1.750 in. mounting width ball with a .500 in. thru bolt hole. Finished in gold zinc plating.
RockJock Johnny Joint Rod End 2in Forged 1.800in X .625in Ball 1in-14 RH Thread Shank Ext. Greased
$66.00
RockJocks narrow forged Johnny Joints(R) for fabricators and suspension system builders offer 40 degrees of unrestricted movement in any direction as compared to 22 degrees on a common heim joint! Johnny Joint(R) rod ends offer cushioning that a heim joint cannot provide via high-density urethane bushing that encases the inner ball. The heat treated center balls are cross-drilled for thru-bolt lubrication and the joint internals are retained with 2 heavy duty, heat treated side washers and a snap ring. This specific joint is a 2 in. diameter, fitted with a zerk fitting for greasing, 2 1/4 in. of 1 in.-14 right hand threads on the shank, and a 1.800 in. mounting width ball with a .625 in. thru bolt hole. Finished in gold zinc plating.
RockJock Johnny Joint Rod End 2in Forged 1.600in X .480in Ball 1in-14 RH Thread Shank Ext. Greased
$66.00
RockJocks narrow forged Johnny Joints(R) for fabricators and suspension system builders offer 40 degrees of unrestricted movement in any direction as compared to 22 degrees on a common heim joint! Johnny Joint(R) rod ends offer cushioning that a heim joint cannot provide via high-density urethane bushing that encases the inner ball. The heat treated center balls are cross-drilled for thru-bolt lubrication and the joint internals are retained with 2 heavy duty, heat treated side washers and a snap ring. This specific joint is a 2 in. diameter, fitted with a zerk fitting for greasing, 2 1/4 in. of 1 in.-14 right hand threads on the shank, and a 1.600 in. mounting width ball with a .480 in. thru bolt hole. Finished in gold zinc plating.
RockJock Johnny Joint Rod End 2in Forged 1.600in X .625in Ball 1in-14 RH Thread Shank Ext. Greased
$66.00
RockJocks narrow forged Johnny Joints(R) for fabricators and suspension system builders offer 40 degrees of unrestricted movement in any direction as compared to 22 degrees on a common heim joint! Johnny Joint(R) rod ends offer cushioning that a heim joint cannot provide via high-density urethane bushing that encases the inner ball. The heat treated center balls are cross-drilled for thru-bolt lubrication and the joint internals are retained with 2 heavy duty, heat treated side washers and a snap ring. This specific joint is a 2 in. diameter, fitted with a zerk fitting for greasing, 2 1/4 in. of 1 in.-14 right hand threads on the shank, and a 1.600 in. mounting width ball with a .625 in. thru bolt hole. Finished in gold zinc plating.
RockJock Johnny Joint Rod End 2in Forged 1.600in X .562in Ball 1in-14 RH Thread Shank Ext. Greased
$66.00
RockJocks narrow forged Johnny Joints(R) for fabricators and suspension system builders offer 40 degrees of unrestricted movement in any direction as compared to 22 degrees on a common heim joint! Johnny Joint(R) rod ends offer cushioning that a heim joint cannot provide via high-density urethane bushing that encases the inner ball. The heat treated center balls are cross-drilled for thru-bolt lubrication and the joint internals are retained with 2 heavy duty, heat treated side washers and a snap ring. This specific joint is a 2 in. diameter, fitted with a zerk fitting for greasing, 2 1/4 in. of 1 in.-14 right hand threads on the shank, and a 1.600 in. mounting width ball with a .562 in. thru bolt hole. Finished in gold zinc plating.
RockJock Johnny Joint Rod End 2in Narrow Forged 2in X .500in Ball 1in-14 RH Thread Shank
$66.00
RockJocks narrow forged Johnny Joints(R) for fabricators and suspension system builders offer 40 degrees of unrestricted movement in any direction as compared to 22 degrees on a common heim joint! Johnny Joint(R) rod ends offer cushioning that a heim joint cannot provide via high-density urethane bushing that encases the inner ball. The heat treated center balls are cross-drilled for thru-bolt lubrication and the joint internals are retained with 2 heavy duty, heat treated side washers and a snap ring. This specific joint is a 2 in. diameter, fitted with a zerk fitting for greasing, 2 1/4 in. of 1 in.-14 right hand threads on the shank, and a 2 in. mounting width ball with a .500 in. thru bolt hole. Finished in gold zinc plating.
RockJock Johnny Joint Rod End 2in Narrow Forged 2.190in X 0.482in Ball 1in-14 RH Threaded Shank
$66.00
RockJocks narrow forged Johnny Joints(R) for fabricators and suspension system builders offer 40 degrees of unrestricted movement in any direction as compared to 22 degrees on a common heim joint! Johnny Joint(R) rod ends offer cushioning that a heim joint cannot provide via high-density urethane bushing that encases the inner ball. The heat treated center balls are cross-drilled for thru-bolt lubrication and the joint internals are retained with 2 heavy duty, heat treated side washers and a snap ring. This specific joint is a 2 in. diameter, fitted with a zerk fitting for greasing, 2 1/4 in. of 1 in.-14 right hand threads on the shank, and a 2.190 in. mounting width ball with a .482 in. thru bolt hole. Finished in gold zinc plating.
RockJock Johnny Joint Rebuild Kit 3in w/ 2 Bushings 2 Side Washers 1 Snap Ring
$66.00
Rebuild kit for the 3 in. RockJock(R) Johnny Joint(R) rod ends includes 2 urethane bushing halves, 2 side washers and 1 snap ring. The CE-9111T Johnny Joint(R) tool makes this rebuild job a lot easier!
RockJock Johnny Joint Rebuild Kit Narrow Weld-On 3in w/ 1 Bushing 2 Side Washer 1 Snap Ring
$66.00
RockJock's rebuild kit for the 3 in. narrow style Johnny Joint weld-on rod ends includes 1 urethane bushing, 2 side washers and 1 snap ring. The CE-9111T Johnny Joint tool makes this rebuild job a lot easier!
RockJock Johnny Joint Rod End 2 1/2in Weld-On 2.625in X .640in Ball Ext. Greased
$62.00
RockJock's weld-on Johnny Joints(R) for fabricators and suspension system builders offer 30 degrees of unrestricted movement in any direction as compared to 22 degrees on a common heim joint! Johnny Joint(R) rod ends offer cushioning that a heim joint cannot provide via high-density urethane bushings that encase the inner ball. The heat treated center balls are cross-drilled for thru-bolt lubrication and the joint internals are retained with 2 heavy duty, heat treated side washers and a snap ring. The outer shell is weldable .180 in. wall machined DOM tubing that is fitted with a zerk fitting for greasing. This specific joint is a 2 1/2 in. o.d. and features a 2.625 in. mounting width and a .640 in. thru bolt hole.
RockJock Johnny Joint Rod End 2 1/2in Weld-On 2.812in X .750in Ball Ext. Greased
$62.00
RockJocks weld-on Johnny Joints(R) for fabricators and suspension system builders offer 30 degrees of unrestricted movement in any direction as compared to 22 degrees on a common heim joint! Johnny Joint(R) rod ends offer cushioning that a heim joint cannot provide via high-density urethane bushings that encase the inner ball. The heat treated center balls are cross-drilled for thru-bolt lubrication and the joint internals are retained with 2 heavy duty, heat treated side washers and a snap ring. The outer shell is weldable .180 in. wall machined DOM tubing that is fitted with a zerk fitting for greasing. This specific joint is a 2 1/2 in. o.d. and features a 2.812 in. mounting width and a .750 in. thru bolt hole.
RockJock Johnny Joint Rod End 2 1/2in Weld-On 2.590in X .718in Ball Ext. Greased
$62.00
RockJocks weld-on Johnny Joints(R) for fabricators and suspension system builders offer 30 degrees of unrestricted movement in any direction as compared to 22 degrees on a common heim joint! Johnny Joint(R) rod ends offer cushioning that a heim joint cannot provide via high-density urethane bushings that encase the inner ball. The heat treated center balls are cross-drilled for thru-bolt lubrication and the joint internals are retained with 2 heavy duty, heat treated side washers and a snap ring. The outer shell is weldable .180 in. wall machined DOM tubing that is fitted with a zerk fitting for greasing. This specific joint is a 2 1/2 in. o.d. and features a 2.590 in. mounting width and a .718 in. thru bolt hole.
RockJock Johnny Joint Rod End 2 1/2in Weld-On 2.585in X .640in Ball Ext. Greased
$62.00
RockJocks weld-on Johnny Joints(R) for fabricators and suspension system builders offer 30 degrees of unrestricted movement in any direction as compared to 22 degrees on a common heim joint! Johnny Joint(R) rod ends offer cushioning that a heim joint cannot provide via high-density urethane bushings that encase the inner ball. The heat treated center balls are cross-drilled for thru-bolt lubrication and the joint internals are retained with 2 heavy duty, heat treated side washers and a snap ring. The outer shell is weldable .180 in. wall machined DOM tubing that is fitted with a zerk fitting for greasing. This specific joint is a 2 1/2 in. o.d. and features a 2.585 in. mounting width and a .640 in. thru bolt hole.
RockJock Johnny Joint Rod End 2 1/2in Weld-On 2.368in X .625in Ball Ext. Greased
$62.00
RockJocks weld-on Johnny Joints(R) for fabricators and suspension system builders offer 30 degrees of unrestricted movement in any direction as compared to 22 degrees on a common heim joint! Johnny Joint(R) rod ends offer cushioning that a heim joint cannot provide via high-density urethane bushings that encase the inner ball. The heat treated center balls are cross-drilled for thru-bolt lubrication and the joint internals are retained with 2 heavy duty, heat treated side washers and a snap ring. The outer shell is weldable .180 in. wall machined DOM tubing that is fitted with a zerk fitting for greasing. This specific joint is a 2 1/2 in. o.d. and features a 2.465 in. mounting width and a .625 in. thru bolt hole. This ball center does not have a flange on one side for use in front trac bar applications.
RockJock Johnny Joint Rod End 2 1/2in Weld-On 2.440in X .515in Ball Ext. Greased
$62.00
RockJocks weld-on Johnny Joints(R) for fabricators and suspension system builders offer 30 degrees of unrestricted movement in any direction as compared to 22 degrees on a common heim joint! Johnny Joint(R) rod ends offer cushioning that a heim joint cannot provide via high-density urethane bushings that encase the inner ball. The heat treated center balls are cross-drilled for thru-bolt lubrication and the joint internals are retained with 2 heavy duty, heat treated side washers and a snap ring. The outer shell is weldable .180 in. wall machined DOM tubing that is fitted with a zerk fitting for greasing. This specific joint is a 2 1/2 in. o.d. and features a 2.440 in. mounting width and a .515 in. thru bolt hole.
RockJock Johnny Joint Rod End 2 1/2in Weld-On 2.440in X .468in Ball Ext. Greased
$62.00
RockJocks weld-on Johnny Joints(R) for fabricators and suspension system builders offer 30 degrees of unrestricted movement in any direction as compared to 22 degrees on a common heim joint! Johnny Joint(R) rod ends offer cushioning that a heim joint cannot provide via high-density urethane bushings that encase the inner ball. The heat treated center balls are cross-drilled for thru-bolt lubrication and the joint internals are retained with 2 heavy duty, heat treated side washers and a snap ring. The outer shell is weldable .180 in. wall machined DOM tubing that is fitted with a zerk fitting for greasing. This specific joint is a 2 1/2 in. o.d. and features a 2.440 in. mounting width and a .468 in. thru bolt hole.
RockJock Johnny Joint Rod End 2 1/2in Narrow Weld-On 2.365in X .562in Ball Ext. Greased
$62.00
RockJocks narrow style weld-on Johnny Joints(R) for fabricators and suspension system builders offer up to 40 degrees of unrestricted movement in any direction as compared to 22 degrees on a common heim joint! Johnny Joint(R) rod ends offer cushioning that a heim joint cannot provide via high-density urethane bushings that encase the inner ball. The heat treated center balls are cross-drilled for thru-bolt lubrication and the joint internals are retained with 2 heavy duty, heat treated side washers and a snap ring. The narrow style outer shell is weldable .180 in. wall machined DOM tubing that is fitted with a zerk fitting for greasing. This specific joint is a 2 1/2 in. o.d. and features a 2.365 in. mounting width and a .5625 in. thru bolt hole.This Part Fits:
Year
Make
Model
Submodel
2011
Jeep
Wrangler
70th Anniversary
2016
Jeep
Wrangler
75th Anniversary
2007-2017
Jeep
Wrangler
Rubicon
2007-2017
Jeep
Wrangler
Sahara
2010-2017
Jeep
Wrangler
Sport
2016
Jeep
Wrangler
Sport S
2011
Jeep
Wrangler
Unlimited 70th Anniversary
2016
Jeep
Wrangler
Unlimited 75th Anniversary
2007-2017
Jeep
Wrangler
Unlimited Rubicon
2007-2017
Jeep
Wrangler
Unlimited Sahara
2010-2017
Jeep
Wrangler
Unlimited Sport
2016
Jeep
Wrangler
Unlimited Sport S
2007-2010
Jeep
Wrangler
Unlimited X
2007-2010
Jeep
Wrangler
X
2018
Jeep
Wrangler JK
Rubicon
2018
Jeep
Wrangler JK
Sahara
2018
Jeep
Wrangler JK
Sport
2018
Jeep
Wrangler JK
Unlimited Rubicon
2018
Jeep
Wrangler JK
Unlimited Sahara
2018
Jeep
Wrangler JK
Unlimited Sport
RockJock Johnny Joint Rod End 2 1/2in Narrow Weld-On 2.625in X .562in Ball Ext. Greased
$62.00
RockJocks narrow style weld-on Johnny Joints(R) for fabricators and suspension system builders offer up to 40 degrees of unrestricted movement in any direction as compared to 22 degrees on a common heim joint! Johnny Joint(R) rod ends offer cushioning that a heim joint cannot provide via high-density urethane bushings that encase the inner ball. The heat treated center balls are cross-drilled for thru-bolt lubrication and the joint internals are retained with 2 heavy duty, heat treated side washers and a snap ring. The narrow style outer shell is weldable .180 in. wall machined DOM tubing that is fitted with a zerk fitting for greasing. This specific joint is a 2 1/2 in. o.d. and features a 2.625 in. mounting width and a .5625 in. thru bolt hole.
RockJock Johnny Joint Rod End 2 1/2in Weld-On Chromoly Barrel 2.625in X .562in Ball
$70.00
RockJocks weld-on chromoly Johnny Joints(R) for fabricators and suspension system builders offer 30 degrees of unrestricted movement in any direction as compared to 22 degrees on a common heim joint! Johnny Joint(R) rod ends offer cushioning that a heim joint cannot provide via high-density urethane bushings that encase the inner ball. The heat treated center balls are cross-drilled for thru-bolt lubrication and the joint internals are retained with 2 heavy duty, heat treated side washers and a snap ring. The outer shell is weldable .180 in. wall machined chromoly tubing that is fitted with a zerk fitting for greasing. This specific joint is a 2 1/2 in. o.d. and features a 2.625 in. mounting width and a .5625 in. thru bolt hole.
RockJock Johnny Joint 2 1/2in Rod End Weld-On Chromoly Barrel 2.625in X .562in Ball
$79.00
RockJocks weld-on chromoly Johnny Joints(R) for fabricators and suspension system builders offer 30 degrees of unrestricted movement in any direction as compared to 22 degrees on a common heim joint! Johnny Joint(R) rod ends offer cushioning that a heim joint cannot provide via high-density urethane bushings that encase the inner ball. The heat treated center balls are cross-drilled for thru-bolt lubrication and the joint internals are retained with 2 heavy duty, heat treated side washers and a snap ring. The outer shell is weldable .180 in. wall machined chromoly tubing. This specific joint is a 2 1/2 in. o.d. and features a 2.625 in. mounting width and a .5625 in. thru bolt hole. Grade 8 greasable bolt with nut and washers included.
RockJock Johnny Joint Rod End 2 1/2in Weld-On 2.625in X .640in Ball Int. Greased
$70.00
RockJocks weld-on Johnny Joints(R) for fabricators and suspension system builders offer 30 degrees of unrestricted movement in any direction as compared to 22 degrees on a common heim joint! Johnny Joint(R) rod ends offer cushioning that a heim joint cannot provide via high-density urethane bushings that encase the inner ball. The heat treated center balls are cross-drilled for thru-bolt lubrication and the joint internals are retained with 2 heavy duty, heat treated side washers and a snap ring. The outer shell is weldable .180 in. wall machined DOM tubing. This specific joint is a 2 1/2 in. o.d. and features a 2.625 in. mounting width and a .625 in. thru bolt hole. Grade 8 greasable bolt with nut and washers included.
RockJock Johnny Joint Rod End 2 1/2in Weld-On 2.585in X .625in Ball Int. Greased
$70.00
RockJocks weld-on Johnny Joints(R) for fabricators and suspension system builders offer 30 degrees of unrestricted movement in any direction as compared to 22 degrees on a common heim joint! Johnny Joint(R) rod ends offer cushioning that a heim joint cannot provide via high-density urethane bushings that encase the inner ball. The heat treated center balls are cross-drilled for thru-bolt lubrication and the joint internals are retained with 2 heavy duty, heat treated side washers and a snap ring. The outer shell is weldable .180 in. wall machined DOM tubing. This specific joint is a 2 1/2 in. o.d. and features a 2.585 in. mounting width and a .625 in. thru bolt hole. Grade 8 greasable bolt with nut and washers included.
RockJock Johnny Joint Rod End 2 1/2in Weld-On 2.365in X .562in Ball Int. Greased
$70.00
RockJocks weld-on Johnny Joints(R) for fabricators and suspension system builders offer 30 degrees of unrestricted movement in any direction as compared to 22 degrees on a common heim joint! Johnny Joint(R) rod ends offer cushioning that a heim joint cannot provide via high-density urethane bushings that encase the inner ball. The heat treated center balls are cross-drilled for thru-bolt lubrication and the joint internals are retained with 2 heavy duty, heat treated side washers and a snap ring. The outer shell is weldable .180 in. wall machined DOM tubing. This specific joint is a 2 1/2 in. o.d. and features a 2.365 in. mounting width and a .5625 in. thru bolt hole. Grade 8 greasable bolt with nut and washers included.
RockJock Johnny Joint Rod End 2 1/2in Weld-On 2.440in X .515in Ball Int. Greased
$70.00
RockJocks weld-on Johnny Joints(R) for fabricators and suspension system builders offer 30 degrees of unrestricted movement in any direction as compared to 22 degrees on a common heim joint! Johnny Joint(R) rod ends offer cushioning that a heim joint cannot provide via high-density urethane bushings that encase the inner ball. The heat treated center balls are cross-drilled for thru-bolt lubrication and the joint internals are retained with 2 heavy duty, heat treated side washers and a snap ring. The outer shell is weldable .180 in. wall machined DOM tubing. This specific joint is a 2 1/2 in. o.d. and features a 2.440 in. mounting width and a .515 in. thru bolt hole. Grade 8 greasable bolt with nut and washers included.
LIQUI MOLY 35mL Power Steering Oil Leak Stop
$75.72
$185.88
Keeps rubber and plastic seals in hydraulic power steering systems soft and pliable. Leaks caused by hardened and brittle seals are prevented or eliminated. Cleans internal oil passages to allow proper oil flow, reduces noise levels and extends service life while reducing repair costs.Product Specifications SheetProduct Specifications Sheet
SuperPro 1990 Lexus LS400 Base Rear Trailing Arm Rearward Bushing Kit
$56.99
SuperPro 1990 Lexus LS400 Base Rear Trailing Arm Rearward Bushing KitThis Part Fits:
Year
Make
Model
Submodel
1990-1994
Lexus
LS400
Base
EBC 01-03 Mazda Miata MX5 1.8 (Sports Suspension) Ultimax2 Front Brake Pads
$75.90
$79.89
If you simply need a quality OEM replacement pad, look no further than Ultimax. Made in the UK Bristol EBC Brakes manufacturing plant Ultimax is a beautifully engineered brake compound that lasts well, produces minimal dust and is the perfect choice for the urban or daily driver. Why spend more if all you need is a quality replacement pad.The Ultimax pad does include a small percentage of steel fibre to achieve its price point, far less content than our competition where steel fibre content can attain 50 volume and this optimum fibre blend is what makes Ultimax both popular and unique amongst brake blends .Once bedded in Ultimax will inspire confidence in any car light truck or SUV no matter how you drive.Its universal heat range abilities and low rotor wear are additional benefits of the Ultimax pad range which is the EBC worldwide number one selling brake with numbers of sets sold running into tens of millions over the recent years. Unlike many of our performance grades Ultimax has remain unchanged as a pad compound for ten years now, a true testament to its success and customer acceptance. Why change a winning formula.Black coded in the EBC range EBC Ultimax is a fully ECE R 90 approved brake pad range and at its lower price point, less than HALF the price of original parts yet TOTALLY EQUIVALENT by nature of its R 90 brake safety approval, Ultimax offers great value for money and first class driving safety.When replacing brakes of any kind please remember how important brake safety is to your own well being and either have a professional mechanic install your new brakes or if you are a qualified mechanic use the EBC installation DVD as a guide in support of your vehicle owner’s manual. These installation guide DVD tasters can be viewed here and the full DVD purchased from online vendors.Installation InstructionsInstallation InstructionsWarrantyThis Part Fits:
Year
Make
Model
Submodel
2001-2005
Mazda
Miata
Base
2001-2005
Mazda
Miata
LS
2004-2005
Mazda
Miata
Mazdaspeed
2001-2003
Mazda
Miata
SE
2003
Mazda
Miata
Shinsen
EBC 06-07 Cadillac CTS 2.8 (Sports Suspension) Ultimax2 Rear Brake Pads
$60.08
$63.24
If you simply need a quality OEM replacement pad, look no further than Ultimax. Made in the UK Bristol EBC Brakes manufacturing plant Ultimax is a beautifully engineered brake compound that lasts well, produces minimal dust and is the perfect choice for the urban or daily driver. Why spend more if all you need is a quality replacement pad.The Ultimax pad does include a small percentage of steel fibre to achieve its price point, far less content than our competition where steel fibre content can attain 50 volume and this optimum fibre blend is what makes Ultimax both popular and unique amongst brake blends .Once bedded in Ultimax will inspire confidence in any car light truck or SUV no matter how you drive.Its universal heat range abilities and low rotor wear are additional benefits of the Ultimax pad range which is the EBC worldwide number one selling brake with numbers of sets sold running into tens of millions over the recent years. Unlike many of our performance grades Ultimax has remain unchanged as a pad compound for ten years now, a true testament to its success and customer acceptance. Why change a winning formula.Black coded in the EBC range EBC Ultimax is a fully ECE R 90 approved brake pad range and at its lower price point, less than HALF the price of original parts yet TOTALLY EQUIVALENT by nature of its R 90 brake safety approval, Ultimax offers great value for money and first class driving safety.When replacing brakes of any kind please remember how important brake safety is to your own well being and either have a professional mechanic install your new brakes or if you are a qualified mechanic use the EBC installation DVD as a guide in support of your vehicle owner’s manual. These installation guide DVD tasters can be viewed here and the full DVD purchased from online vendors.Installation InstructionsInstallation InstructionsWarrantyThis Part Fits:
Year
Make
Model
Submodel
2006-2007
Cadillac
CTS
Base
2006-2007
Cadillac
CTS
V
2004-2009
Cadillac
SRX
Base
2005-2011
Cadillac
STS
Base
2008-2009
Cadillac
STS
Platinum
2006-2009
Cadillac
STS
V
EBC 06-07 Cadillac CTS 2.8 (Sports Suspension) Ultimax2 Front Brake Pads
$94.65
$99.63
If you simply need a quality OEM replacement pad, look no further than Ultimax. Made in the UK Bristol EBC Brakes manufacturing plant Ultimax is a beautifully engineered brake compound that lasts well, produces minimal dust and is the perfect choice for the urban or daily driver. Why spend more if all you need is a quality replacement pad.The Ultimax pad does include a small percentage of steel fibre to achieve its price point, far less content than our competition where steel fibre content can attain 50 volume and this optimum fibre blend is what makes Ultimax both popular and unique amongst brake blends .Once bedded in Ultimax will inspire confidence in any car light truck or SUV no matter how you drive.Its universal heat range abilities and low rotor wear are additional benefits of the Ultimax pad range which is the EBC worldwide number one selling brake with numbers of sets sold running into tens of millions over the recent years. Unlike many of our performance grades Ultimax has remain unchanged as a pad compound for ten years now, a true testament to its success and customer acceptance. Why change a winning formula.Black coded in the EBC range EBC Ultimax is a fully ECE R 90 approved brake pad range and at its lower price point, less than HALF the price of original parts yet TOTALLY EQUIVALENT by nature of its R 90 brake safety approval, Ultimax offers great value for money and first class driving safety.When replacing brakes of any kind please remember how important brake safety is to your own well being and either have a professional mechanic install your new brakes or if you are a qualified mechanic use the EBC installation DVD as a guide in support of your vehicle owner’s manual. These installation guide DVD tasters can be viewed here and the full DVD purchased from online vendors.Installation InstructionsInstallation InstructionsWarrantyThis Part Fits:
Year
Make
Model
Submodel
2006-2007
Cadillac
CTS
Base
2006-2007
Cadillac
CTS
V
2004-2009
Cadillac
SRX
Base
2005-2008
Cadillac
STS
Base
2008
Cadillac
STS
Platinum
2006-2008
Cadillac
STS
V
2004-2005
Pontiac
Bonneville
GXP
2004-2005
Pontiac
Bonneville
SE
2004-2005
Pontiac
Bonneville
SLE
EBC 03-12 Mazda RX8 1.3 Rotary (Standard Suspension) Ultimax2 Front Brake Pads
$63.24
$66.57
If you simply need a quality OEM replacement pad, look no further than Ultimax. Made in the UK Bristol EBC Brakes manufacturing plant Ultimax is a beautifully engineered brake compound that lasts well, produces minimal dust and is the perfect choice for the urban or daily driver. Why spend more if all you need is a quality replacement pad.The Ultimax pad does include a small percentage of steel fibre to achieve its price point, far less content than our competition where steel fibre content can attain 50 volume and this optimum fibre blend is what makes Ultimax both popular and unique amongst brake blends .Once bedded in Ultimax will inspire confidence in any car light truck or SUV no matter how you drive.Its universal heat range abilities and low rotor wear are additional benefits of the Ultimax pad range which is the EBC worldwide number one selling brake with numbers of sets sold running into tens of millions over the recent years. Unlike many of our performance grades Ultimax has remain unchanged as a pad compound for ten years now, a true testament to its success and customer acceptance. Why change a winning formula.Black coded in the EBC range EBC Ultimax is a fully ECE R 90 approved brake pad range and at its lower price point, less than HALF the price of original parts yet TOTALLY EQUIVALENT by nature of its R 90 brake safety approval, Ultimax offers great value for money and first class driving safety.When replacing brakes of any kind please remember how important brake safety is to your own well being and either have a professional mechanic install your new brakes or if you are a qualified mechanic use the EBC installation DVD as a guide in support of your vehicle owner’s manual. These installation guide DVD tasters can be viewed here and the full DVD purchased from online vendors.Installation InstructionsInstallation InstructionsWarrantyThis Part Fits:
Year
Make
Model
Submodel
2008
Mazda
RX-8
40th Anniversary Edition
2004-2007
Mazda
RX-8
Base
2008-2011
Mazda
RX-8
Grand Touring
2009-2011
Mazda
RX-8
R3
2005
Mazda
RX-8
Shinka
2008-2011
Mazda
RX-8
Sport
2008-2009
Mazda
RX-8
Touring