RockJock Johnny Joint Rod End 2in Narrow Forged 2in X .4375in Ball 1in-14 LH Thread Shank RockJock Johnny Joint Rod End 2in Narrow Forged 2in X .4375in Ball 1in-14 LH Thread Shank
RockJock Johnny Joint Rod End 2in Narrow Forged 2in X .4375in Ball 1in-14 LH Thread Shank $66.00
RockJocks narrow forged Johnny Joints(R) for fabricators and suspension system builders offer 40 degrees of unrestricted movement in any direction as compared to 22 degrees on a common heim joint! Johnny Joint(R) rod ends offer cushioning that a heim joint cannot provide via high-density urethane bushings that encase the inner ball. The heat treated center balls are cross-drilled for thru-bolt lubrication and the joint internals are retained with 2 heavy duty, heat treated side washers and a snap ring. This specific joint is a 2 in. diameter, fitted with a zerk fitting for greasing, 2 1/4 in. of 1 in.-14 left hand threads on the shank, and a 2 in. mounting width ball with a .4375 in. thru bolt hole. Finished in gold zinc plating.
RockJock Johnny Joint Rod End 2in Narrow Forged 2in X .4375in Ball 1in-14 RH Thread Shank RockJock Johnny Joint Rod End 2in Narrow Forged 2in X .4375in Ball 1in-14 RH Thread Shank
RockJock Johnny Joint Rod End 2in Narrow Forged 2in X .4375in Ball 1in-14 RH Thread Shank $66.00
RockJocks narrow forged Johnny Joints(R) for fabricators and suspension system builders offer 40 degrees of unrestricted movement in any direction as compared to 22 degrees on a common heim joint! Johnny Joint(R) rod ends offer cushioning that a heim joint cannot provide via high-density urethane bushings that encase the inner ball. The heat treated center balls are cross-drilled for thru-bolt lubrication and the joint internals are retained with 2 heavy duty, heat treated side washers and a snap ring. This specific joint is a 2 in. diameter, fitted with a zerk fitting for greasing, 2 1/4 in. of 1 in.-14 right hand threads on the shank, and a 2 in. mounting width ball with a .4375 in. thru bolt hole. Finished in gold zinc plating.
RockJock Johnny Joint Rod End 2in Narrow Weld-On Weld-On 1.800in X .630in Ball Ext. Greased RockJock Johnny Joint Rod End 2in Narrow Weld-On Weld-On 1.800in X .630in Ball Ext. Greased
RockJock Johnny Joint Rod End 2in Narrow Weld-On Weld-On 1.800in X .630in Ball Ext. Greased $57.00
RockJocks narrow weld-on Johnny Joints(R) for fabricators and suspension system builders offer 40 degrees of unrestricted movement in any direction as compared to 22 degrees on a common heim joint! Johnny Joint(R) rod ends offer cushioning that a heim joint cannot provide via a high-density urethane bushing that encases the inner ball. The heat treated center balls are cross-drilled for thru-bolt lubrication and the joint internals are retained with 2 heavy duty, heat treated side washers and a snap ring. The outer shell is weldable .180 in. wall machined DOM tubing, fitted with a zerk fitting for greasing. This specific joint is a 2 in. o.d. narrow body and features a 1.800 in. mounting width and a .630 in. thru bolt hole.
RockJock Johnny Joint Rod End 2in Narrow Weld-On Weld-On 1.600in X .625in Ball Ext. Greased RockJock Johnny Joint Rod End 2in Narrow Weld-On Weld-On 1.600in X .625in Ball Ext. Greased
RockJock Johnny Joint Rod End 2in Narrow Weld-On Weld-On 1.600in X .625in Ball Ext. Greased $57.00
RockJocks narrow weld-on Johnny Joints(R) for fabricators and suspension system builders offer 40 degrees of unrestricted movement in any direction as compared to 22 degrees on a common heim joint! Johnny Joint(R) rod ends offer cushioning that a heim joint cannot provide via a high-density urethane bushing that encases the inner ball. The heat treated center balls are cross-drilled for thru-bolt lubrication and the joint internals are retained with 2 heavy duty, heat treated side washers and a snap ring. The outer shell is weldable .180 in. wall machined DOM tubing, fitted with a zerk fitting for greasing. This specific joint is a 2 in. o.d. narrow body and features a 1.600 in. mounting width and a .625 in. thru bolt hole.
RockJock Johnny Joint Rod End 2in Narrow Weld-On Weld-On 1.600in X .562in Ball Ext. Greased RockJock Johnny Joint Rod End 2in Narrow Weld-On Weld-On 1.600in X .562in Ball Ext. Greased
RockJock Johnny Joint Rod End 2in Narrow Weld-On Weld-On 1.600in X .562in Ball Ext. Greased $57.00
RockJocks narrow weld-on Johnny Joints(R) for fabricators and suspension system builders offer 40 degrees of unrestricted movement in any direction as compared to 22 degrees on a common heim joint! Johnny Joint(R) rod ends offer cushioning that a heim joint cannot provide via high-density urethane bushing that encases the inner ball.. The heat treated center balls are cross-drilled for thru-bolt lubrication and the joint internals are retained with 2 heavy duty, heat treated side washers and a snap ring. The outer shell is weldable .180 in. wall machined DOM tubing, fitted with a zerk fitting for greasing. This specific joint is a 2 in. o.d. narrow body and features a 1.600 in. mounting width and a .562 in. thru bolt hole.
RockJock Johnny Joint Rod End 2in Narrow Weld-On Weld-On 2in X .500in Ball Ext. Greased RockJock Johnny Joint Rod End 2in Narrow Weld-On Weld-On 2in X .500in Ball Ext. Greased
RockJock Johnny Joint Rod End 2in Narrow Weld-On Weld-On 2in X .500in Ball Ext. Greased $57.00
RockJocks narrow weld-on Johnny Joints(R) for fabricators and suspension system builders offer 40 degrees of unrestricted movement in any direction as compared to 22 degrees on a common heim joint! Johnny Joint(R) rod ends offer cushioning that a heim joint cannot provide via high-density urethane bushing that encases the inner ball. The heat treated center balls are cross-drilled for thru-bolt lubrication and the joint internals are retained with 2 heavy duty, heat treated side washers and a snap ring. The outer shell is weldable .180 in. wall machined DOM tubing, fitted with a zerk fitting for greasing. This specific joint is a 2 in. o.d. narrow body and features a 2 in. mounting width and a .500 in. thru bolt hole.
RockJock Johnny Joint Rod End 2in Narrow Weld-On 1.600in X .480in Ball Ext. Greased RockJock Johnny Joint Rod End 2in Narrow Weld-On 1.600in X .480in Ball Ext. Greased
RockJock Johnny Joint Rod End 2in Narrow Weld-On 1.600in X .480in Ball Ext. Greased $57.00
RockJocks narrow weld-on Johnny Joints(R) for fabricators and suspension system builders offer 40 degrees of unrestricted movement in any direction as compared to 22 degrees on a common heim joint! Johnny Joint(R) rod ends offer cushioning that a heim joint cannot provide via high-density urethane bushing that encases the inner ball. The heat treated center balls are cross-drilled for thru-bolt lubrication and the joint internals are retained with 2 heavy duty, heat treated side washers and a snap ring. The outer shell is weldable .180 in. wall machined DOM tubing, fitted with a zerk fitting for greasing. This specific joint is a 2 in. o.d. narrow body and features a 1.600 in. mounting width and a .480 in. thru bolt hole.
RockJock Johnny Joint Rod End 2in Forged 1.850in X .562in Ball 1in-14 LH Thread Shank Ext. Greased RockJock Johnny Joint Rod End 2in Forged 1.850in X .562in Ball 1in-14 LH Thread Shank Ext. Greased
RockJock Johnny Joint Rod End 2in Forged 1.850in X .562in Ball 1in-14 LH Thread Shank Ext. Greased $66.00
RockJocks narrow forged Johnny Joints(R) for fabricators and suspension system builders offer 40 degrees of unrestricted movement in any direction as compared to 22 degrees on a common heim joint! Johnny Joint(R) rod ends offer cushioning that a heim joint cannot provide via high-density urethane bushing that encases the inner ball. The heat treated center balls are cross-drilled for thru-bolt lubrication and the joint internals are retained with 2 heavy duty, heat treated side washers and a snap ring. This specific joint is a 2 in. diameter, fitted with a zerk fitting for greasing, 2 1/4 in. of 1 in.-14 left hand threads on the shank, and a 1.850 in. mounting width ball with a .562 in. thru bolt hole. Finished in gold zinc plating.
RockJock Johnny Joint Rod End 2in Forged 1.750in X .500in Ball 1in-14 LH Thread Shank Ext. Greased RockJock Johnny Joint Rod End 2in Forged 1.750in X .500in Ball 1in-14 LH Thread Shank Ext. Greased
RockJock Johnny Joint Rod End 2in Forged 1.750in X .500in Ball 1in-14 LH Thread Shank Ext. Greased $66.00
RockJocks narrow forged Johnny Joints(R) for fabricators and suspension system builders offer 40 degrees of unrestricted movement in any direction as compared to 22 degrees on a common heim joint! Johnny Joint(R) rod ends offer cushioning that a heim joint cannot provide via high-density urethane bushing that encases the inner ball. The heat treated center balls are cross-drilled for thru-bolt lubrication and the joint internals are retained with 2 heavy duty, heat treated side washers and a snap ring. This specific joint is a 2 in. diameter, fitted with a zerk fitting for greasing, 2 1/4 in. of 1 in.-14 left hand threads on the shank, and a 1.750 in. mounting width ball with a .500 in. thru bolt hole. Finished in gold zinc plating.
RockJock Johnny Joint Rod End 2in Forged 1.800in X .625in Ball 1in-14 LH Thread Shank Ext. Greased RockJock Johnny Joint Rod End 2in Forged 1.800in X .625in Ball 1in-14 LH Thread Shank Ext. Greased
RockJock Johnny Joint Rod End 2in Forged 1.800in X .625in Ball 1in-14 LH Thread Shank Ext. Greased $66.00
RockJocks narrow forged Johnny Joints(R) for fabricators and suspension system builders offer 40 degrees of unrestricted movement in any direction as compared to 22 degrees on a common heim joint! Johnny Joint(R) rod ends offer cushioning that a heim joint cannot provide via high-density urethane bushing that encases the inner ball. The heat treated center balls are cross-drilled for thru-bolt lubrication and the joint internals are retained with 2 heavy duty, heat treated side washers and a snap ring. This specific joint is a 2 in. diameter, fitted with a zerk fitting for greasing, 2 1/4 in. of 1 in.-14 left hand threads on the shank, and a 1.800 in. mounting width ball with a .625 in. thru bolt hole. Finished in gold zinc plating.
RockJock Johnny Joint Rod End 2in Forged 1.600in X .625in Ball 1in-14 LH Thread Shank Ext. Greased RockJock Johnny Joint Rod End 2in Forged 1.600in X .625in Ball 1in-14 LH Thread Shank Ext. Greased
RockJock Johnny Joint Rod End 2in Forged 1.600in X .625in Ball 1in-14 LH Thread Shank Ext. Greased $66.00
RockJocks narrow forged Johnny Joints(R) for fabricators and suspension system builders offer 40 degrees of unrestricted movement in any direction as compared to 22 degrees on a common heim joint! Johnny Joint(R) rod ends offer cushioning that a heim joint cannot provide via high-density urethane bushing that encases the inner ball. The heat treated center balls are cross-drilled for thru-bolt lubrication and the joint internals are retained with 2 heavy duty, heat treated side washers and a snap ring. This specific joint is a 2 in. diameter, fitted with a zerk fitting for greasing, 2 1/4 in. of 1 in.-14 left hand threads on the shank, and a 1.600 in. mounting width ball with a .625 in. thru bolt hole. Finished in gold zinc plating.
RockJock Johnny Joint Rod End 2in Forged 1.600in X .562in Ball 1in-14 LH Thread Shank Ext. Greased RockJock Johnny Joint Rod End 2in Forged 1.600in X .562in Ball 1in-14 LH Thread Shank Ext. Greased
RockJock Johnny Joint Rod End 2in Forged 1.600in X .562in Ball 1in-14 LH Thread Shank Ext. Greased $66.00
RockJocks narrow forged Johnny Joints(R) for fabricators and suspension system builders offer 40 degrees of unrestricted movement in any direction as compared to 22 degrees on a common heim joint! Johnny Joint(R) rod ends offer cushioning that a heim joint cannot provide via high-density urethane bushing that encases the inner ball. The heat treated center balls are cross-drilled for thru-bolt lubrication and the joint internals are retained with 2 heavy duty, heat treated side washers and a snap ring. This specific joint is a 2 in. diameter, fitted with a zerk fitting for greasing, 2 1/4 in. of 1 in.-14 left hand threads on the shank, and a 1.600 in. mounting width ball with a .562 in. thru bolt hole. Finished in gold zinc plating.
RockJock Johnny Joint Rod End 2in Narrow Forged 2in X .500in Ball 1in-14 LH Thread Shank RockJock Johnny Joint Rod End 2in Narrow Forged 2in X .500in Ball 1in-14 LH Thread Shank
RockJock Johnny Joint Rod End 2in Narrow Forged 2in X .500in Ball 1in-14 LH Thread Shank $66.00
RockJocks narrow forged Johnny Joints(R) for fabricators and suspension system builders offer 40 degrees of unrestricted movement in any direction as compared to 22 degrees on a common heim joint! Johnny Joint(R) rod ends offer cushioning that a heim joint cannot provide via high-density urethane bushing that encases the inner ball. The heat treated center balls are cross-drilled for thru-bolt lubrication and the joint internals are retained with 2 heavy duty, heat treated side washers and a snap ring. This specific joint is a 2 in. diameter, fitted with a zerk fitting for greasing, 2 1/4 in. of 1 in.-14 left hand threads on the shank, and a 2 in. mounting width ball with a .500 in. thru bolt hole. Finished in gold zinc plating.
RockJock Johnny Joint Rod End 2in Forged 2.190in X .482in Ball 1in-14 LH Thread Shank Ext. Greased RockJock Johnny Joint Rod End 2in Forged 2.190in X .482in Ball 1in-14 LH Thread Shank Ext. Greased
RockJock Johnny Joint Rod End 2in Forged 2.190in X .482in Ball 1in-14 LH Thread Shank Ext. Greased $66.00
RockJocks narrow forged Johnny Joints(R) for fabricators and suspension system builders offer 40 degrees of unrestricted movement in any direction as compared to 22 degrees on a common heim joint! Johnny Joint(R) rod ends offer cushioning that a heim joint cannot provide via high-density urethane bushing that encases the inner ball. The heat treated center balls are cross-drilled for thru-bolt lubrication and the joint internals are retained with 2 heavy duty, heat treated side washers and a snap ring. This specific joint is a 2 in. diameter, fitted with a zerk fitting for greasing, 2 1/4 in. of 1 in.-14 left hand threads on the shank, and a 2.190 in. mounting width ball with a .482 in. thru bolt hole. Finished in gold zinc plating.
RockJock Johnny Joint 2in Forged w/ X-Axis Sealed Flex Joint 1in-14 RH Threads 1.600in x 14mm Ball
RockJock Johnny Joint 2in Forged w/ X-Axis Sealed Flex Joint 1in-14 RH Threads 1.600in x 14mm Ball $64.00
RockJock's 2 in. Forged Flex Axis rod end included in their Jeep JL Wrangler and JT Gladiator front trac bars features forged steel construction, 1 in.-14 right hand threaded shank and comes fully assembled with our sealed Flex-Axis joint, 1.625 in. wide ball center with a 14mm thru bolt hole. Finished in gold zinc plating. Notes: Joint end forging is 2 in. O.D. x .836 in. wide. Unit measures 5.75 in. from center of hole to end of threads.
RockJock Johnny Joint 2in Narrow Rod End 1.600in X .562in Ball 1in-14 RH Threaded Shank RockJock Johnny Joint 2in Narrow Rod End 1.600in X .562in Ball 1in-14 RH Threaded Shank
RockJock Johnny Joint 2in Narrow Rod End 1.600in X .562in Ball 1in-14 RH Threaded Shank $72.00
RockJocks narrow forged Johnny Joints(R) for fabricators and suspension system builders offer 40 degrees of unrestricted movement in any direction as compared to 22 degrees on a common heim joint! Johnny Joint(R) rod ends offer cushioning that a heim joint cannot provide via high-density urethane bushing that encases the inner ball. The heat treated center balls are cross-drilled for thru-bolt lubrication and the joint internals are retained with 2 heavy duty, heat treated side washers and a snap ring. This specific joint is a 2 in. diameter, fitted with a zerk fitting for greasing, 5 in. of 1 in.-14 right hand threads on the shank, and a 1.600 in. mounting width ball with a .562 in. thru bolt hole. Finished in gold zinc plating.
RockJock Johnny Joint Rod End 2in Narrow Forged 2in X .4375in Ball 3/4in-16 LH Threaded Shank RockJock Johnny Joint Rod End 2in Narrow Forged 2in X .4375in Ball 3/4in-16 LH Threaded Shank
RockJock Johnny Joint Rod End 2in Narrow Forged 2in X .4375in Ball 3/4in-16 LH Threaded Shank $66.00
RockJocks narrow forged Johnny Joints(R) for fabricators and suspension system builders offer 40 degrees of unrestricted movement in any direction as compared to 22 degrees on a common heim joint! Johnny Joint(R) rod ends offer cushioning that a heim joint cannot provide via high-density urethane bushing that encases the inner ball. The heat treated center balls are cross-drilled for thru-bolt lubrication and the joint internals are retained with 2 heavy duty, heat treated side washers and a snap ring. This specific joint is a 2 in. diameter, fitted with a zerk fitting for greasing, 2 1/4 in. of 3/4 in.-16 left hand threads on the shank, and a 2 in. mounting width ball with a .4375 in. thru bolt hole. Finished in gold zinc plating.
RockJock Johnny Joint Rod End 2in Narrow Forged 2in X .4375in Ball 3/4in-16 RH Threaded Shank RockJock Johnny Joint Rod End 2in Narrow Forged 2in X .4375in Ball 3/4in-16 RH Threaded Shank
RockJock Johnny Joint Rod End 2in Narrow Forged 2in X .4375in Ball 3/4in-16 RH Threaded Shank $66.00
RockJocks narrow forged Johnny Joints(R) for fabricators and suspension system builders offer 40 degrees of unrestricted movement in any direction as compared to 22 degrees on a common heim joint! Johnny Joint(R) rod ends offer cushioning that a heim joint cannot provide via high-density urethane bushing that encases the inner ball. The heat treated center balls are cross-drilled for thru-bolt lubrication and the joint internals are retained with 2 heavy duty, heat treated side washers and a snap ring. This specific joint is a 2 in. diameter, fitted with a zerk fitting for greasing, 2 1/4 in. of 3/4 in.-16 right hand threads on the shank, and a 2 in. mounting width ball with a .4375 in. thru bolt hole. Finished in gold zinc plating.
RockJock Johnny Joint Rod End 2in Narrow Forged 1.850in X .562in Ball 3/4in-16 LH Thread Shank RockJock Johnny Joint Rod End 2in Narrow Forged 1.850in X .562in Ball 3/4in-16 LH Thread Shank
RockJock Johnny Joint Rod End 2in Narrow Forged 1.850in X .562in Ball 3/4in-16 LH Thread Shank $66.00
RockJocks narrow forged Johnny Joints(R) for fabricators and suspension system builders offer 40 degrees of unrestricted movement in any direction as compared to 22 degrees on a common heim joint! Johnny Joint(R) rod ends offer cushioning that a heim joint cannot provide via high-density urethane bushing that encases the inner ball. The heat treated center balls are cross-drilled for thru-bolt lubrication and the joint internals are retained with 2 heavy duty, heat treated side washers and a snap ring. This specific joint is a 2 in. diameter, fitted with a zerk fitting for greasing, 2 1/4 in. of 3/4 in.-16 left hand threads on the shank, and a 1.850 in. mounting width ball with a .562 in. thru bolt hole. Finished in gold zinc plating.
RockJock Johnny Joint Rod End 2in Narrow Forged 1.750in X .500in Ball 3/4in-16 LH Thread Shank RockJock Johnny Joint Rod End 2in Narrow Forged 1.750in X .500in Ball 3/4in-16 LH Thread Shank
RockJock Johnny Joint Rod End 2in Narrow Forged 1.750in X .500in Ball 3/4in-16 LH Thread Shank $66.00
RockJocks narrow forged Johnny Joints(R) for fabricators and suspension system builders offer 40 degrees of unrestricted movement in any direction as compared to 22 degrees on a common heim joint! Johnny Joint(R) rod ends offer cushioning that a heim joint cannot provide via high-density urethane bushing that encases the inner ball. The heat treated center balls are cross-drilled for thru-bolt lubrication and the joint internals are retained with 2 heavy duty, heat treated side washers and a snap ring. This specific joint is a 2 in. diameter, fitted with a zerk fitting for greasing, 2 1/4 in. of 3/4 in.-16 left hand threads on the shank, and a 1.750 in. mounting width ball with a .500 in. thru bolt hole. Finished in gold zinc plating.
RockJock Johnny Joint Rod End 2in Narrow Forged 1.600in X .510in Ball 3/4in-16 LH Thread Shank RockJock Johnny Joint Rod End 2in Narrow Forged 1.600in X .510in Ball 3/4in-16 LH Thread Shank
RockJock Johnny Joint Rod End 2in Narrow Forged 1.600in X .510in Ball 3/4in-16 LH Thread Shank $66.00
RockJocks narrow forged Johnny Joints(R) for fabricators and suspension system builders offer 40 degrees of unrestricted movement in any direction as compared to 22 degrees on a common heim joint! Johnny Joint(R) rod ends offer cushioning that a heim joint cannot provide via high-density urethane bushing that encases the inner ball. The heat treated center balls are cross-drilled for thru-bolt lubrication and the joint internals are retained with 2 heavy duty, heat treated side washers and a snap ring. This specific joint is a 2 in. diameter, fitted with a zerk fitting for greasing, 2 1/4 in. of 3/4 in.-16 left hand threads on the shank, and a 1.600 in. mounting width ball with a .510 in. thru bolt hole. Finished in gold zinc plating.
RockJock Johnny Joint Rod End 2in Narrow Forged 1.600in X .625in Ball 3/4in-16 LH Thread Shank RockJock Johnny Joint Rod End 2in Narrow Forged 1.600in X .625in Ball 3/4in-16 LH Thread Shank
RockJock Johnny Joint Rod End 2in Narrow Forged 1.600in X .625in Ball 3/4in-16 LH Thread Shank $66.00
RockJocks narrow forged Johnny Joints(R) for fabricators and suspension system builders offer 40 degrees of unrestricted movement in any direction as compared to 22 degrees on a common heim joint! Johnny Joint(R) rod ends offer cushioning that a heim joint cannot provide via high-density urethane bushing that encases the inner ball. The heat treated center balls are cross-drilled for thru-bolt lubrication and the joint internals are retained with 2 heavy duty, heat treated side washers and a snap ring. This specific joint is a 2 in. diameter, fitted with a zerk fitting for greasing, 2 1/4 in. of 3/4 in.-16 left hand threads on the shank, and a 1.600 in. mounting width ball with a .625 in. thru bolt hole. Finished in gold zinc plating.
RockJock Johnny Joint Rod End 2in Narrow Forged 1.600in X .562in Ball 3/4in-16 LH Thread Shank RockJock Johnny Joint Rod End 2in Narrow Forged 1.600in X .562in Ball 3/4in-16 LH Thread Shank
RockJock Johnny Joint Rod End 2in Narrow Forged 1.600in X .562in Ball 3/4in-16 LH Thread Shank $66.00
RockJocks narrow forged Johnny Joints(R) for fabricators and suspension system builders offer 40 degrees of unrestricted movement in any direction as compared to 22 degrees on a common heim joint! Johnny Joint(R) rod ends offer cushioning that a heim joint cannot provide via high-density urethane bushing that encases the inner ball. The heat treated center balls are cross-drilled for thru-bolt lubrication and the joint internals are retained with 2 heavy duty, heat treated side washers and a snap ring. This specific joint is a 2 in. diameter, fitted with a zerk fitting for greasing, 2 1/4 in. of 3/4 in.-16 left hand threads on the shank, and a 1.600 in. mounting width ball with a .562 in. thru bolt hole. Finished in gold zinc plating.
RockJock Johnny Joint Rod End 2in Narrow Forged 2in X .500in Ball 3/4in-16 LH Thread Shank RockJock Johnny Joint Rod End 2in Narrow Forged 2in X .500in Ball 3/4in-16 LH Thread Shank
RockJock Johnny Joint Rod End 2in Narrow Forged 2in X .500in Ball 3/4in-16 LH Thread Shank $66.00
RockJocks narrow forged Johnny Joints(R) for fabricators and suspension system builders offer 40 degrees of unrestricted movement in any direction as compared to 22 degrees on a common heim joint! Johnny Joint(R) rod ends offer cushioning that a heim joint cannot provide via high-density urethane bushing that encases the inner ball. The heat treated center balls are cross-drilled for thru-bolt lubrication and the joint internals are retained with 2 heavy duty, heat treated side washers and a snap ring. This specific joint is a 2 in. diameter, fitted with a zerk fitting for greasing, 2 1/4 in. of 3/4 in.-16 left hand threads on the shank, and a 2 in. mounting width ball with a .500 in. thru bolt hole. Finished in gold zinc plating.
RockJock Johnny Joint Rod End 2in Narrow Forged 1.970in X .562in Ball 3/4in-16 RH Thread Shank RockJock Johnny Joint Rod End 2in Narrow Forged 1.970in X .562in Ball 3/4in-16 RH Thread Shank
RockJock Johnny Joint Rod End 2in Narrow Forged 1.970in X .562in Ball 3/4in-16 RH Thread Shank $66.00
RockJocks narrow forged Johnny Joints(R) for fabricators and suspension system builders offer 40 degrees of unrestricted movement in any direction as compared to 22 degrees on a common heim joint! Johnny Joint(R) rod ends offer cushioning that a heim joint cannot provide via high-density urethane bushing that encases the inner ball. The heat treated center balls are cross-drilled for thru-bolt lubrication and the joint internals are retained with 2 heavy duty, heat treated side washers and a snap ring. This specific joint is a 2 in. diameter, fitted with a zerk fitting for greasing, 2 1/4 in. of 3/4 in.-16 right hand threads on the shank, and a 1.970 in. mounting width ball with a .562 in. thru bolt hole. Finished in gold zinc plating.
RockJock Johnny Joint Rod End 2in Narrow Forged 2.445in X .515in Ball 3/4in-16 RH Thread Shank RockJock Johnny Joint Rod End 2in Narrow Forged 2.445in X .515in Ball 3/4in-16 RH Thread Shank
RockJock Johnny Joint Rod End 2in Narrow Forged 2.445in X .515in Ball 3/4in-16 RH Thread Shank $66.00
RockJocks narrow forged Johnny Joints(R) for fabricators and suspension system builders offer 40 degrees of unrestricted movement in any direction as compared to 22 degrees on a common heim joint! Johnny Joint(R) rod ends offer cushioning that a heim joint cannot provide via high-density urethane bushing that encases the inner ball. The heat treated center balls are cross-drilled for thru-bolt lubrication and the joint internals are retained with 2 heavy duty, heat treated side washers and a snap ring. This specific joint is a 2 in. diameter, fitted with a zerk fitting for greasing, 2 1/4 in. of 3/4 in.-16 right hand threads on the shank, and a 2.445 in. mounting width ball with a .515 in. thru bolt hole. Finished in gold zinc plating.
RockJock Johnny Joint Rod End 2in Narrow Forged 1.850in X .562in Ball 3/4in-16 RH Thread Shank RockJock Johnny Joint Rod End 2in Narrow Forged 1.850in X .562in Ball 3/4in-16 RH Thread Shank
RockJock Johnny Joint Rod End 2in Narrow Forged 1.850in X .562in Ball 3/4in-16 RH Thread Shank $66.00
RockJocks narrow forged Johnny Joints(R) for fabricators and suspension system builders offer 40 degrees of unrestricted movement in any direction as compared to 22 degrees on a common heim joint! Johnny Joint(R) rod ends offer cushioning that a heim joint cannot provide via high-density urethane bushing that encases the inner ball. The heat treated center balls are cross-drilled for thru-bolt lubrication and the joint internals are retained with 2 heavy duty, heat treated side washers and a snap ring. This specific joint is a 2 in. diameter, fitted with a zerk fitting for greasing, 2 1/4 in. of 3/4 in.-16 right hand threads on the shank, and a 1.850 in. mounting width ball with a .562 in. thru bolt hole. Finished in gold zinc plating.
RockJock Johnny Joint Rod End 2in Narrow Forged 1.750in X .500in Ball 3/4in-16 RH Thread Shank RockJock Johnny Joint Rod End 2in Narrow Forged 1.750in X .500in Ball 3/4in-16 RH Thread Shank
RockJock Johnny Joint Rod End 2in Narrow Forged 1.750in X .500in Ball 3/4in-16 RH Thread Shank $66.00
RockJocks narrow forged Johnny Joints(R) for fabricators and suspension system builders offer 40 degrees of unrestricted movement in any direction as compared to 22 degrees on a common heim joint! Johnny Joint(R) rod ends offer cushioning that a heim joint cannot provide via high-density urethane bushing that encases the inner ball. The heat treated center balls are cross-drilled for thru-bolt lubrication and the joint internals are retained with 2 heavy duty, heat treated side washers and a snap ring. This specific joint is a 2 in. diameter, fitted with a zerk fitting for greasing, 2 1/4 in. of 3/4 in.-16 right hand threads on the shank, and a 1.750 in. mounting width ball with a .500 in. thru bolt hole. Finished in gold zinc plating.
RockJock Johnny Joint Rod End 2in Narrow Forged 1.600in X .510in Ball 3/4in-16 RH Thread Shank RockJock Johnny Joint Rod End 2in Narrow Forged 1.600in X .510in Ball 3/4in-16 RH Thread Shank
RockJock Johnny Joint Rod End 2in Narrow Forged 1.600in X .510in Ball 3/4in-16 RH Thread Shank $66.00
RockJocks narrow forged Johnny Joints(R) for fabricators and suspension system builders offer 40 degrees of unrestricted movement in any direction as compared to 22 degrees on a common heim joint! Johnny Joint(R) rod ends offer cushioning that a heim joint cannot provide via high-density urethane bushing that encases the inner ball. The heat treated center balls are cross-drilled for thru-bolt lubrication and the joint internals are retained with 2 heavy duty, heat treated side washers and a snap ring. This specific joint is a 2 in. diameter, fitted with a zerk fitting for greasing, 2 1/4 in. of 3/4 in.-16 right hand threads on the shank, and a 1.600 in. mounting width ball with a .510 in. thru bolt hole. Finished in gold zinc plating.
RockJock Johnny Joint Rod End 2in Narrow Forged 1.600in X .625in Ball 3/4in-16 RH Thread Shank RockJock Johnny Joint Rod End 2in Narrow Forged 1.600in X .625in Ball 3/4in-16 RH Thread Shank
RockJock Johnny Joint Rod End 2in Narrow Forged 1.600in X .625in Ball 3/4in-16 RH Thread Shank $66.00
RockJocks narrow forged Johnny Joints(R) for fabricators and suspension system builders offer 40 degrees of unrestricted movement in any direction as compared to 22 degrees on a common heim joint! Johnny Joint(R) rod ends offer cushioning that a heim joint cannot provide via high-density urethane bushing that encases the inner ball. The heat treated center balls are cross-drilled for thru-bolt lubrication and the joint internals are retained with 2 heavy duty, heat treated side washers and a snap ring. This specific joint is a 2 in. diameter, fitted with a zerk fitting for greasing, 2 1/4 in. of 3/4 in.-16 right hand threads on the shank, and a 1.600 in. mounting width ball with a .625 in. thru bolt hole. Finished in gold zinc plating.
RockJock Johnny Joint Rod End 2in Narrow Forged 1.600in X .562in Ball 3/4in-16 RH Thread Shank RockJock Johnny Joint Rod End 2in Narrow Forged 1.600in X .562in Ball 3/4in-16 RH Thread Shank
RockJock Johnny Joint Rod End 2in Narrow Forged 1.600in X .562in Ball 3/4in-16 RH Thread Shank $66.00
RockJocks narrow forged Johnny Joints(R) for fabricators and suspension system builders offer 40 degrees of unrestricted movement in any direction as compared to 22 degrees on a common heim joint! Johnny Joint(R) rod ends offer cushioning that a heim joint cannot provide via high-density urethane bushing that encases the inner ball. The heat treated center balls are cross-drilled for thru-bolt lubrication and the joint internals are retained with 2 heavy duty, heat treated side washers and a snap ring. This specific joint is a 2 in. diameter, fitted with a zerk fitting for greasing, 2 1/4 in. of 3/4 in.-16 right hand threads on the shank, and a 1.600 in. mounting width ball with a .562 in. thru bolt hole. Finished in gold zinc plating.
RockJock Johnny Joint Rod End 2in Forged 1.850in X .562in Ball 1in-14 RH Thread Shank Ext. Greased RockJock Johnny Joint Rod End 2in Forged 1.850in X .562in Ball 1in-14 RH Thread Shank Ext. Greased
RockJock Johnny Joint Rod End 2in Forged 1.850in X .562in Ball 1in-14 RH Thread Shank Ext. Greased $66.00
RockJocks narrow forged Johnny Joints(R) for fabricators and suspension system builders offer 40 degrees of unrestricted movement in any direction as compared to 22 degrees on a common heim joint! Johnny Joint(R) rod ends offer cushioning that a heim joint cannot provide via high-density urethane bushing that encases the inner ball. The heat treated center balls are cross-drilled for thru-bolt lubrication and the joint internals are retained with 2 heavy duty, heat treated side washers and a snap ring. This specific joint is a 2 in. diameter, fitted with a zerk fitting for greasing, 2 1/4 in. of 1 in.-14 right hand threads on the shank, and a 1.850 in. mounting width ball with a .562 in. thru bolt hole. Finished in gold zinc plating.
RockJock Johnny Joint Rod End 2in Forged 1.615in X .718in Ball 1in-14 RH Thread Shank Ext. Greased RockJock Johnny Joint Rod End 2in Forged 1.615in X .718in Ball 1in-14 RH Thread Shank Ext. Greased
RockJock Johnny Joint Rod End 2in Forged 1.615in X .718in Ball 1in-14 RH Thread Shank Ext. Greased $66.00
RockJocks narrow forged Johnny Joints(R) for fabricators and suspension system builders offer 40 degrees of unrestricted movement in any direction as compared to 22 degrees on a common heim joint! Johnny Joint(R) rod ends offer cushioning that a heim joint cannot provide via high-density urethane bushing that encases the inner ball. The heat treated center balls are cross-drilled for thru-bolt lubrication and the joint internals are retained with 2 heavy duty, heat treated side washers and a snap ring. This specific joint is a 2 in. diameter, fitted with a zerk fitting for greasing, 2 1/4 in. of 1 in.-14 right hand threads on the shank, and a 1.615 in. mounting width ball with a .718 in. thru bolt hole. Finished in gold zinc plating.
RockJock Johnny Joint Rod End 2in Forged 1.750in X .500in Ball 1in-14 RH Thread Shank Ext. Greased RockJock Johnny Joint Rod End 2in Forged 1.750in X .500in Ball 1in-14 RH Thread Shank Ext. Greased
RockJock Johnny Joint Rod End 2in Forged 1.750in X .500in Ball 1in-14 RH Thread Shank Ext. Greased $66.00
RockJocks narrow forged Johnny Joints(R) for fabricators and suspension system builders offer 40 degrees of unrestricted movement in any direction as compared to 22 degrees on a common heim joint! Johnny Joint(R) rod ends offer cushioning that a heim joint cannot provide via high-density urethane bushing that encases the inner ball. The heat treated center balls are cross-drilled for thru-bolt lubrication and the joint internals are retained with 2 heavy duty, heat treated side washers and a snap ring. This specific joint is a 2 in. diameter, fitted with a zerk fitting for greasing, 2 1/4 in. of 1 in.-14 right hand threads on the shank, and a 1.750 in. mounting width ball with a .500 in. thru bolt hole. Finished in gold zinc plating.
RockJock Johnny Joint Rod End 2in Forged 1.800in X .625in Ball 1in-14 RH Thread Shank Ext. Greased RockJock Johnny Joint Rod End 2in Forged 1.800in X .625in Ball 1in-14 RH Thread Shank Ext. Greased
RockJock Johnny Joint Rod End 2in Forged 1.800in X .625in Ball 1in-14 RH Thread Shank Ext. Greased $66.00
RockJocks narrow forged Johnny Joints(R) for fabricators and suspension system builders offer 40 degrees of unrestricted movement in any direction as compared to 22 degrees on a common heim joint! Johnny Joint(R) rod ends offer cushioning that a heim joint cannot provide via high-density urethane bushing that encases the inner ball. The heat treated center balls are cross-drilled for thru-bolt lubrication and the joint internals are retained with 2 heavy duty, heat treated side washers and a snap ring. This specific joint is a 2 in. diameter, fitted with a zerk fitting for greasing, 2 1/4 in. of 1 in.-14 right hand threads on the shank, and a 1.800 in. mounting width ball with a .625 in. thru bolt hole. Finished in gold zinc plating.
RockJock Johnny Joint Rod End 2in Forged 1.600in X .480in Ball 1in-14 RH Thread Shank Ext. Greased RockJock Johnny Joint Rod End 2in Forged 1.600in X .480in Ball 1in-14 RH Thread Shank Ext. Greased
RockJock Johnny Joint Rod End 2in Forged 1.600in X .480in Ball 1in-14 RH Thread Shank Ext. Greased $66.00
RockJocks narrow forged Johnny Joints(R) for fabricators and suspension system builders offer 40 degrees of unrestricted movement in any direction as compared to 22 degrees on a common heim joint! Johnny Joint(R) rod ends offer cushioning that a heim joint cannot provide via high-density urethane bushing that encases the inner ball. The heat treated center balls are cross-drilled for thru-bolt lubrication and the joint internals are retained with 2 heavy duty, heat treated side washers and a snap ring. This specific joint is a 2 in. diameter, fitted with a zerk fitting for greasing, 2 1/4 in. of 1 in.-14 right hand threads on the shank, and a 1.600 in. mounting width ball with a .480 in. thru bolt hole. Finished in gold zinc plating.
American Express Apple Pay Diners Club Discover Meta Pay Google Pay Mastercard PayPal Shop Pay Venmo Visa