Fits Pontiac G8;Designed for street performance, autocross, and road race applications;Dramatically reduces body roll;91%-286% increase is sway bar rate over stock sway bar (depending on year and model);Cold formed to better resist torsional fatigue;Manufactured from 22mm heavy-wall DOM tubing for increased strength;Three-way adjustable for street and track use ;Adjustability allows for fine-tuning of suspension;88-durometer, greasable polyurethane bushing;Zinc-plated inner sleeves;Durable powdercoat finish;1-2-hour installation time;Proudly designed in the U.S.A.;Proudly made in the U.S.A.Application GuideThis Part Fits: Year Make Model Submodel 2008-2009 Pontiac G8 Base 2008-2009 Pontiac G8 GT 2009 Pontiac G8 GXP

The two primary functions of sway bars are to control body roll and to determine the understeer or oversteer behavior of a vehicle. Stock sway bars have low torsional spring rates because they are manufactured from small diameter bar stock or tubing. BMR Suspensions SB009 rear sway bar was designed by factoring in the vehicle weight, application, motion ratio, coil spring rate, and adjustability requirements. Manufactured from heavy-duty, solid 1-inch bar stock, the SB009 is cold formed to better resist torsional fatigue and retain its "memory" far longer than the hot-formed bars used by many competitors. The sway bar is CNC-formed for exact manufacturing tolerances and repeatable high quality. The sway bar mounts to the car using the factory mounting locations in the lower control arms.BMR Suspension designed the SB009 sway bar for street performance, autocross, and road race applications. The rear sway bar gives you a 200% increase in sway bar rate. This rate increase allows you to drive harder through corners with minimal body roll. The SB009 attaches to your A-body using the factory sway bar mounts. This allows for more sway bar control, and more control equals better handling. When performance is a must, rely on BMR Suspension!BMR Suspensions SB009 sway bars are available in black hammertone and red powdercoat for long-lasting good looks. Installation time is about 1-2 hours. Proudly made in the U.S.A.!Application GuideThis Part Fits: Year Make Model Submodel 1965-1967 Buick Gran Sport Base 1970,1972 Buick Skylark 350 1964-1972 Buick Skylark Base 1968-1972 Buick Skylark Custom 1967-1968 Chevrolet Chevelle 300 1967-1969 Chevrolet Chevelle 300 Deluxe 1964-1968,1970-1972 Chevrolet Chevelle Base 1967-1972 Chevrolet Chevelle Concours 1969-1972 Chevrolet Chevelle Concours Estate 1965-1967 Chevrolet Chevelle Deluxe 1969-1972 Chevrolet Chevelle Greenbrier 1968-1972 Chevrolet Chevelle Malibu 1968-1972 Chevrolet Chevelle Nomad 1964-1972 Chevrolet Chevelle SS 1964-1972 Chevrolet El Camino Base 1968-1972 Chevrolet El Camino Custom 1968-1972 Chevrolet El Camino SS 1964-1967 Chevrolet Malibu Base 1970-1972 Chevrolet Monte Carlo Base 1964-1971 Oldsmobile 442 Base 1964-1972 Oldsmobile Cutlass Base 1972 Oldsmobile Cutlass Cruiser 1964-1967 Oldsmobile Cutlass Holiday 1968,1971-1972 Oldsmobile Cutlass S 1967 Oldsmobile Cutlass Turnpike Cruiser 1964-1972 Pontiac GTO Base 1970-1971 Pontiac GTO The Judge 1964-1972 Pontiac LeMans Base 1972 Pontiac LeMans Luxury 1969-1970 Pontiac LeMans Safari 1970-1972 Pontiac LeMans Sport 1971 Pontiac LeMans T37

The two primary functions of sway bars are to control body roll and to determine the understeer or oversteer behavior of a vehicle. Stock sway bars have low torsional spring rates because they are manufactured from small diameter bar stock or tubing. BMR Suspensions SB009 rear sway bar was designed by factoring in the vehicle weight, application, motion ratio, coil spring rate, and adjustability requirements. Manufactured from heavy-duty, solid 1-inch bar stock, the SB009 is cold formed to better resist torsional fatigue and retain its "memory" far longer than the hot-formed bars used by many competitors. The sway bar is CNC-formed for exact manufacturing tolerances and repeatable high quality. The sway bar mounts to the car using the factory mounting locations in the lower control arms.BMR Suspension designed the SB009 sway bar for street performance, autocross, and road race applications. The rear sway bar gives you a 200% increase in sway bar rate. This rate increase allows you to drive harder through corners with minimal body roll. The SB009 attaches to your A-body using the factory sway bar mounts. This allows for more sway bar control, and more control equals better handling. When performance is a must, rely on BMR Suspension!BMR Suspensions SB009 sway bars are available in black hammertone and red powdercoat for long-lasting good looks. Installation time is about 1-2 hours. Proudly made in the U.S.A.!Application GuideThis Part Fits: Year Make Model Submodel 1965-1967 Buick Gran Sport Base 1970,1972 Buick Skylark 350 1964-1972 Buick Skylark Base 1968-1972 Buick Skylark Custom 1967-1968 Chevrolet Chevelle 300 1967-1969 Chevrolet Chevelle 300 Deluxe 1964-1968,1970-1972 Chevrolet Chevelle Base 1967-1972 Chevrolet Chevelle Concours 1969-1972 Chevrolet Chevelle Concours Estate 1965-1967 Chevrolet Chevelle Deluxe 1969-1972 Chevrolet Chevelle Greenbrier 1968-1972 Chevrolet Chevelle Malibu 1968-1972 Chevrolet Chevelle Nomad 1964-1972 Chevrolet Chevelle SS 1964-1972 Chevrolet El Camino Base 1968-1972 Chevrolet El Camino Custom 1968-1972 Chevrolet El Camino SS 1964-1967 Chevrolet Malibu Base 1970-1972 Chevrolet Monte Carlo Base 1964-1971 Oldsmobile 442 Base 1964-1972 Oldsmobile Cutlass Base 1972 Oldsmobile Cutlass Cruiser 1964-1967 Oldsmobile Cutlass Holiday 1968,1971-1972 Oldsmobile Cutlass S 1967 Oldsmobile Cutlass Turnpike Cruiser 1964-1972 Pontiac GTO Base 1970-1971 Pontiac GTO The Judge 1964-1972 Pontiac LeMans Base 1972 Pontiac LeMans Luxury 1969-1970 Pontiac LeMans Safari 1970-1972 Pontiac LeMans Sport 1971 Pontiac LeMans T37

BMR 93-02 F-Body Shock Spacer - Bare

BMR 93-02 F-Body QA1 Shock Spring Seats - Black Anodized

BMR 05-14 S197 Mustang Radiator Support w/ Sway Bar Mount - Red

BMR 05-14 S197 Mustang Radiator Support w/ Sway Bar Mount - Black Hammertone

BMR 05-14 S197 Mustang Radiator Support w/o Sway Bar Mount - Red

BMR 05-14 S197 Mustang Radiator Support w/o Sway Bar Mount - Black Hammertone

BMR 93-02 GM F-Body LT1/Turbo LS1 Radiator Shroud - Black Hammertone

BMR 93-02 F-Body LT1/Turbo LS1 Stainless Steel Radiator Shroud - Polished

BMR 78-87 G-Body Control Arm Reinforcement Braces - Red

BMR 78-87 G-Body Control Arm Reinforcement Braces - Black Hammertone

BMR 68-72 A-Body Control Arm Reinforcement Braces - Red

BMR 68-72 A-Body Control Arm Reinforcement Braces - Black Hammertone

BMR 64-67 A-Body Control Arm Reinforcement Braces - Red

BMR 64-67 A-Body Control Arm Reinforcement Braces - Black Hammertone

BMR 05-14 S197 Mustang On-Car Adj. Panhard Rod Poly Bushing/Rod End Combo - Red

BMR 05-14 S197 Mustang On-Car Adj. Panhard Rod Poly Bushing/Rod End Combo - Black Hammertone

BMR 82-02 3rd Gen F-Body On-Car Adj. Panhard Rod Poly Bushing/Rod End Combo - Red

BMR 82-02 3rd Gen F-Body On-Car Adj. Panhard Rod Poly Bushing/Rod End Combo - Black Hammertone

A Panhard rod is a suspension link that both locates the rear axle housing laterally and controls side-to-side movement. Factory S197 Mustang Panhard rods are made from weak U-shaped stamped steel with soft rubber bushings that allow excessive deflection under load. BMR Suspension's PHR006 Panhard rod is made 1.25-inch, 0.120-inch wall DOM tubing with TIG-welded chrome-moly tube adapters. The PHR006 features BMR's CNC-machined center adjuster, which is made from 4130 chrome-moly with rolled threads. The PHR006 features greasable, 95-durometer bushings, which add a solid, more responsive feel over the stock rubber bushings. BMR's bushings are internally fluted, which allows grease to evenly coat the inner sleeve, keeping grease in the bushing under high compression loads. These flutes also direct grease to the outer edge of the bushing, keeping the thrust surface lubricated. This efficient lubrication ensures quiet, reliable operation over the life of the bushings. BMR Suspension designed the PHR006 to work well for street performance, drag race, and road race applications. The heavy-duty construction eliminates the deflection seen in stamped-steel Panhard rods. Other Panhard rods on the market include rubber bushings that will deflect under heavy loads. The 95-durometer polyurethane bushings of the PHR006 reduce bushing deflection, giving you much-improved, repeatable handling characteristics on the street, starting line, or in aggressive corners. The on-car adjustable design makes the PHR006 great lowered Mustangs. This gives you all the strength and adjustability you need for great handling without huge increases in NVH. When performance is a must, rely on BMR Suspension!Application GuideThis Part Fits: Year Make Model Submodel 2005-2014 Ford Mustang Base 2012-2013 Ford Mustang Boss 302 2008-2009 Ford Mustang Bullitt 2005-2014 Ford Mustang GT 2007-2008 Ford Mustang Shelby GT 2007-2014 Ford Mustang Shelby GT500 2008-2009 Ford Mustang Shelby GT500KR

A Panhard rod is a suspension link that both locates the rear axle housing laterally and controls side-to-side movement. Factory S197 Mustang Panhard rods are made from weak U-shaped stamped steel with soft rubber bushings that allow excessive deflection under load. BMR Suspension's PHR006 Panhard rod is made 1.25-inch, 0.120-inch wall DOM tubing with TIG-welded chrome-moly tube adapters. The PHR006 features BMR's CNC-machined center adjuster, which is made from 4130 chrome-moly with rolled threads. The PHR006 features greasable, 95-durometer bushings, which add a solid, more responsive feel over the stock rubber bushings. BMR's bushings are internally fluted, which allows grease to evenly coat the inner sleeve, keeping grease in the bushing under high compression loads. These flutes also direct grease to the outer edge of the bushing, keeping the thrust surface lubricated. This efficient lubrication ensures quiet, reliable operation over the life of the bushings. BMR Suspension designed the PHR006 to work well for street performance, drag race, and road race applications. The heavy-duty construction eliminates the deflection seen in stamped-steel Panhard rods. Other Panhard rods on the market include rubber bushings that will deflect under heavy loads. The 95-durometer polyurethane bushings of the PHR006 reduce bushing deflection, giving you much-improved, repeatable handling characteristics on the street, starting line, or in aggressive corners. The on-car adjustable design makes the PHR006 great lowered Mustangs. This gives you all the strength and adjustability you need for great handling without huge increases in NVH. When performance is a must, rely on BMR Suspension!Application GuideThis Part Fits: Year Make Model Submodel 2005-2014 Ford Mustang Base 2012-2013 Ford Mustang Boss 302 2008-2009 Ford Mustang Bullitt 2005-2014 Ford Mustang GT 2007-2008 Ford Mustang Shelby GT 2007-2014 Ford Mustang Shelby GT500 2008-2009 Ford Mustang Shelby GT500KR

A Panhard rod is a suspension link that both locates the rear axle housing laterally and controls side-to-side movement. Factory S197 Mustang Panhard rods are made from weak U-shaped stamped steel with soft rubber bushings that allow excessive deflection under load. BMR Suspension's PHR005 Panhard rod is made 1.25-inch, 0.120-inch wall DOM tubing for unrivaled strength. The PHR005 features greasable, 95-durometer bushings, which add a solid, more responsive feel over the stock rubber bushings. BMR's bushings are internally fluted, which allows grease to evenly coat the inner sleeve, keeping grease in the bushing under high compression loads. These flutes also direct grease to the outer edge of the bushing, keeping the thrust surface lubricated. This efficient lubrication ensures quiet, reliable operation over the life of the bushings. BMR Suspension designed the PHR005 to work well for street performance, drag race, and road race applications. The heavy-duty construction eliminates the deflection seen in stamped-steel Panhard rods. Other Panhard rods on the market include rubber bushings that will deflect under heavy loads. The 95-durometer polyurethane bushings of the PHR005 reduce bushing deflection, giving you much-improved, repeatable handling characteristics on the street, starting line, or in aggressive corners. The non-adjustable design makes the PHR005 great for stock height Mustangs. This gives you all the strength you need for great handling without huge increases in NVH. When performance is a must, rely on BMR Suspension! BMR Suspension's PHR005 non-adjustable Panhard rod is available in black hammertone and red powdercoat for long-lasting good looks. Installation time is about 1 hour. Proudly made in the U.S.A.Application GuideThis Part Fits: Year Make Model Submodel 2005-2014 Ford Mustang Base 2012-2013 Ford Mustang Boss 302 2008-2009 Ford Mustang Bullitt 2005-2014 Ford Mustang GT 2007-2008 Ford Mustang Shelby GT 2007-2014 Ford Mustang Shelby GT500 2008-2009 Ford Mustang Shelby GT500KR

A Panhard rod is a suspension link that both locates the rear axle housing laterally and controls side-to-side movement. Factory S197 Mustang Panhard rods are made from weak U-shaped stamped steel with soft rubber bushings that allow excessive deflection under load. BMR Suspension's PHR005 Panhard rod is made 1.25-inch, 0.120-inch wall DOM tubing for unrivaled strength. The PHR005 features greasable, 95-durometer bushings, which add a solid, more responsive feel over the stock rubber bushings. BMR's bushings are internally fluted, which allows grease to evenly coat the inner sleeve, keeping grease in the bushing under high compression loads. These flutes also direct grease to the outer edge of the bushing, keeping the thrust surface lubricated. This efficient lubrication ensures quiet, reliable operation over the life of the bushings. BMR Suspension designed the PHR005 to work well for street performance, drag race, and road race applications. The heavy-duty construction eliminates the deflection seen in stamped-steel Panhard rods. Other Panhard rods on the market include rubber bushings that will deflect under heavy loads. The 95-durometer polyurethane bushings of the PHR005 reduce bushing deflection, giving you much-improved, repeatable handling characteristics on the street, starting line, or in aggressive corners. The non-adjustable design makes the PHR005 great for stock height Mustangs. This gives you all the strength you need for great handling without huge increases in NVH. When performance is a must, rely on BMR Suspension! BMR Suspension's PHR005 non-adjustable Panhard rod is available in black hammertone and red powdercoat for long-lasting good looks. Installation time is about 1 hour. Proudly made in the U.S.A.Application GuideThis Part Fits: Year Make Model Submodel 2005-2014 Ford Mustang Base 2012-2013 Ford Mustang Boss 302 2008-2009 Ford Mustang Bullitt 2005-2014 Ford Mustang GT 2007-2008 Ford Mustang Shelby GT 2007-2014 Ford Mustang Shelby GT500 2008-2009 Ford Mustang Shelby GT500KR

BMR 82-02 3rd Gen F-Body Panhard Rod Relocation Kit - Red

BMR 82-02 3rd Gen F-Body Panhard Rod Relocation Kit - Black Hammertone

BMR 82-02 3rd Gen F-Body Panhard Rod w/ Double Adj. Rod Ends - Red

BMR 82-02 3rd Gen F-Body Panhard Rod w/ Double Adj. Rod Ends - Black Hammertone

BMR 82-02 3rd Gen F-Body On-Car Adj. Panhard Rod (Polyurethane) - Red

BMR 82-02 3rd Gen F-Body On-Car Adj. Panhard Rod (Polyurethane) - Black Hammertone

BMR 82-02 3rd Gen F-Body Non-Adj. Panhard Rod (Polyurethane) - RedInstallation Instructions

BMR 82-02 3rd Gen F-Body Non-Adj. Panhard Rod (Polyurethane) - Black HammertoneInstallation Instructions

BMR 93-02 F-Body V6 Chrome Moly Shock Tower Brace - Red

BMR 93-02 F-Body V6 Chrome Moly Shock Tower Brace - Black Hammertone

BMR 93-02 F-Body V8 Chrome Moly Shock Tower Brace - Red