Dual free-flowing mufflers are used to absorb high pitch tones producing a powerful sound and unleashing all available horsepower and torque. The performance axle-back exhaust system is constructed of 3" to 2-1/2" mandrel-bent, brushed 304 stainless steel tubing for maximum performance, corrosion resistance and strength eliminating cracking. This axle-back exhaust system incorporates factory style NPP dual mode exhaust valves which use the factory exhaust valve motors (not included). The valves helps regulate, direct and control the flow of exhaust gases by opening, closing, or partially obstructing passageways depending on throttle position for maximum performance. This MACH Force-Xp axle-back exhaust system uses factory mounting locations providing stability and a hassle-free installation. Includes quad 4" diameter, carbon fiber tips with an aFe POWER logo. This item does not incorporate the AFM vales and will not fit models equipped with them.Installation InstructionsThis Part Fits: Year Make Model Submodel 2015-2019 Chevrolet Corvette Z06

In recent testing this Mach Force XP cat-back exhaust system produced 10 horsepower and 9 lbs. x ft. of torque. This exhaust system is constructed out of mandrel bent, 2.50 IN stainless steel and includes MIG welded hangers and OE style band clamps for a simple, leak-free bolt-on installation. A 2.50 IN high flow resonator is used to keep exhaust drone to a minimum while maintaining a sporty sound. aFe utilizes 3.5 IN double wall, angle cut, polished, stainless steel dual tips with an aFe laser etched logo which provides an aggressive yet elegant look.This Part Fits: Year Make Model Submodel 2010-2013 Volkswagen GTI Base 2014 Volkswagen GTI Driver's Edition 2014 Volkswagen GTI Wolfsburg Edition

The new MACH Force XP exhaust is engineered to perform in the most extreme environments. This system is constructed from mandrel bent 4 in. 409 stainless steel tubing for maximum flow; increased horsepower; increased torque; and lower EGTs. MACH Force XP exhaust systems are the perfect combination of performance; fit; and value. All systems use factory mounting locations providing stability and hassle-free installation. High quality OE style band clamps are used for a complete 360 deg. sealing surface. A free-flowing 24 in. long muffler is used to absorb high pitch tones producing a powerful sound and unleashing all available horsepower and torque out of your rig. OE style bayonet hangers are used to maintain a stable pipe location during high vibration and high heat conditions. The bayonet tip holds the hanger bushing in place for an OE style fit that does not change with time.This Part Fits: Year Make Model Submodel 2011-2014 Ford Mustang GT

The new MACH Force XP exhaust is engineered to perform in the most extreme environments. This system is constructed from mandrel bent 4 in. 409 stainless steel tubing for maximum flow; increased horsepower; increased torque; and lower EGTs. MACH Force XP exhaust systems are the perfect combination of performance; fit; and value. All systems use factory mounting locations providing stability and hassle-free installation. High quality OE style band clamps are used for a complete 360 deg. sealing surface. A free-flowing 24 in. long muffler is used to absorb high pitch tones producing a powerful sound and unleashing all available horsepower and torque out of your rig. OE style bayonet hangers are used to maintain a stable pipe location during high vibration and high heat conditions. The bayonet tip holds the hanger bushing in place for an OE style fit that does not change with time.This Part Fits: Year Make Model Submodel 2011-2014 Ford Mustang GT

This cat-back exhaust system is constructed of 3" - 2-1/2" mandrel-bent brushed finished 304 stainless steel tubing for maximum strength and durability. This system features a high-flow 304 stainless steel muffler, producing a powerful sound. Finishing off this exhaust system are quad 3-1/2" diameter black 304 stainless steel clamp-on exhaust tips. The tips features a laser etched aFe POWER logo for a unique style. This system produces a powerful sound unleashing all available horsepower and torque. Utilizing factory style hangers this system is a direct bolt-on system, which requires no cutting or modifications for a hassle-free installation. This cat-back exhaust system incorporates a factory style exhaust valves which use the factory exhaust valve motors (not included). The valves help regulate, direct and control the flow of exhaust gases by opening, closing, or partially obstructing passageways depending on throttle position for maximum performance. A mitered merge collector is used to decrease turbulence and increase exhaust velocity resulting in increased horsepower, torque and improved throttle response. Utilizing state-of-the-art computer-aided design technology, this exhaust system is designed for custom, high tolerance factory fitment. 100% TIG-Welded for race-proven strength and durability.This Part Fits: Year Make Model Submodel 2022-2025 BMW Z4 M40i 2020 BMW Z4 M40i First Edition 2020-2021 BMW Z4 sDrive M40i

The Mach Force XP cat-back exhaust system produces 11 hp and 10 lbs./ft. of torque. constructed from 2.75 in. mandrel bent 304 hand brushed stainless steel and utilizes a unique crossover pipe that helps to equalize exhaust pressure and tunes the exhaust pulse. Comes with dual 3.5 in. polished 304 stainless steel tips and muffler to build a mellow yet powerful sound. Engineered and manufactured in our Corona Ca manufacturing facility. All systems use factory mounting locations providing stability and hassle-free installation. High quality band clamps are used for a complete 360 deg. sealing surface. A free flowing muffler is used to absorb high pitch tones producing a powerful sound and unleashing all available horsepower and torque. The crossover balance tube equalizes and evenly distributes exhaust pulses traveling through the exhaust system. This not only creates more efficient flow and better performance it also reduces sound decibels ultimately minimizing exhaust drone.This Part Fits: Year Make Model Submodel 2014-2021 Jeep Grand Cherokee SRT 2012-2013 Jeep Grand Cherokee SRT8 2018-2021 Jeep Grand Cherokee Trackhawk

This Mach FORCE Xp exhaust system is constructed of 5" mandrel-bent stainless steel tubing for maximum flow. Smooth transition bends allow for low turbulence, increasing horsepower, torque and lowering EGT's.This Part Fits: Year Make Model Submodel 2014-2018 Ram 1500 Big Horn 2016-2018 Ram 1500 HFE 2014-2018 Ram 1500 Laramie 2014-2015 Ram 1500 Laramie Limited 2014-2018 Ram 1500 Laramie Longhorn 2015-2018 Ram 1500 Limited 2014-2018 Ram 1500 Lone Star 2014-2016 Ram 1500 Outdoorsman 2014-2018 Ram 1500 SLT 2018 Ram 1500 Sport 2014-2018 Ram 1500 Tradesman 2019 Ram 1500 Classic Laramie 2019 Ram 1500 Classic SLT 2019 Ram 1500 Classic Tradesman

This Mach FORCE Xp exhaust system is constructed of 5" mandrel-bent stainless steel tubing for maximum flow. Smooth transition bends allow for low turbulence, increasing horsepower, torque and lowering EGT's.This Part Fits: Year Make Model Submodel 2014-2018 Ram 1500 Big Horn 2016-2018 Ram 1500 HFE 2014-2018 Ram 1500 Laramie 2014-2015 Ram 1500 Laramie Limited 2014-2018 Ram 1500 Laramie Longhorn 2015-2018 Ram 1500 Limited 2014-2018 Ram 1500 Lone Star 2014-2016 Ram 1500 Outdoorsman 2014-2018 Ram 1500 SLT 2018 Ram 1500 Sport 2014-2018 Ram 1500 Tradesman 2019 Ram 1500 Classic Laramie 2019 Ram 1500 Classic SLT 2019 Ram 1500 Classic Tradesman

Engineered to perform in the most extreme environments. Constructed from mandrel bent 4 in. 409 stainless steel tubing for maximum flow; increased horsepower; increased torque and lower EGTS. All systems use factory mounting locations providing stability and hassle free installation. High quality OE style flange and band clamps are used for a complete 360 deg. sealing surface. A free flowing 24 in. long muffler is used to absorb high pitch tones producing a powerful sound and unleashing all available horsepower and torque out of your rig. OE style bayonet hangers are used to maintain a stable pipe locations during high vibration and high heat conditions. The bayonet tip holds the hanger bushing in place for an OE style fit that does not change with time.This Part Fits: Year Make Model Submodel 2014-2018 Ram 1500 Big Horn 2016-2018 Ram 1500 HFE 2014-2018 Ram 1500 Laramie 2014-2015 Ram 1500 Laramie Limited 2014-2018 Ram 1500 Laramie Longhorn 2015-2018 Ram 1500 Limited 2014-2018 Ram 1500 Lone Star 2014-2016 Ram 1500 Outdoorsman 2014-2018 Ram 1500 SLT 2018 Ram 1500 Sport 2014-2018 Ram 1500 Tradesman 2019 Ram 1500 Classic Laramie 2019 Ram 1500 Classic SLT 2019 Ram 1500 Classic Tradesman

Engineered to perform in the most extreme environments. Constructed from mandrel bent 4 in. 409 stainless steel tubing for maximum flow; increased horsepower; increased torque and lower EGTS. All systems use factory mounting locations providing stability and hassle free installation. High quality OE style flange and band clamps are used for a complete 360 deg. sealing surface. A free flowing 24 in. long muffler is used to absorb high pitch tones producing a powerful sound and unleashing all available horsepower and torque out of your rig. OE style bayonet hangers are used to maintain a stable pipe locations during high vibration and high heat conditions. The bayonet tip holds the hanger bushing in place for an OE style fit that does not change with time.This Part Fits: Year Make Model Submodel 2014-2018 Ram 1500 Big Horn 2016-2018 Ram 1500 HFE 2014-2018 Ram 1500 Laramie 2014-2015 Ram 1500 Laramie Limited 2014-2018 Ram 1500 Laramie Longhorn 2015-2018 Ram 1500 Limited 2014-2018 Ram 1500 Lone Star 2014-2016 Ram 1500 Outdoorsman 2014-2018 Ram 1500 SLT 2018 Ram 1500 Sport 2014-2018 Ram 1500 Tradesman 2019 Ram 1500 Classic Laramie 2019 Ram 1500 Classic SLT 2019 Ram 1500 Classic Tradesman

Engineered to perform in the most extreme environments. Constructed from mandrel bent 4 in. 409 stainless steel tubing for maximum flow; increased horsepower; increased torque and lower EGTS. All systems use factory mounting locations providing stability and hassle free installation. High quality OE style flange and band clamps are used for a complete 360 deg. sealing surface. A free flowing 24 in. long muffler is used to absorb high pitch tones producing a powerful sound and unleashing all available horsepower and torque out of your rig. OE style bayonet hangers are used to maintain a stable pipe locations during high vibration and high heat conditions. The bayonet tip holds the hanger bushing in place for an OE style fit that does not change with time.This Part Fits: Year Make Model Submodel 2014-2018 Ram 1500 Big Horn 2016-2018 Ram 1500 HFE 2014-2018 Ram 1500 Laramie 2014-2015 Ram 1500 Laramie Limited 2014-2018 Ram 1500 Laramie Longhorn 2015-2018 Ram 1500 Limited 2014-2018 Ram 1500 Lone Star 2014-2016 Ram 1500 Outdoorsman 2014-2018 Ram 1500 SLT 2018 Ram 1500 Sport 2014-2018 Ram 1500 Tradesman 2019 Ram 1500 Classic Laramie 2019 Ram 1500 Classic SLT 2019 Ram 1500 Classic Tradesman

The new MACH Force XP exhaust is engineered to perform in the most extreme environments. This system is constructed from mandrel bent 4 in. 409 stainless steel tubing for maximum flow; increased horsepower; increased torque; and lower EGTs. MACH Force XP exhaust systems are the perfect combination of performance; fit; and value. All systems use factory mounting locations providing stability and hassle-free installation. High quality OE style band clamps are used for a complete 360 deg. sealing surface. A free-flowing 24 in. long muffler is used to absorb high pitch tones producing a powerful sound and unleashing all available horsepower and torque out of your rig. OE style bayonet hangers are used to maintain a stable pipe location during high vibration and high heat conditions. The bayonet tip holds the hanger bushing in place for an OE style fit that does not change with time.This Part Fits: Year Make Model Submodel 2010-2014 Chevrolet Camaro LS 2010-2014 Chevrolet Camaro LT

aFe is proud to introduce the Cat-Back Exhaust System for the 2008 Volkswagen R32 MKV with the V6-3.2L engine. In recent testing this system produced 16 horsepower and 18 lbs. x ft. of torque. This exhaust starts out with 2.5 in. mandrel bent 304 stainless steel tubing and merges into dual 2.5 in. tubing which improves performance across the power band. The high-flow, stainless steel muffler gives an aggressive sound at high RPMs, yet maintaining a subtle tone at cruising speeds. To finish off this 100% TIG-welded exhaust are dual, 4 in. aFe power laser etched, double wall, gloss black, 304 stainless steel tips. It is a direct bolt-on system which requires no cutting or drilling and includes all necessary hardware for a hassle free installation. All aFe exhaust systems are engineered and manufactured in our Corona, California manufacturing facility.This Part Fits: Year Make Model Submodel 2008 Volkswagen R32 Base

aFe is proud to introduce the Dual Cat-Back Exhaust System for the 2012-2013 Volkswagen Beetle with the L4-2.0L Turbo engine. In recent testing this Mach Force XP cat-back exhaust system produced 7 horsepower and 14 lbs. x ft. of torque. This exhaust system is constructed out of mandrel-bent, 2.50 in. 304 stainless steel and includes MIG welded hangers and OE-style band clamps for a simple, leak-free, bolt-on installation. A huge 6 in. round high-flow muffler is used to keep exhaust drone to a minimum while maintaining a sporty sound. aFe utilizes dual 4 in. double wall, polished, stainless steel tips with an aFe laser-etched logo which provides an aggressive yet elegant look. All aFe exhaust systems are engineered and manufactured in our Corona, California manufacturing facility.This Part Fits: Year Make Model Submodel 2014 Volkswagen Beetle GSR 2013-2015 Volkswagen Beetle R-Line 2016 Volkswagen Beetle R-Line S 2016 Volkswagen Beetle R-Line SE 2016 Volkswagen Beetle R-Line SEL 2013-2014 Volkswagen Beetle TDI 2012-2013 Volkswagen Beetle Turbo

The Mach Force XP cat-back exhaust system produces 11 hp and 10 lbs./ft. of torque. constructed from 2.75 in. mandrel bent 304 hand brushed stainless steel and utilizes a unique crossover pipe that helps to equalize exhaust pressure and tunes the exhaust pulse. Comes with dual 3.5 in. polished 304 stainless steel tips and muffler to build a mellow yet powerful sound. Engineered and manufactured in our Corona Ca manufacturing facility. All systems use factory mounting locations providing stability and hassle-free installation. High quality band clamps are used for a complete 360 deg. sealing surface. A free flowing muffler is used to absorb high pitch tones producing a powerful sound and unleashing all available horsepower and torque. The crossover balance tube equalizes and evenly distributes exhaust pulses traveling through the exhaust system. This not only creates more efficient flow and better performance it also reduces sound decibels ultimately minimizing exhaust drone.This Part Fits: Year Make Model Submodel 2015-2020 Ford F-150 King Ranch 2015-2020 Ford F-150 Lariat 2016-2020 Ford F-150 Limited 2015-2020 Ford F-150 Platinum 2016-2020 Ford F-150 SSV 2015-2020 Ford F-150 XL 2015-2020 Ford F-150 XLT

aFe introduces the MACH Force XP exhaust system for the BMW M5 F10 twin-turbo. In recent testing this system produced 18 horsepower and 30 lbs. x ft. of torque. This unique exhaust system is constructed from TIG-welded, 3 in. mandrel bent 304 stainless steel and uses quad, high-flow mufflers. This system was designed and engineered by tuning the perfect tube lengths, ultimately maximizing performance across the power band while maintaining a great tone. Also included is an X-pipe balance tube which equalizes and evenly distributes exhaust pulses for increased flow and minimizing exhaust drone. To finish off this system, aFe uses four 4 in. carbon fiber tips with 303 stainless steel machined finish inserts. This exhaust uses all factory hanger locations for a has sle-free installation. No modifications necessary. All aFe exhaust systems are manufactured in our Corona, California manufacturing facility.This Part Fits: Year Make Model Submodel 2015-2020 Ford F-150 King Ranch 2015-2020 Ford F-150 Lariat 2015-2020 Ford F-150 Platinum 2016-2020 Ford F-150 SSV 2015-2020 Ford F-150 XL 2015-2020 Ford F-150 XLT

aFe is proud to announce the MACH Force XP cat-back exhaust system for the 2010-2013 Chevrolet Camaro with the V8-6.2L engine. In recent testing this system produced 22 horsepower and 26 lbs. x ft. of torque. This exhaust system is constructed from 3?, mandrel-bent, stainless steel and is MIG-welded. The system uses dual, high-flow mufflers with 3? tubing which improves performance across the power band while maintaining the true muscle car sound. aFe has incorporated an equalizer balance tube to evenly distribute exhaust pulses traveling through the exhaust system. This not only creates a more efficient flow and better performance, the equalizer balance tube also reduces sound decibels, minimizing exhaust drone. Included in this system are dual 4", double wall, polished, 304 stainless steel, slash cut aFe laser-etched exhaust tips. This exhaust uses all factory hanger locations for a hassle-free installation. No modifications necessary.This Part Fits: Year Make Model Submodel 2010-2013 Chevrolet Camaro SS 2012-2013 Chevrolet Camaro ZL1

Engineered to perform in the most extreme environments. Constructed from mandrel bent 4 in. 409 stainless steel tubing for maximum flow; increased horsepower; increased torque and lower EGTS. All systems use factory mounting locations providing stability and hassle free installation. High quality OE style flange and band clamps are used for a complete 360 deg. sealing surface. A free flowing 24 in. long muffler is used to absorb high pitch tones producing a powerful sound and unleashing all available horsepower and torque out of your rig. OE style bayonet hangers are used to maintain a stable pipe locations during high vibration and high heat conditions. The bayonet tip holds the hanger bushing in place for an OE style fit that does not change with time.This Part Fits: Year Make Model Submodel 2015-2016 Chevrolet Silverado 2500 HD High Country 2011-2016 Chevrolet Silverado 2500 HD LT 2011-2016 Chevrolet Silverado 2500 HD LTZ 2011-2016 Chevrolet Silverado 2500 HD WT 2015-2016 Chevrolet Silverado 3500 HD High Country 2011-2016 Chevrolet Silverado 3500 HD LT 2011-2016 Chevrolet Silverado 3500 HD LTZ 2011-2016 Chevrolet Silverado 3500 HD WT 2015-2016 GMC Sierra 2500 HD Base 2011-2016 GMC Sierra 2500 HD Denali 2011-2016 GMC Sierra 2500 HD SLE 2011-2016 GMC Sierra 2500 HD SLT 2011-2014 GMC Sierra 2500 HD WT 2015-2016 GMC Sierra 3500 HD Base 2011-2016 GMC Sierra 3500 HD Denali 2011-2016 GMC Sierra 3500 HD SLE 2011-2016 GMC Sierra 3500 HD SLT 2011-2014 GMC Sierra 3500 HD WT

The Mach Force XP cat-back exhaust system produces 11 hp and 10 lbs./ft. of torque. constructed from 2.75 in. mandrel bent 304 hand brushed stainless steel and utilizes a unique crossover pipe that helps to equalize exhaust pressure and tunes the exhaust pulse. Comes with dual 3.5 in. polished 304 stainless steel tips and muffler to build a mellow yet powerful sound. Engineered and manufactured in our Corona Ca manufacturing facility. All systems use factory mounting locations providing stability and hassle-free installation. High quality band clamps are used for a complete 360 deg. sealing surface. A free flowing muffler is used to absorb high pitch tones producing a powerful sound and unleashing all available horsepower and torque. The crossover balance tube equalizes and evenly distributes exhaust pulses traveling through the exhaust system. This not only creates more efficient flow and better performance it also reduces sound decibels ultimately minimizing exhaust drone.This Part Fits: Year Make Model Submodel 2008-2013 BMW M3 Base

This MACH Force XP Cat-Back exhaust system is constructed of 2-1/2" mandrel-bent stainless steel tubing and comes complete with free-flowing muffler, OE style bayonet hangers, band clamps and all hardware necessary for a hassle-free installation. The smooth curves and increased diameter of this exhaust system helps remove restriction and keeps exhaust gas flowing smoothly for increased horsepower and torque. This system produced +11 horsepower and +23 lbs. x ft. of torque over the stock exhaust system verified by our in house dyno. Hi-Tuck Tip: This exhaust system is finished off with a Hi-Tuck Tip that is developed to give you extra clearance during extreme angle climbs or descents. Installation is a Snap: This MACH Force XP uses all factory mounting locations providing stability and a hassle-free installation. Leak-Free Seal: High quality OE-style flange and premium band clamps are used for a complete 360-degree sealing surface eliminating leak paths. Aggressive Sound: A straight-through designed, free-flowing stainless steel muffler is used to absorb high pitch tones producing a powerful sound and unleashing all available horsepower and torque. Perfect Fit: OE-style bayonet hangers are used to maintain a stable pipe location during high vibration and high heat conditions. The bayonet tip holds the hanger bushing in place for an OE-style fit that does not change with time. Emissions Disclaimer: This product does not require a CARB EO# (Vehicle does not exist in U.S.). All aFe exhaust systems are engineered and manufactured in our Corona, California facility.

aFe is proud to introduce the aFe ELITE cat-back exhaust system for the 2005-2012 Porsche Boxster S (987.1 & 987.2) with H6-3.4L engine that uses the OE tip. In recent testing with the OE tip, this exhaust system resulted in a max gain of 22 horsepower and 30 lbs. x ft. of torque. aFe spent countless hours of R& D to develop the perfect balance of pure, race-inspired performance and in-cabin driving comfort and excitement of exhaust sound and tone during normal cruising or aggressive hard throttle. This exhaust system comes with a brushed finish and is 100% hand TIG-Welded for a perfect, precise fit and a easy bolt-on installation. No modifications necessary.This Part Fits: Year Make Model Submodel 2005-2012 Porsche Boxster Base 2008 Porsche Boxster Limited Edition 2008 Porsche Boxster RS 60 Spyder 2005-2012 Porsche Boxster S 2012 Porsche Boxster S Black Edition 2008 Porsche Boxster S Limited Edition 2009 Porsche Boxster S Porsche Design 2 2011-2012 Porsche Boxster Spyder 2007-2008 Porsche Cayman Base 2006-2008 Porsche Cayman S

This system is constructed of 2.5 in. diameter, mandrel bent, TIG-welded, 304 stainless steel, brushed finish tubing and uses all factory mounting locations for an approximate 1 hour install time. In recent testing, this exhaust system produced 12 horsepower and 11 lbs. x ft. of torque. This unique system utilizes 3.5 in. diameter 304 polished laser etched quad tips that fit perfectly in your stock bumper cutouts. All aFe systems are engineered and manufactured in our Corona, California manufacturing facility.This Part Fits: Year Make Model Submodel 2008-2013 BMW M3 Base

The new MACH Force XP exhaust is engineered to perform in the most extreme environments. This system is constructed from mandrel bent 4 in. 409 stainless steel tubing for maximum flow; increased horsepower; increased torque; and lower EGTs. MACH Force XP exhaust systems are the perfect combination of performance; fit; and value. All systems use factory mounting locations providing stability and hassle-free installation. High quality OE style band clamps are used for a complete 360 deg. sealing surface. A free-flowing 24 in. long muffler is used to absorb high pitch tones producing a powerful sound and unleashing all available horsepower and torque out of your rig. OE style bayonet hangers are used to maintain a stable pipe location during high vibration and high heat conditions. The bayonet tip holds the hanger bushing in place for an OE style fit that does not change with time.This Part Fits: Year Make Model Submodel 2009-2014 Audi A4 Base 2009 Audi A4 Cabriolet 2015-2016 Audi A4 Premium 2015-2016 Audi A4 Premium Plus 2015 Audi A4 Prestige 2013-2014 Audi A4 Quattro Base

This MACH Force-Xp Cat-Back exhaust system is constructed of 2-1/2" mandrel-bent stainless steel tubing and comes complete with free-flowing stainless steel, high temp black powder-coated muffler, OE style bayonet hangers, band clamps and necessary hardware for a hassle-free installation. The smooth curves and increased diameter of this exhaust system helps remove restriction and keeps exhaust gas flowing smoothly for increased horsepower and torque. This system produced +11 horsepower and +22 lbs. x Ft. (*Dyno results from 49-36115-B/P) of torque over the stock exhaust system verified by our in house dyno. The system is finished off with a side exit 4" dia. high luster, polished, stainless steel tip with laser-etched aFe Power logo for an aggressive style. Installation is a Snap This MACH Force-Xp exhaust system use all factory mounting locations providing stability and a hassle-free installation. Leak-Free Seal: High quality OE-style flange and premium band clamps are used for a complete 360-degree sealing surface eliminating leak paths. Aggressive Sound: A free-flowing stainless steel, high temp black powder-coated 22" length muffler is used to absorb high pitch tones producing a powerful sound and unleashing all available horsepower and torque. Perfect Fit: OE-style bayonet hangers are used to maintain a stable pipe location during high vibration and high heat conditions. The bayonet tip holds the hanger bushing in place for an OE-style fit that does not change with time.

aFe is proud to introduce the MACH Force-Xp Cat-Back exhaust system. This exhaust system outflows the factory exhaust. This cat-back exhaust is constructed of 3" mandrel-bent 409 stainless steel tubing and comes complete with free-flowing muffler, OE-style bayonet hangers, band clamps and necessary hardware for a hassle-free installation. The smooth curves and increased diameter of this exhaust system helps remove restriction and keeps exhaust gas flowing smoothly for increased horsepower and torque. The system is finished off with dual gloss black 304 stainless steel, single wall slash cut tips for an aggressive style. Installation is a Snap: This MACH Force-Xp exhaust system use all factory mounting locations providing stability and a hassle-free installation. Leak-Free Seal: High quality band clamps are used for a complete 360-degree sealing surface eliminating leak paths. Aggressive Sound: A free-flowing stainless steel muffler is used to absorb high pitch tones producing a powerful sound and unleashing all available horsepower and torque. Perfect Fit: OE-style bayonet hangers are used to maintain a stable pipe location during high vibration and high heat conditions. The Bayonet tip holds the hanger bushing in place for an OE style fit that does not change with time.This Part Fits: Year Make Model Submodel 2017-2020 Ford F-150 Raptor

The new MACH Force XP exhaust is engineered to perform in the most extreme environments. This system is constructed from mandrel bent 4 in. 409 stainless steel tubing for maximum flow; increased horsepower; increased torque; and lower EGTs. MACH Force XP exhaust systems are the perfect combination of performance; fit; and value. All systems use factory mounting locations providing stability and hassle-free installation. High quality OE style band clamps are used for a complete 360 deg. sealing surface. A free-flowing 24 in. long muffler is used to absorb high pitch tones producing a powerful sound and unleashing all available horsepower and torque out of your rig. OE style bayonet hangers are used to maintain a stable pipe location during high vibration and high heat conditions. The bayonet tip holds the hanger bushing in place for an OE style fit that does not change with time.This Part Fits: Year Make Model Submodel 2011-2014 Ford F-150 FX2 2011-2014 Ford F-150 FX4 2011-2014 Ford F-150 King Ranch 2011-2014 Ford F-150 Lariat 2013-2014 Ford F-150 Limited 2011-2014 Ford F-150 Platinum 2011-2014 Ford F-150 XL 2011-2014 Ford F-150 XLT

Aggressive Sound: A free-flowing, transverse muffler is used to absorb high pitch tones producing a powerful sound and unleashing all available horsepower and torque. The muffler is finished with a high-temp powder-coated black finish and a stamped aFe power logo. Simple Installation: This MACH Force-Xp cat-back exhaust system uses factory mounting locations providing stability and a hassle-free installation. Leak-Free Seal: High quality band clamps are used for a complete 360 degree sealing surface. 304 SS Construction: The performance axle-back exhaust system is constructed of 2-1/2" mandrel-bent, 304 stainless steel tubing for maximum performance, corrosion resistance and strength eliminating cracking. Dual 3" Polished Tips: Finishing off this system are dual 3" diameter, polished, 304 stainless steel tips. The tips come with a laser-etched aFe power logo for an aggressive style.This Part Fits: Year Make Model Submodel 1996-1999 BMW M3 Base

The new MACH Force XP exhaust is engineered to perform in the most extreme environments. This system is constructed from mandrel bent 4 in. 409 stainless steel tubing for maximum flow; increased horsepower; increased torque; and lower EGTs. MACH Force XP exhaust systems are the perfect combination of performance; fit; and value. All systems use factory mounting locations providing stability and hassle-free installation. High quality OE style band clamps are used for a complete 360 deg. sealing surface. A free-flowing 24 in. long muffler is used to absorb high pitch tones producing a powerful sound and unleashing all available horsepower and torque out of your rig. OE style bayonet hangers are used to maintain a stable pipe location during high vibration and high heat conditions. The bayonet tip holds the hanger bushing in place for an OE style fit that does not change with time.This Part Fits: Year Make Model Submodel 2011-2014 Ford F-150 FX2 2011-2014 Ford F-150 FX4 2011-2014 Ford F-150 King Ranch 2011-2014 Ford F-150 Lariat 2013-2014 Ford F-150 Limited 2011-2014 Ford F-150 Platinum 2011-2014 Ford F-150 XL 2011-2014 Ford F-150 XLT

Exhaust Valve: This axle-back exhaust system incorporates a factory style exhaust valve which uses the factory exhaust valve motor (not included). The valve helps regulate, direct and control the flow of exhaust gases by opening, closing, or partially obstructing passageways depending on throttle position for maximum performance. Simple Installation; This MACH Force-Xp axle-back exhaust system uses factory mounting locations providing stability and a hassle-free installation. Dual 4" Gloss Black Tips; Finishing off this system are dual 4" diameter, gloss black, 304 stainless steel tips. The tips come with a laser-etched aFe power logo for an aggressive style. Leak-Free Seal: High quality band clamps are used for a complete 360 degree sealing surface. Brushed 304 SS Construction: The performance axle-back exhaust system is constructed of 3" to 2-1/2" mandrel-bent, brushed 304 stainless steel tubing for maximum performance, corrosion resistance and strength eliminating cracking.This Part Fits: Year Make Model Submodel 2012-2015 BMW 335i Base 2012-2015 BMW 335i xDrive Base 2014-2016 BMW 435i Base 2014-2016 BMW 435i xDrive Base

Exhaust Valve: This axle-back exhaust system incorporates a factory style exhaust valve which uses the factory exhaust valve motor (not included). The valve helps regulate, direct and control the flow of exhaust gases by opening, closing, or partially obstructing passageways depending on throttle position for maximum performance. Simple Installation; This MACH Force-Xp axle-back exhaust system uses factory mounting locations providing stability and a hassle-free installation. Dual 4" Polished Tips; Finishing off this system are dual 4" diameter, polished, 304 stainless steel tips. The tips come with a laser-etched aFe power logo for an aggressive style. Leak-Free Seal: High quality band clamps are used for a complete 360 degree sealing surface. Brushed 304 SS Construction: The performance axle-back exhaust system is constructed of 3" to 2-1/2" mandrel-bent, brushed 304 stainless steel tubing for maximum performance, corrosion resistance and strength eliminating cracking.This Part Fits: Year Make Model Submodel 2012-2015 BMW 335i Base 2012-2015 BMW 335i xDrive Base 2014-2016 BMW 435i Base 2014-2016 BMW 435i xDrive Base

Aggressive Sound: A free-flowing, transverse muffler is used to absorb high pitch tones producing a powerful sound and unleashing all available horsepower and torque. The muffler is finished with a high-temp powder-coated black finish and a stamped aFe power logo. Exhaust Valve: This -catback exhaust system incorporates a factory style exhaust valve which uses the factory exhaust valve motor (not included). The valve helps regulate, direct and control the flow of exhaust gases by opening, closing, or partially obstructing passageways depending on throttle position for maximum performance. Simple Installation: This MACH Force-Xp cat-back exhaust system uses factory mounting locations providing stability and a hassle-free installation. Dual 4" Gloss Black Tips: Finishing off this system are dual 4" diameter, gloss black, 304 stainless steel tips. The tips come with a laser-etched aFe power logo for an aggressive style. Leak-Free Seal: High quality band clamps are used for a complete 360 degree sealing surface. Brushed 304 SS Construction: The performance cat-back exhaust system is constructed of 3" to 2-1/2" mandrel-bent, brushed 304 stainless steel tubing for maximum performance, corrosion resistance and strength eliminating cracking.This Part Fits: Year Make Model Submodel 2016-2018 BMW 340i Base 2017-2019 BMW 340i GT xDrive Base 2016-2018 BMW 340i xDrive Base 2017-2020 BMW 440i Base 2017-2020 BMW 440i Gran Coupe Base 2017-2020 BMW 440i xDrive Base 2017-2020 BMW 440i xDrive Gran Coupe Base

This cat-back exhaust system is constructed of 3 IN - 2-1/2 IN mandrel-bent brushed finished 304 stainless steel tubing for maximum strength and durability. This system features a high-flow stainless steel muffler, producing a mild sound. Muffler finish may vary. Finishing off this exhaust system are quad 4 IN diameter black 304 stainless steel exhaust tips. The tips features a laser etched aFe POWER logo for a unique style. This system produces an aggressive sound unleashing all available horsepower and torque. Requires cutting factory exhaust. Utilizing factory style hangers this system mounts directly to factory mounting locations for a hassle-free installation. This system incorporates a factory style exhaust valve which use the factory exhaust valve motor (not included). The valve helps regulate, direct and control the flow of exhaust gases by opening, closing, or partially obstructing passageways depending on throttle position for maximum performance. A mitered merge collector is used to decrease turbulence and increase exhaust velocity resulting in increased horsepower, torque and improved throttle response. State-of-the-art computer-aided design technology is utilized for precise vehicle fitment. 100% TIG-Welded for race-proven strength and durability.This Part Fits: Year Make Model Submodel 2019-2021 BMW M2 Competition

This cat-back exhaust system is constructed of 3 IN - 2-1/2 IN mandrel-bent 304 stainless steel tubing for maximum strength and durability. This system features a high-flow stainless steel muffler, producing an aggressive sound. Muffler finish may vary. Finishing off this exhaust system are quad 4 IN diameter carbon fiber 304 stainless steel clamp-on exhaust tips. The tips features an aFe POWER logo for a unique style. This system produces an aggressive sound unleashing all available horsepower and torque. Some cutting may be required, see instruction sheet for further information. Utilizing factory style hangers this system mounts directly to factory mounting locations for a hassle-free installation. A mitered merge x-pipe is used to balance and evenly distribute exhaust pulses traveling through the exhaust system, minimizing exhaust drone and maximizing scavenging. This system incorporates factory style exhaust valves which use the factory exhaust valve motors (not included). The valves help regulate, direct and control the flow of exhaust gases by opening, closing, or partially obstructing passageways depending on throttle position for maximum performance. State-of-the-art computer-aided design technology is utilized for precise vehicle fitment. 100% TIG-Welded for race-proven strength and durability.This Part Fits: Year Make Model Submodel 2021-2024 BMW M3 Base 2021-2024 BMW M3 Competition 2022-2024 BMW M3 Competition xDrive 2024 BMW M3 CS 2021-2024 BMW M4 Base 2021-2024 BMW M4 Competition 2021-2024 BMW M4 Competition xDrive 2023-2024 BMW M4 CSL

The new MACH Force XP exhaust is engineered to perform in the most extreme environments. This system is constructed from mandrel bent 4 in. 409 stainless steel tubing for maximum flow; increased horsepower; increased torque; and lower EGTs. MACH Force XP exhaust systems are the perfect combination of performance; fit; and value. All systems use factory mounting locations providing stability and hassle-free installation. High quality OE style band clamps are used for a complete 360 deg. sealing surface. A free-flowing 24 in. long muffler is used to absorb high pitch tones producing a powerful sound and unleashing all available horsepower and torque out of your rig. OE style bayonet hangers are used to maintain a stable pipe location during high vibration and high heat conditions. The bayonet tip holds the hanger bushing in place for an OE style fit that does not change with time.This Part Fits: Year Make Model Submodel 2011-2014 Ford F-150 FX2 2011-2014 Ford F-150 FX4 2011-2014 Ford F-150 King Ranch 2011-2014 Ford F-150 Lariat 2013-2014 Ford F-150 Limited 2011-2014 Ford F-150 Platinum 2011-2014 Ford F-150 XL 2011-2014 Ford F-150 XLT

This MACH Force-Xp Cat-Back exhaust system is constructed of 3" mandrel-bent stainless steel tubing and comes complete with free-flowing high temp black powder-coated muffler, OE style bayonet hangers, band clamps and necessary hardware for a hassle-free installation. The smooth curves and increased diameter of this exhaust system helps remove restriction and keeps exhaust gas flowing smoothly for increased horsepower and torque. Hi-Tuck: This exhaust system is finished off with a Hi-Tuck that is developed to give you extra clearance during extreme angle climbs or descents. Installation is a Snap: This MACH Force-Xp uses all factory mounting locations providing stability and a hassle-free installation. Leak-Free Seal: High quality OE-style flange and premium band clamps are used for a complete 360-degree sealing surface eliminating leak paths. Aggressive Sound: A free-flowing stainless steel high temp black powder-coated 22" length muffler is used to absorb high pitch tones producing a powerful sound and unleashing all available horsepower and torque. Perfect Fit: OE-style bayonet hangers are used to maintain a stable pipe location during high vibration and high heat conditions. The bayonet tip holds the hanger bushing in place for an OE-style fit that does not change with time.This Part Fits: Year Make Model Submodel 2015-2019 Mini Cooper John Cooper Works 2014-2024 Mini Cooper S

The Mach Force XP cat-back exhaust system produces 11 hp and 10 lbs./ft. of torque. constructed from 2.75 in. mandrel bent 304 hand brushed stainless steel and utilizes a unique crossover pipe that helps to equalize exhaust pressure and tunes the exhaust pulse. Comes with dual 3.5 in. polished 304 stainless steel tips and muffler to build a mellow yet powerful sound. Engineered and manufactured in our Corona Ca manufacturing facility. All systems use factory mounting locations providing stability and hassle-free installation. High quality band clamps are used for a complete 360 deg. sealing surface. A free flowing muffler is used to absorb high pitch tones producing a powerful sound and unleashing all available horsepower and torque. The crossover balance tube equalizes and evenly distributes exhaust pulses traveling through the exhaust system. This not only creates more efficient flow and better performance it also reduces sound decibels ultimately minimizing exhaust drone.This Part Fits: Year Make Model Submodel 2007-2010 BMW 335i Base 2007-2008 BMW 335xi Base