Aggressive Sound: A free-flowing, transverse muffler is used to absorb high pitch tones producing a powerful sound and unleashing all available horsepower and torque. The muffler is finished with a high-temp powder-coated metallic black finish and a stamped aFe power logo. Exhaust Valve: This axle-back exhaust system incorporates a factory style exhaust valve which uses the factory exhaust valve motor (not included). The valve helps regulate, direct and control the flow of exhaust gases by opening, closing, or partially obstructing passageways depending on throttle position for maximum performance. Simple Installation: This MACH Force-Xp axle-back exhaust system uses factory mounting locations providing stability and a hassle-free installation. Quad 3-1/2" Stainless Steel Tips:Finishing off this system are Quad 3-1/2" diameter, 304 stainless steel tips with laser-etched aFe POWER logos. Brushed 304 SS Construction: The performance axle-back exhaust system is constructed of 2-1/2" to 3" mandrel-bent, brushed 304 stainless steel tubing for maximum performance, corrosion resistance and strength eliminating cracking.Installation InstructionsThis Part Fits: Year Make Model Submodel 2015-2018 BMW M3 Base 2015-2020 BMW M4 Base 2019-2020 BMW M4 CS 2016 BMW M4 GTS

Aggressive Sound: A free-flowing, transverse muffler is used to absorb high pitch tones producing a powerful sound and unleashing all available horsepower and torque. The muffler is finished with a high-temp powder-coated metallic black finish and a stamped aFe power logo. Exhaust Valve: This axle-back exhaust system incorporates a factory style exhaust valve which uses the factory exhaust valve motor (not included). The valve helps regulate, direct and control the flow of exhaust gases by opening, closing, or partially obstructing passageways depending on throttle position for maximum performance. Simple Installation: This MACH Force-Xp axle-back exhaust system uses factory mounting locations providing stability and a hassle-free installation. Quad 3-1/2" Stainless Steel Tips:Finishing off this system are Quad 3-1/2" diameter, 304 stainles s steel tips with laser-etched aFe POWER logos. Brushed 304 SS Construction: The performance axle-back exhaust system is constructed of 2-1/2" to 3" mandrel-bent, brushed 304 stainless steel tubing for maximum performance, corrosion resistance and strength eliminating cracking.Installation InstructionsThis Part Fits: Year Make Model Submodel 2015-2018 BMW M3 Base 2015-2020 BMW M4 Base 2019-2020 BMW M4 CS 2016 BMW M4 GTS

Unleash power and sound while improving the looks on your M3 Coupe with this MACH Force-Xp cat back system by aFe POWER. The larger diameter, mandrel-bent tubing along with high-flow stainless steel mufflers optimize the sound and looks of your vehicle. This 100% hand TIG-welded system offers proven the quality and durability found in aFe POWER products, and is finished off with four massive 3" stainless steel exhaust tips with laser-etched logos.This Part Fits: Year Make Model Submodel 2001-2006 BMW M3 Base

Turn up your exhaust note while maintaining a mild interior sound level. This 304 stainless steel cat-back system features a unique X-pipe and crossover balance tube design to improve flow, sound and performance.This Part Fits: Year Make Model Submodel 2015-2017 Chrysler 300 C 2015-2017 Chrysler 300 C Platinum 2015-2020 Chrysler 300 Limited 2015-2023 Chrysler 300 S 2018-2023 Chrysler 300 Touring 2018-2023 Chrysler 300 Touring L 2018-2023 Dodge Charger GT 2018 Dodge Charger GT Plus 2015-2023 Dodge Charger Pursuit 2015-2017 Dodge Charger SE 2015-2023 Dodge Charger SXT 2018 Dodge Charger SXT Plus 2018 Dodge Charger SXT Plus Leather

MACH Force-Xp 304 Stainless Steel Cat-Back Exhaust System w/ Black Tip Ford Explorer ST 20-24 V6-3.0L (tt)This Part Fits: Year Make Model Submodel 2021-2024 Ford Explorer King Ranch 2020-2024 Ford Explorer Platinum 2020-2024 Ford Explorer ST 2020-2023 Lincoln Aviator Base 2020-2024 Lincoln Aviator Black Label 2020-2021 Lincoln Aviator Grand Touring 2022-2024 Lincoln Aviator Livery 2024 Lincoln Aviator Premiere 2020-2024 Lincoln Aviator Reserve

MACH Force-Xp 304 Stainless Steel Cat-Back Exhaust System w/ Polished Tip Ford Explorer ST 20-24 V6-3.0L (tt)This Part Fits: Year Make Model Submodel 2021-2024 Ford Explorer King Ranch 2020-2024 Ford Explorer Platinum 2020-2024 Ford Explorer ST 2020-2023 Lincoln Aviator Base 2020-2024 Lincoln Aviator Black Label 2020-2021 Lincoln Aviator Grand Touring 2022-2024 Lincoln Aviator Livery 2024 Lincoln Aviator Premiere 2020-2024 Lincoln Aviator Reserve

Add power, sound and unique style to your BMW X5/X6 M with this cat-back system which produced gains of up to +20 horsepower and +33 lbs. x ft. torque as measured on our in-house dyno. Dual 3" to 2-1/2" mandrel-bent, brush finished 304 stainless steel tubing keeps exhaust flowing smoothly for power gains you can feel. Designed with a transverse, high flow muffler finished in high temp powder coating for long lasting good looks and unique sound. The factory exhaust valve motor is used to regulate the exhaust flow from a closed-valve, sporty tone to wide-open, aggressive, performance sound.This Part Fits: Year Make Model Submodel 2015-2018 BMW X5 M 2015-2019 BMW X6 M

Add power, sound and unique style to your BMW X5/X6 M with this aFe Power cat-back system which produced gains of up to +15 horsepower and +23 lbs. x ft. torque as measured on our in-house dyno. Dual 3" to 2-1/2" mandrel-bent, TIG welded, brush finished 304 stainless steel tubing keeps exhaust flowing smoothly for power gains you can feel. The factory exhaust valve motor is used to regulate the exhaust flow from a closed-valve, aggressive tone to wide-open, competition sound.This Part Fits: Year Make Model Submodel 2015-2018 BMW X5 M 2015-2019 BMW X6 M

Add more power and sound to your Challenger with this MACH Force-Xp cat-back system. Dual 3" mandrel-bent, MIG welded, 304 stainless steel tubing with x-pipe and crossover balance tube keeps exhaust flowing smoothly and evenly for power gains you can feel and hear. This system utilizes spherical clamps to retain the factory tips for a stock appearance. Dual stainless steel, high flow mufflers finished in high temp powder coating deliver an aggressive, performance exhaust note.This Part Fits: Year Make Model Submodel 2015-2016 Dodge Challenger R/T 2015-2016 Dodge Challenger R/T Plus 2016 Dodge Challenger R/T Plus Shaker 2016 Dodge Challenger R/T Shaker

This system produced gains of up to +7 HP and +5 lbs. x Ft. TQ., as measured on our in-house dyno. This cat-back exhaust system is constructed of 3 IN to 2-1/2 IN mandrel-bent brushed finished 304 stainless steel tubing for maximum strength and durability. This system produces an aggressive sound unleashing all available horsepower and torque. Finishing off this exhaust system are quad 4-1/2 IN diameter carbon fiber stainless steel clamp-on exhaust tips. The tips features an aFe POWER logo for a unique style. Utilizing factory style flanges and hangers this system is a direct bolt-on system, which requires no cutting or modifications for a hassle-free installation. This cat-back exhaust system uses a heavy duty flex pipe with an internal interlock liner for added strength and durability. A mitered merge x-pipe is used to balance and evenly distribute exhaust pulses traveling through the exhaust system, minimizing exhaust drone and maximizing scavenging. This cat-back exhaust system incorporates factory style NPP dual mode & AFM (active fuel management) exhaust valves which use the factory exhaust valve motors (not included). The valves helps regulate, direct and control the flow of exhaust gases by opening, closing, or partially obstructing passageways depending on throttle position for maximum performance. Utilizing state-of-the-art computer-aided design technology, this exhaust system is designed for custom, high tolerance factory fitment. 100% TIG-Welded for race-proven strength and durability. This item will only fit vehicles equipped Z51 Performance Package or the factory performance exhaust upgrade that include NPP dual-mode exhaust valve. This item is not recommended for track use.This Part Fits: Year Make Model Submodel 2024-2025 Chevrolet Corvette E-Ray 2020-2025 Chevrolet Corvette Stingray

This system produced gains of up to +7 HP and +5 lbs. x Ft. TQ., as measured on our in-house dyno. This cat-back exhaust system is constructed of 3 IN to 2-1/2 IN mandrel-bent brushed finished 304 stainless steel tubing for maximum strength and durability. This system produces an aggressive sound unleashing all available horsepower and torque. Finishing off this exhaust system are quad 4-1/2 IN diameter polished stainless steel clamp-on exhaust tips. The tips features a laser etched aFe POWER logo for a unique style. Utilizing factory style flanges and hangers this system is a direct bolt-on system, which requires no cutting or modifications for a hassle-free installation. This cat-back exhaust system uses a heavy duty flex pipe with an internal interlock liner for added strength and durability. A mitered merge x-pipe is used to balance and evenly distribute exhaust pulses traveling through the exhaust system, minimizing exhaust drone and maximizing scavenging. This cat-back exhaust system incorporates factory style NPP dual mode & AFM (active fuel management) exhaust valves which use the factory exhaust valve motors (not included). The valves helps regulate, direct and control the flow of exhaust gases by opening, closing, or partially obstructing passageways depending on throttle position for maximum performance. Utilizing state-of-the-art computer-aided design technology, this exhaust system is designed for custom, high tolerance factory fitment. 100% TIG-Welded for race-proven strength and durability.This Part Fits: Year Make Model Submodel 2024-2025 Chevrolet Corvette E-Ray 2020-2025 Chevrolet Corvette Stingray

Advanced Flow Engineering, Inc. (aFe) produces high flow, high performance air filters & intake systems for the automotive industry. Founded in April, 1999, aFe was created to address an obvious need in the automotive aftermarket industry: a lack of choice for a high performance aftermarket air filter. We are a team of engineers, machinists, production and sales people who believe in the product we design. We each have years of experience in our respective positions and together work to ensure that we have the best product on the market. Our purpose was not just to be another vendor that offers air filters, we chose to pay attention to those finer details that set an aFe filter apart from the competition. We currently offer aftermarket air filters for passenger cars, light trucks and SUVs. We also have many applications for round racing and universal clamp-on filters. To find you r particular application, please use our new search engines. If you do not see your particular application listed, please contact us.This Part Fits: Year Make Model Submodel 2007-2014 Toyota FJ Cruiser Base 2008 Toyota FJ Cruiser Trail Teams Special Edition 2007 Toyota FJ Cruiser TRD Special Edition

Advanced Flow Engineering, Inc. (aFe) produces high flow, high performance air filters & intake systems for the automotive industry. Founded in April, 1999, aFe was created to address an obvious need in the automotive aftermarket industry: a lack of choice for a high performance aftermarket air filter. We are a team of engineers, machinists, production and sales people who believe in the product we design. We each have years of experience in our respective positions and together work to ensure that we have the best product on the market. Our purpose was not just to be another vendor that offers air filters, we chose to pay attention to those finer details that set an aFe filter apart from the competition. We currently offer aftermarket air filters for passenger cars, light trucks and SUVs. We also have many applications for round racing and universal clamp-on filters. To find your particular application, please use our new search engines. If you do not see your particular application listed, please contact us.This Part Fits: Year Make Model Submodel 2007-2014 Toyota FJ Cruiser Base 2008 Toyota FJ Cruiser Trail Teams Special Edition 2007 Toyota FJ Cruiser TRD Special Edition

aFe POWER MACH Force-Xp cat-back exhaust system is constructed of 3 IN mandrel-bent 304 stainless steel tubing for maximum strength and durability. This system features high-flow 304 stainless steel mufflers and produces an aggressive sound. A mitered merge X-pipe is used to balance and evenly distribute exhaust pulses traveling, minimizing exhaust drone and maximizing scavenging. The crossover tube balances distribution of exhaust pulses resulting reduced drone, and improving sound. This system includes factory style exhaust valves which require the remounding of the factory exhaust valve motors. These valves help regulate, direct and control the flow and back-pressure for maximum performance. Utilizing factory style hangers this system is a direct bolt-on system, which requires no cutting or modifications for a hassle-free installation., and is 100% MIG-Welded for race proven strength and durability.This Part Fits: Year Make Model Submodel 2018-2022 Dodge Challenger SRT Hellcat Widebody 2023 Dodge Challenger SRT Hellcat Widebody Jailbreak 2017-2018 Dodge Charger Daytona 392 2017-2018 Dodge Charger R/T 392 2015-2018 Dodge Charger R/T Scat Pack 2019-2023 Dodge Charger Scat Pack 2020 Dodge Charger Scat Pack 392 Widebody 2022-2023 Dodge Charger Scat Pack Widebody 2015-2018 Dodge Charger SRT 392 2015-2020 Dodge Charger SRT Hellcat 2020-2023 Dodge Charger SRT Hellcat Widebody

aFe POWER MACH Force-Xp cat-back exhaust system is constructed of 3 IN mandrel-bent 304 stainless steel tubing for maximum strength and durability. This system is a muffler-less system and produces an aggressive sound. A mitered merge X-pipe is used to balance and evenly distribute exhaust pulses traveling, minimizing exhaust drone and maximizing scavenging. The crossover tube balances distribution of exhaust pulses resulting reduced drone, and improving sound. This system includes factory style exhaust valves which require the remounding of the factory exhaust valve motors. These valves help regulate, direct and control the flow and back-pressure for maximum performance. Utilizing factory style hangers this system is a direct bolt-on system, which requires no cutting or modifications for a hassle-free installation., and is 100% MIG-Welded for race proven strength and durability.This Part Fits: Year Make Model Submodel 2018-2022 Dodge Challenger SRT Hellcat Widebody 2023 Dodge Challenger SRT Hellcat Widebody Jailbreak 2017-2018 Dodge Charger Daytona 392 2017-2018 Dodge Charger R/T 392 2015-2018 Dodge Charger R/T Scat Pack 2019-2023 Dodge Charger Scat Pack 2020 Dodge Charger Scat Pack 392 Widebody 2022-2023 Dodge Charger Scat Pack Widebody 2015-2018 Dodge Charger SRT 392 2015-2020 Dodge Charger SRT Hellcat 2020-2023 Dodge Charger SRT Hellcat Widebody

The aFe MACH Force-Xp cat-back exhaust system exceeds your quality and performance expectations. Mandrel bent 304 stainless steel tubing and high flow transverse muffler offers maximum exhaust flow and incorporates a factory style exhaust valve to control the exhaust note. The valve utilizes the factory valve motor and factory performance modes. When closed, it directs the exhaust through the high flow muffler for a smooth, tuned exhaust note. When opened, the exhaust is allowed to bypass the muffler and unleash sound and performance. Large diameter stainless steel exhaust tips come with a laser-etched aFe POWER logo for a stylish finish.This Part Fits: Year Make Model Submodel 2012-2015 BMW 335i Base 2014-2016 BMW 435i Base

The aFe MACH Force-Xp cat-back exhaust system exceeds your quality and performance expectations. Mandrel bent 304 stainless steel tubing and high flow transverse muffler offers maximum exhaust flow and incorporates a factory style exhaust valve to control the exhaust note. The valve utilizes the factory valve motor and factory performance modes. When closed, it directs the exhaust through the high flow muffler for a smooth, tuned exhaust note. When opened, the exhaust is allowed to bypass the muffler and unleash sound and performance. Large diameter stainless steel exhaust tips come with a laser-etched aFe POWER logo for a stylish finish.This Part Fits: Year Make Model Submodel 2012-2015 BMW 335i Base 2014-2016 BMW 435i Base

Now your 2019 Dodge Ram 5.7 HEMI can perform and sound as good as it looks with this MACH Force Xp cat-back exhaust system. In-house dyno testing produced gains of up to +22 horsepower and +26 lbs. x ft. torque for towing, track and street performance. 3" mandrel bent, 409 stainless steel tubing and high-flow, muffler improve performance across the power band and delivers a deep, aggressive exhaust tone. 100% MIG-welded for strength and durability and long lasting, good looks, this system is finished with dual, 5" polished stainless steel tips with aFe Power logo badging for a unique, custom appearance.This Part Fits: Year Make Model Submodel 2019-2024 Ram 1500 Big Horn 2019-2024 Ram 1500 Laramie 2019-2021 Ram 1500 Laramie Longhorn 2019-2024 Ram 1500 Limited 2021-2024 Ram 1500 Limited Longhorn 2019-2024 Ram 1500 Lone Star 2021 Ram 1500 Longhorn 2019-2024 Ram 1500 Rebel 2020-2021 Ram 1500 Special Service 2019-2024 Ram 1500 Tradesman

Now your 2019 Dodge Ram 5.7 HEMI can perform and sound as good as it looks with this MACH Force Xp cat-back exhaust system. In-house dyno testing produced gains of up to +22 horsepower and +26 lbs. x ft. torque for towing, track and street performance. 3" mandrel bent, 409 stainless steel tubing and high-flow, muffler improve performance across the power band and delivers a deep, aggressive exhaust tone. 100% MIG-welded for strength and durability and long lasting, good looks, this system is finished with dual, 5" polished stainless steel tips with aFe Power logo badging for a unique, custom appearance.This Part Fits: Year Make Model Submodel 2019-2024 Ram 1500 Big Horn 2019-2024 Ram 1500 Laramie 2019-2021 Ram 1500 Laramie Longhorn 2019-2024 Ram 1500 Limited 2021-2024 Ram 1500 Limited Longhorn 2019-2024 Ram 1500 Lone Star 2021 Ram 1500 Longhorn 2019-2024 Ram 1500 Rebel 2020-2021 Ram 1500 Special Service 2019-2024 Ram 1500 Tradesman

This Rebel Series cat-back exhaust delivers power and sound by adding horsepower and torque as measured on our in-house dyno. Dual polished tips exit in front of the rear passenger side tire to make this system look as good as it performs. Factory mounting locations provide a stable and hassle-free installation.This Part Fits: Year Make Model Submodel 2017-2022 Chevrolet Colorado LT 2017-2022 Chevrolet Colorado WT 2017-2022 Chevrolet Colorado Z71 2017-2022 Chevrolet Colorado ZR2 2018-2020 GMC Canyon All Terrain 2021-2022 GMC Canyon AT4 2017-2020 GMC Canyon Base 2017-2022 GMC Canyon Denali 2021-2022 GMC Canyon Elevation 2021-2022 GMC Canyon Elevation Standard 2017-2020 GMC Canyon SLE 2017-2020 GMC Canyon SLT

The new MACH Force XP exhaust is engineered to perform in the most extreme environments. This system is constructed from mandrel bent 4 in. 409 stainless steel tubing for maximum flow; increased horsepower; increased torque; and lower EGTs. MACH Force XP exhaust systems are the perfect combination of performance; fit; and value. All systems use factory mounting locations providing stability and hassle-free installation. High quality OE style band clamps are used for a complete 360 deg. sealing surface. A free-flowing 24 in. long muffler is used to absorb high pitch tones producing a powerful sound and unleashing all available horsepower and torque out of your rig. OE style bayonet hangers are used to maintain a stable pipe location during high vibration and high heat conditions. The bayonet tip holds the hanger bushing in place for an OE style fit that does not change with time.This Part Fits: Year Make Model Submodel 2016 Chevrolet Silverado 1500 Custom 2015-2018 Chevrolet Silverado 1500 LS 2009-2018 Chevrolet Silverado 1500 LT 2013 Chevrolet Silverado 1500 LTZ 2009-2018 Chevrolet Silverado 1500 WT 2014-2018 GMC Sierra 1500 Base 2014-2018 GMC Sierra 1500 Denali 2010-2013 GMC Sierra 1500 SL 2009-2018 GMC Sierra 1500 SLE 2009-2018 GMC Sierra 1500 SLT 2009-2013 GMC Sierra 1500 WT 2010-2013 GMC Sierra 1500 XFE

The Mach Force XP cat-back exhaust system produces 11 hp and 10 lbs./ft. of torque. constructed from 2.75 in. mandrel bent 304 hand brushed stainless steel and utilizes a unique crossover pipe that helps to equalize exhaust pressure and tunes the exhaust pulse. Comes with dual 3.5 in. polished 304 stainless steel tips and muffler to build a mellow yet powerful sound. Engineered and manufactured in our Corona Ca manufacturing facility. All systems use factory mounting locations providing stability and hassle-free installation. High quality band clamps are used for a complete 360 deg. sealing surface. A free flowing muffler is used to absorb high pitch tones producing a powerful sound and unleashing all available horsepower and torque. The crossover balance tube equalizes and evenly distributes exhaust pulses traveling through the exhaust system. This not only creates more efficient flow and better performance it also reduces sound decibels ultimately minimizing exhaust drone.This Part Fits: Year Make Model Submodel 2009-2015 Cadillac CTS V

Undoubtedly, your Ford Raptor with the V6-3.5L (tt) EcoBoost is fully capable of handling anything you can throw at it. Now you can maximize your Raptor's full power, sound and style potential with aFe's MACH Force-Xp cat-back exhaust system. Constructed of 3" and 3 1/2" mandrel-bent, 304 stainless steel tubing, the MACH Force-Xp is 100% hand MIG-welded by certified craftsmen for race proven strength and durability for the long haul and uses factory style flanges and hanger locations for a secure, leak-free seal and hassle-free Install. aFe's 7" round x 24" long, free-flowing muffler is high-temp powder-coated metallic-black to improve performance across the Raptor's power band while delivering a powerful, aggressive tone. This dual rear-exit system is finished off with 4-1/2" polished, angle-cut, rolled stainless steel exhaust tips with laser-cut aFe POWER badge for a custom-styled look. Dual Y-Merge Assemblies: Evenly distributes exhaust pulses to minimize interior drone and enhance external tone. Aggressive Sound: Free-flowing, stainless steel, black powder-coated 24" length round muffler to absorb high pitch tones producing a powerful sound and unleashing more horsepower and t orque potential. Dual 4-1/2" stainless steel exhaust tips: This dual rear-exit system features 4-1/2" dia. polished, angle-cut rolled 304 stainless steel exhaust tips w/ laser-cut aFe POWER badge for a custom-styled look. Installation is a snap: This MACH Force-Xp exhaust system uses all factory mounting locations providing stability and a hassle-free installation. Perfect Fit: OE-style bayonet hangers are used to maintain a stable pipe location during any driving conditions. The bayonet tip holds the hanger bushing in place for an OE style, long lasting fit. Leak-Free Seal: High quality band clamps are used for a complete 360-degree sealing surface.This Part Fits: Year Make Model Submodel 2017-2020 Ford F-150 Limited 2017-2020 Ford F-150 Raptor

This MACH Force XP Cat-Back exhaust system is constructed of 3 IN mandrel-bent stainless steel tubing and comes complete with free-flowing muffler, OE style bayonet hangers, band clamps and all hardware necessary for a hassle-free installation. The smooth curves and increased diameter of this exhaust system helps remove restriction and keeps exhaust gas flowing smoothly for increased horsepower and torque. This system produced +11 horsepower and +23 lbs. x ft. of torque over the stock exhaust system verified by our in house dyno. This exhaust system is finished off with a Hi-Tuck Tip that is developed to give you extra clearance during extreme angle climbs or descents. This MACH Force XP uses all factory mounting locations providing stability and a hassle-free installation. Leak-Free Seal: High quality OE-style flange and premium band clamps are used for a complete 360-degree sealing surface eliminating leak paths. A straight-through designed, free-flowing stainless steel muffler is used to absorb high pitch tones producing a powerful sound and unleashing all available horsepower and torque. OE-style bayonet hangers are used to maintain a stable pipe location during high vibration and high heat conditions. The bayonet tip holds the hanger bushing in place for an OE-style fit that does not change with time.

aFe is proud to introduce the MACH Force-Xp "Hi-Tuck" Cat-Back exhaust system for the 2017 Ford F-150 Raptor with the V6-3.5L EcoBoost twin-turbo engine. This exhaust system outflows the factory exhaust. This cat-back exhaust is constructed of 3" into 3-1/2" mandrel-bent 304 stainless steel tubing and comes complete with free-flowing high temp metallic black powder-coated muffler, OE-style bayonet hangers, band clamps and necessary hardware for a hassle-free installation. The smooth curves and increased diameter of this exhaust system helps remove restriction and keeps exhaust gas flowing smoothly for increased horsepower and torque. The system is finished off with a dual 304 stainless steel, single wall slash cut tips for an aggressive style. Hi-Tuck: This exhaust system is finished off with Hi-Tuck tips that are developed to give you extra clearance during extreme angle climbs or descents. Gives the truck an "Old School" traditional look. Installation is a Snap: This MACH Force-Xp exhaust system use all factory mounting locations providing stability and a hassle-free installation. Leak-Free Seal: High quality band clamps are used for a complete 360-degree sealing surface eliminating leak paths. Aggressive Sound: A free-flowing stainless steel high temp 24" length muffler is used to absorb high pitch tones producing a powerful sound and unleashing all available horsepower and torque. Dual 4" Tips: Finishing off this system are dual 4" diameter, 304 stainless steel tips. This is a dual rear exit system. Y-Merge Assemblies: The Y-merge assemblies evenly distributes exhaust pulses and minimizes exhaust drone to enhance the tone. Perfect Fit: OE-style bayonet hangers are used to maintain a stable pipe location during high vibration and high heat conditions. The Bayonet tip holds the hanger bushing in place for an OE style fit that does not change with time.This Part Fits: Year Make Model Submodel 2017-2020 Ford F-150 Limited 2017-2020 Ford F-150 Raptor

aFe is proud to introduce the MACH Force-Xp "Hi-Tuck" Cat-Back exhaust system for the 2017 Ford F-150 Raptor with the V6-3.5L EcoBoost twin-turbo engine. This exhaust system outflows the factory exhaust. This cat-back exhaust is constructed of 3" into 3-1/2" mandrel-bent 304 stainless steel tubing and comes complete with free-flowing high temp metallic black powder-coated muffler, OE-style bayonet hangers, band clamps and necessary hardware for a hassle-free installation. The smooth curves and increased diameter of this exhaust system helps remove restriction and keeps exhaust gas flowing smoothly for increased horsepower and torque. The system is finished off with a dual 304 stainless steel, single wall slash cut tips for an aggressive style. Hi-Tuck: This exhaust system is finished off with Hi-Tuck tips that are developed to give you extra clearance during extreme angle climbs or descents. Gives the truck an "Old School" traditional look. Installation is a Snap: This MACH Force-Xp exhaust system use all factory mounting locations providing stability and a hassle-free installation. Leak-Free Seal: High quality band clamps are used for a complete 360-degree sealing surface eliminating leak paths. Aggressive Sound: A free-flowing stainless steel high temp 24" length muffler is used to absorb high pitch tones producing a powerful sound and unleashing all available horsepower and torque. Dual 4" Tips: Finishing off this system are dual 4" diameter, 304 stainless steel tips. This is a dual rear exit system. Y-Merge Assemblies: The Y-merge assemblies evenly distributes exhaust pulses and minimizes exhaust drone to enhance the tone. Perfect Fit: OE-style bayonet hangers are used to maintain a stable pipe location during high vibration and high heat conditions. The Bayonet tip holds the hanger bushing in place for an OE style fit that does not chan ge with time.This Part Fits: Year Make Model Submodel 2017-2020 Ford F-150 Limited 2017-2020 Ford F-150 Raptor

aFe is proud to introduce the MACH Force-Xp "Hi-Tuck" Cat-Back exhaust system for the Ford F-150 Raptor with the V6-3.5L EcoBoost twin-turbo engine. This exhaust system outflows the factory exhaust. This cat-back exhaust is constructed of 3" into 3-1/2" mandrel-bent 304 stainless steel tubing and comes complete with free-flowing high temp metallic black powder-coated muffler, OE-style bayonet hangers, band clamps and necessary hardware for a hassle-free installation. The smooth curves and increased diameter of this exhaust system helps remove restriction and keeps exhaust gas flowing smoothly for increased horsepower and torque. The system is finished off with a dual 304 stainless steel, single wall slash cut tips for an aggressive style. Hi-Tuck: This exhaust system is finished off with Hi-Tuck tips that are developed to give you extra clearance during extreme angle climbs or descents. Gives the truck an "Old School" traditional look. Installation is a Snap: This MACH Force-Xp exhaust system use all factory mounting locations providing stability and a hassle-free installation. Leak-Free Seal: High quality band clamps are used for a complete 360-degree sealing surface eliminating leak paths. Aggressive Sound: A free-flowing stainless steel high temp 24" length muffler is used to absorb high pitch tones producing a powerful sound and unleashing all available horsepower and torque. Dual 4" Tips: Finishing off this system are dual 4" diameter, 304 stainless steel tips. This is a dual rear exit system. Y-Merge Assemblies: The Y-merge assemblies evenly distributes exhaust pulses and minimizes exhaust drone to enhance the tone. Perfect Fit: OE-style bayonet hangers are used to maintain a stable pipe location during high vibration and high heat conditions. The Bayone t tip holds the hanger bushing in place for an OE style fit that does not change with time.This Part Fits: Year Make Model Submodel 2017-2020 Ford F-150 Limited 2017-2020 Ford F-150 Raptor

The new MACH Force XP exhaust is engineered to perform in the most extreme environments. This system is constructed from mandrel bent 4 in. 409 stainless steel tubing for maximum flow; increased horsepower; increased torque; and lower EGTs. MACH Force XP exhaust systems are the perfect combination of performance; fit; and value. All systems use factory mounting locations providing stability and hassle-free installation. High quality OE style band clamps are used for a complete 360 deg. sealing surface. A free-flowing 24 in. long muffler is used to absorb high pitch tones producing a powerful sound and unleashing all available horsepower and torque out of your rig. OE style bayonet hangers are used to maintain a stable pipe location during high vibration and high heat conditions. The bayonet tip holds the hanger bushing in place for an OE style fit that does not change with time.This Part Fits: Year Make Model Submodel 2016-2018 Chevrolet Silverado 1500 Custom 2014-2018 Chevrolet Silverado 1500 High Country 2010-2013,2015-2018 Chevrolet Silverado 1500 LS 2009-2018 Chevrolet Silverado 1500 LT 2009-2018 Chevrolet Silverado 1500 LTZ 2015-2018 Chevrolet Silverado 1500 SSV 2009-2018 Chevrolet Silverado 1500 WT 2010-2013 Chevrolet Silverado 1500 XFE 2019 Chevrolet Silverado 1500 LD Custom 2019 Chevrolet Silverado 1500 LD LT 2019 Chevrolet Silverado 1500 LD WT 2014-2018 GMC Sierra 1500 Base 2014-2018 GMC Sierra 1500 Denali 2010-2013 GMC Sierra 1500 SL 2009-2018 GMC Sierra 1500 SLE 2009-2018 GMC Sierra 1500 SLT 2009-2013 GMC Sierra 1500 WT 2010-2013 GMC Sierra 1500 XFE 2019 GMC Sierra 1500 Limited Base 2019 GMC Sierra 1500 Limited SLE

Unleash power and sound while improving the looks on your M3 Coupe with this MACH Force-Xp cat back system by aFe POWER. The larger diameter, mandrel-bent tubing along with high-flow stainless steel mufflers optimize the sound and looks of your vehicle. This 100% hand TIG-welded system offers proven the quality and durability found in aFe POWER products, and is finished off with four massive 3" stainless steel exhaust tips with laser-etched logos.This Part Fits: Year Make Model Submodel 2001-2006 BMW M3 Base

Performance Gains: This system produced gains of up to +18 HP and +27 lbs. x Ft. TQ., as measured on our in-house dyno.3" - 2-1/2" 304 Stainless Steel Construction: This cat-back exhaust system is constructed of 3" - 2-1/2" mandrel-bent 304 stainless steel tubing for maximum strength and durability.High-Flow Stainless Steel Black Muffler: This system features a high-flow stainless steel black muffler, producing a aggressive sound. The muffler has a black finish for ultimate corrosion resistance.Dual 4" Diameter Black Exhaust Tips: Finishing off this exhaust system are dual 4" diameter black 304 stainless steel clamp-on exhaust tips. The tips features a laser etched aFe POWER logo for a unique style.Installation: Utilizing a factory style flange and hangers this system is a direct bolt-on system, which requires no cutting or modifications for a hassle-free installation.Exhaust Valve: This cat-back exhaust system incorporates a factory style exhaust valve which uses the factory exhaust valve motors (not included). The valve helps regulate, direct and control the flow of exhaust gases by opening, closing, or partially obstructing passageways depending on throttle position for maximum performance.Integrated Mitered Merge Collector: A mitered merge collector is used to decrease turbulence and increase exhaust velocity resulting in increased horsepower, torque and improved throttle response.Computer-Aided Design: Utilizing state-of-the-art computer-aided design technology, this exhaust system is designed for custom, high tolerance factory fitment.MIG-Welded: 100% MIG-Welded for race-proven strength and durability.Emissions Disclaimer: This product does not require a CARB EO#.aFe POWER exhaust systems are engineered and manufactured in our Corona, California facility.This Part Fits: Year Make Model Submodel 2014-2016 BMW 228i Base 2015-2016 BMW 228i xDrive Base 2014-2016 BMW M235i Base 2015-2016 BMW M235i xDrive Base

Introducing the new aFe Power MACH Force XP cat back exhaust system for the 07-13 BMW 328i E92 & E93 non-turbo. In recent testing, this system produced 4 horsepower and 8 lbs. x ft. of torque. This exhaust is constructed from 2.5in. brushed finish, mandrel bent, 304 stainless steel and is TIG-welded. A high flow, 304 stainless steel, single in dual o ut muffler was used to maximize performance across the power band while maintaining a great tone. To finish off this exhaust are dual, aFe laser etched, 3in. polished 304 stainless steel tips. This exhaust uses all factory hanger locations. Note: Cutting is required and should be performed by a skilled technician.This Part Fits: Year Make Model Submodel 2006 BMW 325i Base 2006 BMW 325xi Base 2007-2013 BMW 328i Base 2009-2013 BMW 328i xDrive Base 2007-2008 BMW 328xi Base

Introducing the new aFe Power MACH Force XP dual exhaust system for the 05-09 Ford Mustang V6-4.0L. In recent testing, this system produced 12 horsepower and 16 lbs. x ft. of torque. This exhaust is constructed from 2.5in. mandrel bent, stainless steel and is MIG-welded. Dual high flow, stainless steel, single in, single out mufflers are used to maximize performance across the power band while maintaining a great tone. To finish off this exhaust aFe uses dual, laser etched, 3.5in. polished 304 stainless steel tips. Note: The V8 rear bumper cover is recommended (Ford OE Part Number 5R3Z17K835BAA). The use of the OE V6 bumper cover requires cutting and should be performed by a skilled technician.This Part Fits: Year Make Model Submodel 2005-2009 Ford Mustang Base

The Mach Force XP cat-back exhaust system produces 11 hp and 10 lbs./ft. of torque. constructed from 2.75 in. mandrel bent 304 hand brushed stainless steel and utilizes a unique crossover pipe that helps to equalize exhaust pressure and tunes the exhaust pulse. Comes with dual 3.5 in. polished 304 stainless steel tips and muffler to build a mellow yet powerful sound. Engineered and manufactured in our Corona Ca manufacturing facility. All systems use factory mounting locations providing stability a nd hassle-free installation. High quality band clamps are used for a complete 360 deg. sealing surface. A free flowing muffler is used to absorb high pitch tones producing a powerful sound and unleashing all available horsepower and torque. The crossover balance tube equalizes and evenly distributes exhaust pulses traveling through the exhaust system. This not only creates more efficient flow and better performance it also reduces sound decibels ultimately minimizing exhaust drone.This Part Fits: Year Make Model Submodel 2008-2013 BMW 135i Base

The Mach Force XP cat-back exhaust system produces 11 hp and 10 lbs./ft. of torque. constructed from 2.75 in. mandrel bent 304 hand brushed stainless steel and utilizes a unique crossover pipe that helps to equalize exhaust pressure and tunes the exhaust pulse. Comes with dual 3.5 in. polished 304 stainless steel tips and muffler to build a mellow yet powerful sound. Engineered and manufactured in our Corona Ca manufacturing facility. All systems use factory mounting locations providing stability and hassle-free installation. High quality band clamps are used for a complete 360 deg. sealing surface. A free flowing muffler is used to absorb high pitch tones producing a powerful sound and unleashing all available horsepower and torque. The crossover balance tube equalizes and evenly distributes exhaust pulses traveling through the exhaust system. This not only creates more efficient flow and better performance it also reduces sound decibels ultimately minimizing exhaust drone.This Part Fits: Year Make Model Submodel 2008-2013 BMW 135i Base

aFe is proud to introduce the aFe dual cat-back exhaust system. In recent testing this aFe cat-back exhaust system produced 34 horsepower and 43 lbs. x ft. of torque, furthermore, weighs 20 lbs. less than the stock exhaust. With the iconic 911 already a well-engineered performance driving machine, aFe developed the perfect balance of pure, race-inspired performance while ensuring that perfect sound decibel and exhaust note creates the ultimate driving experience. Starting with a CAD X-Pipe, aFe spent countless hours of R&D to ensure that the volume, flow and balance was no less than perfect. Also, aFes unique brushed finish step mid pipe design unleashes all available power and creates a broad and exciting power band. Included are dual 304 stainless steel light-weight race mufflers and resonators, this straight through design eliminates any restriction and optimizes maximum power and performance with no compromise. Available with 3-1/2 IN polished 304 stainless steel quad tips and CNC-Machined laser-etched tip inserts, this system is hand-crafted and TIG-welded for a perfect, precise fit and 100% complete bolt-on installation. No modifications necessary.This Part Fits: Year Make Model Submodel 2014 Porsche 911 50th Anniversary Edition 2012-2016 Porsche 911 Carrera 2013-2016 Porsche 911 Carrera 4 2015-2016 Porsche 911 Carrera 4 GTS 2013-2016 Porsche 911 Carrera 4S 2015-2016 Porsche 911 Carrera GTS 2012-2016 Porsche 911 Carrera S 2014-2016 Porsche 911 GT3 2016 Porsche 911 Targa 4 GTS 2014-2016 Porsche 911 Targa 4S

aFe is proud to announce the MACH Force-Xp cat-back exhaust system for the 2012-2117 Jeep Grand Cherokee SRT/SRT8 with the V8-6.4L HEMI engine. This exhaust system is constructed out of mandrel-bent 304 stainless steel tubing for unrestricted flow and is MIG-welded for strength and durability. This system utilizes dual, high-flow black mufflers with 3" tubing which improves performance across the power band while maintaining a great tone and aggressive sound during shifting. aFe also has incorporated an X-Pipe to balance and evenly distribute exhaust pulses traveling through the exhaust system. This creates a more efficient flow and better performance. This is a direct bolt-on system which retains your factory exhaust tips and includes necessary hardware for a hassle-free installation. No modifications necessary. Aggressive Sound: Dual free-flowing and high temp black mufflers are used to absorb high pitch tones producing a powerful sound and unleashing all available horsepower and torque. X-Pipe Balance Tube: The equalizer balance tube evenly distributes exhaust pulses traveling through the exhaust system. This creates a more efficient flow and better performance. X-Pipe includes resonators to eliminate unwanted resonance or noise at a particular RPM's. Simple Installation: This is a direct bolt-on system which retains your factory exhaust tips and includes all necessary hardware for a hassle-free installation. No modifications necessary. Leak-Free Seal: High quality band clamps are used for a complete 360 degree sealing surface.This Part Fits: Year Make Model Submodel 2014-2021 Jeep Grand Cherokee SRT 2012-2013 Jeep Grand Cherokee SRT8 2018-2021 Jeep Grand Cherokee Trackhawk