The All-New HPS Performance 827 Series Air Intake Kit (Black, Part # 827-665WB) for 2018-2019 Toyota Camry 2.5L offers a free-flowing 3 inch mandrel-bent aluminum tube induction system designed to produce dyno proven performance gains - increase horsepower +5 whp , torque +8 ft/lbs and improve throttle response while maintaining safe air fuel ratio. The heavy duty powder coated steel heat shield integrates with the factory fresh air scoop to direct cold air to the air filter for the best cooling effect. The included installation manual has clear pictures and instructions to guide the installer throughout the whole process. The kit does NOT require tuning and does not trigger CEL light. No modification is required during the installation. HPS light weight mandrel-bent aluminum alloy tube replaces the stock restrictive air box and optimize the air flow with excellent heat dissipation and long lasting durability. HPS Performance 827 Series air intake kit features race proven reinforced silicone hoses and industrial grade 100% stainless steel T-bolt clamps which ensures reliability, even during the most extreme driving conditions. The All-New HPS Performance Air Filter is designed with performance in mind, delivering excellent filtration without sacrificing air flow. All HPS Performance Air Filter are made in the United States. Fine-tuned by HPS Performance to produce dyno proven performance gains - increase horsepower +5 whp , torque +8 ft/lbs and improve throttle response. Does NOT require tuning after the install. Light weight 3 inch mandrel-bent aluminum alloy piping replaces the stock restrictive air box and optimize the air flow with excellent heat dissipation and long lasting durability. Features HPS Performance race proven reinforced silicone hoses, industrial grade 100% stainless steel T-bolt clamps and Washable/Reusable Performance Air Filter. Heavy duty powder coated steel heat shield integrates with fresh air scoop forces cool air for the best cooling effect. The included installation manual has clear pictures and instructions to guide the installer throughout the whole process. Bolt-on easy installation, no modification. Attributes: GTIN: 00648044889931 Brand Name: HPS Performance Add-On HPS Filter: HPS-4276 Extended Information: Country of Origin: China Emissions : Electronically Announced Life Cycle Status: Available To Order Packing Information: Quantity of Each: 1 Package UOM: EA Dimension: 24 x 12 x 10 inches Weight: 6 lb

The All-New HPS Performance 827 Series Air Intake Kit (Red, Part # 827-665R) for 2018-2019 Toyota Camry 2.5L offers a free-flowing 3 inch mandrel-bent aluminum tube induction system designed to produce dyno proven performance gains - increase horsepower +5 whp , torque +8 ft/lbs and improve throttle response while maintaining safe air fuel ratio. The heavy duty powder coated steel heat shield integrates with the factory fresh air scoop to direct cold air to the air filter for the best cooling effect. The included installation manual has clear pictures and instructions to guide the installer throughout the whole process. The kit does NOT require tuning and does not trigger CEL light. No modification is required during the installation. HPS light weight mandrel-bent aluminum alloy tube replaces the stock restrictive air box and optimize the air flow with excellent heat dissipation and long lasting durability. HPS Performance 827 Series air intake kit features race proven reinforced silicone hoses and industrial grade 100% stainless steel T-bolt clamps which ensures reliability, even during the most extreme driving conditions. The All-New HPS Performance Air Filter is designed with performance in mind, delivering excellent filtration without sacrificing air flow. All HPS Performance Air Filter are made in the United States. Fine-tuned by HPS Performance to produce dyno proven performance gains - increase horsepower +5 whp , torque +8 ft/lbs and improve throttle response. Does NOT require tuning after the install. Light weight 3 inch mandrel-bent aluminum alloy piping replaces the stock restrictive air box and optimize the air flow with excellent heat dissipation and long lasting durability. Features HPS Performance race proven reinforced silicone hoses, industrial grade 100% stainless steel T-bolt clamps and Washable/Reusable Performance Air Filter. Heavy duty powder coated steel heat shield integrates with fresh air scoop forces cool air for the best cooling effect. The included installation manual has clear pictures and instructions to guide the installer throughout the whole process. Bolt-on easy installation, no modification. Attributes: GTIN: 00648044889924 Brand Name: HPS Performance Add-On HPS Filter: HPS-4276 Extended Information: Country of Origin: China Emissions : Electronically Announced Life Cycle Status: Available To Order Packing Information: Quantity of Each: 1 Package UOM: EA Dimension: 24 x 12 x 10 inches Weight: 6 lb

The All-New HPS Performance 827 Series Air Intake Kit (Red, Part # 827-667R) for 2009-2014 GMC Yukon 4.8L 5.3L 6.2L V8 offers a free-flowing 4 inch mandrel-bent aluminum tube induction system designed to produce dyno proven performance gains - increase horsepower +16.3 whp , torque +17.1 ft/lbs and improve throttle response while maintaining safe air fuel ratio. The heavy duty powder coated steel heat shield blocks hot air from the air filter for the best cooling effect. The included installation manual has clear pictures and instructions to guide the installer throughout the whole process. The kit does NOT require tuning and does not trigger CEL light. No modification is required during the installation. HPS light weight mandrel-bent aluminum alloy tube replaces the stock restrictive air box and optimize the air flow with excellent heat dissipation and long lasting durability. HPS Performance 827 Series air intake kit features race proven reinforced silicone hoses and industrial grade 100% stainless steel T-bolt clamps which ensures reliability, even during the most extreme driving conditions. The All-New HPS Performance Air Filter is designed with performance in mind, delivering excellent filtration without sacrificing air flow. All HPS Performance Air Filter are made in the United States. Fine-tuned by HPS Performance to produce dyno proven performance gains - increase horsepower +16.3 whp , torque +17.1 ft/lbs and improve throttle response. Does NOT require tuning after the install. Light weight 4 inch mandrel-bent aluminum alloy piping replaces the stock restrictive air box and optimize the air flow with excellent heat dissipation and long lasting durability. Features HPS Performance race proven reinforced silicone hoses, industrial grade 100% stainless steel T-bolt clamps and Washable/Reusable Performance Air Filter. Heavy duty powder coated steel heat shield blocks hot air from the air filter for the best cooling effect. The included installation manual has clear pictures and instructions to guide the installer throughout the whole process. Bolt-on easy installation, no modification. Attributes: GTIN: 00648044890715 Brand Name: HPS Performance Add-On HPS Filter: HPS-4304 Extended Information: Country of Origin: China Emissions : Electronically Announced Life Cycle Status: Available To Order Packing Information: Quantity of Each: 1 Package UOM: EA Dimension: 28 x 16 x 10 inches Weight: 12 lb

The All-New HPS Performance 827 Series Air Intake Kit (Blue, Part # 827-665BL) for 2018-2019 Toyota Camry 2.5L offers a free-flowing 3 inch mandrel-bent aluminum tube induction system designed to produce dyno proven performance gains - increase horsepower +5 whp , torque +8 ft/lbs and improve throttle response while maintaining safe air fuel ratio. The heavy duty powder coated steel heat shield integrates with the factory fresh air scoop to direct cold air to the air filter for the best cooling effect. The included installation manual has clear pictures and instructions to guide the installer throughout the whole process. The kit does NOT require tuning and does not trigger CEL light. No modification is required during the installation. HPS light weight mandrel-bent aluminum alloy tube replaces the stock restrictive air box and optimize the air flow with excellent heat dissipation and long lasting durability. HPS Performance 827 Series air intake kit features race proven reinforced silicone hoses and industrial grade 100% stainless steel T-bolt clamps which ensures reliability, even during the most extreme driving conditions. The All-New HPS Performance Air Filter is designed with performance in mind, delivering excellent filtration without sacrificing air flow. All HPS Performance Air Filter are made in the United States. Fine-tuned by HPS Performance to produce dyno proven performance gains - increase horsepower +5 whp , torque +8 ft/lbs and improve throttle response. Does NOT require tuning after the install. Light weight 3 inch mandrel-bent aluminum alloy piping replaces the stock restrictive air box and optimize the air flow with excellent heat dissipation and long lasting durability. Features HPS Performance race proven reinforced silicone hoses, industrial grade 100% stainless steel T-bolt clamps and Washable/Reusable Performance Air Filter. Heavy duty powder coated steel heat shield integrates with fresh air scoop forces cool air for the best cooling effect. The included installation manual has clear pictures and instructions to guide the installer throughout the whole process. Bolt-on easy installation, no modification. Attributes: GTIN: 00648044889900 Brand Name: HPS Performance Add-On HPS Filter: HPS-4276 Extended Information: Country of Origin: China Emissions : Electronically Announced Life Cycle Status: Available To Order Packing Information: Quantity of Each: 1 Package UOM: EA Dimension: 24 x 12 x 10 inches Weight: 6 lb

HPS black performance cold air intake with heat shield [part number 827-664WB] for 2012-2018 Jeep Wrangler JK 3.6L V6 offers a free-flowing 3.25" mandrel-bent aluminum tube induction system designed to improve throttle response and produce dyno proven performance gains +6.1 Whp horsepower, +9.9 Ft/lbs torque while maintaining safe air fuel ratio. The heavy duty powder coated steel heat shield included in the kit blocks out the heat from engine and maximize the cooling effect. The included installation manual has clear pictures and instructions to guide the installer throughout the whole process. The kit does NOT require tuning and does not trigger CEL light. No modification is required during the installation. HPS light weight 3.25" mandrel-bent aluminum alloy piping replace the stock restrictive air box and optimize the air flow with long lasting durability. HPS performance cold air intake kit features HPS signature race proven reinforced silicone hoses and industrial grade 100% stainless steel T-bolt clamps which ensures reliability, even during the most extreme driving conditions. The All-New HPS Performance Air Filters are made in the United State and are designed with performance in mind, delivering excellent filtration without sacrificing air flow. Washable and reusable. NOT CARB Complaint. Vehicle Application: 2012-2018 Jeep Wrangler JK 3.6L V6 Bolt-on easy installation. No CEL light. Does not require modification or re-tuning. Dyno proven performance gains +6.1 Whp horsepower, +9.9 Ft/lbs torque and improve throttle response The included installation manual has clear pictures and instructions to guide the installer throughout the whole process. 3.25" mandrel-bent aluminum alloy piping replaces the stock restrictive air box and optimize the air flow. Does NOT require re-tuning. Heavy duty steel cool air heat shield box, Washable/Reusable HPS Performance Air Filter, HPS signature race proven reinforced silicone hoses and industrial grade 100% stainless steel T-bolt clamps. Attributes: GTIN: 00648044887531 Brand Name: HPS Performance Add-On HPS Filter: HPS-4299 Extended Information: Country of Origin: China Emissions : Electronically Announced Life Cycle Status: Available To Order Packing Information: Quantity of Each: 1 Package UOM: EA Dimension: 24 x 12 x 10 inches Weight: 9 lb

The All-New HPS Performance 827 Series Air Intake Kit (Blue, Part # 827-667BL) for 2009-2014 GMC Yukon 4.8L 5.3L 6.2L V8 offers a free-flowing 4 inch mandrel-bent aluminum tube induction system designed to produce dyno proven performance gains - increase horsepower +16.3 whp , torque +17.1 ft/lbs and improve throttle response while maintaining safe air fuel ratio. The heavy duty powder coated steel heat shield blocks hot air from the air filter for the best cooling effect. The included installation manual has clear pictures and instructions to guide the installer throughout the whole process. The kit does NOT require tuning and does not trigger CEL light. No modification is required during the installation. HPS light weight mandrel-bent aluminum alloy tube replaces the stock restrictive air box and optimize the air flow with excellent heat dissipation and long lasting durability. HPS Performance 827 Series air intake kit features race proven reinforced silicone hoses and industrial grade 100% stainless steel T-bolt clamps which ensures reliability, even during the most extreme driving conditions. The All-New HPS Performance Air Filter is designed with performance in mind, delivering excellent filtration without sacrificing air flow. All HPS Performance Air Filter are made in the United States. Fine-tuned by HPS Performance to produce dyno proven performance gains - increase horsepower +16.3 whp , torque +17.1 ft/lbs and improve throttle response. Does NOT require tuning after the install. Light weight 4 inch mandrel-bent aluminum alloy piping replaces the stock restrictive air box and optimize the air flow with excellent heat dissipation and long lasting durability. Features HPS Performance race proven reinforced silicone hoses, industrial grade 100% stainless steel T-bolt clamps and Washable/Reusable Performance Air Filter. Heavy duty powder coated steel heat shield blocks hot air from the air filter for the best cooling effect. The included installation manual has clear pictures and instructions to guide the installer throughout the whole process. Bolt-on easy installation, no modification. Attributes: GTIN: 00648044890692 Brand Name: HPS Performance Add-On HPS Filter: HPS-4304 Extended Information: Country of Origin: China Emissions : Electronically Announced Life Cycle Status: Available To Order Packing Information: Quantity of Each: 1 Package UOM: EA Dimension: 28 x 16 x 10 inches Weight: 12 lb

HPS red performance cold air intake with heat shield [part number 827-664R] for 2012-2018 Jeep Wrangler JK 3.6L V6 offers a free-flowing 3.25" mandrel-bent aluminum tube induction system designed to improve throttle response and produce dyno proven performance gains +6.1 Whp horsepower, +9.9 Ft/lbs torque while maintaining safe air fuel ratio. The heavy duty powder coated steel heat shield included in the kit blocks out the heat from engine and maximize the cooling effect. The included installation manual has clear pictures and instructions to guide the installer throughout the whole process. The kit does NOT require tuning and does not trigger CEL light. No modification is required during the installation. HPS light weight 3.25" mandrel-bent aluminum alloy piping replace the stock restrictive air box and optimize the air flow with long lasting durability. HPS performance cold air intake kit features HPS signature race proven reinforced silicone hoses and industrial grade 100% stainless steel T-bolt clamps which ensures reliability, even during the most extreme driving conditions. The All-New HPS Performance Air Filters are made in the United State and are designed with performance in mind, delivering excellent filtration without sacrificing air flow. Washable and reusable. NOT CARB Complaint. Vehicle Application: 2012-2018 Jeep Wrangler JK 3.6L V6 Bolt-on easy installation. No CEL light. Does not require modification or re-tuning. Dyno proven performance gains +6.1 Whp horsepower, +9.9 Ft/lbs torque and improve throttle response The included installation manual has clear pictures and instructions to guide the installer throughout the whole process. 3.25" mandrel-bent aluminum alloy piping replaces the stock restrictive air box and optimize the air flow. Does NOT require re-tuning. Heavy duty steel cool air heat shield box, Washable/Reusable HPS Performance Air Filter, HPS signature race proven reinforced silicone hoses and industrial grade 100% stainless steel T-bolt clamps. Attributes: GTIN: 00648044887555 Brand Name: HPS Performance Add-On HPS Filter: HPS-4299 Extended Information: Country of Origin: China Emissions : Electronically Announced Life Cycle Status: Available To Order Packing Information: Quantity of Each: 1 Package UOM: EA Dimension: 24 x 12 x 10 inches Weight: 9 lb

HPS polish performance cold air intake with heat shield [part number 827-664P] for 2012-2018 Jeep Wrangler JK 3.6L V6 offers a free-flowing 3.25" mandrel-bent aluminum tube induction system designed to improve throttle response and produce dyno proven performance gains +6.1 Whp horsepower, +9.9 Ft/lbs torque while maintaining safe air fuel ratio. The heavy duty powder coated steel heat shield included in the kit blocks out the heat from engine and maximize the cooling effect. The included installation manual has clear pictures and instructions to guide the installer throughout the whole process. The kit does NOT require tuning and does not trigger CEL light. No modification is required during the installation. HPS light weight 3.25" mandrel-bent aluminum alloy piping replace the stock restrictive air box and optimize the air flow with long lasting durability. HPS performance cold air intake kit features HPS signature race proven reinforced silicone hoses and industrial grade 100% stainless steel T-bolt clamps which ensures reliability, even during the most extreme driving conditions. The All-New HPS Performance Air Filters are made in the United State and are designed with performance in mind, delivering excellent filtration without sacrificing air flow. Washable and reusable. NOT CARB Complaint. Vehicle Application: 2012-2018 Jeep Wrangler JK 3.6L V6 Bolt-on easy installation. No CEL light. Does not require modification or re-tuning. Dyno proven performance gains +6.1 Whp horsepower, +9.9 Ft/lbs torque and improve throttle response The included installation manual has clear pictures and instructions to guide the installer throughout the whole process. 3.25" mandrel-bent aluminum alloy piping replaces the stock restrictive air box and optimize the air flow. Does NOT require re-tuning. Heavy duty steel cool air heat shield box, Washable/Reusable HPS Performance Air Filter, HPS signature race proven reinforced silicone hoses and industrial grade 100% stainless steel T-bolt clamps. Attributes: GTIN: 00648044887524 Brand Name: HPS Performance Add-On HPS Filter: HPS-4299 Extended Information: Country of Origin: China Emissions : Electronically Announced Life Cycle Status: Available To Order Packing Information: Quantity of Each: 1 Package UOM: EA Dimension: 24 x 12 x 10 inches Weight: 9 lb

HPS black performance Shortram Air intake with heat shield [part number 827-663WB] for 1995-1999 Toyota 4Runner 2.7L offers a free-flowing 3" mandrel-bent aluminum tube induction system designed to improve throttle response and produce dyno proven performance gains +7.0 Whp horsepower, +9.0 Ft/lbs torque while maintaining safe air fuel ratio. The heavy duty powder coated steel heat shield included in the kit blocks out the heat from engine and maximize the cooling effect. The included installation manual has clear pictures and instructions to guide the installer throughout the whole process. The kit does NOT require tuning and does not trigger CEL light. No modification is required during the installation. HPS light weight 3" mandrel-bent aluminum alloy piping replace the stock restrictive air box and optimize the air flow with long lasting durability. HPS performance Shortram Air intake kit features HPS signature race proven reinforced silicone hoses and industrial grade 100% stainless steel T-bolt clamps which ensures reliability, even during the most extreme driving conditions. The All-New HPS Performance Air Filter is designed with performance in mind, delivering excellent filtration without sacrificing air flow. Washable and reusable. All HPS Performance Air Filters are made in the United States and backed by HPS One-Year Limited Warranty. NOT CARB Complaint. This HPS intake is designed for 1995-1999 Toyota 4Runner 2.7L Bolt-on easy installation. No CEL light. Does not require modification or re-tuning. Dyno proven performance gains +7.0 Whp horsepower, +9.0 Ft/lbs torque and improve throttle response The included installation manual has clear pictures and instructions to guide the installer throughout the whole process. 3" mandrel-bent aluminum alloy piping replaces the stock restrictive air box and optimize the air flow. Does NOT require re-tuning. Heavy duty steel cool air heat shield box, HPS Washable/Reusable Performance High Flow Air Filter, HPS signature race proven reinforced silicone hoses and industrial grade 100% stainless steel T-bolt clamps. Attributes: GTIN: 00648044884851 Brand Name: HPS Performance Add-On HPS Filter: HPS-4276 Extended Information: Country of Origin: China Emissions : Electronically Announced Life Cycle Status: Available To Order Packing Information: Quantity of Each: 1 Package UOM: EA Dimension: 24 x 12 x 10 inches Weight: 9 lb

The All-New HPS Performance 827 Series Air Intake Kit (Polish, Part # 827-665P) for 2018-2019 Toyota Camry 2.5L offers a free-flowing 3 inch mandrel-bent aluminum tube induction system designed to produce dyno proven performance gains - increase horsepower +5 whp , torque +8 ft/lbs and improve throttle response while maintaining safe air fuel ratio. The heavy duty powder coated steel heat shield integrates with the factory fresh air scoop to direct cold air to the air filter for the best cooling effect. The included installation manual has clear pictures and instructions to guide the installer throughout the whole process. The kit does NOT require tuning and does not trigger CEL light. No modification is required during the installation. HPS light weight mandrel-bent aluminum alloy tube replaces the stock restrictive air box and optimize the air flow with excellent heat dissipation and long lasting durability. HPS Performance 827 Series air intake kit features race proven reinforced silicone hoses and industrial grade 100% stainless steel T-bolt clamps which ensures reliability, even during the most extreme driving conditions. The All-New HPS Performance Air Filter is designed with performance in mind, delivering excellent filtration without sacrificing air flow. All HPS Performance Air Filter are made in the United States. Fine-tuned by HPS Performance to produce dyno proven performance gains - increase horsepower +5 whp , torque +8 ft/lbs and improve throttle response. Does NOT require tuning after the install. Light weight 3 inch mandrel-bent aluminum alloy piping replaces the stock restrictive air box and optimize the air flow with excellent heat dissipation and long lasting durability. Features HPS Performance race proven reinforced silicone hoses, industrial grade 100% stainless steel T-bolt clamps and Washable/Reusable Performance Air Filter. Heavy duty powder coated steel heat shield integrates with fresh air scoop forces cool air for the best cooling effect. The included installation manual has clear pictures and instructions to guide the installer throughout the whole process. Bolt-on easy installation, no modification. Attributes: GTIN: 00648044889917 Brand Name: HPS Performance Add-On HPS Filter: HPS-4276 Extended Information: Country of Origin: China Emissions : Electronically Announced Life Cycle Status: Available To Order Packing Information: Quantity of Each: 1 Package UOM: EA Dimension: 24 x 12 x 10 inches Weight: 6 lb

HPS red performance Shortram Air intake with heat shield [part number 827-663R] for 1995-1999 Toyota 4Runner 2.7L offers a free-flowing 3" mandrel-bent aluminum tube induction system designed to improve throttle response and produce dyno proven performance gains +7.0 Whp horsepower, +9.0 Ft/lbs torque while maintaining safe air fuel ratio. The heavy duty powder coated steel heat shield included in the kit blocks out the heat from engine and maximize the cooling effect. The included installation manual has clear pictures and instructions to guide the installer throughout the whole process. The kit does NOT require tuning and does not trigger CEL light. No modification is required during the installation. HPS light weight 3" mandrel-bent aluminum alloy piping replace the stock restrictive air box and optimize the air flow with long lasting durability. HPS performance Shortram Air intake kit features HPS signature race proven reinforced silicone hoses and industrial grade 100% stainless steel T-bolt clamps which ensures reliability, even during the most extreme driving conditions. The All-New HPS Performance Air Filter is designed with performance in mind, delivering excellent filtration without sacrificing air flow. Washable and reusable. All HPS Performance Air Filters are made in the United States and backed by HPS One-Year Limited Warranty. NOT CARB Complaint. This HPS intake is designed for 1995-1999 Toyota 4Runner 2.7L Bolt-on easy installation. No CEL light. Does not require modification or re-tuning. Dyno proven performance gains +7.0 Whp horsepower, +9.0 Ft/lbs torque and improve throttle response The included installation manual has clear pictures and instructions to guide the installer throughout the whole process. 3" mandrel-bent aluminum alloy piping replaces the stock restrictive air box and optimize the air flow. Does NOT require re-tuning. Heavy duty steel cool air heat shield box, HPS Washable/Reusable Performance High Flow Air Filter, HPS signature race proven reinforced silicone hoses and industrial grade 100% stainless steel T-bolt clamps. Attributes: GTIN: 00648044884844 Brand Name: HPS Performance Add-On HPS Filter: HPS-4276 Extended Information: Country of Origin: China Emissions : Electronically Announced Life Cycle Status: Available To Order Packing Information: Quantity of Each: 1 Package UOM: EA Dimension: 24 x 12 x 10 inches Weight: 9 lb

HPS polish performance Shortram Air intake with heat shield [part number 827-663P] for 1995-1999 Toyota 4Runner 2.7L offers a free-flowing 3" mandrel-bent aluminum tube induction system designed to improve throttle response and produce dyno proven performance gains +7.0 Whp horsepower, +9.0 Ft/lbs torque while maintaining safe air fuel ratio. The heavy duty powder coated steel heat shield included in the kit blocks out the heat from engine and maximize the cooling effect. The included installation manual has clear pictures and instructions to guide the installer throughout the whole process. The kit does NOT require tuning and does not trigger CEL light. No modification is required during the installation. HPS light weight 3" mandrel-bent aluminum alloy piping replace the stock restrictive air box and optimize the air flow with long lasting durability. HPS performance Shortram Air intake kit features HPS signature race proven reinforced silicone hoses and industrial grade 100% stainless steel T-bolt clamps which ensures reliability, even during the most extreme driving conditions. The All-New HPS Performance Air Filter is designed with performance in mind, delivering excellent filtration without sacrificing air flow. Washable and reusable. All HPS Performance Air Filters are made in the United States and backed by HPS One-Year Limited Warranty. NOT CARB Complaint. This HPS intake is designed for 1995-1999 Toyota 4Runner 2.7L Bolt-on easy installation. No CEL light. Does not require modification or re-tuning. Dyno proven performance gains +7.0 Whp horsepower, +9.0 Ft/lbs torque and improve throttle response The included installation manual has clear pictures and instructions to guide the installer throughout the whole process. 3" mandrel-bent aluminum alloy piping replaces the stock restrictive air box and optimize the air flow. Does NOT require re-tuning. Heavy duty steel cool air heat shield box, HPS Washable/Reusable Performance High Flow Air Filter, HPS signature race proven reinforced silicone hoses and industrial grade 100% stainless steel T-bolt clamps. Attributes: GTIN: 00648044884837 Brand Name: HPS Performance Add-On HPS Filter: HPS-4276 Extended Information: Country of Origin: China Emissions : Electronically Announced Life Cycle Status: Available To Order Packing Information: Quantity of Each: 1 Package UOM: EA Dimension: 24 x 12 x 10 inches Weight: 9 lb

HPS blue performance Shortram Air intake with heat shield [part number 827-663BL] for 1995-1999 Toyota 4Runner 2.7L offers a free-flowing 3" mandrel-bent aluminum tube induction system designed to improve throttle response and produce dyno proven performance gains +7.0 Whp horsepower, +9.0 Ft/lbs torque while maintaining safe air fuel ratio. The heavy duty powder coated steel heat shield included in the kit blocks out the heat from engine and maximize the cooling effect. The included installation manual has clear pictures and instructions to guide the installer throughout the whole process. The kit does NOT require tuning and does not trigger CEL light. No modification is required during the installation. HPS light weight 3" mandrel-bent aluminum alloy piping replace the stock restrictive air box and optimize the air flow with long lasting durability. HPS performance Shortram Air intake kit features HPS signature race proven reinforced silicone hoses and industrial grade 100% stainless steel T-bolt clamps which ensures reliability, even during the most extreme driving conditions. The All-New HPS Performance Air Filter is designed with performance in mind, delivering excellent filtration without sacrificing air flow. Washable and reusable. All HPS Performance Air Filters are made in the United States and backed by HPS One-Year Limited Warranty. NOT CARB Complaint. This HPS intake is designed for 1995-1999 Toyota 4Runner 2.7L Bolt-on easy installation. No CEL light. Does not require modification or re-tuning. Dyno proven performance gains +7.0 Whp horsepower, +9.0 Ft/lbs torque and improve throttle response The included installation manual has clear pictures and instructions to guide the installer throughout the whole process. 3" mandrel-bent aluminum alloy piping replaces the stock restrictive air box and optimize the air flow. Does NOT require re-tuning. Heavy duty steel cool air heat shield box, HPS Washable/Reusable Performance High Flow Air Filter, HPS signature race proven reinforced silicone hoses and industrial grade 100% stainless steel T-bolt clamps. Attributes: GTIN: 00648044884820 Brand Name: HPS Performance Add-On HPS Filter: HPS-4276 Extended Information: Country of Origin: China Emissions : Electronically Announced Life Cycle Status: Available To Order Packing Information: Quantity of Each: 1 Package UOM: EA Dimension: 24 x 12 x 10 inches Weight: 9 lb

The All-New HPS Performance 827 Series Air Intake Kit (Black, Part # 827-656WB) for 2018-2020 Honda Accord 2.0L Turbo offers a free-flowing 3 inch mandrel-bent aluminum tube induction system designed to produce dyno proven performance gains +15 Whp horsepower, +13 Ft/lbs torque and improve throttle response while maintaining safe air fuel ratio. The heavy duty powder coated steel heat shield integrates with the factory fresh air scoop to direct cold air to the air filters for the best cooling effect. The included installation manual has clear pictures and instructions to guide the installer throughout the whole process. The kit does NOT require tuning and does not trigger CEL light. No modification is required during the installation. HPS light weight mandrel-bent aluminum alloy tubes replace the stock restrictive air box and optimize the air flow with long lasting durability. HPS Performance 827 Series air intake kit features race proven reinforced silicone hoses and industrial grade 100% stainless steel T-bolt clamps which ensures reliability, even during the most extreme driving conditions. The All-New HPS Performance Air Filter is designed with performance in mind, delivering excellent filtration without sacrificing air flow. All HPS Performance Air Filters are made in the United States. Fine-tuned by HPS Performance to deliver dyno proven gains, increase horsepower +15 whp, torque +13 ft/lbs and improve throttle response; Does NOT require tuning after the install. Light weight 3 inch mandrel-bent aluminum alloy piping replaces the stock restrictive air box and optimize the air flow Features HPS Performance race proven reinforced silicone hoses, industrial grade 100% stainless steel T-bolt clamps and Washable/Reusable Performance Air Filter. Heavy duty powder coated steel heat integrates with fresh air scoop forces cool air for the best cooling effect. The included installation manual has clear pictures and instructions to guide the installer throughout the whole process. Bolt-on easy installation, no modification. Attributes: GTIN: 00648044893259 Brand Name: HPS Performance Add-On HPS Filter: HPS-4276 Extended Information: Country of Origin: China Emissions : Electronically Announced Life Cycle Status: Available To Order Packing Information: Quantity of Each: 1 Package UOM: EA Dimension: 24 x 12 x 10 inches Weight: 9 lb

The All-New HPS Performance 827 Series Air Intake Kit (Red, Part # 827-656R) for 2018-2020 Honda Accord 2.0L Turbo offers a free-flowing 3 inch mandrel-bent aluminum tube induction system designed to produce dyno proven performance gains +15 Whp horsepower, +13 Ft/lbs torque and improve throttle response while maintaining safe air fuel ratio. The heavy duty powder coated steel heat shield integrates with the factory fresh air scoop to direct cold air to the air filters for the best cooling effect. The included installation manual has clear pictures and instructions to guide the installer throughout the whole process. The kit does NOT require tuning and does not trigger CEL light. No modification is required during the installation. HPS light weight mandrel-bent aluminum alloy tubes replace the stock restrictive air box and optimize the air flow with long lasting durability. HPS Performance 827 Series air intake kit features race proven reinforced silicone hoses and industrial grade 100% stainless steel T-bolt clamps which ensures reliability, even during the most extreme driving conditions. The All-New HPS Performance Air Filter is designed with performance in mind, delivering excellent filtration without sacrificing air flow. All HPS Performance Air Filters are made in the United States. Fine-tuned by HPS Performance to deliver dyno proven gains, increase horsepower +15 whp, torque +13 ft/lbs and improve throttle response; Does NOT require tuning after the install. Light weight 3 inch mandrel-bent aluminum alloy piping replaces the stock restrictive air box and optimize the air flow Features HPS Performance race proven reinforced silicone hoses, industrial grade 100% stainless steel T-bolt clamps and Washable/Reusable Performance Air Filter. Heavy duty powder coated steel heat integrates with fresh air scoop forces cool air for the best cooling effect. The included installation manual has clear pictures and instructions to guide the installer throughout the whole process. Bolt-on easy installation, no modification. Attributes: GTIN: 00648044893273 Brand Name: HPS Performance Add-On HPS Filter: HPS-4276 Extended Information: Country of Origin: China Emissions : Electronically Announced Life Cycle Status: Available To Order Packing Information: Quantity of Each: 1 Package UOM: EA Dimension: 24 x 12 x 10 inches Weight: 9 lb

HPS blue performance cold air intake with heat shield [part number 827-664BL] for 2012-2018 Jeep Wrangler JK 3.6L V6 offers a free-flowing 3.25" mandrel-bent aluminum tube induction system designed to improve throttle response and produce dyno proven performance gains +6.1 Whp horsepower, +9.9 Ft/lbs torque while maintaining safe air fuel ratio. The heavy duty powder coated steel heat shield included in the kit blocks out the heat from engine and maximize the cooling effect. The included installation manual has clear pictures and instructions to guide the installer throughout the whole process. The kit does NOT require tuning and does not trigger CEL light. No modification is required during the installation. HPS light weight 3.25" mandrel-bent aluminum alloy piping replace the stock restrictive air box and optimize the air flow with long lasting durability. HPS performance cold air intake kit features HPS signature race proven reinforced silicone hoses and industrial grade 100% stainless steel T-bolt clamps which ensures reliability, even during the most extreme driving conditions. The All-New HPS Performance Air Filters are made in the United State and are designed with performance in mind, delivering excellent filtration without sacrificing air flow. Washable and reusable. NOT CARB Complaint. Vehicle Application: 2012-2018 Jeep Wrangler JK 3.6L V6 Bolt-on easy installation. No CEL light. Does not require modification or re-tuning. Dyno proven performance gains +6.1 Whp horsepower, +9.9 Ft/lbs torque and improve throttle response The included installation manual has clear pictures and instructions to guide the installer throughout the whole process. 3.25" mandrel-bent aluminum alloy piping replaces the stock restrictive air box and optimize the air flow. Does NOT require re-tuning. Heavy duty steel cool air heat shield box, Washable/Reusable HPS Performance Air Filter, HPS signature race proven reinforced silicone hoses and industrial grade 100% stainless steel T-bolt clamps. Attributes: GTIN: 00648044887548 Brand Name: HPS Performance Add-On HPS Filter: HPS-4299 Extended Information: Country of Origin: China Emissions : Electronically Announced Life Cycle Status: Available To Order Packing Information: Quantity of Each: 1 Package UOM: EA Dimension: 24 x 12 x 10 inches Weight: 9 lb

The All-New HPS Performance 827 Series Air Intake Kit (Blue, Part # 827-656BL) for 2018-2020 Honda Accord 2.0L Turbo offers a free-flowing 3 inch mandrel-bent aluminum tube induction system designed to produce dyno proven performance gains +15 Whp horsepower, +13 Ft/lbs torque and improve throttle response while maintaining safe air fuel ratio. The heavy duty powder coated steel heat shield integrates with the factory fresh air scoop to direct cold air to the air filters for the best cooling effect. The included installation manual has clear pictures and instructions to guide the installer throughout the whole process. The kit does NOT require tuning and does not trigger CEL light. No modification is required during the installation. HPS light weight mandrel-bent aluminum alloy tubes replace the stock restrictive air box and optimize the air flow with long lasting durability. HPS Performance 827 Series air intake kit features race proven reinforced silicone hoses and industrial grade 100% stainless steel T-bolt clamps which ensures reliability, even during the most extreme driving conditions. The All-New HPS Performance Air Filter is designed with performance in mind, delivering excellent filtration without sacrificing air flow. All HPS Performance Air Filters are made in the United States. Fine-tuned by HPS Performance to deliver dyno proven gains, increase horsepower +15 whp, torque +13 ft/lbs and improve throttle response; Does NOT require tuning after the install. Light weight 3 inch mandrel-bent aluminum alloy piping replaces the stock restrictive air box and optimize the air flow Features HPS Performance race proven reinforced silicone hoses, industrial grade 100% stainless steel T-bolt clamps and Washable/Reusable Performance Air Filter. Heavy duty powder coated steel heat integrates with fresh air scoop forces cool air for the best cooling effect. The included installation manual has clear pictures and instructions to guide the installer throughout the whole process. Bolt-on easy installation, no modification. Attributes: GTIN: 00648044893266 Brand Name: HPS Performance Add-On HPS Filter: HPS-4276 Extended Information: Country of Origin: China Emissions : Electronically Announced Life Cycle Status: Available To Order Packing Information: Quantity of Each: 1 Package UOM: EA Dimension: 24 x 12 x 10 inches Weight: 9 lb

The All-New HPS Performance 827 Series Air Intake Kit (Red, Part # 827-638R) for 2015-2017 Ford Mustang 3.7L V6 offers a free-flowing 3-1/4 inch mandrel-bent aluminum tube induction system designed to produce dyno proven performance gains +19.7 Whp horsepower, +16.9 Ft/lbs torque and improve throttle response while maintaining safe air fuel ratio. The heavy duty powder coated steel heat shield integrates with the factory fresh air scoop to direct cold air to the air filters for the best cooling effect. The included installation manual has clear pictures and instructions to guide the installer throughout the whole process. The kit does NOT require tuning and does not trigger CEL light. No modification is required during the installation. HPS light weight mandrel-bent aluminum alloy tubes replace the stock restrictive air box and optimize the air flow with long lasting durability. HPS Performance 827 Series air intake kit features race proven reinforced silicone hoses and industrial grade 100% stainless steel T-bolt clamps which ensures reliability, even during the most extreme driving conditions. The All-New HPS Performance Air Filter is designed with performance in mind, delivering excellent filtration without sacrificing air flow. All HPS Performance Air Filters are made in the United States. Bolt-on easy installation. No CEL light. Does not require modification or re-tuning. Dyno proven performance gains +19.7 Whp horsepower, +16.9 Ft/lbs torque and improve throttle response The included installation manual has clear pictures and instructions to guide the installer throughout the whole process. 3.25" mandrel-bent aluminum alloy piping replaces the stock restrictive air box and optimize the air flow. Does NOT require re-tuning. Heavy duty steel cool air heat shield box, Washable/Reusable HPS Performance Air Filter, HPS signature race proven reinforced silicone hoses and industrial grade 100% stainless steel T-bolt clamps. Attributes: GTIN: 00648044887715 Brand Name: HPS Performance Add-On HPS Filter: HPS-4303 Extended Information: Country of Origin: China Emissions : Electronically Announced Life Cycle Status: Available To Order Packing Information: Quantity of Each: 1 Package UOM: EA Dimension: 28 x 16 x 10 inches Weight: 10 lb

The All-New HPS Performance 827 Series Air Intake Kit (Blue, Part # 827-638BL) for 2015-2017 Ford Mustang 3.7L V6 offers a free-flowing 3-1/4 inch mandrel-bent aluminum tube induction system designed to produce dyno proven performance gains +19.7 Whp horsepower, +16.9 Ft/lbs torque and improve throttle response while maintaining safe air fuel ratio. The heavy duty powder coated steel heat shield integrates with the factory fresh air scoop to direct cold air to the air filters for the best cooling effect. The included installation manual has clear pictures and instructions to guide the installer throughout the whole process. The kit does NOT require tuning and does not trigger CEL light. No modification is required during the installation. HPS light weight mandrel-bent aluminum alloy tubes replace the stock restrictive air box and optimize the air flow with long lasting durability. HPS Performance 827 Series air intake kit features race proven reinforced silicone hoses and industrial grade 100% stainless steel T-bolt clamps which ensures reliability, even during the most extreme driving conditions. The All-New HPS Performance Air Filter is designed with performance in mind, delivering excellent filtration without sacrificing air flow. All HPS Performance Air Filters are made in the United States. Bolt-on easy installation. No CEL light. Does not require modification or re-tuning. Dyno proven performance gains +19.7 Whp horsepower, +16.9 Ft/lbs torque and improve throttle response The included installation manual has clear pictures and instructions to guide the installer throughout the whole process. 3.25" mandrel-bent aluminum alloy piping replaces the stock restrictive air box and optimize the air flow. Does NOT require re-tuning. Heavy duty steel cool air heat shield box, Washable/Reusable HPS Performance Air Filter, HPS signature race proven reinforced silicone hoses and industrial grade 100% stainless steel T-bolt clamps. Attributes: GTIN: 00648044887708 Brand Name: HPS Performance Add-On HPS Filter: HPS-4303 Extended Information: Country of Origin: China Emissions : Electronically Announced Life Cycle Status: Available To Order Packing Information: Quantity of Each: 1 Package UOM: EA Dimension: 28 x 16 x 10 inches Weight: 10 lb

The All-New HPS Performance 827 Series Air Intake Kit (Black, Part # 827-636WB) for 1989-1995 Toyota Pickup 3.0L V6 offers a free-flowing 2-3/4 inch mandrel-bent aluminum tube induction system designed to produce dyno proven performance gains +5 Whp horsepower, +9 Ft/lbs torque and improve throttle response while maintaining safe air fuel ratio. The heavy duty powder coated steel heat shield form an enclosed cold air box to block out hot air for the best cooling effect. The included installation manual has clear pictures and instructions to guide the installer throughout the whole process. The kit does NOT require tuning and does not trigger CEL light. No modification is required during the installation. HPS light weight mandrel-bent aluminum alloy tube replaces the stock restrictive air box and optimize the air flow with excellent heat dissipation and long lasting durability. HPS Performance 827 Series air intake kit features race proven reinforced silicone hoses and industrial grade 100% stainless steel T-bolt clamps which ensures reliability, even during the most extreme driving conditions. The All-New HPS Performance Air Filter is designed with performance in mind, delivering excellent filtration without sacrificing air flow. All HPS Performance Air Filters are made in the United States. Fine-tuned by HPS Performance to deliver dyno proven gains, increase horsepower +5 whp, torque +9 ft/lbs and improve throttle response; Does NOT require tuning after the install. Light weight 2-3/4 inch mandrel-bent aluminum alloy piping replaces the stock restrictive air box and optimize the air flow Features HPS Performance race proven reinforced silicone hoses, industrial grade 100% stainless steel T-bolt clamps and Washable/Reusable Performance Air Filter. Heavy duty powder coated steel heat block out the hot air for the best cooling effect. The included installation manual has clear pictures and instructions to guide the installer throughout the whole process. Bolt-on easy installation, no modification. Attributes: GTIN: 00648044887616 Brand Name: HPS Performance Add-On HPS Filter: HPS-4276 Extended Information: Country of Origin: China Emissions : Electronically Announced Life Cycle Status: Available To Order Packing Information: Quantity of Each: 1 Package UOM: EA Dimension: 24 x 12 x 10 inches Weight: 11 lb

The All-New HPS Performance 827 Series Air Intake Kit (Polish, Part # 827-656P) for 2018-2020 Honda Accord 2.0L Turbo offers a free-flowing 3 inch mandrel-bent aluminum tube induction system designed to produce dyno proven performance gains +15 Whp horsepower, +13 Ft/lbs torque and improve throttle response while maintaining safe air fuel ratio. The heavy duty powder coated steel heat shield integrates with the factory fresh air scoop to direct cold air to the air filters for the best cooling effect. The included installation manual has clear pictures and instructions to guide the installer throughout the whole process. The kit does NOT require tuning and does not trigger CEL light. No modification is required during the installation. HPS light weight mandrel-bent aluminum alloy tubes replace the stock restrictive air box and optimize the air flow with long lasting durability. HPS Performance 827 Series air intake kit features race proven reinforced silicone hoses and industrial grade 100% stainless steel T-bolt clamps which ensures reliability, even during the most extreme driving conditions. The All-New HPS Performance Air Filter is designed with performance in mind, delivering excellent filtration without sacrificing air flow. All HPS Performance Air Filters are made in the United States. Fine-tuned by HPS Performance to deliver dyno proven gains, increase horsepower +15 whp, torque +13 ft/lbs and improve throttle response; Does NOT require tuning after the install. Light weight 3 inch mandrel-bent aluminum alloy piping replaces the stock restrictive air box and optimize the air flow Features HPS Performance race proven reinforced silicone hoses, industrial grade 100% stainless steel T-bolt clamps and Washable/Reusable Performance Air Filter. Heavy duty powder coated steel heat integrates with fresh air scoop forces cool air for the best cooling effect. The included installation manual has clear pictures and instructions to guide the installer throughout the whole process. Bolt-on easy installation, no modification. Attributes: GTIN: 00648044893242 Brand Name: HPS Performance Add-On HPS Filter: HPS-4276 Extended Information: Country of Origin: China Emissions : Electronically Announced Life Cycle Status: Available To Order Packing Information: Quantity of Each: 1 Package UOM: EA Dimension: 24 x 12 x 10 inches Weight: 9 lb

The All-New HPS Performance 827 Series Air Intake Kit (Red, Part # 827-636R) for 1989-1995 Toyota Pickup 3.0L V6 offers a free-flowing 2-3/4 inch mandrel-bent aluminum tube induction system designed to produce dyno proven performance gains +5 Whp horsepower, +9 Ft/lbs torque and improve throttle response while maintaining safe air fuel ratio. The heavy duty powder coated steel heat shield form an enclosed cold air box to block hot air for the best cooling effect. The included installation manual has clear pictures and instructions to guide the installer throughout the whole process. The kit does NOT require tuning and does not trigger CEL light. No modification is required during the installation. HPS light weight mandrel-bent aluminum alloy tube replaces the stock restrictive air box and optimize the air flow with excellent heat dissipation and long lasting durability. HPS Performance 827 Series air intake kit features race proven reinforced silicone hoses and industrial grade 100% stainless steel T-bolt clamps which ensures reliability, even during the most extreme driving conditions. The All-New HPS Performance Air Filter is designed with performance in mind, delivering excellent filtration without sacrificing air flow. All HPS Performance Air Filters are made in the United States. Fine-tuned by HPS Performance to deliver dyno proven gains, increase horsepower +5 whp, torque +9 ft/lbs and improve throttle response; Does NOT require tuning after the install. Light weight 2-3/4 inch mandrel-bent aluminum alloy piping replaces the stock restrictive air box and optimize the air flow Features HPS Performance race proven reinforced silicone hoses, industrial grade 100% stainless steel T-bolt clamps and Washable/Reusable Performance Air Filter. Heavy duty powder coated steel heat block out the hot air for the best cooling effect. The included installation manual has clear pictures and instructions to guide the installer throughout the whole process. Bolt-on easy installation, no modification. Attributes: GTIN: 00648044887630 Brand Name: HPS Performance Add-On HPS Filter: HPS-4276 Extended Information: Country of Origin: China Emissions : Electronically Announced Life Cycle Status: Available To Order Packing Information: Quantity of Each: 1 Package UOM: EA Dimension: 24 x 12 x 10 inches Weight: 11 lb

The All-New HPS Performance 827 Series Air Intake Kit (Polish, Part # 827-636P) for 1989-1995 Toyota Pickup 3.0L V6 offers a free-flowing 2-3/4 inch mandrel-bent aluminum tube induction system designed to produce dyno proven performance gains +5 Whp horsepower, +9 Ft/lbs torque and improve throttle response while maintaining safe air fuel ratio. The heavy duty powder coated steel heat shield form an enclosed cold air box to block out hot air for the best cooling effect. The included installation manual has clear pictures and instructions to guide the installer throughout the whole process. The kit does NOT require tuning and does not trigger CEL light. No modification is required during the installation. HPS light weight mandrel-bent aluminum alloy tube replaces the stock restrictive air box and optimize the air flow with excellent heat dissipation and long lasting durability. HPS Performance 827 Series air intake kit features race proven reinforced silicone hoses and industrial grade 100% stainless steel T-bolt clamps which ensures reliability, even during the most extreme driving conditions. The All-New HPS Performance Air Filter is designed with performance in mind, delivering excellent filtration without sacrificing air flow. All HPS Performance Air Filters are made in the United States. Fine-tuned by HPS Performance to deliver dyno proven gains, increase horsepower +5 whp, torque +9 ft/lbs and improve throttle response; Does NOT require tuning after the install. Light weight 2-3/4 inch mandrel-bent aluminum alloy piping replaces the stock restrictive air box and optimize the air flow Features HPS Performance race proven reinforced silicone hoses, industrial grade 100% stainless steel T-bolt clamps and Washable/Reusable Performance Air Filter. Heavy duty powder coated steel heat block out the hot air for the best cooling effect. The included installation manual has clear pictures and instructions to guide the installer throughout the whole process. Bolt-on easy installation, no modification. Attributes: GTIN: 00648044887609 Brand Name: HPS Performance Add-On HPS Filter: HPS-4276 Extended Information: Country of Origin: China Emissions : Electronically Announced Life Cycle Status: Available To Order Packing Information: Quantity of Each: 1 Package UOM: EA Dimension: 24 x 12 x 10 inches Weight: 11 lb

The All-New HPS Performance 827 Series Air Intake Kit (Black, Part # 827-638WB) for 2015-2017 Ford Mustang 3.7L V6 offers a free-flowing 3-1/4 inch mandrel-bent aluminum tube induction system designed to produce dyno proven performance gains +19.7 Whp horsepower, +16.9 Ft/lbs torque and improve throttle response while maintaining safe air fuel ratio. The heavy duty powder coated steel heat shield integrates with the factory fresh air scoop to direct cold air to the air filters for the best cooling effect. The included installation manual has clear pictures and instructions to guide the installer throughout the whole process. The kit does NOT require tuning and does not trigger CEL light. No modification is required during the installation. HPS light weight mandrel-bent aluminum alloy tubes replace the stock restrictive air box and optimize the air flow with long lasting durability. HPS Performance 827 Series air intake kit features race proven reinforced silicone hoses and industrial grade 100% stainless steel T-bolt clamps which ensures reliability, even during the most extreme driving conditions. The All-New HPS Performance Air Filter is designed with performance in mind, delivering excellent filtration without sacrificing air flow. All HPS Performance Air Filters are made in the United States. Bolt-on easy installation. No CEL light. Does not require modification or re-tuning. Dyno proven performance gains +19.7 Whp horsepower, +16.9 Ft/lbs torque and improve throttle response The included installation manual has clear pictures and instructions to guide the installer throughout the whole process. 3.25" mandrel-bent aluminum alloy piping replaces the stock restrictive air box and optimize the air flow. Does NOT require re-tuning. Heavy duty steel cool air heat shield box, Washable/Reusable HPS Performance Air Filter, HPS signature race proven reinforced silicone hoses and industrial grade 100% stainless steel T-bolt clamps. Attributes: GTIN: 00648044887692 Brand Name: HPS Performance Add-On HPS Filter: HPS-4303 Extended Information: Country of Origin: China Emissions : Electronically Announced Life Cycle Status: Available To Order Packing Information: Quantity of Each: 1 Package UOM: EA Dimension: 28 x 16 x 10 inches Weight: 10 lb

The All-New HPS Performance 827 Series Air Intake Kit (Polish, Part # 827-638P) for 2015-2017 Ford Mustang 3.7L V6 offers a free-flowing 3-1/4 inch mandrel-bent aluminum tube induction system designed to produce dyno proven performance gains +19.7 Whp horsepower, +16.9 Ft/lbs torque and improve throttle response while maintaining safe air fuel ratio. The heavy duty powder coated steel heat shield integrates with the factory fresh air scoop to direct cold air to the air filters for the best cooling effect. The included installation manual has clear pictures and instructions to guide the installer throughout the whole process. The kit does NOT require tuning and does not trigger CEL light. No modification is required during the installation. HPS light weight mandrel-bent aluminum alloy tubes replace the stock restrictive air box and optimize the air flow with long lasting durability. HPS Performance 827 Series air intake kit features race proven reinforced silicone hoses and industrial grade 100% stainless steel T-bolt clamps which ensures reliability, even during the most extreme driving conditions. The All-New HPS Performance Air Filter is designed with performance in mind, delivering excellent filtration without sacrificing air flow. All HPS Performance Air Filters are made in the United States. Bolt-on easy installation. No CEL light. Does not require modification or re-tuning. Dyno proven performance gains +19.7 Whp horsepower, +16.9 Ft/lbs torque and improve throttle response The included installation manual has clear pictures and instructions to guide the installer throughout the whole process. 3.25" mandrel-bent aluminum alloy piping replaces the stock restrictive air box and optimize the air flow. Does NOT require re-tuning. Heavy duty steel cool air heat shield box, Washable/Reusable HPS Performance Air Filter, HPS signature race proven reinforced silicone hoses and industrial grade 100% stainless steel T-bolt clamps. Attributes: GTIN: 00648044887685 Brand Name: HPS Performance Add-On HPS Filter: HPS-4303 Extended Information: Country of Origin: China Emissions : Electronically Announced Life Cycle Status: Available To Order Packing Information: Quantity of Each: 1 Package UOM: EA Dimension: 28 x 16 x 10 inches Weight: 10 lb

HPS black performance air intake kit with heat shield [part number 827-635WB] for 2008-2018 Lexus LX570 5.7L V8 offers a free-flowing 4" mandrel-bent aluminum tube induction system designed to improve throttle response and produce dyno proven performance gains +12.4 Whp horsepower, +17.6 Ft/lbs torque while maintaining safe air fuel ratio. The heavy duty powder coated steel heat shield included in the kit blocks out the heat from engine and maximize the cooling effect. The included installation manual has clear pictures and instructions to guide the installer throughout the whole process. The kit does NOT require tuning and does not trigger CEL light. No modification is required during the installation. HPS light weight 4" mandrel-bent aluminum alloy piping replace the stock restrictive air box and optimize the air flow with long lasting durability. HPS performance air intake kit features HPS signature race proven reinforced silicone hoses and industrial grade 100% stainless steel T-bolt clamps which ensures reliability, even during the most extreme driving conditions. The All-New HPS Performance Air Filter is designed with performance in mind, delivering excellent filtration without sacrificing air flow. Washable and reusable. All HPS Performance Air Filters are made in the United States and backed by HPS One-Year Limited Warranty. NOT CARB Complaint. This HPS intake is designed for 2008-2018 Lexus LX570 5.7L V8 Bolt-on easy installation. No CEL light. Does not require modification or re-tuning. Dyno proven performance gains +12.4 Whp horsepower, +17.6 Ft/lbs torque and improve throttle response The included installation manual has clear pictures and instructions to guide the installer throughout the whole process. 4" mandrel-bent aluminum alloy piping replaces the stock restrictive air box and optimize the air flow. Heavy duty steel cool air heat shield box, HPS Washable/Reusable Performance High Flow Air Filter, HPS signature race proven reinforced silicone hoses and industrial grade 100% stainless steel T-bolt clamps. Attributes: GTIN: 00648044884813 Brand Name: HPS Performance Add-On HPS Filter: HPS-4304 Extended Information: Country of Origin: China Emissions : Electronically Announced Life Cycle Status: Available To Order Packing Information: Quantity of Each: 1 Package UOM: EA Dimension: 24 x 12 x 10 inches Weight: 12 lb

HPS red performance air intake kit with heat shield [part number 827-635R] for 2008-2018 Lexus LX570 5.7L V8 offers a free-flowing 4" mandrel-bent aluminum tube induction system designed to improve throttle response and produce dyno proven performance gains +12.4 Whp horsepower, +17.6 Ft/lbs torque while maintaining safe air fuel ratio. The heavy duty powder coated steel heat shield included in the kit blocks out the heat from engine and maximize the cooling effect. The included installation manual has clear pictures and instructions to guide the installer throughout the whole process. The kit does NOT require tuning and does not trigger CEL light. No modification is required during the installation. HPS light weight 4" mandrel-bent aluminum alloy piping replace the stock restrictive air box and optimize the air flow with long lasting durability. HPS performance air intake kit features HPS signature race proven reinforced silicone hoses and industrial grade 100% stainless steel T-bolt clamps which ensures reliability, even during the most extreme driving conditions. The All-New HPS Performance Air Filter is designed with performance in mind, delivering excellent filtration without sacrificing air flow. Washable and reusable. All HPS Performance Air Filters are made in the United States and backed by HPS One-Year Limited Warranty. NOT CARB Complaint. This HPS intake is designed for 2008-2018 Lexus LX570 5.7L V8 Bolt-on easy installation. No CEL light. Does not require modification or re-tuning. Dyno proven performance gains +12.4 Whp horsepower, +17.6 Ft/lbs torque and improve throttle response The included installation manual has clear pictures and instructions to guide the installer throughout the whole process. 4" mandrel-bent aluminum alloy piping replaces the stock restrictive air box and optimize the air flow. Heavy duty steel cool air heat shield box, HPS Washable/Reusable Performance High Flow Air Filter, HPS signature race proven reinforced silicone hoses and industrial grade 100% stainless steel T-bolt clamps. Attributes: GTIN: 00648044884806 Brand Name: HPS Performance Add-On HPS Filter: HPS-4304 Extended Information: Country of Origin: China Emissions : Electronically Announced Life Cycle Status: Available To Order Packing Information: Quantity of Each: 1 Package UOM: EA Dimension: 24 x 12 x 10 inches Weight: 12 lb

HPS polish performance air intake kit with heat shield [part number 827-635P] for 2008-2018 Lexus LX570 5.7L V8 offers a free-flowing 4" mandrel-bent aluminum tube induction system designed to improve throttle response and produce dyno proven performance gains +12.4 Whp horsepower, +17.6 Ft/lbs torque while maintaining safe air fuel ratio. The heavy duty powder coated steel heat shield included in the kit blocks out the heat from engine and maximize the cooling effect. The included installation manual has clear pictures and instructions to guide the installer throughout the whole process. The kit does NOT require tuning and does not trigger CEL light. No modification is required during the installation. HPS light weight 4" mandrel-bent aluminum alloy piping replace the stock restrictive air box and optimize the air flow with long lasting durability. HPS performance air intake kit features HPS signature race proven reinforced silicone hoses and industrial grade 100% stainless steel T-bolt clamps which ensures reliability, even during the most extreme driving conditions. The All-New HPS Performance Air Filter is designed with performance in mind, delivering excellent filtration without sacrificing air flow. Washable and reusable. All HPS Performance Air Filters are made in the United States and backed by HPS One-Year Limited Warranty. NOT CARB Complaint. This HPS intake is designed for 2008-2018 Lexus LX570 5.7L V8 Bolt-on easy installation. No CEL light. Does not require modification or re-tuning. Dyno proven performance gains +12.4 Whp horsepower, +17.6 Ft/lbs torque and improve throttle response The included installation manual has clear pictures and instructions to guide the installer throughout the whole process. 4" mandrel-bent aluminum alloy piping replaces the stock restrictive air box and optimize the air flow. Heavy duty steel cool air heat shield box, HPS Washable/Reusable Performance High Flow Air Filter, HPS signature race proven reinforced silicone hoses and industrial grade 100% stainless steel T-bolt clamps. Attributes: GTIN: 00648044884790 Brand Name: HPS Performance Add-On HPS Filter: HPS-4304 Extended Information: Country of Origin: China Emissions : Electronically Announced Life Cycle Status: Available To Order Packing Information: Quantity of Each: 1 Package UOM: EA Dimension: 24 x 12 x 10 inches Weight: 12 lb

HPS blue performance air intake kit with heat shield [part number 827-635BL] for 2008-2018 Lexus LX570 5.7L V8 offers a free-flowing 4" mandrel-bent aluminum tube induction system designed to improve throttle response and produce dyno proven performance gains +12.4 Whp horsepower, +17.6 Ft/lbs torque while maintaining safe air fuel ratio. The heavy duty powder coated steel heat shield included in the kit blocks out the heat from engine and maximize the cooling effect. The included installation manual has clear pictures and instructions to guide the installer throughout the whole process. The kit does NOT require tuning and does not trigger CEL light. No modification is required during the installation. HPS light weight 4" mandrel-bent aluminum alloy piping replace the stock restrictive air box and optimize the air flow with long lasting durability. HPS performance air intake kit features HPS signature race proven reinforced silicone hoses and industrial grade 100% stainless steel T-bolt clamps which ensures reliability, even during the most extreme driving conditions. The All-New HPS Performance Air Filter is designed with performance in mind, delivering excellent filtration without sacrificing air flow. Washable and reusable. All HPS Performance Air Filters are made in the United States and backed by HPS One-Year Limited Warranty. NOT CARB Complaint. This HPS intake is designed for 2008-2018 Lexus LX570 5.7L V8 Bolt-on easy installation. No CEL light. Does not require modification or re-tuning. Dyno proven performance gains +12.4 Whp horsepower, +17.6 Ft/lbs torque and improve throttle response The included installation manual has clear pictures and instructions to guide the installer throughout the whole process. 4" mandrel-bent aluminum alloy piping replaces the stock restrictive air box and optimize the air flow. Heavy duty steel cool air heat shield box, HPS Washable/Reusable Performance High Flow Air Filter, HPS signature race proven reinforced silicone hoses and industrial grade 100% stainless steel T-bolt clamps. Attributes: GTIN: 00648044884783 Brand Name: HPS Performance Add-On HPS Filter: HPS-4304 Extended Information: Country of Origin: China Emissions : Electronically Announced Life Cycle Status: Available To Order Packing Information: Quantity of Each: 1 Package UOM: EA Dimension: 24 x 12 x 10 inches Weight: 12 lb

HPS black performance cold air intake with heat shield [part number 827-634WB] for 2015-2018 Ford F150 2.7L Ecoboost Turbo offers a free-flowing 3.5" mandrel-bent aluminum tube induction system designed to improve throttle response and produce dyno proven performance gains +28.8 Whp horsepower, +31.5 Ft/lbs torque while maintaining safe air fuel ratio. The heavy duty powder coated steel heat shield included in the kit blocks out the heat from engine and maximize the cooling effect. The included installation manual has clear pictures and instructions to guide the installer throughout the whole process. The kit does NOT require tuning and does not trigger CEL light. No modification is required during the installation. HPS light weight 3.5" mandrel-bent aluminum alloy piping replace the stock restrictive air box and optimize the air flow with long lasting durability. HPS performance cold air intake kit features HPS signature race proven reinforced silicone hoses and industrial grade 100% stainless steel T-bolt clamps which ensures reliability, even during the most extreme driving conditions. The All-New HPS Performance Air Filter is designed with performance in mind, delivering excellent filtration without sacrificing air flow. Washable and reusable. All HPS Performance Air Filters are made in the United States and backed by HPS One-Year Limited Warranty. NOT CARB Complaint. This HPS intake is designed for 2015-2018 Ford F150 2.7L Ecoboost Turbo Bolt-on easy installation. No CEL light. Does not require modification or re-tuning. Dyno proven performance gains +28.8 Whp horsepower, +31.5 Ft/lbs torque and improve throttle response The included installation manual has clear pictures and instructions to guide the installer throughout the whole process. 3.5" mandrel-bent aluminum alloy piping replaces the stock restrictive air box and optimize the air flow. Does NOT require re-tuning. Heavy duty steel cool air heat shield box, HPS Washable/Reusable Performance High Flow Air Filter, HPS signature race proven reinforced silicone hoses and industrial grade 100% stainless steel T-bolt clamps. Attributes: GTIN: 00648044884776 Brand Name: HPS Performance Add-On HPS Filter: HPS-4298 Extended Information: Country of Origin: China Emissions : Electronically Announced Life Cycle Status: Available To Order Packing Information: Quantity of Each: 1 Package UOM: EA Dimension: 24 x 12 x 10 inches Weight: 9 lb

The All-New HPS Performance 827 Series Air Intake Kit (Blue, Part # 827-636BL) for 1989-1995 Toyota Pickup 3.0L V6 offers a free-flowing 2-3/4 inch mandrel-bent aluminum tube induction system designed to produce dyno proven performance gains +5 Whp horsepower, +9 Ft/lbs torque and improve throttle response while maintaining safe air fuel ratio. The heavy duty powder coated steel heat shield form an enclosed cold air box to block out hot air for the best cooling effect. The included installation manual has clear pictures and instructions to guide the installer throughout the whole process. The kit does NOT require tuning and does not trigger CEL light. No modification is required during the installation. HPS light weight mandrel-bent aluminum alloy tube replaces the stock restrictive air box and optimize the air flow with excellent heat dissipation and long lasting durability. HPS Performance 827 Series air intake kit features race proven reinforced silicone hoses and industrial grade 100% stainless steel T-bolt clamps which ensures reliability, even during the most extreme driving conditions. The All-New HPS Performance Air Filter is designed with performance in mind, delivering excellent filtration without sacrificing air flow. All HPS Performance Air Filters are made in the United States. Fine-tuned by HPS Performance to deliver dyno proven gains, increase horsepower +5 whp, torque +9 ft/lbs and improve throttle response; Does NOT require tuning after the install. Light weight 2-3/4 inch mandrel-bent aluminum alloy piping replaces the stock restrictive air box and optimize the air flow Features HPS Performance race proven reinforced silicone hoses, industrial grade 100% stainless steel T-bolt clamps and Washable/Reusable Performance Air Filter. Heavy duty powder coated steel heat block out the hot air for the best cooling effect. The included installation manual has clear pictures and instructions to guide the installer throughout the whole process. Bolt-on easy installation, no modification. Attributes: GTIN: 00648044887623 Brand Name: HPS Performance Add-On HPS Filter: HPS-4276 Extended Information: Country of Origin: China Emissions : Electronically Announced Life Cycle Status: Available To Order Packing Information: Quantity of Each: 1 Package UOM: EA Dimension: 24 x 12 x 10 inches Weight: 11 lb

HPS polish performance cold air intake with heat shield [part number 827-634P] for 2015-2018 Ford F150 2.7L Ecoboost Turbo offers a free-flowing 3.5" mandrel-bent aluminum tube induction system designed to improve throttle response and produce dyno proven performance gains +28.8 Whp horsepower, +31.5 Ft/lbs torque while maintaining safe air fuel ratio. The heavy duty powder coated steel heat shield included in the kit blocks out the heat from engine and maximize the cooling effect. The included installation manual has clear pictures and instructions to guide the installer throughout the whole process. The kit does NOT require tuning and does not trigger CEL light. No modification is required during the installation. HPS light weight 3.5" mandrel-bent aluminum alloy piping replace the stock restrictive air box and optimize the air flow with long lasting durability. HPS performance cold air intake kit features HPS signature race proven reinforced silicone hoses and industrial grade 100% stainless steel T-bolt clamps which ensures reliability, even during the most extreme driving conditions. The All-New HPS Performance Air Filter is designed with performance in mind, delivering excellent filtration without sacrificing air flow. Washable and reusable. All HPS Performance Air Filters are made in the United States and backed by HPS One-Year Limited Warranty. NOT CARB Complaint. This HPS intake is designed for 2015-2018 Ford F150 2.7L Ecoboost Turbo Bolt-on easy installation. No CEL light. Does not require modification or re-tuning. Dyno proven performance gains +28.8 Whp horsepower, +31.5 Ft/lbs torque and improve throttle response The included installation manual has clear pictures and instructions to guide the installer throughout the whole process. 3.5" mandrel-bent aluminum alloy piping replaces the stock restrictive air box and optimize the air flow. Does NOT require re-tuning. Heavy duty steel cool air heat shield box, HPS Washable/Reusable Performance High Flow Air Filter, HPS signature race proven reinforced silicone hoses and industrial grade 100% stainless steel T-bolt clamps. Attributes: GTIN: 00648044884752 Brand Name: HPS Performance Add-On HPS Filter: HPS-4298 Extended Information: Country of Origin: China Emissions : Electronically Announced Life Cycle Status: Available To Order Packing Information: Quantity of Each: 1 Package UOM: EA Dimension: 24 x 12 x 10 inches Weight: 9 lb

HPS blue performance cold air intake with heat shield [part number 827-634BL] for 2015-2018 Ford F150 2.7L Ecoboost Turbo offers a free-flowing 3.5" mandrel-bent aluminum tube induction system designed to improve throttle response and produce dyno proven performance gains +28.8 Whp horsepower, +31.5 Ft/lbs torque while maintaining safe air fuel ratio. The heavy duty powder coated steel heat shield included in the kit blocks out the heat from engine and maximize the cooling effect. The included installation manual has clear pictures and instructions to guide the installer throughout the whole process. The kit does NOT require tuning and does not trigger CEL light. No modification is required during the installation. HPS light weight 3.5" mandrel-bent aluminum alloy piping replace the stock restrictive air box and optimize the air flow with long lasting durability. HPS performance cold air intake kit features HPS signature race proven reinforced silicone hoses and industrial grade 100% stainless steel T-bolt clamps which ensures reliability, even during the most extreme driving conditions. The All-New HPS Performance Air Filter is designed with performance in mind, delivering excellent filtration without sacrificing air flow. Washable and reusable. All HPS Performance Air Filters are made in the United States and backed by HPS One-Year Limited Warranty. NOT CARB Complaint. This HPS intake is designed for 2015-2018 Ford F150 2.7L Ecoboost Turbo Bolt-on easy installation. No CEL light. Does not require modification or re-tuning. Dyno proven performance gains +28.8 Whp horsepower, +31.5 Ft/lbs torque and improve throttle response The included installation manual has clear pictures and instructions to guide the installer throughout the whole process. 3.5" mandrel-bent aluminum alloy piping replaces the stock restrictive air box and optimize the air flow. Does NOT require re-tuning. Heavy duty steel cool air heat shield box, HPS Washable/Reusable Performance High Flow Air Filter, HPS signature race proven reinforced silicone hoses and industrial grade 100% stainless steel T-bolt clamps. Attributes: GTIN: 00648044884745 Brand Name: HPS Performance Add-On HPS Filter: HPS-4298 Extended Information: Country of Origin: China Emissions : Electronically Announced Life Cycle Status: Available To Order Packing Information: Quantity of Each: 1 Package UOM: EA Dimension: 24 x 12 x 10 inches Weight: 9 lb

The All-New HPS Performance 827 Series Air Intake Kit (Black, Part # 827-633WB) for 2018-2019 Lexus GS300 2.0L Turbo offers a free-flowing 3-1/4 inch mandrel-bent aluminum tube induction system designed to produce dyno proven performance gains - increase horsepower +31 whp , torque +30 ft/lbs and improve throttle response while maintaining safe air fuel ratio. The heavy duty powder coated steel heat shield integrates with the factory fresh air scoop to direct cold air to the air filter for the best cooling effect. The included installation manual has clear pictures and instructions to guide the installer throughout the whole process. The kit does NOT require tuning and does not trigger CEL light. No modification is required during the installation. HPS light weight mandrel-bent aluminum alloy tube replaces the stock restrictive air box and optimize the air flow with excellent heat dissipation and long lasting durability. HPS Performance 827 Series air intake kit features race proven reinforced silicone hoses and industrial grade 100% stainless steel T-bolt clamps which ensures reliability, even during the most extreme driving conditions. The All-New HPS Performance Air Filter is designed with performance in mind, delivering excellent filtration without sacrificing air flow. All HPS Performance Air Filter are made in the United States. Fine-tuned by HPS Performance to produce dyno proven performance gains - increase horsepower +31 whp , torque +30 ft/lbs and improve throttle response. Does NOT require tuning after the install. Light weight 3-1/4 inch mandrel-bent aluminum alloy piping replaces the stock restrictive air box and optimize the air flow with excellent heat dissipation and long lasting durability. Features HPS Performance race proven reinforced silicone hoses, industrial grade 100% stainless steel T-bolt clamps and Washable/Reusable Performance Air Filter. Heavy duty powder coated steel heat shield integrates with fresh air scoop forces cool air for the best cooling effect. The included installation manual has clear pictures and instructions to guide the installer throughout the whole process. Bolt-on easy installation, no modification. Attributes: GTIN: 00648044889894 Brand Name: HPS Performance Add-On HPS Filter: HPS-4303 Extended Information: Country of Origin: China Emissions : Electronically Announced Life Cycle Status: Available To Order Packing Information: Quantity of Each: 1 Package UOM: EA Dimension: 24 x 12 x 10 inches Weight: 8 lb

The All-New HPS Performance 827 Series Air Intake Kit (Red, Part # 827-633R) for 2018-2019 Lexus GS300 2.0L Turbo offers a free-flowing 3-1/4 inch mandrel-bent aluminum tube induction system designed to produce dyno proven performance gains - increase horsepower +31 whp , torque +30 ft/lbs and improve throttle response while maintaining safe air fuel ratio. The heavy duty powder coated steel heat shield integrates with the factory fresh air scoop to direct cold air to the air filter for the best cooling effect. The included installation manual has clear pictures and instructions to guide the installer throughout the whole process. The kit does NOT require tuning and does not trigger CEL light. No modification is required during the installation. HPS light weight mandrel-bent aluminum alloy tube replaces the stock restrictive air box and optimize the air flow with excellent heat dissipation and long lasting durability. HPS Performance 827 Series air intake kit features race proven reinforced silicone hoses and industrial grade 100% stainless steel T-bolt clamps which ensures reliability, even during the most extreme driving conditions. The All-New HPS Performance Air Filter is designed with performance in mind, delivering excellent filtration without sacrificing air flow. All HPS Performance Air Filter are made in the United States. Fine-tuned by HPS Performance to produce dyno proven performance gains - increase horsepower +31 whp , torque +30 ft/lbs and improve throttle response. Does NOT require tuning after the install. Light weight 3-1/4 inch mandrel-bent aluminum alloy piping replaces the stock restrictive air box and optimize the air flow with excellent heat dissipation and long lasting durability. Features HPS Performance race proven reinforced silicone hoses, industrial grade 100% stainless steel T-bolt clamps and Washable/Reusable Performance Air Filter. Heavy duty powder coated steel heat shield integrates with fresh air scoop forces cool air for the best cooling effect. The included installation manual has clear pictures and instructions to guide the installer throughout the whole process. Bolt-on easy installation, no modification. Attributes: GTIN: 00648044889887 Brand Name: HPS Performance Add-On HPS Filter: HPS-4303 Extended Information: Country of Origin: China Emissions : Electronically Announced Life Cycle Status: Available To Order Packing Information: Quantity of Each: 1 Package UOM: EA Dimension: 24 x 12 x 10 inches Weight: 8 lb

The All-New HPS Performance 827 Series Air Intake Kit (Polish, Part # 827-633P) for 2018-2019 Lexus GS300 2.0L Turbo offers a free-flowing 3-1/4 inch mandrel-bent aluminum tube induction system designed to produce dyno proven performance gains - increase horsepower +31 whp , torque +30 ft/lbs and improve throttle response while maintaining safe air fuel ratio. The heavy duty powder coated steel heat shield integrates with the factory fresh air scoop to direct cold air to the air filter for the best cooling effect. The included installation manual has clear pictures and instructions to guide the installer throughout the whole process. The kit does NOT require tuning and does not trigger CEL light. No modification is required during the installation. HPS light weight mandrel-bent aluminum alloy tube replaces the stock restrictive air box and optimize the air flow with excellent heat dissipation and long lasting durability. HPS Performance 827 Series air intake kit features race proven reinforced silicone hoses and industrial grade 100% stainless steel T-bolt clamps which ensures reliability, even during the most extreme driving conditions. The All-New HPS Performance Air Filter is designed with performance in mind, delivering excellent filtration without sacrificing air flow. All HPS Performance Air Filter are made in the United States. Fine-tuned by HPS Performance to produce dyno proven performance gains - increase horsepower +31 whp , torque +30 ft/lbs and improve throttle response. Does NOT require tuning after the install. Light weight 3-1/4 inch mandrel-bent aluminum alloy piping replaces the stock restrictive air box and optimize the air flow with excellent heat dissipation and long lasting durability. Features HPS Performance race proven reinforced silicone hoses, industrial grade 100% stainless steel T-bolt clamps and Washable/Reusable Performance Air Filter. Heavy duty powder coated steel heat shield integrates with fresh air scoop forces cool air for the best cooling effect. The included installation manual has clear pictures and instructions to guide the installer throughout the whole process. Bolt-on easy installation, no modification. Attributes: GTIN: 00648044889870 Brand Name: HPS Performance Add-On HPS Filter: HPS-4303 Extended Information: Country of Origin: China Emissions : Electronically Announced Life Cycle Status: Available To Order Packing Information: Quantity of Each: 1 Package UOM: EA Dimension: 24 x 12 x 10 inches Weight: 8 lb