Built for performance and show, the HPS Blue shortram air intake with heat shield for 2016-2019 10th Gen Honda Civic 2.0L Non Turbo offers a free-flowing mandrel-bent aluminum tube induction system designed to produce dyno proven performance gains +6.1 Whp horsepower, +6.2 Ft/lbs torque and improve throttle response while maintaining safe air fuel ratio. The heavy duty power coated steel heat shield included in the kit blocks out the heat from the engine and maximize the cooling effect. Compare to the cold air intake, HPS short ram cool air intake is a convenient way to change your intake in case of rainy days where water might be inducted into your cold air system. The included installation manual has clear pictures and instructions to guide the installer throughout the whole process. The kit does NOT require tuning and does not trigger CEL light. No modification is required during the installation. HPS light weight mandrel-bent aluminum alloy tube replaces the stock restrictive air box and optimize the air flow with excellent heat dissipation and long lasting durability. HPS shortram air intake kit features HPS signature race proven reinforced silicone hoses and industrial grade 100% stainless steel T-bolt clamps which ensures reliability, even during the most extreme driving conditions. The All-New HPS Performance Air Filters are made in the United State and are designed with performance in mind, delivering excellent filtration without sacrificing air flow. Washable and reusable. NOT CARB Complaint. Vehicle Application: 2016-2019 10th Gen Honda Civic 2.0L Non Turbo. Fine-tuned by HPS to deliver dyno proven performance gains +6.1 Whp horsepower, +6.2 Ft/lbs torque and improve throttle response; Does NOT require tuning after the install. Light weight mandrel-bent aluminum alloy piping replaces the stock restrictive air box and optimize the air flow Features HPS signature race proven reinforced silicone hoses and industrial grade 100% stainless steel T-bolt clamps. HPS Performance high flow air filter is washable and reusable. Heavy duty powder coated steel heat shield blocks out heat from engine and delivers maximum cooling effect. The included installation manual has clear pictures and instructions to guide the installer throughout the whole process. Bolt-on easy installation, no modification. Attributes: GTIN: 00648044885995 Brand Name: HPS Performance Add-On HPS Filter: HPS-4275 Extended Information: Country of Origin: China Emissions : Electronically Announced Life Cycle Status: Available To Order Packing Information: Quantity of Each: 1 Package UOM: EA Dimension: 24 x 12 x 10 inches Weight: 10 lb

Built for performance and show, the HPS Black shortram air intake with heat shield for 2016-2019 10th Gen Honda Civic 2.0L Non Turbo offers a free-flowing mandrel-bent aluminum tube induction system designed to produce dyno proven performance gains +6.1 Whp horsepower, +6.2 Ft/lbs torque and improve throttle response while maintaining safe air fuel ratio. The heavy duty power coated steel heat shield included in the kit blocks out the heat from the engine and maximize the cooling effect. Compare to the cold air intake, HPS short ram cool air intake is a convenient way to change your intake in case of rainy days where water might be inducted into your cold air system. The included installation manual has clear pictures and instructions to guide the installer throughout the whole process. The kit does NOT require tuning and does not trigger CEL light. No modification is required during the installation. HPS light weight mandrel-bent aluminum alloy tube replaces the stock restrictive air box and optimize the air flow with excellent heat dissipation and long lasting durability. HPS shortram air intake kit features HPS signature race proven reinforced silicone hoses and industrial grade 100% stainless steel T-bolt clamps which ensures reliability, even during the most extreme driving conditions. The All-New HPS Performance Air Filters are made in the United State and are designed with performance in mind, delivering excellent filtration without sacrificing air flow. Washable and reusable. NOT CARB Complaint. Vehicle Application: 2016-2019 10th Gen Honda Civic 2.0L Non Turbo. Fine-tuned by HPS to deliver dyno proven performance gains +6.1 Whp horsepower, +6.2 Ft/lbs torque and improve throttle response; Does NOT require tuning after the install. Light weight mandrel-bent aluminum alloy piping replaces the stock restrictive air box and optimize the air flow Features HPS signature race proven reinforced silicone hoses and industrial grade 100% stainless steel T-bolt clamps. HPS Performance high flow air filter is washable and reusable. Heavy duty powder coated steel heat shield blocks out heat from engine and delivers maximum cooling effect. The included installation manual has clear pictures and instructions to guide the installer throughout the whole process. Bolt-on easy installation, no modification. Attributes: GTIN: 00648044885964 Brand Name: HPS Performance Add-On HPS Filter: HPS-4275 Extended Information: Country of Origin: China Emissions : Electronically Announced Life Cycle Status: Available To Order Packing Information: Quantity of Each: 1 Package UOM: EA Dimension: 24 x 12 x 10 inches Weight: 10 lb

The All-New HPS Performance 827 Series Air Intake Kit (Red, Part # 827-672R) for 2018-2019 Kia Stinger 3.3L V6 Twin Turbo offers a free-flowing 2-3/4 inch mandrel-bent aluminum tube induction system designed to produce dyno proven performance gains +21.4 Whp horsepower, +20.6 Ft/lbs torque and improve throttle response while maintaining safe air fuel ratio. The heavy duty powder coated steel heat shield integrates with the factory fresh air scoop to direct cold air to the air filters for the best cooling effect. The included installation manual has clear pictures and instructions to guide the installer throughout the whole process. The kit does NOT require tuning and does not trigger CEL light. No modification is required during the installation. HPS light weight mandrel-bent aluminum alloy tubes replace the stock restrictive air box and optimize the air flow with long lasting durability. HPS Performance 827 Series air intake kit features race proven reinforced silicone hoses and industrial grade 100% stainless steel T-bolt clamps which ensures reliability, even during the most extreme driving conditions. The All-New HPS Performance Air Filter is designed with performance in mind, delivering excellent filtration without sacrificing air flow. All HPS Performance Air Filters are made in the United States. Fine-tuned by HPS Performance to deliver dyno proven gains, increase horsepower +21.4 whp, torque +20.6 ft/lbs and improve throttle response; Does NOT require tuning after the install. Light weight 2-3/4 inch mandrel-bent aluminum alloy piping replaces the stock restrictive air box and optimize the air flow Features HPS Performance race proven reinforced silicone hoses, industrial grade 100% stainless steel T-bolt clamps and Washable/Reusable Performance Air Filter. Heavy duty powder coated steel heat integrates with fresh air scoop forces cool air for the best cooling effect. The included installation manual has clear pictures and instructions to guide the installer throughout the whole process. Bolt-on easy installation, no modification. Attributes: GTIN: 00648044887593 Brand Name: HPS Performance Add-On HPS Filter: HPS-4275 Extended Information: Country of Origin: China Emissions : Electronically Announced Life Cycle Status: Available To Order Packing Information: Quantity of Each: 1 Package UOM: EA Dimension: 28 x 16 x 10 inches Weight: 13 lb

Built for performance and show, the HPS Red shortram air intake with heat shield for 1991-1999 Mitsubishi 3000GT DOHC V6 3.0L Non Turbo offers a free-flowing mandrel-bent aluminum tube induction system designed to increase horsepower, torque and improve throttle response while maintaining safe air fuel ratio. The heat shield included in the kit maximize the cooling effect. Compare to the cold air intake, HPS short ram cool air intake is a convenient way to change your intake in case of rainy days where water might be inducted into your cold air system. The included installation manual has clear pictures and instructions to guide the installer throughout the whole process. The kit does NOT require tuning and does not trigger CEL light. No modification is required during the installation. HPS light weight mandrel-bent aluminum alloy tube replaces the stock restrictive air box and optimize the air flow with excellent heat dissipation and long lasting durability. HPS shortram air intake kit features HPS signature race proven reinforced silicone hoses and industrial grade 100% stainless steel T-bolt clamps which ensures reliability, even during the most extreme driving conditions. The All-New HPS Performance Air Filters are made in the United State and are designed with performance in mind, delivering excellent filtration without sacrificing air flow. Washable and reusable. NOT CARB Complaint. Vehicle Application: 1991-1999 Mitsubishi 3000GT DOHC V6 3.0L Non Turbo . Fine-tuned by HPS to deliver performance gains, increase horsepower, torque and improve throttle response; Does NOT require tuning after the install. Light weight mandrel-bent aluminum alloy piping replaces the stock restrictive air box and optimize the air flow Features HPS signature race proven reinforced silicone hoses and industrial grade 100% stainless steel T-bolt clamps. HPS Performance high flow air filter is washable and reusable. The included installation manual has clear pictures and instructions to guide the installer throughout the whole process. Bolt-on easy installation, no modification. Attributes: GTIN: 00648044887296 Brand Name: HPS Performance Add-On HPS Filter: HPS-4276 Extended Information: Country of Origin: China Emissions : Electronically Announced Life Cycle Status: Available To Order Packing Information: Quantity of Each: 1 Package UOM: EA Dimension: 12 x 12 x 12 inches Weight: 6 lb

The All-New HPS Performance 837 Series Cold Air Intake Kit (Blue, Part # 837-579BL) for 1998-2002 Honda Accord 2.3L DX EX LX VP SE offers a free-flowing 3 inch mandrel-bent aluminum tube induction system by relocating HPS Performance Air Filter outside of the engine compartment to deliver the coolest air inlet temperature. It can be converted into shortram intake. Compare to the tradiational intake setup, HPS Performance 837 Series cold air intake kit delivers cooler air with more oxygen, which translates into a more intense explosion in the vehicle combustion chamber to increase horsepower, torque and improve throttle response while maintaining safe air fuel ratio. The included installation manual has clear pictures and instructions to guide the installer throughout the whole process. The kit does NOT require tuning and does not trigger CEL light. No modification is required during the installation. HPS light weight mandrel-bent aluminum alloy tube replaces the stock restrictive air box and optimize the air flow with excellent heat dissipation and long lasting durability. HPS Performance 837 Series cold air intake kit features race proven reinforced silicone hoses and industrial grade 100% stainless steel T-bolt clamps which ensures reliability, even during the most extreme driving conditions. The All-New HPS Performance Air Filter is designed with performance in mind, delivering excellent filtration without sacrificing air flow. All HPS Performance Air filter are made in the United States. Fine-tuned by HPS Performance to increase horsepower, torque and improve throttle response. Does NOT require tuning after the install. Light weight 3 inch mandrel-bent aluminum alloy piping replaces the stock restrictive air box and optimize the air flow with excellent heat dissipation and long lasting durability. Features HPS Performance race proven reinforced silicone hoses, industrial grade 100% stainless steel T-bolt clamps and Washable/Reusable Performance Air Filter. Can be converted into shortram intake. The included installation manual has clear pictures and instructions to guide the installer throughout the whole process. Bolt-on easy installation, no modification. Attributes: GTIN: 00648044887944 Brand Name: HPS Performance Add-On HPS Filter: HPS-4275 Extended Information: Country of Origin: China Life Cycle Status: Available To Order Emissions : Electronically Announced Packing Information: Quantity of Each: 1 Package UOM: EA Dimension: 24 x 12 x 10 inches Weight: 5 lb

Built for performance and show, the HPS Red cold air intake kit (converts into shortram) for 2003-2007 Honda Accord 3.0L V6 relocates HPS Performance Air Filter outside of the engine compartment to deliver the coolest air inlet temperatures. Compare to the tradiational shortram air intake, HPS long ram cool air intake delivers cooler air with more oxygen, which translates into a more intense explosion in the vehicle combustion chamber to increase horsepower, torque and improve throttle response. The included installation manual has clear pictures and instructions to guide the installer throughout the whole process. The kit does NOT require tuning and no modification is required, however, removal of front bumper is necessary during the installation. HPS light weight mandrel-bent aluminum alloy tube replaces the stock restrictive air box and optimize the air flow with excellent heat dissipation and long lasting durability. HPS cold air induction system features HPS signature race proven reinforced silicone hoses and industrial grade 100% stainless steel T-bolt clamps which ensures reliability, even during the most extreme driving conditions. The All-New HPS Performance Air Filters are made in the United State and are designed with performance in mind, delivering excellent filtration without sacrificing air flow. Washable and reusable. NOT CARB Complaint. Vehicle Application: 2003-2007 Honda Accord 3.0L V6. Fine-tuned by HPS to deliver performance gains, increase horsepower, torque and improve throttle response; Does NOT require tuning after the install. Light weight mandrel-bent aluminum alloy piping replaces the stock restrictive air box and optimize the air flow. Can be converted into shortram intake. Features HPS signature race proven reinforced silicone hoses and industrial grade 100% stainless steel T-bolt clamps. HPS Performance high flow air filter is washable and reusable. The included installation manual has clear pictures and instructions to guide the installer throughout the whole process. No modification is required, however, removal of front bumper is necessary during the installation. Attributes: GTIN: 00648044885575 Brand Name: HPS Performance Add-On HPS Filter: HPS-4275 Extended Information: Country of Origin: China Emissions : Electronically Announced Life Cycle Status: Available To Order Packing Information: Quantity of Each: 1 Package UOM: EA Dimension: 24 x 12 x 10 inches Weight: 8 lb

Built for performance and show, the HPS Polish cold air intake kit (converts into shortram) for 2003-2007 Honda Accord 3.0L V6 relocates HPS Performance Air Filter outside of the engine compartment to deliver the coolest air inlet temperatures. Compare to the tradiational shortram air intake, HPS long ram cool air intake delivers cooler air with more oxygen, which translates into a more intense explosion in the vehicle combustion chamber to increase horsepower, torque and improve throttle response. The included installation manual has clear pictures and instructions to guide the installer throughout the whole process. The kit does NOT require tuning and no modification is required, however, removal of front bumper is necessary during the installation. HPS light weight mandrel-bent aluminum alloy tube replaces the stock restrictive air box and optimize the air flow with excellent heat dissipation and long lasting durability. HPS cold air induction system features HPS signature race proven reinforced silicone hoses and industrial grade 100% stainless steel T-bolt clamps which ensures reliability, even during the most extreme driving conditions. The All-New HPS Performance Air Filters are made in the United State and are designed with performance in mind, delivering excellent filtration without sacrificing air flow. Washable and reusable. NOT CARB Complaint. Vehicle Application: 2003-2007 Honda Accord 3.0L V6. Fine-tuned by HPS to deliver performance gains, increase horsepower, torque and improve throttle response; Does NOT require tuning after the install. Light weight mandrel-bent aluminum alloy piping replaces the stock restrictive air box and optimize the air flow. Can be converted into shortram intake. Features HPS signature race proven reinforced silicone hoses and industrial grade 100% stainless steel T-bolt clamps. HPS Performance high flow air filter is washable and reusable. The included installation manual has clear pictures and instructions to guide the installer throughout the whole process. No modification is required, however, removal of front bumper is necessary during the installation. Attributes: GTIN: 00648044885582 Brand Name: HPS Performance Add-On HPS Filter: HPS-4275 Extended Information: Country of Origin: China Emissions : Electronically Announced Life Cycle Status: Available To Order Packing Information: Quantity of Each: 1 Package UOM: EA Dimension: 24 x 12 x 10 inches Weight: 8 lb

The All-New HPS Performance 827 Series Air Intake Kit (Blue, Part # 827-672BL) for 2018-2019 Kia Stinger 3.3L V6 Twin Turbo offers a free-flowing 2-3/4 inch mandrel-bent aluminum tube induction system designed to produce dyno proven performance gains +21.4 Whp horsepower, +20.6 Ft/lbs torque and improve throttle response while maintaining safe air fuel ratio. The heavy duty powder coated steel heat shield integrates with the factory fresh air scoop to direct cold air to the air filters for the best cooling effect. The included installation manual has clear pictures and instructions to guide the installer throughout the whole process. The kit does NOT require tuning and does not trigger CEL light. No modification is required during the installation. HPS light weight mandrel-bent aluminum alloy tubes replace the stock restrictive air box and optimize the air flow with long lasting durability. HPS Performance 827 Series air intake kit features race proven reinforced silicone hoses and industrial grade 100% stainless steel T-bolt clamps which ensures reliability, even during the most extreme driving conditions. The All-New HPS Performance Air Filter is designed with performance in mind, delivering excellent filtration without sacrificing air flow. All HPS Performance Air Filters are made in the United States. Fine-tuned by HPS Performance to deliver dyno proven gains, increase horsepower +21.4 whp, torque +20.6 ft/lbs and improve throttle response; Does NOT require tuning after the install. Light weight 2-3/4 inch mandrel-bent aluminum alloy piping replaces the stock restrictive air box and optimize the air flow Features HPS Performance race proven reinforced silicone hoses, industrial grade 100% stainless steel T-bolt clamps and Washable/Reusable Performance Air Filter. Heavy duty powder coated steel heat integrates with fresh air scoop forces cool air for the best cooling effect. The included installation manual has clear pictures and instructions to guide the installer throughout the whole process. Bolt-on easy installation, no modification. Attributes: GTIN: 00648044887586 Brand Name: HPS Performance Add-On HPS Filter: HPS-4275 Extended Information: Country of Origin: China Emissions : Electronically Announced Life Cycle Status: Available To Order Packing Information: Quantity of Each: 1 Package UOM: EA Dimension: 28 x 16 x 10 inches Weight: 13 lb

The All-New HPS Performance 827 Series Air Intake Kit (Polish, Part # 827-511P) for 2006-2011 Lexus GS350 3.5L V6 offers a free-flowing 3 inch mandrel-bent aluminum tube induction system designed to increase horsepower, torque and improve throttle response while maintaining safe air fuel ratio. The included installation manual has clear pictures and instructions to guide the installer throughout the whole process. The kit does NOT require tuning and does not trigger CEL light. No modification is required during the installation. HPS light weight mandrel-bent aluminum alloy tube replaces the stock restrictive air box and optimize the air flow with excellent heat dissipation and long lasting durability. HPS Performance 827 Series air intake kit features race proven reinforced silicone hoses and industrial grade 100% stainless steel T-bolt clamps which ensures reliability, even during the most extreme driving conditions. The All-New HPS Performance Air Filter is designed with performance in mind, delivering excellent filtration without sacrificing air flow. All HPS Performance Air Filter are made in the United States. Fine-tuned by HPS Performance to increase horsepower, torque and improve throttle response. Does NOT require tuning after the install. Light weight 3 inch mandrel-bent aluminum alloy piping replaces the stock restrictive air box and optimize the air flow with excellent heat dissipation and long lasting durability. Features HPS Performance race proven reinforced silicone hoses, industrial grade 100% stainless steel T-bolt clamps and Washable/Reusable Performance Air Filter. The included installation manual has clear pictures and instructions to guide the installer throughout the whole process. Bolt-on easy installation, no modification. Attributes: GTIN: 00648044889276 Brand Name: HPS Performance Add-On HPS Filter: HPS-4276 Extended Information: Country of Origin: China Emissions : Electronically Announced Life Cycle Status: Available To Order Packing Information: Quantity of Each: 1 Package UOM: EA Dimension: 24 x 12 x 10 inches Weight: 8 lb

Nissan 09-20 370Z 3.7L VQ37VHR HPS Red Silicone Air Intake Hose Post MAF Tube replaces the stock OEM restrictive hose with high temp reinforced silicon material. Unlike other aftermarket air intake kits, HPS post MAF silicone hoses improve air flow and reduce heat soak while keeping the stock well designed air box perform at high efficient level. Without any re-tuning, the HPS silicone post MAF air intake Tube deliver dyno-proven performance gains of +6.77 Whp, +6.38 Ft/Lbs. This product fits Nissan 2009-2020 370Z 3.7L VQ37VHR. Without any re-tuning, the HPS silicone post MAF air intake tube delivers dyno-proven performance gains +6.77 Whp, +6.38 Ft/lbs This silicone intake hose does not trigger check engine light; installation time is approximately 45 minutes Includes HPS industrial grade 100 percent stainless steel t-bolt clamps for easy installation. Made of HPS Performance race proven high temperature reinforced silicone material. Replaces the stock OEM restrictive rubber Post MAF intake hose, improve air flow and reduce heat soak while keeping the stock well designed air box perform at high efficient level Attributes: GTIN: 00648044852249 Brand Name: HPS Performance Color: Red Extended Information: Country of Origin: China Emissions : Electronically Announced Life Cycle Status: Available To Order Packing Information: Quantity of Each: 1 Package UOM: EA Dimension: 16 x 10 x 6 inches Weight: 3 lb

Nissan 09-20 370Z 3.7L VQ37VHR HPS Blue Silicone Air Intake Hose Post MAF Tube replaces the stock OEM restrictive hose with high temp reinforced silicon material. Unlike other aftermarket air intake kits, HPS post MAF silicone hoses improve air flow and reduce heat soak while keeping the stock well designed air box perform at high efficient level. Without any re-tuning, the HPS silicone post MAF air intake Tube deliver dyno-proven performance gains of +6.77 Whp, +6.38 Ft/Lbs. This product fits Nissan 2009-2020 370Z 3.7L VQ37VHR. Made of HPS Performance race proven high temperature reinforced silicone material. Replaces the stock OEM restrictive rubber Post MAF intake hose, improve air flow and reduce heat soak while keeping the stock well designed air box perform at high efficient level Without any re-tuning, the HPS silicone post MAF air intake tube delivers dyno-proven performance gains +6.77 Whp, +6.38 Ft/lbs This silicone intake hose does not trigger check engine light; installation time is approximately 45 minutes Includes HPS industrial grade 100 percent stainless steel t-bolt clamps for easy installation. Attributes: GTIN: 00648044852232 Brand Name: HPS Performance Color: Blue Extended Information: Country of Origin: China Emissions : Electronically Announced Life Cycle Status: Available To Order Packing Information: Quantity of Each: 1 Package UOM: EA Dimension: 16 x 10 x 6 inches Weight: 3 lb

Nissan 09-20 370Z 3.7L VQ37VHR HPS Black Silicone Air Intake Hose Post MAF Tube replaces the stock OEM restrictive hose with high temp reinforced silicon material. Unlike other aftermarket air intake kits, HPS post MAF silicone hoses improve air flow and reduce heat soak while keeping the stock well designed air box perform at high efficient level. Without any re-tuning, the HPS silicone post MAF air intake Tube deliver dyno-proven performance gains of +6.77 Whp, +6.38 Ft/Lbs. This product fits Nissan 2009-2020 370Z 3.7L VQ37VHR. Made of HPS Performance race proven high temperature reinforced silicone material. Replaces the stock OEM restrictive rubber Post MAF intake hose, improve air flow and reduce heat soak while keeping the stock well designed air box perform at high efficient level Without any re-tuning, the HPS silicone post MAF air intake tube delivers dyno-proven performance gains +6.77 Whp, +6.38 Ft/lbs This silicone intake hose does not trigger check engine light; installation time is approximately 45 minutes Includes HPS industrial grade 100 percent stainless steel t-bolt clamps for easy installation. Attributes: GTIN: 00648044852225 Brand Name: HPS Performance Color: Black Extended Information: Country of Origin: China Emissions : Electronically Announced Life Cycle Status: Available To Order Packing Information: Quantity of Each: 1 Package UOM: EA Dimension: 16 x 10 x 6 inches Weight: 3 lb

The All-New HPS Performance 837 Series Cold Air Intake Kit (Black, Part # 837-689WB) for 2013-2016 Dodge Dart 2.0L Non Turbo offers a free-flowing 3 inch mandrel-bent aluminum tube induction system by relocating HPS Performance Air Filter outside of the engine compartment to deliver the coolest air inlet temperature. Compare to the tradiational intake setup, HPS Performance 837 Series cold air intake kit delivers cooler air with more oxygen, which translates into a more intense explosion in the vehicle combustion chamber to produce dyno proven performance gains - increase horsepower +9.6 whp , torque +9.2 ft/lbs and improve throttle response while maintaining safe air fuel ratio. The included installation manual has clear pictures and instructions to guide the installer throughout the whole process. The kit does NOT require tuning and does not trigger CEL light. No modification is required during the installation. HPS light weight mandrel-bent aluminum alloy tube replaces the stock restrictive air box and optimize the air flow with excellent heat dissipation and long lasting durability. HPS Performance 837 Series cold air intake kit features race proven reinforced silicone hoses and industrial grade 100% stainless steel T-bolt clamps which ensures reliability, even during the most extreme driving conditions. The All-New HPS Performance Air Filter is designed with performance in mind, delivering excellent filtration without sacrificing air flow. All HPS Performance Air Filter are made in the United States. Fine-tuned by HPS Performance to produce dyno proven performance gains - increase horsepower +9.6 whp , torque +9.2 ft/lbs and improve throttle response. Does NOT require tuning after the install. Light weight 3 inch mandrel-bent aluminum alloy piping replaces the stock restrictive air box and optimize the air flow with excellent heat dissipation and long lasting durability. Features HPS Performance race proven reinforced silicone hoses, industrial grade 100% stainless steel T-bolt clamps and Washable/Reusable Performance Air Filter. The included installation manual has clear pictures and instructions to guide the installer throughout the whole process. Bolt-on easy installation, no modification. Attributes: GTIN: 00648044890456 Brand Name: HPS Performance Add-On HPS Filter: HPS-4276 Extended Information: Country of Origin: China Emissions : Electronically Announced Life Cycle Status: Available To Order Packing Information: Quantity of Each: 1 Package UOM: EA Dimension: 24 x 12 x 10 inches Weight: 5 lb

The All-New HPS Performance 837 Series Cold Air Intake Kit (Red, Part # 837-689R) for 2013-2016 Dodge Dart 2.0L Non Turbo offers a free-flowing 3 inch mandrel-bent aluminum tube induction system by relocating HPS Performance Air Filter outside of the engine compartment to deliver the coolest air inlet temperature. Compare to the tradiational intake setup, HPS Performance 837 Series cold air intake kit delivers cooler air with more oxygen, which translates into a more intense explosion in the vehicle combustion chamber to produce dyno proven performance gains - increase horsepower +9.6 whp , torque +9.2 ft/lbs and improve throttle response while maintaining safe air fuel ratio. The included installation manual has clear pictures and instructions to guide the installer throughout the whole process. The kit does NOT require tuning and does not trigger CEL light. No modification is required during the installation. HPS light weight mandrel-bent aluminum alloy tube replaces the stock restrictive air box and optimize the air flow with excellent heat dissipation and long lasting durability. HPS Performance 837 Series cold air intake kit features race proven reinforced silicone hoses and industrial grade 100% stainless steel T-bolt clamps which ensures reliability, even during the most extreme driving conditions. The All-New HPS Performance Air Filter is designed with performance in mind, delivering excellent filtration without sacrificing air flow. All HPS Performance Air Filter are made in the United States. Fine-tuned by HPS Performance to produce dyno proven performance gains - increase horsepower +9.6 whp , torque +9.2 ft/lbs and improve throttle response. Does NOT require tuning after the install. Light weight 3 inch mandrel-bent aluminum alloy piping replaces the stock restrictive air box and optimize the air flow with excellent heat dissipation and long lasting durability. Features HPS Performance race proven reinforced silicone hoses, industrial grade 100% stainless steel T-bolt clamps and Washable/Reusable Performance Air Filter. The included installation manual has clear pictures and instructions to guide the installer throughout the whole process. Bolt-on easy installation, no modification. Attributes: GTIN: 00648044890449 Brand Name: HPS Performance Add-On HPS Filter: HPS-4276 Extended Information: Country of Origin: China Emissions : Electronically Announced Life Cycle Status: Available To Order Packing Information: Quantity of Each: 1 Package UOM: EA Dimension: 24 x 12 x 10 inches Weight: 5 lb

The All-New HPS Performance 837 Series Cold Air Intake Kit (Polish, Part # 837-689P) for 2013-2016 Dodge Dart 2.0L Non Turbo offers a free-flowing 3 inch mandrel-bent aluminum tube induction system by relocating HPS Performance Air Filter outside of the engine compartment to deliver the coolest air inlet temperature. Compare to the tradiational intake setup, HPS Performance 837 Series cold air intake kit delivers cooler air with more oxygen, which translates into a more intense explosion in the vehicle combustion chamber to produce dyno proven performance gains - increase horsepower +9.6 whp , torque +9.2 ft/lbs and improve throttle response while maintaining safe air fuel ratio. The included installation manual has clear pictures and instructions to guide the installer throughout the whole process. The kit does NOT require tuning and does not trigger CEL light. No modification is required during the installation. HPS light weight mandrel-bent aluminum alloy tube replaces the stock restrictive air box and optimize the air flow with excellent heat dissipation and long lasting durability. HPS Performance 837 Series cold air intake kit features race proven reinforced silicone hoses and industrial grade 100% stainless steel T-bolt clamps which ensures reliability, even during the most extreme driving conditions. The All-New HPS Performance Air Filter is designed with performance in mind, delivering excellent filtration without sacrificing air flow. All HPS Performance Air Filter are made in the United States. Fine-tuned by HPS Performance to produce dyno proven performance gains - increase horsepower +9.6 whp , torque +9.2 ft/lbs and improve throttle response. Does NOT require tuning after the install. Light weight 3 inch mandrel-bent aluminum alloy piping replaces the stock restrictive air box and optimize the air flow with excellent heat dissipation and long lasting durability. Features HPS Performance race proven reinforced silicone hoses, industrial grade 100% stainless steel T-bolt clamps and Washable/Reusable Performance Air Filter. The included installation manual has clear pictures and instructions to guide the installer throughout the whole process. Bolt-on easy installation, no modification. Attributes: GTIN: 00648044890432 Brand Name: HPS Performance Add-On HPS Filter: HPS-4276 Extended Information: Country of Origin: China Emissions : Electronically Announced Life Cycle Status: Available To Order Packing Information: Quantity of Each: 1 Package UOM: EA Dimension: 24 x 12 x 10 inches Weight: 5 lb

The All-New HPS Performance 837 Series Cold Air Intake Kit (Blue, Part # 837-689BL) for 2013-2016 Dodge Dart 2.0L Non Turbo offers a free-flowing 3 inch mandrel-bent aluminum tube induction system by relocating HPS Performance Air Filter outside of the engine compartment to deliver the coolest air inlet temperature. Compare to the tradiational intake setup, HPS Performance 837 Series cold air intake kit delivers cooler air with more oxygen, which translates into a more intense explosion in the vehicle combustion chamber to produce dyno proven performance gains - increase horsepower +9.6 whp , torque +9.2 ft/lbs and improve throttle response while maintaining safe air fuel ratio. The included installation manual has clear pictures and instructions to guide the installer throughout the whole process. The kit does NOT require tuning and does not trigger CEL light. No modification is required during the installation. HPS light weight mandrel-bent aluminum alloy tube replaces the stock restrictive air box and optimize the air flow with excellent heat dissipation and long lasting durability. HPS Performance 837 Series cold air intake kit features race proven reinforced silicone hoses and industrial grade 100% stainless steel T-bolt clamps which ensures reliability, even during the most extreme driving conditions. The All-New HPS Performance Air Filter is designed with performance in mind, delivering excellent filtration without sacrificing air flow. All HPS Performance Air Filter are made in the United States. Light weight 3 inch mandrel-bent aluminum alloy piping replaces the stock restrictive air box and optimize the air flow with excellent heat dissipation and long lasting durability. Features HPS Performance race proven reinforced silicone hoses, industrial grade 100% stainless steel T-bolt clamps and Washable/Reusable Performance Air Filter. The included installation manual has clear pictures and instructions to guide the installer throughout the whole process. Bolt-on easy installation, no modification. Fine-tuned by HPS Performance to produce dyno proven performance gains - increase horsepower +9.6 whp , torque +9.2 ft/lbs and improve throttle response. Does NOT require tuning after the install. Attributes: GTIN: 00648044890425 Brand Name: HPS Performance Add-On HPS Filter: HPS-4276 Extended Information: Country of Origin: China Emissions : Electronically Announced Life Cycle Status: Available To Order Packing Information: Quantity of Each: 1 Package UOM: EA Dimension: 24 x 12 x 10 inches Weight: 5 lb

Built for performance and show, the HPS Black cold air intake kit (converts into shortram) for 2013-2017 Hyundai Veloster Turbo 1.6L relocates HPS Performance Air Filter outside of the engine compartment to deliver the coolest air inlet temperatures. Compare to the tradiational shortram air intake, HPS long ram cool air intake delivers cooler air with more oxygen, which translates into a more intense explosion in the vehicle combustion chamber to produce dyno proven performance gains +8.9 Whp horsepower, +9.4 Ft/lbs torque and improve throttle response. The included installation manual has clear pictures and instructions to guide the installer throughout the whole process. The kit does NOT require tuning and no modification is required, however, removal of front bumper is necessary during the installation. HPS light weight mandrel-bent aluminum alloy tube replaces the stock restrictive air box and optimize the air flow with excellent heat dissipation and long lasting durability. HPS cold air induction system features HPS signature race proven reinforced silicone hoses and industrial grade 100% stainless steel T-bolt clamps which ensures reliability, even during the most extreme driving conditions. The All-New HPS Performance Air Filters are made in the United State and are designed with performance in mind, delivering excellent filtration without sacrificing air flow. Washable and reusable. NOT CARB Complaint. Vehicle Application: 2013-2017 Hyundai Veloster Turbo 1.6L. Bolt-on easy installation, no modification. Includes easy to follow installation instruction. Dyno proven gains +8.9 Whp horsepower, +9.4 Ft/lbs torque and improve throttle response; Does NOT require tuning after the install. Features HPS signature race proven reinforced silicone hoses and industrial grade 100% stainless steel T-bolt clamps. HPS Performance high flow air filter is washable and reusable. Light weight mandrel-bent aluminum alloy piping replaces the stock restrictive air box and optimize the air flow. Can be converted into shortram intake. HPS Performance high flow air filter is washable and reusable. Attributes: GTIN: 00648044885322 Brand Name: HPS Performance Add-On HPS Filter: HPS-4275 Extended Information: Country of Origin: China Emissions : Electronically Announced Life Cycle Status: Available To Order Packing Information: Quantity of Each: 1 Package UOM: EA Dimension: 24 x 12 x 10 inches Weight: 7 lb

Built for performance and show, the HPS Red cold air intake kit (converts into shortram) for 2013-2017 Hyundai Veloster Turbo 1.6L relocates HPS Performance Air Filter outside of the engine compartment to deliver the coolest air inlet temperatures. Compare to the tradiational shortram air intake, HPS long ram cool air intake delivers cooler air with more oxygen, which translates into a more intense explosion in the vehicle combustion chamber to produce dyno proven performance gains +8.9 Whp horsepower, +9.4 Ft/lbs torque and improve throttle response. The included installation manual has clear pictures and instructions to guide the installer throughout the whole process. The kit does NOT require tuning and no modification is required, however, removal of front bumper is necessary during the installation. HPS light weight mandrel-bent aluminum alloy tube replaces the stock restrictive air box and optimize the air flow with excellent heat dissipation and long lasting durability. HPS cold air induction system features HPS signature race proven reinforced silicone hoses and industrial grade 100% stainless steel T-bolt clamps which ensures reliability, even during the most extreme driving conditions. The All-New HPS Performance Air Filters are made in the United State and are designed with performance in mind, delivering excellent filtration without sacrificing air flow. Washable and reusable. NOT CARB Complaint. Vehicle Application: 2013-2017 Hyundai Veloster Turbo 1.6L. Bolt-on easy installation, no modification. Includes easy to follow installation instruction. Dyno proven gains +8.9 Whp horsepower, +9.4 Ft/lbs torque and improve throttle response; Does NOT require tuning after the install. Features HPS signature race proven reinforced silicone hoses and industrial grade 100% stainless steel T-bolt clamps. HPS Performance high flow air filter is washable and reusable. Light weight mandrel-bent aluminum alloy piping replaces the stock restrictive air box and optimize the air flow. Can be converted into shortram intake. HPS Performance high flow air filter is washable and reusable. Attributes: GTIN: 00648044885339 Brand Name: HPS Performance Add-On HPS Filter: HPS-4275 Extended Information: Country of Origin: China Emissions : Electronically Announced Life Cycle Status: Available To Order Packing Information: Quantity of Each: 1 Package UOM: EA Dimension: 24 x 12 x 10 inches Weight: 7 lb

Built for performance and show, the HPS Polish cold air intake kit (converts into shortram) for 2013-2017 Hyundai Veloster Turbo 1.6L relocates HPS Performance Air Filter outside of the engine compartment to deliver the coolest air inlet temperatures. Compare to the tradiational shortram air intake, HPS long ram cool air intake delivers cooler air with more oxygen, which translates into a more intense explosion in the vehicle combustion chamber to produce dyno proven performance gains +8.9 Whp horsepower, +9.4 Ft/lbs torque and improve throttle response. The included installation manual has clear pictures and instructions to guide the installer throughout the whole process. The kit does NOT require tuning and no modification is required, however, removal of front bumper is necessary during the installation. HPS light weight mandrel-bent aluminum alloy tube replaces the stock restrictive air box and optimize the air flow with excellent heat dissipation and long lasting durability. HPS cold air induction system features HPS signature race proven reinforced silicone hoses and industrial grade 100% stainless steel T-bolt clamps which ensures reliability, even during the most extreme driving conditions. The All-New HPS Performance Air Filters are made in the United State and are designed with performance in mind, delivering excellent filtration without sacrificing air flow. Washable and reusable. NOT CARB Complaint. Vehicle Application: 2013-2017 Hyundai Veloster Turbo 1.6L. Bolt-on easy installation, no modification. Includes easy to follow installation instruction. Dyno proven gains +8.9 Whp horsepower, +9.4 Ft/lbs torque and improve throttle response; Does NOT require tuning after the install. Features HPS signature race proven reinforced silicone hoses and industrial grade 100% stainless steel T-bolt clamps. Light weight mandrel-bent aluminum alloy piping replaces the stock restrictive air box and optimize the air flow. Can be converted into shortram intake. HPS Performance high flow air filter is washable and reusable. Attributes: GTIN: 00648044885346 Brand Name: HPS Performance Add-On HPS Filter: HPS-4275 Extended Information: Country of Origin: China Emissions : Electronically Announced Life Cycle Status: Available To Order Packing Information: Quantity of Each: 1 Package UOM: EA Dimension: 24 x 12 x 10 inches Weight: 7 lb

Built for performance and show, the HPS Blue cold air intake kit (converts into shortram) for 2013-2017 Hyundai Veloster Turbo 1.6L relocates HPS Performance Air Filter outside of the engine compartment to deliver the coolest air inlet temperatures. Compare to the tradiational shortram air intake, HPS long ram cool air intake delivers cooler air with more oxygen, which translates into a more intense explosion in the vehicle combustion chamber to produce dyno proven performance gains +8.9 Whp horsepower, +9.4 Ft/lbs torque and improve throttle response. The included installation manual has clear pictures and instructions to guide the installer throughout the whole process. The kit does NOT require tuning and no modification is required, however, removal of front bumper is necessary during the installation. HPS light weight mandrel-bent aluminum alloy tube replaces the stock restrictive air box and optimize the air flow with excellent heat dissipation and long lasting durability. HPS cold air induction system features HPS signature race proven reinforced silicone hoses and industrial grade 100% stainless steel T-bolt clamps which ensures reliability, even during the most extreme driving conditions. The All-New HPS Performance Air Filters are made in the United State and are designed with performance in mind, delivering excellent filtration without sacrificing air flow. Washable and reusable. NOT CARB Complaint. Vehicle Application: 2013-2017 Hyundai Veloster Turbo 1.6L. Bolt-on easy installation, no modification. Includes easy to follow installation instruction. Dyno proven gains +8.9 Whp horsepower, +9.4 Ft/lbs torque and improve throttle response; Does NOT require tuning after the install. Features HPS signature race proven reinforced silicone hoses and industrial grade 100% stainless steel T-bolt clamps. HPS Performance high flow air filter is washable and reusable. Light weight mandrel-bent aluminum alloy piping replaces the stock restrictive air box and optimize the air flow. Can be converted into shortram intake. HPS Performance high flow air filter is washable and reusable. Attributes: GTIN: 00648044885353 Brand Name: HPS Performance Add-On HPS Filter: HPS-4275 Extended Information: Country of Origin: China Emissions : Electronically Announced Life Cycle Status: Available To Order Packing Information: Quantity of Each: 1 Package UOM: EA Dimension: 24 x 12 x 10 inches Weight: 7 lb

The All-New HPS Performance 837 Series Cold Air Intake Kit (Black, Part # 837-602WB) for 2016-2019 Honda Civic Non Si 1.5T Turbo offers a free-flowing 3 inch mandrel-bent aluminum tube induction system by relocating HPS Performance Air Filter outside of the engine compartment to deliver the coolest air inlet temperature. It can be converted into shortram intake. Compare to the tradiational intake setup, HPS Performance 837 Series cold air intake kit delivers cooler air with more oxygen, which translates into a more intense explosion in the vehicle combustion chamber to produce dyno proven performance gains - increase horsepower +9.3 whp , torque +13.7 ft/lbs and improve throttle response while maintaining safe air fuel ratio. The included installation manual has clear pictures and instructions to guide the installer throughout the whole process. The kit does NOT require tuning and does not trigger CEL light. No modification is required during the installation. HPS light weight mandrel-bent aluminum alloy tube replaces the stock restrictive air box and optimize the air flow with excellent heat dissipation and long lasting durability. HPS Performance 837 Series cold air intake kit features race proven reinforced silicone hoses and industrial grade 100% stainless steel T-bolt clamps which ensures reliability, even during the most extreme driving conditions. The All-New HPS Performance Air Filter is designed with performance in mind, delivering excellent filtration without sacrificing air flow. All HPS Performance Air filter are made in the United States. Fine-tuned by HPS Performance to produce dyno proven performance gains - increase horsepower +9.3 whp , torque +13.7 ft/lbs and improve throttle response. Does NOT require tuning after the install. Light weight 3 inch mandrel-bent aluminum alloy piping replaces the stock restrictive air box and optimize the air flow with excellent heat dissipation and long lasting durability. Features HPS Performance race proven reinforced silicone hoses, industrial grade 100% stainless steel T-bolt clamps and Washable/Reusable Performance Air Filter. Can be converted into shortram intake. The included installation manual has clear pictures and instructions to guide the installer throughout the whole process. Bolt-on easy installation, no modification. Attributes: GTIN: 00648044887456 Brand Name: HPS Performance Add-On HPS Filter: HPS-4274 Extended Information: Country of Origin: China Emissions : Electronically Announced Life Cycle Status: Available To Order Packing Information: Quantity of Each: 1 Package UOM: EA Dimension: 24 x 12 x 10 inches Weight: 6 lb

The All-New HPS Performance 837 Series Cold Air Intake Kit (Red, Part # 837-602R) for 2016-2019 Honda Civic Non Si 1.5T Turbo offers a free-flowing 3 inch mandrel-bent aluminum tube induction system by relocating HPS Performance Air Filter outside of the engine compartment to deliver the coolest air inlet temperature. It can be converted into shortram intake. Compare to the tradiational intake setup, HPS Performance 837 Series cold air intake kit delivers cooler air with more oxygen, which translates into a more intense explosion in the vehicle combustion chamber to produce dyno proven performance gains - increase horsepower +9.3 whp , torque +13.7 ft/lbs and improve throttle response while maintaining safe air fuel ratio. The included installation manual has clear pictures and instructions to guide the installer throughout the whole process. The kit does NOT require tuning and does not trigger CEL light. No modification is required during the installation. HPS light weight mandrel-bent aluminum alloy tube replaces the stock restrictive air box and optimize the air flow with excellent heat dissipation and long lasting durability. HPS Performance 837 Series cold air intake kit features race proven reinforced silicone hoses and industrial grade 100% stainless steel T-bolt clamps which ensures reliability, even during the most extreme driving conditions. The All-New HPS Performance Air Filter is designed with performance in mind, delivering excellent filtration without sacrificing air flow. All HPS Performance Air filter are made in the United States. Fine-tuned by HPS Performance to produce dyno proven performance gains - increase horsepower +9.3 whp , torque +13.7 ft/lbs and improve throttle response. Does NOT require tuning after the install. Light weight 3 inch mandrel-bent aluminum alloy piping replaces the stock restrictive air box and optimize the air flow with excellent heat dissipation and long lasting durability. Features HPS Performance race proven reinforced silicone hoses, industrial grade 100% stainless steel T-bolt clamps and Washable/Reusable Performance Air Filter. Can be converted into shortram intake. The included installation manual has clear pictures and instructions to guide the installer throughout the whole process. Bolt-on easy installation, no modification. Attributes: GTIN: 00648044887470 Brand Name: HPS Performance Add-On HPS Filter: HPS-4274 Extended Information: Country of Origin: China Emissions : Electronically Announced Life Cycle Status: Available To Order Packing Information: Quantity of Each: 1 Package UOM: EA Dimension: 24 x 12 x 10 inches Weight: 6 lb

The All-New HPS Performance 837 Series Cold Air Intake Kit (Polish, Part # 837-602P) for 2016-2019 Honda Civic Non Si 1.5T Turbo offers a free-flowing 3 inch mandrel-bent aluminum tube induction system by relocating HPS Performance Air Filter outside of the engine compartment to deliver the coolest air inlet temperature. It can be converted into shortram intake. Compare to the tradiational intake setup, HPS Performance 837 Series cold air intake kit delivers cooler air with more oxygen, which translates into a more intense explosion in the vehicle combustion chamber to produce dyno proven performance gains - increase horsepower +9.3 whp , torque +13.7 ft/lbs and improve throttle response while maintaining safe air fuel ratio. The included installation manual has clear pictures and instructions to guide the installer throughout the whole process. The kit does NOT require tuning and does not trigger CEL light. No modification is required during the installation. HPS light weight mandrel-bent aluminum alloy tube replaces the stock restrictive air box and optimize the air flow with excellent heat dissipation and long lasting durability. HPS Performance 837 Series cold air intake kit features race proven reinforced silicone hoses and industrial grade 100% stainless steel T-bolt clamps which ensures reliability, even during the most extreme driving conditions. The All-New HPS Performance Air Filter is designed with performance in mind, delivering excellent filtration without sacrificing air flow. All HPS Performance Air filter are made in the United States. Fine-tuned by HPS Performance to produce dyno proven performance gains - increase horsepower +9.3 whp , torque +13.7 ft/lbs and improve throttle response. Does NOT require tuning after the install. Light weight 3 inch mandrel-bent aluminum alloy piping replaces the stock restrictive air box and optimize the air flow with excellent heat dissipation and long lasting durability. Features HPS Performance race proven reinforced silicone hoses, industrial grade 100% stainless steel T-bolt clamps and Washable/Reusable Performance Air Filter. Can be converted into shortram intake. The included installation manual has clear pictures and instructions to guide the installer throughout the whole process. Bolt-on easy installation, no modification. Attributes: GTIN: 00648044887449 Brand Name: HPS Performance Add-On HPS Filter: HPS-4274 Extended Information: Country of Origin: China Emissions : Electronically Announced Life Cycle Status: Available To Order Packing Information: Quantity of Each: 1 Package UOM: EA Dimension: 24 x 12 x 10 inches Weight: 6 lb

The All-New HPS Performance 837 Series Cold Air Intake Kit (Blue, Part # 837-602BL) for 2016-2019 Honda Civic Non Si 1.5T Turbo offers a free-flowing 3 inch mandrel-bent aluminum tube induction system by relocating HPS Performance Air Filter outside of the engine compartment to deliver the coolest air inlet temperature. It can be converted into shortram intake. Compare to the tradiational intake setup, HPS Performance 837 Series cold air intake kit delivers cooler air with more oxygen, which translates into a more intense explosion in the vehicle combustion chamber to produce dyno proven performance gains - increase horsepower +9.3 whp , torque +13.7 ft/lbs and improve throttle response while maintaining safe air fuel ratio. The included installation manual has clear pictures and instructions to guide the installer throughout the whole process. The kit does NOT require tuning and does not trigger CEL light. No modification is required during the installation. HPS light weight mandrel-bent aluminum alloy tube replaces the stock restrictive air box and optimize the air flow with excellent heat dissipation and long lasting durability. HPS Performance 837 Series cold air intake kit features race proven reinforced silicone hoses and industrial grade 100% stainless steel T-bolt clamps which ensures reliability, even during the most extreme driving conditions. The All-New HPS Performance Air Filter is designed with performance in mind, delivering excellent filtration without sacrificing air flow. All HPS Performance Air filter are made in the United States. Fine-tuned by HPS Performance to produce dyno proven performance gains - increase horsepower +9.3 whp , torque +13.7 ft/lbs and improve throttle response. Does NOT require tuning after the install. Light weight 3 inch mandrel-bent aluminum alloy piping replaces the stock restrictive air box and optimize the air flow with excellent heat dissipation and long lasting durability. Features HPS Performance race proven reinforced silicone hoses, industrial grade 100% stainless steel T-bolt clamps and Washable/Reusable Performance Air Filter. Can be converted into shortram intake. The included installation manual has clear pictures and instructions to guide the installer throughout the whole process. Bolt-on easy installation, no modification. Attributes: GTIN: 00648044887463 Brand Name: HPS Performance Add-On HPS Filter: HPS-4274 Extended Information: Country of Origin: China Emissions : Electronically Announced Life Cycle Status: Available To Order Packing Information: Quantity of Each: 1 Package UOM: EA Dimension: 24 x 12 x 10 inches Weight: 6 lb

Built for performance and show, the HPS Black cold air intake kit (converts into shortram) for 2007-2013 Mazda Mazdaspeed 3 2.3L Turbo relocates HPS Performance Air Filter outside of the engine compartment to deliver the coolest air inlet temperatures. Compare to the tradiational shortram air intake, HPS long ram cool air intake delivers cooler air with more oxygen, which translates into a more intense explosion in the vehicle combustion chamber to produce dyno proven performance gains +24.3 Whp horsepower, +33.1 Ft/lbs torque and improve throttle response. The included installation manual has clear pictures and instructions to guide the installer throughout the whole process. The kit does NOT require tuning and no modification is required, however, removal of front bumper is necessary during the installation. HPS light weight mandrel-bent aluminum alloy tube replaces the stock restrictive air box and optimize the air flow with excellent heat dissipation and long lasting durability. HPS cold air induction system features HPS signature race proven reinforced silicone hoses and industrial grade 100% stainless steel T-bolt clamps which ensures reliability, even during the most extreme driving conditions. The All-New HPS Performance Air Filters are made in the United State and are designed with performance in mind, delivering excellent filtration without sacrificing air flow. Washable and reusable. NOT CARB Complaint. Vehicle Application: 2007-2013 Mazda Mazdaspeed 3 2.3L Turbo. Fine-tuned by HPS to deliver dyno proven performance gains +24.3 Whp horsepower, +33.1 Ft/lbs torque and improve throttle response; Does NOT require tuning after the install. Light weight mandrel-bent aluminum alloy piping replaces the stock restrictive air box and optimize the air flow. Can be converted into shortram intake. Features HPS signature race proven reinforced silicone hoses and industrial grade 100% stainless steel T-bolt clamps. HPS Performance high flow air filter is washable and reusable. The included installation manual has clear pictures and instructions to guide the installer throughout the whole process. No modification is required, however, removal of front bumper is necessary during the installation. Attributes: GTIN: 00648044885360 Brand Name: HPS Performance Add-On HPS Filter: HPS-4275 Extended Information: Country of Origin: China Emissions : Electronically Announced Life Cycle Status: Available To Order Packing Information: Quantity of Each: 1 Package UOM: EA Dimension: 24 x 12 x 10 inches Weight: 8 lb

Built for performance and show, the HPS Red cold air intake kit (converts into shortram) for 2007-2013 Mazda Mazdaspeed 3 2.3L Turbo relocates HPS Performance Air Filter outside of the engine compartment to deliver the coolest air inlet temperatures. Compare to the tradiational shortram air intake, HPS long ram cool air intake delivers cooler air with more oxygen, which translates into a more intense explosion in the vehicle combustion chamber to produce dyno proven performance gains +24.3 Whp horsepower, +33.1 Ft/lbs torque and improve throttle response. The included installation manual has clear pictures and instructions to guide the installer throughout the whole process. The kit does NOT require tuning and no modification is required, however, removal of front bumper is necessary during the installation. HPS light weight mandrel-bent aluminum alloy tube replaces the stock restrictive air box and optimize the air flow with excellent heat dissipation and long lasting durability. HPS cold air induction system features HPS signature race proven reinforced silicone hoses and industrial grade 100% stainless steel T-bolt clamps which ensures reliability, even during the most extreme driving conditions. The All-New HPS Performance Air Filters are made in the United State and are designed with performance in mind, delivering excellent filtration without sacrificing air flow. Washable and reusable. NOT CARB Complaint. Vehicle Application: 2007-2013 Mazda Mazdaspeed 3 2.3L Turbo. Fine-tuned by HPS to deliver dyno proven performance gains +24.3 Whp horsepower, +33.1 Ft/lbs torque and improve throttle response; Does NOT require tuning after the install. Light weight mandrel-bent aluminum alloy piping replaces the stock restrictive air box and optimize the air flow. Can be converted into shortram intake. Features HPS signature race proven reinforced silicone hoses and industrial grade 100% stainless steel T-bolt clamps. HPS Performance high flow air filter is washable and reusable. The included installation manual has clear pictures and instructions to guide the installer throughout the whole process. No modification is required, however, removal of front bumper is necessary during the installation. Attributes: GTIN: 00648044885377 Brand Name: HPS Performance Add-On HPS Filter: HPS-4275 Extended Information: Country of Origin: China Emissions : Electronically Announced Life Cycle Status: Available To Order Packing Information: Quantity of Each: 1 Package UOM: EA Dimension: 24 x 12 x 10 inches Weight: 8 lb

Built for performance and show, the HPS Polish cold air intake kit (converts into shortram) for 2007-2013 Mazda Mazdaspeed 3 2.3L Turbo relocates HPS Performance Air Filter outside of the engine compartment to deliver the coolest air inlet temperatures. Compare to the tradiational shortram air intake, HPS long ram cool air intake delivers cooler air with more oxygen, which translates into a more intense explosion in the vehicle combustion chamber to produce dyno proven performance gains +24.3 Whp horsepower, +33.1 Ft/lbs torque and improve throttle response. The included installation manual has clear pictures and instructions to guide the installer throughout the whole process. The kit does NOT require tuning and no modification is required, however, removal of front bumper is necessary during the installation. HPS light weight mandrel-bent aluminum alloy tube replaces the stock restrictive air box and optimize the air flow with excellent heat dissipation and long lasting durability. HPS cold air induction system features HPS signature race proven reinforced silicone hoses and industrial grade 100% stainless steel T-bolt clamps which ensures reliability, even during the most extreme driving conditions. The All-New HPS Performance Air Filters are made in the United State and are designed with performance in mind, delivering excellent filtration without sacrificing air flow. Washable and reusable. NOT CARB Complaint. Vehicle Application: 2007-2013 Mazda Mazdaspeed 3 2.3L Turbo. Fine-tuned by HPS to deliver dyno proven performance gains +24.3 Whp horsepower, +33.1 Ft/lbs torque and improve throttle response; Does NOT require tuning after the install. Light weight mandrel-bent aluminum alloy piping replaces the stock restrictive air box and optimize the air flow. Can be converted into shortram intake. Features HPS signature race proven reinforced silicone hoses and industrial grade 100% stainless steel T-bolt clamps. HPS Performance high flow air filter is washable and reusable. The included installation manual has clear pictures and instructions to guide the installer throughout the whole process. No modification is required, however, removal of front bumper is necessary during the installation. Attributes: GTIN: 00648044885384 Brand Name: HPS Performance Add-On HPS Filter: HPS-4275 Extended Information: Country of Origin: China Emissions : Electronically Announced Life Cycle Status: Available To Order Packing Information: Quantity of Each: 1 Package UOM: EA Dimension: 24 x 12 x 10 inches Weight: 8 lb

Built for performance and show, the HPS Blue cold air intake kit (converts into shortram) for 2007-2013 Mazda Mazdaspeed 3 2.3L Turbo relocates HPS Performance Air Filter outside of the engine compartment to deliver the coolest air inlet temperatures. Compare to the tradiational shortram air intake, HPS long ram cool air intake delivers cooler air with more oxygen, which translates into a more intense explosion in the vehicle combustion chamber to produce dyno proven performance gains +24.3 Whp horsepower, +33.1 Ft/lbs torque and improve throttle response. The included installation manual has clear pictures and instructions to guide the installer throughout the whole process. The kit does NOT require tuning and no modification is required, however, removal of front bumper is necessary during the installation. HPS light weight mandrel-bent aluminum alloy tube replaces the stock restrictive air box and optimize the air flow with excellent heat dissipation and long lasting durability. HPS cold air induction system features HPS signature race proven reinforced silicone hoses and industrial grade 100% stainless steel T-bolt clamps which ensures reliability, even during the most extreme driving conditions. The All-New HPS Performance Air Filters are made in the United State and are designed with performance in mind, delivering excellent filtration without sacrificing air flow. Washable and reusable. NOT CARB Complaint. Vehicle Application: 2007-2013 Mazda Mazdaspeed 3 2.3L Turbo. Fine-tuned by HPS to deliver dyno proven performance gains +24.3 Whp horsepower, +33.1 Ft/lbs torque and improve throttle response; Does NOT require tuning after the install. Light weight mandrel-bent aluminum alloy piping replaces the stock restrictive air box and optimize the air flow. Can be converted into shortram intake. Features HPS signature race proven reinforced silicone hoses and industrial grade 100% stainless steel T-bolt clamps. HPS Performance high flow air filter is washable and reusable. The included installation manual has clear pictures and instructions to guide the installer throughout the whole process. No modification is required, however, removal of front bumper is necessary during the installation. Attributes: GTIN: 00648044885391 Brand Name: HPS Performance Add-On HPS Filter: HPS-4275 Extended Information: Country of Origin: China Emissions : Electronically Announced Life Cycle Status: Available To Order Packing Information: Quantity of Each: 1 Package UOM: EA Dimension: 24 x 12 x 10 inches Weight: 8 lb

Built for performance and show, the HPS Black cold air intake kit for 2006-2011 Honda Civic Si 2.0L relocates HPS Performance Air Filter outside of the engine compartment to deliver the coolest air inlet temperatures. Compare to the tradiational shortram air intake, HPS long ram cool air intake delivers cooler air with more oxygen, which translates into a more intense explosion in the vehicle combustion chamber to produce dyno proven performance gains +8.9 Whp horsepower, +7.1 Ft/lbs torque and improve throttle response. The included installation manual has clear pictures and instructions to guide the installer throughout the whole process. HPS silicone coolant re-route hose is included to prevent the intake pipe rubbing the stock coolant hose. The kit also includes air straightener to minimize the chance of CEL lights and the kit does NOT require tuning and no modification is required, however, removal of front bumper is necessary during the installation. HPS light weight mandrel-bent aluminum alloy tube replaces the stock restrictive air box and optimize the air flow with excellent heat dissipation and long lasting durability. HPS cold air induction system features HPS signature race proven reinforced silicone hoses and industrial grade 100% stainless steel T-bolt clamps which ensures reliability, even during the most extreme driving conditions. The All-New HPS Performance Air Filters are made in the United State and are designed with performance in mind, delivering excellent filtration without sacrificing air flow. Washable and reusable. NOT CARB Complaint. Vehicle Application: 2006-2011 Honda Civic Si 2.0L. Fine-tuned by HPS to deliver dyno proven performance gains +8.9 Whp horsepower, +7.1 Ft/lbs torque and improve throttle response; Does NOT require tuning after the install. Light weight mandrel-bent aluminum alloy piping replaces the stock restrictive air box and optimize the air flow. Features HPS signature race proven reinforced silicone hoses and industrial grade 100% stainless steel T-bolt clamps. HPS Performance high flow air filter is washable and reusable. The included installation manual has clear pictures and instructions to guide the installer throughout the whole process. Includes HPS silicone coolant re-route hose and air straightener. Attributes: GTIN: 00648044885407 Brand Name: HPS Performance Add-On HPS Filter: HPS-4275 Extended Information: Country of Origin: China Emissions : Electronically Announced Life Cycle Status: Available To Order Packing Information: Quantity of Each: 1 Package UOM: EA Dimension: 12 x 12 x 12 inches Weight: 7 lb

Built for performance and show, the HPS Red cold air intake kit for 2006-2011 Honda Civic Si 2.0L relocates HPS Performance Air Filter outside of the engine compartment to deliver the coolest air inlet temperatures. Compare to the tradiational shortram air intake, HPS long ram cool air intake delivers cooler air with more oxygen, which translates into a more intense explosion in the vehicle combustion chamber to produce dyno proven performance gains +8.9 Whp horsepower, +7.1 Ft/lbs torque and improve throttle response. The included installation manual has clear pictures and instructions to guide the installer throughout the whole process. HPS silicone coolant re-route hose is included to prevent the intake pipe rubbing the stock coolant hose. The kit also includes air straightener to minimize the chance of CEL lights and the kit does NOT require tuning and no modification is required, however, removal of front bumper is necessary during the installation. HPS light weight mandrel-bent aluminum alloy tube replaces the stock restrictive air box and optimize the air flow with excellent heat dissipation and long lasting durability. HPS cold air induction system features HPS signature race proven reinforced silicone hoses and industrial grade 100% stainless steel T-bolt clamps which ensures reliability, even during the most extreme driving conditions. The All-New HPS Performance Air Filters are made in the United State and are designed with performance in mind, delivering excellent filtration without sacrificing air flow. Washable and reusable. NOT CARB Complaint. Vehicle Application: 2006-2011 Honda Civic Si 2.0L. Fine-tuned by HPS to deliver dyno proven performance gains +8.9 Whp horsepower, +7.1 Ft/lbs torque and improve throttle response; Does NOT require tuning after the install. Light weight mandrel-bent aluminum alloy piping replaces the stock restrictive air box and optimize the air flow. Features HPS signature race proven reinforced silicone hoses and industrial grade 100% stainless steel T-bolt clamps. HPS Performance high flow air filter is washable and reusable. The included installation manual has clear pictures and instructions to guide the installer throughout the whole process. Includes HPS silicone coolant re-route hose and air straightener. Attributes: GTIN: 00648044885414 Brand Name: HPS Performance Add-On HPS Filter: HPS-4275 Extended Information: Country of Origin: China Emissions : Electronically Announced Life Cycle Status: Available To Order Packing Information: Quantity of Each: 1 Package UOM: EA Dimension: 12 x 12 x 12 inches Weight: 7 lb

Built for performance and show, the HPS Polish cold air intake kit for 2006-2011 Honda Civic Si 2.0L relocates HPS Performance Air Filter outside of the engine compartment to deliver the coolest air inlet temperatures. Compare to the tradiational shortram air intake, HPS long ram cool air intake delivers cooler air with more oxygen, which translates into a more intense explosion in the vehicle combustion chamber to produce dyno proven performance gains +8.9 Whp horsepower, +7.1 Ft/lbs torque and improve throttle response. The included installation manual has clear pictures and instructions to guide the installer throughout the whole process. HPS silicone coolant re-route hose is included to prevent the intake pipe rubbing the stock coolant hose. The kit also includes air straightener to minimize the chance of CEL lights and the kit does NOT require tuning and no modification is required, however, removal of front bumper is necessary during the installation. HPS light weight mandrel-bent aluminum alloy tube replaces the stock restrictive air box and optimize the air flow with excellent heat dissipation and long lasting durability. HPS cold air induction system features HPS signature race proven reinforced silicone hoses and industrial grade 100% stainless steel T-bolt clamps which ensures reliability, even during the most extreme driving conditions. The All-New HPS Performance Air Filters are made in the United State and are designed with performance in mind, delivering excellent filtration without sacrificing air flow. Washable and reusable. NOT CARB Complaint. Vehicle Application: 2006-2011 Honda Civic Si 2.0L. Fine-tuned by HPS to deliver dyno proven performance gains +8.9 Whp horsepower, +7.1 Ft/lbs torque and improve throttle response; Does NOT require tuning after the install. Light weight mandrel-bent aluminum alloy piping replaces the stock restrictive air box and optimize the air flow. Features HPS signature race proven reinforced silicone hoses and industrial grade 100% stainless steel T-bolt clamps. HPS Performance high flow air filter is washable and reusable. The included installation manual has clear pictures and instructions to guide the installer throughout the whole process. Includes HPS silicone coolant re-route hose and air straightener. Attributes: GTIN: 00648044885421 Brand Name: HPS Performance Add-On HPS Filter: HPS-4275 Extended Information: Country of Origin: China Emissions : Electronically Announced Life Cycle Status: Available To Order Packing Information: Quantity of Each: 1 Package UOM: EA Dimension: 12 x 12 x 12 inches Weight: 7 lb

Built for performance and show, the HPS Blue cold air intake kit for 2006-2011 Honda Civic Si 2.0L relocates HPS Performance Air Filter outside of the engine compartment to deliver the coolest air inlet temperatures. Compare to the tradiational shortram air intake, HPS long ram cool air intake delivers cooler air with more oxygen, which translates into a more intense explosion in the vehicle combustion chamber to produce dyno proven performance gains +8.9 Whp horsepower, +7.1 Ft/lbs torque and improve throttle response. The included installation manual has clear pictures and instructions to guide the installer throughout the whole process. HPS silicone coolant re-route hose is included to prevent the intake pipe rubbing the stock coolant hose. The kit also includes air straightener to minimize the chance of CEL lights and the kit does NOT require tuning and no modification is required, however, removal of front bumper is necessary during the installation. HPS light weight mandrel-bent aluminum alloy tube replaces the stock restrictive air box and optimize the air flow with excellent heat dissipation and long lasting durability. HPS cold air induction system features HPS signature race proven reinforced silicone hoses and industrial grade 100% stainless steel T-bolt clamps which ensures reliability, even during the most extreme driving conditions. The All-New HPS Performance Air Filters are made in the United State and are designed with performance in mind, delivering excellent filtration without sacrificing air flow. Washable and reusable. NOT CARB Complaint. Vehicle Application: 2006-2011 Honda Civic Si 2.0L. Fine-tuned by HPS to deliver dyno proven performance gains +8.9 Whp horsepower, +7.1 Ft/lbs torque and improve throttle response; Does NOT require tuning after the install. Light weight mandrel-bent aluminum alloy piping replaces the stock restrictive air box and optimize the air flow. Features HPS signature race proven reinforced silicone hoses and industrial grade 100% stainless steel T-bolt clamps. HPS Performance high flow air filter is washable and reusable. The included installation manual has clear pictures and instructions to guide the installer throughout the whole process. Includes HPS silicone coolant re-route hose and air straightener. Attributes: GTIN: 00648044885438 Brand Name: HPS Performance Add-On HPS Filter: HPS-4275 Extended Information: Country of Origin: China Emissions : Electronically Announced Life Cycle Status: Available To Order Packing Information: Quantity of Each: 1 Package UOM: EA Dimension: 12 x 12 x 12 inches Weight: 7 lb

The All-New HPS Performance 837 Series Cold Air Intake Kit (Black, Part # 837-579WB) for 1998-2002 Honda Accord 2.3L DX EX LX VP SE offers a free-flowing 3 inch mandrel-bent aluminum tube induction system by relocating HPS Performance Air Filter outside of the engine compartment to deliver the coolest air inlet temperature. It can be converted into shortram intake. Compare to the tradiational intake setup, HPS Performance 837 Series cold air intake kit delivers cooler air with more oxygen, which translates into a more intense explosion in the vehicle combustion chamber to increase horsepower, torque and improve throttle response while maintaining safe air fuel ratio. The included installation manual has clear pictures and instructions to guide the installer throughout the whole process. The kit does NOT require tuning and does not trigger CEL light. No modification is required during the installation. HPS light weight mandrel-bent aluminum alloy tube replaces the stock restrictive air box and optimize the air flow with excellent heat dissipation and long lasting durability. HPS Performance 837 Series cold air intake kit features race proven reinforced silicone hoses and industrial grade 100% stainless steel T-bolt clamps which ensures reliability, even during the most extreme driving conditions. The All-New HPS Performance Air Filter is designed with performance in mind, delivering excellent filtration without sacrificing air flow. All HPS Performance Air filter are made in the United States. Fine-tuned by HPS Performance to increase horsepower, torque and improve throttle response. Does NOT require tuning after the install. Light weight 3 inch mandrel-bent aluminum alloy piping replaces the stock restrictive air box and optimize the air flow with excellent heat dissipation and long lasting durability. Features HPS Performance race proven reinforced silicone hoses, industrial grade 100% stainless steel T-bolt clamps and Washable/Reusable Performance Air Filter. Can be converted into shortram intake. The included installation manual has clear pictures and instructions to guide the installer throughout the whole process. Bolt-on easy installation, no modification. Attributes: GTIN: 00648044887975 Brand Name: HPS Performance Add-On HPS Filter: HPS-4275 Extended Information: Country of Origin: China Emissions : Electronically Announced Life Cycle Status: Available To Order Packing Information: Quantity of Each: 1 Package UOM: EA Dimension: 24 x 12 x 10 inches Weight: 5 lb

The All-New HPS Performance 837 Series Cold Air Intake Kit (Red, Part # 837-579R) for 1998-2002 Honda Accord 2.3L DX EX LX VP SE offers a free-flowing 3 inch mandrel-bent aluminum tube induction system by relocating HPS Performance Air Filter outside of the engine compartment to deliver the coolest air inlet temperature. It can be converted into shortram intake. Compare to the tradiational intake setup, HPS Performance 837 Series cold air intake kit delivers cooler air with more oxygen, which translates into a more intense explosion in the vehicle combustion chamber to increase horsepower, torque and improve throttle response while maintaining safe air fuel ratio. The included installation manual has clear pictures and instructions to guide the installer throughout the whole process. The kit does NOT require tuning and does not trigger CEL light. No modification is required during the installation. HPS light weight mandrel-bent aluminum alloy tube replaces the stock restrictive air box and optimize the air flow with excellent heat dissipation and long lasting durability. HPS Performance 837 Series cold air intake kit features race proven reinforced silicone hoses and industrial grade 100% stainless steel T-bolt clamps which ensures reliability, even during the most extreme driving conditions. The All-New HPS Performance Air Filter is designed with performance in mind, delivering excellent filtration without sacrificing air flow. All HPS Performance Air filter are made in the United States. Fine-tuned by HPS Performance to increase horsepower, torque and improve throttle response. Does NOT require tuning after the install. Light weight 3 inch mandrel-bent aluminum alloy piping replaces the stock restrictive air box and optimize the air flow with excellent heat dissipation and long lasting durability. Features HPS Performance race proven reinforced silicone hoses, industrial grade 100% stainless steel T-bolt clamps and Washable/Reusable Performance Air Filter. Can be converted into shortram intake. The included installation manual has clear pictures and instructions to guide the installer throughout the whole process. Bolt-on easy installation, no modification. Attributes: GTIN: 00648044887968 Brand Name: HPS Performance Add-On HPS Filter: HPS-4275 Extended Information: Country of Origin: China Emissions : Electronically Announced Life Cycle Status: Available To Order Packing Information: Quantity of Each: 1 Package UOM: EA Dimension: 24 x 12 x 10 inches Weight: 5 lb

The All-New HPS Performance 837 Series Cold Air Intake Kit (Polish, Part # 837-579P) for 1998-2002 Honda Accord 2.3L DX EX LX VP SE offers a free-flowing 3 inch mandrel-bent aluminum tube induction system by relocating HPS Performance Air Filter outside of the engine compartment to deliver the coolest air inlet temperature. It can be converted into shortram intake. Compare to the tradiational intake setup, HPS Performance 837 Series cold air intake kit delivers cooler air with more oxygen, which translates into a more intense explosion in the vehicle combustion chamber to increase horsepower, torque and improve throttle response while maintaining safe air fuel ratio. The included installation manual has clear pictures and instructions to guide the installer throughout the whole process. The kit does NOT require tuning and does not trigger CEL light. No modification is required during the installation. HPS light weight mandrel-bent aluminum alloy tube replaces the stock restrictive air box and optimize the air flow with excellent heat dissipation and long lasting durability. HPS Performance 837 Series cold air intake kit features race proven reinforced silicone hoses and industrial grade 100% stainless steel T-bolt clamps which ensures reliability, even during the most extreme driving conditions. The All-New HPS Performance Air Filter is designed with performance in mind, delivering excellent filtration without sacrificing air flow. All HPS Performance Air filter are made in the United States. Fine-tuned by HPS Performance to increase horsepower, torque and improve throttle response. Does NOT require tuning after the install. Light weight 3 inch mandrel-bent aluminum alloy piping replaces the stock restrictive air box and optimize the air flow with excellent heat dissipation and long lasting durability. Features HPS Performance race proven reinforced silicone hoses, industrial grade 100% stainless steel T-bolt clamps and Washable/Reusable Performance Air Filter. Can be converted into shortram intake. The included installation manual has clear pictures and instructions to guide the installer throughout the whole process. Bolt-on easy installation, no modification. Attributes: GTIN: 00648044887951 Brand Name: HPS Performance Add-On HPS Filter: HPS-4275 Extended Information: Country of Origin: China Emissions : Electronically Announced Life Cycle Status: Available To Order Packing Information: Quantity of Each: 1 Package UOM: EA Dimension: 24 x 12 x 10 inches Weight: 5 lb

The All-New HPS Performance 837 Series Cold Air Intake Kit (Black, Part # 837-576WB) for 2013-2014 Dodge Dart 1.4L Turbo offers a free-flowing 3 inch mandrel-bent aluminum tube induction system by relocating HPS Performance Air Filter outside of the engine compartment to deliver the coolest air inlet temperature. Compare to the tradiational intake setup, HPS Performance 837 Series cold air intake kit delivers cooler air with more oxygen, which translates into a more intense explosion in the vehicle combustion chamber to produce dyno proven performance gains - increase horsepower +8.4 whp , torque +10.8 ft/lbs and improve throttle response while maintaining safe air fuel ratio. The included installation manual has clear pictures and instructions to guide the installer throughout the whole process. The kit does NOT require tuning and does not trigger CEL light. No modification is required during the installation. HPS light weight mandrel-bent aluminum alloy tube replaces the stock restrictive air box and optimize the air flow with excellent heat dissipation and long lasting durability. HPS Performance 837 Series cold air intake kit features race proven reinforced silicone hoses and industrial grade 100% stainless steel T-bolt clamps which ensures reliability, even during the most extreme driving conditions. The All-New HPS Performance Air Filter is designed with performance in mind, delivering excellent filtration without sacrificing air flow. All HPS Performance Air Filter are made in the United States. Fine-tuned by HPS Performance to produce dyno proven performance gains - increase horsepower +8.4 whp , torque +10.8 ft/lbs and improve throttle response. Does NOT require tuning after the install. Light weight 3 inch mandrel-bent aluminum alloy piping replaces the stock restrictive air box and optimize the air flow with excellent heat dissipation and long lasting durability. Features HPS Performance race proven reinforced silicone hoses, industrial grade 100% stainless steel T-bolt clamps and Washable/Reusable Performance Air Filter. The included installation manual has clear pictures and instructions to guide the installer throughout the whole process. Bolt-on easy installation, no modification. Attributes: GTIN: 00648044887937 Brand Name: HPS Performance Add-On HPS Filter: HPS-4275 Extended Information: Country of Origin: China Emissions : Electronically Announced Life Cycle Status: Available To Order Packing Information: Quantity of Each: 1 Package UOM: EA Dimension: 24 x 12 x 10 inches Weight: 5 lb