Experience a noticeable boost in horsepower, quicker throttle response, and an enhanced engine sound with this performance intake kit designed exclusively for the Ford Crown Victoria V8-4.6L engine. Engineered to replace the restrictive factory air intake, this cold air intake system takes your vehicle’s performance from daily driving to high-performance runs.Key Benefits• Enhanced Airflow: The high-density polyethylene (HDPE) tube maximizes intake volume for increased power and torque.• Washable, Reusable Filter: Equipped with a high-flow, oiled cotton media that lasts up to 100,000 miles under normal highway conditions.• Custom Heat Shield: Shields intake air from the high temperatures of the engine bay, ensuring consistent performance.• Quick and Easy Installation: Typically installs in under 60 minutes, so you can get back on the road swiftly.This system’s advanced design delivers measurable power gains by efficiently channeling cooler, denser air into your engine, letting it breathe easier and run smoother. Its oversized, conical design not only extends service intervals but also contributes to long-term vehicle health and reliability. Enjoy the advantage of a design that comes with a warranty similar to the “K&N No-Hassle Lifetime Limited Warranty,” underscoring its quality and durability.Important NoteSome intakes may not be legal for sale or use on any pollution-controlled motor vehicle in California. Please refer to the product specifications for CARB status on each part.For detailed installation instructions, please refer to Installation Instructions.Below is a summary of vehicle compatibility: Year Make Model Submodel 1999-2002 Ford Crown Victoria Base 2002 Ford Crown Victoria LWB 1999-2002 Ford Crown Victoria LX 1999-2002 Ford Crown Victoria Police Interceptor 1999-2002 Ford Crown Victoria S Explore our Air Intake Systems collection for more performance-enhancing solutions and upgrade your driving experience today.

Experience an immediate boost in your engine’s performance with this high-density polyethylene (HDPE) rotationally molded intake kit. Designed to improve airflow, it guarantees an increase in horsepower and torque, ensuring your Ford F-150, Expedition, and Lincoln Navigator V8 perform at their best. Enjoy enhanced engine breathing and long-lasting durability, all while reducing the need for frequent maintenance.Key Features• Built with a durable HDPE tube that maximizes airflow• Washable, reusable high-flow air filter featuring oiled cotton media• Oversized, conical design allowing for up to 100,000 miles between filter services• Custom heat shield designed to keep intake air cool even under high engine bay temperatures• Quick and easy installation—typically completed in less than 60 minutes• Note: CARB compliance details are available in the product specificationsPerformance and Technical BenefitsThis performance intake system is engineered to deliver measurable improvements, boosting horsepower and torque for an exhilarating driving experience. By optimizing airflow, it not only enhances engine efficiency but also sustains performance over long distances. Ideal for enthusiasts seeking a reliable upgrade, it stands alongside high-end solutions like the K&N performance intake kit, ensuring quality without compromise.Easy Installation and WarrantyDesigned for a worry-free upgrade, the kit requires only basic tools and minimal installation time. Every unit reflects our commitment to quality and performance, providing lasting value every mile.Compatible with select Ford and Lincoln models, including various trims of the F-150 and Expedition. Discover more performance-enhancing products in our Air Intake Systems and Ford F-150 1997-2003 Parts collections for a complete upgrade experience.

Experience a noticeable boost in your engine’s breathing with the K&N 98-01 Ford Ranger / Mazda B2500 L4-2.5L Performance Intake Kit. Designed for both Ford Ranger and Mazda B2500 enthusiasts, this kit is engineered to optimize airflow, improve throttle response, and deliver guaranteed gains in horsepower and torque. It’s the perfect upgrade for anyone looking to enhance their vehicle’s performance with proven, efficient components.What Makes It Stand Out• High-density polyethylene (HDPE) rotationally-molded tube engineered to maximize airflow• Washable, reusable High-Flow Air Filter featuring premium oiled cotton media• Custom heat shield designed to keep intake air cooler despite high engine bay temperatures• Extended service interval providing up to 100,000 miles between filter maintenance under normal highway conditionsFitment, Compliance & WarrantyThis Performance Intake Kit is specifically designed for Ford Ranger models (Splash, XL, XLT from 1998 to 2001) and Mazda B2500 variants (including SE, SX, and the Troy Lee edition). Please note that some versions of these intakes may not be legal for sale or use on emission-controlled vehicles in California. Always check the CARB status in the detailed product specifications for your specific vehicle. Enjoy peace of mind with our comprehensive warranty and 24/7 customer support.Upgrade your truck’s intake system today for a smoother, more powerful performance. For more performance solutions, visit our Air Intake Systems collection.

Enhance your ride with a high-performance intake kit designed for the 2002-2003 Ford Explorer and Mercury Mountaineer. This system features an HDPE, rotationally molded tube and a washable, high-flow air filter with oiled cotton media, engineered to boost horsepower and torque while optimizing engine efficiency.Key Benefits Guaranteed increase in horsepower and torque Extended service life up to 100,000 miles under normal highway conditions Easy DIY installation in less than 60 minutes Custom heat shield to protect intake air from high engine bay temperatures Durable HDPE construction for lasting performance Performance Specs Estimated Horsepower Gain: Approximately 13.55 HP Estimated Torque Gain: Around 10 lb-ft Advanced design for improved engine responsiveness Important InformationSome intakes may not be legal for sale or use on pollution-controlled vehicles in California. Please check the CARB status in the product specifications for your specific vehicle.Fits For 2002-2003 Ford Explorer (Eddie Bauer, Limited, and XLT trims) 2002-2003 Mercury Mountaineer (Base) Explore our full range of solutions in our Air Intake Systems collection and experience the difference with Everything Truck Parts.

Experience the ultimate performance boost with the K&N 03-04 Ford Expedition Performance Intake Kit. Designed to improve airflow and enhance engine power, this Ford Expedition performance intake system is a top choice for enthusiasts looking to upgrade their V8 engines with high-quality components. Its innovative design ensures your vehicle delivers improved throttle response and increased horsepower, making it a must-have for those who demand both quality and efficiency.Key Features High-density HDPE rotationally molded tube that maximizes airflow Washable, reusable high-flow air filter with oiled cotton media for enhanced performance Oversized conical design allowing up to 100,000 miles between filter services under normal highway conditions Custom heat shield that protects intake air from engine bay heat Easy installation process taking less than 60 minutes for a quick upgrade Estimated performance gain of up to 10-15 HP* when paired with the proper components Technical Specifications & Fitment Material: Durable high-density polyethylene (HDPE) Fitment: Specifically engineered for 2003-2004 Ford Expedition models including Eddie Bauer, NBX, XLS, XLT, and XLT Sport Legal Note: Some intakes may not be legal for sale or use on any pollution-controlled motor vehicle in California. Refer to product specifications for CARB compliance details. For detailed guidance, please use the following resources: Installation Instructions – Download PDF User Manual – Download PDF Explore more performance parts in our Cold Air Intakes collection to complete your upgrade.*Actual performance gains may vary based on application and vehicle setup.

Experience a noticeable boost in horsepower, torque, and throttle response with this high-performance intake kit specially engineered for the 2002–2003 Ford Explorer and Mercury Mountaineer V6-4.0L. Its innovative design not only enhances engine sound but also maximizes airflow, giving your vehicle the competitive edge it deserves.Key Benefits Constructed from a high-density polyethylene (HDPE) rotationally molded tube that significantly enhances engine airflow. Features a washable, reusable high-flow air filter with oiled cotton media for lasting performance. Oversized, conical design supports service intervals of up to 100,000 miles under highway conditions. Custom heat shield protects intake air from high engine bay temperatures. Fast and straightforward installation, typically completed in less than 60 minutes. Market-leading options like the “K&N intake kit Ford Explorer” and a reliable “performance intake for Mercury Mountaineer” elevate your driving experience. Installation & ComplianceFor detailed installation instructions, please refer to the provided guidelines. Be sure to review the linked PDFs for complete installation procedures and compliance notes. Some intakes may not be legal for sale or use on any pollution-controlled vehicle in California. For more premium parts, explore our Air Intake Systems.Fitment Details Year Make Model Submodel 2002-2003 Ford Explorer Eddie Bauer 2002-2003 Ford Explorer Limited 2002-2003 Ford Explorer Postal 2002-2003 Ford Explorer XLS 2002-2003 Ford Explorer XLT 2002-2003 Mercury Mountaineer Base Warranty & Quality AssuranceDrive with confidence knowing that this kit comes with a K&N No-Hassle Lifetime Limited Warranty and is crafted with precision-engineered components for enduring performance and reliability.

This performance intake kit is engineered specifically for 1995–1997 Ford Explorer V6 4.0 OHV models, designed to boost horsepower and torque while enhancing overall engine efficiency. The K&N intake kit for the Ford Explorer is crafted with a high-density polyethylene (HDPE) rotationally-molded tube to increase airflow and deliver an estimated gain of around 15 HP, helping you achieve a noticeable performance upgrade on your Ford Explorer.Key Features Optimized Airflow: The HDPE tube efficiently increases airflow to maximize engine performance. High-Flow Air Filter: Reusable filter featuring oiled cotton media that can last up to 100,000 miles under normal driving conditions. Custom Heat Shield: Protects intake air from the high temperatures in the engine bay. Quick Installation: Designed for a hassle-free installation process, typically completed in less than 60 minutes with common hand tools. Performance Upgrade: A proven performance intake kit for Ford Explorer enthusiasts seeking reliable enhancements. Installation & WarrantyEnjoy peace of mind with our No-Hassle Lifetime Limited Warranty and detailed installation instructions provided for your convenience. For additional performance upgrades, explore our Air Intake Systems collection.Fitment Details:This part fits the following Ford Explorer variations: Year Make Model Submodel 1995–1997 Ford Explorer Eddie Bauer 1995 Ford Explorer Expedition 1995–1997 Ford Explorer Limited 1995–1997 Ford Explorer Sport 1995–1997 Ford Explorer XL 1995–1997 Ford Explorer XLT Please note: Some intakes are not legal for sale or use on pollution-controlled vehicles in California. Refer to product specifications for CARB status.

Upgrade your engine’s performance with the ultimate K&N 95-97 Ford Ranger performance intake kit and Mazda B2300 2.3L performance intake. This precision-engineered air intake system features a high-density polyethylene (HDPE) rotationally-molded tube designed to boost airflow and deliver increased horsepower and torque, making it an excellent choice for Jeep, truck, and 4WD enthusiasts.Key Benefits• Enhanced airflow with a robust HDPE tube for improved engine efficiency• Washable, reusable high-flow air filter with oiled cotton media that supports up to 100,000 miles between services• Custom heat shield design to help reduce engine bay heat intake• Simple installation process that typically takes less than 60 minutes• CARB compliance may vary—please verify specific vehicle eligibility in the product specificationsInstallation & MaintenanceInstalling the kit is straightforward, ensuring you can quickly enjoy the benefits for your engine’s performance. For detailed guidance, review the installation instructions provided on our website. With minimal regular maintenance, the filter is designed to maintain peak performance over extended highway use.Explore more innovative air intake systems in our Air Intake Systems collection and experience the difference quality parts can make.This Part Fits: Year Make Model Submodel 1995-1997 Ford Ranger Splash 1997 Ford Ranger Sport 1995-1997 Ford Ranger STX 1995-1997 Ford Ranger XL 1995 Ford Ranger XL Sport 1995-1997 Ford Ranger XLT 1995-1997 Mazda B2300 Base 1995-1997 Mazda B2300 SE

Experience enhanced engine performance with improved airflow that increases horsepower and torque. This Ford Mustang V6 performance intake kit, frequently praised in K&N Mustang intake kit reviews, is precisely engineered to deliver dependable results while maximizing your engine’s potential.Key Benefits High-density polyethylene (HDPE) rotationally molded tube for optimal airflow. Washable, reusable high-flow air filter featuring oiled cotton media. Extended filter service life of up to 100,000 miles under normal highway conditions. Custom heat shield designed to protect intake air from high engine bay temperatures. Quick installation in under 60 minutes for added convenience. This intake kit is built with premium materials and expert craftsmanship to ensure long-lasting performance. Please note: This kit is not legal for use on pollution-controlled vehicles in certain states, including California. Review CARB status in the product specifications for your particular vehicle. For additional performance solutions, explore our Air Intake Systems collection.This Part Fits: Year Make Model Submodel 1999-2004 Ford Mustang Base For further guidance, please refer to the Detailed Installation Guide and consult the User Manual.

Experience a real performance boost with this HDPE intake system engineered for the 1994‑1997 Ford F-Series Super Duty V8‑7.3L engine. Enjoy a guaranteed increase in horsepower and torque as improved airflow enhances your engine’s breathing, giving you extra confidence on and off the road.Key Features• Increased airflow provided by a high-density polyethylene rotationally-molded tube for optimal engine performance.• Washable, reusable high-flow air filter featuring oiled cotton media with service intervals up to 100,000 miles.• Custom-designed heat shield that safeguards intake air from high engine bay temperatures.• Simple installation process typically under 60 minutes, allowing a quick upgrade with minimal tools.Installation & Maintenance• Quick install: Most users complete the setup in less than an hour, making it a hassle-free upgrade.• Long-life filter: Engineered to last up to 100,000 miles under normal highway conditions before service is needed.• Detailed support: See the provided installation instructions for a step-by-step guide.Compatibility Year Make Model Submodel 1997 Ford F-250 Base 1995-1996 Ford F-250 Eddie Bauer 1997 Ford F-250 Lariat 1995-1996 Ford F-250 Special 1994-1997 Ford F-250 XL 1994-1997 Ford F-250 XLT 1997 Ford F-250 HD XL 1997 Ford F-250 HD XLT 1997 Ford F-350 Base 1995 Ford F-350 Eddie Bauer 1995-1996 Ford F-350 Special 1994-1997 Ford F-350 XL 1994-1997 Ford F-350 XLT Please verify CARB compliance for your specific vehicle, as some intakes may not be legal for sale or use on pollution-controlled vehicles in California.For additional performance upgrades, explore our Air Intake Systems collection.

Experience a noticeable boost in engine performance with the K&N 99-03 Ford F-Series Super Duty V8-7.3L Performance Intake Kit. Designed to increase horsepower and torque, this precision-engineered system is perfect for truck enthusiasts looking to upgrade their vehicle's air intake efficiency.Key Benefits• Guaranteed increase in horsepower and torque, delivering enhanced performance• Durable high-density polyethylene rotationally molded tube for superior airflow• Washable, reusable high-flow air filter with oiled cotton media, offering up to 100,000 miles of service• Custom heat shield that helps maintain cool intake air in a high-temperature engine bay• Quick and simple installation – usually completed in under 60 minutesTechnical & Legal DetailsConstructed with premium materials and engineered for optimal performance, this intake kit is a standout upgrade. Please note that while most models are compatible with a range of vehicles, some intakes may not be legal for use on pollution-controlled motor vehicles in California. Always refer to the product specifications for CARB status on each part to ensure compliance.Fitment InformationThis kit is designed for select Ford models including the Excursion, F-Series Super Duty, and more. Detailed compatibility information is available through the fitment table below.For additional performance upgrades and a wider selection of air intake systems, explore our Air Intake Systems collection.

Experience a performance boost with our K&N performance intake kit engineered for the Ford Explorer V6-4.0L SOHC engine. This kit is designed to increase horsepower and torque by optimizing airflow, allowing you to enjoy improved engine response and efficiency.Key Features• Built with a high-density polyethylene (HDPE) mandrel-bent tube to enhance engine performance.• Includes a washable, reusable high-flow air filter with premium oiled cotton media.• Features an oversized, conical filter design that supports service intervals of up to 100,000 miles under normal highway conditions.• Custom heat shield protects intake air from engine bay heat, ensuring optimal performance.• Quick and easy installation—usually completed in under 60 minutes.Specifications• Estimated Performance: Internal testing shows noticeable gains in horsepower and torque.• Materials: HDPE intake tube paired with oiled cotton filter media for consistent airflow.• Warranty: Enjoy peace of mind with our No-Hassle Lifetime Limited Warranty.• Compliance: Some intakes may not be legal for sale or use on pollution-controlled vehicles in California; refer to CARB status for your specific application.This performance intake kit is precisely engineered for various Ford Explorer models. For more innovative air intake solutions, check out our collection on Air Intake Systems. Always verify fitment and legal compliance before purchase.

Experience a tangible improvement in your Ford Explorer V6-4.0L’s performance with our high-density polyethylene (HDPE) intake system. Designed to enhance airflow, this finely engineered kit boosts horsepower and torque while shielding your engine bay from heat. It’s perfect for enthusiasts seeking a balance between performance upgrades, durability, and ease of installation.Key Benefits• HDPE rotationally-molded tube enhances airflow, contributing to horsepower and torque gains (comparable to 13–16 HP and 10–19 lb-ft, depending on vehicle conditions).• Washable, reusable high-flow air filter featuring oiled cotton media for consistent performance.• Custom heat shield protects intake air from high engine bay temperatures.• Straightforward installation—typically completed in less than 60 minutes using standard hand tools.• Extended filter lifespan, delivering up to 100,000 miles between services under normal highway conditions.Installation & PerformanceThis performance intake kit not only provides noticeable improvements in airflow and engine responsiveness, but also ensures a hassle-free installation. With clear instructions and an intuitive design, you can upgrade your vehicle quickly without needing extensive mechanical experience. Please note that while the kit is legal for street use in most states, it may not be approved for sale or use on vehicles equipped with pollution controls in California. Always refer to the CARB status for your specific vehicle.For more performance upgrades, check out our Air Intake Systems collection.Below is the detailed vehicle fit information: Year Make Model Submodel 1997-2000 Ford Explorer Eddie Bauer 1997-2000 Ford Explorer Limited 2000 Ford Explorer Postal 1997-2000 Ford Explorer Sport 1997-1999 Ford Explorer XL 2000 Ford Explorer XL Fleet 1999-2000 Ford Explorer XLS 1997-2000 Ford Explorer XLT 2001 Ford Explorer Sport Trac Base

Experience a significant boost in performance with this precision-engineered intake kit, designed exclusively for the Ford Ranger V6 4.0L. Enjoy increased horsepower, improved throttle response, and an enhanced engine sound—all while delivering the durability and quality you expect. Whether you’re looking for “how to install K&N intake on Ford Ranger” or a “Ford Ranger V6 4.0L intake kit for sale,” this product is your key to unlocking your Ranger’s true potential.Key Features & Benefits• A high-density polyethylene rotationally molded tube maximizes airflow, delivering more power and torque.• The washable, high-flow air filter with oiled cotton media maintains performance with up to 100,000 miles between services.• A custom heat shield protects your intake air from high engine bay temperatures.• A quick installation in less than 60 minutes gets you back on the road faster.• Complies with CARB/California emissions standards—review specifications for legal compliance.Installation & SupportFollow our detailed installation guide for step-by-step instructions—download our Installation Instructions to assist you along the way. If you need further clarification on installation or warranty details, our customer service is available 24/7 to help you maintain peak performance.Discover even more performance upgrades in our Air Intake Systems collection.

The K&N 99-04 Ford F-Series Super Duty V8-5.4L Performance Intake Kit is engineered to enhance your engine’s performance with a top-quality design. Made from high-density polyethylene (HDPE) and featuring a washable, reusable high-flow air filter with oiled cotton media, this kit is designed to boost horsepower, torque, and throttle response while maintaining optimal engine efficiency.Key Benefits• Guaranteed increase in horsepower and torque• Enhanced throttle response and overall engine performance• Durable HDPE construction paired with a custom heat shield for ideal temperature management• Washable, reusable high-flow air filter with oiled cotton media• Oversized conical design rated for up to 100,000 miles of service• Installation typically takes under 60 minutesVehicle Compatibility• Fits Ford Excursion, F-250, and F-350 Super Duty models from 1999 to 2004• Compatible with various trims including Eddie Bauer, Limited, XLS, XLT, Base, Lariat, XL, and King RanchInstallation & UsageInstallation is straightforward and designed for quick upgrades. Please see the detailed Installation Instructions for a step-by-step guide. Additional resources are available to help with your installation process.Legal NoticeThis intake kit might not be legal for use on pollution-controlled vehicles in California. Please review the CARB compliance information specific to your vehicle to ensure legal use.Discover more performance-enhancing options in our Air Intake Systems and Cold Air Intakes collections.

Engineered to boost your Ford F-Series Super Duty V10-6.8L’s performance, this high-performance intake kit increases airflow and improves engine output. Featuring a durable HDPE rotationally-molded tube and a washable, high-flow air filter with oiled cotton media, this kit enhances horsepower and torque while keeping your engine cool with a custom-designed heat shield. Benefit from extended maintenance intervals of up to 100,000 miles between filter services and a quick installation that takes less than 60 minutes, making it perfect for both enthusiasts and professional drivers.Key Features Increased horsepower and torque for optimal performance Extended filter service intervals of up to 100,000 miles Precision-engineered HDPE tube with a washable high-flow filter design Custom heat shield for efficient management of intake air temperature Quick installation in under 60 minutes using standard tools CARB compliance details available—please check specifications for legal use Installation & FitmentFor detailed instructions, refer to our Installation Instructions. This intake kit is specifically engineered for Ford F-Series Super Duty models, including the F-250, F-350, F-450, and more. Supported by our commitment to quality and the K&N No-Hassle Lifetime Limited Warranty, this performance upgrade is a dependable choice for truck enthusiasts. Discover more performance parts in our Air Intake Systems collection.

Experience a noticeable performance boost with the K&N Mustang Cobra Performance Intake Kit. Designed specifically for select Ford Mustangs, including the 2001 GT Bullitt and SVT Cobra models, this advanced FIPK system replaces the restrictive factory air filter and housing. By streamlining airflow and reducing intake restriction, it helps you maximize engine power and acceleration. Purchase the K&N Mustang intake today and experience the improved throttle response and overall performance.Key Features & Benefits• Optimized airflow to significantly enhance horsepower and torque• Improved throttle response across the entire RPM range• Quick and simple installation—typically completed in 90 minutes or less using factory mounting points• Chrome-topped high-flow, washable air filter designed for up to 100,000 miles• Complete with a heat shield and engineered intake tube for effective air delivery• Backed by K&N’s Million Mile Limited Warranty and street legal in all 50 US statesTechnical Specifications• Part Number: K&N 57-2523-2 FIPK• Filter Life: Up to 100,000 miles (depending on driving conditions)• Installation: Accommodates the factory mass air sensor with standard tools required Year Make Model Submodel 2001 Ford Mustang GT Bullitt 1996-1999, 2001 Ford Mustang SVT Cobra Installation is straightforward and reliable, ensuring you spend less time in the garage and more time on the road. Enhance your Mustang's performance today with this proven, legal, and high-quality intake system. For more performance-enhancing solutions, check out our Air Intake Systems.Additional Resources:• Installation Instructions• User Manual

This high-performance intake kit is engineered specifically for the 1996–2004 Mustang GT V8 4.6L SOHC. Developed as a K&N Mustang GT performance intake kit and a Mustang GT 4.6L intake upgrade, it fuses innovative design with premium materials to enhance your engine’s airflow, horsepower, and torque.Key Benefits & Features• Increased airflow for improved horsepower and torque• Enhanced throttle response and a more aggressive engine sound• Durable, high-density polyethylene (HDPE) intake tube• Washable, reusable high-flow air filter featuring oiled cotton media that lasts up to 100,000 miles• Custom-designed heat shield to guard against high engine bay temperatures• Supported by a trusted K&N warranty for long-term performanceInstallation, Legal & Compatibility InformationInstallation is straightforward and can typically be completed in under 60 minutes. Please note, this intake kit is not legal for sale or use on pollution-controlled vehicles in California. Refer to the installation instructions for detailed setup and maintenance guidelines.• Compatible with 1996–2004 Ford Mustang GT models• For additional details on installation and care, visit the Air Intake Systems collection.

Experience a breakthrough in engine performance with the K&N 97-02 Ford F Series V8 Performance Intake Kit. Designed to replace your restrictive OEM air box, this system delivers increased horsepower, enhanced throttle response, and improved towing performance—all built on proven engineering and quality materials.OverviewCreated specifically for Ford F Series V8/4.6L/5.4L engines, this intake kit optimizes airflow with a durable HDPE rotationally molded tube and a high-flow, washable air filter. Enjoy a noticeable boost in both power and efficiency with every drive.Key Features Greater engine airflow for improved horsepower and torque Washable, reusable high-flow air filter with oiled cotton media Custom heat shield to deflect excess engine bay heat Oversized, conical filter design that extends service intervals up to 100,000 miles Quick installation, typically completed in under 60 minutes Technical DetailsThis advanced system uses a robust HDPE tube designed to enhance performance by replacing the OEM airbox. Its unique design ensures optimal airflow under normal highway conditions. Note: Some intakes may not be legal for sale or use on pollution-controlled vehicles in California. Please verify the CARB status in the product specifications for your specific vehicle.Fitment InformationThis kit fits a variety of Ford models, including the 1997-2002 Expedition (Eddie Bauer and XLT) and multiple F-Series trims. For more options and detailed product selections, visit our Air Intake Systems collection.Supplemental Information: Installation Instructions | User Manual

Experience a dramatic enhancement in performance with the K&N Mustang V8 performance intake kit. This Ford Mustang 5.0L intake kit replaces your factory air intake system, substantially increasing airflow, horsepower, and throttle response. Designed specifically for classic Mustangs, it delivers improved acceleration and dependable performance on the road.Key Features Enhanced engine power and better throttle response across the RPM range High-flow, washable K&N air filter that lasts up to 100,000 miles Engineered to swap out restrictive factory air intake systems Quick and easy installation in about 90 minutes using your car's existing mounts Designed for 1994-1995 Ford Mustang GT, GTS, and SVT Cobra models Backed by K&N’s Million Mile Limited Warranty Installation InstructionsInstallation is simple with clear, downloadable instructions included in your kit. Just follow the step-by-step guide (with detailed PDFs) and use standard tools available in most workshops. The kit is engineered to optimize airflow by channeling air through a high-performance filter directly into your engine.Compatibility & Legal Information Fits 1994-1995 Ford Mustang GT, GTS, and SVT Cobra models Street legal in all 50 U.S. states and compliant with emission standards For additional performance upgrades, visit our Air Intake Systems collection.

Experience a surge in performance with the K&N 88-95 Ford PickUp/Bronco Performance Intake Kit. Designed specifically for 1988‑1995 Ford Pickups and Broncos, this kit improves your vehicle’s breathing by replacing restrictive factory components with a design that boosts both horsepower and torque, delivering a noticeable improvement in throttle response.Key Benefits• Guaranteed increase in horsepower and torque by reducing factory intake restrictions• Optimized airflow through dual intake tubes for enhanced performance across the entire RPM range• Washable, reusable high-flow air filter with oil-treated media for consistent performance• Easy installation in approximately 60 minutes using common tools• Includes a vent hose and all necessary clamps, along with a No-Hassle Lifetime Limited Warranty ensuring street legality in all 50 US statesEasy Installation & CompatibilityThe kit is designed for a straightforward installation that fits directly into your vehicle’s original airbox area. Every component is precision-engineered to work seamlessly, ensuring your engine takes in more air for maximum efficiency. Ideal for 1988‑1995 Ford Bronco variants (including Custom, Eddie Bauer, XL, XLT, and more) and Ford PickUp models, this performance upgrade delivers reliability and durability mile after mile.Discover more high-quality air intake solutions in our Air Intake Systems collection and experience the K&N Engineering difference.

Experience a significant boost in performance with the K&N Jeep Wrangler performance intake kit created specifically for Jeep Wrangler JL 2.0L turbo engines. This system is engineered to optimize airflow, increase horsepower and torque, and make maintenance effortless for every Jeep enthusiast.Key Benefits• Enclosed air box design protects the filter and inlet air from engine bay heat.• High-density polyethylene (HDPE) rotationally molded tube maximizes airflow, delivering proven performance gains.• High-flow, washable air filter with oiled cotton media maintains consistent performance for up to 100,000 miles between services.• Tool-free air box lid access simplifies routine maintenance.Easy Installation & Support• Install in less than 60 minutes with common tools.• Enjoy quick setup and reliable performance backed by our quality guarantee.• For detailed instructions, please download the full installation guide.Not legal for sale or use in California on pollution-controlled vehicles – see CARB status for specific vehicle details. For more performance upgrades like this, check out our Air Intake Systems collection.

This Jeep Grand Cherokee 3.6L V6 performance intake kit is engineered to boost horsepower and torque, delivering a noticeable improvement in throttle response. Designed for enthusiasts seeking a K&N Jeep Grand Cherokee intake, the kit features an enclosed air box that protects the filter from engine heat, ensuring reliable performance even under demanding conditions. The advanced design integrates an HDPE rotationally molded tube for increased airflow along with a washable, reusable high-flow air filter with oiled cotton media—capable of lasting up to 100,000 miles under normal highway conditions.Key Features• Enclosed air box design to shield the filter from engine heat• HDPE rotationally molded tube that optimizes airflow to guarantee a boost in horsepower and torque• High-flow, washable filter offering extended service intervals• Tool-free access through the air box lid for quick maintenance• CARB compliance details provided; check product specifics for regional requirementsInstallation Guide• Typically installed in less than 60 minutes using simple hand tools• Recommended tools: Wrench set Screwdriver Pliers Fitment & Legal NoticeThis intake kit is specifically designed for the Jeep Grand Cherokee 3.6L V6. Please note that some models may not be legal for sale or operation in California due to emission regulations. For more options, explore our Air Intake Systems collection.

Enhance your engine's performance with the K&N Performance Intake Kit for Chrysler 200, engineered specifically for 2015–2016 Chrysler 200 models equipped with a 3.6L V6 engine. This kit maximizes airflow, boosting horsepower, torque, and throttle response while delivering improved engine acoustics and overall reliability.Key Benefits & Features Enhanced airflow for increased horsepower and torque HDPE rotationally molded tube paired with a washable, reusable high-flow air filter featuring oiled cotton media – remains effective for up to 100,000 miles under highway conditions Custom heat shield designed to keep intake air cool by shielding it from excessive engine bay heat Upgraded engine sound that delivers a more aggressive, performance-focused tone Straightforward installation process, typically completed in less than 90 minutes Installation & Compatibility Easy-to-follow installation instructions: Installation Instructions Detailed technical drawings available here: Technical Drawing Designed for 2015–2016 Chrysler 200 models, including C, Limited, and S trims Important NoteSome intake systems may not be compliant with California emissions standards. Please review the CARB status in the product specifications to ensure compliance before installation.For additional performance parts, browse our Air Intake Systems collection.

Upgrade your truck’s performance with the K&N 15-16 Dodge Ram 1500 V6-3.0L DSL Performance Intake Kit. Engineered to deliver a noticeable boost in horsepower and torque, this K&N Dodge Ram 1500 intake kit is designed exclusively for Dodge Ram 1500 vehicles equipped with a 3.0L V6 engine. Its innovative components optimize airflow for improved engine efficiency and performance.Key Benefits• Utilizes a high-density polyethylene (HDPE) rotationally molded tube to enhance airflow• Features a washable, reusable high-flow air filter with premium oiled cotton media• Designed with an oversized, conical filter element that provides up to 100,000 miles between services• Includes a custom heat shield to protect intake air from the high temperatures found in the engine bay• Offers a simple, do-it-yourself installation that typically takes less than 90 minutes• Built to last, ensuring reliable performance for both casual enthusiasts and professionalsInstallation & Important DetailsThe installation is straightforward and can be completed using basic hand tools. Always review the CARB status provided in the installation instructions, as some intakes may not be legal on pollution-controlled vehicles in certain states, such as California. For additional support and guidance, refer to the installation instructions and technical drawings that accompany the product.For more performance upgrade options, check out our Air Intake Systems collection.Fitment Information Year Make Model Submodel 2014-2018 Ram 1500 Big Horn 2016-2018 Ram 1500 HFE 2014-2018 Ram 1500 Laramie 2014-2015 Ram 1500 Laramie Limited 2014-2018 Ram 1500 Laramie Longhorn 2015-2018 Ram 1500 Limited 2014-2018 Ram 1500 Lone Star 2014-2016 Ram 1500 Outdoorsman 2014-2018 Ram 1500 SLT 2018 Ram 1500 Sport 2014-2018 Ram 1500 Tradesman 2019 Ram 1500 Classic Laramie 2019 Ram 1500 Classic SLT 2019 Ram 1500 Classic Tradesman

Upgrade your engine’s performance with an HDPE rotationally molded air intake system engineered to deliver a noticeable increase in horsepower and torque. Featuring a washable, reusable high-flow air filter and a custom heat shield, this intake system improves airflow efficiency and is built to last—up to 100,000 miles between cleanings under normal highway conditions. An ideal choice for enthusiasts seeking a K&N 14-16 Jeep Cherokee intake or a Jeep Cherokee V6 performance intake upgrade. HDPE rotationally molded tube enhances engine airflow for better performance Washable, reusable high-flow air filter with premium oiled cotton media Noticeable boost in horsepower and torque for an exhilarating driving experience Custom heat shield shields intake air from engine bay heat Quick installation in under 60 minutes using basic hand tools Perfect for upgrades such as the K&N performance intake for Jeep Cherokee and the 3.2L V6 Jeep Cherokee intake Installation & SpecsInstallation is simple with clear instructions provided, so you can quickly enjoy this performance upgrade. The conical design maximizes airflow, and the durable construction is engineered to last. Always check product specifications for CARB status if your vehicle is sold in California to ensure compliance.Enhance your ride with a system built for durability and genuine performance gains. This part fits select Jeep Cherokee models—from the 75th Anniversary edition to Latitude, Limited, Overland, Sport, and Trailhawk. For additional premium air intake options, visit our Air Intake Systems collection or browse our range of Jeep Cherokee 2014-2023 Parts. Upgrade your Jeep engine performance today!

Upgrade your Jeep Patriot’s performance with our premium K&N Jeep Patriot intake system. Designed to deliver proven horsepower gains and increased torque, this performance intake is engineered with advanced features, including an HDPE rotationally molded tube and a washable, high-flow air filter with oiled cotton media. Enjoy better airflow, reliability, and ease of installation—perfect for automotive enthusiasts and professional drivers alike.Key Benefits Increased airflow that boosts horsepower and torque for a noticeable performance improvement Extended service intervals – up to 100,000 miles under normal highway conditions Quick installation in under 60 minutes, saving you valuable time Custom heat shield that protects intake air from high engine bay temperatures Meets CARB and California emission standards – please check individual CARB status Product EngineeringThis intake system is precision engineered with a high-density polyethylene tube created through rotational molding. The oversized, conical high-flow filter employs durable oiled cotton media to ensure consistent performance even over extended service intervals. Its design is optimized to channel cool, fresh air to your engine, delivering improved horsepower and torque while ensuring long-term reliability.Fitment Details Year Make Model Submodel 2016 Jeep Compass 75th Anniversary 2015 Jeep Compass Altitude 2011 Jeep Compass Base 2015 Jeep Compass High Altitude 2011-2017 Jeep Compass Latitude 2011-2015 Jeep Compass Limited 2012-2017 Jeep Compass Sport 2016 Jeep Patriot 75th Anniversary 2011-2017 Jeep Patriot Latitude 2011 Jeep Patriot Latitude X 2012-2015 Jeep Patriot Limited 2011-2017 Jeep Patriot Sport Installation & More InformationFor detailed installation instructions and user guidance, please visit our Installation Information. Explore our full range of performance upgrades in our Air Intake Systems collection. Enjoy the confidence of quality backed by over 35 years of expertise and a No-Hassle Lifetime Limited Warranty.

Experience a proven performance boost with this premium K&N performance intake kit designed for the Jeep Wrangler 3.6L. Built to outperform factory intakes, this system increases horsepower and torque while delivering superior airflow. Upgrade your Wrangler with confidence and enjoy enhanced engine performance that meets the demands of both daily driving and off-road adventures.Key Features & Benefits High-Density Polyethylene Construction: Durable, rotationally molded tube designed for consistent, improved airflow. Washable, Reusable Air Filter: High-flow air filter featuring oiled cotton media for extended service intervals up to 100,000 miles. Quick Installation: Most systems can be installed in less than 60 minutes with common tools. Optimized Performance: Noticeable improvements in horsepower and torque make this the perfect upgrade for your Jeep Wrangler 3.6L. Keyword-Focused Design: Perfect for those looking to “buy K&N intake kit for Wrangler” or searching for “K&N performance intake kit Jeep Wrangler.” Technical & Legal Information Constructed from premium HDPE with a custom heat shield to minimize engine bay heat exposure. Note that some intakes may not be legal for sale or use on pollution-controlled vehicles in California. For specific CARB status and warranty details, please refer to the product specifications. Installation & FitmentInstallation is simple with clear instructions and technical drawings available through our provided links. Detailed fitment information, including compatibility with various Jeep Wrangler models, can be found in our Jeep Wrangler 2007-2018 (JK) Parts collection. For additional performance parts, explore our Air Intake Systems collection.

Enhance your Dodge Challenger 6.4L V8’s performance with this premium performance intake, engineered specifically to boost horsepower and torque. Constructed from a rugged HDPE rotationally-molded tube and featuring a washable, reusable high-flow air filter, this Challenger performance intake delivers exceptional durability and an easy installation process—all completed in under 60 minutes using basic hand tools.Key Features & Benefits• Robust construction using an HDPE rotationally-molded tube and custom heat shield for optimal intake air cooling• Designed with oiled cotton filter media to maximize power gains and efficiency• Washable, reusable design that provides up to 100,000 miles of dependable performance• Fast and hassle-free installation for a seamless upgradeInstallation & Maintenance• Straightforward installation process (< 60 minutes) with clear instructions for a smooth setup• Extended maintenance intervals thanks to the high-quality, washable filter design• Comprehensive installation instructions available to guide you through every stepExplore our Air Intake SystemsFitment Information• Exclusively designed for the Dodge Challenger 6.4L V8 series to deliver precise performance enhancementsNote: Some intakes may not be legal for sale or use on pollution-controlled vehicles in California. Please check CARB compliance details for your specific vehicle and verify warranty coverage for complete peace of mind.

Upgrade your driving experience with this premium cold air intake system, designed to boost horsepower, sharpen throttle response, and enhance engine sound for Dodge Charger V6 performance parts. Made in the USA and dyno-tested for proven performance gains, this system replaces your stock air box to unlock your engine's full potential—whether you're cruising on highways or hauling heavy loads.Key Features• Dyno-tested for assured horsepower gains• High-flow intake tube engineered for maximum airflow• Custom heat shield that helps keep engine temperatures down• Oversized, washable K&N high-flow cotton air filter for consistent performance• Designed and built in the USA using durable components for long-lasting reliability• Note: Some intakes may not be legal on pollution-controlled vehicles in California—verify CARB compliance for your modelInstallation & WarrantyInstallation is straightforward and can typically be completed in about 60 minutes with detailed, step-by-step instructions provided. The system comes with a No-Hassle Lifetime Limited Warranty, ensuring your factory warranty remains intact while you enjoy a noticeable performance upgrade. For more information on our air intake systems, check out our Air Intake Systems collection.Experience the difference with a performance intake system engineered specifically for your Dodge Charger and similar models, and elevate your driving experience today.

Experience a performance upgrade designed specifically for the 2011-2014 Jeep Grand Cherokee 5.7L V8. This intake kit has been engineered to deliver enhanced horsepower, torque, and throttle response, making it the perfect upgrade for enthusiasts aiming to boost engine efficiency and overall performance.Overview & BenefitsUtilizing a high-density polyethylene (HDPE) rotationally molded tube, this kit maximizes engine airflow. It features a washable, reusable high-flow filter with oiled cotton media to ensure engine efficiency and longevity for up to 100,000 miles. Additionally, a custom heat shield protects the intake air from excessive engine heat, resulting in a significant improvement in performance.Key Features & Installation• Improved horsepower and torque gains• Optimized HDPE tube design for maximum airflow• Washable high-flow air filter with a lifespan of up to 100,000 miles• Custom heat shield to maintain optimal intake temperatures• Quick installation in under 60 minutes with minimal tools• Covered by K&N’s warranty for reliable performanceCompatibility & Legal Notes• Designed for the 2011-2014 Jeep Grand Cherokee 5.7L V8• Refer to the provided PDF for detailed installation instructions• Note: Some models may not be compliant with California emissions regulations – verify specifications for CARB statusFor additional high-performance air intake options, please visit our Air Intake Systems collection.

Rev up your engine's performance with a design that enhances both horsepower and torque while safeguarding essential components in your hot engine bay. Our pioneering air intake system features a fully enclosed air box that protects your filter and incoming air from engine heat, ensuring optimal airflow for dependable power gains.Key Benefits• Fully enclosed air box design provides superior engine bay protection• High-density polyethylene (HDPE) rotationally-molded tube increases airflow volume• Washable, reusable high-flow air filter with oiled cotton media• Extended filter life – up to 100,000 miles under normal highway conditionsSpecifications• Quick, tool-free access with an easy-to-remove air box lid• Installation in less than 60 minutes—get back on the road fast• Engineered for noticeable improvements in horsepower and torque• Constructed with durable, high-density materials to endure harsh conditionsReady to Upgrade?Experience the convenience of low maintenance with our state-of-the-art design and take your vehicle’s performance to the next level. Our system not only delivers impressive power gains but also minimizes service intervals, ensuring a hassle-free upgrade for your truck or Jeep. With reliable performance backed by over 35 years of industry expertise, you can count on this system to provide the performance boost you need. For more cutting-edge products, explore our Air Intake Systems collection.Legal NoteSome intakes may not be legal for sale or use on pollution-controlled vehicles in California. Please check product specifications for CARB compliance details.

Experience enhanced horsepower and torque with the K&N performance intake for the Dodge Ram 1500. This Dodge Ram 1500 V8 5.7L cold air intake is expertly engineered to boost engine performance, making it simple to upgrade your vehicle. If you're looking to purchase a K&N intake for your Dodge Ram 1500, you're in the right spot.Key Features & Benefits• Constructed with a durable HDPE rotationally-molded tube and paired with a washable, reusable high-flow air filter featuring premium oiled cotton filter media.• Designed to deliver noticeable gains in horsepower and torque.• Typically installed in less than 60 minutes using basic tools.• Enjoy extended maintenance intervals of up to 100,000 miles under normal highway conditions.• Backed by a No-Hassle Lifetime Limited Warranty™.• Street legal in most regions; please note, some restrictions apply in California—check CARB status for your vehicle.Installation & CompatibilityInstallation is straightforward with clear instructions provided in the manual. This intake system is specifically designed for Dodge Ram 1500 models, including trims like Laramie, SLT, Sport, TRX, and more. For full fitment details and compatibility, refer to the product specifications and your vehicle manual.For additional air intake options, visit our Air Intake Systems collection.Explore verified Dodge Ram 1500 parts in our Ram 1500 2009-2018 collection for a complete upgrade experience.

Experience enhanced performance with the Dodge Caliber SRT-4 performance intake. Constructed with a high-density polyethylene (HDPE) tube and a washable, reusable high-flow air filter featuring oiled cotton media, this system delivers increased horsepower and improved throttle response for your 2.4L engine. Engineered for power enthusiasts, this K&N Dodge Caliber intake is designed to push your vehicle’s performance limits.Key Benefits• Increased horsepower and torque for a noticeable boost in performance• Enhanced airflow provided by a durable HDPE, rotationally molded tube• Washable, reusable high-flow air filter crafted with premium oiled cotton media• Extended filter life—up to 100,000 miles under normal driving conditions• Custom heat shield that protects intake air from engine bay heat• Easy, user-friendly installation that can typically be completed in under 60 minutesTechnical & Installation DetailsBuilt with high-quality materials, the intake system improves throttle response and engine sound while offering potential performance gains. For detailed installation instructions and maintenance tips, please refer to our Air Intake Systems collection. Note that certain intakes might not be legal for pollution-controlled vehicles in California; always verify the CARB status for your specific vehicle.Compatible with the Dodge Caliber SRT-4 (2008–2009) as detailed below:Fitment Information Year Make Model Submodel 2008-2009 Dodge Caliber SRT-4

Enhance your Jeep Liberty’s performance with this precision-engineered intake system designed specifically for the 2008-2009 Jeep Liberty 3.7L V6. By increasing airflow with an HDPE rotationally molded tube, this K&N performance intake delivers guaranteed improvements in horsepower and torque. Enjoy improved throttle response and smoother acceleration while confidently boosting your engine’s efficiency.Key Benefits Optimized Airflow: Crafted with an HDPE rotationally molded tube for exceptional airflow and enhanced engine performance. High-Flow Air Filter: Equipped with a washable, reusable air filter featuring oiled cotton media that maintains performance over time. Extended Filter Life: The oversized, conical design allows for up to 100,000 miles between filter services under typical highway conditions. Temperature Protection: A custom heat shield protects intake air from the high temperatures in the engine bay. Quick Installation: Typically installs in under 60 minutes for a hassle-free upgrade. Legal Note: Some intakes may not be legal for sale or use on any pollution-controlled vehicle in California—please review CARB status and product specifications. Installation & CompatibilityThis performance intake is easy to install, making it a favorite among both enthusiasts and professionals. It is designed to fit the following Jeep Liberty models: Year Make Model Submodel 2008-2009 Jeep Liberty Limited 2008-2009 Jeep Liberty Sport Discover more high-performance upgrades in our Air Intake Systems collection, offering additional options tailored to your vehicle’s needs.

Experience an immediate boost in performance with this precision-engineered intake kit, perfect for the K&N 07-08 Dodge Dakota intake kit, Dodge Dakota aftermarket performance intake, and Mitsubishi Raider performance upgrades. Designed for select 2007-2008 Dodge Dakota and Mitsubishi Raider models, this system optimizes airflow while increasing horsepower and torque.Key Features High-density polyethylene (HDPE) rotationally molded intake tube for superior airflow Washable, reusable high-flow air filter featuring advanced oiled cotton media Custom heat shield that protects intake air from excessive engine bay heat Quick, user-friendly installation that typically takes under 60 minutes Extended filter service intervals for up to 100,000 miles with regular highway use Installation and ComplianceInstallation is straightforward with detailed instructions available. Some kits may not be legal for use on emissions-controlled vehicles in California. For more detailed instructions and compliance information, please View Detailed Installation Instructions.Vehicle FitmentThis performance intake kit is designed for: 2007 Dodge Dakota (Laramie) 2007-2008 Dodge Dakota (SLT, ST) 2008 Dodge Dakota (Sport, SXT, TRX, TRX4) 2007 Mitsubishi Raider (DuroCross) 2007-2008 Mitsubishi Raider (LS)