Experience a noticeable boost in horsepower and torque with the K&N 2015 Ford F-150 5.0L performance intake kit. Designed for truck enthusiasts, this system optimizes engine airflow—making your ride more powerful while adding reliability and easy maintenance.Key Features & Benefits• HDPE rotationally molded tube increases airflow for improved engine performance• Washable, reusable high-flow air filter with oiled cotton media for sustained efficiency• Custom heat shield protects intake air from engine bay heat• Quick, tool-friendly installation in under 60 minutesInstallation & WarrantyInstallation is straightforward with detailed instructions provided in our installation PDFs. Enjoy peace of mind with our industry-standard warranty and dedicated customer support available 24/7.• Installation instructions: PDF• Additional user guide: PDFPerformance BenefitsMaximize throttle response and overall engine performance, making this Ford F-150 intake upgrade an excellent choice for both daily driving and performance-focused builds. Elevate your truck’s capabilities with a proven, high-performance system.Legal & CompliancePlease note that while designed for optimal performance, some intakes may not be legal for sale or use on emissions-controlled vehicles in California. Always review the CARB status on the product specifications for your specific vehicle to ensure compliance.Enhance your ride today and explore more options in our Air Intake Systems collection.Below is the fitment information for your vehicle: Year Make Model Submodel 2015-2017 Ford F-150 King Ranch 2015-2017 Ford F-150 Lariat 2015-2017 Ford F-150 Platinum 2016-2017 Ford F-150 SSV 2015-2017 Ford F-150 XL 2015-2017 Ford F-150 XLT

Experience a boost in horsepower, torque, and overall engine efficiency with our HDPE molded performance intake kit—designed specifically for Ford Mustang enthusiasts looking for an upgrade. This K&N 2015 Ford Mustang intake kit features a high-density polyethylene tube that maximizes airflow for improved engine output.Key Features• HDPE molded intake tube for enhanced airflow• Washable, reusable high-flow air filter with oiled cotton media• Oversized conical design allowing up to 100,000 miles between services• Custom heat shield to protect intake air from high engine bay temperaturesInstallation & Compliance• Typically installs in less than 60 minutes using common hand tools• Engineered for guaranteed horsepower and torque gains• Some models may not comply with California’s pollution regulations; refer to CARB status in the product specifications for specific vehicle detailsCompatible ModelsThis performance intake kit is ideal for 2015-2017 Ford Mustang EcoBoost and EcoBoost Premium vehicles, ensuring a tailored fit and optimal performance upgrade.Explore our full range of premium air intake solutions in our Air Intake Systems collection or browse top-quality products in our K&N Engineering collection for additional performance enhancements.

Enhance your Ford F-150’s performance with the K&N 11-12 Ford F-150 6.2L V8 Performance Intake Kit. Designed with precision, this kit features a high-density polyethylene (HDPE) rotationally molded tube and a washable, reusable high-flow air filter with premium oiled cotton media to boost airflow and optimize engine performance. Enjoy noticeable gains in horsepower and torque, while benefiting from a system built for lasting durability.Key Features• Increased airflow for improved engine response• Extended filter life up to 100,000 miles under normal conditions• Easy installation in under 60 minutes• Custom heat shield to protect intake air from high engine bay temperaturesTechnical Details• Constructed with robust, rotationally molded HDPE for reliability• Features a high-performance filter designed to be washed and reused• Note: This kit may be restricted for use on pollution-controlled vehicles in California (refer to CARB status in specifications)Compatibility• 2011-2012 Ford F-150 Harley-Davidson Edition• 2011-2012 Ford F-150 Lariat• 2011 Ford F-150 Lariat Limited• 2011-2012 Ford F-150 PlatinumThis performance intake kit is crafted for truck enthusiasts who demand quality and efficiency. Enjoy peace of mind with clear installation guidance and comprehensive user support.Resources• Installation Instructions• User ManualDiscover more high-performance products in our Air Intake Systems collection.

Experience improved performance with our Ford F-150 performance intake kit, designed to optimize airflow, increase horsepower, and provide a smoother throttle response. Created for those looking to upgrade their 3.5L V6 performance, this advanced kit features high-density polyethylene (HDPE) construction along with a custom heat shield for enhanced durability and engine bay protection.Key Benefits• Optimized airflow for increased horsepower and torque• Improved throttle response and a robust engine sound• Washable, reusable high-flow air filter with a lifespan of up to 100,000 miles• Quick and easy installation in under 60 minutes• Custom heat shield to protect against high engine bay temperatures• Precision-engineered for Ford F-150 performance, ensuring a perfect fit• Durable HDPE construction for long-lasting performanceDiscover more performance enhancements in our Air Intake Systems collection.Vehicle Fitment Year Make Model Submodel 2011-2014 Ford F-150 FX2 2011-2014 Ford F-150 FX4 2011-2014 Ford F-150 King Ranch 2011-2014 Ford F-150 Lariat 2013-2014 Ford F-150 Limited 2011-2014 Ford F-150 Platinum 2011-2014 Ford F-150 XL 2011-2014 Ford F-150 XLT Important Information• Some intakes are not approved for sale or use on any pollution-controlled vehicle in California. Please refer to the product specifications for CARB compliance.• For installation and additional guidance, please Download Installation Instructions and Download User Guide.

Elevate your Ford F-150's performance with our K&N performance intake kit designed exclusively for the 5.0L V8 engine. Engineered to increase airflow, horsepower, and torque, this kit provides enhanced throttle response and an exhilarating engine sound on every drive. Enjoy a reliable, durable upgrade that transforms your vehicle's performance.Key Features & Benefits• HDPE rotationally molded tube increases airflow for improved horsepower and torque• Washable, reusable high-flow air filter with oiled cotton media• Custom heat shield safeguards intake air from high engine bay temperatures• Enhanced throttle response for a more dynamic drive• Extended filter service intervals up to 100,000 miles under normal highway conditionsTechnical Specifications & Installation• Material: High-density polyethylene (HDPE) tube for optimal durability• Filter: High-flow air filter featuring reusable, oiled cotton media• Installation: Quick-fit design, typically installed in under 60 minutes• Performance: Noticeable improvements in engine sound and responsiveness• Specifically engineered for the Ford F-150 5.0L V8, ensuring a precise fit and enhanced efficiencyLegal & WarrantyPlease note that while this kit is engineered for high performance, some models may be illegal for registration or use on pollution-controlled vehicles in California. Verify CARB compliance for your vehicle. Enjoy peace of mind with the K&N No-Hassle Lifetime Limited Warranty.Product Fitment Summary:• Fits Ford F-150 models (2011-2014) including FX2, FX4, King Ranch, Lariat, Platinum, STX, XL, and XLTFor more performance solutions, explore our Air Intake Systems collection.

Experience a noticeable boost in horsepower and torque with this high-performance air intake system designed to replace your stock air box. Specifically engineered for Ford F-150 models (FX2 for 2010 and STX, XL, XLT for 2009–2010), this system enhances throttle response and delivers a more aggressive engine sound.Key Benefits• Proven increases in horsepower and torque• Improved engine sound and throttle response for a dynamic driving experience• Quick, easy installation in under 60 minutes• Washable, reusable high-flow air filter rated for up to 100,000 miles• Constructed with durable HDPE rotationally-molded tubing and a custom heat shield to protect intake air from engine bay heatTechnical Details• Advanced HDPE design boosts airflow for optimal engine performance• Serves as a superior replacement for the OEM air box• Precisely fits Ford F-150 FX2 (2010), STX, XL, and XLT (2009–2010) models• Not approved for sale or use on pollution-controlled vehicles in California• For detailed installation instructions, refer to the Installation InstructionsFits• Ford F-150 FX2 (2010)• Ford F-150 STX (2009–2010)• Ford F-150 XL (2009–2010)• Ford F-150 XLT (2009–2010)Explore our Air Intake Systems collection for additional performance-enhancing options.

Rev up your engine's performance with an innovative air intake system engineered to boost airflow and deliver proven horsepower and torque gains. This high-density polyethylene (HDPE) rotationally molded tube, combined with a washable, reusable high-flow air filter featuring oiled cotton media, is built for long-lasting durability and efficiency. A custom heat shield protects the intake air from engine bay heat, ensuring optimal operating temperatures.Key Benefits Improved airflow for proven horsepower and torque increases Durable HDPE construction with advanced heat shielding Filter lasts up to 100,000 miles under normal highway conditions Simple installation in less than 60 minutes using basic hand tools Backed by a No-Hassle Lifetime Limited Warranty™ Installation & Tools Basic hand tools (socket set and screwdrivers) required Typically installed in under 60 minutes Vehicle Fitment Years: 2010-2014 Make: Ford Model: Mustang Submodel: Shelby GT500 Please note, this product may not be legal for use on any pollution-controlled vehicle in California or other regions with strict emissions standards. For detailed CARB status and legal compliance, please refer to the product specifications.For more performance upgrades, check out our Air Intake Systems.

Experience a significant boost in your engine’s performance with our advanced intake system made specifically for the 2010 Ford Mustang V6 4.0L. Enjoy improved airflow that translates to an estimated increase of +6-7 HP and +7 lb-ft of torque, all thanks to our high-density polyethylene, rotationally molded tube, and custom heat shield.Key Features• Enhanced engine airflow for superior performance• Washable, reusable high-flow air filter with oiled cotton media• Oversized, conical design that supports up to 100,000 miles between filter services• Quick installation – typically completed in under 60 minutesPerformance BenefitsOur innovative design not only provides a steady increase in horsepower and torque but also improves throttle response and engine sound. This advanced system is backed by engineering precision, delivering reliable, long-lasting performance while keeping your engine’s temperature under control.Installation & FitmentInstallation is straightforward and supported by detailed instructions:• Installation Time: Less than 60 minutes• Durability: Up to 100,000 miles under normal highway conditionsFor more details, please review our Installation Instructions and User Guide. Year Make Model Submodel 2010 Ford Mustang Base Legal & Warranty InformationPlease note that some intakes may not be legal for sale or use on pollution-controlled vehicles in California. Always check CARB status and review warranty guidelines before installation.Elevate your engine’s performance today—explore our Air Intake Systems collection for more options.

Enhance your Ford truck’s performance with our precision-engineered intake kit. Featuring a high-density HDPE rotationally molded tube, this kit improves airflow for noticeable gains in horsepower and torque. Whether you need the K&N 08-10 Ford F250 Performance Intake Kit, the Ford F450 Performance Intake Kit, or the K&N Performance Intake Kit for the 6.4L V8, this solution is built for efficiency and durability.Key Benefits Guaranteed improvement in horsepower and torque High-density HDPE tube for optimized airflow Washable, reusable high-flow air filter rated for up to 100,000 miles Custom heat shield protects intake air from engine bay heat Quick installation process, usually under 60 minutes Legal usage: Verify CARB compliance on specific parts for vehicles with pollution controls Technical Specifications Material: Rotationally molded HDPE and oiled cotton filter media Installation: Typically completed within 60 minutes; follow the detailed instructions here Warranty: Refer to manufacturer guidelines for warranty information Compliance: Some models may have restrictions for CARB-regulated vehicles CompatibilityThis performance intake kit is an ideal fit for select 2008-2010 Ford trucks, including the F250, F350, F450, and F550 series, available in various trims such as Cabela's, FX4, Harley-Davidson Edition, King Ranch, Lariat, XL, and XLT.For more premium air performance products, visit our Air Intake Systems collection.

Enhance your vehicle’s performance with this precision-engineered air intake kit, designed exclusively for 5.4L V8 engines in select Ford Expedition, Ford F-Series, and Lincoln models. This kit provides improved airflow, offering a noticeable boost in horsepower and torque for better engine responsiveness and overall performance.Key Performance Enhancements• Constructed with a high-density polyethylene (HDPE) rotationally-molded tube that increases airflow and maximizes power output.• Equipped with a high-flow, washable air filter featuring oiled cotton media to ensure long-lasting performance and efficiency.• The oversized conical design supports maintenance intervals of up to 100,000 miles under normal highway conditions.• Integrated custom heat shield protects the intake air from the high temperatures within the engine bay.Easy Installation & Legal ComplianceInstallation is straightforward and can typically be completed in less than 60 minutes with all the required mounting hardware included. Please note that some configurations of this intake kit may not be legal for use on pollution-controlled vehicles in California. Review the CARB status in the product specifications to ensure compliance with local regulations.For additional performance upgrade options, visit our Air Intake Systems collection and explore quality solutions for your truck or Jeep.

Experience a noticeable boost in performance with the K&N 07 Ford F-150 V8-4.6L Performance Intake Kit. Engineered to increase airflow and deliver a significant improvement in horsepower and torque, this upgrade is perfect for enthusiasts looking to optimize engine efficiency and sound. Ideal for both hobbyists and professional drivers, the kit offers a combination of cutting-edge design and reliable ease of installation.Key Features Guaranteed performance boost with an estimated gain of approximately 12 HP and 12 lb-ft of torque Constructed with a high-density polyethylene (HDPE) rotationally molded tube and a washable, high-flow air filter featuring durable oiled cotton media Oversized, conical filter design that supports up to 100,000 miles between services under normal highway conditions Customized heat shield for effective protection against engine heat Quick, tool-friendly installation in under 60 minutes Backed by a No-Hassle Lifetime Limited Warranty for added peace of mind Product Details & BenefitsThis performance intake kit not only enhances throttle response and engine sound but also delivers consistent power improvements—making every drive feel more dynamic. Its innovative design minimizes intake air temperature for sustained performance on the road, ensuring your engine operates at its peak efficiency every time you hit the highway.Specifications Engine Compatibility: Made exclusively for the Ford F-150 (2007-2008 models including FX2, STX, THE 60TH ANNIVERSARY EDITION, XL, and XLT) Materials: HDPE tube paired with an oiled cotton high-flow air filter Installation: Simple, fast setup using basic hand tools Legal Note: Some intakes may not be permitted on pollution-controlled vehicles in California. Please refer to the product specifications for CARB compliance. For additional information and setup instructions, please review the Installation Instructions. Explore other standout products in our Air Intake Systems collection.

Experience significantly boosted engine performance with this high-quality K&N Ford Explorer V8 intake kit designed specifically for 2006–2008 Ford Explorers, including the Eddie Bauer, Limited, and XLT trims. Engineered with advanced HDPE rotational molding, this performance intake offers increased airflow, horsepower, and torque while maintaining exceptional durability. Ideal for enthusiasts seeking a performance intake upgrade for a 2006 Ford Explorer or a reliable Ford Explorer intake upgrade, this system delivers noticeable improvements in engine efficiency and driving dynamics. Note that certain intakes may not be legal for sale or use on pollution-controlled vehicles in California; please review CARB status for your specific model.Key Performance Features• HDPE rotationally molded tube for optimal airflow enhancement• Washable and reusable high-flow air filter with oiled cotton media for consistent performance• Oversized conical filter design providing up to 100,000 miles between filter maintenance under normal highway conditions• Custom-engineered heat shield to protect intake air from engine bay temperatures• Simple, hassle-free installation, typically completed in under 60 minutes• Compliant with federal regulations (check CARB status) for worry-free upgradesFitment & InstallationThis performance kit is specifically designed for 2006–2008 Ford Explorer models, ensuring a precise fit for Eddie Bauer, Limited, and XLT versions. Installation is straightforward with clear guidelines provided, making it accessible even for those new to performance upgrades.For more cutting-edge performance solutions, explore our Air Intake Systems collection and experience the Everything Truck Parts commitment to excellence.

Experience enhanced performance with this advanced cold air intake kit, designed specifically for Ford F-150 enthusiasts. Featuring a high-density polyethylene (HDPE) rotationally molded tube that significantly increases airflow, you can expect noticeable gains in horsepower and torque along with improved throttle response. Built to endure, this system includes a washable, reusable High-Flow Air Filter with premium oiled cotton filter media that allows up to 100,000 miles between filter services under regular highway conditions. Enjoy the peace of mind that comes with a No-Hassle Lifetime Limited Warranty, backed by our industry-leading expertise.Key Benefits• HDPE rotationally molded tube for improved engine airflow• Washable High-Flow Air Filter designed for cost-effectiveness• Custom heat shield to protect intake air from engine bay temperatures• Quick, straightforward installation process – typically under 60 minutes• Noticeable performance gains for a more responsive accelerationCompatibilityThis cold air intake is engineered exclusively for several Ford F-150 models, including:• 2005-2008 F-150 STX• 2008 F-150 THE 60TH ANNIVERSARY EDITION• 2005-2008 F-150 XL• 2005-2008 F-150 XLTPlease note: Some intakes may not comply with pollution regulations in certain states, such as California. Refer to the product specifications for CARB compliance details.Explore similar products in our Air Intake Systems collection and experience the difference today.

Rev up your engine's performance with this high-performance intake kit designed for 2007-2009 Mustang models. Engineered as a premium K&N Mustang Shelby intake kit and V8-5.4L intake kit for Mustang enthusiasts, it delivers improved horsepower, enhanced torque, and an aggressive engine note that transforms your driving experience.Key Features & Benefits• Constructed with a durable high-density polyethylene (HDPE) rotationally molded tube for increased airflow and efficiency.• Includes a washable, reusable high-flow air filter featuring oiled cotton media for lasting performance.• Custom-designed heat shield that protects the intake air from engine bay temperatures.• Extended filter service intervals—up to 100,000 miles under normal highway conditions—reduce maintenance costs.• Designed for a hassle-free, tool-free installation in under 60 minutes.Installation & Fitment• Quick and straightforward installation process that gets you back on the road faster.• Vehicle Compatibility:– 2007-2009 Ford Mustang Shelby GT500– 2008-2009 Ford Mustang Shelby GT500KR• Please refer to the product specifications for CARB compliance, as some intakes may be restricted for sale or use on pollution-controlled vehicles in California.ResourcesFor detailed guidance, please check our Installation Instructions and additional user documentation here.Discover more performance-enhancing products in our Air Intake Systems collection.

Experience a noticeable boost in power and efficiency with our high-performance intake system engineered specifically for the Ford F250 V8-5.4L. This innovative kit is designed as a premium “K&N Ford F250 intake kit” and also serves as a “05-06 Ford F250 performance intake kit” and “Ford F250 5.4L intake system” to help maximize horsepower, torque, and throttle response. Constructed with a high-density polyethylene (HDPE) rotationally molded tube and paired with a washable, reusable high-flow air filter, this system delivers consistent airflow improvements while ensuring long-lasting durability. Installation is fast and straightforward, so you can upgrade your engine in under 60 minutes.Key Performance Features Guaranteed increases in horsepower and torque Enhanced airflow thanks to a precision-engineered HDPE tube Washable, reusable high-flow air filter with up to 100,000 miles of service life Simple installation process (typically under 60 minutes) Custom heat shield to protect intake air from engine heat Legal & Warranty Information Not legal on any pollution-controlled motor vehicle in California; please verify CARB status Supported by the K&N No-Hassle Lifetime Limited Warranty For detailed guidance, please review our Installation Instructions and User Manual.Fits Year Make Model Submodel 2005 Ford Excursion Eddie Bauer 2005 Ford Excursion Limited 2005 Ford Excursion XLS 2005 Ford Excursion XLT 2005-2006 Ford F-250 Super Duty King Ranch 2005-2006 Ford F-250 Super Duty Lariat 2005-2006 Ford F-250 Super Duty XL 2005-2006 Ford F-250 Super Duty XLT 2005-2006 Ford F-350 Super Duty King Ranch 2005-2006 Ford F-350 Super Duty Lariat 2005-2006 Ford F-350 Super Duty XL 2005-2006 Ford F-350 Super Duty XLT Explore our Air Intake Systems collection for additional performance upgrades and accessories to complete your vehicle’s transformation.

This high-performance intake kit is specifically engineered for the K&N 06 Ford F150 V8-4.6L, providing a significant boost in horsepower, torque, and overall engine responsiveness. Designed for the dedicated Ford F150 enthusiast, this upgrade leverages an HDPE rotationally molded intake tube to maximize airflow while offering a blend of durability and efficiency.Key Features• HDPE rotationally molded intake tube that increases airflow for better engine performance.• Washable, reusable high-flow air filter with oiled cotton media for consistent efficiency.• Oversized, conical design allowing up to 100,000 miles between filter maintenance under typical highway conditions.• Custom heat shield that protects intake air from engine bay heat.• Quick installation—typically completed in under 60 minutes.Easy Installation & CompatibilityThis performance intake kit is designed for a hassle-free installation and is specifically engineered to fit the 2006 Ford F150 models, including STX, XL, and XLT. Below is the fitment information for your convenience: Year Make Model Submodel 2006 Ford F-150 STX 2006 Ford F-150 XL 2006 Ford F-150 XLT Experience improved throttle response and a more aggressive engine sound while enjoying a long service life between cleanings. Please note that some intakes may not be legal for sale or use on pollution-controlled vehicles in California—refer to product specifications for CARB status.Enhance your ride further by exploring our Air Intake Systems collection.

Upgrade your engine performance with our high-performance intake system, designed to deliver increased horsepower and torque. This innovative Ford F-Series performance intake solution offers an optimal experience for buyers seeking a K&N intake kit for the Ford Super Duty, enhancing airflow while providing improved throttle response and a dynamic engine sound. Discover our collection of high-performance products in our Air Intake Systems selection.Key Features Rotationally molded high-density polyethylene (HDPE) tube for maximum airflow Washable, reusable High-Flow Air Filter featuring premium oiled cotton media Custom heat shield that protects intake air from high engine bay temperatures Simple installation in less than 60 minutes Extended service life – up to 100,000 miles under typical highway conditions CARB compliance note: Some models are not legal for use on pollution-controlled vehicles in California Technical Details & Fitment 2005 Ford F-250 Super Duty – Harley-Davidson Edition 2005-2006 Ford F-250 Super Duty – King Ranch, Lariat, XL, XLT 2005 Ford F-350 Super Duty – Harley-Davidson Edition 2005-2006 Ford F-350 Super Duty – King Ranch, Lariat, XL, XLT Helpful Resources View Installation Instructions User Manual

The K&N 05-09 Ford Mustang V6-4.0L Performance Intake Kit is designed for car enthusiasts looking to boost engine performance. Crafted with precision, this intake kit improves airflow and delivers increased horsepower and torque, perfect for both everyday drivers and performance lovers.Key Features• HDPE rotationally-molded tube optimizes airflow efficiency• Washable, reusable high-flow air filter with oiled cotton media supports up to 100,000 miles between services• Custom heat shield reduces the impact of engine bay temperatures• Fast, user-friendly installation—usually completed in less than 60 minutes• Engineered for reliable, long-term performance with a commitment to qualityInstallation & ComplianceInstallation is simple with detailed instructions available in our resources. Refer to the Installation Instructions and User Manual for complete installation steps. Please note that this performance kit might not be legal for use on pollution-controlled vehicles in California; check the CARB status for your specific vehicle.Fit ForIdeal for 2005-2009 Ford Mustang Base models, this performance intake kit is precisely engineered for your vehicle.Discover more high-performance options in our Air Intake Systems collection.

Experience a significant boost in your Mustang GT’s performance with an intake kit engineered for improved airflow, horsepower, and torque. Specifically designed for 2005–2006 Ford Mustang GT models, this upgrade features an HDPE rotationally-molded tube to optimize your engine’s breathing, delivering noticeable performance benefits with every drive.Key Features HDPE rotationally-molded intake tube crafted to maximize airflow Washable, reusable High-Flow Air Filter with premium oiled cotton media Custom heat shield that protects intake air from engine bay heat Quick, user-friendly installation typically under 60 minutes Extended filter service interval of up to 100,000 miles This kit is engineered not only to enhance horsepower and torque but also to simplify maintenance, backed by proven reliability and quality performance. Detailed installation instructions are provided, ensuring you can install it with confidence. Please note that, depending on your vehicle’s emissions controls, this product may not be legally used on pollution-controlled vehicles in California—check CARB status and legal guidelines for your specific model.Compatibility2005–2006 Ford Mustang GTEnhance your Mustang’s performance today—install easily and feel the difference. Explore more performance options in our Air Intake Systems collection.

Enhance your Mercury Marauder’s performance with the K&N 03-04 Mercury Marauder V8 intake kit. Designed to increase horsepower and torque, this performance intake kit is built for enthusiasts seeking dependable, high-performance upgrades for their vehicle.Key Benefits• Made from durable, rotationally molded high-density polyethylene to maximize airflow.• Includes a washable high-flow air filter with oiled cotton media for consistent performance.• Features an oversized, conical design that supports up to 100,000 miles between filter services under normal highway conditions.• Equipped with a custom heat shield to protect intake air from engine bay heat.• Typically installs in less than 60 minutes for a quick upgrade.• Note: Some intakes may not be legal for use on pollution-controlled vehicles in states like California; please check your local regulations.For detailed instructions, please review our Installation Instructions.Fitment Year Make Model Submodel 2003-2004 Mercury Marauder Base Explore additional performance parts in our Air Intake Systems collection.

Boost your engine's performance with a high-density, HDPE rotationally molded air intake system designed for the Ford Thunderbird. This upgrade has been dyno-tested to provide noticeable increases in horsepower, faster throttle response, and a more aggressive engine sound. It replaces your factory air box, delivering a proven performance boost.Key Features Dyno-tested for increased airflow to enhance horsepower and torque Durable HDPE molded tube engineered for aggressive performance Washable, reusable high-flow air filter with oiled cotton media—up to 100,000 miles between services Custom heat shield that protects intake air from high engine bay temperatures Quick installation in less than 60 minutes for a hassle-free upgrade Direct replacement for the factory air box with proven results For detailed installation instructions, please refer to our Air Intake Systems collection. Note that this product may not be legal for use on pollution-controlled vehicles in California or other emission states—always check CARB compliance before purchase.Vehicle Fitment 2005 Ford Thunderbird – 50th Anniversary Edition 2003-2005 Ford Thunderbird – Base Edition 2003 Ford Thunderbird – James Bond Edition 2004 Ford Thunderbird – Pacific Coast Roadster

The K&N 04 Ford Ranger / Mazda B4000 V6-4.0L Performance Intake Kit is engineered to enhance your engine’s output, delivering noticeable improvements in horsepower and torque. Experience a smoother throttle response and a more aggressive engine sound, making every drive—whether cruising on the highway or navigating off-road—more thrilling.Key Benefits• Rotationally molded HDPE tube designed to maximize airflow• Washable, reusable high-flow air filter featuring oiled cotton media• Custom heat shield that protects intake air from the heat in the engine bay• Quick installation process that takes less than 60 minutesWhat You Need to KnowConstructed from durable high-density polyethylene, this intake kit is optimized for maximum efficiency. Its oversized conical filter design allows for up to 100,000 miles between services under typical highway driving conditions. It is specifically tailored to fit a variety of Ford Ranger models—including the Edge, FX4, Sport, STX, Tremor, XL, and XLT—as well as Mazda B4000 editions. Please note that some configurations of this intake may not be legal on pollution-controlled vehicles in California; consult CARB guidelines for your specific vehicle.Installation & GuidesFor detailed installation instructions, please refer to our Installation Instructions and User Guide.Visit our Air Intake Systems collection for additional performance upgrade options.

Experience a noticeable boost in your engine's performance with this premium performance intake kit, specifically engineered for Ford Ranger and Mazda B3000 V6/3.0L engines. Designed to enhance airflow, this upgrade delivers increased horsepower and torque, supporting proven performance improvements for daily driving as well as off-road adventures.Key Benefits• Constructed with a high-density polyethylene (HDPE) rotationally molded tube for optimized airflow and improved engine efficiency• Includes a washable, reusable High-Flow Air Filter with oiled cotton media, allowing service intervals up to 100,000 miles• Custom heat shield design effectively protects intake air from engine bay heat• Quick and simple installation, with most setups completed in under 60 minutes• Performs reliably under intense use, offering benefits such as improved engine sound and enhanced throttle response• Note: Some configurations may not comply with CARB regulations; please review product details to ensure compatibility with California lawsInstallation & FitThis intake system is designed for a straightforward installation process. Detailed instructions are provided in the included installation guides, ensuring even first-time installers can complete the setup quickly and correctly. For full fitment details—including model years, makes, and trims for Ford Ranger and Mazda B3000—please refer to the Product Fit section further down the page.For more performance-enhancing parts, visit our Air Intake Systems collection.

Upgrade your performance with the K&N Performance Intake Kit – designed to maximize airflow while boosting horsepower and torque for your engine. Specially crafted with Lincoln Navigator performance parts in mind, this innovative system is your ideal upgrade for improved driving dynamics and reliability.Key Benefits• Enhanced airflow for strong engine performance• Guaranteed improvements in horsepower and torque• Durable high-density polyethylene (HDPE) rotationally-molded tube for optimum airflow• Washable, reusable High-Flow Air Filter featuring premium oiled cotton media• Long-lasting service life – up to 100,000 miles under typical highway conditions• Quick, tool-friendly installation in under 60 minutes• Custom heat shield to safeguard intake air from engine bay heatTechnical & Installation DetailsConstructed with top-quality materials, the intake kit features an HDPE rotationally-molded tube paired with a high-flow air filter, ensuring both durability and efficiency. The design is optimized for peak performance, though legal use may vary – please check CARB compliance for your specific vehicle. Installation is straightforward; detailed instructions are provided for your convenience. Refer to our complete guidelines in the documentation for a hassle-free setup.Fitment DetailsThis Part Fits: Year Make Model Submodel 2000-2002 Lincoln Navigator Base Explore more performance-enhancing parts in our Air Intake Systems collection and experience the Everything Truck Parts difference.

Experience a noticeable boost in engine performance with our K&N 04 Ford F-150 V8-4.6L Performance Intake Kit. Crafted with a high-density polyethylene (HDPE) rotationally molded tube, this system is designed to enhance airflow and deliver a guaranteed increase in horsepower and torque, making it an ideal upgrade for your Ford F-150.Key Benefits• Boosts engine performance with increased airflow• Guaranteed horsepower and torque improvements• Washable, reusable High-Flow Air Filter™ featuring oiled cotton media for up to 100,000 miles between services• Custom heat shield protects intake air from high engine bay temperatures• Simple installation in under 60 minutes with minimal tools• Dyno-tested performance benefits and peace of mind with our No-Hassle Lifetime Limited Warranty (where applicable)• Street legal in all US states (verify CARB status through product specifications)The installation process is straightforward and designed for both enthusiasts and professionals. Comprehensive installation instructions are provided, ensuring you can have your intake system ready to perform in less than an hour.Fitment Details Year Make Model Submodel 2004-2005 Ford F-150 STX 2004-2005 Ford F-150 XL 2004-2005 Ford F-150 XLT For more performance upgrades and air intake options, check out our Air Intake Systems collection or explore dedicated parts for your vehicle in the Ford F-150 2004-2008 Parts collection.

This performance kit is engineered exclusively for the Ford F-150 V8-5.4L, delivering a noticeable boost in horsepower and torque. Every component is designed to optimize your engine’s performance while meeting the demands of both the DIY mechanic and performance enthusiast.Key Benefits• A durable HDPE rotationally-molded tube increases airflow for enhanced performance.• A washable, reusable high-flow air filter with oiled cotton media ensures your engine breathes easy.• A custom heat shield protects intake air from engine bay heat.• Installation is straightforward and typically takes less than 60 minutes using hand tools.• Enjoy up to 100,000 miles between filter services under normal highway driving conditions.Installation & Maintenance• Easily install the kit with basic hand tools.• For detailed guidance, please review the Installation Instructions and User Manual.Warranty & LegalThis product comes with our commitment to quality and reliability. Please note that some intakes may not be legal for sale or use on pollution-controlled vehicles in certain regions (such as California). Always check product specifications for CARB status specific to your vehicle.Fitment DetailsThe kit is specifically designed for Ford F-150 models. Year Model Submodel 2007-2008 F-150 FX2 2004-2008 F-150 FX4 2006-2008 F-150 Harley-Davidson Edition 2005-2008 F-150 King Ranch 2004-2008 F-150 Lariat 2008 F-150 Limited 2008 F-150 THE 60TH ANNIVERSARY EDITION 2004-2008 F-150 XL 2004-2008 F-150 XLT Explore our full range of performance-enhancing products in our Air Intake Systems collection to further upgrade your ride.

Experience a significant boost in performance with the K&N Performance Intake Kit designed specifically for your 2003-2004 Ford Mustang Mach 1 V8-4.6L DOHC. This kit guarantees increased horsepower and torque by optimizing engine airflow, helping you unlock the full potential of your Mustang’s powerful engine.Key Features HDPE rotationally molded tube construction for superior durability Washable, reusable High-Flow Air Filter with oiled cotton media Extended filter life – service up to 100,000 miles under normal highway conditions Custom heat shield that safeguards against high engine bay temperatures Quick, DIY installation typically completed in less than 60 minutes CA-compliance disclaimer: Some intakes may not be legal for use on pollution-controlled vehicles in California Fitment & Compatibility Year Make Model Submodel 2003-2004 Ford Mustang Mach 1 Installation & WarrantyInstallation is straightforward with clear, step-by-step instructions, making it hassle-free for both beginners and seasoned enthusiasts. Enjoy peace of mind backed by Everything Truck Parts’ commitment to quality and exceptional customer support. Be sure to review the product specifications for warranty details and emission compliance.For more premium air intake systems, check out our Air Intake Systems collection or explore our range of K&N Engineering products.

Enhance your engine's performance with our precision-engineered K&N intake kit designed for Ford Ranger, Mazda B3000, and V6 3.0L engines. Unlock improved horsepower and torque through enhanced airflow and advanced filtration, optimizing your vehicle's responsiveness and efficiency.Key Benefits• High-density polyethylene roto-molded tube boosts airflow for improved throttle response.• Washable, reusable high-flow air filter with oiled cotton media delivers consistent performance, lasting up to 100,000 miles.• Custom heat shield protects the intake air from engine bay heat for sustained power.• Quick, straightforward installation—upgrade your Ford Ranger intake or Mazda B3000 performance intake in under 60 minutes.Easy Installation and ComplianceThis kit includes all necessary hardware, so you can purchase a K&N intake kit with confidence and install it with minimal tools. Please note that some intakes may not be legal on vehicles subject to emissions regulations in California—refer to the product specifications for CARB status details.Vehicle FitmentSpecifically designed for 2002-2003 Ford Ranger models (Edge, XL, XLT) and Mazda B3000 variants (Base, DS, SE). For more performance-enhancing parts, visit our Air Intake Systems collection to explore additional upgrades.

Boost your Ford Crown Victoria V8–4.6L’s performance with our high-efficiency intake kit, designed to improve engine airflow, horsepower, and torque. Constructed with a durable, HDPE rotationally molded tube and paired with a washable, reusable high-flow air filter featuring oiled cotton media, this system provides reliable performance while keeping maintenance low. The specially engineered oversized conical design allows for up to 100,000 miles between filter services under normal highway conditions.Key Advantages• Guaranteed increase in horsepower and torque• Washable, reusable high-flow air filter with oiled cotton media• Oversized conical design with extended service intervals up to 100,000 miles• Custom heat shield protects intake air from engine bay heat• Quick, tool-friendly installation in less than 60 minutesTechnical & Legal DetailsMade from high-density polyethylene, this system is built for durability and efficiency. Please note that some intakes may not be legally sold or used on pollution-controlled vehicles in California. Always refer to the product specifications for CARB status and specific vehicle compliance details. This performance intake kit is an excellent choice for any enthusiast looking to upgrade their Ford Crown Victoria V8–4.6L engine setup.For a smooth installation process, refer to the following resources:Installation Instructions | User ManualExplore our Air Intake Systems collection for more performance-enhancing solutions.Compatibility Year Make Model Submodel 2003 Ford Crown Victoria Base 2003 Ford Crown Victoria LWB 2003 Ford Crown Victoria LX 2003 Ford Crown Victoria Police Interceptor 2003 Ford Crown Victoria S

Experience an immediate boost in engine performance with our high-performance K&N Performance Intake Kit. Specially built for Ford Ranger (2001–2003) and Mazda B2300 models, this kit is crafted to enhance your vehicle’s horsepower, torque, and throttle response, all while delivering an unmistakably aggressive engine note.Performance Benefits• Improved airflow with a high-density polyethylene (HDPE) rotationally molded tube that maximizes engine breathing• Enhanced throttle response combined with an aggressive engine sound• Potential gains of up to 16 HP* with an optimized intake design (*Exact gains may vary)Quality Construction & Design• Constructed with a durable HDPE tube engineered for longevity and improved airflow• Includes a washable, reusable high-flow air filter featuring premium oiled cotton media for an extended service life of up to 100,000 miles• Custom heat shield effectively channels engine bay heat away, ensuring cooler intake air and more efficient performanceQuick Installation & Fitment• Easy installation that typically takes less than 60 minutes, with detailed instructions provided• Note: Some intakes may not be compliant with California’s emission standards. Check the CARB status in the product specifications.Vehicle Compatibility:• Ford Ranger – Years: 2001-2003, Submodels: XL, XLT• Mazda B2300 – Models: Base, SE, SXExplore more performance enhancements in our Air Intake Systems collection.

Experience a significant boost in your engine's performance with this advanced performance intake kit designed for Lincoln Navigator enthusiasts and truck owners looking for a real upgrade. Constructed with a high-density polyethylene (HDPE) rotationally molded tube and a washable, reusable High-Flow Air Filter featuring oiled cotton media, this system is built to enhance throttle response, improve engine sound, and increase horsepower and torque—potentially adding up to 11 HP at 4600 RPM and an increase of 14 lb-ft in torque.Key Benefits• Enhanced engine performance and smoother throttle response• Extended maintenance intervals with an oversized, conical filter design that lasts up to 100,000 miles under normal highway conditions• Quick and uncomplicated installation in less than 60 minutes using common tools• Custom heat shield formulated to protect intake air from high engine bay temperatures• Supported by a No-Hassle Lifetime Limited Warranty for your peace of mind• Please note: This intake kit may not be legal for use on pollution-controlled motor vehicles in California. Check the CARB status in the product specifications for applicable vehicles.Technical Specifications• Material: HDPE rotationally molded tube• Filter: Washable, reusable High-Flow Air Filter with oiled cotton media• Design: Conical intake system with custom heat shield• Service Interval: Up to 100,000 miles between filter maintenance Year Make Model Submodel 2003-2004 Lincoln Navigator Base Discover more performance solutions in our Air Intake Systems collection.

Experience improved engine performance with a high-density polyethylene air intake system engineered specifically for Ford F-150 V6-4.2L engines. This upgrade increases airflow to boost horsepower and torque, making it the perfect choice for anyone looking for a reliable performance enhancement and better throttle response.Key Features HDPE rotationally molded tube boosts airflow for enhanced engine performance. High-flow, washable, and reusable oiled cotton air filter provides up to 100,000 miles of service under typical highway conditions. Custom heat shield protects intake air from the high temperatures in the engine bay. Straightforward installation typically takes less than 60 minutes with basic tools. Please note: Some intakes may not comply with CARB regulations for pollution-controlled vehicles in California. Check the product specifications for CARB status. Specifications Guarantees an increase in horsepower and torque for a noticeable performance improvement. Made with durable HDPE and premium oiled cotton filter media to ensure long-lasting reliability. For exact dimensions and further installation instructions, please refer to the provided documentation. Fitment Information 1997-2000 Ford F-150 Base 1997-2003 Ford F-150 XL 1997-2003 Ford F-150 XLT 2004 Ford F-150 Heritage XL 2004 Ford F-150 Heritage XLT This performance upgrade is an excellent option for enthusiasts looking to upgrade to a K&N Performance Intake Kit for the Ford F-150, delivering increased horsepower for V6-4.2L engines and an overall enhanced performance. Discover more quality parts in our Air Intake Systems collection.

Enhance your engine’s performance with this high-performance intake kit featuring a high-density polyethylene (HDPE) rotationally molded tube designed specifically for select Ford F-150 and Lightning models. Engineered to boost horsepower and torque, this kit improves throttle response and engine sound while offering long-lasting durability even under heavy use.Key Features High-density polyethylene intake tube for improved airflow Washable, reusable High-Flow Air Filter with oiled cotton media Oversized, conical filter design offering up to 100,000 miles of service under normal highway conditions Custom heat shield to protect intake air from engine bay heat Quick installation in under 60 minutes for a hassle-free upgrade Installation & UsageInstallation is simple—most enthusiasts finish the setup in less than an hour. Refer to the Installation Instructions and User Guide for detailed steps and optimal tips.Vehicle CompatibilityUpgrade your ride if you drive one of these models: 2002-2003 Ford F-150 (Harley-Davidson Edition) 2001-2003 Ford F-150 (Lightning) 2004 Ford F-150 Heritage (SVT Lightning) Note: Some intakes may not be legal for use on pollution-controlled vehicles in California. Check the CARB status for your specific vehicle to ensure compliance.Ready to boost your engine’s performance? Order now and experience the difference. For additional performance enhancements, explore our Air Intake Systems collection.

Enhance your Ford F-150 Lightning’s performance with this high-performance intake kit designed specifically for 1999–2000 models. Engineered for the 5.4L V8 engine, this kit features a high-density polyethylene (HDPE) rotationally molded tube that maximizes airflow and boosts horsepower and torque—comparable to an estimated gain of around 15 HP at 5,000 RPM. Paired with a washable, reusable high-flow air filter using oiled cotton media, this upgrade is built to last under demanding conditions.Key Benefits• Durable HDPE rotationally molded intake tube for optimal airflow• Washable, high-flow air filter with oiled cotton media• Custom heat shield that cools intake air by repelling engine bay heat• Quick and straightforward installation—typically under 60 minutes• Extended maintenance intervals, offering up to 100,000 miles between filter servicesTechnical and Compatibility DetailsThis Ford Lightning V8 intake performance upgrade is compatible with 1999–2000 Ford F-150 Lightning models, ensuring a precise fit and effective results. The design supports noticeable improvements in engine performance, providing enhancements in both horsepower and torque for a more responsive drive.Installation and Legal NoteInstallation is made user-friendly with clear instructions provided. For detailed guidance, please refer to the Installation Instructions PDF available on the product page. Note that some intakes may not be legal for use on pollution-controlled vehicles in California. Always check the CARB status for your specific vehicle application.Discover more high-performance upgrades in our Air Intake Systems collection and experience the difference this quality Ford Lightning upgrade can make.

Enhance your vehicle’s performance with the K&N 03-07 Ford F-Series / Excursion V8 performance intake kit. Constructed with a robust high-density polyethylene (HDPE) tube and a washable high-flow air filter featuring oiled cotton media, this kit is designed to increase airflow, boost horsepower, and improve torque. Its custom heat shield keeps intake air cool by protecting it from engine heat, and with an installation time of less than 60 minutes, it’s a straightforward upgrade for your Ford truck or Excursion V8.Key Features• Guaranteed increases in horsepower and torque• Durable HDPE rotationally-molded intake tube• Washable, reusable high-flow air filter• Extended filter service intervals up to 100,000 miles• Custom-designed heat shield for superior engine bay protection• Quick and easy installation (under 60 minutes)Technical Specifications• Material: High-density polyethylene tube and oiled cotton filter media• Performance: Enhanced airflow leading to measurable gains in horsepower and torque (vehicle-dependent)• Installation: Comes with all necessary hardware for a secure fit• Fitment: Designed for select 2003–2007 Ford Excursion and F-Series modelsInstallation & ComplianceThis performance intake kit may have limited use in California based on CARB regulations. For detailed installation instructions and compliance information, please review the Air Intake Systems collection page and provided PDF resources.

Experience a substantial boost in performance with the K&N 57-2545 FIPK Air Intake System, designed exclusively for 2003–2004 Ford Mustang SVT Cobra models. This advanced system replaces the restrictive factory air filter and intake housing, ensuring smoother airflow for improved engine breathing and consistent power gains throughout the RPM range.Key Features Significantly increases airflow by smoothing and straightening incoming air Includes a chrome-capped high-flow air filter and a precision-engineered heat shield Maintains compatibility with the factory mass air sensor and crankcase vent hose Designed to last for up to 100,000 miles under proper driving conditions Street legal in all 50 US states and supported by K&N’s Million Mile Limited Warranty Easy installation, typically taking 90 minutes or less with standard tools Specifications Optimized to replace the factory air intake system, enhancing throttle response and acceleration Designed to deliver greater horsepower and torque by allowing more air into your engine Engineered for durability and longevity, ensuring minimal maintenance over extended use Precisely fits to maintain factory sensor functionality while upgrading performance Fitment DetailsThis air intake system fits seamlessly on 2003–2004 Ford Mustang SVT Cobra models, including the SVT Cobra 10th Anniversary edition. For additional performance upgrades, explore our Air Intake Systems collection.Upgrade your ride with confidence, knowing this product is engineered for quality, performance, and long-lasting reliability.