This new Gen II system retains the factory track width keeping the tires under the fenders for a clean appearance. With the factory track width retained the front Sway Bar utilizes the stock end links and mounting holes keeping the leverage on the bar proper. There are no CV spacers, impact struts or add a leafs required for installation. The front differential is relocated in a manner so that when driving at higher 4 wheel drive speeds vibration is reduced. For aggressive offroad driving the GEN II Performance System comes with either Dirt Logic 2.5 Coilovers featuring Eibach coil springs or massive Dirt Logic 4.0 Coilovers. Rear Dirt Logic 2.25's complete this highly tuned system. All bracketry and the skid plate is constructed of 1/4" thick steel for maximum strength and proven reliability. This 6" system will level the stance of the vehicle compared to the factory nose down rake. For those customers that want a factory nose down appearance order optional add a leaf, Part #FTS212. The system passes FMVSS 126 standards for stability control functionality as tested by an independent lab.This Part Fits: Year Make Model Submodel 2017-2018 Chevrolet Silverado 1500 Custom 2014-2015,2017-2018 Chevrolet Silverado 1500 High Country 2015,2017-2018 Chevrolet Silverado 1500 LS 2014-2015,2017-2018 Chevrolet Silverado 1500 LT 2014-2015,2017-2018 Chevrolet Silverado 1500 LTZ 2015,2017-2018 Chevrolet Silverado 1500 SSV 2014-2015,2017-2018 Chevrolet Silverado 1500 WT 2014-2015,2017-2018 GMC Sierra 1500 Base 2014-2015,2017-2018 GMC Sierra 1500 Denali 2014-2015,2017-2018 GMC Sierra 1500 SLE 2014-2015,2017-2018 GMC Sierra 1500 SLT

This new Gen II system retains the factory track width keeping the tires under the fenders for a clean appearance. With the factory track width retained the front Sway Bar utilizes the stock end links and mounting holes keeping the leverage on the bar proper. There are no CV spacers, impact struts or add a leafs required for installation. The front differential is relocated in a manner so that when driving at higher 4 wheel drive speeds vibration is reduced. The GEN II Basic System utilizes a simplistic upper Coilover spacer that provides lift from the top of the shock rather than bottom up with reduced install time. Rear shocks are Performance Twin Tubes. All bracketry and the skid plate is constructed of 1/4" thick steel for maximum strength and proven reliability. This 6" system will level the stance of the vehicle compared to the factory nose down rake. For those customers that want a factory nose down appearance order optional add a leaf, Part #FTS212. The system passes FMVSS 126 standards for stability control functionality as tested by an independent lab.This Part Fits: Year Make Model Submodel 2017-2018 Chevrolet Silverado 1500 Custom 2014-2015,2017-2018 Chevrolet Silverado 1500 High Country 2015,2017-2018 Chevrolet Silverado 1500 LS 2014-2015,2017-2018 Chevrolet Silverado 1500 LT 2014-2015,2017-2018 Chevrolet Silverado 1500 LTZ 2015,2017-2018 Chevrolet Silverado 1500 SSV 2014-2015,2017-2018 Chevrolet Silverado 1500 WT 2014-2015,2017-2018 GMC Sierra 1500 Base 2014-2015,2017-2018 GMC Sierra 1500 Denali 2014-2015,2017-2018 GMC Sierra 1500 SLE 2014-2015,2017-2018 GMC Sierra 1500 SLT

This new Gen II system retains the factory track width keeping the tires under the fenders for a clean appearance. With the factory track width retained the front Sway Bar utilizes the stock end links and mounting holes keeping the leverage on the bar proper. There are no CV spacers, impact struts or add a leafs required for installation. The front differential is relocated in a manner so that when driving at higher 4 wheel drive speeds vibration is reduced. The GEN II Basic System utilizes a simplistic upper Coilover spacer that provides lift from the top of the shock rather than bottom up with reduced install time. Rear shocks are Performance Twin Tubes. All bracketry and the skid plate are constructed of 1/4" thick steel for maximum strength and proven reliability. This 6" system will level the stance of the vehicle compared to the factory nose down rake. For those customers that want a factory nose down appearance order optional add a leaf, Part #FTS212. The system passes FMVSS 126 standards for stability control functionality as tested by an independent lab.This Part Fits: Year Make Model Submodel 2017-2018 Chevrolet Silverado 1500 Custom 2014-2015,2017-2018 Chevrolet Silverado 1500 High Country 2015,2017-2018 Chevrolet Silverado 1500 LS 2014-2015,2017-2018 Chevrolet Silverado 1500 LT 2014-2015,2017-2018 Chevrolet Silverado 1500 LTZ 2015,2017-2018 Chevrolet Silverado 1500 SSV 2014-2015,2017-2018 Chevrolet Silverado 1500 WT 2014-2015,2017-2018 GMC Sierra 1500 Base 2014-2015,2017-2018 GMC Sierra 1500 Denali 2014-2015,2017-2018 GMC Sierra 1500 SLE 2014-2015,2017-2018 GMC Sierra 1500 SLT

This new Gen II system retains the factory track width keeping the tires under the fenders for a clean appearance. With the factory track width retained the front Sway Bar utilizes the stock end links and mounting holes keeping the leverage on the bar proper. There are no CV spacers, impact struts or add a leafs required for installation. The front differential is relocated in a manner so that when driving at higher 4 wheel drive speeds vibration is reduced. For aggressive offroad driving the GEN II Performance System comes with either Dirt Logic 2.5 Coilovers featuring Eibach coil springs or massive Dirt Logic 4.0 Coilovers. Rear Dirt Logic 2.25's complete this highly tuned system. All bracketry and the skid plate is constructed of 1/4" thick steel for maximum strength and proven reliability. This 6" system will level the stance of the vehicle compared to the factory nose down rake. For those customers that want a factory nose down appearance order optional add a leaf, Part # FTS212. The system passes FMVSS 126 standards for stability control functionality as tested by an independent lab.This Part Fits: Year Make Model Submodel 2017-2018 Chevrolet Silverado 1500 Custom 2014-2015,2017-2018 Chevrolet Silverado 1500 High Country 2015,2017-2018 Chevrolet Silverado 1500 LS 2014-2015,2017-2018 Chevrolet Silverado 1500 LT 2014-2015,2017-2018 Chevrolet Silverado 1500 LTZ 2015,2017-2018 Chevrolet Silverado 1500 SSV 2014-2015,2017-2018 Chevrolet Silverado 1500 WT 2014-2015,2017-2018 GMC Sierra 1500 Base 2014-2015,2017-2018 GMC Sierra 1500 Denali 2014-2015,2017-2018 GMC Sierra 1500 SLE 2014-2015,2017-2018 GMC Sierra 1500 SLT

This new Gen II system retains the factory track width keeping the tires under the fenders for a clean appearance. With the factory track width retained the front Sway Bar utilizes the stock end links and mounting holes keeping the leverage on the bar proper. There are no CV spacers, impact struts or add a leafs required for installation. The front differential is relocated in a manner so that when driving at higher 4 wheel drive speeds vibration is reduced. The GEN II Basic System utilizes a simplistic upper Coilover spacer that provides lift from the top of the shock rather than bottom up with reduced install time. Rear shocks are Performance Twin Tubes. All bracketry and the skid plate are constructed of 1/4" thick steel for maximum strength and proven reliability. This 6" system will level the stance of the vehicle compared to the factory nose down rake. For those customers that want a factory nose down appearance order optional add a leaf, Part # FTS212. The system passes FMVSS 126 standards for stability control functionality as tested by an independent lab.This Part Fits: Year Make Model Submodel 2017-2018 Chevrolet Silverado 1500 Custom 2014-2015,2017-2018 Chevrolet Silverado 1500 High Country 2015,2017-2018 Chevrolet Silverado 1500 LS 2014-2015,2017-2018 Chevrolet Silverado 1500 LT 2014-2015,2017-2018 Chevrolet Silverado 1500 LTZ 2015,2017-2018 Chevrolet Silverado 1500 SSV 2014-2015,2017-2018 Chevrolet Silverado 1500 WT 2014-2015,2017-2018 GMC Sierra 1500 Base 2014-2015,2017-2018 GMC Sierra 1500 Denali 2014-2015,2017-2018 GMC Sierra 1500 SLE 2014-2015,2017-2018 GMC Sierra 1500 SLT

This system features our proven one piece high arched lower crossmember design with an integrated differential skid plate for solid support of the front suspension. Special attention was given to the design of replacement extended length steering knuckles to keep the track width of the vehicle near stock while retaining turning radius for easy maneuverability in tight areas. The rear system features extended length tubular upper and lower link arms with an oversized Trac bar relocation bracket to properly place the axle under the vehicle with zero driveline vibration. Rear coil springs maintain proper ride height. The Basic System also includes front strut assembly spacers and rear performance coil springs. This system provides a stock like ride and is compatible with all MagnaRide and Non MagnaRide models. This system qualifies for our 5/60 Powertrain Warranty.This Part Fits: Year Make Model Submodel 2015-2017,2019-2020 Chevrolet Suburban LS 2015-2017,2019-2020 Chevrolet Suburban LT 2015-2016 Chevrolet Suburban LTZ 2017,2019-2020 Chevrolet Suburban Premier 2015-2020 Chevrolet Tahoe LS 2015-2020 Chevrolet Tahoe LT 2015-2016 Chevrolet Tahoe LTZ 2015-2020 Chevrolet Tahoe PPV 2017-2020 Chevrolet Tahoe Premier 2015-2020 Chevrolet Tahoe SSV 2014 GMC Sierra 1500 Base 2014 GMC Sierra 1500 Denali 2014 GMC Sierra 1500 SLE 2014 GMC Sierra 1500 SLT 2015,2019-2020 GMC Yukon Denali 2015,2019-2020 GMC Yukon SLE 2015,2019-2020 GMC Yukon SLT 2016-2020 GMC Yukon XL Denali 2015-2020 GMC Yukon XL SLE 2015-2020 GMC Yukon XL SLT

Our 6" Performance System has been designed utilizing our industry leading crossmember and spindle technology. Extensive design work was given to the extended length steering knuckles to keep track width near stock and working properly with the Stablitrac? safety functions. The front differential is relocated with heavy duty brackets while a tightly formed 1/4 " thick steel skid plate provides protection for offroad use. The rear suspension is upgraded with add a leafs and 5" tall blocks and u bolts. What sets this 6" Performance system apart from our 6" Basic is the Dirt Logic Shocks. The factory front Coilover shocks are replaced with massive Dirt Logic 4.0 Coilovers for the ultimate in damping capacity. One look at these huge Coilovers and you'll know that you have the biggest shock package under your truck for hardcore offroad use. The Dirt Logic 4.0's have been ride tuned by our shock engineers to provide a supple highway ride with outstanding damping. The rear suspension receives Dirt Logic 2.25 shocks that are tuned for a compliant highway ride with great offroad capability. Dirt Logics are the finest shocks you can buy for your vehicle and will provide a quality ride you can feel each time you drive. - Front lower control arm Crossmember forms to bottom of frame without cutting Offset ductile Steering Knuckles keep tires under fenders Includes Crossmember cross tubes to distribute front suspension impact loads Massive Dirt Logic 4.0 Coilovers for unparalleled offroad damping Rear Dirt Logic 2.25 shocks provide increased damping and smooth ride Systems compatible with factory Stablitrac.This Part Fits: Year Make Model Submodel 2017 Chevrolet Silverado 1500 Custom 2014,2017-2018 Chevrolet Silverado 1500 High Country 2015,2017-2018 Chevrolet Silverado 1500 LS 2014-2015,2017-2018 Chevrolet Silverado 1500 LT 2014-2015,2017-2018 Chevrolet Silverado 1500 LTZ 2017 Chevrolet Silverado 1500 SSV 2014-2015,2017 Chevrolet Silverado 1500 WT 2014-2015,2017-2018 GMC Sierra 1500 Base 2017-2018 GMC Sierra 1500 Denali 2014-2015,2017-2018 GMC Sierra 1500 SLE 2014-2015,2017-2018 GMC Sierra 1500 SLT

Our 6" Performance System has been designed utilizing our industry leading crossmember and spindle technology. Extensive design work was given to the extended length steering knuckles specifically for the Steel component version keeping track width near stock and working properly with the Stablitrac? safety functions. The front differential is relocated with heavy duty brackets while a tightly formed 1/4 " thick steel skid plate provides protection for offroad use. The rear suspension is upgraded with add a leafs and 5" tall blocks and u bolts. What sets this 6" Performance system apart from our 6" Basic is the Dirt Logic Shocks. The factory front Coilover shocks are replaced with massive Dirt Logic 4.0 Coilovers for the ultimate in damping capacity. One look at these huge Coilovers and you'll know that you have the biggest shock package under your truck for hardcore offroad use. The Dirt Logic 4.0's have been ride tuned by our shock engineers to provide a supple highway ride with outstanding damping. The rear suspension receives Dirt Logic 2.25 shocks that are tuned for a compliant highway ride with great offroad capability. Dirt Logics are the finest shocks you can buy for your vehicle and will provide a quality ride you can feel each time you drive. - Front lower control arm Crossmember forms to bottom of frame without cutting Offset ductile Steering Knuckles keep tires under fenders Includes Crossmember cross tubes to distribute front suspension impact loads Top of the line Dirt Logic shocks for superior damping and ride Systems compatible with factory Stablitrac.This Part Fits: Year Make Model Submodel 2017 Chevrolet Silverado 1500 Custom 2014-2015,2017-2018 Chevrolet Silverado 1500 High Country 2015,2017-2018 Chevrolet Silverado 1500 LS 2014-2015,2017-2018 Chevrolet Silverado 1500 LT 2014-2015,2017-2018 Chevrolet Silverado 1500 LTZ 2015,2017 Chevrolet Silverado 1500 SSV 2014-2015,2017 Chevrolet Silverado 1500 WT 2014-2015,2017-2018 GMC Sierra 1500 Base 2015,2017-2018 GMC Sierra 1500 Denali 2014-2015,2017-2018 GMC Sierra 1500 SLE 2014-2015,2017-2018 GMC Sierra 1500 SLT

This system offers a mild lift height with easy installation for clearance of 33" tall tires on K1500s. Lift is accomplished by utilizing the factory front Coilover shocks with steel spacer system that helps retain the stock ride of the front suspension. The stock upper control arms are replaced with high quality tubular Uniball arms that allow unrestricted movement throughout the travel range. The arms are constructed of top quality material including .120" wall 4130 Chromoly tubing with a 1.50" OD and 1" FK Stainless PTFE Uniballs. These arms are the best on the market for aggressive offroad driving in harsh conditions. The front differential is relocated to keep CV angles proper with the new lift height while a 1/4" thick steel skid plate provides protection against offroad obstacles. Rear lift is accomplished with 1 1/2" rear lift block and u-bolts to help level the stance of the vehicles. Performance rear shock absorbers replace the stock units for increased damping. - Increased ground clearance. -Top quality Uniball Upper Control Arms for aggressive offroad use. -1" ID American made FK Uniballs with PTFE for ultimate strength. -Increased fender clearance compared to a Leveling Kit for 33" tall tires. -Suspension can be restored to stock.This Part Fits: Year Make Model Submodel 2016-2018 Chevrolet Silverado 1500 Custom 2014-2018 Chevrolet Silverado 1500 High Country 2015-2018 Chevrolet Silverado 1500 LS 2014-2018 Chevrolet Silverado 1500 LT 2014-2018 Chevrolet Silverado 1500 LTZ 2015-2018 Chevrolet Silverado 1500 SSV 2014-2018 Chevrolet Silverado 1500 WT 2014-2018 GMC Sierra 1500 Base 2014-2018 GMC Sierra 1500 Denali 2014-2018 GMC Sierra 1500 SLE 2014-2018 GMC Sierra 1500 SLT

This system offers a mild lift height with easy installation for clearance of 33" tall tires on K1500s. Lift is accomplished with Dirt Logic 2.5 Coilovers that provide superior damping for aggressive offroad use and a good highway ride. The stock upper control arms are replaced with high quality tubular Uniball arms that allow unrestricted movement throughout the travel range. The arms are constructed of top quality material including .120" wall 4130 Chromoly tubing with a 1.50" OD and 1" FK Stainless PTFE Uniballs. These arms are the best on the market for aggressive offroad driving in harsh conditions. The front differential is relocated to keep CV angles proper with the new lift height while a 1/4" thick steel skid plate provides protection against offroad obstacles. Rear lift is accomplished with 1 1/2" rear lift block and u-bolts to help level the stance of the vehicles. Dirt Logic 2.25 rear shock absorbers replace the stock units for increased damping for both on and offroad use. -Best in class system for aggressive offroad use and good highway ride. -Increased ground clearance. -Top quality Uniball Upper Control Arms for aggressive offroad use. -1" ID American made FK Uniballs with PTFE for ultimate strength. -Includes Dirt Logic 2.5 Coilovers for superior damping. -Increased fender clearance compared to a Leveling Kit for 33" tall tires. -Suspension can be restored to stock.This Part Fits: Year Make Model Submodel 2016-2018 Chevrolet Silverado 1500 Custom 2014-2018 Chevrolet Silverado 1500 High Country 2015-2018 Chevrolet Silverado 1500 LS 2014-2018 Chevrolet Silverado 1500 LT 2014-2018 Chevrolet Silverado 1500 LTZ 2015-2018 Chevrolet Silverado 1500 SSV 2014-2018 Chevrolet Silverado 1500 WT 2014-2018 GMC Sierra 1500 Base 2014-2018 GMC Sierra 1500 Denali 2014-2018 GMC Sierra 1500 SLE 2014-2018 GMC Sierra 1500 SLT

This system offers a mild lift height with easy installation for clearance of 33" tall tires on K1500s. Lift is accomplished by utilizing the factory front Coilover shocks with steel spacer system that helps retain the stock ride of the front suspension. The stock upper control arms are replaced with high quality tubular Uniball arms that allow unrestricted movement throughout the travel range. The arms are constructed of top quality material including .120" wall 4130 Chromoly tubing with a 1.50" OD and 1" FK Stainless PTFE Uniballs. These arms are the best on the market for aggressive offroad driving in harsh conditions. The front differential is relocated to keep CV angles proper with the new lift height while a 1/4" thick steel skid plate provides protection against offroad obstacles. Rear lift is accomplished with 1 1/2" rear lift block and u-bolts to help level the stance of the vehicles. Performance rear shock absorbers replace the stock units for increased damping. - Increased ground clearance. -Top quality Uniball Upper Control Arms for aggressive offroad use. -1" ID American made FK Uniballs with PTFE for ultimate strength. -Increased fender clearance compared to a Leveling Kit for 33" tall tires. -Suspension can be restored to stock.This Part Fits: Year Make Model Submodel 2016-2018 Chevrolet Silverado 1500 Custom 2014-2018 Chevrolet Silverado 1500 High Country 2015-2018 Chevrolet Silverado 1500 LS 2014-2018 Chevrolet Silverado 1500 LT 2014-2018 Chevrolet Silverado 1500 LTZ 2015-2018 Chevrolet Silverado 1500 SSV 2014-2018 Chevrolet Silverado 1500 WT 2014-2018 GMC Sierra 1500 Base 2014-2018 GMC Sierra 1500 Denali 2014-2018 GMC Sierra 1500 SLE 2014-2018 GMC Sierra 1500 SLT

This system offers a mild lift height with easy installation for clearance of 33" tall tires on K1500's. Lift is accomplished with Dirt Logic 2.5 Coilovers that provide superior damping for aggressive offroad use and a good highway ride. The stock upper control arms are replaced with thick wall DOM tubular arms that feature heavy duty extended range ball joints. These ball joints provide additional strength to the vehicles suspension compared to the factory. The front differential is relocated to keep CV angles proper with the new lift height while a 1/4" thick steel skid plate provides protection against offroad obstacles. Rear lift is accomplished with 1 1/2" rear lift block and u-bolts to help level the stance of the vehicles. Dirt Logic 2.25 rear shock absorbers replace the stock units for increased damping for both on and offroad use. - Value priced system with Fabtech quality Increased ground clearance Includes Dirt Logic 2.5 Coilovers for superior damping Extended range upper ball joints provide a smooth quiet ride Increased fender clearance compared to a Leveling Kit for 33" tall tires Suspension can be restored to stock.This Part Fits: Year Make Model Submodel 2016-2018 Chevrolet Silverado 1500 Custom 2014-2018 Chevrolet Silverado 1500 High Country 2015-2018 Chevrolet Silverado 1500 LS 2014-2018 Chevrolet Silverado 1500 LT 2014-2018 Chevrolet Silverado 1500 LTZ 2015-2018 Chevrolet Silverado 1500 SSV 2014-2018 Chevrolet Silverado 1500 WT 2014-2018 GMC Sierra 1500 Base 2014-2018 GMC Sierra 1500 Denali 2014-2018 GMC Sierra 1500 SLE 2014-2018 GMC Sierra 1500 SLT

Arms eliminate upper ball joint w/ super strong 1" ID Stainless American Uniball - Additional caster is built into Arms for greater align ability to help with problematic leveling kit alignments - Allows for increased wheel travel when used with Dirt Logic 2.5 Coilover shocks - Chromoly tubing reduces flex found in stock arms for more positive road feel - 17-4 Stainless Steel Heat treated Uniball pin fits into factory ball joint taper without modification to the spindle for easy return to stock feature - Arms are direct replacements for factory arms on suspensions that require additional strength and align ability. Material Construction Specs. - Built with same materials as found on Trophy Trucks - .120" Wall 4130 Chromoly Tubing. 1.50" OD. - .250" wall DOM Bushing Barrels - 1" ID Stainless Steel American Uniball - 17-4 Stainless Misalignments - 17-4 Stainless Steel Heat treated Uniball pins.This Part Fits: Year Make Model Submodel 2017 Chevrolet Silverado 1500 Custom 2014-2015,2017-2018 Chevrolet Silverado 1500 High Country 2015,2017-2018 Chevrolet Silverado 1500 LS 2014-2015,2017-2018 Chevrolet Silverado 1500 LT 2014-2015,2017-2018 Chevrolet Silverado 1500 LTZ 2015,2017 Chevrolet Silverado 1500 SSV 2014-2015,2017 Chevrolet Silverado 1500 WT 2014-2015,2017-2018 GMC Sierra 1500 Base 2015,2017-2018 GMC Sierra 1500 Denali 2014-2015,2017-2018 GMC Sierra 1500 SLE 2014-2015,2017-2018 GMC Sierra 1500 SLT

Our 6" Basic System has been designed utilizing our industry leading crossmember and spindle technology. Lift is accomplished by utilizing the factory front Coilover shocks with steel spacers that helps retain the stock ride of the front suspension. Extensive design work was given to the extended length steering knuckles to keep track width near stock and working properly with the Stablitrac? safety functions. The front differential is relocated with heavy duty brackets while a tightly formed 1/4 " thick steel skid plate provides protection for offroad use. The rear suspension is upgraded with add a leafs and 5" tall blocks and u bolts. The stock rear shocks are replaced with Stealth Shocks for increase dampening. - Front lower control arm Crossmember forms to bottom of frame without cutting Offset ductile Steering Knuckles keep tires under fenders Includes Crossmember cross tubes to distribute front suspension impact loads No disassembly of factory coilover assembly required for installation Systems compatible with factory Stablitrac.This Part Fits: Year Make Model Submodel 2016-2018 Chevrolet Silverado 1500 Custom 2014-2018 Chevrolet Silverado 1500 High Country 2015-2018 Chevrolet Silverado 1500 LS 2014-2018 Chevrolet Silverado 1500 LT 2014-2018 Chevrolet Silverado 1500 LTZ 2015-2018 Chevrolet Silverado 1500 SSV 2014-2018 Chevrolet Silverado 1500 WT 2014-2018 GMC Sierra 1500 Base 2014-2018 GMC Sierra 1500 Denali 2014-2018 GMC Sierra 1500 SLE 2014-2018 GMC Sierra 1500 SLT

Our 6" Performance System has been designed utilizing our industry leading crossmember and spindle technology. Extensive design work was given to the extended length steering knuckles to keep track width near stock and working properly with the Stablitrac? safety functions. The front differential is relocated with heavy duty brackets while a tightly formed 1/4 " thick steel skid plate provides protection for offroad use. The rear suspension is upgraded with add a leafs and 5" tall blocks and u bolts. What sets this 6" Performance system apart from our 6" Basic is the Dirt Logic Shocks. The factory front Coilover shocks are replaced with Dirt Logic 2.5 Coilovers that have been ride tuned by our in house shock experts to provide a supple highway ride with excellent offroad damping. These 2.5 Coilovers include Eibach coil springs for the best possible ride. The rear suspension receives Dirt Logic 2.25 shocks that are tuned for a compliant highway ride with great offroad capability. Dirt Logics are the finest shocks you can buy for your vehicle and will provide a quality ride you can feel each time you drive. - Front lower control arm Crossmember forms to bottom of frame without cutting Offset ductile Steering Knuckles keep tires under fenders Includes Crossmember cross tubes to distribute front suspension impact loads Top of the line Dirt Logic shocks for superior damping and ride Systems compatible with factory Stablitrac.This Part Fits: Year Make Model Submodel 2016-2018 Chevrolet Silverado 1500 Custom 2014-2018 Chevrolet Silverado 1500 High Country 2015-2018 Chevrolet Silverado 1500 LS 2014-2018 Chevrolet Silverado 1500 LT 2014-2018 Chevrolet Silverado 1500 LTZ 2015-2018 Chevrolet Silverado 1500 SSV 2014-2018 Chevrolet Silverado 1500 WT 2014-2018 GMC Sierra 1500 Base 2015-2018 GMC Sierra 1500 Denali 2014-2018 GMC Sierra 1500 SLE 2014-2018 GMC Sierra 1500 SLT

Our 6" Basic System has been designed utilizing our industry leading crossmember and spindle technology. Lift is accomplished by utilizing the factory front Coilover shocks with steel spacers that helps retain the stock ride of the front suspension. Extensive design work was given to the extended length steering knuckles to keep track width near stock and working properly with the Stablitrac? safety functions. The front differential is relocated with heavy duty brackets while a tightly formed 1/4 " thick steel skid plate provides protection for offroad use. The rear suspension is upgraded with add a leafs and 5" tall blocks and u bolts. The stock rear shocks are replaced with Performance shocks for increase dampening. - Front lower control arm Crossmember forms to bottom of frame without cutting Offset ductile Steering Knuckles keep tires under fenders Includes Crossmember cross tubes to distribute front suspension impact loads No disassembly of factory coilover assembly required for installation Systems compatible with factory Stablitrac.This Part Fits: Year Make Model Submodel 2016-2018 Chevrolet Silverado 1500 Custom 2014-2018 Chevrolet Silverado 1500 High Country 2015-2018 Chevrolet Silverado 1500 LS 2014-2018 Chevrolet Silverado 1500 LT 2014-2018 Chevrolet Silverado 1500 LTZ 2015-2018 Chevrolet Silverado 1500 SSV 2014-2018 Chevrolet Silverado 1500 WT 2014-2018 GMC Sierra 1500 Base 2014-2018 GMC Sierra 1500 Denali 2014-2018 GMC Sierra 1500 SLE 2014-2018 GMC Sierra 1500 SLT

Our 6" Basic System has been designed utilizing our industry leading crossmember and spindle technology. Lift is accomplished by utilizing the factory front Coilover shocks with steel spacers that helps retain the stock ride of the front suspension. Extensive design work was given to the extended length steering knuckles specifically for the Steel component version keeping track width near stock and working properly with the Stablitrac? safety functions. The front differential is relocated with heavy duty brackets while a tightly formed 1/4 " thick steel skid plate provides protection for offroad use. The rear suspension is upgraded with add a leafs and 5" tall blocks and u bolts. The stock rear shocks are replaced with Stealth Shocks for increase damping. Offset ductile Steering Knuckles keep tires under fenders Includes Crossmember cross tubes to distribute front suspension impact loads No disassembly of factory coilover assembly required for installation Systems compatible with factory Stablitrac.This Part Fits: Year Make Model Submodel 2017-2018 Chevrolet Silverado 1500 Custom 2014-2015,2017-2018 Chevrolet Silverado 1500 High Country 2015,2017-2018 Chevrolet Silverado 1500 LS 2014-2015,2017-2018 Chevrolet Silverado 1500 LT 2014-2015,2017-2018 Chevrolet Silverado 1500 LTZ 2015,2017-2018 Chevrolet Silverado 1500 SSV 2014-2015,2017-2018 Chevrolet Silverado 1500 WT 2014-2015,2017-2018 GMC Sierra 1500 Base 2014-2015,2017-2018 GMC Sierra 1500 Denali 2014-2015,2017-2018 GMC Sierra 1500 SLE 2014-2015,2017-2018 GMC Sierra 1500 SLT

Our 6" Performance System has been designed utilizing our industry leading crossmember and spindle technology. Extensive design work was given to the extended length steering knuckles specifically for the Steel component version keeping track width near stock and working properly with the Stablitrac? safety functions. The front differential is relocated with heavy duty brackets while a tightly formed 1/4 " thick steel skid plate provides protection for offroad use. The rear suspension is upgraded with add a leafs and 5" tall blocks and u bolts. What sets this 6" Performance system apart from our 6" Basic is the Dirt Logic Shocks. The factory front Coilover shocks are replaced with Dirt Logic 2.5 Coilovers that have been ride tuned by our in house shock experts to provide a supple highway ride with excellent offroad damping. These 2.5 Coilovers include Eibach coil springs for the best possible ride. The rear suspension receives Dirt Logic 2.25 shocks that are tuned for a compliant highway ride with great offroad capability. Dirt Logics are the finest shocks you can buy for your vehicle and will provide a quality ride you can feel each time you drive. - Front lower control arm Crossmember forms to bottom of frame without cutting Offset ductile Steering Knuckles keep tires under fenders Includes Crossmember cross tubes to distribute front suspension impact loads Top of the line Dirt Logic shocks for superior damping and ride Systems compatible with factory Stablitrac.This Part Fits: Year Make Model Submodel 2017-2018 Chevrolet Silverado 1500 Custom 2014-2015,2017-2018 Chevrolet Silverado 1500 High Country 2015,2017-2018 Chevrolet Silverado 1500 LS 2014-2015,2017-2018 Chevrolet Silverado 1500 LT 2014-2015,2017-2018 Chevrolet Silverado 1500 LTZ 2015,2017-2018 Chevrolet Silverado 1500 SSV 2014-2015,2017-2018 Chevrolet Silverado 1500 WT 2014-2015,2017-2018 GMC Sierra 1500 Base 2015,2017-2018 GMC Sierra 1500 Denali 2014-2015,2017-2018 GMC Sierra 1500 SLE 2014-2015,2017-2018 GMC Sierra 1500 SLT

Our 6" Basic System has been designed utilizing our industry leading crossmember and spindle technology. Lift is accomplished by utilizing the factory front Coilover shocks with steel spacers that helps retain the stock ride of the front suspension. Extensive design work was given to the extended length steering knuckles specifically for the Steel component version keeping track width near stock and working properly with the Stablitrac? safety functions. The front differential is relocated with heavy duty brackets while a tightly formed 1/4 " thick steel skid plate provides protection for offroad use. The rear suspension is upgraded with add a leafs and 5" tall blocks and u bolts. The stock rear shocks are replaced with Performance shocks for increase damping. Offset ductile Steering Knuckles keep tires under fenders Includes Crossmember cross tubes to distribute front suspension impact loads No disassembly of factory coilover assembly required for installation Systems compatible with factory Stablitrac.This Part Fits: Year Make Model Submodel 2017-2018 Chevrolet Silverado 1500 Custom 2014-2015,2017-2018 Chevrolet Silverado 1500 High Country 2015,2017-2018 Chevrolet Silverado 1500 LS 2014-2015,2017-2018 Chevrolet Silverado 1500 LT 2014-2015,2017-2018 Chevrolet Silverado 1500 LTZ 2015,2017-2018 Chevrolet Silverado 1500 SSV 2014-2015,2017-2018 Chevrolet Silverado 1500 WT 2014-2015,2017-2018 GMC Sierra 1500 Base 2014-2015,2017-2018 GMC Sierra 1500 Denali 2014-2015,2017-2018 GMC Sierra 1500 SLE 2014-2015,2017-2018 GMC Sierra 1500 SLT

The 4'' Ultimate System is available with our Uniball Upper Control Arms that feature .120'' wall 4130 Chromoly tubing with a 1.50'' OD 1'' FK Stainless PTFE Uniballs for 9'' of front wheel travel. The system also includes heavy duty ductile iron steering knuckles and forged adjusting torsion bar keys to provide the proper amount of lift without CV bind. The system will level the stance of the vehicle compared to the factory nose down rake with no change to the rear suspension. For those customers that require a factory nose down appearance an optional 1'' rear block kit is available. Uniball Upper Control Arms are available separately as an upgrade to stock, previously installed Fabtech'suspensions or other aftermarket suspension systems. Includes front 2.5 Dirt Logic Stainless Steel coil over shocks and rear 2.25 Dirt Logic Stainless Steel shocks.This Part Fits: Year Make Model Submodel 2015-2019 Chevrolet Silverado 2500 HD High Country 2011-2019 Chevrolet Silverado 2500 HD LT 2011-2019 Chevrolet Silverado 2500 HD LTZ 2011-2019 Chevrolet Silverado 2500 HD WT 2015-2019 Chevrolet Silverado 3500 HD High Country 2011-2019 Chevrolet Silverado 3500 HD LT 2011-2019 Chevrolet Silverado 3500 HD LTZ 2011-2019 Chevrolet Silverado 3500 HD WT 2015-2019 GMC Sierra 2500 HD Base 2011-2019 GMC Sierra 2500 HD Denali 2011-2019 GMC Sierra 2500 HD SLE 2011-2019 GMC Sierra 2500 HD SLT 2011-2014 GMC Sierra 2500 HD WT 2015-2019 GMC Sierra 3500 HD Base 2011-2019 GMC Sierra 3500 HD Denali 2011-2019 GMC Sierra 3500 HD SLE 2011-2019 GMC Sierra 3500 HD SLT 2011-2014 GMC Sierra 3500 HD WT

The 4'' Ultimate System is available with our Uniball Upper Control Arms that feature .120'' wall 4130 Chromoly tubing with a 1.50'' OD 1'' FK Stainless PTFE Uniballs for 9'' of front wheel travel. The system also includes heavy duty ductile iron steering knuckles and forged adjusting torsion bar keys to provide the proper amount of lift without CV bind. The system will level the stance of the vehicle compared to the factory nose down rake with no change to the rear suspension. For those customers that require a factory nose down appearance an optional 1'' rear block kit is available. Uniball Upper Control Arms are available separately as an upgrade to stock, previously installed Fabtech'suspensions or other aftermarket suspension systems.This Part Fits: Year Make Model Submodel 2015-2019 Chevrolet Silverado 2500 HD High Country 2011-2019 Chevrolet Silverado 2500 HD LT 2011-2019 Chevrolet Silverado 2500 HD LTZ 2011-2019 Chevrolet Silverado 2500 HD WT 2015-2019 Chevrolet Silverado 3500 HD High Country 2011-2019 Chevrolet Silverado 3500 HD LT 2011-2019 Chevrolet Silverado 3500 HD LTZ 2011-2019 Chevrolet Silverado 3500 HD WT 2015-2019 GMC Sierra 2500 HD Base 2011-2019 GMC Sierra 2500 HD Denali 2011-2019 GMC Sierra 2500 HD SLE 2011-2019 GMC Sierra 2500 HD SLT 2011-2014 GMC Sierra 2500 HD WT 2015-2019 GMC Sierra 3500 HD Base 2011-2019 GMC Sierra 3500 HD Denali 2011-2019 GMC Sierra 3500 HD SLE 2011-2019 GMC Sierra 3500 HD SLT 2011-2014 GMC Sierra 3500 HD WT

The 4'' Ultimate System is available with our Uniball Upper Control Arms that feature .120'' wall 4130 Chromoly tubing with a 1.50'' OD 1'' FK Stainless PTFE Uniballs for 9'' of front wheel travel. The system also includes heavy duty ductile iron steering knuckles and forged adjusting torsion bar keys to provide the proper amount of lift without CV bind. The system will level the stance of the vehicle compared to the factory nose down rake with no change to the rear suspension. For those customers that require a factory nose down appearance an optional 1'' rear block kit is available. Uniball Upper Control Arms are available separately as an upgrade to stock, previously installed Fabtech'suspensions or other aftermarket suspension systems.This Part Fits: Year Make Model Submodel 2015-2019 Chevrolet Silverado 2500 HD High Country 2011-2019 Chevrolet Silverado 2500 HD LT 2011-2019 Chevrolet Silverado 2500 HD LTZ 2011-2019 Chevrolet Silverado 2500 HD WT 2015-2019 Chevrolet Silverado 3500 HD High Country 2011-2019 Chevrolet Silverado 3500 HD LT 2011-2019 Chevrolet Silverado 3500 HD LTZ 2011-2019 Chevrolet Silverado 3500 HD WT 2015-2019 GMC Sierra 2500 HD Base 2011-2019 GMC Sierra 2500 HD Denali 2011-2019 GMC Sierra 2500 HD SLE 2011-2019 GMC Sierra 2500 HD SLT 2011-2014 GMC Sierra 2500 HD WT 2015-2019 GMC Sierra 3500 HD Base 2011-2019 GMC Sierra 3500 HD Denali 2011-2019 GMC Sierra 3500 HD SLE 2011-2019 GMC Sierra 3500 HD SLT 2011-2014 GMC Sierra 3500 HD WT

This system offers a mild lift height with easy installation for clearance of 33" tall tires on GM C/K1500s. Lift is accomplished with Dirt Logic 2.5 Coilovers that provide superior damping for aggressive offroad use and a good highway ride. The stock upper control arms are replaced with high quality tubular Uniball arms that allow unrestricted movement throughout the travel range. The arms are constructed of top quality material including .120" wall 4130 Chromoly tubing with a 1.50" OD and 1" FK Stainless PTFE Uniballs. These arms are the best on the market for aggressive offroad driving in harsh conditions. The front differential is relocated to keep CV angles proper with the new lift height while a 1/4" thick steel skid plate provides protection against offroad obstacles. Rear lift is accomplished with 1 1/2" rear lift block and u-bolts to help level the stance of the vehicles. Dirt Logic 2.25 rear shock absorbers replace the stock units for increased damping for both on and offroad use. - Best in class system for aggressive offroad use and good highway ride Increased ground clearance Top quality Uniball Upper Control Arms for aggressive offroad use 1" ID American made FK Uniballs with PTFE for ultimate strength Includes Dirt Logic 2.5 Coilovers for superior damping Increased fender clearance compared to a Leveling Kit for 33" tall tires Suspension can be restored to stock.This Part Fits: Year Make Model Submodel 2017 Chevrolet Silverado 1500 Custom 2014-2015,2017-2018 Chevrolet Silverado 1500 High Country 2009-2013 Chevrolet Silverado 1500 Hybrid 2007-2013,2015,2017-2018 Chevrolet Silverado 1500 LS 2007-2015,2017-2018 Chevrolet Silverado 1500 LT 2007-2015,2017-2018 Chevrolet Silverado 1500 LTZ 2015,2017 Chevrolet Silverado 1500 SSV 2007-2015,2017 Chevrolet Silverado 1500 WT 2010-2013 Chevrolet Silverado 1500 XFE 2007 Chevrolet Silverado 1500 Classic Hybrid 2007 Chevrolet Silverado 1500 Classic LS 2007 Chevrolet Silverado 1500 Classic LT 2007 Chevrolet Silverado 1500 Classic SS 2007 Chevrolet Silverado 1500 Classic WT 2007 Chevrolet Silverado 1500 HD Classic LT 2014-2015,2017-2018 GMC Sierra 1500 Base 2007-2015,2017-2018 GMC Sierra 1500 Denali 2009-2013 GMC Sierra 1500 Hybrid 2007-2013 GMC Sierra 1500 SL 2007-2015,2017-2018 GMC Sierra 1500 SLE 2007-2015,2017-2018 GMC Sierra 1500 SLT 2007-2013 GMC Sierra 1500 WT 2010-2013 GMC Sierra 1500 XFE 2007 GMC Sierra 1500 Classic Denali 2007 GMC Sierra 1500 Classic Hybrid 2007 GMC Sierra 1500 Classic SL 2007 GMC Sierra 1500 Classic SLE 2007 GMC Sierra 1500 Classic SLT 2007 GMC Sierra 1500 Classic WT 2007 GMC Sierra 1500 HD Classic SLE 2007 GMC Sierra 1500 HD Classic SLT

This system offers a mild lift height with easy installation for clearance of 33 tall tires on 2014 C/K1500s w/ factory Steel suspension. Lift is accomplished by utilizing the factory front Coilover shocks with steel spacer system that helps retain the stock ride of the front suspension. The stock upper control arms are replaced with high quality tubular Uniball arms that allow unrestricted movement throughout the travel range. The arms are constructed of top quality material including .120 wall 4130 Chromoly tubing with a 1.50 OD and 1 FK Stainless PTFE Uniballs. These arms are the best on the market for aggressive offroad driving in harsh conditions. The front differential is relocated to keep CV angles proper with the new lift height while a 1/4 thick steel skid plate provides protection against offroad obstacles. Rear lift is accomplished with 1 1/2 rear lift block and u-bolts to help level the stance of the vehicles. Performance rear shock absorbers replace the stock units for increased damping.This Part Fits: Year Make Model Submodel 2016-2018 Chevrolet Silverado 1500 Custom 2014-2018 Chevrolet Silverado 1500 High Country 2009-2013 Chevrolet Silverado 1500 Hybrid 2007-2013,2015-2018 Chevrolet Silverado 1500 LS 2007-2018 Chevrolet Silverado 1500 LT 2007-2018 Chevrolet Silverado 1500 LTZ 2015-2018 Chevrolet Silverado 1500 SSV 2007-2018 Chevrolet Silverado 1500 WT 2010-2013 Chevrolet Silverado 1500 XFE 2014-2018 GMC Sierra 1500 Base 2007-2018 GMC Sierra 1500 Denali 2009-2013 GMC Sierra 1500 Hybrid 2007-2013 GMC Sierra 1500 SL 2007-2018 GMC Sierra 1500 SLE 2007-2018 GMC Sierra 1500 SLT 2007-2013 GMC Sierra 1500 WT 2010-2013 GMC Sierra 1500 XFE

This system offers a mild lift height with easy installation for clearance of 33 tall tires on 2014 C/K1500s w/ factory Steel suspension. Lift is accomplished by utilizing the factory front Coilover shocks with steel spacer system that helps retain the stock ride of the front suspension. The stock upper control arms are replaced with high quality tubular Uniball arms that allow unrestricted movement throughout the travel range. The arms are constructed of top quality material including .120 wall 4130 Chromoly tubing with a 1.50 OD and 1 FK Stainless PTFE Uniballs. These arms are the best on the market for aggressive offroad driving in harsh conditions. The front differential is relocated to keep CV angles proper with the new lift height while a 1/4 thick steel skid plate provides protection against offroad obstacles. Rear lift is accomplished with 1 1/2 rear lift block and u-bolts to help level the stance of the vehicles. Performance rear shock absorbers replace the stock units for increased damping.This Part Fits: Year Make Model Submodel 2016-2018 Chevrolet Silverado 1500 Custom 2014-2018 Chevrolet Silverado 1500 High Country 2009-2013 Chevrolet Silverado 1500 Hybrid 2007-2013,2015-2018 Chevrolet Silverado 1500 LS 2007-2018 Chevrolet Silverado 1500 LT 2007-2018 Chevrolet Silverado 1500 LTZ 2015-2018 Chevrolet Silverado 1500 SSV 2007-2018 Chevrolet Silverado 1500 WT 2010-2013 Chevrolet Silverado 1500 XFE 2014-2018 GMC Sierra 1500 Base 2007-2018 GMC Sierra 1500 Denali 2009-2013 GMC Sierra 1500 Hybrid 2007-2013 GMC Sierra 1500 SL 2007-2018 GMC Sierra 1500 SLE 2007-2018 GMC Sierra 1500 SLT 2007-2013 GMC Sierra 1500 WT 2010-2013 GMC Sierra 1500 XFE

Arms eliminate upper ball joint w/ super strong 1" ID Stainless American Uniball - Additional caster is built into Arms for greater align ability to help with problematic leveling kit alignments - Allows for increased wheel travel when used with Dirt Logic 2.5 Coilover shocks - Chromoly tubing reduces flex found in stock arms for more positive road feel - 17-4 Stainless Steel Heat treated Uniball pin fits into factory ball joint taper without modification to the spindle for easy return to stock feature - Arms are direct replacements for factory arms on suspensions that require additional strength and align ability. Material Construction Specs. - Built with same materials as found on Trophy Trucks - .120" Wall 4130 Chromoly Tubing. 1.50" OD. - .250" wall DOM Bushing Barrels - 1" ID Stainless Steel American Uniball - 17-4 Stainless Misalignments - Heat Treated 17-4 Stainless Steel Tapered Uniball Pins.This Part Fits: Year Make Model Submodel 2016-2018 Chevrolet Silverado 1500 Custom 2014-2018 Chevrolet Silverado 1500 High Country 2009-2013 Chevrolet Silverado 1500 Hybrid 2008-2013,2015-2018 Chevrolet Silverado 1500 LS 2007-2018 Chevrolet Silverado 1500 LT 2007-2018 Chevrolet Silverado 1500 LTZ 2015-2018 Chevrolet Silverado 1500 SSV 2007-2018 Chevrolet Silverado 1500 WT 2010-2013 Chevrolet Silverado 1500 XFE 2014-2018 GMC Sierra 1500 Base 2011-2013,2015-2018 GMC Sierra 1500 Denali 2009-2013 GMC Sierra 1500 Hybrid 2008-2013 GMC Sierra 1500 SL 2007-2018 GMC Sierra 1500 SLE 2007-2018 GMC Sierra 1500 SLT 2007-2013 GMC Sierra 1500 WT 2010-2013 GMC Sierra 1500 XFE

The 4" Budget System for GM C/K1500 SUV's provides a mild lift height with a supple ride for use with 33" tall tires for the value minded enthusiast. Fabtech's replacement DOM upper tubular control arms feature heavy duty extended range ball joints that provide additional strength to the front suspension. The new ball joints provide unrestricted movement throughout the suspension travel range for smooth operation. On 4WD models the front differential housing is relocated to keep CV angles proper with the new ride height while a 1/4" thick steel skid plate protects the front diff. The rear lift comes from a 1 1/2" Coil Spacer system. For increased damping this system comes with high end Dirt Logic 2.5 Coilovers for the front and Dirt Logic 2.25 shocks on the rear.This Part Fits: Year Make Model Submodel 2013 Chevrolet Avalanche Black Diamond LS 2013 Chevrolet Avalanche Black Diamond LT 2013 Chevrolet Avalanche Black Diamond LTZ 2007-2012 Chevrolet Avalanche LS 2007-2012 Chevrolet Avalanche LT 2007-2012 Chevrolet Avalanche LTZ 2007-2014 Chevrolet Suburban 1500 LS 2007-2014 Chevrolet Suburban 1500 LT 2007-2014 Chevrolet Suburban 1500 LTZ 2008-2013 Chevrolet Tahoe Hybrid 2007-2014 Chevrolet Tahoe LS 2007-2014 Chevrolet Tahoe LT 2007-2014 Chevrolet Tahoe LTZ 2012-2014 Chevrolet Tahoe PPV 2012-2014 Chevrolet Tahoe SSV 2007-2014 GMC Yukon Denali 2010-2013 GMC Yukon Denali Hybrid 2008-2013 GMC Yukon Hybrid 2007-2014 GMC Yukon SLE 2007-2014 GMC Yukon SLT 2007-2014 GMC Yukon XL 1500 Denali 2007-2014 GMC Yukon XL 1500 SLE 2007-2014 GMC Yukon XL 1500 SLT

Designed for the value minded enthusiast, the 4" Budget System for 2007-13 GM C/K1500's provides a mild lift height with a supple ride for use with 33" tall tires. Fabtech's replacement DOM upper tubular control arms feature heavy duty extended range ball joints that provide additional strength to the front suspension. The new ball joints provide unrestricted movement throughout the suspension travel range for smooth operation. The front differential housing is relocated to keep CV angles proper with the new ride height while a 1/4" thick steel skid plate protects the front diff. The rear lift comes from a 1 1/2" lift block and u bolt system. The 4" Budget is available with two shock configurations. One utilizes the stock front Coilover shocks with upper spacers along and rear Performance Shocks. The second option for increased damping is the high end Dirt Logic 2.5 Coilovers for the front and Dirt Logic 2.25 shocks on the rear.This Part Fits: Year Make Model Submodel 2016-2018 Chevrolet Silverado 1500 Custom 2014-2018 Chevrolet Silverado 1500 High Country 2009-2013 Chevrolet Silverado 1500 Hybrid 2007-2013,2015-2018 Chevrolet Silverado 1500 LS 2007-2018 Chevrolet Silverado 1500 LT 2007-2018 Chevrolet Silverado 1500 LTZ 2015-2018 Chevrolet Silverado 1500 SSV 2007-2018 Chevrolet Silverado 1500 WT 2010-2013 Chevrolet Silverado 1500 XFE 2007 Chevrolet Silverado 1500 Classic Hybrid 2007 Chevrolet Silverado 1500 Classic LS 2007 Chevrolet Silverado 1500 Classic LT 2007 Chevrolet Silverado 1500 Classic SS 2007 Chevrolet Silverado 1500 Classic WT 2007 Chevrolet Silverado 1500 HD Classic LT 2014-2018 GMC Sierra 1500 Base 2007-2018 GMC Sierra 1500 Denali 2009-2013 GMC Sierra 1500 Hybrid 2007-2013 GMC Sierra 1500 SL 2007-2018 GMC Sierra 1500 SLE 2007-2018 GMC Sierra 1500 SLT 2007-2013 GMC Sierra 1500 WT 2010-2013 GMC Sierra 1500 XFE 2007 GMC Sierra 1500 Classic Denali 2007 GMC Sierra 1500 Classic Hybrid 2007 GMC Sierra 1500 Classic SL 2007 GMC Sierra 1500 Classic SLE 2007 GMC Sierra 1500 Classic SLT 2007 GMC Sierra 1500 Classic WT 2007 GMC Sierra 1500 HD Classic SLE 2007 GMC Sierra 1500 HD Classic SLT

Our 4 Ultimate System provides less lift than our 6 RTS(TM) system but still allows use of 33 or 35 tall tires with cutting for street and offroad use. We have developed this system utilizing replacement upper control arms constructed of 1.50 OD .120 thick wall DOM tubing that attaches to heavy duty Fabtech ductile iron steering knuckles. The factory torsion bars remain in the stock position and use new forged adjusting keys to provide the proper amount of lift. There is no loss of ground clearance with this system as the stock lower control arms, torsion bars and front differential do not need to be relocated. This 4 Ultimate System will level the stance of the vehicle compared to the factory nose down rake with no change to the rear suspension. For those customers that require a factory nose down appearance an optional 1 rear block kit is available (2500HD Part # FTS21110) (3500HD Part # FTS21111).This Part Fits: Year Make Model Submodel 2015-2019 Chevrolet Silverado 2500 HD High Country 2011-2019 Chevrolet Silverado 2500 HD LT 2011-2019 Chevrolet Silverado 2500 HD LTZ 2011-2019 Chevrolet Silverado 2500 HD WT 2015-2019 Chevrolet Silverado 3500 HD High Country 2011-2019 Chevrolet Silverado 3500 HD LT 2011-2019 Chevrolet Silverado 3500 HD LTZ 2011-2019 Chevrolet Silverado 3500 HD WT 2015-2019 GMC Sierra 2500 HD Base 2011-2019 GMC Sierra 2500 HD Denali 2011-2019 GMC Sierra 2500 HD SLE 2011-2019 GMC Sierra 2500 HD SLT 2011-2014 GMC Sierra 2500 HD WT 2015-2019 GMC Sierra 3500 HD Base 2011-2019 GMC Sierra 3500 HD Denali 2011-2019 GMC Sierra 3500 HD SLE 2011-2019 GMC Sierra 3500 HD SLT 2011-2014 GMC Sierra 3500 HD WT

Fabtechs development capabilities are second to none with over 20 years of experience in aftermarket suspension design. State of the art software, fabrication equipment along with our seasoned engineers and fabricators allow the company to develop products that are constantly on the cutting edge. Fabtech has received numerous awards for our designs that continue to lead the market. Proper design in suspension development is key in providing a quality, trouble free product to the end consumer. Fabtech leads the industry with extensive research, design technology and rigorous testing that results in the highest performing, finest quality suspension system for the discerning offroad enthusiast.This Part Fits: Year Make Model Submodel 2015-2019 Chevrolet Silverado 2500 HD High Country 2011-2019 Chevrolet Silverado 2500 HD LT 2011-2019 Chevrolet Silverado 2500 HD LTZ 2011-2019 Chevrolet Silverado 2500 HD WT 2015-2019 Chevrolet Silverado 3500 HD High Country 2011-2019 Chevrolet Silverado 3500 HD LT 2011-2019 Chevrolet Silverado 3500 HD LTZ 2011-2019 Chevrolet Silverado 3500 HD WT 2015-2019 GMC Sierra 2500 HD Base 2011-2019 GMC Sierra 2500 HD Denali 2011-2019 GMC Sierra 2500 HD SLE 2011-2019 GMC Sierra 2500 HD SLT 2011-2014 GMC Sierra 2500 HD WT 2015-2019 GMC Sierra 3500 HD Base 2011-2019 GMC Sierra 3500 HD Denali 2011-2019 GMC Sierra 3500 HD SLE 2011-2019 GMC Sierra 3500 HD SLT 2011-2014 GMC Sierra 3500 HD WT

The 4 Budget System utilizes the factory front coil springs with a steel upper spacer providing 4 of lift. Radius Arm drop brackets retain the factory arms with correct caster setting for the increase ride height. System includes a Trac Bar relocation bracket that has been designed to center the axle under the vehicle and still works properly with the factory Pitman Arm. This eliminates the need to replace the Pitman Arm resulting in a lower cost and faster installation time. Rear lift is accomplished with lift blocks and extended length u-bolts. System allows installation of 35 tall tires with required inner fenderwell trimming for adequate tire clearance for street driving and light offroad use.This Part Fits: Year Make Model Submodel 2015-2019 Chevrolet Silverado 2500 HD High Country 2011-2019 Chevrolet Silverado 2500 HD LT 2011-2019 Chevrolet Silverado 2500 HD LTZ 2011-2019 Chevrolet Silverado 2500 HD WT 2015-2019 Chevrolet Silverado 3500 HD High Country 2011-2019 Chevrolet Silverado 3500 HD LT 2011-2019 Chevrolet Silverado 3500 HD LTZ 2011-2019 Chevrolet Silverado 3500 HD WT 2015-2019 GMC Sierra 2500 HD Base 2011-2019 GMC Sierra 2500 HD Denali 2011-2019 GMC Sierra 2500 HD SLE 2011-2019 GMC Sierra 2500 HD SLT 2011-2014 GMC Sierra 2500 HD WT 2015-2019 GMC Sierra 3500 HD Base 2011-2019 GMC Sierra 3500 HD Denali 2011-2019 GMC Sierra 3500 HD SLE 2011-2019 GMC Sierra 3500 HD SLT 2011-2014 GMC Sierra 3500 HD WT

Fabtechs cutting edge RTS(TM) system has now been developed for the all new GM HD platform. The 6 RTS(TM) utilizes a patent pending bracket system that keep the torsion bars raised up, in the stock location. This feature provides superior ground clearance at the frame as there are no torsion bars hanging down to become high centered on or damaged when offroading.. The 6 RTS(TM) system has been designed with unitized bracketry to retain the four front compression stops of the vehicle as GM intended. This distributes impact loads across a wide section of the frame rather than at a single point.High arched crossmembers and front differential skid plate are constructed of 1/4 thick steel to resist bending from hard front suspension impacts. Only 1/4 thick steel provides the rigidity and strength necessary to relocate the torsion bars, bump stops and lower control arms properly. Minimal heavy duty bracketry allow for a fast installation time with only two holes to drill and no cutting of the front diff housing. The 6 RTS(TM) system allows the use of both 18 and 20 diameter wheels.This Part Fits: Year Make Model Submodel 2015-2018 Chevrolet Silverado 2500 HD High Country 2014-2018 Chevrolet Silverado 2500 HD LT 2014-2018 Chevrolet Silverado 2500 HD LTZ 2014-2018 Chevrolet Silverado 2500 HD WT 2015-2019 Chevrolet Silverado 3500 HD High Country 2011-2019 Chevrolet Silverado 3500 HD LT 2011-2019 Chevrolet Silverado 3500 HD LTZ 2011-2019 Chevrolet Silverado 3500 HD WT 2015-2018 GMC Sierra 2500 HD Base 2014-2018 GMC Sierra 2500 HD Denali 2014-2018 GMC Sierra 2500 HD SLE 2014-2018 GMC Sierra 2500 HD SLT 2014 GMC Sierra 2500 HD WT 2015-2018 GMC Sierra 3500 HD Base 2011-2018 GMC Sierra 3500 HD Denali 2011-2018 GMC Sierra 3500 HD SLE 2011-2018 GMC Sierra 3500 HD SLT 2011-2014 GMC Sierra 3500 HD WT

Fabtechs cutting edge RTS(TM) system has now been developed for the all new GM HD platform. The 6 RTS(TM) utilizes a patent pending bracket system that keep the torsion bars raised up, in the stock location. This feature provides superior ground clearance at the frame as there are no torsion bars hanging down to become high centered on or damaged when offroading.. The 6 RTS(TM) system has been designed with unitized bracketry to retain the four front compression stops of the vehicle as GM intended. This distributes impact loads across a wide section of the frame rather than at a single point.High arched crossmembers and front differential skid plate are constructed of 1/4 thick steel to resist bending from hard front suspension impacts. Only 1/4 thick steel provides the rigidity and strength necessary to relocate the torsion bars, bump stops and lower control arms properly. Minimal heavy duty bracketry allow for a fast installation time with only two holes to drill and no cutting of the front diff housing. The 6 RTS(TM) system allows the use of both 18 and 20 diameter wheels.This Part Fits: Year Make Model Submodel 2015-2018 Chevrolet Silverado 2500 HD High Country 2014-2018 Chevrolet Silverado 2500 HD LT 2014-2018 Chevrolet Silverado 2500 HD LTZ 2014-2018 Chevrolet Silverado 2500 HD WT 2015-2019 Chevrolet Silverado 3500 HD High Country 2011-2019 Chevrolet Silverado 3500 HD LT 2011-2019 Chevrolet Silverado 3500 HD LTZ 2011-2019 Chevrolet Silverado 3500 HD WT 2015-2018 GMC Sierra 2500 HD Base 2014-2018 GMC Sierra 2500 HD Denali 2014-2018 GMC Sierra 2500 HD SLE 2014-2018 GMC Sierra 2500 HD SLT 2014 GMC Sierra 2500 HD WT 2015-2018 GMC Sierra 3500 HD Base 2011-2018 GMC Sierra 3500 HD Denali 2011-2018 GMC Sierra 3500 HD SLE 2011-2018 GMC Sierra 3500 HD SLT 2011-2014 GMC Sierra 3500 HD WT

Fabtechs cutting edge RTS(TM) system has now been developed for the all new GM HD platform. The 6 RTS(TM) utilizes a patent pending bracket system that keep the torsion bars raised up, in the stock location. This feature provides superior ground clearance at the frame as there are no torsion bars hanging down to become high centered on or damaged when offroading.. The 6 RTS(TM) system has been designed with unitized bracketry to retain the four front compression stops of the vehicle as GM intended. This distributes impact loads across a wide section of the frame rather than at a single point.High arched crossmembers and front differential skid plate are constructed of 1/4 thick steel to resist bending from hard front suspension impacts. Only 1/4 thick steel provides the rigidity and strength necessary to relocate the torsion bars, bump stops and lower control arms properly. Minimal heavy duty bracketry allow for a fast installation time with only two holes to drill and no cutting of the front diff housing. The 6 RTS(TM) system allows the use of both 18 and 20 diameter wheels.This Part Fits: Year Make Model Submodel 2015-2018 Chevrolet Silverado 2500 HD High Country 2014-2018 Chevrolet Silverado 2500 HD LT 2014-2018 Chevrolet Silverado 2500 HD LTZ 2014-2018 Chevrolet Silverado 2500 HD WT 2015-2019 Chevrolet Silverado 3500 HD High Country 2011-2019 Chevrolet Silverado 3500 HD LT 2011-2019 Chevrolet Silverado 3500 HD LTZ 2011-2019 Chevrolet Silverado 3500 HD WT 2015-2018 GMC Sierra 2500 HD Base 2014-2018 GMC Sierra 2500 HD Denali 2014-2018 GMC Sierra 2500 HD SLE 2014-2018 GMC Sierra 2500 HD SLT 2014 GMC Sierra 2500 HD WT 2015-2018 GMC Sierra 3500 HD Base 2011-2018 GMC Sierra 3500 HD Denali 2011-2018 GMC Sierra 3500 HD SLE 2011-2018 GMC Sierra 3500 HD SLT 2011-2014 GMC Sierra 3500 HD WT

Fabtechs cutting edge RTS(TM) system has now been developed for the all new GM HD platform. The 6 RTS(TM) utilizes a patent pending bracket system that keep the torsion bars raised up, in the stock location. This feature provides superior ground clearance at the frame as there are no torsion bars hanging down to become high centered on or damaged when offroading.. The 6 RTS(TM) system has been designed with unitized bracketry to retain the four front compression stops of the vehicle as GM intended. This distributes impact loads across a wide section of the frame rather than at a single point.High arched crossmembers and front differential skid plate are constructed of 1/4 thick steel to resist bending from hard front suspension impacts. Only 1/4 thick steel provides the rigidity and strength necessary to relocate the torsion bars, bump stops and lower control arms properly. Minimal heavy duty bracketry allow for a fast installation time with only two holes to drill and no cutting of the front diff housing. The 6 RTS(TM) system allows the use of both 18 and 20 diameter wheels.This Part Fits: Year Make Model Submodel 2015-2017 Chevrolet Silverado 2500 HD High Country 2011-2017 Chevrolet Silverado 2500 HD LT 2011-2017 Chevrolet Silverado 2500 HD LTZ 2011-2017 Chevrolet Silverado 2500 HD WT 2015-2016 Chevrolet Silverado 3500 HD High Country 2014-2016 Chevrolet Silverado 3500 HD LT 2014-2016 Chevrolet Silverado 3500 HD LTZ 2014-2016 Chevrolet Silverado 3500 HD WT 2015-2019 GMC Sierra 2500 HD Base 2011-2019 GMC Sierra 2500 HD Denali 2011-2019 GMC Sierra 2500 HD SLE 2011-2019 GMC Sierra 2500 HD SLT 2011-2014 GMC Sierra 2500 HD WT 2015-2016,2019 GMC Sierra 3500 HD Base 2014-2016 GMC Sierra 3500 HD Denali 2014-2016 GMC Sierra 3500 HD SLE 2014-2016 GMC Sierra 3500 HD SLT 2014 GMC Sierra 3500 HD WT

Fabtechs cutting edge RTS(TM) system has now been developed for the all new GM HD platform. The 6 RTS(TM) utilizes a patent pending bracket system that keep the torsion bars raised up, in the stock location. This feature provides superior ground clearance at the frame as there are no torsion bars hanging down to become high centered on or damaged when offroading.. The 6 RTS(TM) system has been designed with unitized bracketry to retain the four front compression stops of the vehicle as GM intended. This distributes impact loads across a wide section of the frame rather than at a single point.High arched crossmembers and front differential skid plate are constructed of 1/4 thick steel to resist bending from hard front suspension impacts. Only 1/4 thick steel provides the rigidity and strength necessary to relocate the torsion bars, bump stops and lower control arms properly. Minimal heavy duty bracketry allow for a fast installation time with only two holes to drill and no cutting of the front diff housing. The 6 RTS(TM) system allows the use of both 18 and 20 diameter wheels.This Part Fits: Year Make Model Submodel 2015-2018 Chevrolet Silverado 2500 HD High Country 2011-2018 Chevrolet Silverado 2500 HD LT 2011-2018 Chevrolet Silverado 2500 HD LTZ 2011-2018 Chevrolet Silverado 2500 HD WT 2015-2016,2018 Chevrolet Silverado 3500 HD High Country 2014-2016,2018 Chevrolet Silverado 3500 HD LT 2014-2016,2018 Chevrolet Silverado 3500 HD LTZ 2014-2016,2018 Chevrolet Silverado 3500 HD WT 2015-2019 GMC Sierra 2500 HD Base 2011-2019 GMC Sierra 2500 HD Denali 2011-2019 GMC Sierra 2500 HD SLE 2011-2019 GMC Sierra 2500 HD SLT 2011-2014 GMC Sierra 2500 HD WT 2015-2016,2018-2019 GMC Sierra 3500 HD Base 2014-2016,2018 GMC Sierra 3500 HD Denali 2014-2016,2018 GMC Sierra 3500 HD SLE 2014-2016,2018 GMC Sierra 3500 HD SLT 2014 GMC Sierra 3500 HD WT