This Super Duty lift kit is perfect for the enthusiast looking to run oversized tires and wants additional wheel travel for offroad use. With the large Super Duty wheelwell openings and this quality 2.5in lift kit, you can run 35in tall tires with ease. Fabtech's coil springs retain the factory load carrying capacity while providing increased suspension travel. The coil springs and associated bracketry allow for an additional inch of compression travel over stock without binding the suspension. This extra travel helps when offroading in rugged terrain. Sway bar drop brackets are included to reposition the front bar so that the link ends do not go over center at full droop and cause bind. The brake lines are relocated down on the frame with extension brackets to eliminate the possibility of overstretching the lines throughout the new travel range. Fabtech provides extension brackets rather than longer brake lines to keep the factory brake system sealed for fast and trouble-free installation. This suspension kit utilizes the factory bump stops without extensions. This allows for more travel with the Fabtech coil springs and components. To help keep the factory alignment specifications of the vehicle, Fabtech includes 2 degree adjustable alignment ball joint inserts. They help retain the factory caster specifications for optimum driveability. After a Super Duty is lifted the front axle is pushed to one side due to the length of the track bar. To address this issue Fabtech provides a heavy-duty adjustable track bar. The Fabtech track bar allows for on the vehicle adjustment to center the axle under the vehicle. This provides proper tracking of the front and rear axle for excellent highway manners. This Super Duty lift kit retains the factory shocks with heavy duty shock extension brackets for a stock like ride. With the installation of this 2.5in lift the vehicle's stance front to rear will be nearly flat compared to the factory nose-down appearance. For owners that wan Additional Attributes: GTIN: 00674866110182 Extened Information: Life Cycle Status: Available To Order Packaging: Quantity of Each: 1 Package UOM: EA Dimension: 23 x 12 x 12 inches

This Super Duty lift kit is perfect for the enthusiast looking to run oversized tires and wants additional wheel travel for offroad use. With the large Super Duty wheelwell openings and this quality 2.5in lift kit, you can run 35in tall tires with ease. Fabtech's coil springs retain the factory load carrying capacity while providing increased suspension travel. The coil springs and associated bracketry allow for an additional inch of compression travel over stock without binding the suspension. This extra travel helps when offroading in rugged terrain. Sway bar drop brackets are included to reposition the front bar so that the link ends do not go over center at full droop and cause bind. The brake lines are relocated down on the frame with extension brackets to eliminate the possibility of overstretching the lines throughout the new travel range. Fabtech provides extension brackets rather than longer brake lines to keep the factory brake system sealed for fast and trouble-free installation. This suspension kit utilizes the factory bump stops without extensions. This allows for more travel with the Fabtech coil springs and components. Typically, once a Super Duty is lifted the front axle is pushed to one side due to the length of the track bar and the location. To address this issue Fabtech provides a heavy-duty 1/4in thick steel Track Bar mount. It repositions the track bar and front axle under the vehicle to the factory specifications. This provides proper tracking of the front and rear axle for excellent highway manners. This Super Duty lift kit retains the factory shocks with heavy duty shock extension brackets for a stock like ride. With the installation of this 2.5in lift the vehicle's stance front to rear will be nearly flat compared to the factory nose-down appearance. For owners that want to retain more of the factory nose-down appearance, Fabtech offers an optional 4in rear block kit (FTS22214). The 4in blocks replace the factory 2.5in blocks and will provi Additional Attributes: GTIN: 00674866110175 Extened Information: Life Cycle Status: Available To Order Packaging: Quantity of Each: 1 Package UOM: EA Dimension: 22.2 x 16 x 15.7 inches

This Super Duty lift kit is perfect for the enthusiast looking to run oversized tires and wants additional wheel travel for offroad use. With the large Super Duty wheelwell openings and this quality 2.5in lift kit, you can run 35in tall tires with ease. Fabtech's coil springs retain the factory load carrying capacity while providing increased suspension travel. The coil springs and associated bracketry allow for an additional inch of compression travel over stock without binding the suspension. This extra travel helps when offroading in rugged terrain. Sway bar drop brackets are included to reposition the front bar so that the link ends do not go over center at full droop and cause bind. The brake lines are relocated down on the frame with extension brackets to eliminate the possibility of overstretching the lines throughout the new travel range. Fabtech provides extension brackets rather than longer brake lines to keep the factory brake system sealed for fast and trouble-free installation. This suspension kit utilizes the factory bump stops without extensions. This allows for more travel with the Fabtech coil springs and components. Typically, once a Super Duty is lifted the front axle is pushed to one side due to the length of the track bar and the location. To address this issue Fabtech provides a heavy-duty 1/4in thick steel Track Bar mount. It repositions the track bar and front axle under the vehicle to the factory specifications. This provides proper tracking of the front and rear axle for excellent highway manners. This Super Duty lift kit includes Fabtech Stealth shocks. They are a sealed monotube shock that has a Nitrocarb piston rod for corrosion resistance and resist rock chipping. They will provide a great highway ride with good offroad damping capacity. With the installation of this 2.5in lift the vehicle's stance front to rear will be nearly flat compared to the factory nose-down appearance. For owners that want to retain more of the factory nose-down Additional Attributes: GTIN: 00674866110137 Extened Information: Life Cycle Status: Available To Order Packaging: Quantity of Each: 1 Package UOM: EA Dimension: 24 x 23.52 x 15.7 inches

This Super Duty lift kit is perfect for the enthusiast looking to run oversized tires and wants additional wheel travel for offroad use. With the large Super Duty wheelwell openings and this quality 2.5in lift kit, you can run 35in tall tires with ease. Fabtech's coil springs retain the factory load carrying capacity while providing increased suspension travel. The coil springs and associated bracketry allow for an additional inch of compression travel over stock without binding the suspension. This extra travel helps when offroading in rugged terrain. Sway bar drop brackets are included to reposition the front bar so that the link ends do not go over center at full droop and cause bind. The brake lines are relocated down on the frame with extension brackets to eliminate the possibility of overstretching the lines throughout the new travel range. Fabtech provides extension brackets rather than longer brake lines to keep the factory brake system sealed for fast and trouble-free installation. This suspension kit utilizes the factory bump stops without extensions. This allows for more travel with the Fabtech coil springs and components. Typically, once a Super Duty is lifted the front axle is pushed to one side due to the length of the track bar and the location. To address this issue Fabtech provides a heavy-duty 1/4in thick steel Track Bar mount. It repositions the track bar and front axle under the vehicle to the factory specifications. This provides proper tracking of the front and rear axle for excellent highway manners. This Super Duty lift kit includes Fabtech Performance shocks. They are a twin tube shock that will provide a good highway ride with the ability to tackle offroad. With the installation of this 2.5in lift the vehicle's stance front to rear will be nearly flat compared to the factory nose-down appearance. For owners that want to retain more of the factory nose-down appearance, Fabtech offers an optional 4in rear block kit (FTS22214). The 4in blocks Additional Attributes: GTIN: 00674866110120 Extened Information: Life Cycle Status: Available To Order Packaging: Quantity of Each: 1 Package UOM: EA Dimension: 24 x 23.52 x 15.7 inches

We offer front Dual Shock systems for the 1999-04 Super Duty. The front system attaches to the factory coil bucket and relocates the sway bar with billet end links and heims for proper shock clearances. Additional Attributes: GTIN: 00674866092013 Extened Information: Life Cycle Status: Available To Order Packaging: Quantity of Each: 1 Package UOM: EA Dimension: 24 x 18.52 x 12.52 inches

We offer front Dual Shock systems for the 1999-04 Super Duty. The front system attaches to the factory coil bucket and relocates the sway bar with billet end links and heims for proper shock clearances. Additional Attributes: GTIN: 00674866025875 Extened Information: Life Cycle Status: Available To Order Packaging: Quantity of Each: 1 Package UOM: EA Dimension: 24 x 18.52 x 12.52 inches

We offer front Dual Shock systems for the 1999-04 Super Duty. The front system attaches to the factory coil bucket and relocates the sway bar with billet end links and heims for proper shock clearances. Additional Attributes: GTIN: 00674866025851 Extened Information: Life Cycle Status: Available To Order Packaging: Quantity of Each: 1 Package UOM: EA Dimension: 24 x 18.52 x 12.52 inches

Obtain 3.5'' of front end lift without changing the front leaf springs. The super stout spring hangers replace the factory units without welding or cutting. Additional Attributes: GTIN: 00674866024434 Extened Information: Life Cycle Status: Available To Order Packaging: Quantity of Each: 1 Package UOM: EA Dimension: 24 x 18.52 x 15.5 inches

This high quality GM 2500HD lift kit offers an increased ride height for enthusiasts looking to run a 35in tall tire with enhanced offroad capabilities. The stance of the vehicle will become more level front to rear for an aggressive look. The factory GM upper control arms are replaced with Fabtech's heavy duty ball joint tubular arms. They are constructed with 1.50in OD DOM steel tubing and feature a high travel ball joint that is sizably larger than stock. This provides for increased strength both on and offroad. Fabtech sets the ball joint angle to allow for full travel without bind throughout the travel range. Fabtech's forged torsion bar keys replace the factory units and allow for additional ride height adjustment to work in conjunction with the new upper control arms. Fabtech offers their Performance shocks with this suspension. They are a twin tube shock that will provide a good highway ride with the ability to tackle offroad. This 3.5in HD lift kit comes with high quality components that add strength and reliability to the vehicle while giving it a commanding presence. Tubular Steel Upper Control Arms. Additional 1 degree of caster built in. 1.5in OD x .120in wall DOM tubing. High travel oversized ball joint. 2.25in OD x .250in wall DOM bushing barrels. Heavy duty forged torsion bar keys. Additional Attributes: GTIN: 00674866110205 Extened Information: Life Cycle Status: Available To Order Packaging: Quantity of Each: 1 Package UOM: EA Dimension: 29 x 16.26 x 15 inches

Designed specifically for Trail Boss and AT4 owners that want a little more ride height out of their truck for clearance of full size 33/1250R 18 inch or 20 inch tires, this lift kit is the ticket. Fabtech's Upper Control Arm lift kit provides a 1.5in increased ride height on Trail Boss and AT4 models without creating suspension bind at full droop. These vehicles have a factory 2in lift. With the addition of this 1.5in lift kit, the vehicle will sit as high as a standard model with a 3.5in lift kit and clear a 33in tall tire. Lift is accomplished with an aluminum spacer at the top and a small preload spacer under the coil of the factory Coilover shock. This positions the Coilover properly to provide height without coil bind or over extending the travel that can lead to damaged suspension parts in the future. The tubular Upper Control Arms with heavy duty ball joints address the geometry of the front suspension with the new ride height for proper alignablity. Due to the new GM suspension geometry of the 2019, there are no differential drop brackets required for the CV axles to operate properly. Rear lift comes from 1in blocks and u bolts. Some owners may opt to not install the rear blocks if they desire to level the stance of the vehicle. The Stealth rear shocks are a monotube design that have a Nitrocarb piston rod for corrosion resistance and resist rock chipping. They'll provide a great highway ride with good offroad damping capacity. FEATURES: Increased ground clearance, Extended range upper ball joints provide a smooth quiet ride, Increased fender clearance for 33in tall tires, Suspension can be restored to stock, Easy installation. Additional Attributes: GTIN: 00674866108875 Extened Information: Life Cycle Status: Available To Order Packaging: Quantity of Each: 1 Package UOM: EA Dimension: 24 x 13.26 x 12.5 inches

Designed specifically for Trail Boss and AT4 owners that want a little more ride height out of their truck for clearance of full size 33/1250R 18 inch or 20 inch tires, this lift kit is the ticket. Fabtech's Upper Control Arm lift kit provides a 1.5in increased ride height on Trail Boss and AT4 models without creating suspension bind at full droop. These vehicles have a factory 2in lift. With the addition of this 1.5in lift kit, the vehicle will sit as high as a standard model with a 3.5in lift kit and clear a 33in tall tire. Lift is accomplished with an aluminum spacer at the top and a small preload spacer under the coil of the factory Coilover shock. This positions the Coilover properly to provide height without coil bind or over extending the travel that can lead to damaged suspension parts in the future. The tubular Upper Control Arms with heavy duty ball joints address the geometry of the front suspension with the new ride height for proper alignablity. Due to the new GM suspension geometry of the 2019, there are no differential drop brackets required for the CV axles to operate properly. Rear lift comes from 1in blocks and u bolts. Some owners may opt to not install the rear blocks if they desire to level the stance of the vehicle. The Performance rear shocks are a twin tube design provide a good highway ride with the ability to handle offroad use. FEATURES: Increased ground clearance, Extended range upper ball joints provide a smooth quiet ride, Increased fender clearance for 33in tall tires, Suspension can be restored to stock, Easy installation. Additional Attributes: GTIN: 00674866108868 Extened Information: Life Cycle Status: Available To Order Packaging: Quantity of Each: 1 Package UOM: EA Dimension: 24 x 13.26 x 12.5 inches

Fabtech's Upper Control Arm system provides a 3.5in increased ride height over stock without creating suspension bind at full droop. Lift is accomplished with steel spacers that utilizes the factory Adaptive Ride Control coilovers. The replacement Upper Control Arms address the geometry of the front suspension with the new ride height for proper alignablity. Heavy duty ball joints allow for extended travel to eliminate binding. Rear lift comes from 1.5in blocks and u-bolts. Heavy duty rear shock extension brackets retain the factory Adaptive Ride Control shocks for an outstanding ride quality. Features value priced system with Fabtech quality, increased ground clearance, extended range upper ball joints provide a smooth quiet ride, increased fender clearance compared to a Leveling Kit for 33in tall tires, suspension can be restored to stock, easy installation. Additional Attributes: GTIN: 00674866107496 Extened Information: Life Cycle Status: Available To Order Packaging: Quantity of Each: 1 Package UOM: EA Dimension: 23.5 x 11.8 x 12.5 inches

This quality Upper Control Arm system provides a 3.5in increased ride height over stock without creating suspension bind at full droop. Lift is accomplished with spacers that utilizes the factory coilover shocks for a stock ride. The Fabtech Upper Control Arms address the geometry of the front suspension with the new ride height for proper align-ability. Heavy duty ball joints allow for extended travel to eliminate binding. Due to the GM suspension geometry there are no differential drop brackets required for the CV axles to operate properly. Rear lift comes from 1in blocks and u-bolts. Value priced system with Fabtech quality. Increased ground clearance. Extended range upper ball joints provide a smooth quiet ride. Increased fender clearance compared to a Leveling Kit for 33in tall tires. Suspension can be restored to stock. Easy installation. Includes rear Stealth Shocks. Additional Attributes: GTIN: 00674866107373 Extened Information: Life Cycle Status: Available To Order Packaging: Quantity of Each: 1 Package UOM: EA Dimension: 24 x 13.26 x 12.5 inches

This quality Upper Control Arm system provides a 3.5in increased ride height over stock without creating suspension bind at full droop. Lift is accomplished with spacers that utilizes the factory coilover shocks for a stock ride. The Fabtech Upper Control Arms address the geometry of the front suspension with the new ride height for proper align-ability. Heavy duty ball joints allow for extended travel to eliminate binding. Due to the GM suspension geometry there are no differential drop brackets required for the CV axles to operate properly. Rear lift comes from 1in blocks and u-bolts. Value priced system with Fabtech quality. Increased ground clearance. Extended range upper ball joints provide a smooth quiet ride. Increased fender clearance compared to a Leveling Kit for 33in tall tires. Suspension can be restored to stock. Easy installation. Includes rear Performance Shocks. Additional Attributes: GTIN: 00674866107366 Extened Information: Life Cycle Status: Available To Order Packaging: Quantity of Each: 1 Package UOM: EA Dimension: 24 x 13.26 x 12.5 inches

This system offers a mild lift height with easy installation for clearance of 33in tall tires on K1500's w/ factory Magnetic Ride Control suspension. Lift is accomplished by utilizing the factory front Coilover shocks with steel spacer system that helps retain the stock ride of the front suspension. The stock upper control arms are replaced with thick wall DOM tubular arms that feature heavy duty extended range ball joints. These ball joints provide additional strength to the vehicles suspension compared to the factory. The front differential is relocated to keep CV angles proper with the new lift height while a 1/4in thick steel skid plate provides protection against offroad obstacles. Rear lift is accomplished with 1 1/2in rear lift block and u-bolts to help level the stance of the vehicles. - Value priced system with Fabtech quality Increased ground clearance Extended range upper ball joints provide a smooth quiet ride Increased fender clearance compared to a Leveling Kit for 33in tall tires Suspension can be restored to stock. Additional Attributes: GTIN: 00674866098343 Extened Information: Life Cycle Status: Available To Order Packaging: Quantity of Each: 1 Package UOM: EA Dimension: 22.53 x 12 x 15.59 inches

This system offers a mild lift height with easy installation for clearance of 33in tall tires on K1500's w/ factory Magnetic Ride Control suspension. Lift is accomplished by utilizing the factory front Coilover shocks with steel spacer system that helps retain the stock ride of the front suspension. The stock upper control arms are replaced with thick wall DOM tubular arms that feature heavy duty extended range ball joints. These ball joints provide additional strength to the vehicles suspension compared to the factory. The front differential is relocated to keep CV angles proper with the new lift height while a 1/4in thick steel skid plate provides protection against offroad obstacles. Rear lift is accomplished with 1 1/2in rear lift block and u-bolts to help level the stance of the vehicles. - Value priced system with Fabtech quality Increased ground clearance Extended range upper ball joints provide a smooth quiet ride Increased fender clearance compared to a Leveling Kit for 33in tall tires Suspension can be restored to stock Easy installation. Additional Attributes: GTIN: 00674866098091 Extened Information: Life Cycle Status: Available To Order Packaging: Quantity of Each: 1 Package UOM: EA Dimension: 22.53 x 12 x 15.59 inches