BD Diesel Stock Replacement Turbo - Dodge 2007.5-2012 6.7L HE351
$1,720.95
Specializing in remanufacturing turbos, BD offers units for Dodge, Ford, Chevy, Caterpillar, Detroit, Cummins, Komatsu, Toyota, automotive, light duty pick-up, agriculture, marine, commercial, industrial, gas and diesel applications. Quality exchange OEM turbochargers remanufactured in our shop, staffed with experienced industry-leading personnel. Fully equipped with manual and CNC lathes, high speed VSR precision balancer, precision grinders, measuring instruments, pressure blasters and wheelabrators.
Free shipping for returning core! (details included with product)
Additional Attributes:
GTIN: 00019025023482
Engine: 6.7L Cummins 07.5-12
Make: Dodge
Suggested Product: 1045965
Extened Information:
Emissions : Emission verification to be determined in ACES, vehicle application data.
Life Cycle Status: Available To Order
Packaging:
Quantity of Each: 1
Package UOM: EA
Dimension: 15 x 15 x 15 inches
BD Diesel 13-18 Dodge 6.7L Cummins 64.5mm Compressor 70mm Turbine Screamer Turbo
$2,995.00
A drop-in stock installation, stock looking replacement that is anything but stock! The larger Ballistic Billet compressor wheel and our new exclusive Low MOI QST turbine wheel results in reduced backpressure, quicker response, increased efficiency and increased turbine flow compared to the competition. This results in increased maximum potential power output, right up to 690 horsepower with performance modifications. No extra parts to install, just drop-in and enjoy the extra power potential.
50-STATE LEGAL!
CARB EO No D-553-5
Drops in to the stock location
Can support modifications up to 690HP
Ballistic Billet 64.5mm 7+7 blade compressor wheel and Low MOI QST 70mm 12 blade turbine wheel
The QST Turbine wheel as a 15% reduction in MOI (moment of inertia) which results in quicker turbo response
QST turbine Blade thickness decreased by 25% allowing for higher turbine gas flow and increased efficiency
Each actuator is calibrated and tested prior to shipping
VSR high speed balanced
Additional Attributes:
GTIN: 00019025021655
Engine: 6.7L Cummins 13-18
Make: Dodge
Suggested Product: 1081160-D3
Extened Information:
Emissions : Emission verification to be determined in ACES, vehicle application data.
Life Cycle Status: Available To Order
Packaging:
Quantity of Each: 1
Package UOM: EA
Dimension: 15 x 15 x 15 inches
BD Diesel Drain Plug for Deep Transmission Part 1061716
$4.95
Replacement drain plug for BD Trans Pans and Diff Covers
Replacement drain plug for BD Trans Pans and Diff Covers
Additional Attributes:
GTIN: 00019025022140
Engine: Jeep
Make: Ford
Extened Information:
Emissions : Emission verification to be determined in ACES, vehicle application data.
Life Cycle Status: Available To Order
Packaging:
Quantity of Each: 1
Package UOM: EA
Dimension: 10.9 x 6.8 x 1.75 inches
BD Diesel Differential Cover - 81-93 Dodge Dana 70
$319.95
BD's design deflects the oil back onto the ring gear and into the pinion gear for cooler longer life. Other differential covers are large and bulky resulting in lubricating oil being flung off the ring gear causing addition heat and/or wear.
Engineered cover design keeps oil on the gears
Deflects oil back onto the ring gear and into the pinion gear for cooler longer life
Extra capacity sump located at bottom for gears to pick up oil
Internal and external cooling fins
Stainless steel allen head cap bolts, fill plug
Magnetic drain plug
Gasketless cover has integral re-usable Viton O-Ring
Additional Attributes:
GTIN: 00019025017429
Engine: 5.9L Cummins 98.5-02 24-Valve
Make: Dodge
Extened Information:
Emissions : Emission verification to be determined in ACES, vehicle application data.
Life Cycle Status: Available To Order
Packaging:
Quantity of Each: 1
Package UOM: EA
Dimension: 17.5 x 14.3 x 7 inches
BD Diesel Differential Cover - 89-15 Ford F250-F350 Sterling 10.5 Differential
$386.95
BD's design deflects the oil back onto the ring gear and into the pinion gear for cooler longer life. Other differential covers are large and bulky resulting in lubricating oil being flung off the ring gear causing addition heat and/or wear.
Ford (1989-up) with Sterling #12-10.25 or 10.5 single rear wheel differential
Engineered cover design keeps oil on the gears
Deflects oil back onto the ring gear and into the pinion gear for cooler longer life
Extra capacity sump located at bottom for gears to pick up oil
Internal and external cooling fins
Stainless steel allen head cap bolts, fill plug
Magnetic drain plug
Gasketless cover has integral re-usable Viton O-Ring
Additional Attributes:
GTIN: 00019025016507
Engine: 7.3L Powerstroke 99-03
Make: Ford
Extened Information:
Emissions : Emission verification to be determined in ACES, vehicle application data.
Life Cycle Status: Available To Order
Packaging:
Quantity of Each: 1
Package UOM: EA
Dimension: 17.5 x 14.3 x 7 inches
BD Diesel Exhaust Manifold T6 Mount Gasket Set - Dodge 1998.5-2018 5.9L/6.7L
$82.95
Exhaust Manifold Gasket Kit for T6 mount 1045995-T6 / 1045996-T6 manifolds
Exhaust Manifold Gasket Kit for T6 mount 1045995-T6 / 1045996-T6 manifolds
Additional Attributes:
GTIN: 00019025014732
Engine: 6.7L Cummins 13-18
Make: Dodge
Suggested Product: 1045982
Extened Information:
Emissions : Emission verification to be determined in ACES, vehicle application data.
Life Cycle Status: Available To Order
Packaging:
Quantity of Each: 1
Package UOM: EA
Dimension: 5.1 x 4.6 x 3.6 inches
BD Diesel Exhaust Manifold T4 Mount Gasket Set - Dodge 1998.5-2018 5.9L/6.7L
$82.95
Exhaust Manifold Gasket Kit for T4 mount 1045995-T4 / 1045996-T4 manifolds
Exhaust Manifold Gasket Kit for T4 mount 1045995-T4 / 1045996-T4 manifolds
Additional Attributes:
GTIN: 00019025014725
Engine: 6.7L Cummins 13-18
Make: Dodge
Suggested Product: 1045982
Extened Information:
Emissions : Emission verification to be determined in ACES, vehicle application data.
Life Cycle Status: Available To Order
Packaging:
Quantity of Each: 1
Package UOM: EA
Dimension: 10.9 x 6.8 x 1.75 inches
BD Diesel 64.5mm Compressor 70mm Turbine Screamer Turbo Kit - 07.5-12 Dodge 6.7L Cummins
$2,995.00
A drop-in stock installation, stock looking replacement that is anything but stock! The larger Ballistic Billet compressor wheel and our new exclusive Low MOI QST turbine wheel results in reduced backpressure, quicker response, increased efficiency and increased turbine flow compared to the competition. This results in increased maximum potential power output, right up to 690 horsepower with performance modifications. No extra parts to install, just drop-in and enjoy the extra power potential.
Drops in to the stock location
Can support modifications up to 690HP
Ballistic Billet 64.5mm 7+7 blade compressor wheel and Low MOI QST 70mm 12 blade turbine wheel
The QST Turbine wheel as a 15% reduction in MOI (moment of inertia) which results in quicker turbo response
QST turbine Blade thickness decreased by 25% allowing for higher turbine gas flow and increased efficiency
Each actuator is calibrated and tested prior to shipping
VSR high speed balanced
Additional Attributes:
GTIN: 00019025017412
Engine: 6.7L Cummins 07.5-12
Make: Dodge
Suggested Product: 1061525
Extened Information:
Emissions : Electronically Announced
Life Cycle Status: Available To Order
Packaging:
Quantity of Each: 1
Package UOM: EA
Dimension: 15 x 15 x 15 inches
BD Diesel Killer Frost Plug Plate - 2003-2018 Dodge Cummins 5.9L/6.7L
$62.95
The coolant pressure inside the engine block can reach 70+psi at high rpm before the thermostat fully opens. This will cause a corroded frost plug to leak. The BD rear frost plug is able to be seal the leak without the need to hammer out the old frost plug. We recommend installing the rear frost plug plate when the transmission is removed. The plate can be installed with the transmission in place, however the surface finish on the back of the motor is critical and must be checked prior to use.
Works with the frost plug in place, blown out, or leaking
No need to punch the old frost plug out
Utilizes one large #333 O-ring
Works with and without a TCC crossover tube
Five flanged head bolts to keep the coolant contained
6.7L require the bellhousing support bracket to be removed
Perfect time to install one is when the transmission is removed!
Additional Attributes:
GTIN: 00019025020160
Engine: 6.7L Cummins 13-18
Make: Dodge
Suggested Product: 1050310DF
Extened Information:
Emissions : Emission verification to be determined in ACES, vehicle application data.
Life Cycle Status: Available To Order
Packaging:
Quantity of Each: 1
Package UOM: EA
Dimension: 9.6 x 6 x 1.15 inches
BD Diesel Killer Frost Plug Plate - 1989-2002 Dodge Cummins 5.9L
$62.95
The coolant pressure inside the engine block can reach 70+psi at high rpm before the thermostat fully opens. This will cause a corroded frost plug to leak. The BD rear frost plug is able to be seal the leak without the need to hammer out the old frost plug. We recommend installing the rear frost plug plate when the transmission is removed. The plate can be installed with the transmission in place, however the surface finish on the back of the motor is critical and must be checked prior to use.
Works with the frost plug in place, blown out, or leaking
No need to punch the old frost plug out
Utilizes one large #333 O-ring
Works with and without a TCC crossover tube
Perfect time to install one is when the transmission is removed!
Additional Attributes:
GTIN: 00019025020306
Engine: 5.9L Cummins 98.5-02 24-Valve
Make: Dodge
Suggested Product: 1040183
Extened Information:
Emissions : Emission verification to be determined in ACES, vehicle application data.
Life Cycle Status: Available To Order
Packaging:
Quantity of Each: 1
Package UOM: EA
Dimension: 6.25 x 6 x 1.6 inches
BD Diesel Crank Case Vent Filter Kit - 1999-2003 Ford 7.3L
$468.95
BD's Crank Case Vent Filter Kit for Ford 6.0L and 7.3L PowerStroke applications reduces crankcase oil vapor that passes through the crankcase vent and contaminates the intake system. Oil Vapor residue reduces turbocharger and intercooler efficiency, and also deteriorates the silicone boots-causing them to balloon and blow off. The Crank Case Vent Filter Kit prevents all of these issues, and includes everything you need for a professional installation, including all hardware and clamps. Installation time takes just two hours.
Reduces crankcase oil vapor that contaminates the intake system
Prevents deterioration of silicone boots causing them to balloon and blow off
Installation takes just two hours
Replacement filter element p/n 1302171
Additional Attributes:
GTIN: 00019025005129
Engine: 7.3L Powerstroke 99-03
Make: Ford
Extened Information:
Emissions : Emission verification to be determined in ACES, vehicle application data.
Life Cycle Status: Available To Order
Packaging:
Quantity of Each: 1
Package UOM: EA
Dimension: 12 x 12 x 9 inches
BD Diesel CCV Replacement Filter Element
$94.95
Replacement filter element for 1032171/1032175 Crank Case Vent Filter kits
Replacement filter element for 1032171/1032175 Crank Case Vent Filter kits
Additional Attributes:
GTIN: 00019025005709
Engine: 7.3L Powerstroke 99-03
Make: Ford
Extened Information:
Emissions : Emission verification to be determined in ACES, vehicle application data.
Life Cycle Status: Available To Order
Packaging:
Quantity of Each: 1
Package UOM: EA
Dimension: 6.5 x 3.5 x 3.5 inches
BD Diesel Xtrude Trans Cooler Temperature Sensor w/ Black Leads (180 On / 160 Off)
$35.95
Additional Attributes:
GTIN: 00019025020122
Extened Information:
Emissions : Emission verification to be determined in ACES, vehicle application data.
Life Cycle Status: Available To Order
Packaging:
Quantity of Each: 1
Package UOM: EA
Dimension: 10.9 x 1.75 x 6.8 inches
BD Diesel Differential Cover Pack Front & Rear - 14-18 Ram 2500/3500 w/o Rear Coil Springs
$564.95
Add a stylish look to your front and rear end with a BD Front Diff cover. Made from cast aluminum, BD differential covers have both internal and external fins for extra cooling plus a sleek curved design. Rear cover design deflects the oil back onto the ring gear and into the pinion gear for cooler longer life. Comes with separate fill and drain ports with stainless steel plugs for easier servicing. Includes stainless steel Allen head cap bolts and magnetic drain plug to help capture suspended material in the oil. Designed to be compatible with aftermarket track bars.
Front Cover fits AA 12-9.25
Gasketless cover has integral re-usable Viton O-Ring (Rear)
Front Cover capacity 2.7 quarts
Front Cover is compatible with aftermarket track bars
Rear Cover fits AA 14-11.5
Cast Aluminum Internal and external cooling fins
Separate fill and drain ports
Magnetic drain plugs
Stainless steel allen head cap bolts and fill plugs
Engineered cover design keeps oil on the gears (Rear)
Deflects oil back onto the ring gear and into the pinion gear for cooler longer life (Rear)
Extra capacity sump located at bottom for gears to pick up oil (Rear)
Additional Attributes:
GTIN: 00019025021778
Engine: 6.7L Cummins 13-18
Make: Dodge
Suggested Product: 1061525
Extened Information:
Emissions : Emission verification to be determined in ACES, vehicle application data.
Life Cycle Status: Available To Order
Packaging:
Quantity of Each: 1
Package UOM: EA
Dimension: 40 x 20 x 10 inches
BD Diesel Differential Cover Pack Front & Rear - 03-13 Dodge 2500 /03-12 3500
$557.95
Front Cover fits AA 14-9.25; Rear Cover fits AA 14-11.5; Cast Aluminum Internal and external cooling fins; Separate fill and drain ports; Magnetic drain plugs; Stainless steel allen head cap bolts and fill plugs; Engineered cover design keeps oil on the gears (Rear); Deflects oil back onto the ring gear and into the pinion gear for cooler longer life (Rear); Extra capacity sump located at bottom for gears to pick up oil (Rear); Gasketless cover has integral re-usable Viton O-Ring (Rear)
Front Cover fits AA 14-9.25
Rear Cover fits AA 14-11.5
Cast Aluminum Internal and external cooling fins
Separate fill and drain ports
Magnetic drain plugs
Stainless steel allen head cap bolts and fill plugs
Engineered cover design keeps oil on the gears (Rear)
Deflects oil back onto the ring gear and into the pinion gear for cooler longer life (Rear)
Extra capacity sump located at bottom for gears to pick up oil (Rear)
Gasketless cover has integral re-usable Viton O-Ring (Rear)
Additional Attributes:
GTIN: 00019025018983
Engine: 6.7L Cummins 13-18
Make: Dodge
Suggested Product: 1061501
Extened Information:
Emissions : Emission verification to be determined in ACES, vehicle application data.
Life Cycle Status: Available To Order
Packaging:
Quantity of Each: 1
Package UOM: EA
Dimension: 40 x 20 x 10 inches
BD Diesel Differential Cover Front - AA 14-9.25 - 03-13 Dodge 2500/03-12 3500
$319.95
Add a stylish look to your front end with a BD Front Diff cover. Made from cast aluminum, BD differential covers have both internal and external fins for extra cooling plus a sleek curved design. Comes with separate fill and drain ports with stainless steel plugs for easier servicing. Includes stainless steel Allen head cap bolts and magnetic drain plug to help capture suspended material in the oil. Designed to be compatible with aftermarket track bars.
Cast Aluminum Internal and external cooling fins
Separate fill and drain port
Stainless steel allen head cap bolts, fill plug
Magnetic drain plug
Additional Attributes:
GTIN: 00019025018976
Engine: 6.7L Cummins 13-18
Make: Dodge
Suggested Product: 1061827
Extened Information:
Emissions : Emission verification to be determined in ACES, vehicle application data.
Life Cycle Status: Available To Order
Packaging:
Quantity of Each: 1
Package UOM: EA
Dimension: 17.5 x 14.3 x 7 inches