All

B8 Control Arms are a direct fit upgrade for factory upper control arms on trucks and SUVs. The kit contains a pair of control arms which correct the caster alignment for better straight line stability with lifted suspensions, and the improved pivot angles increase wheel travel and reduce stress on the joints. These strong black powder-coated 4130 chromoly steel arms are a tubular design which allows for more spring and shock clearance and feature greasable polyurethane bushings and heavy duty ball joints for the ideal combination of ride quality and durability with minimal maintenance needed. They come with detailed instructions and all necessary hardware for easy installation and are compatible with all Bilstein shocks and coilover kits. All components are replaceable. Additional Attributes: GTIN: 00651860867007 Finish: Powder-Coated Black Arm Material: 4130 Chromoly Tubing Series: B8 Control Arms Arm Outer Pivot Type: Greasable Sealed Ball Joint Arm Design: Tubular Kit Contents: Pair of upper control arms with ball joints, mounting hardware, bushings, grease fittings, instructions Arm Inner Pivot Type: Greasable Black Urethane Bushings Extened Information: Life Cycle Status: Available To Order Emissions : Emission verification to be determined in ACES, vehicle application data. Packaging: Quantity of Each: 1.0 Package UOM: EA Dimension: 17.0000 x 18.0000 x 8.0000 inches PDF: E4-WM5-Y678A00_1

B8 Control Arms are a direct fit upgrade for factory upper control arms on trucks and SUVs. The kit contains a pair of control arms which correct the caster alignment for better straight line stability with lifted suspensions, and the improved pivot angles increase wheel travel and reduce stress on the joints. These strong black powder-coated 4130 chromoly steel arms are a tubular design which allows for more spring and shock clearance and feature greasable polyurethane bushings and heavy duty ball joints for the ideal combination of ride quality and durability with minimal maintenance needed. They come with detailed instructions and all necessary hardware for easy installation and are compatible with all Bilstein shocks and coilover kits. All components are replaceable. Additional Attributes: GTIN: 00651860888262 Arm Inner Pivot Type: Greasable Black Urethane Bushings Arm Outer Pivot Type: Greasable Sealed Ball Joint Series: B8 Control Arms Kit Contents: Pair of upper control arms with ball joints, mounting hardware, bushings, grease fittings, instructions Finish: Powder-Coated Black Arm Design: Tubular Arm Material: 4130 Chromoly Tubing Extened Information: Emissions : Emission verification to be determined in ACES, vehicle application data. Life Cycle Status: Available To Order Packaging: Quantity of Each: 1.0 Package UOM: EA Dimension: 17.0000 x 18.0000 x 8.0000 inches PDF: E4-WM5-Y727A00

B8 Control Arms are a direct fit upgrade for factory upper control arms on trucks and SUVs. The kit contains a pair of control arms which correct the caster alignment for better straight line stability with lifted suspensions, and the improved pivot angles increase wheel travel and reduce stress on the joints. These strong black powder-coated 4130 chromoly steel arms are a tubular design which allows for more spring and shock clearance and feature greasable polyurethane bushings and heavy duty ball joints for the ideal combination of ride quality and durability with minimal maintenance needed. They come with detailed instructions and all necessary hardware for easy installation and are compatible with all Bilstein shocks and coilover kits. All components are replaceable. Additional Attributes: GTIN: 00651860875460 Kit Contents: Pair of upper control arms with ball joints, mounting hardware, bushings, grease fittings, instructions Finish: Powder-Coated Black Arm Design: Tubular Arm Material: 4130 Chromoly Tubing Arm Inner Pivot Type: Greasable Black Urethane Bushings Arm Outer Pivot Type: Greasable Sealed Ball Joint Series: B8 Control Arms Extened Information: Emissions : Emission verification to be determined in ACES, vehicle application data. Life Cycle Status: Available To Order Packaging: Quantity of Each: 1.0 Package UOM: EA Dimension: 17.0000 x 18.0000 x 8.0000 inches PDF: E4-WM5-Y702A00_2

B8 Control Arms are a direct fit upgrade for factory upper control arms on trucks and SUVs. The kit contains a pair of control arms which correct the caster alignment for better straight line stability with lifted suspensions, and the improved pivot angles increase wheel travel and reduce stress on the joints. These strong black powder-coated 4130 chromoly steel arms are a tubular design which allows for more spring and shock clearance and feature greasable polyurethane bushings and heavy duty ball joints for the ideal combination of ride quality and durability with minimal maintenance needed. They come with detailed instructions and all necessary hardware for easy installation and are compatible with all Bilstein shocks and coilover kits. All components are replaceable. Additional Attributes: GTIN: 00651860878195 Arm Design: Tubular Arm Material: 4130 Chromoly Tubing Series: B8 Control Arms Kit Contents: Pair of upper control arms with ball joints, mounting hardware, bushings, grease fittings, instructions Finish: Powder-Coated Black Arm Inner Pivot Type: Greasable Black Urethane Bushings Arm Outer Pivot Type: Greasable Sealed Ball Joint Extened Information: Emissions : Emission verification to be determined in ACES, vehicle application data. Life Cycle Status: Available To Order Packaging: Quantity of Each: 1.0 Package UOM: EA Dimension: 17.0000 x 18.0000 x 8.0000 inches PDF: E4-WM5-Y703A00_2

These upper control arms feature ICON's patented Delta Joint. The Delta Joint is a heavy duty high angle ball joint that combines the durability of a ball joint with the performance characteristics of a traditional uniball. While the industry standard uniball does a great job of allowing the control arms of a vehicle to articulate with little bind, they do have an inherent weakness that leaves more to be desired when used in a daily driven application - exposure to the elements. The Delta Joint features a zinc plated housing providing the first layer of corrosion resistance, while a tough grease seal keeps potentially harmful elements out of the inner workings of the joint. Metal on metal construction and a greasable design increase the longevity of the Delta Joint while at the same time allowing for noise-free operation. What makes the Delta Joint unique is that it brings the best of both worlds to ICON upper control arms with features that make it more robust than a uniball, and at the same time capable of greater angularity than a typical ball joint. CNC machined 6061 billet aluminum upper control arms allow for on-vehicle camber and caster adjustment ICON upper control arms allow for additional wheel travel while improving suspension geometry for predictable handling Direct bolt-in design makes for a simple and straightforward installation Patented Delta Joint (U.S. Pat. 10,731,700) combines the durability and weather resistance of a ball joint with the performance characteristics of a uniball Delta Joint upper control arms carry ICON's exclusive 5 year limited warranty Additional Attributes: GTIN: 00840103411491 40: Yes 2384: Yes 2382: Press In 2383: Threaded 73: Rod End Bearing 2371: Yes 4888: Silver 2386: Billet 2389: Aluminum Finish: Anodized 3390: Performance 2339: yes 30: Yes 2330: No 2354: Performance OEM Wheels & Tires Fitment: Yes Recommended Aftermarket Tires: 33" x 11.50" (Larger Tires May Fit but Fender Trimming and Modifications will be Required) Recommended Aftermarket Wheels: ICON Alloys | 18x9" w/ 5.25" Backspace / 6mm Offset Add-On Part: 191014 - .25" COLLAR SPANNER PIN WRENCH Service Parts: 614520 - DELTA JOINT INSTALL ADAPTER AND SHIM Extened Information: Life Cycle Status: Available To Order Emissions : Emission verification to be determined in ACES, vehicle application data. Packaging: Quantity of Each: 1.0 Package UOM: EA Dimension: x x inches PDF: I98507DJ_REVA

These upper control arms feature ICON's patented Delta Joint. The Delta Joint is a heavy-duty high angle ball joint that combines the durability of a ball joint with the performance characteristics of a traditional uniball. While the industry standard uniball does a great job of allowing the control arms of a vehicle to articulate with little bind, they do have an inherent weakness that leaves more to be desired when used in a daily driven application - exposure to the elements. The Delta Joint features a zinc plated housing providing the first layer of corrosion resistance, while a tough grease seal keeps potentially harmful elements out of the inner workings of the joint. Metal on metal construction and a greaseable design increase the longevity of the Delta Joint while at the same time allowing for noise-free operation. What makes the Delta Joint unique is that it brings the best of both worlds to ICON upper control arms with features that make it more robust than a uniball, and at the same time capable of greater angularity than a typical ball joint. ICON Delta Joint 1026 DOM Steel Construction CNC Bent Tubing Serviceable Dual Stage Bushings CNC Machined Bushing Housings and Sleeves Built-In Caster Correction Black Semi-Gloss Powder Coat Finish Additional Attributes: GTIN: 00840103407432 2386: Tubular 2389: DOM Steel Finish: Powdercoated 3390: Performance 2339: yes 30: Yes 2330: No 2354: Performance Add-On Part: 191014 - .25" COLLAR SPANNER PIN WRENCH Service Parts: 614519 - DELTA JOINT INSTALL PRESS ADAPTER TUBE 40: No 2384: Yes 2382: Press In 2383: Threaded 73: Polyurethane 2371: Yes 4888: Black Extened Information: Emissions : Emission verification to be determined in ACES, vehicle application data. Life Cycle Status: Available To Order Packaging: Quantity of Each: 1.0 Package UOM: EA Dimension: x x inches PDF: I98510DJ_REVB

These upper control arms feature ICON's patented Delta Joint. The Delta Joint is a heavy duty high angle ball joint that combines the durability of a ball joint with the performance characteristics of a traditional uniball. While the industry standard uniball does a great job of allowing the control arms of a vehicle to articulate with little bind, they do have an inherent weakness that leaves more to be desired when used in a daily driven application - exposure to the elements. The Delta Joint features a zinc plated housing providing the first layer of corrosion resistance, while a tough grease seal keeps potentially harmful elements out of the inner workings of the joint. Metal on metal construction and a greasable design increase the longevity of the Delta Joint while at the same time allowing for noise-free operation. What makes the Delta Joint unique is that it brings the best of both worlds to ICON upper control arms with features that make it more robust than a uniball, and at the same time capable of greater angularity than a typical ball joint. CNC machined 6061 billet aluminum construction for light weight and exceptional strength Features ICON's Delta Joint Camber and caster adjustability allows for precise wheel alignment ICON double adjuster sleeves allow for on-vehicle adjustment Vehicle specific taper pin provides OE-like fitment PTFE Lined 7/8” FK Rod Ends for improved response Built in o-ring sealed dust cover cap Additional Attributes: GTIN: 00840103407463 40: Yes Adjustable Control Arm: yes 2384: Yes 2382: Press In 2383: Threaded 73: Rod End Bearing 2371: Yes 4888: Silver 2386: Upper 2389: Aluminum Finish: Anodized 3390: Performance 2339: yes Material: Aluminum 30: Yes 2330: No Quantity: 2 2354: Performance OEM Wheels & Tires Fitment: Yes Recommended Aftermarket Tires: 35" x 12.50" (Larger Tires May Fit but Fender Trimming and Modifications will be Required) Recommended Aftermarket Wheels: ICON Alloys | 17x8.5" w/ 5.00” Backspace / 6mm Offset Add-On Part: 191014 - .25" COLLAR SPANNER PIN WRENCH Service Parts: 614520 - DELTA JOINT INSTALL ADAPTER AND SHIM Extened Information: Emissions : Emission verification to be determined in ACES, vehicle application data. Life Cycle Status: Available To Order Packaging: Quantity of Each: 1.0 Package UOM: EA Dimension: x x inches PDF: I98562DJ_REVB

To ensure compatibility, ICON is no longer offering GM 2500HD/3500HD upper control arms as individual components. Upper control arms can only be purchased in unison with ICON shock absorbers as a complete system. The included ICON Vehicle Specific (V.S.) 2.5 Series shocks are designed and built to give your vehicle outstanding performance off-road and a smooth ride on the street. These shocks are configured specifically for each application in both length and damping tune. Like all ICON'S Shock Absorbers, V.S. 2.5 Series shocks are 100% rebuildable and 100% revalveable. The larger diameter and oil volume of ICON 2.5 IR Series shocks provide better ride quality and heat dissipation properties than the standard 2.0 Aluminum Series IR Shocks. If you are looking for a more user defined tune, consider looking into the Compression Damping Control Valve (CDC Valve) shocks. Features ICON's Patented Delta Joint (U.S. Patent No. 10,731,700) CNC Machined Bushing Housings and Sleeves Built-In Caster Correction Serviceable Dual Stage Bushings Black Semi-Gloss Powder Coat Finish One-piece digressive piston design with vehicle specific valving for unsurpassed performance and ride quality on and off-road Nitrogen charged monotube design with internal reservoir Premium grade 5WT shock oil for consistent suspension damping along a wide temperature range 7/8" diameter induction hardened, chrome plated shock shaft One-piece impact extruded aluminum cylinders offer excellent corrosion resistance and consistent finish 6061 aircraft grade aluminum CNC machined components 100% Rebuildable 100% Revalveable 1026 DOM Steel Construction CNC Bent Tubing Additional Attributes: GTIN: 00840103410630 40: No Adjustable Control Arm: No 2384: Yes 2382: Press In 2383: Threaded Bushing Color: Black 73: Polyurethane 2371: Yes 4888: Black 2386: Tubular 2389: DOM Steel Finish: Powdercoated 3390: Performance 2339: yes 30: Yes 2330: No 2354: Performance OEM Wheels & Tires Fitment: Yes Recommended Aftermarket Tires: 35" x 12.50" (Larger tires may fit but fender trimming and modifications will be required.) Recommended Aftermarket Wheels: ICON Alloys | 18x9" w/ 5.5” Backspace / 12mm Offset Add-On Part: 191011 - TUBULAR UCA BILLET CAP SET Service Parts: 614519 - DELTA JOINT INSTALL PRESS ADAPTER TUBE Extened Information: Emissions : Emission verification to be determined in ACES, vehicle application data. Life Cycle Status: Available To Order Packaging: Quantity of Each: 1.0 Package UOM: EA Dimension: x x inches PDF: I78732T_REVA

These upper control arms feature ICON's patented Delta Joint. The Delta Joint is a heavy-duty high angle ball joint that combines the durability of a ball joint with the performance characteristics of a traditional uniball. While the industry standard uniball does a great job of allowing the control arms of a vehicle to articulate with little bind, they do have an inherent weakness that leaves more to be desired when used in a daily driven application - exposure to the elements. The Delta Joint features a zinc plated housing providing the first layer of corrosion resistance, while a tough grease seal keeps potentially harmful elements out of the inner workings of the joint. Metal on metal construction and a greaseable design increase the longevity of the Delta Joint while at the same time allowing for noise-free operation. What makes the Delta Joint unique is that it brings the best of both worlds to ICON upper control arms with features that make it more robust than a uniball, and at the same time capable of greater angularity than a typical ball joint. CNC machined 6061 billet aluminum construction for light weight and exceptional strength Features ICON's Patented Delta Joint (U.S. Patent No. 10,731,700) Camber and caster adjustability allows for precise wheel alignment ICON double adjuster sleeves allow for on-vehicle adjustment Vehicle specific taper pin provides OE-like fitment PTFE Lined 7/8” FK Rod Ends for improved response Built in o-ring sealed dust cover cap Additional Attributes: GTIN: 00840103407449 40: Yes 2384: Yes 2382: Press In 2383: Threaded 73: Rod End Bearing 2371: Yes 4888: Silver 2386: Billet 2389: Aluminum Finish: Anodized 3390: Performance 2339: yes 30: Yes 2330: No 2354: Performance Add-On Part: 191013 - NIPPLE GREASING ADAPTER KIT Service Parts: 614519 - DELTA JOINT INSTALL PRESS ADAPTER TUBE Extened Information: Emissions : Emission verification to be determined in ACES, vehicle application data. Life Cycle Status: Available To Order Packaging: Quantity of Each: 1.0 Package UOM: EA Dimension: x x inches PDF: I98520DJ_REVB

To ensure compatibility, ICON is no longer offering GM 2500HD/3500HD upper control arms as individual components. Upper control arms can only be purchased in unison with ICON shock absorbers as a complete system. The included ICON Vehicle Specific (V.S.) 2.5 Aluminum Series shocks are designed and built to give your vehicle outstanding performance off-road and a smooth ride on the street. These shocks are configured specifically for each application in both length and damping tune. Like all of ICON's Shock Absorbers, the V.S. 2.5 Series shocks are 100% rebuildable and 100% revalveable. For piggyback and specific remote reservoir applications, ICON'S unique use of a 6061-billet aluminum manifold a few inches below the top cap of the shock creates an internal Bump Zone that when used creates an additional 20% of damping force. This additional force helps prevent harsh bottom outs and controls the suspension when compressing at high velocity. Remote reservoirs ensure optimum performance by increasing the duration of consistent damping regardless of situation, keeping the shocks at a cooler operating temperature during heavy use. The ICON CDC Valve is an externally adjustable valve that restricts oil flow into the reservoir which creates 10 levels of compression damping force ranges. Features ICON's Patented Delta Joint (U.S. Patent No. 10,731,700) 7/8" diameter induction hardened, chrome plated shock shaft One-piece impact extruded aluminum cylinders offer excellent corrosion resistance and consistent finish 100% Rebuildable 100% Revalveable CNC machined 6061 billet aluminum construction for light weight and exceptional strength Additional camber and caster adjustability allows for precise wheel alignment PTFE Lined 7/8” FK Rod Ends for improved response One-piece digressive piston design with vehicle specific valving for unsurpassed performance and ride quality on and off-road Nitrogen charged monotube design with remote reservoir Remote reservoir design improves heat dissipation to reduce shock fade during prolonged use ICON's CDC Valve technology allows for 10 levels of high-resolution compression adjustability with the turn of a knob ICON's internal "Bump Zone" increases damping by 20% to provide more control as the shock approaches full compression Built in o-ring sealed dust cover cap Vehicle specific taper pin provides OE-like fitment Premium grade 5WT shock oil for consistent suspension damping along a wide temperature range Additional Attributes: GTIN: 00840103410579 40: No Adjustable Control Arm: yes 2384: Yes 2382: Press In 2383: Threaded Bushing Color: Gold 73: Rod End Bearing 2371: Yes 4888: Silver 2386: Billet 2389: Aluminum Finish: Powdercoated 3390: Performance 2339: yes 30: Yes 2330: Yes 2354: Performance OEM Wheels & Tires Fitment: Yes Recommended Aftermarket Tires: 35" x 12.50" (Larger tires may fit but fender trimming and modifications will be required.) Recommended Aftermarket Wheels: ICON Alloys | 18x9" w/ 5.5” Backspace / 12mm Offset Add-On Part: 77202 - 2020-UP GM HD FRONT SPLASH GUARD KIT Service Parts: 614520 - DELTA JOINT INSTALL ADAPTER AND SHIM Extened Information: Emissions : Emission verification to be determined in ACES, vehicle application data. Life Cycle Status: Available To Order Packaging: Quantity of Each: 1.0 Package UOM: EA Dimension: x x inches PDF: I78735_REVA

To ensure compatibility, ICON is no longer offering GM 2500HD/3500HD upper control arms as individual components. Upper control arms can only be purchased in unison with ICON shock absorbers as a complete system. The included ICON Vehicle Specific (V.S.) 2.5 Aluminum Series shocks are designed and built to give your vehicle outstanding performance off-road and a smooth ride on the street. These shocks are configured specifically for each application in both length and damping tune. Like all of ICON's Shock Absorbers, the V.S. 2.5 Series shocks are 100% rebuildable and 100% revalveable. For piggyback and specific remote reservoir applications, ICON'S unique use of a 6061-billet aluminum manifold a few inches below the top cap of the shock creates an internal Bump Zone that when used creates an additional 20% of damping force. This additional force helps prevent harsh bottom outs and controls the suspension when compressing at high velocity. Remote reservoirs ensure optimum performance by increasing the duration of consistent damping regardless of situation, keeping the shocks at a cooler operating temperature during heavy use. 100% Rebuildable 100% Revalveable CNC machined 6061 billet aluminum construction for light weight and exceptional strength Additional camber and caster adjustability allows for precise wheel alignment PTFE Lined 7/8” FK Rod Ends for improved response One-piece digressive piston design with vehicle specific valving for unsurpassed performance and ride quality on and off-road Nitrogen charged monotube design with remote reservoir Remote reservoir design improves heat dissipation to reduce shock fade during prolonged use All ICON 2.5 Series Piggyback and Remote Reservoir shocks can be upgraded to ICON's Compression Damping Control Valve (CDCV) ICON's internal "Bump Zone" increases damping by 20% to provide more control as the shock approaches full compression Built in o-ring sealed dust cover cap Vehicle specific taper pin provides OE-like fitment Features ICON's Patented Delta Joint (U.S. Patent No. 10,731,700) Premium grade 5WT shock oil for consistent suspension damping along a wide temperature range 7/8" diameter induction hardened, chrome plated shock shaft One-piece impact extruded aluminum cylinders offer excellent corrosion resistance and consistent finish Additional Attributes: GTIN: 00840103410562 40: No 2384: Yes 2382: Press In 2383: Threaded Bushing Color: Gold 73: Rod End Bearing 2371: Yes 4888: Silver 2386: Billet 2389: Aluminum Finish: Powdercoated 3390: Performance 2339: yes 30: Yes 2330: Yes 2354: Performance OEM Wheels & Tires Fitment: Yes Recommended Aftermarket Tires: 35" x 12.50" (Larger tires may fit but fender trimming and modifications will be required.) Recommended Aftermarket Wheels: ICON Alloys | 18x9" w/ 5.5” Backspace / 12mm Offset Add-On Part: 77202 - 2020-UP GM HD FRONT SPLASH GUARD KIT Service Parts: 614520 - DELTA JOINT INSTALL ADAPTER AND SHIM Extened Information: Emissions : Emission verification to be determined in ACES, vehicle application data. Life Cycle Status: Available To Order Packaging: Quantity of Each: 1.0 Package UOM: EA Dimension: x x inches PDF: I78734_REVA

To ensure compatibility, ICON is no longer offering GM 2500HD/3500HD upper control arms as individual components. Upper control arms can only be purchased in unison with ICON shock absorbers as a complete system. The included ICON Vehicle Specific (V.S.) 2.5 Aluminum Series shocks are designed and built to give your vehicle outstanding performance off-road and a smooth ride on the street. These shocks are configured specifically for each application in both length and damping tune. Like all of ICON's Shock Absorbers, the V.S. 2.5 Series shocks are 100% rebuildable and 100% revalveable. For piggyback and specific remote reservoir applications, ICON'S unique use of a 6061-billet aluminum manifold a few inches below the top cap of the shock creates an internal Bump Zone that when used creates an additional 20% of damping force. This additional force helps prevent harsh bottom outs and controls the suspension when compressing at high velocity. Remote reservoirs ensure optimum performance by increasing the duration of consistent damping regardless of situation, keeping the shocks at a cooler operating temperature during heavy use. The ICON CDC Valve is an externally adjustable valve that restricts oil flow into the reservoir which creates 10 levels of compression damping force ranges. Features ICON's Patented Delta Joint (U.S. Patent No. 10,731,700) Remote reservoir design improves heat dissipation to reduce shock fade during prolonged use ICON's internal "Bump Zone" increases damping by 20% to provide more control as the shock approaches full compression Premium grade 5WT shock oil for consistent suspension damping along a wide temperature range 7/8" diameter induction hardened, chrome plated shock shaft One-piece impact extruded aluminum cylinders offer excellent corrosion resistance and consistent finish 6061 aircraft grade aluminum CNC machined components 100% Rebuildable 100% Revalveable 1026 DOM Steel Construction CNC Bent Tubing CNC Machined Bushing Housings and Sleeves Built-In Caster Correction Serviceable Dual Stage Bushings Black Semi-Gloss Powder Coat Finish One-piece digressive piston design with vehicle specific valving for unsurpassed performance and ride quality on and off-road Nitrogen charged monotube design with remote reservoir ICON's CDC Valve technology allows for 10 levels of high-resolution compression adjustability with the turn of a knob Additional Attributes: GTIN: 00840103410623 40: No 2384: Yes 2382: Press In 2383: Threaded Bushing Color: Black 73: Polyurethane 2371: Yes 4888: Black 2386: Tubular 2389: Steel Finish: Powdercoated 3390: Performance 2339: yes 30: Yes 2330: No 2354: Performance OEM Wheels & Tires Fitment: Yes Recommended Aftermarket Tires: 35" x 12.50" (Larger tires may fit but fender trimming and modifications will be required.) Recommended Aftermarket Wheels: ICON Alloys | 18x9" w/ 5.5” Backspace / 12mm Offset Add-On Part: 191011 - TUBULAR UCA BILLET CAP SET Service Parts: 614519 - DELTA JOINT INSTALL PRESS ADAPTER TUBE Extened Information: Emissions : Emission verification to be determined in ACES, vehicle application data. Life Cycle Status: Available To Order Packaging: Quantity of Each: 1.0 Package UOM: EA Dimension: 31.0000 x 13.0000 x 7.0000 inches PDF: I78735T_REVB

To ensure compatibility, ICON is no longer offering GM 2500HD/3500HD upper control arms as individual components. Upper control arms can only be purchased in unison with ICON shock absorbers as a complete system. The included ICON Vehicle Specific (V.S.) 2.5 Aluminum Series shocks are designed and built to give your vehicle outstanding performance off-road and a smooth ride on the street. These shocks are configured specifically for each application in both length and damping tune. Like all of ICON's Shock Absorbers, the V.S. 2.5 Series shocks are 100% rebuildable and 100% revalveable. For piggyback and specific remote reservoir applications, ICON'S unique use of a 6061-billet aluminum manifold a few inches below the top cap of the shock creates an internal Bump Zone that when used creates an additional 20% of damping force. This additional force helps prevent harsh bottom outs and controls the suspension when compressing at high velocity. Remote reservoirs ensure optimum performance by increasing the duration of consistent damping regardless of situation, keeping the shocks at a cooler operating temperature during heavy use. Features ICON's Patented Delta Joint (U.S. Patent No. 10,731,700) CNC Bent Tubing CNC Machined Bushing Housings and Sleeves Built-In Caster Correction Serviceable Dual Stage Bushings Black Semi-Gloss Powder Coat Finish One-piece digressive piston design with vehicle specific valving for unsurpassed performance and ride quality on and off-road Nitrogen charged monotube design with remote reservoir Remote reservoir design improves heat dissipation to reduce shock fade during prolonged use All ICON 2.5 Series Piggyback and Remote Reservoir shocks can be upgraded to ICON's Compression Damping Control Valve (CDCV) ICON's internal "Bump Zone" increases damping by 20% to provide more control as the shock approaches full compression Premium grade 5WT shock oil for consistent suspension damping along a wide temperature range 7/8" diameter induction hardened, chrome plated shock shaft One-piece impact extruded aluminum cylinders offer excellent corrosion resistance and consistent finish 6061 aircraft grade aluminum CNC machined components 100% Rebuildable 100% Revalveable 1026 DOM Steel Construction Additional Attributes: GTIN: 00840103410616 40: No Adjustable Control Arm: No 2384: Yes 2382: Press In 2383: Threaded Bushing Color: Black 73: Polyurethane 2371: Yes 4888: Black 2386: Tubular 2389: DOM Steel Finish: Powdercoated 3390: Performance 2339: yes 30: Yes 2330: No 2354: Performance OEM Wheels & Tires Fitment: Yes Recommended Aftermarket Tires: 35" x 12.50" (Larger tires may fit but fender trimming and modifications will be required.) Recommended Aftermarket Wheels: ICON Alloys | 18x9" w/ 5.5” Backspace / 12mm Offset Add-On Part: 191011 - TUBULAR UCA BILLET CAP SET Service Parts: 614519 - DELTA JOINT INSTALL PRESS ADAPTER TUBE Extened Information: Emissions : Emission verification to be determined in ACES, vehicle application data. Life Cycle Status: Available To Order Packaging: Quantity of Each: 1.0 Package UOM: EA Dimension: x x inches PDF: I78734T_REVB

To ensure compatibility, ICON is no longer offering GM 2500HD/3500HD upper control arms as individual components. Upper control arms can only be purchased in unison with ICON shock absorbers as a complete system. The included ICON Vehicle Specific (V.S.) 2.5 Series shocks are designed and built to give your vehicle outstanding performance off-road and a smooth ride on the street. These shocks are configured specifically for each application in both length and damping tune. Like all ICON'S Shock Absorbers, V.S. 2.5 Series shocks are 100% rebuildable and 100% revalveable. The larger diameter and oil volume of ICON 2.5 IR Series shocks provide better ride quality and heat dissipation properties than the standard 2.0 Aluminum Series IR Shocks. If you are looking for a more user defined tune, consider looking into the Compression Damping Control Valve (CDC Valve) shocks. Features ICON's Patented Delta Joint (U.S. Patent No. 10,731,700) Vehicle specific taper pin provides OE-like fitment Premium grade 5WT shock oil for consistent suspension damping along a wide temperature range 7/8" diameter induction hardened, chrome plated shock shaft One-piece impact extruded aluminum cylinders offer excellent corrosion resistance and consistent finish 100% Rebuildable 100% Revalveable CNC machined 6061 billet aluminum construction for light weight and exceptional strength Additional camber and caster adjustability allows for precise wheel alignment PTFE Lined 7/8” FK Rod Ends for improved response One-piece digressive piston design with vehicle specific valving for unsurpassed performance and ride quality on and off-road Nitrogen charged monotube design with internal reservoir Built in o-ring sealed dust cover cap Additional Attributes: GTIN: 00840103410555 40: No Adjustable Control Arm: yes 2384: Yes 2382: Press In 2383: Threaded Bushing Color: Gold 73: Rod End Bearing 2371: Yes 4888: Silver 2386: Billet 2389: Aluminum Finish: Anodized 3390: Performance 2339: yes 30: Yes 2330: Yes 2354: Performance OEM Wheels & Tires Fitment: Yes Recommended Aftermarket Tires: 35" x 12.50" (Larger tires may fit but fender trimming and modifications will be required.) Recommended Aftermarket Wheels: ICON Alloys | 18x9" w/ 5.5” Backspace / 12mm Offset Add-On Part: 77202 - 2020-UP GM HD FRONT SPLASH GUARD KIT Service Parts: 614520 - DELTA JOINT INSTALL ADAPTER AND SHIM Extened Information: Emissions : Emission verification to be determined in ACES, vehicle application data. Life Cycle Status: Available To Order Packaging: Quantity of Each: 1.0 Package UOM: EA Dimension: x x inches PDF: I78732_REVA

These upper control arms feature ICON's patented Delta Joint. The Delta Joint is a heavy duty high angle ball joint that combines the durability of a ball joint with the performance characteristics of a traditional uniball. While the industry standard uniball does a great job of allowing the control arms of a vehicle to articulate with little bind, they do have an inherent weakness that leaves more to be desired when used in a daily driven application - exposure to the elements. The Delta Joint features a zinc plated housing providing the first layer of corrosion resistance, while a tough grease seal keeps potentially harmful elements out of the inner workings of the joint. Metal on metal construction and a greasable design increase the longevity of the Delta Joint while at the same time allowing for noise-free operation. What makes the Delta Joint unique is that it brings the best of both worlds to ICON upper control arms with features that make it more robust than a uniball, and at the same time capable of greater angularity than a typical ball joint. CNC machined 6061 billet aluminum upper control arms allow for on-vehicle camber and caster adjustment ICON upper control arms allow for additional wheel travel while improving suspension geometry for predictable handling Direct bolt-in design makes for a simple and straightforward installation Patented Delta Joint (U.S. Pat. 10,731,700) combines the durability and weather resistance of a ball joint with the performance characteristics of a uniball Delta Joint upper control arms carry ICON's exclusive 5 year limited warranty Additional Attributes: GTIN: 00840103407425 40: Yes 2384: Yes 2382: Press In 2383: Threaded 73: Rod End Bearing 2371: Yes 4888: Silver 2386: Billet 2389: Aluminum Finish: Anodized 3390: Performance 2339: yes 30: Yes 2330: No 2354: Performance OEM Wheels & Tires Fitment: Yes Recommended Aftermarket Tires: 33" x 11.50" (Larger Tires May Fit but Fender Trimming and Modifications will be Required) Recommended Aftermarket Wheels: ICON Alloys | 18x9" w/ 5.25" Backspace / 6mm Offset Add-On Part: 191014 - .25" COLLAR SPANNER PIN WRENCH Service Parts: 614520 - DELTA JOINT INSTALL ADAPTER AND SHIM Extened Information: Emissions : Emission verification to be determined in ACES, vehicle application data. Life Cycle Status: Available To Order Packaging: Quantity of Each: 1.0 Package UOM: EA Dimension: x x inches PDF: I98505DJ_REVB

To ensure compatibility, ICON is no longer offering GM 2500HD/3500HD upper control arms as individual components. Upper control arms can only be purchased in unison with ICON shock absorbers as a complete system. The included ICON Vehicle Specific (V.S.) 2.5 Series shocks are designed and built to give your vehicle outstanding performance off-road and a smooth ride on the street. These shocks are configured specifically for each application in both length and damping tune. Like all of ICON's Shock Absorbers, the V.S. 2.5 Series shocks are 100% rebuildable and 100% revalveable. For piggyback and specific remote reservoir applications, ICON'S unique use of a 6061-billet aluminum manifold a few inches below the top cap of the shock creates an internal Bump Zone that when used creates an additional 20% of damping force. This additional force helps prevent harsh bottom outs and controls the suspension when compressing at high velocity. The ICON CDC Valve is an externally adjustable valve that restricts oil flow into the reservoir which creates 10 levels of compression damping force ranges. ICON Delta Joint All ICON 2.5 Series Piggyback and Remote Reservoir shocks can be upgraded to ICON's Compression Damping Control Valve (CDCV) 100% Rebuildable 1026 DOM Steel Construction 100% Revalveable CNC Bent Tubing Serviceable Dual Stage Bushings CNC Machined Bushing Housings and Sleeves Built-In Caster Correction Black Semi-Gloss Powder Coat Finish ICON's CDC Valve technology allows for 10 levels of high-resolution compression adjustability with the turn of a knob Remote reservoir design improves heat dissipation to reduce shock fade during prolonged use ICON's internal "Bump Zone" increases damping by 20% to provide more control as the shock approaches full compression Premium grade 5WT shock oil for consistent suspension damping along a wide temperature range Nitrogen charged monotube design with remote reservoir One-piece digressive piston design with vehicle specific valving for unsurpassed performance and ride quality on and off-road 7/8" diameter induction hardened, chrome plated shock shaft PTFE lined spherical bearings and application specific mounting hardware 6061 aircraft grade aluminum CNC machined components CAD plated, precision machined 1026 DOM steel shock body for maximum durability and corrosion resistance Additional Attributes: GTIN: 00840103408705 40: No 2384: Yes 2382: Press In 2383: Threaded Bushing Color: Black 73: Polyurethane 2371: Yes Color: Black 4888: Black 2386: Tubular 2389: Steel Finish: Powdercoated 3390: Performance 2339: yes 30: Yes 2330: No 2354: Performance OEM Wheels & Tires Fitment: Yes Recommended Aftermarket Tires: 33" x 11.50" (Larger tires may fit but fender trimming and modifications will be required.) Recommended Aftermarket Wheels: ICON Alloys | 18x9" w/ 5.5” Backspace / 12mm Offset Add-On Part: 191013 - NIPPLE GREASING ADAPTER KIT Service Parts: 252011 - 2.5 PIGGYBACK/REMOTE RESI/BYPASS REBUILD KIT Extened Information: Emissions : Emission verification to be determined in ACES, vehicle application data. Life Cycle Status: Available To Order Packaging: Quantity of Each: 1.0 Package UOM: EA Dimension: x x inches