Your turbocharged 2.0L JL Wrangler was built to pull in a massive amount of air, cram it into the engine, mix it with fuel, and make power. But the turbocharger can only push out as much air as it can pull in. In order for the turbocharger to perform at peak efficiency, the intake also needs to flow as much as possible. That’s where the Mishimoto 2018-2023 Jeep Wrangler JL 2.0L Performance Intake comes in.Our intake utilizes a precision-engineered rotational-molded tube with dyno-tested resonators and a custom filter to let your 2.0L Hurricane’s turbo breathe easy. The smoother intake tube and large filter allow the Mishimoto intake to flow up to 39-percent better than the stock intake. That extra flow lets your turbo pull in more air and, combined with tuning, means more power. We painstakingly designed and tested the integrated resonator to keep the power in the most useful RPM range. Our intake retains the stock lower airbox and mounting points for easy installation while the CNC-machined EVAP venturi ensures CEL-free running.The Mishimoto 2018-2023 Jeep Wrangler JL 2.0L Performance Intake is available with an oiled or dry washable filter for maximum flow in any environment. Like all of our Jeep Wrangler products, this performance intake is backed by our Mishimoto Lifetime Warranty for a lifetime of easy breathing.This Part Fits: Year Make Model Submodel 2021 Jeep Wrangler 80th Anniversary 2021,2023 Jeep Wrangler Freedom 2021 Jeep Wrangler Islander 2018-2021,2023 Jeep Wrangler Rubicon 2018-2021,2023 Jeep Wrangler Sport 2018-2021,2023 Jeep Wrangler Sport S 2021 Jeep Wrangler Unlimited 80th Anniversary 2021,2023 Jeep Wrangler Unlimited Freedom 2021,2023 Jeep Wrangler Unlimited High Altitude 2021,2023 Jeep Wrangler Unlimited High Altitude 4xe 2021 Jeep Wrangler Unlimited Islander 2018-2019 Jeep Wrangler Unlimited Moab 2018-2021,2023 Jeep Wrangler Unlimited Rubicon 2021 Jeep Wrangler Unlimited Rubicon 392 2021,2023 Jeep Wrangler Unlimited Rubicon 4xe 2018-2021,2023 Jeep Wrangler Unlimited Sahara 2021,2023 Jeep Wrangler Unlimited Sahara 4xe 2021,2023 Jeep Wrangler Unlimited Sahara Altitude 2018-2021,2023 Jeep Wrangler Unlimited Sport 2021,2023 Jeep Wrangler Unlimited Sport Altitude 2018-2021,2023 Jeep Wrangler Unlimited Sport S 2021,2023 Jeep Wrangler Unlimited Willys 2023 Jeep Wrangler Unlimited Willys 4xe 2021,2023 Jeep Wrangler Unlimited Willys Sport 2021,2023 Jeep Wrangler Willys 2021,2023 Jeep Wrangler Willys Sport

Give your Fiesta ST the airflow it deserves. The Mishimoto Fiesta ST intake cranks the power up by 6 whp and 10 wtq while running on the stock tune. The mandrel-bent aluminum piping allows for smooth, uninterrupted airflow straight to the turbo inlet hose and into the turbo. The Fiesta ST intake pipe also features a CNC-machined MAF housing that uses the stock MAF sensor, and it includes two CCV ports with a silicone PCV adapter. The piping is available with either a polished, wrinkle black, or wrinkle red finish to maximize engine bay aesthetics. This Fiesta ST intake also features a black powder-coated airbox to keep the air filter isolated from unwanted engine bay heat. This will help keep your air charge nice and cool, and, like all Mishimoto Fiesta ST parts, this intake comes with the unbeatable Mishimoto Lifetime Warranty!This Part Fits: Year Make Model Submodel 2016-2019 Ford Fiesta ST 2014-2019 Mini Cooper S

Give your Fiesta ST the airflow it deserves. The Mishimoto Fiesta ST intake cranks the power up by 6 whp and 10 wtq while running on the stock tune. The mandrel-bent aluminum piping allows for smooth, uninterrupted airflow straight to the turbo inlet hose and into the turbo. The Fiesta ST intake pipe also features a CNC-machined MAF housing that uses the stock MAF sensor, and it includes two CCV ports with a silicone PCV adapter. The piping is available with either a polished, wrinkle black, or wrinkle red finish to maximize engine bay aesthetics. This Fiesta ST intake also features a black powder-coated airbox to keep the air filter isolated from unwanted engine bay heat. This will help keep your air charge nice and cool, and, like all Mishimoto Fiesta ST parts, this intake comes with the unbeatable Mishimoto Lifetime Warranty!This Part Fits: Year Make Model Submodel 2016-2019 Ford Fiesta ST 2014-2019 Mini Cooper S

Give your Fiesta ST the airflow it deserves. The Mishimoto Fiesta ST intake cranks the power up by 6 whp and 10 wtq while running on the stock tune. The mandrel-bent aluminum piping allows for smooth, uninterrupted airflow straight to the turbo inlet hose and into the turbo. The Fiesta ST intake pipe also features a CNC-machined MAF housing that uses the stock MAF sensor, and it includes two CCV ports with a silicone PCV adapter. The piping is available with either a polished, wrinkle black, or wrinkle red finish to maximize engine bay aesthetics. This Fiesta ST intake also features a black powder-coated airbox to keep the air filter isolated from unwanted engine bay heat. This will help keep your air charge nice and cool, and, like all Mishimoto Fiesta ST parts, this intake comes with the unbeatable Mishimoto Lifetime Warranty!This Part Fits: Year Make Model Submodel 2016-2019 Ford Fiesta ST 2014-2019 Mini Cooper S

Give your Fiesta ST the airflow it deserves. The Mishimoto Fiesta ST intake cranks the power up by 6 whp and 10 wtq while running on the stock tune. The mandrel-bent aluminum piping allows for smooth, uninterrupted airflow straight to the turbo inlet hose and into the turbo. The Fiesta ST intake pipe also features a CNC-machined MAF housing that uses the stock MAF sensor, and it includes two CCV ports. The piping is available with either a polished, wrinkle black, or wrinkle red finish to maximize engine bay aesthetics. This Fiesta ST intake also features a black powder-coated airbox to keep the air filter isolated from unwanted engine bay heat. This will help keep your air charge nice and cool, and, like all Mishimoto Fiesta ST parts, this intake comes with the unbeatable Mishimoto Lifetime Warranty!This Part Fits: Year Make Model Submodel 2014-2015 Ford Fiesta ST 2014-2019 Mini Cooper S

Since its introduction in 2010, the EcoBoost line of V6 engines has proven to be a fantastic alternative to large-displacement V8 options. Ample tuning potential and gobs of torque, all while returning great fuel mileage, make the EcoBoost platform a winner in our book. But, allowing your engine to breathe easier through intake and exhaust modifications can take the already impressive EcoBoost to another level of performance. That's why Mishimoto has developed this turbo inlet tube kit for your 2017-2020 Ford F-150 3.5L EcoBoost. This turbo inlet tube kit boasts an internal volume increase of up to 61-percent over the stock inlet pipes to allow your turbos to pull in as much air as they could ever need. Our engineers have also removed bottlenecks and other obstructions to reduce restriction by up to 23-percent over stock. All of this is achieved while protecting the intake charge from engine bay heat with a cross-linked polyethylene (XLPE) construction. This material is ideal for withstanding high engine bay temperatures and resists degradation from fuel and oil. To make this kit's reliability match its performance, we've CNC-machined every vacuum fitting from aluminum for a leak-free fit. The included EVAP fitting has also been CNC-machined and flow bench tested to 100-percent match the OEM part and ensure CEL-free performance. The Mishimoto turbo inlet tubes perform perfectly on the stock tune and fit with both the stock air intake box and the Mishimoto F-150 EcoBoost Performance Air Intake. The Mishimoto 2017-2020 Ford F-150 3.5L EcoBoost turbo inlet tube kit includes both turbo inlet tubes, DuraCoreâ„¢ silicone couplers, and stainless-steel clamps for a hassle-free installation. So, toss your restrictive stock turbo inlet tubing in the trash and upgrade your intake airflow with the Mishimoto turbo inlet tube kit. As with all our F-150 EcoBoost products, this kit includes our signature Mishimoto Lifetime Warranty for a lifetime of performance.This Part Fits: Year Make Model Submodel 2017-2021 Ford F-150 King Ranch 2017-2021 Ford F-150 Lariat 2017-2021 Ford F-150 Limited 2017-2021 Ford F-150 Platinum 2018-2021 Ford F-150 Police Responder 2017-2021 Ford F-150 Raptor 2017-2021 Ford F-150 SSV 2021 Ford F-150 Tremor 2017-2021 Ford F-150 XL 2017-2021 Ford F-150 XLT

"Mishimoto has developed a performance air intake engineered specifically for the 1999--2005 BMW E46 323i/325i/328i. This intake is safe to use with the stock tune as it will not hurt air/fuel ratios under load. This intake has a unique and aggressive tone under load, and the free-flowing design amplifies engine induction sounds. Check out the video to hear the tone. The stock intake duct is utilized to provide cool airflow to the high-flow Mishimoto oiled air filter, which features increased filtration surface area compared to the stock paper filter. This filter can be cleaned and reused, providing a lifetime of service. The intake includes a steel heatshield with pre-assembled rubber trim to keep hot engine air out and help draw cold outside air into the filter. This unit is a complete bolt-on that functions perfectly with the stock tune and can be installed in one hour using common hand tools. This performance air intake kit is also fully functional with our silicone intake hoses as well. This kit includes the Mishimoto Lifetime Warranty, ensuring superior product quality and craftsmanship."This Part Fits: Year Make Model Submodel 2000 BMW 323Ci Base 1999-2000 BMW 323i Base 1999 BMW 323is Base 2001-2006 BMW 325Ci Base 2001-2005 BMW 325i Base 2001-2005 BMW 325xi Base 2000 BMW 328Ci Base 1999-2000 BMW 328i Base 1999 BMW 328is Base 2014-2019 Mini Cooper S

Mishimoto has developed a performance air intake engineered specifically for the 2001--2006 BMW E46 330i. This E46 intake is safe to use with the stock tune as it will not hurt air/fuel ratios under load. This intake has a unique and aggressive tone, and the free-flowing design amplifies engine induction sounds. The stock E46 intake duct is utilized to provide cool airflow to the high-flow Mishimoto oiled air filter, which features increased filtration surface area compared to the stock paper filter. This filter can be cleaned and reused, providing a lifetime of service. The E46 intake includes a steel heatshield with pre-assembled rubber trim to keep hot engine air out and help draw cold outside air in. This unit is a complete bolt-on that functions perfectly with the stock tune and can be installed in one hour using common hand tools. This performance E46 intake kit is also fully functional with the Mishimoto Silicone E46 Intake Hoses. As with all Mishimoto E46 parts, this kit includes the Mishimoto Lifetime Warranty, ensuring superior product quality and craftsmanship.This Part Fits: Year Make Model Submodel 2001-2006 BMW 330Ci Base 2001-2006 BMW 330i Base 2001-2006 BMW 330xi Base 2014-2019 Mini Cooper S

Helping your engine breathe better is a great way to extract maximum performance for a small investment. In addition, intake/exhaust modifications are fantastic steppingstones that provide even greater benefits as you begin to upgrade other systems of your vehicle. Following the release of our Performance Intake for the 2017-2021 Civic Type R, our engineering team found another aspect of the induction system that could benefit from innovation. The stock turbo inlet pipe is a very sturdy cast-aluminum component that supplies ample airflow for stock and lightly modified vehicles. Despite this, the internal pathway leaves room for improvement for those seeking maximum airflow. Using the latest in 3D printing, CAD modeling, and flow bench technology, we created an optimal pathway for airflow from the air intake box to the turbocharger. These enhancements result in an inlet pipe that is 16.7-percent less restrictive than the stock unit. Our 2017-2021 Civic Type R turbo inlet tube is constructed with a robust CNC-machined cast-aluminum turbo compressor inlet connection flange. This mating surface is designed to OEM specifications, providing a perfect bolt-on fit. The upper portion of the tube is fabricated from mandrel-bent aluminum piping, which is professionally TIG welded to the cast lower. This kit includes a 4-ply silicone coupler to mate the Mishimoto Performance Intake MAF housing with our new inlet tube, as well as high-quality stainless steel worm-gear clamps and an EVAP hose adapter flange to make installation a breeze. We offer the option of either red or black powder-coated finish, providing an excellent aesthetic upgrade for your engine bay. As with all our products, this Inlet Pipe Upgrade Kit includes our signature Mishimoto Lifetime Warranty.This Part Fits: Year Make Model Submodel 2017-2021 Honda Civic Type R 2021 Honda Civic Type R Limited Edition

Our performance air intake for the 2017-2020 Honda Civic Si is finally here! This intake was engineered specifically for the new turbocharged Civic and is a direct-fit modification that will provide enhanced engine performance and improved throttle response ? plus it will add a little flair under the hood! This intake has a unique and aggressive tone under acceleration and boost that will be very noticeable. The steel wire reinforced silicone intake arm improves airflow and keeps intake air temperatures under control as opposed to an aluminum design. The black-powdercoated steel airbox covers and protects the Mishimoto high performance air filter from engine bay heat and eliminates the possibility of hydrolock with the placement being closer to the hood. The box makes use of the stock air diverter found right underneath the hood that directed airflow into the stock airbox. The MAF housing has a venturi-style inlet, bringing in much smoother airflow compared to the conventional MAF housing design. This intake makes consistent dyno-proven gains of about 4hp and 4ft-lbs of torque and was designed in the USA at our Delaware headquarters. This unit is a complete bolt-on part that functions perfectly with the stock tune and includes the Mishimoto Lifetime Warranty, ensuring superior product quality and craftsmanship.This Part Fits: Year Make Model Submodel 2017-2018 Honda Civic EX 2017-2018 Honda Civic EX-L 2017-2018 Honda Civic EX-T 2017-2018 Honda Civic LX 2017-2018 Honda Civic LX-P 2017-2020 Honda Civic Si 2017-2018 Honda Civic Sport 2018 Honda Civic Sport Touring 2017-2018 Honda Civic Touring 2014-2019 Mini Cooper S

Our performance air intake for the 2017-2020 Honda Civic Si is finally here! This intake was engineered specifically for the new turbocharged Civic and is a direct-fit modification that will provide enhanced engine performance and improved throttle response - plus it will add a little flair under the hood! This intake has a unique and aggressive tone under acceleration and boost that will be very noticeable. The steel wire reinforced silicone intake arm improves airflow and keeps intake air temperatures under control as opposed to an aluminum design. The black-powdercoated steel airbox covers and protects the Mishimoto high performance air filter from engine bay heat and eliminates the possibility of hydrolock with the placement being closer to the hood. The box makes use of the stock air diverter found right underneath the hood that directed airflow into the stock airbox. The MAF housing has a venturi-style inlet, bringing in much smoother airflow compared to the conventional MAF housing design. This intake makes consistent dyno-proven gains of about 4hp and 4ft-lbs of torque and was designed in the USA at our Delaware headquarters. This unit is a complete bolt-on part that functions perfectly with the stock tune and includes the Mishimoto Lifetime Warranty, ensuring superior product quality and craftsmanship.This Part Fits: Year Make Model Submodel 2017-2018 Honda Civic EX 2017-2018 Honda Civic EX-L 2017-2018 Honda Civic EX-T 2017-2018 Honda Civic LX 2017-2018 Honda Civic LX-P 2017-2020 Honda Civic Si 2017-2018 Honda Civic Sport 2018 Honda Civic Sport Touring 2017-2018 Honda Civic Touring 2014-2019 Mini Cooper S

Our performance air intake for the 2017-2020 Honda Civic Si is finally here! This intake was engineered specifically for the new turbocharged Civic and is a direct-fit modification that will provide enhanced engine performance and improved throttle response - plus it will add a little flair under the hood! This intake has a unique and aggressive tone under acceleration and boost that will be very noticeable. The steel wire reinforced silicone intake arm improves airflow and keeps intake air temperatures under control as opposed to an aluminum design. The black-powdercoated steel airbox covers and protects the Mishimoto high performance air filter from engine bay heat and eliminates the possibility of hydrolock with the placement being closer to the hood. The box makes use of the stock air diverter found right underneath the hood that directed airflow into the stock airbox. The MAF housing has a venturi-style inlet, bringing in much smoother airflow compared to the conventional MAF housing design. This intake makes consistent dyno-proven gains of about 4hp and 4ft-lbs of torque and was designed in the USA at our Delaware headquarters. This unit is a complete bolt-on part that functions perfectly with the stock tune and includes the Mishimoto Lifetime Warranty, ensuring superior product quality and craftsmanship.This Part Fits: Year Make Model Submodel 2017-2018 Honda Civic EX 2017-2018 Honda Civic EX-L 2017-2018 Honda Civic EX-T 2017-2018 Honda Civic LX 2017-2018 Honda Civic LX-P 2017-2020 Honda Civic Si 2017-2018 Honda Civic Sport 2018 Honda Civic Sport Touring 2017-2018 Honda Civic Touring 2014-2019 Mini Cooper S

Our performance air intake for the 2016+ Honda Civic 1.5L Turbo is finally here! This intake was engineered specifically for the new turbocharged Civic and is a direct-fit modification that will provide enhanced engine performance and improved throttle response ? plus it will add a little flair under the hood! This intake has a unique and aggressive tone under acceleration and boost that will be very noticeable. The steel wire reinforced silicone intake arm improves airflow and keeps intake air temperatures under control as opposed to an aluminum design. The black-powdercoated steel airbox covers and protects the Mishimoto high performance air filter from engine bay heat and eliminates the possibility of hydrolock with the placement being closer to the hood. The box makes use of the stock air diverter found right underneath the hood that directed airflow into the stock airbox. The MAF housing has a venturi-style inlet, bringing in much smoother airflow compared to the conventional MAF housing design. This intake makes consistent dyno-proven gains of about 9hp and 10ft-lbs of torque and was designed in the USA at our Delaware headquarters. This unit is a complete bolt-on part that functions perfectly with the stock tune and includes the Mishimoto Lifetime Warranty, ensuring superior product quality and craftsmanship.This Part Fits: Year Make Model Submodel 2017-2021 Honda Civic EX 2016-2021 Honda Civic EX-L 2016-2018 Honda Civic EX-T 2017-2021 Honda Civic LX 2017-2021 Honda Civic Sport 2017-2021 Honda Civic Sport Touring 2016-2021 Honda Civic Touring 2014-2019 Mini Cooper S

Our performance air intake for the 2016+ Honda Civic 1.5L Turbo is finally here! This intake was engineered specifically for the new turbocharged Civic and is a direct-fit modification that will provide enhanced engine performance and improved throttle response ? plus it will add a little flair under the hood! This intake has a unique and aggressive tone under acceleration and boost that will be very noticeable. The steel wire reinforced silicone intake arm improves airflow and keeps intake air temperatures under control as opposed to an aluminum design. The black-powdercoated steel airbox covers and protects the Mishimoto high performance air filter from engine bay heat and eliminates the possibility of hydrolock with the placement being closer to the hood. The box makes use of the stock air diverter found right underneath the hood that directed airflow into the stock airbox. The MAF housing has a venturi-style inlet, bringing in much smoother airflow compared to the conventional MAF housing design. This intake makes consistent dyno-proven gains of about 9hp and 10ft-lbs of torque and was designed in the USA at our Delaware headquarters. This unit is a complete bolt-on part that functions perfectly with the stock tune and includes the Mishimoto Lifetime Warranty, ensuring superior product quality and craftsmanship.This Part Fits: Year Make Model Submodel 2017-2021 Honda Civic EX 2016-2021 Honda Civic EX-L 2016-2018 Honda Civic EX-T 2017-2021 Honda Civic LX 2017-2021 Honda Civic Sport 2017-2021 Honda Civic Sport Touring 2016-2021 Honda Civic Touring 2014-2019 Mini Cooper S

Our performance air intake for the 2016+ Honda Civic 1.5L Turbo is finally here! This intake was engineered specifically for the new turbocharged Civic and is a direct-fit modification that will provide enhanced engine performance and improved throttle response ? plus it will add a little flair under the hood! This intake has a unique and aggressive tone under acceleration and boost that will be very noticeable. The steel wire reinforced silicone intake arm improves airflow and keeps intake air temperatures under control as opposed to an aluminum design. The black-powdercoated steel airbox covers and protects the Mishimoto high performance air filter from engine bay heat and eliminates the possibility of hydrolock with the placement being closer to the hood. The box makes use of the stock air diverter found right underneath the hood that directed airflow into the stock airbox. The MAF housing has a venturi-style inlet, bringing in much smoother airflow compared to the conventional MAF housing design. This intake makes consistent dyno-proven gains of about 9hp and 10ft-lbs of torque and was designed in the USA at our Delaware headquarters. This unit is a complete bolt-on part that functions perfectly with the stock tune and includes the Mishimoto Lifetime Warranty, ensuring superior product quality and craftsmanship.This Part Fits: Year Make Model Submodel 2017-2021 Honda Civic EX 2016-2021 Honda Civic EX-L 2016-2018 Honda Civic EX-T 2017-2021 Honda Civic LX 2017-2021 Honda Civic Sport 2017-2021 Honda Civic Sport Touring 2016-2021 Honda Civic Touring 2014-2019 Mini Cooper S

Add horsepower and sound to your Civic Si with the new Mishimoto Civic Si Performance Air Intake. This kit is engineered specifically for your 2006 -- 2011 Honda Civic Si and includes everything needed to replace the restrictive stock airbox. This dyno-proven air intake provides 8 hp and 6 tq gains over the stock intake while maintaining safe air/fuel ratios. Installation is quick and simple, perfect for some extra punch on the street or autocross course. The Mishimoto Honda Civic Si Performance Air Intake includes everything needed for installation, installs in under one hour, and works perfectly with the stock tune. The mandrel-bent aluminum intake pipe is available with a polished or black powder-coated finish. This pipe utilizes a CNC-machined mass airflow sensor (MAF) housing to provide accurate and consistent MAF readings, which translates into a smooth power band. To reduce air intake temperatures, a powder-coated heat shield is placed between the air filter and hot exhaust manifold, significantly reducing heat-soak. The Mishimoto free-flowing air filter provides an 85-percent greater surface area, optimal airflow, and proper filtration of dirt and debris. The included Mishimoto oiled air filter is completely serviceable, allowing for a lifetime of reliable use. Additionally this kit includes a silicone coupler, clamps, and all other hardware necessary to complete a quick installation for easy bolt-on power. Along with an upgrade in power, this intake also provides an aggressive and rich intake tone that is a huge improvement over the stock intake, especially when VTEC activates. The Mishimoto Honda Civic Si Performance Air Intake is designed in Delaware, USA and includes the Mishimoto Lifetime WarrantyThis Part Fits: Year Make Model Submodel 2008 Honda Civic MUGEN Si 2006-2011 Honda Civic Si 2014-2019 Mini Cooper S

Add horsepower and sound to your Civic Si with the new Mishimoto Civic Si Performance Air Intake. This kit is engineered specifically for your 2006 -- 2011 Honda Civic Si and includes everything needed to replace the restrictive stock airbox. This dyno-proven air intake provides 8 hp and 6 tq gains over the stock intake while maintaining safe air/fuel ratios. Installation is quick and simple, perfect for some extra punch on the street or autocross course. The Mishimoto Honda Civic Si Performance Air Intake includes everything needed for installation, installs in under one hour, and works perfectly with the stock tune. The mandrel-bent aluminum intake pipe is available with a polished or black powder-coated finish. This pipe utilizes a CNC-machined mass airflow sensor (MAF) housing to provide accurate and consistent MAF readings, which translates into a smooth power band. To reduce air intake temperatures, a powder-coated heat shield is placed between the air filter and hot exhaust manifold, significantly reducing heat-soak. The Mishimoto free-flowing air filter provides an 85-percent greater surface area, optimal airflow, and proper filtration of dirt and debris. The included Mishimoto oiled air filter is completely serviceable, allowing for a lifetime of reliable use. Additionally this kit includes a silicone coupler, clamps, and all other hardware necessary to complete a quick installation for easy bolt-on power. Along with an upgrade in power, this intake also provides an aggressive and rich intake tone that is a huge improvement over the stock intake, especially when VTEC activates. The Mishimoto Honda Civic Si Performance Air Intake is designed in Delaware, USA and includes the Mishimoto Lifetime WarrantyThis Part Fits: Year Make Model Submodel 2008 Honda Civic MUGEN Si 2006-2011 Honda Civic Si 2014-2019 Mini Cooper S

Our engineers have put a lot of RandD hours into the Mishimoto Performance Intake for the 2016+ Chevy Camaro 2.0T. We went through several designs to get to where we are now, and this will truly wake up your LGT motor with the help of extra air surging through your system. This kit fits all two-liter 2016 Camaros and will provide dyno proven performance gains of 21hp and 18ft-lbs of torque. We also improved pressure drop by over 40-percent, giving you increased airflow over stock. The airbox is made of steel and powder-coated black to help fight air intake temperatures, while our MAF housing is made of a glass-reinforced, plastic-injected mold with a built-in air straightener. The intake elbow is made of a five-ply silicone with steel wire reinforcement to prevent misshaping under vacuum and keep the engine heat at bay. The silicone design is an improvement over the bulky plastic intake elbow, replacing the stock sound suppression chamber attached to the turbo and giving you smoother airflow throughout. We performed hundreds of miles of road testing to ensure the safety of running it on a completely stock motor, so no tune is required! This kit comes with everything required for installation, along with a pre-oiled Mishimoto Performance Air Filter, the necessary hardware and our Mishimoto Lifetime Warranty. Check out our engineering blog for in-depth details on the design!This Part Fits: Year Make Model Submodel 2017-2023 Chevrolet Camaro LS 2016-2023 Chevrolet Camaro LT 2014-2019 Mini Cooper S

Our engineers have put a lot of RandD hours into the Mishimoto Performance Intake for the 2016+ Chevy Camaro 2.0T. We went through several designs to get to where we are now, and this will truly wake up your LGT motor with the help of extra air surging through your system. This kit fits all two-liter 2016 Camaros and will provide dyno proven performance gains of 21hp and 18ft-lbs of torque. We also improved pressure drop by over 40-percent, giving you increased airflow over stock. The airbox is made of steel and powder-coated black to help fight air intake temperatures, while our MAF housing is made of a glass-reinforced, plastic-injected mold with a built-in air straightener. The intake elbow is made of a five-ply silicone with steel wire reinforcement to prevent misshaping under vacuum and keep the engine heat at bay. The silicone design is an improvement over the bulky plastic intake elbow, replacing the stock sound suppression chamber attached to the turbo and giving you smoother airflow throughout. We performed hundreds of miles of road testing to ensure the safety of running it on a completely stock motor, so no tune is required! This kit comes with everything required for installation, along with a pre-oiled Mishimoto Performance Air Filter, the necessary hardware and our Mishimoto Lifetime Warranty. Check out our engineering blog for in-depth details on the design!This Part Fits: Year Make Model Submodel 2017-2023 Chevrolet Camaro LS 2016-2023 Chevrolet Camaro LT 2014-2019 Mini Cooper S

Our engineers have put a lot of RandD hours into the Mishimoto Performance Intake for the 2016+ Chevy Camaro 2.0T. We went through several designs to get to where we are now, and this will truly wake up your LGT motor with the help of extra air surging through your system. This kit fits all two-liter 2016 Camaros and will provide dyno proven performance gains of 21hp and 18ft-lbs of torque. We also improved pressure drop by over 40-percent, giving you increased airflow over stock. The airbox is made of steel and powder-coated black to help fight air intake temperatures, while our MAF housing is made of a glass-reinforced, plastic-injected mold with a built-in air straightener. The intake elbow is made of a five-ply silicone with steel wire reinforcement to prevent misshaping under vacuum and keep the engine heat at bay. The silicone design is an improvement over the bulky plastic intake elbow, replacing the stock sound suppression chamber attached to the turbo and giving you smoother airflow throughout. We performed hundreds of miles of road testing to ensure the safety of running it on a completely stock motor, so no tune is required! This kit comes with everything required for installation, along with a pre-oiled Mishimoto Performance Air Filter, the necessary hardware and our Mishimoto Lifetime Warranty. Check out our engineering blog for in-depth details on the design!This Part Fits: Year Make Model Submodel 2017-2023 Chevrolet Camaro LS 2016-2023 Chevrolet Camaro LT 2014-2019 Mini Cooper S

Add easy horsepower to your 2013+ BRZ/FR-S with the Mishimoto Performance Cold-Air Intake! Our engineers spent months designing, testing, and perfecting this product to develop a 10 whp / 8 wtq bolt-on power increase. In addition to the impressive power increase, our engineering team ensured that safe A/F ratios are maintained throughout the entire powerband. The core of this intake is our mandrel-bent aluminum intake pipe that provides a smooth path for airflow. Additionally, the CNC-machined mass airflow (MAF) housing and air straightener ensure laminar airflow across the sensor to provide accurate readings. This intake is designed as a true cold-air system, with filter placement outside the hot engine bay to reduce the chance of heat soak. The kit also includes a fully serviceable Mishimoto oiled air filter, which provides a 16-percent increase in filter surface area, allowing for greater airflow and superior filtration. The Mishimoto BRZ/FR-S Performance Cold-Air Intake includes a powder-coated air diverter that mounts behind the front bumper and ensures that the radiator, AC condenser, and air intake are supplied with copious amounts of cool air. This intake provides power you can hear! It is a huge upgrade for intake noise and provides a nice throaty intake tone, especially under full throttle. For personalized styling, we offer this kit in a polished finish and powder-coated wrinkle black. As with all our products, this intake kit includes the Mishimoto Lifetime Warranty, ensuring superior product quality and craftsmanship.Installation InstructionsWhitepaperThis Part Fits: Year Make Model Submodel 2014-2019 Mini Cooper S 2013-2016 Scion FR-S Base 2013-2020 Subaru BRZ Limited 2013-2019 Subaru BRZ Premium 2015 Subaru BRZ Series.Blue 2019 Subaru BRZ Series.Gray 2016 Subaru BRZ Series.HyperBlue 2017 Subaru BRZ Series.Yellow 2018,2020 Subaru BRZ TS 2017-2020 Toyota 86 Base 2018-2020 Toyota 86 GT 2020 Toyota 86 Hakone Edition 2017 Toyota 86 Special Edition 2019 Toyota 86 TRD Special Edition

Add easy horsepower to your 2013+ BRZ/FR-S with the Mishimoto Performance Cold-Air Intake! Our engineers spent months designing, testing, and perfecting this product to develop a 10 whp / 8 wtq bolt-on power increase. In addition to the impressive power increase, our engineering team ensured that safe A/F ratios are maintained throughout the entire powerband. The core of this intake is our mandrel-bent aluminum intake pipe that provides a smooth path for airflow. Additionally, the CNC-machined mass airflow (MAF) housing and air straightener ensure laminar airflow across the sensor to provide accurate readings. This intake is designed as a true cold-air system, with filter placement outside the hot engine bay to reduce the chance of heat soak. The kit also includes a fully serviceable Mishimoto oiled air filter, which provides a 16-percent increase in filter surface area, allowing for greater airflow and superior filtration. The Mishimoto BRZ/FR-S Performance Cold-Air Intake includes a powder-coated air diverter that mounts behind the front bumper and ensures that the radiator, AC condenser, and air intake are supplied with copious amounts of cool air. This intake provides power you can hear! It is a huge upgrade for intake noise and provides a nice throaty intake tone, especially under full throttle. For personalized styling, we offer this kit in a polished finish and powder-coated wrinkle black. As with all our products, this intake kit includes the Mishimoto Lifetime Warranty, ensuring superior product quality and craftsmanship.Installation InstructionsWhitepaperThis Part Fits: Year Make Model Submodel 2014-2019 Mini Cooper S 2013-2016 Scion FR-S Base 2013-2020 Subaru BRZ Limited 2013-2019 Subaru BRZ Premium 2015 Subaru BRZ Series.Blue 2019 Subaru BRZ Series.Gray 2016 Subaru BRZ Series.HyperBlue 2017 Subaru BRZ Series.Yellow 2018,2020 Subaru BRZ TS 2017-2020 Toyota 86 Base 2018-2020 Toyota 86 GT 2020 Toyota 86 Hakone Edition 2017 Toyota 86 Special Edition 2019 Toyota 86 TRD Special Edition

Add easy horsepower to your 2013+ BRZ/FR-S with the Mishimoto Subaru BRZ / Scion FR-S Performance Air Intake! We understand that removing the front bumper of your new BRZ/FR-S is not ideal, so our engineers designed this Performance Air Intake to develop a 7 whp / 5 wtq bolt-on power increase with no bumper removal required. In addition to the impressive power increase, our engineering team ensured that safe A/F ratios are maintained throughout the entire powerband. This intake uses a silicone induction hose and aluminum intake pipe that provides a smooth path for airflow. Additionally, the CNC-machined mass airflow (MAF) housing and air straightener ensure laminar airflow across the sensor to provide accurate readings. The kit also includes a fully serviceable Mishimoto oiled air filter, which provides a 16-percent increase in filter surface area, allowing for greater airflow and superior filtration. The Mishimoto BRZ / FR-S Performance Cold-Air Intake includes a powder-coated airbox to ensure the hot engine bay does not heat soak the air filter. The engineers at Mishimoto designed the airbox to fit properly with the Mishimoto BRZ / FR-S Oil Cooler Kit. This intake provides power you can hear! It is a huge upgrade for intake noise and provides a nice throaty intake tone, especially under full throttle. For personalized styling, we offer this kit with a black, blue, or red silicone induction hose. As with all our products, this intake kit includes the Mishimoto Lifetime Warranty.inThis Part Fits: Year Make Model Submodel 2014-2019 Mini Cooper S 2013-2016 Scion FR-S Base 2013-2020 Subaru BRZ Limited 2013-2019 Subaru BRZ Premium 2015 Subaru BRZ Series.Blue 2019 Subaru BRZ Series.Gray 2016 Subaru BRZ Series.HyperBlue 2017 Subaru BRZ Series.Yellow 2018,2020 Subaru BRZ TS 2017-2020 Toyota 86 Base 2018-2020 Toyota 86 GT 2020 Toyota 86 Hakone Edition 2017 Toyota 86 Special Edition 2019 Toyota 86 TRD Special Edition

Add easy horsepower to your 2013+ BRZ/FR-S with the Mishimoto Subaru BRZ / Scion FR-S Performance Air Intake! We understand that removing the front bumper of your new BRZ/FR-S is not ideal, so our engineers designed this Performance Air Intake to develop a 7 whp / 5 wtq bolt-on power increase with no bumper removal required. In addition to the impressive power increase, our engineering team ensured that safe A/F ratios are maintained throughout the entire powerband. This intake uses a silicone induction hose and aluminum intake pipe that provides a smooth path for airflow. Additionally, the CNC-machined mass airflow (MAF) housing and air straightener ensure laminar airflow across the sensor to provide accurate readings. The kit also includes a fully serviceable Mishimoto oiled air filter, which provides a 16-percent increase in filter surface area, allowing for greater airflow and superior filtration. The Mishimoto BRZ / FR-S Performance Cold-Air Intake includes a powder-coated airbox to ensure the hot engine bay does not heat soak the air filter. The engineers at Mishimoto designed the airbox to fit properly with the Mishimoto BRZ / FR-S Oil Cooler Kit. This intake provides power you can hear! It is a huge upgrade for intake noise and provides a nice throaty intake tone, especially under full throttle. For personalized styling, we offer this kit with a black, blue, or red silicone induction hose. As with all our products, this intake kit includes the Mishimoto Lifetime Warranty.inThis Part Fits: Year Make Model Submodel 2014-2019 Mini Cooper S 2013-2016 Scion FR-S Base 2013-2020 Subaru BRZ Limited 2013-2019 Subaru BRZ Premium 2015 Subaru BRZ Series.Blue 2019 Subaru BRZ Series.Gray 2016 Subaru BRZ Series.HyperBlue 2017 Subaru BRZ Series.Yellow 2018,2020 Subaru BRZ TS 2017-2020 Toyota 86 Base 2018-2020 Toyota 86 GT 2020 Toyota 86 Hakone Edition 2017 Toyota 86 Special Edition 2019 Toyota 86 TRD Special Edition

Add easy horsepower to your 2013+ BRZ/FR-S with the Mishimoto Subaru BRZ / Scion FR-S Performance Air Intake! We understand that removing the front bumper of your new BRZ/FR-S is not ideal, so our engineers designed this Performance Air Intake to develop a 7 whp / 5 wtq bolt-on power increase with no bumper removal required. In addition to the impressive power increase, our engineering team ensured that safe A/F ratios are maintained throughout the entire powerband. This intake uses a silicone induction hose and aluminum intake pipe that provides a smooth path for airflow. Additionally, the CNC-machined mass airflow (MAF) housing and air straightener ensure laminar airflow across the sensor to provide accurate readings. The kit also includes a fully serviceable Mishimoto oiled air filter, which provides a 16-percent increase in filter surface area, allowing for greater airflow and superior filtration. The Mishimoto BRZ / FR-S Performance Cold-Air Intake includes a powder-coated airbox to ensure the hot engine bay does not heat soak the air filter. The engineers at Mishimoto designed the airbox to fit properly with the Mishimoto BRZ / FR-S Oil Cooler Kit. This intake provides power you can hear! It is a huge upgrade for intake noise and provides a nice throaty intake tone, especially under full throttle. For personalized styling, we offer this kit with a black, blue, or red silicone induction hose. As with all our products, this intake kit includes the Mishimoto Lifetime Warranty.inThis Part Fits: Year Make Model Submodel 2014-2019 Mini Cooper S 2013-2016 Scion FR-S Base 2013-2020 Subaru BRZ Limited 2013-2019 Subaru BRZ Premium 2015 Subaru BRZ Series.Blue 2019 Subaru BRZ Series.Gray 2016 Subaru BRZ Series.HyperBlue 2017 Subaru BRZ Series.Yellow 2018,2020 Subaru BRZ TS 2017-2020 Toyota 86 Base 2018-2020 Toyota 86 GT 2020 Toyota 86 Hakone Edition 2017 Toyota 86 Special Edition 2019 Toyota 86 TRD Special Edition

The Bronco is back, and with two options of powerful turbocharged engines, it was born to run free. The 2.3L EcoBoost cranks out 300 horsepower and 325 lb.-ft. of torque, making it capable both on and off-road. But what enthusiast doesn’t want more from their vehicle? We here at Mishimoto are never ones to settle for stock, that’s why we’ve developed this performance intake for your 2021+ Ford Bronco 2.3L EcoBoost. The Mishimoto 2021+ Ford Bronco 2.3L EcoBoost performance intake is constructed from rotational molded cross-linked polyethylene. This ultra-strong material allows us to create smooth airflow while effectively keeping engine bay heat out of your intake air. This construction, combined with the 4.5-in high-flow filter, results in an intake that is 29% less restrictive than stock. To keep the intake flowing through any terrain, we’ve also maintained the stock fresh air inlet, which features a dust trap to protect the air filter from dust and debris. If you’re ready to let your 2021+ Ford Bronco 2.3L EcoBoost breathe as free as it can run, this Mishimoto Performance intake is for you. And, like all Mishimoto products, it’s backed by our Lifetime Warranty, so you can drive easy knowing we’ve got you covered.This Part Fits: Year Make Model Submodel 2021-2023 Ford Bronco Badlands 2021-2023 Ford Bronco Base 2021-2023 Ford Bronco Big Bend 2021-2023 Ford Bronco Black Diamond 2022-2023 Ford Bronco Everglades 2023 Ford Bronco Heritage Edition 2021-2023 Ford Bronco Outer Banks

Give your 2018-2022 Honda Accord 2.0T the attitude it deserves with the Mishimoto Performance Air Intake. Honda might have left the V6 in history with the 10th generation Accord, but in It's place sits the de-tuned version of the Civic Type R?s powerplant. Where Honda designed the Accord to be a quiet and comfortable daily driver, some might want a little extra hiss and growl from their turbocharged Accord. Lucky for you, Mishimoto is here to deliver. The Mishimoto Performance Air Intake for your 2.0T Accord alleviates the restrictions and mufflers put in place by Honda's engineers, starting with our precision-adjusted MAF housing. CNC-machined from high-grade aluminum, our MAF housing in tandem with our silicone coupler creates a better flow for intake air while still maintaining safe air-fuel ratios. Our kit also features a Mishimoto high-flow oiled air filter incased in a robust rotational-molded airbox to keep out unwanted engine bay heat. Our airbox is topped with a sheet of carbon-fiber to give a boost to your Accord's engine bay aesthetic. Coupled together, our improvements to the 2.0T?s intake system give the Accord a much needed attitude adjustment. On top of the added aggressive engine tone, our intake improves flow by 50-percent, as well as providing max power gains of 15.6 horsepower and 12.9 torque to the wheels. The Mishimoto 2018-2022 Honda Accord 2.0T Performance Air Intake also includes the Mishimoto Lifetime Warranty for a worry-free installation.This Part Fits: Year Make Model Submodel 2018-2019 Honda Accord EX 2018-2020 Honda Accord EX-L 2018-2019 Honda Accord Hybrid 2018-2019 Honda Accord Hybrid EX 2018-2019 Honda Accord Hybrid EX-L 2018-2019 Honda Accord Hybrid Touring 2018-2019 Honda Accord LX 2018-2022 Honda Accord Sport 2018-2022 Honda Accord Touring

Give your 2018+ Honda Accord 1.5T the attitude and power it deserves with this Mishimoto Performance Air Intake. Honda might have left the V6 behind with the 10th generation Accord, but in its place sits a turbocharged 1.5L that's capable of cranking out 192 hp and 192 lb-ft of torque. While Honda designed the Accord to be a quiet and comfortable daily driver, some want extra growl from their turbocharged Accord. Luckily, Mishimoto is here to deliver. The Mishimoto Performance Air Intake for your 2018+ 1.5T Accord alleviates restriction in the intake system, starting with our precision rotational-molded airbox and high-flow filter. The airbox helps insulate the filter from engine bay heat, while the enlarged fresh-air inlet increases the flow of cool outside air from between the grille and the hood. The high-flow filter is oiled to protect your precious turbocharger and engine, and washable to ensure long-term performance. Next, we CNC-machined the MAF housing from high-grade aluminum to ensure smooth flow and proper MAF sensor calibration. Our MAF housing, in tandem with our silicone coupler, allows the intake to flow better while maintaining safe air-fuel ratios. Altogether, our improvements to the 1.5T's intake system give the Accord a much-needed attitude adjustment. On top of the added aggressive engine tone, our intake reduces restriction by over 46-percent for max power gains of 7.8 horsepower and 7.2 lb-ft of torque to the wheels. The Mishimoto 2018+ Honda Accord 1.5T Performance Air Intake is a direct fit, with no other modifications or tune needed. And, like all Mishimoto Accord products, this intake includes our Mishimoto Lifetime Warranty for a lifetime of performance.This Part Fits: Year Make Model Submodel 2018-2020 Honda Accord EX 2018-2021 Honda Accord EX-L 2018-2021 Honda Accord LX 2018-2021 Honda Accord Sport 2021 Honda Accord Sport SE 2018 Honda Accord Touring

Add some horsepower and sound to your Nissan 350Z's VQ35DE engine with the new Mishimoto Performance Air Intake. This kit is engineered specifically for your 2003--2006 Nissan 350Z and includes everything needed to replace the restrictive stock airbox. This dyno-proven air intake provides maximum gains of 10 hp and 13 tq over the stock intake while maintaining safe air/fuel ratios. This kit is simple to install, making it perfect for some extra punch on the street or autocross course. The Mishimoto Nissan 350Z Performance Air Intake includes everything needed for installation, installs in under one hour, and works perfectly with the stock tune. The stock MAF housing is retained which translates into a smooth power band with safe air / fuel ratios. To reduce air intake temperatures (IATs), a powder-coated heat shield is placed between the air filter and hot exhaust manifold, significantly reducing heat-soak. The heatshield bolts right up to the stock inlet duct on the front support to draw in the maximum amount of outside air into the filter. The heatshield also comes fully assembled with protective rubber strips to fully seal it from hot engine bay heat and prevent any vibrations during operation. The Mishimoto high-flow air filter features an integrated venturi and center inlet stack for smooth, high velocity airflow. The large filter provides 271-percent greater surface area over stock and provides proper filtration of dirt and debris. The included Mishimoto oiled air filter is completely serviceable, allowing for a lifetime of reliable use. Along with an upgrade in power, this intake also provides an aggressive and deep-sounding intake tone that is a huge improvement over the stock intake. The Mishimoto Nissan 350Z Performance Air Intake is designed in Delaware, USA and includes the Mishimoto Lifetime Warranty.This Part Fits: Year Make Model Submodel 2014-2019 Mini Cooper S 2005 Nissan 350Z 35th Anniversary Edition 2003-2006 Nissan 350Z Base 2003-2006 Nissan 350Z Enthusiast 2005-2006 Nissan 350Z Grand Touring 2003-2005 Nissan 350Z Performance 2003-2006 Nissan 350Z Touring 2003-2006 Nissan 350Z Track

The Mickey Thompson Sportsman S/R is the Undisputed Classic Hot Rod tire. The Sportsman S/R radial is built in our unique Flamed tread pattern. The extra wide rears with matching skinny fronts makes for the best combination available.Technical Bulletin

The Mickey Thompson Sportsman S/R is the Undisputed Classic Hot Rod tire. The Sportsman S/R radial is built in our unique Flamed tread pattern. The extra wide rears with matching skinny fronts makes for the best combination available.Technical Bulletin

The Mickey Thompson Sportsman S/R is the Undisputed Classic Hot Rod tire. The Sportsman S/R radial is built in our unique Flamed tread pattern. The extra wide rears with matching skinny fronts makes for the best combination available.Technical Bulletin

The Mickey Thompson Sportsman S/R is the Undisputed Classic Hot Rod tire. The Sportsman S/R radial is built in our unique Flamed tread pattern. The extra wide rears with matching skinny fronts makes for the best combination available.Technical Bulletin

The Mickey Thompson Sportsman S/R is the Undisputed Classic Hot Rod tire. The Sportsman S/R radial is built in our unique Flamed tread pattern. The extra wide rears with matching skinny fronts makes for the best combination available.Technical Bulletin

The Mickey Thompson Sportsman S/R is the Undisputed Classic Hot Rod tire. The Sportsman S/R radial is built in our unique Flamed tread pattern. The extra wide rears with matching skinny fronts makes for the best combination available.Technical Bulletin

The Mickey Thompson Sportsman S/R is the Undisputed Classic Hot Rod tire. The Sportsman S/R radial is built in our unique Flamed tread pattern. The extra wide rears with matching skinny fronts makes for the best combination available.