The Mishimoto Focus RS Baffled Oil Catch Can is designed and engineered to reduce carbon buildup, a common issue with direct fuel injection engines. Mishimoto engineers found that most vehicles, placing the catch can in the vacuum assisted PCV system of the vehicle will yield the most amount of oil accumulation during normal and aggressive driving. Where a catch can placed on the crankcase vent system on the left side of the engine will yield very little accumulation on stock or lightly modified vehicles. Having only one catch can, tied into the PCV system will, by far, work the best for the vast majority of Ford Focus RSs on the road. The Mishimoto Focus RS catch can kit uses the Mishimoto 2-Port Compact Baffled Oil Catch Can with a bronze filter, and internal baffled to better separate the oil from the crankcase vapors. The kit comes with two direct-fit hoses that connect the catch can with the crankcase and intake manifold. It also includes one direct fit mounting bracket that not only is extremely easy to install but also mounts the can in a serviceable location, right next to the engine's oil drain plug! Two CNC-machined aluminum, 3/8in barb fittings connect the hoses to the can. Like all of our products, this baffled catch can kit comes with the Mishimoto Lifetime Warranty! Our catch cans are different from most air-oil-separator (AOS) systems on a few levels. First, our catch cans are not heated. This means that all of the blow-by is able to condense in the can, including low-octane oil vapors and contaminated fuel vapors. Most AOS systems also drain the blow-by back into the oil pan, while our catch cans trap the blow-by and keep it out of the engine permanently. If you've seen what We've seen in the bottom of our catch cans, you won't want that draining back into your oil either.This Part Fits: Year Make Model Submodel 2016-2018 Ford Focus RS

The 2019+ Ford Ranger is part of a new generation of American trucks. With its direct-injected, turbocharged engine and up to 7,500 lbs. of towing capacity, the 2019+ Ranger is focused on combining efficiency with capability. The 2.3L EcoBoost engine under the hood of the Ranger produces over 310 lb-ft. of torque to let you roam free, but the direct-injection that makes that power possible also places it at risk for carbon buildup. Blow-by is a natural occurrence in any internal-combustion engine, but direct-injected engines are particularly susceptible to the carbon buildup it can cause. Without fuel washing over the back of the engine?s intake valves, blow-by is free to accumulate and the heat of combustion eventually turns that blow-by into hard carbon deposits. As those carbon deposits build up, they rob the 2.3L EcoBoost of air, reducing power and fuel economy. If left completely unchecked, the carbon buildup can get so bad that the engine loses compression and begins to misfire. To help prevent these issues, Mishimoto has developed a direct-fit catch can kit for your 2019+ Ranger 2.3L EcoBoost. Our catch can intercepts the blow-by, preventing it from entering the intake and coating the intake valves. The oil, fuel, and water vapor in the blow-by is condensed by our catch can?s internal baffle and air diverters, while a 50-micron bronze filter on the outlet of the catch can removes carbon and other particulate. This system ensures that the only thing moving through your intake is clean air. As with all our direct-fit catch can kits, this 2019+ Ranger 2.3L EcoBoost catch can kit comes with direct-fit lines and bracket that securely mounts the catch can without any cutting or drilling. Our 2019+Ford Ranger 2.3L EcoBoost catch can is also backed by our Mishimoto Lifetime Warranty for a lifetime of protection.Installation InstructionsThis Part Fits: Year Make Model Submodel 2019-2023 Ford Ranger Lariat 2019-2023 Ford Ranger XL 2019-2023 Ford Ranger XLT

but even icons have their faults. As we saw during development of our 2009-2018 Dodge Ram 1500 5.7L V8 baffled oil catch can kit, the 5.7L Hemi produces a huge amount of blow-by. That blow-by contains oil, fuel, and water vapors that coat your engine's intake components and degrade the quality of the fuel it burns. Over time, the effects of blow-by can grow to the point of causing misfires and destroying sensors. But just like its predecessor, Mishimoto has a solution to save your 2019+ Dodge Ram 1500 5.7L Hemi from the effects of blow-by. Our direct-fit baffled oil catch can kit redirects blow-by away from your intake and into our catch can where harmful oil, fuel, and water vapors are filtered out. Inside our catch can a set of air turbulators help disrupt and slow incoming crankcase gases. Then, a perforated baffle acts as a condensing point for vapors and prevents any liquid from exiting the can. Before the crankcase gases are returned to the intake, our 50-micron sintered bronze filter removes any remaining particles to ensure that only clean air returns to your intake. All of this helps your engine run longer, cleaner, and more efficiently. Like our other direct-fit oil catch can kits, installation of our 2019+ Dodge Ram 1500 5.7L catch can requires no cutting or drilling and fits with your stock engine bay components. Simply attach the can to the supplied direct-fit bracket, bolt it to the truck and route the direct-fit lines to the stock PCV system. Installation takes less than an hour, so your 5.7L Hemi will be running clean in no time. This 2019+ Dodge Ram 1500 5.7L Hemi oil catch can kit is backed by our Mishimoto Lifetime Warranty, so you never have to worry about blow-by in your 5.7L Hemi's intake for as long as you own it.This Part Fits: Year Make Model Submodel 2019-2020 Ram 1500 Big Horn 2019-2020 Ram 1500 Laramie 2019-2020 Ram 1500 Laramie Longhorn 2019-2020 Ram 1500 Limited 2019-2020 Ram 1500 Lone Star 2019-2020 Ram 1500 Rebel 2019-2020 Ram 1500 Tradesman

The classic Hemi from Dodge has always been a great engine. But even Dodge couldn't dodge the dangers of engine blow-by. Mishimoto has you covered with our direct-fit, baffled oil catch can kit for the 2009+ Dodge Ram 5.7L V8. This kit provides excellent protection for your engine, keeping the blow-by down to a minimum and lengthening your engine's need for valve servicing. During testing, we quickly discovered that our standard 2oz can was not enough. The amount of blow-by exceeded the can's capacity in under 1000 miles! We had to switch to a larger, 7.5 oz can, so the intervals between draining would last longer and you'd be able to effectively protect your Hemi. Our billet aluminum 7.5 oz can has internal baffling, air diverters, and a 50-micron bronze filter to keep oil out of your intake and carbon deposits off your valves. The bracket included in each kit is made of very strong and thick steel, so vibration will not be something to worry about. With it bolting directly to your radiator support, you'll have a clean OEM look. This kit installs in under 1 hour, is easily serviceable, and comes with our Mishimoto Lifetime Warranty.This Part Fits: Year Make Model Submodel 2009-2010 Dodge Ram 1500 Laramie 2009-2010 Dodge Ram 1500 SLT 2009-2010 Dodge Ram 1500 Sport 2009-2010 Dodge Ram 1500 ST 2009-2010 Dodge Ram 1500 TRX 2009-2010 Dodge Ram 1500 TRX4 2011-2017 Ram 1500 Big Horn 2012-2017 Ram 1500 Express 2013-2016 Ram 1500 HFE 2011-2017 Ram 1500 Laramie 2014-2015 Ram 1500 Laramie Limited 2011-2017 Ram 1500 Laramie Longhorn 2015-2017 Ram 1500 Limited 2014-2017 Ram 1500 Lone Star 2011-2016 Ram 1500 Outdoorsman 2013 Ram 1500 R/T 2015-2017 Ram 1500 Rebel 2011-2017 Ram 1500 SLT 2014-2017 Ram 1500 Special Service 2011-2017 Ram 1500 Sport 2011-2012 Ram 1500 ST 2011-2017 Ram 1500 Tradesman 2012 Ram 1500 Tradesman HD

Infiniti is no stranger to the luxury sedan segment, taking on the likes of BMW, Mercedes and Audi. With the introduction of their VR30DDTT made the 2016+ Q50 and Q60 into a rocket ship and blasting the manufacturer into the stratosphere alongside the typical posh sedans. Luxury is all about the ability to perform, which is where even the most advanced internal combustion engines still suffer. Luckily, we?re here to keep the blow-by off of those intake valves with the 2016+ Infiniti Q50/Q60 3.0T Direct Fit Catch Can Kit. The powerhouse 3.0T equipped in these InfinIt's is the prime breeding ground for blow-by and carbon build up. With the already high compression ratio, combined with a turbo for each bank and a direct injection fueling system, oil and fuel particles have free range to gum up the intake manifold and valves ultimately diminishing the performance and luxury of your Q50 or Q60. Nestled in the tight engine bay, our 2-port compact catch can design is installed in-line with the VR30DDTT?s PCV system in order to intercept and trap oil and fuel particles from the crankcase before they have the chance to take up residence on the top end components. Our robust mounting bracket places the catch can in an easily accessible location and includes a slotted mounting screw design to take the hassle out of servicing the can. To back up Mishimoto's superior craftsmanship each 2015 Mustang catch can kit comes with the renowned Mishimoto Lifetime Warranty! Our catch cans are different from most air-oil-separator (AOS) systems on a few levels. First, our catch cans are not heated. This means that all of the blow-by is able to condense in the can, including low-octane oil vapors and contaminated fuel vapors. Most AOS systems also drain the blow-by back into the oil pan, while our catch cans trap the blow-by and keep it out of the engine permanently. If you?ve seen what We've seen in the bottom of our catch cans, you won?t want that draining backThis Part Fits: Year Make Model Submodel 2016-2017 INFINITI Q50 Base 2020 INFINITI Q50 Edition 30 2016-2017 INFINITI Q50 Hybrid Premium 2018-2022 INFINITI Q50 Luxe 2016-2017 INFINITI Q50 Premium 2018-2021 INFINITI Q50 Pure 2016-2022 INFINITI Q50 Red Sport 400 2021-2022 INFINITI Q50 Sensory 2019,2021 INFINITI Q50 Signature Edition 2016-2020 INFINITI Q50 Sport 2017 INFINITI Q60 Base 2018-2022 INFINITI Q60 Luxe 2017 INFINITI Q60 Premium 2018-2022 INFINITI Q60 Pure 2017-2022 INFINITI Q60 Red Sport 400 2017-2018 INFINITI Q60 Sport

The Mishimoto BMW N55 Baffled Oil Catch Can is designed and engineered to reduce carbon build-up, a common issue with the direct fuel injection N55 engines. The Mishimoto BMW N55 catch can kit uses proven engineering from the Mishimoto 2-Port Compact Baffled Oil Catch Can, with its bronze filter and internal baffle, to better separate the oil from the crankcase vapors. The engineers at Mishimoto designed a CNC-machined lid that features large inlet and outlet ports in order to match the inner dimension of the CCV hose. This baffled oil catch can will defend your intercooler, intake system, and VANOS system from oil blow-by and help maintain proper octane levels to reduce potential detonation. The kit comes with two direct-fit hoses, which require no modification to the engine cover, and one direct-fit mounting bracket that not only is extremely easy to install, but also mounts the can in a serviceable location! Two CNC-machined aluminum, 3/4in barb fittings connect the hoses to the can. And, like every Mishimoto oil catch can, this baffled catch can kit comes with the Mishimoto Lifetime Warranty! Our catch cans are different from most air-oil-separator (AOS) systems on a few levels. First, our catch cans are not heated. This means that all of the blow-by is able to condense in the can, including low-octane oil vapors and contaminated fuel vapors. Most AOS systems also drain the blow-by back into the oil pan, while our catch cans trap the blow-by and keep it out of the engine permanently. If you've seen what We've seen in the bottom of our catch cans, you won't want that draining back into your oil either.This Part Fits: Year Make Model Submodel 2011-2013 BMW 135i Base 2013 BMW 135is Base 2011-2013 BMW 335i Base 2011-2013 BMW 335i xDrive Base

The Mishimoto BMW N54 Baffled Oil Catch Can is designed and engineered to reduce carbon buildup, a common issue with the direct fuel injection N54 engines. The Mishimoto BMW N54 catch can kit uses the proven engineering from the Mishimoto 2-Port Compact Baffled Oil Catch Can with a bronze filter, and internal baffled to better separate the oil from the crankcase vapors. The engineers at Mishimoto designed a CNC-machined lid which features large inlet/outlets in order to match the inner dimension of the CCV hose. This baffled oil catch can will defend your intercooler, intake system, and VANOS system from oil-blowby and help maintain proper octane levels to reduce potential detonation. The kit comes with two direct-fit hoses, which require no modification to the engine cover, and one direct fit mounting bracket that not only is extremely easy to install but also mounts the can in a serviceable location! Two CNC-machined aluminum, in barb fittings connect the hoses to the can. Like all of our products, this baffled catch can kit comes with the Mishimoto Lifetime Warranty! Our catch cans are different from most air-oil-separator (AOS) systems on a few levels. First, our catch cans are not heated. This means that all of the blow-by is able to condense in the can, including low-octane oil vapors and contaminated fuel vapors. Most AOS systems also drain the blow-by back into the oil pan, while our catch cans trap the blow-by and keep it out of the engine permanently. If you've seen what We've seen in the bottom of our catch cans, you won't want that draining back into your oil either.This Part Fits: Year Make Model Submodel 2011 BMW 1 Series M Base 2008-2010 BMW 135i Base 2007-2010 BMW 335i Base 2009-2010 BMW 335i xDrive Base 2007-2008 BMW 335xi Base

The Mishimoto BMW N20/N26 Baffled Oil Catch Can is designed and engineered to reduce carbon buildup, a common issue with the direct fuel injection N20 and N26 engines. The Mishimoto BMW N20/N26 catch can kit uses the proven engineering from the Mishimoto 2-Port Compact Baffled Oil Catch Can with a bronze filter, and internal baffled to better separate the oil from the crankcase vapors. The engineers at Mishimoto designed a CNC-machined lid which features large inlet/outlets in order to match the inner dimension of the CCV hose. This baffled oil catch can will defend your intercooler, intake system, and VANOS system from oil-blowby and help maintain proper octane levels to reduce potential detonation. The kit comes with two direct-fit hoses, which require no modification to the engine cover, and one direct fit mounting bracket that not only is extremely easy to install but also mounts the can in a serviceable location! Two CNC-machined aluminum, 3/4in barb fittings connect the hoses to the can. Like all of our products, this baffled catch can kit comes with the Mishimoto Lifetime Warranty! Our catch cans are different from most air-oil-separator (AOS) systems on a few levels. First, our catch cans are not heated. This means that all of the blow-by is able to condense in the can, including low-octane oil vapors and contaminated fuel vapors. Most AOS systems also drain the blow-by back into the oil pan, while our catch cans trap the blow-by and keep it out of the engine permanently. If you've seen what We've seen in the bottom of our catch cans, you won't want that draining back into your oil either.This Part Fits: Year Make Model Submodel 2014-2016 BMW 228i Base 2015-2016 BMW 228i xDrive Base 2013-2015 BMW 320i Base 2013-2015 BMW 320i xDrive Base 2012-2016 BMW 328i Base 2014-2016 BMW 328i GT xDrive Base 2012-2016 BMW 328i xDrive Base 2014-2016 BMW 428i Base 2015-2016 BMW 428i Gran Coupe Base 2014-2016 BMW 428i xDrive Base 2015-2016 BMW 428i xDrive Gran Coupe Base

Your 5.0 Coyote engine needs protection now more than ever in your 2018-2023 Mustang GT. With the introduction of direct injection, along with more power in Ford's 3rd Gen Coyote the intake tract is more at risk to the dangers of blow-by. Engine blow-by can cause an oily mess inside intake manifolds and decrease octane levels, potentially increasing chances of detonation. Mishimoto's 2018-2023 Mustang catch can kit features a patent-pending 2-port Compact Baffled Oil Catch Can with a 50-micron bronze filter and an internal baffle to better separate oil from the crankcase vapors. Two direct-fit hoses and an application-specific bracket make for a quick and simple installation. Reducing blow-by becomes even more important with the addition of forced induction, so this 2018-2023 Mustang catch can kit mounts away from most intake and supercharger kits to make room for some more horses. When you're on the road with that 5.0L Coyote, you'll have the peace of mind knowing that blow-by isn't stripping away any of your treasured HP. To back up Mishimoto's superior craftsmanship, each 2018-2023 Mustang catch can kit comes with the renowned Mishimoto Lifetime Warranty! Our catch cans are different from most air-oil-separator (AOS) systems on a few levels. First, our catch cans are not heated. This means that all of the blow-by is able to condense in the can, including low-octane oil vapors and contaminated fuel vapors. Most AOS systems also drain the blow-by back into the oil pan, while our catch cans trap the blow-by and keep it out of the engine permanently. If you've seen what We've seen in the bottom of our catch cans, you won't want that draining back into your oil either.This Part Fits: Year Make Model Submodel 2019-2020 Ford Mustang Bullitt 2015-2023 Ford Mustang GT 2015 Ford Mustang GT 50 Years Limited Edition 2015-2023 Ford Mustang GT Premium 2021-2023 Ford Mustang Mach 1 2015-2020 Ford Mustang Shelby GT350 2015-2020 Ford Mustang Shelby GT350R 2020-2021 Ford Mustang Shelby GT500

As powerful as the Ford Coyote engine is, It'still needs some protection, and the Mishimoto engineers created a baffled catch can kit to do just that. Engine blow-by can cause an oily mess inside intake manifolds and decrease octane levels, potentially increasing chances of detonation. Mishimoto's 2015 Mustang catch can kit features Mishimoto's 2-port Compact Baffled Oil Catch Can with a bronze filter and internal baffle to better separate the oil from the crankcase vapors. Two direct-fit hoses and an application-specific bracket make for a quick and simple installation. Reducing blow-by becomes even more important with the addition of forced induction, so this 2015 Mustang catch can kit mounts away from most intake and supercharger kits to make room for some more horses. When you?re winding out that 5.0L Coyote, you'll have the peace of mind knowing that blow-by isn't stripping any of your treasured HP away. This Mishimoto 2015 Mustang catch can kit increases the aesthetics of your engine bay with direct-fit hoses available in black, blue, or red. To back up Mishimoto's superior craftsmanship each 2015 Mustang catch can kit comes with the renowned Mishimoto Lifetime Warranty! Our catch cans are different from most air-oil-separator (AOS) systems on a few levels. First, our catch cans are not heated. This means that all of the blow-by is able to condense in the can, including low-octane oil vapors and contaminated fuel vapors. Most AOS systems also drain the blow-by back into the oil pan, while our catch cans trap the blow-by and keep it out of the engine permanently. If you've seen what We've seen in the bottom of our catch cans, you won't want that draining back into your oil either.This Part Fits: Year Make Model Submodel 2015-2017 Ford Mustang EcoBoost 2015-2017 Ford Mustang EcoBoost Premium 2015-2017 Ford Mustang GT 2015 Ford Mustang GT 50 Years Limited Edition 2015-2017 Ford Mustang GT Premium 2015-2017 Ford Mustang Shelby GT350 2015-2017 Ford Mustang Shelby GT350R 2015-2017 Ford Mustang V6

The 2011-2014 Ford Mustang GT is a great car with a great engine. But even with all its modern performance, It'still suffers from the adverse effects of oil bow-by. Our direct-fit catch can kit is designed and engineered to reduce carbon buildup, which is common with direct-injection engines. This catch can taps into the PCV system of the V8 Coyote for the best protection and blow-by collection as it yields the most accumulation through both normal and aggressive driving. This kit uses our 2-port baffled oil catch can. Inside each can is an internal air diverter to slow down incoming air for more effective air-oil separation, along with a 50 micron-bronze filter and an aluminum baffle to keep oil from being sucked back into the system. The rubber lines coming from the can include Ford's factory quick-disconnect fittings for easy installation. The mounting bracket is made of thick steel, securely mounts to the strut tower, and allows for easy servicing of the can. With absolutely no other modifications required for installation and our Mishimoto Lifetime Warranty included with every kit, the baffled oil catch can makes for an excellent addition to your S197 Mustang!This Part Fits: Year Make Model Submodel 2011-2014 Ford Mustang Base 2012-2013 Ford Mustang Boss 302 2011-2014 Ford Mustang GT 2011-2014 Ford Mustang Shelby GT500

This Mishimoto baffled oil catch can kit is engineered to reduce carbon buildup in your 2015-2023 Ford Mustang EcoBoost, a common issue with direct-injected engines. Our direct-fit catch can kit taps into the PCV system of the vehicle to capture maximum blow-by during normal and aggressive driving. It utilizes our patented 2-Port compact baffled oil catch can, complete with a bronze filter and internal baffles to better separate the oil, fuel, and water from the crankcase gasses, ensuring only clean air returns to your intake system. Our catch can is fully serviceable, meaning you don't have to worry about replacing filter media, ever. Just disassemble the catch can, clean it with soapy water, and reassemble.----The kit comes with two direct-fit hoses and preassembled quick-disconnect fittings for easy installation. It also includes a direct-fit mounting bracket that not only is extremely easy to install, but also mounts the can in a serviceable location in your EcoBoost Mustang's engine bay for easy draining. Two CNC-machined aluminum fittings connect the hoses to the can for reliable, leak-free performance. Like all Mishimoto EcoBoost Mustang parts, this 2015-2023 Ford Mustang EcoBoost baffled oil catch can kit is backed by our Mishimoto Lifetime Warranty.---- Our catch cans are different from most air-oil-separator (AOS) systems on a few levels. First, our catch cans are not heated. This means that all the blow-by condenses in the can, including low-octane oil vapors and contaminated fuel vapors. Most AOS systems also drain the blow-by back into the oil pan, while our catch cans trap the blow-by and keep it out of the engine permanently. If you've seen what we've seen in the bottom of our catch cans, you won't want that draining back into your oil either.This Part Fits: Year Make Model Submodel 2019-2020 Ford Mustang Bullitt 2015-2021 Ford Mustang EcoBoost 2015-2021 Ford Mustang EcoBoost Premium 2015-2021 Ford Mustang GT 2015 Ford Mustang GT 50 Years Limited Edition 2015-2021 Ford Mustang GT Premium 2021 Ford Mustang Mach 1 2015-2020 Ford Mustang Shelby GT350 2015-2020 Ford Mustang Shelby GT350R 2020-2021 Ford Mustang Shelby GT500 2015-2017 Ford Mustang V6

Add a layer of protection to your 2007-2013 Mazdaspeed 3 with the Mishimoto Baffled Oil Catch Can Kit. While the MS3 might have been one of the pioneers in the North American hot-hatch renaissance in the mid-2000s, but like the rest of the direct injected turbo charged engines of that era, It'suffered from copious carbon build up due to engine blow-by. The 2.3L MZR turbo also has a unique issue with blow-by as It's equipped with a top-mounted intercooler which is prone to heat soak effectively baking in all of the oil and fuel droplets into the heat exchanger. With the Mishimoto Baffled Oil Catch Can Kit, those crank-case gases are intercepted before even reaching the intercooler in the 6061-billet aluminum can. We also included our taller 7.5 oz. catch can to compensate for the increased levels of blow-by that the Mazdaspeed 3 experiences in colder weather. Also included in the kit are pre-formed hoses along with all of the necessary mounting hardware to ensure a simple, and direct fit to your MS3. As with all of our products, the Mazdaspeed 3 Baffled Oil Catch Can Kit is covered under the Mishimoto Lifetime Warranty, keeping your 2.3L MZR Turbo blow-by free over the lifetime of the car.This Part Fits: Year Make Model Submodel 2007-2013 Mazda 3 Mazdaspeed

Give your 6.4L Hemi the protection it deserves with the Mishimoto Direct Fit catch can specifically designed for the 2015+ Dodge Charger. This monstrous V8 packs a serious punch meaning that it also produces a significant amount of blow-by, which over time will build carbon on the intake components and throttle your muscle car?s power and efficiency as a result. Our catch can kit installs in line with the PCV system using an application specific bracket and chemical resistant, OEM styled hoses to intercept the contaminated crankcase pressure before making its way to the intake tract. Our tired and true compact catch can features an internal baffle designed to aid in the condensation of oil droplets and fuel vapors, sending only clean air back through the Hemi. As an added line of protection, our cans include a 50 micron bronze filter to capture any rogue blow-by droplets without sacrificing flow. Finally, our 3 oz. cans and CNC-machined aluminum fittings are sealed with Viton O-rings to ensure that all collected blow-by stays in the can. Our Mopar 6.4L catch can kit is available with the option of a black or polished can, and includes the Mishimoto Lifetime Warranty. Our catch cans are different from most air-oil-separator (AOS) systems on a few levels. First, our catch cans are not heated. This means that all of the blow-by is able to condense in the can, including low-octane oil vapors and contaminated fuel vapors. Most AOS systems also drain the blow-by back into the oil pan, while our catch cans trap the blow-by and keep it out of the engine permanently. If you?ve seen what We've seen in the bottom of our catch cans, you won?t want that draining back into your oil either.This Part Fits: Year Make Model Submodel 2017-2018 Dodge Charger Daytona 2017-2018 Dodge Charger Daytona 392 2018 Dodge Charger GT 2018 Dodge Charger GT Plus 2015-2018 Dodge Charger Pursuit 2015-2018 Dodge Charger R/T 2017-2018 Dodge Charger R/T 392 2015-2016 Dodge Charger R/T Road & Track 2015-2018 Dodge Charger R/T Scat Pack 2015-2017 Dodge Charger SE 2015-2018 Dodge Charger SRT 392 2015-2018 Dodge Charger SRT Hellcat 2015-2018 Dodge Charger SXT 2018 Dodge Charger SXT Plus 2018 Dodge Charger SXT Plus Leather

Give your 6.4L Hemi the protection it deserves with the Mishimoto Direct Fit catch can specifically designed for the 2012-2014 Dodge Charger. This monstrous V8 packs a serious punch meaning that it also produces a significant amount of blow-by, which over time will build carbon on the intake components and throttle your muscle car?s power and efficiency as a result. Our catch can kit installs in line with the PCV system using an application specific bracket and chemical resistant, OEM styled hoses to intercept the contaminated crankcase pressure before making its way to the intake tract. Our tired and true compact catch can features an internal baffle designed to aid in the condensation of oil droplets and fuel vapors, sending only clean air back through the Hemi. As an added line of protection, our cans include a 50 micron bronze filter to capture any rogue blow-by droplets without sacrificing flow. Finally, our 3 oz. cans and CNC-machined aluminum fittings are sealed with Viton O-rings to ensure that all collected blow-by stays in the can. Our Mopar 6.4L catch can kit is available with the option of a black or polished can, and includes the Mishimoto Lifetime Warranty. Our catch cans are different from most air-oil-separator (AOS) systems on a few levels. First, our catch cans are not heated. This means that all of the blow-by is able to condense in the can, including low-octane oil vapors and contaminated fuel vapors. Most AOS systems also drain the blow-by back into the oil pan, while our catch cans trap the blow-by and keep it out of the engine permanently. If you?ve seen what We've seen in the bottom of our catch cans, you won?t want that draining back into your oil either.This Part Fits: Year Make Model Submodel 2012-2014 Chrysler 300 Base 2012-2014 Chrysler 300 C 2012-2014 Chrysler 300 C Luxury 2012 Chrysler 300 Limited 2012-2014 Chrysler 300 S 2012-2014 Chrysler 300 SRT8 2013 Chrysler 300 SRT8 Core 2012-2014 Dodge Charger Pursuit 2012-2014 Dodge Charger R/T 2012-2014 Dodge Charger SE 2012-2014 Dodge Charger SRT8 2012-2014 Dodge Charger SXT 2012 Dodge Charger SXT Plus

Give your 5.7L Hemi the protection it deserves with the Mishimoto Direct Fit catch can specifically designed for the 2015+ Dodge Charger. Even though It's the ?baby? V8 in Mopar?s line-up, the 5.7L still packs quite the punch. It also produces a significant amount of blow-by, which over time will build carbon on the intake components and throttle your muscle car?s power and efficiency as a result. Our catch can kit installs in line with the PCV system using an application specific bracket and chemical resistant, OEM styled hoses to intercept the contaminated crankcase pressure before making its way to the intake tract. Our tired and true compact catch can features an internal baffle designed to aid in the condensation of oil droplets and fuel vapors, sending only clean air back through the Hemi. As an added line of protection, our cans include a 50 micron bronze filter to capture any rogue blow-by droplets without sacrificing flow. Finally, our 3 oz. cans and CNC-machined aluminum fittings are sealed with Viton O-rings to ensure that all collected blow-by stays in the can. Our Mopar 5.7L catch can kit is available with the option of a black or polished can, and includes the Mishimoto Lifetime Warranty. Our catch cans are different from most air-oil-separator (AOS) systems on a few levels. First, our catch cans are not heated. This means that all of the blow-by is able to condense in the can, including low-octane oil vapors and contaminated fuel vapors. Most AOS systems also drain the blow-by back into the oil pan, while our catch cans trap the blow-by and keep it out of the engine permanently. If you?ve seen what We've seen in the bottom of our catch cans, you won?t want that draining back into your oil either.This Part Fits: Year Make Model Submodel 2015-2018 Chrysler 300 C 2015-2017 Chrysler 300 C Platinum 2015-2018 Chrysler 300 Limited 2015-2018 Chrysler 300 S 2018 Chrysler 300 Touring 2018 Chrysler 300 Touring L 2017-2018 Dodge Charger Daytona 2017-2018 Dodge Charger Daytona 392 2018 Dodge Charger GT 2018 Dodge Charger GT Plus 2015-2018 Dodge Charger Pursuit 2015-2018 Dodge Charger R/T 2017-2018 Dodge Charger R/T 392 2015-2016 Dodge Charger R/T Road & Track 2015-2018 Dodge Charger R/T Scat Pack 2015-2017 Dodge Charger SE 2015-2018 Dodge Charger SRT 392 2015-2018 Dodge Charger SRT Hellcat 2015-2018 Dodge Charger SXT 2018 Dodge Charger SXT Plus 2018 Dodge Charger SXT Plus Leather

Give your 5.7L Hemi the protection it deserves with the Mishimoto Direct Fit catch can specifically designed for the 2005-2014 Dodge Charger and Magnum, 2008-2014 Dodge Challenger, and 2004-2014 Chrysler 300C. Even though It's the ?baby? V8 in Mopar?s line-up, the 5.7L still packs quite the punch. It also produces a significant amount of blow-by, which over time will build carbon on the intake components and throttle your muscle car?s power and efficiency as a result. Our catch can kit installs in line with the PCV system using an application specific bracket and chemical resistant, OEM styled hoses to intercept the contaminated crankcase pressure before making its way to the intake tract. Our tired and true compact catch can features an internal baffle designed to aid in the condensation of oil droplets and fuel vapors, sending only clean air back through the Hemi. As an added line of protection, our cans include a 50 micron bronze filter to capture any rogue blow-by droplets without sacrificing flow. Finally, our 3 oz. cans and CNC-machined aluminum fittings are sealed with Viton O-rings to ensure that all collected blow-by stays in the can. Our Mopar 5.7L catch can kit is available with the option of a black or polished can, and includes the Mishimoto Lifetime Warranty. Our catch cans are different from most air-oil-separator (AOS) systems on a few levels. First, our catch cans are not heated. This means that all of the blow-by is able to condense in the can, including low-octane oil vapors and contaminated fuel vapors. Most AOS systems also drain the blow-by back into the oil pan, while our catch cans trap the blow-by and keep it out of the engine permanently. If you?ve seen what We've seen in the bottom of our catch cans, you won?t want that draining back into your oil either.This Part Fits: Year Make Model Submodel 2005-2007,2011-2014 Chrysler 300 Base 2005-2014 Chrysler 300 C 2012-2014 Chrysler 300 C Luxury 2005-2010 Chrysler 300 C SRT8 2005-2012 Chrysler 300 Limited 2008-2009 Chrysler 300 LX 2010,2012-2014 Chrysler 300 S 2009 Chrysler 300 Signature Series 2012-2014 Chrysler 300 SRT8 2013 Chrysler 300 SRT8 Core 2005-2010 Chrysler 300 Touring 2006-2007 Dodge Charger Base 2006 Dodge Charger Daytona R/T 2006-2014 Dodge Charger Pursuit 2006-2014 Dodge Charger R/T 2006-2014 Dodge Charger SE 2006-2010,2012-2014 Dodge Charger SRT8 2006-2010,2012-2014 Dodge Charger SXT 2012 Dodge Charger SXT Plus 2005-2008 Dodge Magnum R/T 2005-2008 Dodge Magnum SE 2006-2008 Dodge Magnum SRT8 2005-2008 Dodge Magnum SXT 2005 Dodge Magnum SXT Special Edition

With the release of the new 2016 Mazda Miata, the Mishimoto engineers are hard at work looking for ways to improve engine efficiency. They created this new direct-fit Miata oil catch can system to help protect the heart of your Miata from harmful blow-by. Direct injection engines, like the one in the 2016 Miata, suffer from accelerated carbon build up due to the lack of port injection, which washes the valves with fuel during engine operation. The engineers saw a significant coating of oil build up while examining the intake manifold. The oil was coming from the PCV system, which contributed to carbon accumulation and a decrease in octane levels. Mishimoto's new Miata catch can system helps to prevent this blow-by from reaching the intake, resulting in a cleaner running engine. Mishimoto's Mazda Miata oil catch can kit features Mishimoto's 2-port Compact Baffled Oil Catch Can with a bronze filter and internal baffle to better separate the oil from the crankcase vapors. Two direct-fit hoses and an application-specific bracket make for a quick and simple installation. Like all Mishimoto ND Miata parts, this catch can kit comes with the Mishimoto Lifetime Warranty! Our catch cans are different from most air-oil-separator (AOS) systems on a few levels. First, our catch cans are not heated. This means that all of the blow-by is able to condense in the can, including low-octane oil vapors and contaminated fuel vapors. Most AOS systems also drain the blow-by back into the oil pan, while our catch cans trap the blow-by and keep it out of the engine permanently. If you've seen what We've seen in the bottom of our catch cans, you won't want that draining back into your oil either.This Part Fits: Year Make Model Submodel 2016-2020 Mazda MX-5 Miata Club 2016-2020 Mazda MX-5 Miata Grand Touring 2017-2020 Mazda MX-5 Miata RF Club 2017-2020 Mazda MX-5 Miata RF Grand Touring 2016-2020 Mazda MX-5 Miata Sport

There's nothing worse than getting your 2018+ Jeep Wrangler JL halfway up a rock face, looking back to see your friendsft reactions, and seeing nothing but blue smoke. The 3.6L Pentastar is notorious for excessive amounts of blow-by entering the intake. This blow-by carries oil, fuel, and water vapor left over from combustion and too much of it causes smoking on inclines and while driving. This blow-by can also coat sensors and other intake components, reducing the performance of your engine and potentially causing knock. But Mishimoto has the solution. Our 2018+ Jeep Wrangler JL 3.6L direct-fit baffled oil catch can kit protects your engine by keeping blow-by out of the intake. This allows your engine to burn only the high-quality gas that you put in the tank. Our catch can employs a series of air turbulators, a baffle, and 50-micron bronze filter to clean the blow-by of vapors before it returns to your intake. This catch can kit is a direct fit for your Wrangler, with no cutting or other modifications required. Installation of this catch can takes less than an hour thanks to the pre-cut hoses and installed stock quick-disconnects. A custom engineered 2.5mm steel bracket mounts our catch can to the fender rail, isolating it from engine vibration and movement for a lifetime of service. Also included with this catch can is a drain kit. Simply remove the plug from the bottom of the catch can and connect the drain kit to empty the catch can from behind the front wheel, without having to open the hood. This convenient feature lets you drain the can and get out on the road or trail in minutes. The included rubber cap prevents dirt and debris from entering the valve, so you never have to worry about clogged valve slowing you down. Like all Mishimoto product, this 2018+ Jeep Wrangler JL 3.6L baffled oil catch can kit is protected by our Mishimoto Lifetime Warranty. So, whether you?re climbing a treacherous rock face, exploring the wilderness, or just driving to work, yThis Part Fits: Year Make Model Submodel 2021 Jeep Gladiator 80th Anniversary 2020 Jeep Gladiator Altitude 2021-2022 Jeep Gladiator High Altitude 2020 Jeep Gladiator Launch Edition 2020-2022 Jeep Gladiator Mojave 2020-2022 Jeep Gladiator Overland 2020-2022 Jeep Gladiator Rubicon 2020-2022 Jeep Gladiator Sport 2020-2022 Jeep Gladiator Sport S 2021-2022 Jeep Gladiator Willys 2021-2022 Jeep Gladiator Willys Sport 2021 Jeep Wrangler 80th Anniversary 2021 Jeep Wrangler Freedom 2021 Jeep Wrangler Islander 2018-2021 Jeep Wrangler Rubicon 2018-2021 Jeep Wrangler Sport 2018-2021 Jeep Wrangler Sport S 2021 Jeep Wrangler Unlimited 80th Anniversary 2021 Jeep Wrangler Unlimited Freedom 2021 Jeep Wrangler Unlimited High Altitude 2021 Jeep Wrangler Unlimited High Altitude 4xe 2021 Jeep Wrangler Unlimited Islander 2018-2019 Jeep Wrangler Unlimited Moab 2018-2021 Jeep Wrangler Unlimited Rubicon 2021 Jeep Wrangler Unlimited Rubicon 392 2021 Jeep Wrangler Unlimited Rubicon 4xe 2018-2021 Jeep Wrangler Unlimited Sahara 2021 Jeep Wrangler Unlimited Sahara 4xe 2021 Jeep Wrangler Unlimited Sahara Altitude 2018-2021 Jeep Wrangler Unlimited Sport 2021 Jeep Wrangler Unlimited Sport Altitude 2018-2021 Jeep Wrangler Unlimited Sport S 2021 Jeep Wrangler Unlimited Willys 2021 Jeep Wrangler Unlimited Willys Sport 2021 Jeep Wrangler Willys 2021 Jeep Wrangler Willys Sport 2018 Jeep Wrangler JK Rubicon 2018 Jeep Wrangler JK Sahara 2018 Jeep Wrangler JK Sport 2018 Jeep Wrangler JK Sport S 2018 Jeep Wrangler JK Unlimited Rubicon 2018 Jeep Wrangler JK Unlimited Sahara 2018 Jeep Wrangler JK Unlimited Sport 2018 Jeep Wrangler JK Unlimited Sport S

The direct-injected and turbocharged 2.0L Hurricane engine found in the 2018-2023 Jeep Wrangler JL is the most advanced engine ever fitted to a Wrangler. But, despite all the high-tech features that make the Hurricane great, It's still vulnerable to a very low-tech problem: blow-by. The fuel efficiency and increased power of direct injection comes with the threat of carbon buildup. As fuel and air get squeezed in the cylinder, some of the mixture leaks past the piston rings and carries oil from the cylinder walls with it. This mixture is known as blow-by. To prevent crankcase pressure from building up, the blow-by is then vented into the intake to be reburned. Blow-by becomes an issue with direct-injected engines when it passes the intake valves. Without fuel spraying over the valve, There's nothing to wash off the blow-by and heat from combustion eventually causes it to build up as carbon on the back of the intake valves. That carbon buildup prevents valves from closing fully and disrupts airflow. The result is poor running, misfires and, if left long enough, engine damage. The best solution to the problem of blow-by buildup is prevention. Instead of letting blow-by enter the intake, the Mishimoto 2018-2023 Jeep Wrangler JL 2.0L direct-fit baffled oil catch can kit diverts it away from the intake valves and into a 7.5 oz catch can. You can then recycle the contents of the catch can with your next oil change. The internal air diverters and baffle of our catch can thoroughly condense oil, fuel, and water vapor so that the only air flowing through your intake is fresh air. In addition, our direct-fit lines and high-flow filter ensure CEL-free running. Like all Mishimoto products, this 2018-2023 Jeep Wrangler JL 2.0L catch can kit is protected by our Mishimoto Lifetime Warranty, so your JL can also be protected from blow-by for a lifetime.This Part Fits: Year Make Model Submodel 2021 Jeep Wrangler 80th Anniversary 2021 Jeep Wrangler Freedom 2021 Jeep Wrangler Islander 2018-2021 Jeep Wrangler Rubicon 2018-2021 Jeep Wrangler Sport 2018-2021 Jeep Wrangler Sport S 2021 Jeep Wrangler Unlimited 80th Anniversary 2021 Jeep Wrangler Unlimited Freedom 2021 Jeep Wrangler Unlimited High Altitude 2021 Jeep Wrangler Unlimited High Altitude 4xe 2021 Jeep Wrangler Unlimited Islander 2018-2019 Jeep Wrangler Unlimited Moab 2018-2021 Jeep Wrangler Unlimited Rubicon 2021 Jeep Wrangler Unlimited Rubicon 392 2021 Jeep Wrangler Unlimited Rubicon 4xe 2018-2021 Jeep Wrangler Unlimited Sahara 2021 Jeep Wrangler Unlimited Sahara 4xe 2021 Jeep Wrangler Unlimited Sahara Altitude 2018-2021 Jeep Wrangler Unlimited Sport 2021 Jeep Wrangler Unlimited Sport Altitude 2018-2021 Jeep Wrangler Unlimited Sport S 2021 Jeep Wrangler Unlimited Willys 2021 Jeep Wrangler Unlimited Willys Sport 2021 Jeep Wrangler Willys 2021 Jeep Wrangler Willys Sport

High-output engines require high-flow crankcase ventilation. More air and fuel going into the cylinder means more blow-by working its way past the piston rings and traveling around your intake system. All that volume needs room to flow, and if you're using a catch can, it better flow well too. Luckily, Mishimoto has created a catch can that meets those needs. Our high-flow catch can utilizes a high-capacity bottom with a 5.3 fl. oz. capacity. The CNC-machined lid includes large, M27 x 2.0 inlets and outlets to let your crankcase breathe. Inside the can is a newly engineered, CNC-machined baffle with integrated filter that lets crankcase gases flow through while filtering out potentially harmful fuel, oil, and water vapors. Like our compact baffled oil catch can, our high-flow catch can and filter are fully serviceable for easy draining and cleaning. The included 3/8ft NPT plug in the bottom of the can allows you to drain the can without removing the bottom or attach our available drain kit for even easier servicing. Also included with this kit is a universal bracket and mounting hardware to locate the catch can in the most convenient and secure location. Of course, all our catch can kits come with Mishimoto's Lifetime Warranty with Accident Protection, and this kit is no exception.

The Mishimoto Focus ST Baffled Oil Catch Can is designed and engineered to reduce carbon buildup, a common issue with direct fuel injection engines. Mishimoto engineers found that most vehicles, placing the catch can in the vacuum assisted PCV system of the vehicle will yield the most amount of oil accumulation during normal and aggressive driving. Where a catch can placed on the crankcase vent system on the left side of the engine will yield very little accumulation on stock or lightly modified vehicles. Having only one catch can, tied into the PCV system will, by far, work the best for the vast majority of Ford Focus STs on the road. The Mishimoto Focus ST catch can kit uses the Mishimoto 2-Port Compact Baffled Oil Catch Can with a bronze filter, and internal baffled to better separate the oil from the crankcase vapors. The kit comes with two direct-fit hoses that connect the catch can with the crankcase and intake manifold. It also includes one direct fit mounting bracket that not only is extremely easy to install but also mounts the can in a serviceable location, right next to the engine's oil drain plug! Two CNC-machined aluminum, 3/8in barb fittings connect the hoses to the can. Like all of our products, this baffled catch can kit comes with the Mishimoto Lifetime Warranty! Our catch cans are different from most air-oil-separator (AOS) systems on a few levels. First, our catch cans are not heated. This means that all of the blow-by is able to condense in the can, including low-octane oil vapors and contaminated fuel vapors. Most AOS systems also drain the blow-by back into the oil pan, while our catch cans trap the blow-by and keep it out of the engine permanently. If you've seen what We've seen in the bottom of our catch cans, you won't want that drainingThis Part Fits: Year Make Model Submodel 2013-2018 Ford Focus ST

The Mishimoto Ford Fiesta ST Baffled Oil Catch Can is designed and engineered to reduce carbon buildup, a common issue with direct fuel injection engines. Thousands of test miles were logged on our Fiesta ST to determine what can setup would work the best. Mishimoto engineers found that most vehicles, placing the catch can in the vacuum assisted PCV system of the vehicle will yield the most amount of oil accumulation during normal and aggressive driving. Where a catch can placed on the crankcase vent system on the left side of the engine will yield nearly no accumulation on stock or lightly modified vehicles. Having only one catch can, tied into the PCV system will, by far, work the best for the vast majority of Fiesta ST's on the road. The Mishimoto Ford Fiesta ST catch can kit uses the Mishimoto 2-Port Compact Baffled Oil Catch Can with a bronze filter, and internal baffled to better separate the oil from the crankcase vapors. The kit comes with two direct-fIt'silicone hoses with pre-assembled quick-disconnect fittings for a simple installation. It also includes one direct fit mounting bracket that not only is extremely easy to install but also mounts the can in a serviceable location! Two CNC-machined aluminum, in barb fittings connect the hoses to the can. Like all of our products, this baffled catch can kit comes with the Mishimoto Lifetime Warranty! Our catch cans are different from most air-oil-separator (AOS) systems on a few levels. First, our catch cans are not heated. This means that all of the blow-by is able to condense in the can, including low-octane oil vapors and contaminated fuel vapors. Most AOS systems also drain the blow-by back into the oil pan, while our catch cans trap the blow-by and keep it out of the engine permanently. If you've seen what We've seen in the bottom of our catch cans, you won't want that draining back into your oil either.This Part Fits: Year Make Model Submodel 2014-2019 Ford Fiesta ST

Give your 2015-2020 BMW M3/M4 the protection it deserves with the Mishimoto Baffled Oil Catch Can Kit. The introduction of the S55 into the M3 and M4 in 2015 was the first time compact M’s saw turbos from the factory, but these engines brought along another long-standing tradition-blow-by. The Mishimoto BMW M3/M4 catch can kit uses proven engineering from the patent pending Mishimoto 2-Port Compact Baffled Oil Catch Can, with its 50-micron bronze filter and internal baffle, to better separate the oil from the crankcase vapors. The engineers at Mishimoto designed a CNC-machined lid that features large inlet and outlet ports to match the inner dimension of the CCV hose. This baffled oil catch can defends your intercooler, intake system, and VANOS system from oil blow-by and helps maintain proper octane levels to reduce potential detonation. The kit comes with two direct-fit hoses, which require no modification to the engine cover, and one direct-fit billet aluminum mounting bracket that is extremely easy to install and mounts the can in a serviceable location! Available with a color-matched bracket. Choose from 12 BMW specific color-matched options or classic black. Two aluminum, 3/4" barb fittings connect the hoses to the can. And, like every Mishimoto oil catch can, this baffled catch can kit comes with the Mishimoto Lifetime Warranty! Our catch cans are different from most air-oil-separator (AOS) systems on a few levels. First, our catch cans are not heated. This means that all of the blow-by is able to condense in the can, including low-octane oil vapors and contaminated fuel vapors. Most AOS systems also drain the blow-by back into the oil pan, while our catch cans trap the blow-by and keep it out of the engine permanently. If you’ve seen what we’ve seen in the bottom of our catch cans, you won’t want that draining back into your oil either.This Part Fits: Year Make Model Submodel 2019-2020 BMW M2 Competition 2015-2018 BMW M3 Base 2015-2020 BMW M4 Base 2019-2020 BMW M4 CS 2016 BMW M4 GTS

Give your 2015-2020 BMW M3/M4 the protection it deserves with the Mishimoto Baffled Oil Catch Can Kit. The introduction of the S55 into the M3 and M4 in 2015 was the first time compact M’s saw turbos from the factory, but these engines brought along another long-standing tradition-blow-by. The Mishimoto BMW M3/M4 catch can kit uses proven engineering from the patent pending Mishimoto 2-Port Compact Baffled Oil Catch Can, with its 50-micron bronze filter and internal baffle, to better separate the oil from the crankcase vapors. The engineers at Mishimoto designed a CNC-machined lid that features large inlet and outlet ports to match the inner dimension of the CCV hose. This baffled oil catch can defends your intercooler, intake system, and VANOS system from oil blow-by and helps maintain proper octane levels to reduce potential detonation. The kit comes with two direct-fit hoses, which require no modification to the engine cover, and one direct-fit billet aluminum mounting bracket that is extremely easy to install and mounts the can in a serviceable location! Available with a color-matched bracket. Choose from 12 BMW specific color-matched options or classic black. Two aluminum, 3/4" barb fittings connect the hoses to the can. And, like every Mishimoto oil catch can, this baffled catch can kit comes with the Mishimoto Lifetime Warranty! Our catch cans are different from most air-oil-separator (AOS) systems on a few levels. First, our catch cans are not heated. This means that all of the blow-by is able to condense in the can, including low-octane oil vapors and contaminated fuel vapors. Most AOS systems also drain the blow-by back into the oil pan, while our catch cans trap the blow-by and keep it out of the engine permanently. If you’ve seen what we’ve seen in the bottom of our catch cans, you won’t want that draining back into your oil either.This Part Fits: Year Make Model Submodel 2019-2020 BMW M2 Competition 2015-2018 BMW M3 Base 2015-2020 BMW M4 Base 2019-2020 BMW M4 CS 2016 BMW M4 GTS

Give your 2015-2020 BMW M3/M4 the protection it deserves with the Mishimoto Baffled Oil Catch Can Kit. The introduction of the S55 into the M3 and M4 in 2015 was the first time compact M’s saw turbos from the factory, but these engines brought along another long-standing tradition-blow-by. The Mishimoto BMW M3/M4 catch can kit uses proven engineering from the patent pending Mishimoto 2-Port Compact Baffled Oil Catch Can, with its 50-micron bronze filter and internal baffle, to better separate the oil from the crankcase vapors. The engineers at Mishimoto designed a CNC-machined lid that features large inlet and outlet ports to match the inner dimension of the CCV hose. This baffled oil catch can defends your intercooler, intake system, and VANOS system from oil blow-by and helps maintain proper octane levels to reduce potential detonation. The kit comes with two direct-fit hoses, which require no modification to the engine cover, and one direct-fit billet aluminum mounting bracket that is extremely easy to install and mounts the can in a serviceable location! Available with a color-matched bracket. Choose from 12 BMW specific color-matched options or classic black. Two aluminum, 3/4" barb fittings connect the hoses to the can. And, like every Mishimoto oil catch can, this baffled catch can kit comes with the Mishimoto Lifetime Warranty! Our catch cans are different from most air-oil-separator (AOS) systems on a few levels. First, our catch cans are not heated. This means that all of the blow-by is able to condense in the can, including low-octane oil vapors and contaminated fuel vapors. Most AOS systems also drain the blow-by back into the oil pan, while our catch cans trap the blow-by and keep it out of the engine permanently. If you’ve seen what we’ve seen in the bottom of our catch cans, you won’t want that draining back into your oil either.This Part Fits: Year Make Model Submodel 2019-2020 BMW M2 Competition 2015-2018 BMW M3 Base 2015-2020 BMW M4 Base 2019-2020 BMW M4 CS 2016 BMW M4 GTS

Give your 2015-2020 BMW M3/M4 the protection it deserves with the Mishimoto Baffled Oil Catch Can Kit. The introduction of the S55 into the M3 and M4 in 2015 was the first time compact M’s saw turbos from the factory, but these engines brought along another long-standing tradition-blow-by. The Mishimoto BMW M3/M4 catch can kit uses proven engineering from the patent pending Mishimoto 2-Port Compact Baffled Oil Catch Can, with its 50-micron bronze filter and internal baffle, to better separate the oil from the crankcase vapors. The engineers at Mishimoto designed a CNC-machined lid that features large inlet and outlet ports to match the inner dimension of the CCV hose. This baffled oil catch can defends your intercooler, intake system, and VANOS system from oil blow-by and helps maintain proper octane levels to reduce potential detonation. The kit comes with two direct-fit hoses, which require no modification to the engine cover, and one direct-fit billet aluminum mounting bracket that is extremely easy to install and mounts the can in a serviceable location! Available with a color-matched bracket. Choose from 12 BMW specific color-matched options or classic black. Two aluminum, 3/4" barb fittings connect the hoses to the can. And, like every Mishimoto oil catch can, this baffled catch can kit comes with the Mishimoto Lifetime Warranty! Our catch cans are different from most air-oil-separator (AOS) systems on a few levels. First, our catch cans are not heated. This means that all of the blow-by is able to condense in the can, including low-octane oil vapors and contaminated fuel vapors. Most AOS systems also drain the blow-by back into the oil pan, while our catch cans trap the blow-by and keep it out of the engine permanently. If you’ve seen what we’ve seen in the bottom of our catch cans, you won’t want that draining back into your oil either.This Part Fits: Year Make Model Submodel 2019-2020 BMW M2 Competition 2015-2018 BMW M3 Base 2015-2020 BMW M4 Base 2019-2020 BMW M4 CS 2016 BMW M4 GTS

Give your 2015-2020 BMW M3/M4 the protection it deserves with the Mishimoto Baffled Oil Catch Can Kit. The introduction of the S55 into the M3 and M4 in 2015 was the first time compact M’s saw turbos from the factory, but these engines brought along another long-standing tradition-blow-by. The Mishimoto BMW M3/M4 catch can kit uses proven engineering from the patent pending Mishimoto 2-Port Compact Baffled Oil Catch Can, with its 50-micron bronze filter and internal baffle, to better separate the oil from the crankcase vapors. The engineers at Mishimoto designed a CNC-machined lid that features large inlet and outlet ports to match the inner dimension of the CCV hose. This baffled oil catch can defends your intercooler, intake system, and VANOS system from oil blow-by and helps maintain proper octane levels to reduce potential detonation. The kit comes with two direct-fit hoses, which require no modification to the engine cover, and one direct-fit billet aluminum mounting bracket that is extremely easy to install and mounts the can in a serviceable location! Available with a color-matched bracket. Choose from 12 BMW specific color-matched options or classic black. Two aluminum, 3/4" barb fittings connect the hoses to the can. And, like every Mishimoto oil catch can, this baffled catch can kit comes with the Mishimoto Lifetime Warranty! Our catch cans are different from most air-oil-separator (AOS) systems on a few levels. First, our catch cans are not heated. This means that all of the blow-by is able to condense in the can, including low-octane oil vapors and contaminated fuel vapors. Most AOS systems also drain the blow-by back into the oil pan, while our catch cans trap the blow-by and keep it out of the engine permanently. If you’ve seen what we’ve seen in the bottom of our catch cans, you won’t want that draining back into your oil either.This Part Fits: Year Make Model Submodel 2019-2020 BMW M2 Competition 2015-2018 BMW M3 Base 2015-2020 BMW M4 Base 2019-2020 BMW M4 CS 2016 BMW M4 GTS

Give your 2015-2020 BMW M3/M4 the protection it deserves with the Mishimoto Baffled Oil Catch Can Kit. The introduction of the S55 into the M3 and M4 in 2015 was the first time compact M’s saw turbos from the factory, but these engines brought along another long-standing tradition-blow-by. The Mishimoto BMW M3/M4 catch can kit uses proven engineering from the patent pending Mishimoto 2-Port Compact Baffled Oil Catch Can, with its 50-micron bronze filter and internal baffle, to better separate the oil from the crankcase vapors. The engineers at Mishimoto designed a CNC-machined lid that features large inlet and outlet ports to match the inner dimension of the CCV hose. This baffled oil catch can defends your intercooler, intake system, and VANOS system from oil blow-by and helps maintain proper octane levels to reduce potential detonation. The kit comes with two direct-fit hoses, which require no modification to the engine cover, and one direct-fit billet aluminum mounting bracket that is extremely easy to install and mounts the can in a serviceable location! Available with a color-matched bracket. Choose from 12 BMW specific color-matched options or classic black. Two aluminum, 3/4" barb fittings connect the hoses to the can. And, like every Mishimoto oil catch can, this baffled catch can kit comes with the Mishimoto Lifetime Warranty! Our catch cans are different from most air-oil-separator (AOS) systems on a few levels. First, our catch cans are not heated. This means that all of the blow-by is able to condense in the can, including low-octane oil vapors and contaminated fuel vapors. Most AOS systems also drain the blow-by back into the oil pan, while our catch cans trap the blow-by and keep it out of the engine permanently. If you’ve seen what we’ve seen in the bottom of our catch cans, you won’t want that draining back into your oil either.This Part Fits: Year Make Model Submodel 2019-2020 BMW M2 Competition 2015-2018 BMW M3 Base 2015-2020 BMW M4 Base 2019-2020 BMW M4 CS 2016 BMW M4 GTS

Give your 2015-2020 BMW M3/M4 the protection it deserves with the Mishimoto Baffled Oil Catch Can Kit. The introduction of the S55 into the M3 and M4 in 2015 was the first time compact M’s saw turbos from the factory, but these engines brought along another long-standing tradition-blow-by. The Mishimoto BMW M3/M4 catch can kit uses proven engineering from the patent pending Mishimoto 2-Port Compact Baffled Oil Catch Can, with its 50-micron bronze filter and internal baffle, to better separate the oil from the crankcase vapors. The engineers at Mishimoto designed a CNC-machined lid that features large inlet and outlet ports to match the inner dimension of the CCV hose. This baffled oil catch can defends your intercooler, intake system, and VANOS system from oil blow-by and helps maintain proper octane levels to reduce potential detonation. The kit comes with two direct-fit hoses, which require no modification to the engine cover, and one direct-fit billet aluminum mounting bracket that is extremely easy to install and mounts the can in a serviceable location! Available with a color-matched bracket. Choose from 12 BMW specific color-matched options or classic black. Two aluminum, 3/4" barb fittings connect the hoses to the can. And, like every Mishimoto oil catch can, this baffled catch can kit comes with the Mishimoto Lifetime Warranty! Our catch cans are different from most air-oil-separator (AOS) systems on a few levels. First, our catch cans are not heated. This means that all of the blow-by is able to condense in the can, including low-octane oil vapors and contaminated fuel vapors. Most AOS systems also drain the blow-by back into the oil pan, while our catch cans trap the blow-by and keep it out of the engine permanently. If you’ve seen what we’ve seen in the bottom of our catch cans, you won’t want that draining back into your oil either.This Part Fits: Year Make Model Submodel 2019-2020 BMW M2 Competition 2015-2018 BMW M3 Base 2015-2020 BMW M4 Base 2019-2020 BMW M4 CS 2016 BMW M4 GTS

Give your 2015-2020 BMW M3/M4 the protection it deserves with the Mishimoto Baffled Oil Catch Can Kit. The introduction of the S55 into the M3 and M4 in 2015 was the first time compact M’s saw turbos from the factory, but these engines brought along another long-standing tradition-blow-by. The Mishimoto BMW M3/M4 catch can kit uses proven engineering from the patent pending Mishimoto 2-Port Compact Baffled Oil Catch Can, with its 50-micron bronze filter and internal baffle, to better separate the oil from the crankcase vapors. The engineers at Mishimoto designed a CNC-machined lid that features large inlet and outlet ports to match the inner dimension of the CCV hose. This baffled oil catch can defends your intercooler, intake system, and VANOS system from oil blow-by and helps maintain proper octane levels to reduce potential detonation. The kit comes with two direct-fit hoses, which require no modification to the engine cover, and one direct-fit billet aluminum mounting bracket that is extremely easy to install and mounts the can in a serviceable location! Available with a color-matched bracket. Choose from 12 BMW specific color-matched options or classic black. Two aluminum, 3/4" barb fittings connect the hoses to the can. And, like every Mishimoto oil catch can, this baffled catch can kit comes with the Mishimoto Lifetime Warranty! Our catch cans are different from most air-oil-separator (AOS) systems on a few levels. First, our catch cans are not heated. This means that all of the blow-by is able to condense in the can, including low-octane oil vapors and contaminated fuel vapors. Most AOS systems also drain the blow-by back into the oil pan, while our catch cans trap the blow-by and keep it out of the engine permanently. If you’ve seen what we’ve seen in the bottom of our catch cans, you won’t want that draining back into your oil either.This Part Fits: Year Make Model Submodel 2019-2020 BMW M2 Competition 2015-2018 BMW M3 Base 2015-2020 BMW M4 Base 2019-2020 BMW M4 CS 2016 BMW M4 GTS

Give your 2015-2020 BMW M3/M4 the protection it deserves with the Mishimoto Direct Fit Catch Can Kit. The introduction of the S55 into the M3 and M4 in 2015 was the first that the compact M's saw turbos from the factory, but these engines brought along another long-standing tradition - Blow-by.The Mishimoto BMW M3/M4 catch can kit uses proven engineering from the patent pending Mishimoto 2-Port Compact Baffled Oil Catch Can, with its 50-micron bronze filter and internal baffle to better separate the oil from the crankcase vapors. The engineers at Mishimoto designed a CNC-machined lid that features large inlet and outlet ports in order to match the inner dimension of the CCV hose. This baffled oil catch can defends your intercooler, intake system, and VANOS system from oil blow-by and helps maintain proper octane levels to reduce potential detonation.The kit comes with two direct-fit hoses, which require no modification to the engine cover, and one direct-fit billet aluminum mounting bracket that is extremely easy to install and mounts the can in a serviceable location! Two aluminum, 3/4in barb fittings connect the hoses to the can. And, like every Mishimoto oil catch can, this baffled catch can kit comes with the Mishimoto Lifetime Warranty!Our catch cans are different from most air-oil-separator (AOS) systems on a few levels. First, our catch cans are not heated. This means that all of the blow-by is able to condense in the can, including low-octane oil vapors and contaminated fuel vapors. Most AOS systems also drain the blow-by back into the oil pan, while our catch cans trap the blow-by and keep it out of the engine permanently. If you've seen what We've seen in the bottom of our catch cans, you won't want that draining back into your oil either.This Part Fits: Year Make Model Submodel 2016-2018 BMW M2 Base 2019-2020 BMW M2 Competition 2015-2018 BMW M3 Base 2015-2020 BMW M4 Base 2019-2020 BMW M4 CS 2016 BMW M4 GTS

Give your 2015-2020 BMW M3/M4 the protection it deserves with the Mishimoto Baffled Oil Catch Can Kit. The introduction of the S55 into the M3 and M4 in 2015 was the first time compact M’s saw turbos from the factory, but these engines brought along another long-standing tradition-blow-by. The Mishimoto BMW M3/M4 catch can kit uses proven engineering from the patent pending Mishimoto 2-Port Compact Baffled Oil Catch Can, with its 50-micron bronze filter and internal baffle, to better separate the oil from the crankcase vapors. The engineers at Mishimoto designed a CNC-machined lid that features large inlet and outlet ports to match the inner dimension of the CCV hose. This baffled oil catch can defends your intercooler, intake system, and VANOS system from oil blow-by and helps maintain proper octane levels to reduce potential detonation. The kit comes with two direct-fit hoses, which require no modification to the engine cover, and one direct-fit billet aluminum mounting bracket that is extremely easy to install and mounts the can in a serviceable location! Available with a color-matched bracket. Choose from 12 BMW specific color-matched options or classic black. Two aluminum, 3/4" barb fittings connect the hoses to the can. And, like every Mishimoto oil catch can, this baffled catch can kit comes with the Mishimoto Lifetime Warranty! Our catch cans are different from most air-oil-separator (AOS) systems on a few levels. First, our catch cans are not heated. This means that all of the blow-by is able to condense in the can, including low-octane oil vapors and contaminated fuel vapors. Most AOS systems also drain the blow-by back into the oil pan, while our catch cans trap the blow-by and keep it out of the engine permanently. If you’ve seen what we’ve seen in the bottom of our catch cans, you won’t want that draining back into your oil either.This Part Fits: Year Make Model Submodel 2019-2020 BMW M2 Competition 2015-2018 BMW M3 Base 2015-2020 BMW M4 Base 2019-2020 BMW M4 CS 2016 BMW M4 GTS

High-output engines require high-flow crankcase ventilation. Our high-flow catch can utilizes a high-capacity bottom with a 5.3 fl. oz. capacity. The CNC-machined lid includes large, M27 x 2.0 inlets and outlets to let your crankcase breathe. Inside the can is a CNC-machined baffle with integrated filter that lets crankcase gases flow through while filtering out potentially harmful fuel, oil, and water vapors. Like our compact baffled oil catch can, our high-flow catch can and filter are fully serviceable for easy draining and cleaning. To make this kit a direct fit for your 2017+ Ford 6.7L Powerstroke, Mishimoto includes a custom-engineered, 3mm-thick steel bracket. This bracket mounts the can in an easy to access location for quick servicing. To wIt'stand the rigors of life under the hood of your 6.7L, our bracket is gusseted and powder-coated black for the highest strength and resistance to the elements. Also included with this kit is a set of direct-fit hoses and adapters that allow the catch can to tap into the stock CCV breather box and carry blow-by away from your engine. For even more protection, this 2017+ Ford 6.7L Powerstroke Baffled Oil Catch Can is backed by our Mishimoto Lifetime Warranty.This Part Fits: Year Make Model Submodel 2017-2021 Ford F-250 Super Duty King Ranch 2017-2021 Ford F-250 Super Duty Lariat 2018-2021 Ford F-250 Super Duty Limited 2017-2021 Ford F-250 Super Duty Platinum 2017-2021 Ford F-250 Super Duty XL 2017-2021 Ford F-250 Super Duty XLT 2017-2021 Ford F-350 Super Duty King Ranch 2017-2021 Ford F-350 Super Duty Lariat 2018-2021 Ford F-350 Super Duty Limited 2017-2021 Ford F-350 Super Duty Platinum 2017-2021 Ford F-350 Super Duty XL 2017-2021 Ford F-350 Super Duty XLT

High-output engines require high-flow crankcase ventilation. Our high-flow catch can utilizes a high-capacity bottom with a 5.3 fl. oz. capacity. The CNC-machined lid includes large, M27 x 2.0 inlets and outlets to let your crankcase breathe. Inside the can is a CNC-machined baffle with integrated filter that lets crankcase gases flow through while filtering out potentially harmful fuel, oil, and water vapors. Like our compact baffled oil catch can, our high-flow catch can and filter are fully serviceable for easy draining and cleaning. To make this kit a direct fit for your 2011-2016 Ford 6.7L Powerstroke, Mishimoto includes a custom-engineered, 3mm-thick steel bracket. This bracket mounts the can in an easy to access location for quick servicing. To wIt'stand the rigors of life under the hood of your 6.7L, our bracket is gusseted and powder-coated black for the highest strength and resistance to the elements. Also included with this kit is a set of direct-fit hoses and adapters that allow the catch can to tap into the stock CCV breather box and carry blow-by away from your engine. For even more protection, this 2011-2016 Ford 6.7L Powerstroke Baffled Oil Catch Can is backed by our Mishimoto Lifetime Warranty.This Part Fits: Year Make Model Submodel 2011-2016 Ford F-250 Super Duty King Ranch 2011-2016 Ford F-250 Super Duty Lariat 2013-2016 Ford F-250 Super Duty Platinum 2011-2016 Ford F-250 Super Duty XL 2011-2016 Ford F-250 Super Duty XLT 2011-2016 Ford F-350 Super Duty King Ranch 2011-2016 Ford F-350 Super Duty Lariat 2013-2016 Ford F-350 Super Duty Platinum 2011-2016 Ford F-350 Super Duty XL 2011-2016 Ford F-350 Super Duty XLT

The Ford modular V8 engine is an icon of American automotive engineering. The latest generation, the Coyote 5.0L, continues that legendary reputation into the modern era. However, even legends have their weaknesses, and your 5.0L Coyote V8 powered 2011-2014 F-150 is no exception. Blow-by can be a problem for even the most powerful. As oil, fuel and water vapors found in blow-by condense, they coat the intake tract, choking your engine and rendering all that power useless. Luckily, Mishimoto has a solution to protect your F-150?s engine with our 2011-2014 Ford F-150 5.0L V8 Catch Can Kit. Designed specifically for your 2011-2014 5.0L V8 F-150, this direct-fit kit installs in minutes and diverts harmful blow-by away from your intake tract. An application specific bracket and molded hoses with pre-installed quick-disconnect fittings make installation simple, without any modifications to your truck?s body. Inside our road-proven catch can, a baffle and air diverter help condense oil, fuel, and water vapor before it reaches your intake and combustion chamber. While our catch can protects your F-150?s engine from blow-by, our Mishimoto Lifetime Warranty protects your catch can from anything mother nature and the road can throw at it for the ultimate peace of mind.This Part Fits: Year Make Model Submodel 2011-2014 Ford F-150 FX2 2011-2014 Ford F-150 FX4 2011-2014 Ford F-150 King Ranch 2011-2014 Ford F-150 Lariat 2011-2014 Ford F-150 Platinum 2011-2014 Ford F-150 STX 2011-2014 Ford F-150 XL 2011-2014 Ford F-150 XLT