This Momentum GT intake system outflows the factory intake by 48%. The one-piece sealed housing includes auxiliary air inlet to eliminate the use of multiple-piece housings and ensure the coolest air intake charge available. A large, clear sight window is used for a hassle-free filter inspection and an aggressive style. A urethane plug is also included if you wish to block off the auxiliary air inlet. This system uses a high quality, dyno-tuned intake tube to achieve maximum power gains while maintaining a perfect fit. A custom high temperature reinforced silicone elbow coupling with aluminum fitting is included for easy install to the factory breather line.Installation InstructionsThis Part Fits: Year Make Model Submodel 2009-2014 Audi A4 Base 2009 Audi A4 Cabriolet 2015-2017 Audi A4 Premium 2015-2017 Audi A4 Premium Plus 2015,2017 Audi A4 Prestige 2010-2014 Audi A5 Cabriolet

The Momentum GT Pro 5R Cold Air Intake provides an impressive +102% Airflow increase over stock, allowing the N20 engine to breathe and perform to its greatest potential. The Pro 5R filter consists of an oiled 5-layer mesh cotton gauze media for maximum performance and filtration. The Pro 5R maintains a 98.6% efficiency rating, allowing high air flow and optimal performance even when dirty. Unique One-Piece High Quality Housing: A custom CAD designed roto-molded housing made of black, cross-linked, heat resistant polyethylene material eliminates the use of multiple components and ensures the coolest air intake charge available. A large clear sight window allows for filter inspection without removal of the airbox. The auxiliary air inlet allows for the maximum amount of air available for the intake. Carbon Fiber Trim On Housing: This Momentum GT intake system offers carbon fiber trim on housing to give that motorsport appearance. This cover overlay is constructed of lightweight high gloss, clear-coated 2 x 2 twill-weave carbon fiber. High Quality Tube: This system uses a high quality plastic CAD designed, dyno-tuned, roto-molded intake tube to achieve maximum power gains while maintaining a perfect fit. Large 5-Layer Performance Air Filter: This Momentum GT intake system was designed around the largest filter possible to allow maximum performance and filtration. This cone filter has a large 4" flange and is 6-1/2" tall. The Pro 5R performance air filter features 5-layers of progressively finer mesh cotton gauze oiled media for better air flow, and is constructed with 100% polyurethane frame for long life and multiple cleaning cycles. Premium Hardware: Premium stainless steel clamps and a silicone coupling are used for strength and durability while also providing the most secure installation available. Momentum GT intakes are designed with fewer parts for a quick and simple installation.This Part Fits: Year Make Model Submodel 2012-2016 BMW Z4 sDrive28i

Unique One-Piece High Quality Housing: A custom CAD designed roto-molded housing made from heat soak resistant material eliminates the use of multiple components and ensures the coolest air intake charge available. The roto-molded housing is made out of black cross-linked polyethylene. A urethane plug is also included if you wish to completely seal the air box. High Quality Tube: This system uses a high quality plastic CAD designed, dyno-tuned, roto-molded intake tube to achieve maximum power gains while maintaining a perfect fit. Large 5-Layer Performance Air Filter: This Momentum GT intake system was designed around the largest filter possible to allow maximum performance and filtration. This cylindrical filter has a large oval (6-3/4" x 4-3/4") flange and is 9" tall inverted top Pro 5R filter media. The Pro 5R performance air filter features 5-layers of progressively finer mesh cotton gauze oiled media and is constructed with 100% polyurethane frame for long life and multiple cleaning cycles. Premium Hardware: Premium stainless steel clamps and a silicone coupling are used for strength and durability while also providing the most secure installation available. Momentum GT intakes are designed with fewer parts for a quick and simple installation. Emissions Disclaimer: This product does not require a CARB EO# (Vehicle does not exist in U.S.)

Want more power out of your N55? The Momentum GT Pro 5R Cold Air Intake is the best system for creating power, airflow, and maximizing performance. This system provides a +26% air-flow increase over stock, allowing the car to breathe to its best ability. The Pro 5R filter consists of an oiled 5-layer mesh cotton gauze media for maximum performance and filtration. The Pro 5R maintains a 98.6% efficiency rating, allowing high air flow and optimal performance even when dirty. Unique One-Piece High Quality Housing: A custom CAD designed roto-molded housing made from heat soak resistant material eliminates the use of multiple components and ensures the coolest air intake charge available. The roto-molded housing is made out of black cross-linked polyethylene. A urethane plug is also included if you wish to completely seal the air box. High Quality Tube: This system uses a high quality plastic CAD designed, dyno-tuned, roto-molded intake tube to achieve maximum power gains while maintaining a perfect fit. Large 5-Layer Performance Air Filter: This Momentum GT intake system was designed around the largest filter possible to allow maximum performance and filtration. This cylindrical filter has a large oval (6-3/4" x 4-3/4") flange and is 9" tall inverted top Pro 5R filter media. The Pro 5R performance air filter features 5-layers of progressively finer mesh cotton gauze oiled media and is constructed with 100% polyurethane frame for long life and multiple cleaning cycles. Premium Hardware: Premium stainless steel clamps and a silicone coupling are used for strength and durability while also providing the most secure installation available. Momentum GT intakes are designed with fewer parts for a quick and simple installation.Installation InstructionsThis Part Fits: Year Make Model Submodel 2011-2013 BMW 135i Base 2011-2013 BMW 335i Base 2011-2013 BMW 335i xDrive Base 2013-2015 BMW X1 xDrive35i

Unique One-Piece High Quality Housing W/ Sight Window: The smooth one-piece (Patent Pending) high quality sealed housing with auxiliary air inlet is used to eliminate the use of multiple-piece housings and ensure the coolest air intake charge available. A large, clear sight window is used for a hassle-free filter inspection and an aggressive style. High Quality Tube: This system uses a high quality plastic CAD designed, dyno-tuned, roto-molded intake tube to achieve maximum power gains while maintaining a perfect fit. Large 5-Layer Performance Air Filter: The Momentum GT intake is designed around a pre-oiled, large 8" tall 360 degree radial flow performance air filter with 5-layers of progressive finer mesh cotton media providing maximum airflow and performance. The unique air filter to housing interface (patent pending) allows for maximum filter size which increases the available air volume while simplifying the installation process. Aluminum Heat-Shield Panel: A durable aluminum heat-shield panel is secured on the housing to protect it from the high heat of the turbocharger. Premium Hardware: Premium stainless steel clamps and a silicone bellow coupling are used for strength and durability while also providing the most secure installation available. Momentum GT intakes are designed with fewer parts for a quick and simple installation. Note: This intake system is not CARB exempt at this time and is not legal for sale in California or use on vehicles registered with the California Department of Motor Vehicles.This Part Fits: Year Make Model Submodel 2017-2021 BMW 230i Base 2017-2021 BMW 230i xDrive Base 2017-2018 BMW 330i Base 2017-2019 BMW 330i GT xDrive Base 2017-2019 BMW 330i xDrive Base 2017-2020 BMW 430i Base 2017-2020 BMW 430i Gran Coupe Base 2017-2020 BMW 430i xDrive Base 2017-2020 BMW 430i xDrive Gran Coupe Base

Large 3-Layer Performance Air Filter:The Momentum GT intake is designed around an oil-free, large 7-1/2" tall inverted top 360 degree radial flow performance air filter with 3-layers of progressive finer porosity synthetic media providing maximum convenience. The unique air filter to housing interface (patent pending) allows for maximum filter size which increases the available air volume while simplifying the installation process.This Part Fits: Year Make Model Submodel 2012-2015 BMW 335i Base 2014-2016 BMW 335i GT xDrive Base 2013-2015 BMW 335i xDrive Base 2014-2016 BMW 435i Base 2015-2016 BMW 435i Gran Coupe Base 2014-2016 BMW 435i xDrive Base 2015-2016 BMW 435i xDrive Gran Coupe Base 2016-2018 BMW M2 Base 2014-2016 BMW M235i Base 2015-2016 BMW M235i xDrive Base

Unique One-Piece High Quality Housing W/ Auxiliary Inlet: The smooth one-piece (Patent Pending) high quality sealed housing with auxiliary air inlet is used to eliminate the use of multiple-piece housings and ensure the coolest air intake charge available. A large, clear sight window is used for a hassle-free filter inspection and an aggressive style. Carbon Fiber Trim On Housing: This Momentum GT intake system offers carbon fiber trim on housing to give that motorsport appearance. This cover overlay is constructed of lightweight high gloss, clear-coated 2 x 2 twill-weave carbon fiber. High Quality Tube: This system uses a high quality plastic CAD designed, dyno-tuned, roto-molded intake tube to achieve maximum power gains while maintaining a perfect fit. Large 3-Layer Performance Air Filter: The Momentum GT intake is designed around an oil-free, large 8-3/4" oval 360 degree radial flow performance air filter with 3-layers of progressive finer porosity synthetic media providing maximum convenience. The unique air filter to housing interface (patent pending) allows for maximum filter size which increases the available air volume while simplifying the installation process. Custom High Temp. Silicone Coupling: A custom high temperature reinforced silicone elbow coupling is included for easy install to the factory breather line. Premium Hardware Premium stainless steel clamps are used for strength and durability while also pro viding the most secure installation available. Momentum GT intakes are designed with fewer parts for a quick and simple installation.Installation InstructionsThis Part Fits: Year Make Model Submodel 2016-2018 BMW 340i Base 2016-2018 BMW 340i xDrive Base 2017-2020 BMW 440i Base 2017-2020 BMW 440i Gran Coupe Base 2017-2020 BMW 440i xDrive Base 2017-2020 BMW 440i xDrive Gran Coupe Base 2016-2018 BMW 740i Base 2017-2018 BMW 740i xDrive Base 2017-2021 BMW M240i Base 2017-2021 BMW M240i xDrive Base

Advanced Flow Engineering, Inc. (aFe) produces high flow, high performance air filters & intake systems for the automotive industry. Founded in April, 1999, aFe was created to address an obvious need in the automotive aftermarket industry: a lack of choice for a high performance aftermarket air filter. We are a team of engineers, machinists, production and sales people who believe in the product we design. We each have years of experience in our respective positions and together work to ensure that we have the best product on the market. Our purpose was not just to be another vendor that offers air filters, we chose to pay attention to those finer details that set an aFe filter apart from the competition. We currently offer aftermarket air filters for passenger cars, light trucks and SUVs. We also have many applications for round racing and universal clamp-on filters. To find your particular applicati on, please use our new search engines. If you do not see your particular application listed, please contact us.Installation InstructionsThis Part Fits: Year Make Model Submodel 2014-2018 BMW 328d Base 2014-2018 BMW 328d xDrive Base

Bringing you the next generation of intakes, the Momentum GT sealed air intake system is designed using the most up-to-date engineering tools and techniques to provide you with the perfect blend of power and protection. This intake system is superior in every way. From the one-piece sealed housing with a tire tread top, to the massive air filter and premium hardware, we spared no expense to give you the best intake on the market.Installation InstructionsThis Part Fits: Year Make Model Submodel 2011 BMW 1 Series M Base 2008-2010 BMW 135i Base 2007-2010 BMW 335i Base 2009-2010 BMW 335i xDrive Base 2011-2013 BMW 335is Base 2007-2008 BMW 335xi Base 2008-2010 BMW 535i Base 2009-2010 BMW 535i xDrive Base 2008 BMW 535xi Base

Unique Computer Design Carbon Fiber Housings: The simple yet elegant design of the one-piece sealed housings makes installation a snap and features our (Patent Pending) filter-to-housing interface. The housing is made out of lightweight high gloss, clear-coated twill weave carbon fiber. Dyno-Tuned Carbon Fiber Intake Tubes: Lightweight, high gloss, clear-coated twill weave carbon fiber tubes to achieve maximum power gains while maintaining a perfect fit. Large 3-Layer "Oil-Free" Performance Air Filter: This Momentum intake system was designed around the largest filter possible to allow maximum performance and filtration. This cone inverted top filter has a large 3-1/2" round flange and is 6-1/2" tall Pro DRY S filter media. The Pro DRY S performance air filter features 3-layers of progressively finer mesh synthetic "oil-free" media and is constructed with 100% polyurethane frame for long life and multiple cleaning cycles. Black Series Momentum Air Intake System: Also included in the kit is a Black Series serialized plate to assure the authenticity of the intake. Premium Hardware: Premium stainless steel clamps and a reinforced silicone coupler are used for strength and durability while also providing the most secure installation available. Momentum intakes are designed with fewer parts for a quick and simple installation. Note: This intake system is not CARB exempt at this time and is not legal for sale in California or use on vehicles registered with the California Department of Motor Vehicles.Installation InstructionsThis Part Fits: Year Make Model Submodel 2019-2021 BMW M2 Competition 2015-2018 BMW M3 Base 2015-2020 BMW M4 Base 2019-2020 BMW M4 CS 2016 BMW M4 GTS

The smooth one-piece sealed housings with auxiliary air inlets are used to eliminate the use of multiple-piece housings and ensure the coolest air intake charge available. Large, clear sight windows are used for a hassle-free filter inspection and an aggressive style. This System uses CAD designed, dyno-tuned, roto-molded intake tubes to achieve maximum power gains while maintaining a perfect fit. This intake system utilizes oil-free, large 5" tall conical 360 degree radial flow performance air filters with 3-Layer progressively finer porosity synthetic media for maximum convenience. Premium clamps are used for strength and durability while also providing the most secure installation available. Momentum intakes are designed with fewer parts for a quick and simple installation.This Part Fits: Year Make Model Submodel 2019-2021 BMW M2 Competition 2015-2018 BMW M3 Base 2015-2020 BMW M4 Base 2019-2020 BMW M4 CS 2016 BMW M4 GTS

Advanced Flow Engineering, Inc. (aFe) produces high flow, high performance air filters & intake systems for the automotive industry. Founded in April, 1999, aFe was created to address an obvious need in the automotive aftermarket industry: a lack of choice for a high performance aftermarket air filter. We are a team of engineers, machinists, production and sales people who believe in the product we design. We each have years of experience in our respective positions and together work to ensure that we have the best product on the market. Our purpose was not just to be another vendor that offers air filters, we chose to pay attention to those finer details that set an aFe filter apart from the competition. We currently offer aftermarket air filters for passenger cars, light trucks and SUVs. We also have many applications for round racing and universal clamp-on filters. To find your particular application, please use our new search engines. If you do not see your particular application listed, please contact us.Installation InstructionsThis Part Fits: Year Make Model Submodel 2012-2016 BMW 528i Base 2012-2016 BMW 528i xDrive Base

aFe is proud to introduce the all new Momentum sealed intake system for the 2012-2014 BMW M5 (F10) with the V8-4.4L twin-turbo engine. This all new Momentum intake system produced up to 28hp and 31lbs. x ft. torque and outflows the factory intake by 29%.? This highly engineered intake system uses twin black rotomolded airboxes that keeps warm engine air out for maximum performance. The housing use a unique Patent Pending filter to housing interface that enables us to use the largest filters possible while maintaining a simple hassle-free installation. The C.A.D. designed intake tubes are engineered to unleash all available horsepower and to fit perfectly. The kit comes complete will all necessary hardware. Order Now! Pro DRY S (P/N: 51-76301) or Pro 5R (P/N: 54-76301)Installation InstructionsThis Part Fits: Year Make Model Submodel 2013-2016 BMW M5 Base 2012-2018 BMW M6 Base 2014-2019 BMW M6 Gran Coupe Base

A custom computer designed roto-molded housing eliminates the use of multiple components and ensures the coolest air intake charge available. A clear sight window allows for filter inspection without removal of the airbox. The roto-molded housing is made out of black cross-linked polyethylene. The housing is designed to retain the same water fording height as the factory intake system while providing more air flow and better protection. This System uses a CAD designed, dyno-tuned, roto-molded intake tube to achieve maximum power gains while maintaining a perfect fit. This tube has built-in resonance chambers to catch un-wanted air intake noises. This Momentum GT intake system was designed around the large st filter possible to allow maximum performance and filtration. This filter has a massive 5" round flange and is 8" tall with an inverted top and features our pre-oiled Pro 5R media. The Pro 5R performance air filter features 5-layers of progressively finer mesh cotton media providing maximum airflow and performance. The unique air filter to housing interface (patent pending) allows for maximum filter size which increases the available air volume while simplifying the installation process. Premium stainless steel T-bolt clamps are used for durability and provide the best corrosion resistance possible. Momentum GT intakes are designed with fewer parts for a quick and simple installationInstallation InstructionsThis Part Fits: Year Make Model Submodel 2021 Jeep Gladiator 80th Anniversary 2020,2022 Jeep Gladiator Altitude 2023 Jeep Gladiator Freedom 2021-2023 Jeep Gladiator High Altitude 2020 Jeep Gladiator Launch Edition 2020-2024 Jeep Gladiator Mojave 2024 Jeep Gladiator Mojave X 2020-2023 Jeep Gladiator Overland 2020-2024 Jeep Gladiator Rubicon 2024 Jeep Gladiator Rubicon X 2020-2024 Jeep Gladiator Sport 2020-2024 Jeep Gladiator Sport S 2021-2023 Jeep Gladiator Texas Trail 2021-2024 Jeep Gladiator Willys 2021-2023 Jeep Gladiator Willys Sport 2021 Jeep Wrangler 80th Anniversary 2021,2023 Jeep Wrangler Freedom 2021 Jeep Wrangler Islander 2018-2025 Jeep Wrangler Rubicon 2024-2025 Jeep Wrangler Rubicon X 2018-2025 Jeep Wrangler Sport 2018-2025 Jeep Wrangler Sport S 2021 Jeep Wrangler Unlimited 80th Anniversary 2021,2023 Jeep Wrangler Unlimited Freedom 2021-2023 Jeep Wrangler Unlimited High Altitude 2022-2023 Jeep Wrangler Unlimited High Tide 2021 Jeep Wrangler Unlimited Islander 2018-2019 Jeep Wrangler Unlimited Moab 2018-2025 Jeep Wrangler Unlimited Rubicon 2024-2025 Jeep Wrangler Unlimited Rubicon X 2018-2024 Jeep Wrangler Unlimited Sahara 2021-2023 Jeep Wrangler Unlimited Sahara Altitude 2018-2025 Jeep Wrangler Unlimited Sport 2021-2023 Jeep Wrangler Unlimited Sport Altitude 2018-2025 Jeep Wrangler Unlimited Sport S 2021-2025 Jeep Wrangler Unlimited Willys 2021-2024 Jeep Wrangler Unlimited Willys Sport 2021-2025 Jeep Wrangler Willys 2021-2024 Jeep Wrangler Willys Sport

Unique One-Piece Housing: The smooth one-piece sealed housing with auxiliary air scoop is used to eliminate the use of multiple-piece housings and ensure the coolest air intake charge available. A urethane plug is also included for those cold weather applications where you want to block the auxiliary air scoop. A large, clear sight window is used for a hassle-free filter inspection and an aggressive style. (US PAT 9440175) For Filter-to-Housing Interface. Roto-mold Tube: This System uses a two piece CAD designed, dyno-tuned, roto-mold intake tube to achieve maximum power gains while maintaining a perfect fit. Huge 5-Layer Performance Air Filter: The Momentum GT is designed around a pre-oiled, large 8" Tall round inverted top 360 degree radial flow performance air filter with 5-layers of progressive finer mesh cotton media providing maximum airflow and performance. The unique air filter to housing interface (patent pending) allows for maximum filter size which increases the available air volume while simplifying the installation process. Premium Hardware: Premium stainless steel T-bolt clamps and a urethane hump coupler are used for strength and durability while also providing the most secure installation available. Momentum GT intakes are designed with fewer parts for a quick and simple installation.Installation InstructionsThis Part Fits: Year Make Model Submodel 2016-2024 Dodge Durango Citadel 2017-2024 Dodge Durango GT 2020-2024 Dodge Durango GT Plus 2023-2024 Dodge Durango GT Premium 2016 Dodge Durango Limited 2019-2024 Dodge Durango Pursuit 2016-2020 Dodge Durango Special Service 2016-2024 Dodge Durango SXT 2018-2021,2023-2024 Dodge Durango SXT Plus 2016 Jeep Grand Cherokee 75th Anniversary 2021 Jeep Grand Cherokee 80th Anniversary 2018-2020 Jeep Grand Cherokee Altitude 2018-2021 Jeep Grand Cherokee High Altitude 2016-2020 Jeep Grand Cherokee Laredo 2021 Jeep Grand Cherokee Laredo E 2021 Jeep Grand Cherokee Laredo X 2016-2021 Jeep Grand Cherokee Limited 2019-2021 Jeep Grand Cherokee Limited X 2016-2021 Jeep Grand Cherokee Overland 2016-2021 Jeep Grand Cherokee Summit 2017-2021 Jeep Grand Cherokee Trailhawk 2019-2020 Jeep Grand Cherokee Upland

Bringing you the next generation of intakes, the Momentum GT sealed air intake system is designed using the most up-to-date engineering tools and techniques to provide you with the perfect blend of power and protection. This intake system is superior in every way. From the one-piece sealed housing with a tire tread top, to the massive air filter and premium hardware, we spared no expense to give you the best intake on the market.Installation InstructionsThis Part Fits: Year Make Model Submodel 2011 Jeep Wrangler 70th Anniversary 2007-2011 Jeep Wrangler Rubicon 2007-2011 Jeep Wrangler Sahara 2010-2011 Jeep Wrangler Sport 2011 Jeep Wrangler Unlimited 70th Anniversary 2007-2011 Jeep Wrangler Unlimited Rubicon 2007-2011 Jeep Wrangler Unlimited Sahara 2010-2011 Jeep Wrangler Unlimited Sport 2007-2010 Jeep Wrangler Unlimited X 2007-2010 Jeep Wrangler X

Bringing you the next generation of intakes, aFe is proud to introduce the Momentum GT Sealed intake system for the 2012-2018 Jeep Wrangler (JK) with the V6 3.6L engine. The Momentum GT sealed air intake system is designed using the most up-to-date engineering tools and techniques to provide you with the perfect blend of power and protection. This system is superior in every way. From the one-piece sealed housing, to the massive air filter, rotomolded tube w/ built-in resonance chamber and premium hardware. Unique One-Piece High Qualit y Housing w/ Sight Window: A custom computer designed roto-molded housing eliminates the use of multiple components and ensures the coolest air intake charge available. A clear sight window allows for filter inspection without removal of the airbox. The roto-molded housing is made out of black cross-linked polyethylene. Roto-molded Tube: This System uses a CAD designed, dyno-tuned, roto-molded intake tube to achieve maximum power gains while maintaining a perfect fit. This tube has a built-in resonance chamber to catch un-wanted air intake noises. Large 5-Layer Performance Air Filter: This Momentum GT intake system was designed around the largest filter possible to allow maximum performance and filtration. This cone inverted top filter has a massive round flange and is 9" tall inverted top Pro 5R media. The Pro 5R performance air filter features 5-layers of progressive finer mesh cotton media providing maximum airflow and performance. The unique air filter to housing interface allows for maximum filter size which increases the available air volume while simplifying the installation process. (US PAT 9440175) For Filter-to-Housing Interface. Premium Hardware: Premium stainless steel T-bolt clamps are used to securely mount the high flow air filter to the 1-piece airbox. Momentum GT intakes are designed with fewer parts for a quick and simple installation.Installation InstructionsThis Part Fits: Year Make Model Submodel 2016 Jeep Wrangler 75th Anniversary 2012-2017 Jeep Wrangler Rubicon 2012-2017 Jeep Wrangler Sahara 2012-2017 Jeep Wrangler Sport 2016 Jeep Wrangler Sport S 2016 Jeep Wrangler Unlimited 75th Anniversary 2012-2017 Jeep Wrangler Unlimited Rubicon 2012-2017 Jeep Wrangler Unlimited Sahara 2012-2017 Jeep Wrangler Unlimited Sport 2016 Jeep Wrangler Unlimited Sport S 2018 Jeep Wrangler JK Rubicon 2018 Jeep Wrangler JK Sahara 2018 Jeep Wrangler JK Sport 2018 Jeep Wrangler JK Sport S 2018 Jeep Wrangler JK Unlimited Rubicon 2018 Jeep Wrangler JK Unlimited Sahara 2018 Jeep Wrangler JK Unlimited Sport 2018 Jeep Wrangler JK Unlimited Sport S

The smooth one-piece sealed housing with auxiliary air scoop is used to eliminate the use of multiple-piece housings and ensure the coolest air intake charge available. A large, clear sight window is used for a hassle-free filter inspection and an aggressive style. This System uses a two piece CAD designed, dyno-tuned, roto-mold intake tube to achieve maximum power gains while maintaining a perfect fit. The Momentum GT is designed around a pre-oiled, large 8 IN Tall round inverted top 360 degree radial flow performance air filter with 5-layers of progressive finer mesh cotton media providing maximum airflow and performance. The unique air filter to housing interface (patent pending) allows for maximum filter size which increases the available air volume while simplifying the installation process. Premium stainless steel T-bolt clamps and a urethane hump coupling are used for strength and durability while also providing the most secure installation available. Momentum GT intakes are designed with fewer parts for a quick and simple installation.Installation InstructionsThis Part Fits: Year Make Model Submodel 2011-2015 Dodge Durango Citadel 2011-2013 Dodge Durango Crew 2011 Dodge Durango Express 2011 Dodge Durango Heat 2014-2015 Dodge Durango Limited 2014-2015 Dodge Durango Rallye 2012-2015 Dodge Durango Special Service 2012-2015 Dodge Durango SXT 2011-2015 Jeep Grand Cherokee Laredo 2011-2015 Jeep Grand Cherokee Limited 2011-2015 Jeep Grand Cherokee Overland 2012 Jeep Grand Cherokee Overland Summit 2014-2015 Jeep Grand Cherokee Summit

Unique One-Piece High Quality Housing W/ Sight Window: A custom CAD designed roto-molded housing made from heat soak resistant material eliminates the use of multiple components and ensures the coolest air intake charge available. A large clear sight window allows for filter inspection without removal of the air box. The roto-molded housing is made out of black cross-linked polyethylene. High Quality Tube: This system uses a high quality plastic, CAD designed, dyno-tuned, roto-molded intake tube to achieve maximum power gains while maintaining a perfect fit. Also included is a high quality billet aluminum air temp sensor fitting provided for easy installation. Large 5-Layer Performance Air Filter: This Momentum GT intake system was designed around the largest filter possible to allow maximum performance and filtration. This cone filter has a large (6-3/4" x 4-3/4") oval flange and is 9" tall with an inverted top. The Pro 5R performance air filter features 5-layers of progressively finer mesh cotton gauze oiled media and is constructed with 100% polyurethane frame for long life and multiple cleaning cycles. Premium Hardware: Premium stainless steel T-bolt clamps and a reinforced silicone hump coupling are used for strength and durability while also providing the most secure installation available. Momentum intakes are designed with fewer parts for a quick and simple installation.Installation InstructionsThis Part Fits: Year Make Model Submodel 2018-2021 Dodge Durango SRT 2022-2024 Dodge Durango SRT 392 2014-2021 Jeep Grand Cherokee SRT 2012-2013 Jeep Grand Cherokee SRT8

Unique One-Piece Housing w/ Sight Window: The smooth one-piece sealed housing with auxiliary air scoop is used to eliminate the use of multiple-piece housings and ensure the coolest air intake charge available. A large, clear sight window is used for a hassle-free filter inspection and an aggressive style. (Housing-to-Filter Interface US PAT 9440175) Huge 5-Layer Performance Air Filter: The Momentum GT is designed around a pre-oiled, large 8" tall 360 degree radial flow performance air filter with 5-layers of progressive finer mesh cotton media providing maximum airflow and performance. The unique air filter to housing interface allows for maximum filter size which increases the available air volume while simplifying the installation process. Premium Hardware: Premium stainless steel T-bolt clamps and a silicone hump coupler are used for strength and durability while also providing the most secure installation available. Momentum GT intakes are designed with fewer parts for a quick and simple installation. Note: This intake system is not CARB exempt at this time and is not legal for sale in California or use on vehicles registered with the California Department of Motor Vehicles.Installation InstructionsThis Part Fits: Year Make Model Submodel 2011-2024 Dodge Durango Citadel 2011-2013 Dodge Durango Crew 2018 Dodge Durango GT 2014-2015 Dodge Durango Limited 2018-2024 Dodge Durango Pursuit 2011-2024 Dodge Durango R/T 2022-2023 Dodge Durango R/T Hemi Orange 2022-2024 Dodge Durango R/T Plus 2023-2024 Dodge Durango R/T Premium 2012-2024 Dodge Durango Special Service 2018 Dodge Durango SXT 2018-2020 Jeep Grand Cherokee High Altitude 2011-2013 Jeep Grand Cherokee Laredo 2011-2021 Jeep Grand Cherokee Limited 2019-2021 Jeep Grand Cherokee Limited X 2011-2021 Jeep Grand Cherokee Overland 2012 Jeep Grand Cherokee Overland Summit 2014-2021 Jeep Grand Cherokee Summit 2017-2021 Jeep Grand Cherokee Trailhawk

Bringing you the next generation of intakes, the Momentum GT sealed air intake system is designed using the most up-to-date engineering tools and techniques to provide you with the perfect blend of power and protection. This intake system is superior in every way. From the one-piece sealed housing with a tire tread top, to the massive air filter and premium hardware, we spared no expense to give you the best intake on the market.Installation InstructionsThis Part Fits: Year Make Model Submodel 2016 Jeep Wrangler 75th Anniversary 2012-2017 Jeep Wrangler Rubicon 2012-2017 Jeep Wrangler Sahara 2012-2017 Jeep Wrangler Sport 2016 Jeep Wrangler Sport S 2016 Jeep Wrangler Unlimited 75th Anniversary 2012-2017 Jeep Wrangler Unlimited Rubicon 2012-2017 Jeep Wrangler Unlimited Sahara 2012-2017 Jeep Wrangler Unlimited Sport 2016 Jeep Wrangler Unlimited Sport S 2018 Jeep Wrangler JK Rubicon 2018 Jeep Wrangler JK Sahara 2018 Jeep Wrangler JK Sport 2018 Jeep Wrangler JK Sport S 2018 Jeep Wrangler JK Unlimited Rubicon 2018 Jeep Wrangler JK Unlimited Sahara 2018 Jeep Wrangler JK Unlimited Sport 2018 Jeep Wrangler JK Unlimited Sport S

Bringing you the next generation of intakes, the Momentum GT sealed air intake system is designed using the most up-to-date engineering tools and techniques to provide you with the perfect blend of power and protection. This intake system is superior in every way. From the one-piece sealed housing with a tire tread design top, to the massive air filter and premium hardware, we spared no expense to give you the best intake on the market. This Momentum GT intake system outflowed the factory intake by 46% and produced 11 additional horsepower and 12 lbs. x ft. torque. Order Now! PRO DRY S (P/N: 51-76203) or PRO 5R (P/N: 54-76203)Installation InstructionsThis Part Fits: Year Make Model Submodel 2011 Jeep Wrangler 70th Anniversary 2007-2011 Jeep Wrangler Rubicon 2007-2011 Jeep Wrangler Sahara 2010-2011 Jeep Wrangler Sport 2011 Jeep Wrangler Unlimited 70th Anniversary 2007-2011 Jeep Wrangler Unlimited Rubicon 2007-2011 Jeep Wrangler Unlimited Sahara 2010-2011 Jeep Wrangler Unlimited Sport 2007-2010 Jeep Wrangler Unlimited X 2007-2010 Jeep Wrangler X

Advanced Flow Engineering, Inc. (aFe) produces high flow, high performance air filters & intake systems for the automotive industry. Founded in April, 1999, aFe was created to address an obvious need in the automotive aftermarket industry: a lack of choice for a high performance aftermarket air filter. We are a team of engineers, machinists, production and sales people who believe in the product we design. We each have years of experience in our respective positions and together work to ensure that we have the best product on the market. Our purpose was not just to be another vendor that offers air filters, we chose to pay attention to those finer details that set an aFe filter apart from the competition. We currently offer aftermarket air filters for passenger cars, light trucks and SUVs. We also have many applications for round racing and universal clamp-on filters. To find your particular application, please use our new search engines. If you do not see your particular application listed, please contact us.Installation InstructionsThis Part Fits: Year Make Model Submodel 2006 Jeep Wrangler 65th Anniversary Edition 2003-2006 Jeep Wrangler Rubicon 1997-2004 Jeep Wrangler Sahara 2005-2006 Jeep Wrangler SE 1997-2006 Jeep Wrangler Sport 2004-2006 Jeep Wrangler Unlimited 2005-2006 Jeep Wrangler Unlimited Rubicon 2002-2006 Jeep Wrangler X

Get more power out of your Titan with our Momentum GT Pro 5R Cold Air Intake. The Momentum GT is a high-quality system, featuring a one-piece sealed housing with auxiliary scoop, and sight-window for easily filter inspection. The Pro 5R filter consists of an oiled 5-layer mesh cotton gauze media for maximum performance and filtration. The Pro 5R maintains a 98.6% efficiency rating, allowing high air flow and optimal performance even when dirty. Unique One-Piece High Quality Housing w/ Auxiliary Scoop: The smooth one-piece high quality sealed housing with auxiliary air scoop is used to eliminate the use of multiple-piece housings and ensure the coolest air intake charge available. A large, clear sight window is used for a hassle-free filter inspection and an aggressive style. A urethane plug is also included if you wish to block off the auxiliary air inlet. High Quality Tube: This system uses a high quality, dyno-tuned intake tube to achieve maximum power gains while maintaining a perfect fit. Large Pro 5R Performance Air Filter: The Momentum GT is designed around a large Pro 5R performance 360 degree radial flow air filter with 5-layers of progressively finer mesh cotton gauze oiled media and is constructed with 100% polyurethane frame for long life and multiple cleaning cycles. The unique filter-to-housing interface (patent pending) allows for maximum filter size which increases the available air volume while simplifying the installation process. Premium Hardware: Premium clamps and a silicone elbow coupling are used for strength and flexibility while also providing the most secure installation available. Momentum intakes are designed with fewer parts for a quick and simple installation.This Part Fits: Year Make Model Submodel 2017-2024 Nissan TITAN Platinum Reserve 2017-2024 Nissan TITAN PRO-4X 2017-2023 Nissan TITAN S 2017-2021 Nissan TITAN SL 2017-2024 Nissan TITAN SV

Huge 5-Layer Performance Air Filter: The Momentum GT intake is designed around a pre-oiled, large 9" oval 360 degree radial flow performance air filter with 5-layers of progressive finer mesh cotton media providing maximum airflow and performance. The unique air filter to housing interface (patent pending) allows for maximum filter size which increases the available air volume while simplifying the installation process. The air filter is wrapped in reinforced metal providing maximum strength to prevent filter collapse. Also included is a Magnum SHIELD Pre-filter to protect your performance air filter from debris, repel water and keep your air filter cleaner, longer. Unique One-Piece High Quality Housing W/ Sight Window: A custom CAD designed roto-molded housing made from heat soak resistant material eliminates the use of multiple components and ensures the coolest air intake charge available. A large clear sight window allows for filter inspection without removal of the air box. The roto-molded housing is made out of black cross-linked polyethylene. A urethane plug is also included if you wish to completely seal the auxiliary air scoop. High Quality Tube: This system uses a high quality plastic CAD designed, dyno-tuned, roto-molded intake tube to achieve maximum power gains while maintaining a perfect fit. Premium Hardware: Premium stainless steel T-bolt clamps and a silicone bellows coupling are used for durability while also providing the most secure installation available. Momentum GT intakes are designed with fewer parts for a quick and simple installation. Emissions Disclaimer: This product does not require a CARB EO# (Vehicle does not exist in U.S.)Installation Instructions

Huge 5-Layer Performance Air Filter: The Momentum GT intake is designed around a pre-oiled, large 9" oval 360 degree radial flow performance air filter with 5-layers of progressive finer mesh cotton media providing maximum airflow and performance. The unique air filter to housing interface (patent pending) allows for maximum filter size which increases the available air volume while simplifying the installation process. The air filter is wrapped in reinforced metal providing maximum strength to prevent filter collapse. Unique One-Piece High Quality Housing W/ Sight Window: A custom CAD designed roto-molded housing made from heat soak resistant material eliminates the use of multiple components and ensures the coolest air intake charge available. A large clear sight window allows for filter inspection without removal of the air box. The roto-molded housing is made out of black cross-linked polyethylene. A urethane plug is also included if you wish to completely seal the auxiliary air inlet. High Quality Tube: This system uses a high quality plastic CAD designed, dyno-tuned, roto-molded intake tube to achieve maximum power gains while maintaining a perfect fit. Premium Hardware: High quality premium clamps and a silicone bellow coupling are used for durability while also providing the most secure installation available. Momentum GT intakes are designed with fewer parts for a quick and simple installation. Emissions Disclaimer: This product does not require a CARB EO# (Vehicle does not exist in U.S.)Installation Instructions

Advanced Flow Engineering, Inc. (aFe) produces high flow, high performance air filters & intake systems for the automotive industry. Founded in April, 1999, aFe was created to address an obvious need in the automotive aftermarket industry: a lack of choice for a high performance aftermarket air filter. We are a team of engineers, machinists, production and sales people who believe in the product we design. We each have years of experience in our respective positions and together work to ensure that we have the best product on the market. Our purpose was not just to be another vendor that offers air filters, we chose to pay attention to those finer details that set an aFe filter apart from the competition. We currently offer aftermarket air filters for passenger cars, light trucks and SUV's. We also have many applications for round racing and universal clamp-on filters. To find your particular appli cation, please use our new search engines. If you do not see your particular application listed, please contact us.Installation InstructionsThis Part Fits: Year Make Model Submodel 2016-2018 Nissan TITAN XD Platinum Reserve 2016-2018 Nissan TITAN XD PRO-4X 2016-2018 Nissan TITAN XD S 2016-2018 Nissan TITAN XD SL 2016-2018 Nissan TITAN XD SV

The Momentum GT cold air intake systems include a smooth one-piece high quality sealed housing with auxiliary air inlet to eliminate the use of multiple-piece housings and ensure the coolest air intake charge available. A large, clear sight window is used for a hassle-free filter inspection and an aggressive style. A urethane plug is also included if you wish to block off the auxiliary air inlet. This system uses a high quality, dyno-tuned intake tube to achieve maximum power gains while maintaining perfect fit. A custom high temperature reinforced silicone elbow coupling with aluminum fitting is included for easy install to the factory breather line.Installation InstructionsThis Part Fits: Year Make Model Submodel 2011-2013 INFINITI QX56 Base 2014-2018 INFINITI QX80 Base 2016-2017,2019-2020 INFINITI QX80 Limited 2019-2024 INFINITI QX80 Luxe 2021-2024 INFINITI QX80 Premium Select 2021-2024 INFINITI QX80 Sensory 2021-2024 Nissan Armada Midnight Edition 2010-2015,2017-2024 Nissan Armada Platinum 2018-2020 Nissan Armada Platinum Reserve 2021-2023 Nissan Armada S 2010 Nissan Armada SE 2011-2015,2017-2024 Nissan Armada SL 2011-2015,2017-2024 Nissan Armada SV 2010 Nissan Armada Titanium

Advanced Flow Engineering, Inc. (aFe) produces high flow, high performance air filters & intake systems for the automotive industry. Founded in April, 1999, aFe was created to address an obvious need in the automotive aftermarket industry: a lack of choice for a high performance aftermarket air filter. We are a team of engineers, machinists, production and sales people who believe in the product we design. We each have years of experience in our respective positions and together work to ensure that we have the best product on the market. Our purpose was not just to be another vendor that offers air filters, we chose to pay attention to those finer details that set an aFe filter apart from the competition. We currently offer aftermarket air filters for passenger cars, light trucks and SUVs. We also have many applications for round racing and universal clamp-on filters. To find your particular application, please use our new search engines. If you do not see your particular application listed, please contact us.Installation InstructionsThis Part Fits: Year Make Model Submodel 2013-2019 Nissan Frontier Desert Runner 2005-2010 Nissan Frontier LE 2005-2008 Nissan Frontier Nismo Off-Road 2009-2019 Nissan Frontier PRO-4X 2011-2019 Nissan Frontier S 2005-2010 Nissan Frontier SE 2011-2019 Nissan Frontier SL 2011-2019 Nissan Frontier SV 2005-2012 Nissan Pathfinder LE 2006-2012 Nissan Pathfinder S 2005-2010 Nissan Pathfinder SE 2005-2009 Nissan Pathfinder SE Off-Road 2011-2012 Nissan Pathfinder Silver Edition 2011-2012 Nissan Pathfinder SV 2005 Nissan Pathfinder XE 2005-2010 Nissan Xterra Off-Road 2011-2015 Nissan Xterra PRO-4X 2005-2015 Nissan Xterra S 2005-2010 Nissan Xterra SE 2006-2015 Nissan Xterra X

Bringing you the next generation of intakes, the Momentum GT sealed air intake system is designed using the most up-to-date engineering tools and techniques to provide you with the perfect blend of power and protection. This intake system is superior in every way. From the one-piece sealed housing with a tire tread top, to the massive air filter and premium hardware, we spared no expense to give you the best intake on the market.Installation InstructionsThis Part Fits: Year Make Model Submodel 2004-2010 INFINITI QX56 Base 2005-2009 Nissan Armada LE 2010-2015 Nissan Armada Platinum 2005-2010 Nissan Armada SE 2005-2006 Nissan Armada SE Off-Road 2011-2015 Nissan Armada SL 2011-2015 Nissan Armada SV 2010 Nissan Armada Titanium 2004 Nissan Pathfinder Armada LE 2004 Nissan Pathfinder Armada SE 2004-2010 Nissan TITAN LE 2008-2015 Nissan TITAN PRO-4X 2011-2015 Nissan TITAN S 2004-2010 Nissan TITAN SE 2011-2015 Nissan TITAN SL 2011-2015 Nissan TITAN SV 2004-2010 Nissan TITAN XE

A custom computer designed roto-molded housing eliminates the use of multiple components and ensures the coolest air intake charge available. A clear sight window allows for filter inspection without removal of the airbox. The roto-molded housing is made out of black cross-linked polyethylene. The housing is designed to retain the same water fording height as the factory intake system while providing more air flow and better protection. This System uses a CAD designed, dyno-tuned, roto-molded intake tube to achieve maximum power gains while maintaining a perfect fit. This tube has built-in resonance chambers to catch un-wanted air intake noises. This Momentum GT intake system was designed around the largest filter possible to allow maximum performance and filtration. This filter has a massive 5" round flange and is 8" tall with an inverted top and features our pre-oiled Pro 5R media. The Pro 5R performance air filter features 5-layers of progressively finer mesh cotton media providing maximum airflow and performance. The unique air filter to housing interface (patent pending) allows for maximum filter size which increases the available air volume while simplifying the installation process. Premium stainless steel T-bolt clamps are used for durability and provide the best corrosion resistance possible. Momentum GT intakes are designed with fewer parts for a quick and simple installationThis Part Fits: Year Make Model Submodel 2010-2019 Toyota 4Runner Limited 2010-2019 Toyota 4Runner SR5 2018-2019 Toyota 4Runner SR5 Premium 2010-2016 Toyota 4Runner Trail 2017-2019 Toyota 4Runner TRD Off-Road 2018-2019 Toyota 4Runner TRD Off-Road Premium 2015-2019 Toyota 4Runner TRD Pro 2010-2014 Toyota FJ Cruiser Base

The Dynamic Air Scoop (D.A.S.) from aFe is a very simple bolt-on product that increases airflow and velocity into the Momentum GT air intake system through front grille area. This scoop is constructed of high quality cross-linked polyethylene plastic and made from heat soak resistant material for greater strength and unique styling. Dynamic Air scoops lower intake air temperatures by forcing more cool air from the front main grille area into the air intake auxiliary scoop. This Dynamic Air Scoop is constructed with roto-molded plastic and made from heat soak resistant material for greater strength and unique styling.Installation InstructionsThis Part Fits: Year Make Model Submodel 2012-2015 Toyota Tacoma Base 2012-2015 Toyota Tacoma Pre Runner 2015 Toyota Tacoma TRD Pro 2012-2013 Toyota Tacoma X-Runner

Bringing you the next generation of intakes, aFe is proud to introduce the Momentum GT Sealed intake system for the 2012-2015 Toyota Tacoma with the V6 4.0L engine. The Momentum GT sealed air intake system is designed using the most up-to-date engineering tools and techniques to provide you with the perfect blend of power and protection. This system is superior in every way. From the one-piece sealed housing, to the massive air filter, rotomolded tube premium hardware. Unique One-Piece Housing: The smooth one-piece sealed housing with auxiliary air scoop is used to eliminate the use of multiple-piece housings and ensure the coolest air intake charge available. A urethane plug is also included for those cold weather applications where you want to block the auxiliary air scoop. Roto-molded Tube: This System uses a CAD designed, dyno-tuned, roto-molded intake tube to achieve maximum power gains while maintaining a perfect fit. Large 5-Layer Performance Air Filter: This Momentum GT intake system was designed around the largest filter possible to allow maximum performance and filtration. This cone inverted top filter has a massive round flange and is 8" tall inverted top Pro 5R media. The Pro 5R performance air filter features 5-layers of progressive finer mesh cotton media providing maximum airflow and performance. The unique air filter to housing interface (patent pending) allows for maximum filter size which increases the available air volume while simplifying the installation process. Premium Hardware: Premium stainless steel T-bolt clamps are used to securely mount the high flow air filter to the 1-piece airbox. Momentum GT intakes are designed with fewer parts for a quick and simple installation.This Part Fits: Year Make Model Submodel 2012-2015 Toyota Tacoma Base 2012-2015 Toyota Tacoma Pre Runner 2015 Toyota Tacoma TRD Pro 2012-2013 Toyota Tacoma X-Runner

Unique One-Piece High Quality Housing W/ Sight Window: A custom CAD designed roto-molded housing made from heat soak resistant material eliminates the use of multiple components and ensures the coolest air intake charge available. A large clear sight window allows for filter inspection without removal of the air box. The roto-molded housing is made out of black cross-linked polyethylene.  A urethane plug is also included if you wish to block off the auxiliary air inlet. High Quality Tube: This system uses a high quality plastic CAD designed, dyno-tuned, roto-molded intake tube to achieve maximum power gains while maintaining a perfect fit. Large 5-Layer Performance Air Filter: This Momentum GT intake system was designed around the largest filter possible to allow maximum performance and filtration. This cone filter has a large (6-3/4" x 4-3/4") oval flange and is 9" tall with an inverted top. The Pro 5R performance air filter features 5-layers of progressively finer mesh cotton gauze oiled media and is constructed with 100% polyurethane frame for long life and multiple cleaning cycles. Premium Hardware: High quality premium clamps ensures the most secure installation available. Momentum intakes are designed with fewer parts for a quick and simple installation. This product does not require a CARB EO# (Vehicle does not exist in U.S.).Installation Instructions

Large Five Layer Performance Air Filter: Momentum’s innovative filter-to-housing interface was built to feature the largest air filter possible. This 9” tall 360-degree radial flow air filter features a large (6-3/4" x 4-3/4") oval flange and our pre-oiled Pro 5R media with five layers of progressively finer cotton gauze media for maximum performance. It provides your engine with the largest amount of high-flowing air and delivers the highest power gains in most cases. This media is perfect for street use. Its inverted top makes for more filter surface area, resulting in longer service intervals. Unique One-Piece Housing: The smooth one-piece sealed housing, constructed of heat-resistant cross-linked polyethylene (XLPE), features our patented/patent-pending filter-to-housing interface. Its innovative design minimizes the total number of parts, making for an easy installation. A large, clear sight window allows for hassle-free filter inspection, without having to disassemble your system. Its auxiliary air inlet can be used to pull in additional air, or can be closed with an included plug. Dyno-Tuned Intake Tube: This system features a high quality, computer-designed, dyno-tuned intake tube to achieve maximum power gains while maintaining a perfect fit. Its XLPE material is heat soak resistant and extremely durable. Premium Components: Momentum GT intakes are designed with fewer parts for a fast and easy installation. This is a direct fit intake system that utilizes factory mounting points and requires no cutting or modifications. All necessary clamps, couplings, and hardware are included. Emissions Disclaimer: This product does not require a CARB EO# (Vehicle does not exist in U.S.)

aFe POWER Dynamic Air Scoop (D.A.S.) is a simple bolt-on product meant to decrease the intake air temperature while increasing the airflow velocity. This scoop is constructed of high quality cross-linked polyethylene plastic and made from heat soak resistant material for greater strength and unique styling.This Part Fits: Year Make Model Submodel 2008-2011,2013-2021 Lexus LX570 Base 2008-2011,2013-2021 Toyota Land Cruiser Base