The AEM 21-796C Performance Cold Air Intake System produces horsepower and torque gains by replacing your vehicle's restrictive factory air filter and air intake housing. This air intake system was designed, tuned and dyno-tested to fit specific Hyundai Genesis Sedan models. Air enters the system through an oversized AEM Dryflow synthetic washable air filter for outstanding air flow, filtration and performance. The air filter is placed into the original air box location and is protected by a heat shield which is designed to reduce intake air temperature and increase horsepower. The air intake tube is constructed from mandrel-bent aluminum featuring a durable gunmetal gray powder coated finish. This air intake system was developed to accommodate the engine's factory emissions control devices including the pressure sensor and vent tubes. The tapered cylinder shaped AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). The air intake system is easy to install with commonly available tools and it is backed by AEM's Lifetime Limited Warranty. Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the 21-796C vehicle applications to determine the legal status for each vehicle.Installation InstructionsUser 1This Part Fits: Year Make Model Submodel 2015-2016 Hyundai Genesis 3.8

The AEM 21-795C Performance Cold Air Intake System produces horsepower and torque gains by replacing your vehicle's restrictive factory air filter and air intake housing. This air intake system was designed, tuned and dyno-tested to fit specific Honda Pilot and Ridgeline models. Air enters the system through an oversized AEM Dryflow synthetic washable air filter for outstanding air flow, filtration and performance. The air filter is placed into the original air box location and is protected by a heat shield which is designed to reduce intake air temperature and increase horsepower. The air intake tube is constructed from mandrel-bent aluminum featuring a durable gunmetal gray powder coated finish. This air intake system was developed to accommodate the engine's factory emissions control devices including the mass air flow sensor and vent tube. The tapered cylinder shaped AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). The air intake system is easy to install with commonly available tools and it is backed by AEM's Lifetime Limited Warranty. Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the 21-795C vehicle applications to determine the legal status for each vehicle.Installation InstructionsUser 1This Part Fits: Year Make Model Submodel 2024 Honda Passport Black Edition 2019-2023 Honda Passport Elite 2019-2024 Honda Passport EX-L 2019-2021 Honda Passport Sport 2019-2021 Honda Passport Touring 2022-2024 Honda Passport TrailSport 2020-2022 Honda Pilot Black Edition 2016-2022 Honda Pilot Elite 2016-2021 Honda Pilot EX 2016-2022 Honda Pilot EX-L 2016-2021 Honda Pilot LX 2021-2022 Honda Pilot Special Edition 2022 Honda Pilot Sport 2016-2022 Honda Pilot Touring 2022 Honda Pilot TrailSport 2017-2025 Honda Ridgeline Black Edition 2017-2019 Honda Ridgeline RT 2017-2025 Honda Ridgeline RTL 2017-2023 Honda Ridgeline RTL-E 2017-2019 Honda Ridgeline RTL-T 2017 Honda Ridgeline RTS 2017-2025 Honda Ridgeline Sport 2024-2025 Honda Ridgeline TrailSport

The AEM 21-793C Performance Cold Air Intake System produces horsepower and torque gains by replacing your vehicle's restrictive factory air filter and air intake housing. This air intake system was designed, tuned and dyno-tested to fit specific Nissan Maxima models. Air enters the system through an oversized AEM Dryflow synthetic washable air filter for outstanding air flow, filtration and performance. The air filter is placed into the original air box space and is protected by a heat shield which is designed to reduce intake air temperature and increase horsepower. The air intake tube is constructed from mandrel-bent aluminum featuring a durable gunmetal gray powder coated finish. This air intake system was developed to accommodate the engine's factory emissions control devices including the mass air flow sensor and engine vent hose. The tapered cylinder shaped AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). The air intake system is easy to install with commonly available tools and it is backed by AEM's Lifetime Limited Warranty. Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the 21-793C vehicle applications to determine the legal status for each vehicle.Installation InstructionsUser 1This Part Fits: Year Make Model Submodel 2021 Nissan Maxima 40th Anniversary Edition 2016-2023 Nissan Maxima Platinum 2020 Nissan Maxima Platinum Reserve 2016-2020 Nissan Maxima S 2016-2020 Nissan Maxima SL 2016-2023 Nissan Maxima SR 2016-2023 Nissan Maxima SV

The AEM 21-792C Performance Cold Air Intake System produces horsepower and torque gains by replacing your vehicle's restrictive factory air filter and air intake housing. This air intake system was designed, tuned and dyno-tested to fit specific Honda Civic models. Air enters the system through an oversized AEM Dryflow synthetic washable air filter for outstanding air flow, filtration and performance. The air filter is placed into the original air box space and is protected by a heat shield which is designed to reduce intake air temperature and increase horsepower. The air intake tube is constructed from mandrel-bent aluminum featuring a durable gunmetal gray powder coated finish. This air intake system was developed to accommodate the engine's factory emissions control devices including the mass air flow sensor and engine vent line. The tapered cylinder shaped AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). The air intake system is easy to install with commonly available tools and it is backed by AEM's Lifetime Limited Warranty. Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the 21-792C vehicle applications to determine the legal status for each vehicle.Installation InstructionsUser 1This Part Fits: Year Make Model Submodel 2016-2020 Honda Civic EX 2016-2021 Honda Civic LX 2016-2018 Honda Civic LX-P 2019-2021 Honda Civic Sport 2017 Honda Civic Type R

The AEM-21-791C Performance Cold Air Intake System produces horsepower and torque gains by replacing your vehicle's restrictive factory air filter and air intake housing. This air intake system was designed, tuned and dyno-tested to fit specific Lexus IS200T L4 2.0L models. Air enters the system through an oversized AEM Dryflow synthetic washable air filter for outstanding air flow, filtration and performance. The air filter is located in the original air box space and is protected by a heat shield which is designed to reduce intake air temperature and increase horsepower. The intake tubing is constructed from mandrel-bent aluminum featuring a durable gunmetal gray powder coated finish. This air intake system was developed to accommodate the engine's factory emissions control devices including the valve cover breather hose. The tapered cylinder shaped AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). The air intake system is easy to install with commonly available tools. Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the AEM-21-791C vehicle applications to determine the legal status for each vehicle.Installation InstructionsUser 1This Part Fits: Year Make Model Submodel 2016-2017 Lexus IS200t Base 2016-2017 Lexus IS200t F Sport 2018-2024 Lexus IS300 Base 2018-2020,2024 Lexus IS300 F Sport 2024 Lexus IS300 F Sport Design

The AEM 21-788C Performance Cold Air Intake System produces horsepower and torque gains by replacing your vehicle's restrictive factory air filter and air intake housing. This air intake system was designed, tuned and dyno-tested to fit specific Chevrolet Sonic models. Air enters the system through an oversized AEM Dryflow synthetic washable air filter for outstanding air flow, filtration and performance. The air filter is located in the original air box space and is protected by a heat shield which is designed to reduce intake air temperature and increase horsepower. The air intake tube is constructed from mandrel-bent aluminum featuring a durable gunmetal gray powder coated finish. This air intake system was developed to accommodate the engine's factory emissions control devices including the mass air sensor. The tapered cylinder shaped AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). The air intake system is easy to install with commonly available tools and it is backed by AEM's Lifetime Limited Warranty. Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the 21-788C vehicle applications to determine the legal status for each vehicle.Installation InstructionsUser 1This Part Fits: Year Make Model Submodel 2019-2020 Chevrolet Sonic LS 2012-2020 Chevrolet Sonic LT 2012-2016 Chevrolet Sonic LTZ 2017-2020 Chevrolet Sonic Premier 2013-2016 Chevrolet Sonic RS

The AEM-21-786C Performance Cold Air Intake System produces horsepower and torque gains by replacing your vehicle's restrictive factory air filter and air intake housing. This air intake system was designed, tuned and dyno-tested to fit select Mazda MX-5 Miata models. Air enters the system through an oversized AEM Dryflow synthetic washable air filter for outstanding air flow, filtration and performance. The air filter is located in the original air box space and is protected by a heat shield which is designed to reduce intake air temperature and increase horsepower. Attached to the heat shield is an aluminum coolant overflow reservoir that replaces the stock reservoir so that the air intake will fit properly. The air intake tubing is constructed from mandrel-bent aluminum featuring a durable gunmetal gray powder coated finish. This air intake system was developed to accommodate the engine's factory emissions control devices including the mass air flow sensor and PCV hose. The tapered cylinder shaped AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). The air intake system is easy to install with commonly available tools. Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the 21-786C vehicle applications to determine the legal status for each vehicle.Installation InstructionsUser 1This Part Fits: Year Make Model Submodel 2020 Mazda MX-5 Miata 100th Anniversary Special Edition 2016-2022 Mazda MX-5 Miata Club 2016-2022 Mazda MX-5 Miata Grand Touring 2020 Mazda MX-5 Miata RF 100th Anniversary Special Edition 2017-2022 Mazda MX-5 Miata RF Club 2017-2022 Mazda MX-5 Miata RF Grand Touring 2016-2022 Mazda MX-5 Miata Sport

The AEM 21-784C Performance Cold Air Intake System produces horsepower and torque gains by replacing your vehicle's restrictive factory air filter and air intake housing. This air intake system was designed, tuned and dyno-tested to fit specific Acura ILX models. Air enters the system through an oversized AEM Dryflow synthetic washable air filter for outstanding air flow, filtration and performance. The air filter is located in the original air box location and is protected by a heat shield which is designed to reduce intake air temperature and increase horsepower. The air intake tube is constructed from mandrel-bent aluminum featuring a durable gunmetal gray powder coated finish. This air intake system was developed to accommodate the engine's factory emissions control devices including the mass air flow sensor and PCV hose. The tapered cylinder shaped AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). The air intake system is easy to install with commonly available tools and it is backed by AEM's Lifetime Limited Warranty. Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the 21-784C vehicle applications to determine the legal status for each vehicle.Installation InstructionsUser 1This Part Fits: Year Make Model Submodel 2016-2019 Acura ILX Base

The AEM 21-783C Performance Cold Air Intake System produces horsepower and torque gains by replacing your vehicle's restrictive factory air filter and air intake housing. This air intake system was designed, tuned and dyno-tested to fit specific Hyundai Tucson models. Air enters the system through an oversized AEM Dryflow synthetic washable air filter for outstanding air flow, filtration and performance. The air filter is located in the original air box space and is protected by a heat shield which is designed to reduce intake air temperature and increase horsepower. The air intake tube is constructed from mandrel-bent aluminum featuring a durable gunmetal gray powder coated finish. This air intake system was developed to accommodate the engine's factory emissions control devices including the EVAP and other vent lines. The tapered cylinder shaped AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). The air intake system is easy to install with commonly available tools and it is backed by AEM's Lifetime Limited Warranty. Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the 21-783C vehicle applications to determine the legal status for each vehicle.Installation InstructionsUser 1This Part Fits: Year Make Model Submodel 2016-2017 Hyundai Tucson Eco 2016-2017 Hyundai Tucson Limited 2016-2017 Hyundai Tucson Sport 2017 Hyundai Tucson Value

The AEM 21-781DS Performance Cold Air Intake System produces horsepower and torque gains by replacing your vehicle's restrictive factory air filter and air intake housing. This air intake system was designed, tuned and dyno-tested to fit specific Mercedes Benz CLA250 models. Air enters the system from the factory fresh air inlets, through replacement air ducts and into a roto-molded, aerodynamic AEM air box containing an oversized AEM Dryflow synthetic washable air filter for outstanding air flow, filtration and performance. This air intake system was developed to accommodate the engine's factory emissions control devices including the ECU. The tapered cylinder shaped AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). The air intake system is easy to install with commonly available tools and it is backed by AEM's Lifetime Limited Warranty. Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the 21-781DS vehicle applications to determine the legal status for each vehicle.Installation InstructionsUser 1This Part Fits: Year Make Model Submodel 2014-2019 Mercedes-Benz CLA250 4Matic 2014-2019 Mercedes-Benz CLA250 Base 2015-2020 Mercedes-Benz GLA250 4Matic 2015-2020 Mercedes-Benz GLA250 Base

This Performance Air Intake System allows your engine to breathe more air compared to the restrictive factory air intake housing. It is designed, tuned and dyno-tested to produce more horsepower and torque. Air enters the system through an oversized AEM Dryflow synthetic washable air filter for outstanding air flow, filtration and performance. The air intake tube is constructed from mandrel-bent aluminum featuring a durable gunmetal gray powder coated finish. A custom shaped heat shield with a carbon fiber lid is included. The tapered cylinder shaped AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). This Air Intake System is backed by AEM's Lifetime Limited Warranty. Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the 21-780C vehicle applications to determine the legal status for each vehicle.Installation InstructionsTechnical DrawingThis Part Fits: Year Make Model Submodel 2022-2023 Lexus IS500 F Sport Performance 2022 Lexus IS500 F Sport Performance Launch Edition 2022-2023 Lexus IS500 F Sport Performance Premium 2015-2018 Lexus RC F Base

The AEM Performance Cold Air Intake System produces horsepower and torque gains by replacing your vehicle's restrictive factory air filter and air intake housing. This air intake system was designed, tuned and dyno-tested to fit specific models. Air enters the system through an oversized AEM Dryflow synthetic washable air filter for outstanding air flow, filtration and performance. The air filter is located in the original air box space and is protected by a heat shield which is designed to reduce intake air temperature and increase horsepower. The air intake tube is constructed from mandrel-bent aluminum featuring a durable gunmetal gray powder coated finish. This air intake system was developed to accommodate the engine's factory emissions control devices including the mass airflow sensor and breather tube. The tapered cylinder shaped AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). The air intake system is easy to install with commonly available tools and it is backed by AEM's Lifetime Limited Warranty. Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the vehicle applications to determine the legal status for each vehicle.Installation InstructionsUser 1This Part Fits: Year Make Model Submodel 2017-2018 Mazda 3 Grand Touring 2014-2016 Mazda 3 s Grand Touring 2014-2016 Mazda 3 s Touring 2017-2018 Mazda 3 Touring 2014-2020 Mazda 6 Grand Touring 2018-2020 Mazda 6 Signature 2014-2021 Mazda 6 Sport 2014-2021 Mazda 6 Touring 2017 Mazda CX-5 Grand Select 2015-2017 Mazda CX-5 Grand Touring 2015-2017 Mazda CX-5 Sport 2015-2017 Mazda CX-5 Touring

The AEM 21-778C Performance Cold Air Intake System produces horsepower and torque gains by replacing your vehicle's restrictive factory air filter and air intake housing. Air enters the system through an oversized AEM Dryflow synthetic washable air filter for outstanding air flow, filtration and performance. The air filter is relocated to be in driver-side wheel well which is designed to reduce intake air temperature and increase horsepower. The lower air intake tube is a free-flowing, mandrel-bent aluminum tube with a durable gunmetal gray powder coat finish. The upper air intake tube is a roto-molded, aerodynamically engineered, HDPE tube that insulates the cooler intake air from heat as it passes through the engine bay and into the engine's throttle body. This air intake system was developed to accommodate the Lancer's factory emissions control devices including the mass airflow sensor and PCV hose. The tapered cylinder shaped AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the 21-778C vehicle applications to determine the legal status for each vehicle.Installation InstructionsUser 1This Part Fits: Year Make Model Submodel 2015-2017 Mitsubishi Lancer ES 2015 Mitsubishi Lancer Evolution GSR 2015-2016 Mitsubishi Lancer GT 2015-2017 Mitsubishi Lancer SE 2016-2017 Mitsubishi Lancer SEL

The AEM-21-774DS Performance Cold Air Intake System produces horsepower and torque gains by replacing your vehicle's restrictive factory air filters and air intake housings. This air intake system was designed, tuned and dyno-tested to fit select Infiniti Q50 models. Air enters the system through dual AEM Dryflow synthetic washable air filters for outstanding air flow, filtration and performance. The air filters are located in the original air box spaces and are protected by heat shields which are designed to reduce intake air temperature and increase horsepower. Air is then fed to the engine through not one, but two air intake tubes. This air intake system was developed to accommodate the engine's factory emissions control devices including the mass air flow sensors and crankcase vent tube. The dual tapered cylinder shaped AEM Dryflow air filters are made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). The air intake system is easy to install with commonly available tools and it is backed by AEM's Lifetime Limited Warranty. Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards while others are 50 state legal. View the 21-774DS vehicle applications to determine the legal status for each vehicle.Installation InstructionsUser 1This Part Fits: Year Make Model Submodel 2014-2015 INFINITI Q50 Base 2014-2015 INFINITI Q50 Premium 2014-2015 INFINITI Q50 Sport

The AEM 21-773C Performance Cold Air Intake System produces horsepower and torque gains by replacing your vehicle's restrictive factory air filter and air intake housing. This air intake system was designed, tuned and dyno-tested to fit specific Mazda Mazda3 models. Air enters the system through an oversized AEM Dryflow synthetic washable air filter for outstanding air flow, filtration and performance. The air filter is located in the original airbox space and is protected by a heat shield which is designed to reduce intake air temperature and adapts to the factory cold air scoop. The air intake tube is constructed from mandrel-bent aluminum featuring a durable gunmetal gray powder coated finish. This air intake system was developed to accommodate the engine's factory emissions control devices including the mass air sensor and engine breather hose. The tapered cylinder shaped AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). The air intake system is easy to install with commonly available tools and it is backed by AEM's Lifetime Limited Warranty. Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the 21-773C vehicle applications to determine the legal status for each vehicle.Installation InstructionsUser 1This Part Fits: Year Make Model Submodel 2015-2016 Mazda 3 i Grand Touring 2015-2016 Mazda 3 I Sport 2015 Mazda 3 i SV 2015-2016 Mazda 3 I Touring 2017-2018 Mazda 3 Sport 2017-2018 Mazda 3 Touring

The AEM 21-772C Performance Cold Air Intake System produces horsepower and torque gains by replacing your vehicle's restrictive factory air filter and air intake housing. This air intake system was designed, tuned and dyno-tested to fit specific Subaru Impreza models. Air enters the system through an oversized AEM Dryflow synthetic washable air filter for outstanding air flow, filtration and performance. The air filter is located in the original air box space and is protected by a heat shield which is designed to reduce intake air temperature and increase horsepower. The air intake tube is constructed from mandrel-bent aluminum featuring a durable gunmetal gray powder coated finish. This air intake system was developed to accommodate the engine's factory emissions control devices including the mass airflow sensor. The tapered cylinder shaped AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). The air intake system is easy to install with commonly available tools and it is backed by AEM's Lifetime Limited Warranty. Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the 21-772C vehicle applications to determine the legal status for each vehicle.Installation InstructionsUser 1This Part Fits: Year Make Model Submodel 2016 Subaru Crosstrek Base 2016 Subaru Crosstrek Hybrid 2016 Subaru Crosstrek Hybrid Touring 2016 Subaru Crosstrek Limited 2016 Subaru Crosstrek Premium 2012-2016 Subaru Impreza Base 2012-2016 Subaru Impreza Limited 2012-2016 Subaru Impreza Premium 2012-2016 Subaru Impreza Sport Limited 2012-2016 Subaru Impreza Sport Premium 2015 Subaru XV Crosstrek Base 2014-2015 Subaru XV Crosstrek Hybrid 2014-2015 Subaru XV Crosstrek Hybrid Touring 2013-2015 Subaru XV Crosstrek Limited 2013-2015 Subaru XV Crosstrek Premium

The AEM 21-764C Performance Cold Air Intake System produces horsepower and torque gains by replacing your vehicle's restrictive factory air filter and air intake housing. This air intake system was designed, tuned and dyno-tested to fit specific Volkswagen Jetta, Jetta GLI, and Passat models. Air enters the system through an oversized AEM Dryflow synthetic washable air filter for outstanding air flow, filtration and performance. The air filter is located in the original air box location and is protected by a heat shield which is designed to reduce intake air temperature and increase horsepower. The air intake tube is constructed from mandrel-bent aluminum featuring a durable gunmetal gray powder coated finish. This air intake system was developed to accommodate the engine's factory emissions control devices including the PCV hose. The tapered cylinder shaped AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). The air intake system is easy to install with commonly available tools and it is backed by AEM's Lifetime Limited Warranty. Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the 21-764C vehicle applications to determine the legal status for each vehicle.Installation InstructionsUser 1This Part Fits: Year Make Model Submodel 2015 Volkswagen Jetta Base 2014,2017 Volkswagen Jetta GLI 2015-2016 Volkswagen Jetta GLI SE 2015-2016 Volkswagen Jetta GLI SEL 2014-2015 Volkswagen Jetta S 2014-2015 Volkswagen Jetta SE 2014-2017 Volkswagen Jetta SEL 2016 Volkswagen Jetta SEL Premium 2015-2017 Volkswagen Jetta Sport 2014 Volkswagen Jetta TDI 2014 Volkswagen Jetta TDI Premium 2015 Volkswagen Jetta TDI S 2015 Volkswagen Jetta TDI SE 2015 Volkswagen Jetta TDI SEL 2015 Volkswagen Passat Limited Edition 2016-2017 Volkswagen Passat R-Line 2014-2017 Volkswagen Passat S 2014-2017 Volkswagen Passat SE 2016 Volkswagen Passat SEL 2014-2017 Volkswagen Passat SEL Premium 2015 Volkswagen Passat Sport 2014-2015 Volkswagen Passat Wolfsburg Edition

The AEM 21-763C Performance Cold Air Intake System produces horsepower and torque gains by replacing your vehicle's restrictive factory air filter and air intake housing. This air intake system was designed, tuned and dyno-tested to fit specific Volkswagen Jetta models. Air enters the system through an oversized AEM Dryflow synthetic washable air filter for outstanding air flow, filtration and performance. The air filter is located in the original air box location and is protected by a heat shield which is designed to reduce intake air temperature and increase horsepower. The intake tubing is constructed from mandrel-bent aluminum featuring a durable gunmetal gray powder coated finish. This air intake system was developed to accommodate the engine's factory emissions control devices including the mass air flow sensor and vacuum line. The tapered cylinder shaped AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). The air intake system is easy to install with commonly available tools and it is backed by AEM's Lifetime Limited Warranty. Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the 21-763C vehicle applications to determine the legal status for each vehicle.Installation InstructionsUser 1This Part Fits: Year Make Model Submodel 2011 Volkswagen Jetta Base 2012-2014 Volkswagen Jetta GLI 2011-2014 Volkswagen Jetta S 2010-2014 Volkswagen Jetta TDI 2010 Volkswagen Jetta TDI Cup Edition 2012-2014 Volkswagen Jetta TDI Premium 2015-2016 Volkswagen Tiguan R-Line 2015-2017 Volkswagen Tiguan S 2015-2016 Volkswagen Tiguan SE 2015-2017 Volkswagen Tiguan SEL 2017 Volkswagen Tiguan Sport 2017 Volkswagen Tiguan Wolfsburg Edition

The AEM 21-759C Performance Cold Air Intake System produces horsepower and torque gains by replacing your vehicle's restrictive factory air filter and air intake housing. This air intake system was designed, tuned and dyno-tested to fit specific Lexus IS250 and IS350 models. Air enters the system through an oversized AEM Dryflow synthetic washable air filter for outstanding air flow, filtration and performance. The air filter is located in the original air box space and is protected by a heat shield which is designed to reduce intake air temperature and increase horsepower. The intake tubing is constructed from mandrel-bent aluminum featuring a durable gunmetal gray powder coated finish. This air intake system was developed to accommodate the engine's factory emissions control devices including the mass air flow sensor and PCV hose. The tapered cylinder shaped AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). The air intake system is easy to install with commonly available tools. Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the 21-759C vehicle applications to determine the legal status for each vehicle.Installation InstructionsUser 1This Part Fits: Year Make Model Submodel 2014-2015 Lexus IS250 Base 2014-2015 Lexus IS250 C 2014-2015 Lexus IS250 C F Sport 2014-2015 Lexus IS250 F Sport 2014-2017 Lexus IS350 Base 2014-2015 Lexus IS350 C 2014-2015 Lexus IS350 C F Sport 2014-2017 Lexus IS350 F Sport

The AEM 21-753C Performance Cold Air Intake System produces horsepower and torque gains by replacing your vehicle's restrictive factory air filter and air intake housing. This air intake system was designed, tuned and dyno-tested to fit specific Chrysler 200 models. Air enters the system through an oversized AEM Dryflow synthetic washable air filter for outstanding air flow, filtration and performance. The air filter is located in the original air box space and is protected by a heat shield which is designed to reduce intake air temperature and increase horsepower. The intake tubing is constructed from mandrel-bent aluminum featuring a durable gunmetal gray powder coated finish. This air intake system was developed to accommodate the engine's factory emissions control devices including the inlet air temperature sensor and vent hose. The tapered cylinder shaped AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). The air intake system is easy to install with commonly available tools and it is backed by AEM's Lifetime Limited Warranty. Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the 21-753C vehicle applications to determine the legal status for each vehicle.Installation InstructionsUser 1This Part Fits: Year Make Model Submodel 2015-2016 Chrysler 200 C 2015-2016 Chrysler 200 Limited 2015-2016 Chrysler 200 LX 2015-2016 Chrysler 200 S

The AEM 21-750 Performance Cold Air Intake System produces horsepower and torque gains by replacing your vehicle's restrictive factory air filter and air intake housing. This air intake system was designed, tuned and dyno-tested to fit specific Audi A4 and A5 models. Air enters the system through an oversized AEM Dryflow synthetic washable air filter for outstanding air flow, filtration and performance. The air filter is located in the original air box location and can optionally be protected by an AEM embossed heat shield which is designed to reduce intake air temperature and increase horsepower. This air intake system was developed to accommodate the engine's factory emissions control devices including the mass air flow sensor. The tapered cylinder shaped AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). The air intake system is easy to install with commonly available tools and it is backed by AEM's Lifetime Limited Warranty. Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the AEM 21-750 vehicle applications to determine the legal status for each vehicle.Installation InstructionsUser 1This Part Fits: Year Make Model Submodel 2013-2014 Audi A4 Base 2015-2016 Audi A4 Premium 2015-2016 Audi A4 Premium Plus 2015 Audi A4 Prestige 2014 Audi A5 Cabriolet

AEM Performance Cold Air Intake Systems produce horsepower and torque gains by replacing your vehicle's restrictive factory air filter and air intake housing. This air intake system was designed, tuned and dyno-tested to fit specific Chevrolet Cruze models. Air enters the system through an oversized AEM Dryflow synthetic washable air filter for outstanding air flow, filtration and performance. The air filter is located in the original air box space and is protected by a heat shield which is designed to reduce intake air temperature and increase horsepower. The air intake tubing is constructed from mandrel-bent aluminum featuring a durable gunmetal gray powder coated finish. This air intake system was developed to accommodate the engine's factory emissions control devices including the mass air sensor. The tapered cylinder shaped AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). This air intake system is easy to install with commonly available tools. Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the vehicle applications to determine the legal status for each vehicle.Installation InstructionsUser 1This Part Fits: Year Make Model Submodel 2011-2015 Chevrolet Cruze Eco 2016 Chevrolet Cruze L 2016 Chevrolet Cruze LS 2011-2016 Chevrolet Cruze LT 2011-2015 Chevrolet Cruze LTZ 2016 Chevrolet Cruze Premier 2016 Chevrolet Cruze Limited Eco 2016 Chevrolet Cruze Limited LT 2016 Chevrolet Cruze Limited LTZ

The AEM 21-738C Performance Cold Air Intake System produces horsepower and torque gains by replacing your vehicle's restrictive factory air filter and air intake housing. This air intake system was designed, tuned and dyno-tested to fit specific KIA Soul models. Air enters the system through an oversized AEM Dryflow synthetic washable air filter for outstanding air flow, filtration and performance. The air filter is relocated to the driver-side wheel well which is designed to reduce intake air temperature and increase horsepower. The intake tubing is constructed from mandrel-bent aluminum featuring a durable gunmetal gray powder coated finish. This air intake system was developed to accommodate the engine's factory emissions control devices including the valve cover breather hose. The tapered cylinder shaped AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). The air intake system is backed by AEM's Lifetime Limited Warranty. Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the 21-738C vehicle applications to determine the legal status for each vehicle.Installation InstructionsUser 1This Part Fits: Year Make Model Submodel 2014-2016 Kia Soul ! 2014-2016 Kia Soul +

AEM Cold Air Intake Systems are designed to produce horsepower and torque gains. They replace the restrictive factory airbox and air filter to give you better performance and better engine sound. AEM cold air intakes relocate the air filter outside the engine compartment so cooler air can be fed into your engine. Cooler air carries more oxygen, which translates into a more intense explosion in the combustion chamber for more horsepower and torque. AEM Cold Air Intakes include an oversized AEM Dryflow synthetic washable air filter for outstanding air flow, filtration, and performance while allowing easy oil-free cleaning. They include a mandrel-bent aluminum intake tube and high quality hardware designed to reduce restriction and reduce intake temperature. The design and components of each intake system vary so consult the installation instructions for more information on the contents of each part number. This Air Intake cannot be sold in California. It is not legal for use in California or other states adopting California emission standards.Installation InstructionsUser 1This Part Fits: Year Make Model Submodel 2011-2014 Hyundai Sonata GLS 2011-2014 Hyundai Sonata Hybrid 2013-2014 Hyundai Sonata Hybrid Limited 2011-2014 Hyundai Sonata Limited 2011-2014 Hyundai Sonata SE 2011-2014 Kia Optima EX 2011-2012 Kia Optima Hybrid 2013-2014 Kia Optima Hybrid EX 2013-2014 Kia Optima Hybrid LX 2011-2014 Kia Optima LX 2014 Kia Optima SX

AEM Cold Air Intake Systems are designed to produce horsepower and torque gains. They replace the restrictive factory airbox and air filter to give you better performance and better engine sound. AEM cold air intakes relocate the air filter outside the engine compartment so cooler air can be fed into your engine. Cooler air carries more oxygen, which translates into a more intense explosion in the combustion chamber for more horsepower and torque. AEM Cold Air Intakes include an oversized AEM Dryflow synthetic washable air filter for outstanding air flow, filtration, and performance while allowing easy oil-free cleaning. They include a mandrel-bent aluminum intake tube and high quality hardware designed to reduce restriction and reduce intake temperature. The design and components of each intake system vary so consult the installation instructions for more information on the contents of each part number. This Air Intake cannot be sold in California. It is not legal for use in California or other states adopting California emission standards.Installation InstructionsUser 1This Part Fits: Year Make Model Submodel 2012-2014 Volkswagen Beetle Base 2011-2014 Volkswagen Golf Base 2011-2013 Volkswagen Jetta S 2011-2013 Volkswagen Jetta SE 2011-2013 Volkswagen Jetta SEL 2012-2014 Volkswagen Passat S 2012-2014 Volkswagen Passat SE 2012-2013 Volkswagen Passat SEL 2012-2013 Volkswagen Passat SEL Premium 2013-2014 Volkswagen Passat Wolfsburg Edition

The AEM 21-732C Performance Cold Air Intake System produces horsepower and torque gains by replacing your vehicle's restrictive factory air filter and air intake housing. This air intake system was designed, tuned and dyno-tested to fit specific Subaru WRX models. Air enters the system through an oversized AEM Dryflow synthetic washable air filter for outstanding air flow, filtration and performance. The air filter is located in the original air box space and is protected by a heat shield which is designed to reduce intake air temperature and increase horsepower. The intake tubing is constructed from mandrel-bent aluminum featuring a durable gunmetal gray powder coated finish. This air intake system was developed to accommodate the engine's factory emissions control devices including the mass air flow sensor. The tapered cylinder shaped AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). The air intake system is easy to install with commonly available tools and it is backed by AEM's Lifetime Limited Warranty. Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the 21-732C vehicle applications to determine the legal status for each vehicle.Installation InstructionsUser 1This Part Fits: Year Make Model Submodel 2015-2020 Subaru WRX Base 2015-2020 Subaru WRX Limited 2015-2020 Subaru WRX Premium

The AEM 21-730C Performance Cold Air Intake System produces horsepower and torque gains by replacing your vehicle's restrictive factory air filter and air intake housing. This air intake system was designed, tuned and dyno-tested to fit specific Hyundai Genesis Coupe models. Air enters the system through an oversized AEM Dryflow synthetic washable air filter for outstanding air flow, filtration and performance. The air filter is located in the original air box space and is protected by a heat shield with a replacement fresh air adapter scoop which is designed to reduce intake air temperature and increase horsepower. The intake tubing is constructed from mandrel-bent aluminum featuring a durable gunmetal gray powder coated finish. This air intake system was developed to accommodate the engine's factory emissions control devices including the air temperature sensor, engine breather tube and sound tube. The tapered cylinder shaped AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). The air intake system is easy to install with commonly available tools and it is backed by AEM's Lifetime Limited Warranty. Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the 21-730C vehicle applications to determine the legal status for each vehicle.Installation InstructionsUser 1This Part Fits: Year Make Model Submodel 2015-2016 Hyundai Genesis Coupe 3.8 2013-2014 Hyundai Genesis Coupe 3.8 Grand Touring 2013-2016 Hyundai Genesis Coupe 3.8 R-Spec 2013 Hyundai Genesis Coupe 3.8 Track 2014-2016 Hyundai Genesis Coupe 3.8 Ultimate

The AEM 21-728C Performance Cold Air Intake System produces horsepower and torque gains by replacing your vehicle's restrictive factory air filter and air intake housing. This air intake system was designed, tuned and dyno-tested to fit specific Hyundai Genesis Coupe models. Air enters the system through an oversized AEM Dryflow synthetic washable air filter for outstanding air flow, filtration and performance. The air filter is located in the original air box space and is protected by a heat shield with a replacement air scoop adapter which is designed to reduce intake air temperature and increase horsepower. The intake tubing is constructed from mandrel-bent aluminum featuring a durable gunmetal gray powder coated finish. This air intake system was developed to accommodate the engine's factory emissions control devices including the mass air flow sensor. The tapered cylinder shaped AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). The air intake system is backed by AEM's Lifetime Limited Warranty. Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards while others are 50 state legal. View the 21-728C vehicle applications to determine the legal status for each vehicle.Installation InstructionsUser 1This Part Fits: Year Make Model Submodel 2013-2014 Hyundai Genesis Coupe 2.0T 2013-2014 Hyundai Genesis Coupe 2.0T Premium 2013-2014 Hyundai Genesis Coupe 2.0T R-Spec

The AEM 21-721C Performance Cold Air Intake System produces horsepower and torque gains by replacing your vehicle's restrictive factory air filter and air intake housing. This air intake system was designed, tuned and dyno-tested to fit specific Mini Cooper S, S Clubman and John Cooper Works models. Air enters the system through an oversized AEM Dryflow synthetic washable air filter for outstanding air flow, filtration and performance. The air filter is located in the original air box space and is protected by a replacement air box with a fully-opened hood scoop which is designed to reduce intake air temperature and increase horsepower. The intake tubing is constructed from mandrel-bent aluminum featuring a durable black powder coated finish. This air intake system was developed to accommodate the engine's factory emissions control devices including the mass air flow sensor and vacuum line port. The cylinder shaped AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). The air intake system is backed by AEM's Lifetime Limited Warranty. Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards while others are 50 state legal. View the 21-721C vehicle applications to determine the legal status for each vehicle.Installation InstructionsUser 1This Part Fits: Year Make Model Submodel 2011 Mini Cooper Base 2012-2013 Mini Cooper Coupe John Cooper Works 2012-2013 Mini Cooper Coupe S 2011-2013 Mini Cooper John Cooper Works 2011-2013 Mini Cooper John Cooper Works Clubman 2013 Mini Cooper John Cooper Works GP 2013 Mini Cooper Roadster 2012-2013 Mini Cooper Roadster John Cooper Works 2012-2013 Mini Cooper Roadster S 2011-2013 Mini Cooper S 2011-2013 Mini Cooper S Clubman 2011 Mini Cooper Countryman Base 2012 Mini Cooper Countryman S 2012 Mini Cooper Countryman S ALL4

The AEM 21-715P Performance Cold Air Intake System produces horsepower and torque gains by replacing your vehicle's restrictive factory air filter and air intake housing. This air intake system was designed, tuned and dyno-tested to fit specific Hyundai Veloster models. Air enters the system through an oversized AEM Dryflow synthetic washable air filter for outstanding air flow, filtration and performance. The air filter is relocated to the driver-side wheel well which is designed to reduce intake air temperature and increase horsepower. The intake tubing is constructed from mandrel-bent aluminum featuring a durable chrome-like finish. This air intake system was developed to accommodate the engine's factory emissions control devices including a replacement silicone breather hose. The tapered cylinder shaped AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). The air intake system is backed by AEM's Lifetime Limited Warranty. Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the 21-715P vehicle applications to determine the legal status for each vehicle.Installation InstructionsUser 1This Part Fits: Year Make Model Submodel 2012-2017 Hyundai Veloster Base 2014-2015 Hyundai Veloster RE:FLEX 2017 Hyundai Veloster Turbo 2017 Hyundai Veloster Turbo R-Spec 2017 Hyundai Veloster Value Edition

The AEM 21-715C Performance Cold Air Intake System produces horsepower and torque gains by replacing your vehicle's restrictive factory air filter and air intake housing. This air intake system was designed, tuned and dyno-tested to fit specific Hyundai Veloster models. Air enters the system through an oversized AEM Dryflow synthetic washable air filter for outstanding air flow, filtration and performance. The air filter is relocated to the driver-side wheel well which is designed to reduce intake air temperature and increase horsepower. The intake tubing is constructed from mandrel-bent aluminum featuring a durable gunmetal gray powder coated finish. This air intake system was developed to accommodate the engine's factory emissions control devices including a replacement silicone breather hose. The tapered cylinder shaped AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). The air intake system is backed by AEM's Lifetime Limited Warranty. Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the 21-715C vehicle applications to determine the legal status for each vehicle.Installation InstructionsUser 1This Part Fits: Year Make Model Submodel 2012-2017 Hyundai Veloster Base 2014-2015 Hyundai Veloster RE:FLEX 2017 Hyundai Veloster Turbo 2017 Hyundai Veloster Turbo R-Spec 2017 Hyundai Veloster Value Edition

The AEM 21-714C Performance Cold Air Intake System produces horsepower and torque gains by replacing your vehicle's restrictive factory air filter and air intake housing. This air intake system was designed, tuned and dyno-tested to fit specific Honda Civic models. Air enters the system through an oversized AEM Dryflow synthetic washable air filter for outstanding air flow, filtration and performance. The air filter is relocated to the driver-side wheel well which is designed to reduce intake air temperature and increase horsepower. The intake tubing is constructed from mandrel-bent aluminum featuring a durable gunmetal gray powder coated finish. This air intake system was developed to accommodate the engine's factory emissions control devices including the mass air flow sensor and PCV hose. The tapered cylinder shaped AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). The air intake system is backed by AEM's Lifetime Limited Warranty. Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the 21-714C vehicle applications to determine the legal status for each vehicle.Installation InstructionsUser 1This Part Fits: Year Make Model Submodel 2012 Honda Civic DX 2012-2014 Honda Civic EX 2012-2014 Honda Civic EX-L 2012 Honda Civic GX 2012-2014 Honda Civic HF 2012-2014 Honda Civic LX 2013-2014 Honda Civic Natural Gas

The AEM 21-702C Performance Cold Air Intake System produces horsepower and torque gains by replacing your vehicle's restrictive factory air filter and air intake housing. This air intake system was designed, tuned and dyno-tested to fit specific Ford Focus models. Air enters the system through an oversized AEM Dryflow synthetic washable air filter for outstanding air flow, filtration and performance. The air filter is relocated to the driver-side wheel well which is designed to reduce intake air temperature and increase horsepower. The intake tubing is constructed from mandrel-bent aluminum featuring a durable gunmetal gray powder coated finish. This air intake system was developed to accommodate the engine's factory emissions control devices including the PCV hose and mass air flow sensor (which includes an AEM extension harness). The tapered cylinder shaped AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). The air intake system is backed by AEM's Lifetime Limited Warranty. Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the 21-702C vehicle applications to determine the legal status for each vehicle.Installation InstructionsUser 1This Part Fits: Year Make Model Submodel 2012 Ford Focus S 2012 Ford Focus SE 2012 Ford Focus SEL 2012 Ford Focus Titanium

The AEM 21-699C Performance Cold Air Intake System produces horsepower and torque gains by replacing your vehicle's restrictive factory air filter and air intake housing. This air intake system was designed, tuned and dyno-tested to fit specific Mini Cooper S and S Clubman models. Air enters the system through an oversized AEM Dryflow synthetic washable air filter for outstanding air flow, filtration and performance. The air filter is protected by a heat shield and a replacement air box with a fully opened hood scoop which is designed to reduce intake air temperature and increase horsepower. The intake tubing is constructed from mandrel-bent aluminum featuring a durable gunmetal gray powder coated finish. This air intake system was developed to accommodate the engine's factory emissions control devices including the mass air flow sensor. The cylinder shaped AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). The air intake system is backed by AEM's Lifetime Limited Warranty. Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards while others are 50 state legal. View the 21-699C vehicle applications to determine the legal status for each vehicle.Installation InstructionsUser 1Technical BulletinThis Part Fits: Year Make Model Submodel 2007-2010 Mini Cooper S 2010 Mini Cooper S Clubman

The AEM 21-698C Performance Cold Air Intake System produces horsepower and torque gains by replacing your vehicle's restrictive factory air filter and air intake housing. This air intake system was designed, tuned and dyno-tested to fit specific Mitsubishi Lancer Ralliart models. Air enters the system through an oversized AEM Dryflow synthetic washable air filter for outstanding air flow, filtration and performance. The air filter is located in the original air box space and is protected by a replacement air box with a logo embossed aluminum lid which is designed to reduce intake air temperature and increase horsepower. The intake tubing is constructed from mandrel-bent aluminum featuring a durable black powder coated finish. This air intake system was developed to accommodate the engine's factory emissions control devices including the mass air flow sensor, waste gate solenoid and valve cover breather hose as well as a replacement AEM filter minder. The cylinder shaped AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). The air intake system is backed by AEM's Lifetime Limited Warranty. Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards while others are 50 state legal. View the 21-698C vehicle applications to determine the legal status for each vehicle.Installation InstructionsUser 1Technical BulletinThis Part Fits: Year Make Model Submodel 2009-2014 Mitsubishi Lancer Ralliart 2010-2011 Mitsubishi Lancer Ralliart Sportback

The AEM 21-687P Performance Cold Air Intake System produces horsepower and torque gains by replacing your vehicle's restrictive factory air filter and air intake housing. This air intake system was designed, tuned and dyno-tested to fit specific Hyundai Genesis Coupe models. Air enters the system through an oversized AEM Dryflow synthetic washable air filter for outstanding air flow, filtration and performance. The air filter is located in the original air box space which is designed to reduce intake air temperature and increase horsepower. The intake tubing is constructed from mandrel-bent aluminum featuring a durable chrome-like finish. This air intake system was developed to accommodate the engine's factory emissions control devices including the engine breather hoses. A replacement windshield washer bottle is included to adapt to the new shape of the air intake system. The tapered cylinder shaped AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards while others are 50 state legal. View the 21-687P vehicle applications to determine the legal status for each vehicle.Installation InstructionsUser 1This Part Fits: Year Make Model Submodel 2010-2012 Hyundai Genesis Coupe 2.0T 2010-2012 Hyundai Genesis Coupe 2.0T Premium 2010-2012 Hyundai Genesis Coupe 2.0T R-Spec 2010 Hyundai Genesis Coupe 2.0T Track