The AEM AEM-21-743C Performance Cold Air Intake System produces horsepower and torque gains by replacing your vehicle's restrictive factory air filter and air intake housing. This air intake system was designed, tuned and dyno-tested to fit specific Ford Fusion models. Air enters the system through an oversized AEM Dryflow synthetic washable air filter for outstanding air flow, filtration and performance. The air filter is located in the lower air box space and is protected by a heat shield which is designed to reduce intake air temperature and increase horsepower. The intake tubing is constructed from mandrel-bent aluminum featuring a durable gunmetal gray powder coated finish. This air intake system was developed to accommodate the engine's factory emissions control devices including the intake air temperature sensor and vent line. The tapered cylinder shaped AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). The air intake system is easy to install with commonly available tools and it is backed by AEM's Lifetime Limited Warranty. Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the AEM-21-743C vehicle applications to determine the legal status for each vehicle.Installation InstructionsUser 1This Part Fits: Year Make Model Submodel 2014-2016 Ford Fusion Energi SE 2014-2016 Ford Fusion Energi Titanium 2014-2016 Ford Fusion S Hybrid 2014-2016 Ford Fusion SE 2014-2016 Ford Fusion SE Hybrid 2014-2016 Ford Fusion Titanium 2014-2016 Ford Fusion Titanium Hybrid

The AEM 21-738C Performance Cold Air Intake System produces horsepower and torque gains by replacing your vehicle's restrictive factory air filter and air intake housing. This air intake system was designed, tuned and dyno-tested to fit specific KIA Soul models. Air enters the system through an oversized AEM Dryflow synthetic washable air filter for outstanding air flow, filtration and performance. The air filter is relocated to the driver-side wheel well which is designed to reduce intake air temperature and increase horsepower. The intake tubing is constructed from mandrel-bent aluminum featuring a durable gunmetal gray powder coated finish. This air intake system was developed to accommodate the engine's factory emissions control devices including the valve cover breather hose. The tapered cylinder shaped AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). The air intake system is backed by AEM's Lifetime Limited Warranty. Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the 21-738C vehicle applications to determine the legal status for each vehicle.Installation InstructionsUser 1This Part Fits: Year Make Model Submodel 2014-2016 Kia Soul ! 2014-2016 Kia Soul +

AEM Cold Air Intake Systems are designed to produce horsepower and torque gains. They replace the restrictive factory airbox and air filter to give you better performance and better engine sound. AEM cold air intakes relocate the air filter outside the engine compartment so cooler air can be fed into your engine. Cooler air carries more oxygen, which translates into a more intense explosion in the combustion chamber for more horsepower and torque. AEM Cold Air Intakes include an oversized AEM Dryflow synthetic washable air filter for outstanding air flow, filtration, and performance while allowing easy oil-free cleaning. They include a mandrel-bent aluminum intake tube and high quality hardware designed to reduce restriction and reduce intake temperature. The design and components of each intake system vary so consult the installation instructions for more information on the contents of each part number. This Air Intake cannot be sold in California. It is not legal for use in California or other states adopting California emission standards.Installation InstructionsUser 1This Part Fits: Year Make Model Submodel 2011-2014 Hyundai Sonata GLS 2011-2014 Hyundai Sonata Hybrid 2013-2014 Hyundai Sonata Hybrid Limited 2011-2014 Hyundai Sonata Limited 2011-2014 Hyundai Sonata SE 2011-2014 Kia Optima EX 2011-2012 Kia Optima Hybrid 2013-2014 Kia Optima Hybrid EX 2013-2014 Kia Optima Hybrid LX 2011-2014 Kia Optima LX 2014 Kia Optima SX

AEM Cold Air Intake Systems are designed to produce horsepower and torque gains. They replace the restrictive factory airbox and air filter to give you better performance and better engine sound. AEM cold air intakes relocate the air filter outside the engine compartment so cooler air can be fed into your engine. Cooler air carries more oxygen, which translates into a more intense explosion in the combustion chamber for more horsepower and torque. AEM Cold Air Intakes include an oversized AEM Dryflow synthetic washable air filter for outstanding air flow, filtration, and performance while allowing easy oil-free cleaning. They include a mandrel-bent aluminum intake tube and high quality hardware designed to reduce restriction and reduce intake temperature. The design and components of each intake system vary so consult the installation instructions for more information on the contents of each part number.Installation InstructionsUser 1This Part Fits: Year Make Model Submodel 2015-2016 Subaru WRX Base 2015-2016 Subaru WRX Limited 2015-2016 Subaru WRX Premium 2015-2017 Subaru WRX STI Base 2015 Subaru WRX STI Launch Edition 2015-2017 Subaru WRX STI Limited 2016 Subaru WRX STI Series.HyperBlue

The AEM 21-734C Performance Cold Air Intake System produces horsepower and torque gains by replacing your vehicle's restrictive factory air filter and air intake housing. This air intake system was designed, tuned and dyno-tested to fit specific Nissan Juke models. Air enters the system through an oversized AEM Dryflow synthetic washable air filter for outstanding air flow, filtration and performance. The air filter is relocated to the driver-side wheel well which is designed to reduce intake air temperature and increase horsepower. The intake tubing is constructed from mandrel-bent aluminum featuring a durable gunmetal gray powder coated finish. This air intake system was developed to accommodate the engine's factory emissions control devices including the mass air flow sensor. The tapered oval shaped AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). The air intake system is backed by AEM's Lifetime Limited Warranty. Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the 21-734C vehicle applications to determine the legal status for each vehicle.Installation InstructionsUser 1This Part Fits: Year Make Model Submodel 2013-2016 Nissan Juke Nismo 2014-2016 Nissan Juke Nismo RS 2012-2016 Nissan Juke S 2012-2016 Nissan Juke SL 2012-2016 Nissan Juke SV

AEM Cold Air Intake Systems are designed to produce horsepower and torque gains. They replace the restrictive factory airbox and air filter to give you better performance and better engine sound. AEM cold air intakes relocate the air filter outside the engine compartment so cooler air can be fed into your engine. Cooler air carries more oxygen, which translates into a more intense explosion in the combustion chamber for more horsepower and torque. AEM Cold Air Intakes include an oversized AEM Dryflow synthetic washable air filter for outstanding air flow, filtration, and performance while allowing easy oil-free cleaning. They include a mandrel-bent aluminum intake tube and high quality hardware designed to reduce restriction and reduce intake temperature. The design and components of each intake system vary so consult the installation instructions for more information on the contents of each part number. This Air Intake cannot be sold in California. It is not legal for use in California or other states adopting California emission standards.Installation InstructionsUser 1This Part Fits: Year Make Model Submodel 2012-2014 Volkswagen Beetle Base 2011-2014 Volkswagen Golf Base 2011-2013 Volkswagen Jetta S 2011-2013 Volkswagen Jetta SE 2011-2013 Volkswagen Jetta SEL 2012-2014 Volkswagen Passat S 2012-2014 Volkswagen Passat SE 2012-2013 Volkswagen Passat SEL 2012-2013 Volkswagen Passat SEL Premium 2013-2014 Volkswagen Passat Wolfsburg Edition

The AEM 21-732C Performance Cold Air Intake System produces horsepower and torque gains by replacing your vehicle's restrictive factory air filter and air intake housing. This air intake system was designed, tuned and dyno-tested to fit specific Subaru WRX models. Air enters the system through an oversized AEM Dryflow synthetic washable air filter for outstanding air flow, filtration and performance. The air filter is located in the original air box space and is protected by a heat shield which is designed to reduce intake air temperature and increase horsepower. The intake tubing is constructed from mandrel-bent aluminum featuring a durable gunmetal gray powder coated finish. This air intake system was developed to accommodate the engine's factory emissions control devices including the mass air flow sensor. The tapered cylinder shaped AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). The air intake system is easy to install with commonly available tools and it is backed by AEM's Lifetime Limited Warranty. Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the 21-732C vehicle applications to determine the legal status for each vehicle.Installation InstructionsUser 1This Part Fits: Year Make Model Submodel 2015-2020 Subaru WRX Base 2015-2020 Subaru WRX Limited 2015-2020 Subaru WRX Premium

The AEM 21-730C Performance Cold Air Intake System produces horsepower and torque gains by replacing your vehicle's restrictive factory air filter and air intake housing. This air intake system was designed, tuned and dyno-tested to fit specific Hyundai Genesis Coupe models. Air enters the system through an oversized AEM Dryflow synthetic washable air filter for outstanding air flow, filtration and performance. The air filter is located in the original air box space and is protected by a heat shield with a replacement fresh air adapter scoop which is designed to reduce intake air temperature and increase horsepower. The intake tubing is constructed from mandrel-bent aluminum featuring a durable gunmetal gray powder coated finish. This air intake system was developed to accommodate the engine's factory emissions control devices including the air temperature sensor, engine breather tube and sound tube. The tapered cylinder shaped AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). The air intake system is easy to install with commonly available tools and it is backed by AEM's Lifetime Limited Warranty. Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the 21-730C vehicle applications to determine the legal status for each vehicle.Installation InstructionsUser 1This Part Fits: Year Make Model Submodel 2015-2016 Hyundai Genesis Coupe 3.8 2013-2014 Hyundai Genesis Coupe 3.8 Grand Touring 2013-2016 Hyundai Genesis Coupe 3.8 R-Spec 2013 Hyundai Genesis Coupe 3.8 Track 2014-2016 Hyundai Genesis Coupe 3.8 Ultimate

The AEM 21-728C Performance Cold Air Intake System produces horsepower and torque gains by replacing your vehicle's restrictive factory air filter and air intake housing. This air intake system was designed, tuned and dyno-tested to fit specific Hyundai Genesis Coupe models. Air enters the system through an oversized AEM Dryflow synthetic washable air filter for outstanding air flow, filtration and performance. The air filter is located in the original air box space and is protected by a heat shield with a replacement air scoop adapter which is designed to reduce intake air temperature and increase horsepower. The intake tubing is constructed from mandrel-bent aluminum featuring a durable gunmetal gray powder coated finish. This air intake system was developed to accommodate the engine's factory emissions control devices including the mass air flow sensor. The tapered cylinder shaped AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). The air intake system is backed by AEM's Lifetime Limited Warranty. Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards while others are 50 state legal. View the 21-728C vehicle applications to determine the legal status for each vehicle.Installation InstructionsUser 1This Part Fits: Year Make Model Submodel 2013-2014 Hyundai Genesis Coupe 2.0T 2013-2014 Hyundai Genesis Coupe 2.0T Premium 2013-2014 Hyundai Genesis Coupe 2.0T R-Spec

The AEM 21-721C Performance Cold Air Intake System produces horsepower and torque gains by replacing your vehicle's restrictive factory air filter and air intake housing. This air intake system was designed, tuned and dyno-tested to fit specific Mini Cooper S, S Clubman and John Cooper Works models. Air enters the system through an oversized AEM Dryflow synthetic washable air filter for outstanding air flow, filtration and performance. The air filter is located in the original air box space and is protected by a replacement air box with a fully-opened hood scoop which is designed to reduce intake air temperature and increase horsepower. The intake tubing is constructed from mandrel-bent aluminum featuring a durable black powder coated finish. This air intake system was developed to accommodate the engine's factory emissions control devices including the mass air flow sensor and vacuum line port. The cylinder shaped AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). The air intake system is backed by AEM's Lifetime Limited Warranty. Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards while others are 50 state legal. View the 21-721C vehicle applications to determine the legal status for each vehicle.Installation InstructionsUser 1This Part Fits: Year Make Model Submodel 2011 Mini Cooper Base 2012-2013 Mini Cooper Coupe John Cooper Works 2012-2013 Mini Cooper Coupe S 2011-2013 Mini Cooper John Cooper Works 2011-2013 Mini Cooper John Cooper Works Clubman 2013 Mini Cooper John Cooper Works GP 2013 Mini Cooper Roadster 2012-2013 Mini Cooper Roadster John Cooper Works 2012-2013 Mini Cooper Roadster S 2011-2013 Mini Cooper S 2011-2013 Mini Cooper S Clubman 2011 Mini Cooper Countryman Base 2012 Mini Cooper Countryman S 2012 Mini Cooper Countryman S ALL4

The AEM 21-715P Performance Cold Air Intake System produces horsepower and torque gains by replacing your vehicle's restrictive factory air filter and air intake housing. This air intake system was designed, tuned and dyno-tested to fit specific Hyundai Veloster models. Air enters the system through an oversized AEM Dryflow synthetic washable air filter for outstanding air flow, filtration and performance. The air filter is relocated to the driver-side wheel well which is designed to reduce intake air temperature and increase horsepower. The intake tubing is constructed from mandrel-bent aluminum featuring a durable chrome-like finish. This air intake system was developed to accommodate the engine's factory emissions control devices including a replacement silicone breather hose. The tapered cylinder shaped AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). The air intake system is backed by AEM's Lifetime Limited Warranty. Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the 21-715P vehicle applications to determine the legal status for each vehicle.Installation InstructionsUser 1This Part Fits: Year Make Model Submodel 2012-2017 Hyundai Veloster Base 2014-2015 Hyundai Veloster RE:FLEX 2017 Hyundai Veloster Turbo 2017 Hyundai Veloster Turbo R-Spec 2017 Hyundai Veloster Value Edition

The AEM 21-715C Performance Cold Air Intake System produces horsepower and torque gains by replacing your vehicle's restrictive factory air filter and air intake housing. This air intake system was designed, tuned and dyno-tested to fit specific Hyundai Veloster models. Air enters the system through an oversized AEM Dryflow synthetic washable air filter for outstanding air flow, filtration and performance. The air filter is relocated to the driver-side wheel well which is designed to reduce intake air temperature and increase horsepower. The intake tubing is constructed from mandrel-bent aluminum featuring a durable gunmetal gray powder coated finish. This air intake system was developed to accommodate the engine's factory emissions control devices including a replacement silicone breather hose. The tapered cylinder shaped AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). The air intake system is backed by AEM's Lifetime Limited Warranty. Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the 21-715C vehicle applications to determine the legal status for each vehicle.Installation InstructionsUser 1This Part Fits: Year Make Model Submodel 2012-2017 Hyundai Veloster Base 2014-2015 Hyundai Veloster RE:FLEX 2017 Hyundai Veloster Turbo 2017 Hyundai Veloster Turbo R-Spec 2017 Hyundai Veloster Value Edition

The AEM 21-714C Performance Cold Air Intake System produces horsepower and torque gains by replacing your vehicle's restrictive factory air filter and air intake housing. This air intake system was designed, tuned and dyno-tested to fit specific Honda Civic models. Air enters the system through an oversized AEM Dryflow synthetic washable air filter for outstanding air flow, filtration and performance. The air filter is relocated to the driver-side wheel well which is designed to reduce intake air temperature and increase horsepower. The intake tubing is constructed from mandrel-bent aluminum featuring a durable gunmetal gray powder coated finish. This air intake system was developed to accommodate the engine's factory emissions control devices including the mass air flow sensor and PCV hose. The tapered cylinder shaped AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). The air intake system is backed by AEM's Lifetime Limited Warranty. Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the 21-714C vehicle applications to determine the legal status for each vehicle.Installation InstructionsUser 1This Part Fits: Year Make Model Submodel 2012 Honda Civic DX 2012-2014 Honda Civic EX 2012-2014 Honda Civic EX-L 2012 Honda Civic GX 2012-2014 Honda Civic HF 2012-2014 Honda Civic LX 2013-2014 Honda Civic Natural Gas

The AEM 21-702C Performance Cold Air Intake System produces horsepower and torque gains by replacing your vehicle's restrictive factory air filter and air intake housing. This air intake system was designed, tuned and dyno-tested to fit specific Ford Focus models. Air enters the system through an oversized AEM Dryflow synthetic washable air filter for outstanding air flow, filtration and performance. The air filter is relocated to the driver-side wheel well which is designed to reduce intake air temperature and increase horsepower. The intake tubing is constructed from mandrel-bent aluminum featuring a durable gunmetal gray powder coated finish. This air intake system was developed to accommodate the engine's factory emissions control devices including the PCV hose and mass air flow sensor (which includes an AEM extension harness). The tapered cylinder shaped AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). The air intake system is backed by AEM's Lifetime Limited Warranty. Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the 21-702C vehicle applications to determine the legal status for each vehicle.Installation InstructionsUser 1This Part Fits: Year Make Model Submodel 2012 Ford Focus S 2012 Ford Focus SE 2012 Ford Focus SEL 2012 Ford Focus Titanium

The AEM 21-699C Performance Cold Air Intake System produces horsepower and torque gains by replacing your vehicle's restrictive factory air filter and air intake housing. This air intake system was designed, tuned and dyno-tested to fit specific Mini Cooper S and S Clubman models. Air enters the system through an oversized AEM Dryflow synthetic washable air filter for outstanding air flow, filtration and performance. The air filter is protected by a heat shield and a replacement air box with a fully opened hood scoop which is designed to reduce intake air temperature and increase horsepower. The intake tubing is constructed from mandrel-bent aluminum featuring a durable gunmetal gray powder coated finish. This air intake system was developed to accommodate the engine's factory emissions control devices including the mass air flow sensor. The cylinder shaped AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). The air intake system is backed by AEM's Lifetime Limited Warranty. Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards while others are 50 state legal. View the 21-699C vehicle applications to determine the legal status for each vehicle.Installation InstructionsUser 1Technical BulletinThis Part Fits: Year Make Model Submodel 2007-2010 Mini Cooper S 2010 Mini Cooper S Clubman

The AEM 21-698C Performance Cold Air Intake System produces horsepower and torque gains by replacing your vehicle's restrictive factory air filter and air intake housing. This air intake system was designed, tuned and dyno-tested to fit specific Mitsubishi Lancer Ralliart models. Air enters the system through an oversized AEM Dryflow synthetic washable air filter for outstanding air flow, filtration and performance. The air filter is located in the original air box space and is protected by a replacement air box with a logo embossed aluminum lid which is designed to reduce intake air temperature and increase horsepower. The intake tubing is constructed from mandrel-bent aluminum featuring a durable black powder coated finish. This air intake system was developed to accommodate the engine's factory emissions control devices including the mass air flow sensor, waste gate solenoid and valve cover breather hose as well as a replacement AEM filter minder. The cylinder shaped AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). The air intake system is backed by AEM's Lifetime Limited Warranty. Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards while others are 50 state legal. View the 21-698C vehicle applications to determine the legal status for each vehicle.Installation InstructionsUser 1Technical BulletinThis Part Fits: Year Make Model Submodel 2009-2014 Mitsubishi Lancer Ralliart 2010-2011 Mitsubishi Lancer Ralliart Sportback

The AEM 21-687P Performance Cold Air Intake System produces horsepower and torque gains by replacing your vehicle's restrictive factory air filter and air intake housing. This air intake system was designed, tuned and dyno-tested to fit specific Hyundai Genesis Coupe models. Air enters the system through an oversized AEM Dryflow synthetic washable air filter for outstanding air flow, filtration and performance. The air filter is located in the original air box space which is designed to reduce intake air temperature and increase horsepower. The intake tubing is constructed from mandrel-bent aluminum featuring a durable chrome-like finish. This air intake system was developed to accommodate the engine's factory emissions control devices including the engine breather hoses. A replacement windshield washer bottle is included to adapt to the new shape of the air intake system. The tapered cylinder shaped AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards while others are 50 state legal. View the 21-687P vehicle applications to determine the legal status for each vehicle.Installation InstructionsUser 1This Part Fits: Year Make Model Submodel 2010-2012 Hyundai Genesis Coupe 2.0T 2010-2012 Hyundai Genesis Coupe 2.0T Premium 2010-2012 Hyundai Genesis Coupe 2.0T R-Spec 2010 Hyundai Genesis Coupe 2.0T Track

The AEM 21-687C Performance Cold Air Intake System produces horsepower and torque gains by replacing your vehicle's restrictive factory air filter and air intake housing. This air intake system was designed, tuned and dyno-tested to fit specific Hyundai Genesis Coupe models. Air enters the system through an oversized AEM Dryflow synthetic washable air filter for outstanding air flow, filtration and performance. The air filter is located in the original air box space which is designed to reduce intake air temperature and increase horsepower. The intake tubing is constructed from mandrel-bent aluminum featuring a durable gunmetal gray powder coated finish. This air intake system was developed to accommodate the engine's factory emissions control devices including the engine breather hoses. A replacement windshield washer bottle is included to adapt to the new shape of the air intake system. The tapered cylinder shaped AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards while others are 50 state legal. View the 21-687C vehicle applications to determine the legal status for each vehicle.Installation InstructionsUser 1This Part Fits: Year Make Model Submodel 2010-2012 Hyundai Genesis Coupe 2.0T 2010-2012 Hyundai Genesis Coupe 2.0T Premium 2010-2012 Hyundai Genesis Coupe 2.0T R-Spec 2010 Hyundai Genesis Coupe 2.0T Track

The AEM 21-682C Performance Cold Air Intake System produces horsepower and torque gains by replacing your vehicle's restrictive factory air filter and air intake housing. This air intake system was designed, tuned and dyno-tested to fit specific Chevrolet Cobalt models. Air enters the system through an oversized AEM Dryflow synthetic washable air filter for outstanding air flow, filtration and performance. The air filter is relocated to the passenger-side wheel well which is designed to reduce intake air temperature and increase horsepower. The intake tubing is constructed from mandrel-bent aluminum featuring a durable gunmetal gray powder coated finish. This air intake system was developed to accommodate the engine's factory emissions control devices including the mass air flow sensor and PCV hose. The tapered cylinder shaped AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). The air intake system is backed by AEM's Lifetime Limited Warranty. Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the 21-682C vehicle applications to determine the legal status for each vehicle.Installation InstructionsUser 1This Part Fits: Year Make Model Submodel 2008-2010 Chevrolet Cobalt SS

The AEM 21-678C Performance Cold Air Intake System produces horsepower and torque gains by replacing your vehicle's restrictive factory air filter and air intake housing. This air intake system was designed, tuned and dyno-tested to fit specific Mitsubishi Lancer Evolution, MR and GSR models. Air enters the system through an oversized AEM Dryflow synthetic washable air filter for outstanding air flow, filtration and performance. The air filter is located in the original air box space and is protected by a replacement air box which is designed to reduce intake air temperature and increase horsepower. The intake tubing is constructed from aluminum featuring a durable gunmetal gray powder coated finish. This air intake system was developed to accommodate the engine's factory emissions control devices including the mass air flow sensor, air bypass valve and engine vacuum lines as well as a replacement rubber inlet hose. The wide cone shaped AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). The air intake system is backed by AEM's Lifetime Limited Warranty. Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards while others are 50 state legal. View the 21-678C vehicle applications to determine the legal status for each vehicle.Installation InstructionsUser 1This Part Fits: Year Make Model Submodel 2016 Mitsubishi Lancer ES 2015 Mitsubishi Lancer Evolution Final Edition 2008,2010-2015 Mitsubishi Lancer Evolution GSR 2008,2010-2015 Mitsubishi Lancer Evolution MR 2010-2011 Mitsubishi Lancer Evolution MR Touring 2010 Mitsubishi Lancer Evolution SE

The AEM 21-677C Performance Cold Air Intake System produces horsepower and torque gains by replacing your vehicle's restrictive factory air filters and air intake housings. This air intake system was designed, tuned and dyno-tested to fit specific Nissan 350Z models. Air enters the system through dual oversized AEM Dryflow synthetic washable air filters for outstanding air flow, filtration and performance. The air filters are located in the original air box spaces and are protected by heat shields which are designed to reduce intake air temperature and increase horsepower. The intake tubes are constructed from mandrel-bent aluminum featuring a durable gunmetal gray powder coated finish. This air intake system was developed to accommodate the engine's factory emissions control devices including the mass air flow sensors and crankcase vent tube. The dual tapered cylinder shaped AEM Dryflow air filters are made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). The air intake system is easy to install with commonly available tools and it is backed by AEM's Lifetime Limited Warranty. Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards while others are 50 state legal. View the 21-677C vehicle applications to determine the legal status for each vehicle.Installation InstructionsThis Part Fits: Year Make Model Submodel 2007-2008 Nissan 350Z Base 2007-2008 Nissan 350Z Enthusiast 2007-2008 Nissan 350Z Grand Touring 2007-2008 Nissan 350Z Nismo 2007-2008 Nissan 350Z Touring

The AEM 21-642P Performance Cold Air Intake System produces horsepower and torque gains by replacing your vehicle's restrictive factory air filter and air intake housing. This air intake system was designed, tuned and dyno-tested to fit specific Mazda Mazdaspeed3 models. Air enters the system through an oversized AEM Dryflow synthetic washable air filter for outstanding air flow, filtration and performance. The air filter is relocated to the driver-side wheel well which is designed to reduce intake air temperature and increase horsepower. The intake tubing is constructed from mandrel-bent aluminum featuring a durable chrome-like finish. This air intake system was developed to accommodate the engine's factory emissions control devices including the mass air flow sensor and breather hoses. The tapered cylinder shaped AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). The air intake system is backed by AEM's Lifetime Limited Warranty. Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the 21-642P vehicle applications to determine the legal status for each vehicle.Installation InstructionsUser 1This Part Fits: Year Make Model Submodel 2007-2013 Mazda 3 Mazdaspeed

The AEM 21-641R Performance Cold Air Intake System produces horsepower and torque gains by replacing your vehicle's restrictive factory air filter and air intake housing. This air intake system was designed, tuned and dyno-tested to fit specific Mazda Mazdaspeed 6 models. Air enters the system through an oversized AEM Dryflow synthetic washable air filter for outstanding air flow, filtration and performance. The air filter is relocated to the driver-side wheel well which is designed to reduce intake air temperature and increase horsepower. The intake tubing is constructed from mandrel-bent aluminum featuring a durable red powder coated finish. This air intake system was developed to accommodate the engine's factory emissions control devices including the MAF and engine breather hose. The tapered cylinder shaped AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). The air intake system is backed by AEM's Lifetime Limited Warranty. Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the 21-641R vehicle applications to determine the legal status for each vehicle.Installation InstructionsThis Part Fits: Year Make Model Submodel 2006 Mazda 6 Mazdaspeed

The AEM 21-640C Performance Cold Air Intake System produces horsepower and torque gains by replacing your vehicle's restrictive factory air filter and air intake housing. This air intake system was designed, tuned and dyno-tested to fit specific Mazda MX-5 and MX-5 Miata models. Air enters the system through an oversized AEM Dryflow synthetic washable air filter for outstanding air flow, filtration and performance. The air filter is relocated to the inside of the front bumper on the driver's side which is designed to reduce intake air temperature and increase horsepower. The intake tubing is constructed from mandrel-bent aluminum featuring a durable gunmetal gray powder coated finish. This air intake system was developed to accommodate the engine's factory emissions control devices including the mass air flow sensor. The tapered cylinder shaped AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). The air intake system is backed by AEM's Lifetime Limited Warranty. Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards while others are 50 state legal. View the 21-640C vehicle applications to determine the legal status for each vehicle.Installation InstructionsThis Part Fits: Year Make Model Submodel 2006 Mazda MX-5 Miata Base 2006 Mazda MX-5 Miata Club Spec 2006-2009 Mazda MX-5 Miata Grand Touring 2006-2009 Mazda MX-5 Miata Sport 2007-2009 Mazda MX-5 Miata SV 2006-2009 Mazda MX-5 Miata Touring

The AEM 21-632C Performance Cold Air Intake System produces horsepower and torque gains by replacing your vehicle's restrictive factory air filter and air intake housing. This air intake system was designed, tuned and dyno-tested to fit specific Saturn Ion-1, Ion-2 and Ion-3 models. Air enters the system through an oversized AEM Dryflow synthetic washable air filter for outstanding air flow, filtration and performance. The air filter is relocated to the driver-side wheel well which is designed to reduce intake air temperature and increase horsepower. The intake tubing is constructed from mandrel-bent aluminum featuring a durable gunmetal gray powder coated finish. This air intake system was developed to accommodate the engine's factory emissions control devices including the IAT sensor and crank case breather hose. The tapered cylinder shaped AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). The air intake system is backed by AEM's Lifetime Limited Warranty. Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the 21-632C vehicle applications to determine the legal status for each vehicle.Installation InstructionsThis Part Fits: Year Make Model Submodel 2004 Saturn Ion 1 2004 Saturn Ion 2 2004 Saturn Ion 3

The AEM 21-547C Performance Cold Air Intake System produces horsepower and torque gains by replacing your vehicle's restrictive factory air filter and air intake housing. This air intake system was designed, tuned and dyno-tested to fit specific Nissan 350Z models. Air enters the system through an oversized AEM Dryflow synthetic washable air filter for outstanding air flow, filtration and performance. The air filter is relocated to the driver-side wheel well behind the front bumper which is designed to reduce intake air temperature and increase horsepower. The intake tubing is constructed from mandrel-bent aluminum featuring a durable gunmetal gray powder coated finish. This air intake system was developed to accommodate the engine's factory emissions control devices including the mass air flow sensor and engine breather hose. The tapered cylinder shaped AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). The air intake system is backed by AEM's Lifetime Limited Warranty. Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the 21-547C vehicle applications to determine the legal status for each vehicle.Installation InstructionsThis Part Fits: Year Make Model Submodel 2005 Nissan 350Z 35th Anniversary Edition 2003-2006 Nissan 350Z Base 2003-2006 Nissan 350Z Enthusiast 2005-2006 Nissan 350Z Grand Touring 2003-2005 Nissan 350Z Performance 2003-2006 Nissan 350Z Touring 2003-2006 Nissan 350Z Track

The AEM 21-532P Performance Cold Air Intake System produces horsepower and torque gains by replacing your vehicle's restrictive factory air filter and air intake housing. This air intake system was designed, tuned and dyno-tested to fit specific Chevrolet Cobalt models. Air enters the system through an oversized AEM Dryflow synthetic washable air filter for outstanding air flow, filtration and performance. The air filter is relocated to the driver-side wheel well which is designed to reduce intake air temperature and increase horsepower. The intake tubing is constructed from mandrel-bent aluminum featuring a durable mirror-polished powder coated finish. This air intake system was developed to accommodate the engine's factory emissions control devices including the mass air flow sensor. The tapered cylinder shaped AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). The air intake system is backed by AEM's Lifetime Limited Warranty. Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the 21-532P vehicle applications to determine the legal status for each vehicle.Installation InstructionsUser 1This Part Fits: Year Make Model Submodel 2005-2007 Chevrolet Cobalt SS

The AEM 21-513P Performance Cold Air Intake System is designed to produce horsepower and torque gains by replacing your vehicle's restrictive factory air filter and air intake housing. This air intake system is designed, tuned and dyno-tested to fit specific Acura TL models. Air enters the system through an oversized AEM Dryflow synthetic washable air filter for outstanding air flow, filtration and performance. The air filter is located in the previous air box space which is designed to reduce intake air temperature and increase horsepower. The intake tubing is constructed from mandrel-bent aluminum featuring a durable chrome-like finish. This air intake system was developed to accommodate the engine's factory emissions control devices including the replacement silicone breather hose. The cone shaped AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). The air intake system is designed for easy installation with commonly available tools and it is backed by AEM's Lifetime Limited Warranty. Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards while others are CARB exempt and 50 state legal. Check the AEM catalog or website for vehicle applications and specific CARB status for each vehicle and air intake.Installation InstructionsThis Part Fits: Year Make Model Submodel 2004-2008 Acura TL Base 2007-2008 Acura TL Type-S

The AEM 21-513C Performance Cold Air Intake System produces horsepower and torque gains by replacing your vehicle's restrictive factory air filter and air intake housing. This air intake system was designed, tuned and dyno-tested to fit specific Acura TL models. Air enters the system through an oversized AEM Dryflow synthetic washable air filter for outstanding air flow, filtration and performance. The air filter is located in the original air box space which is designed to reduce intake air temperature and increase horsepower. The intake tubing is constructed from mandrel-bent aluminum featuring a durable gunmetal gray powder coated finish. This air intake system was developed to accommodate the engine's factory emissions control devices including the replacement silicone breather hose. The cone shaped AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). The air intake system is easy to install with commonly available tools and it is backed by AEM's Lifetime Limited Warranty. Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards while others are 50 state legal. View the 21-513C vehicle applications to determine the legal status for each vehicle.Installation InstructionsThis Part Fits: Year Make Model Submodel 2004-2008 Acura TL Base 2007-2008 Acura TL Type-S

The AEM 21-513B Performance Cold Air Intake System produces horsepower and torque gains by replacing your vehicle's restrictive factory air filter and air intake housing. This air intake system was designed, tuned and dyno-tested to fit specific Acura TL models. Air enters the system through an oversized AEM Dryflow synthetic washable air filter for outstanding air flow, filtration and performance. The air filter is located in the original air box space which is designed to reduce intake air temperature and increase horsepower. The intake tubing is constructed from mandrel-bent aluminum featuring a durable blue powder coated finish. This air intake system was developed to accommodate the engine's factory emissions control devices including the replacement silicone breather hose. The cone shaped AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). The air intake system is backed by AEM's Lifetime Limited Warranty. Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards while others are 50 state legal. View the 21-513B vehicle applications to determine the legal status for each vehicle.Installation InstructionsThis Part Fits: Year Make Model Submodel 2004-2008 Acura TL Base 2007-2008 Acura TL Type-S

The AEM 21-508R Performance Cold Air Intake System produces horsepower and torque gains by replacing your vehicle's restrictive factory air filter and air intake housing. This air intake system was designed, tuned and dyno-tested to fit specific Honda Civic SI models. Air enters the system through an oversized AEM Dryflow synthetic washable air filter for outstanding air flow, filtration and performance. The air filter is relocated to the driver-side wheel well which is designed to reduce intake air temperature and increase horsepower. The intake tubing is constructed from mandrel-bent aluminum featuring a durable red powder coated finish. This air intake system was developed to accommodate the engine's factory emissions control devices including the inlet air temperature sensor and a replacement breather hose. The tapered cylinder shaped AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). The air intake system is backed by AEM's Lifetime Limited Warranty. Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the 21-508R vehicle applications to determine the legal status for each vehicle.Installation InstructionsThis Part Fits: Year Make Model Submodel 2002-2005 Honda Civic Si

AEM's 21-5011 is ideal for engine swaps when a custom intake is required. It comes with an AEM Dryflow Air Filter, three 4 inch diameter aluminum tube bends, one straight 36 inch long, 4 inch diameter tube, seven couplers, a weld-on mass air flow sensor pad, two brackets and hardware needed to custom build an air intake.Installation Instructions

The AEM 21-5008C Performance Hybrid Cold Air Intake System produces horsepower and torque gains by replacing your vehicle's existing restrictive air filter and air intake assembly. This air intake system was designed, tuned and dyno-tested to fit specific Honda Civic models with a H22A engine swap. Air enters the system through an oversized AEM Dryflow synthetic washable air filter for outstanding air flow, filtration and performance. The air filter is installed in the passenger-side wheel well which is designed to reduce intake air temperature and increase horsepower. The intake tubing is constructed from mandrel-bent aluminum featuring a durable gunmetal gray powder coated finish. This air intake system was developed to accommodate the engine's emissions control devices including a replacement engine breather hose. The tapered cylinder shaped AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). The air intake system is backed by AEM's Lifetime Limited Warranty. Since the hybrid air intake is for a vehicle with an engine swap, this air intake cannot be sold in California. It is not legal for use in California or other states adopting California emission standards.Installation InstructionsThis Part Fits: Year Make Model Submodel 1996-2000 Honda Civic CX 1996-2000 Honda Civic DX 1996-2000 Honda Civic EX 1998-2000 Honda Civic GX 1996-2000 Honda Civic HX 1996-2000 Honda Civic LX 1999-2000 Honda Civic Si 1999 Honda Civic Value Package

The AEM 21-491C Performance Cold Air Intake System produces horsepower and torque gains by replacing your vehicle's restrictive factory air filter and air intake housing. This air intake system was designed, tuned and dyno-tested to fit specific Mazda 6 models. Air enters the system through an oversized AEM Dryflow synthetic washable air filter for outstanding air flow, filtration and performance. The air filter is relocated to the driver-side wheel well which is designed to reduce intake air temperature and increase horsepower. The intake tubing is constructed from mandrel-bent aluminum featuring a durable gunmetal gray powder coated finish. This air intake system was developed to accommodate the engine's factory emissions control devices including the mass air flow sensor and crankcase breather hose. The tapered cylinder shaped AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). The air intake system is backed by AEM's Lifetime Limited Warranty. Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the 21-491C vehicle applications to determine the legal status for each vehicle.Installation InstructionsThis Part Fits: Year Make Model Submodel 2005-2008 Mazda 6 i

The AEM 21-485R Performance Cold Air Intake System produces horsepower and torque gains by replacing your vehicle's restrictive factory air filter and air intake housing. This air intake system was designed, tuned and dyno-tested to fit specific Mazda RX-8 models. Air enters the system through an oversized AEM Dryflow synthetic washable air filter for outstanding air flow, filtration and performance. The air filter is located above the passenger side wheel well which is designed to reduce intake air temperature and increase horsepower. The intake tubing is constructed from mandrel-bent aluminum featuring a durable red powder coated finish with a series of gradually expanding inlet pipes. This air intake system was developed to accommodate the engine's factory emissions control devices including the mass air flow sensor and breather hoses. The tapered cone shaped AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). The air intake system is backed by AEM's Lifetime Limited Warranty. Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards while others are 50 state legal. View the 21-485R vehicle applications to determine the legal status for each vehicle.Installation InstructionsUser 1This Part Fits: Year Make Model Submodel 2008 Mazda RX-8 40th Anniversary Edition 2004-2007 Mazda RX-8 Base 2008-2011 Mazda RX-8 Grand Touring 2009-2011 Mazda RX-8 R3 2005 Mazda RX-8 Shinka 2008-2011 Mazda RX-8 Sport 2008-2009 Mazda RX-8 Touring

The AEM 21-485P Performance Cold Air Intake System produces horsepower and torque gains by replacing your vehicle's restrictive factory air filter and air intake housing. This air intake system was designed, tuned and dyno-tested to fit specific Mazda RX-8 models. Air enters the system through an oversized AEM Dryflow synthetic washable air filter for outstanding air flow, filtration and performance. The air filter is located above the passenger side wheel well which is designed to reduce intake air temperature and increase horsepower. The intake tubing is constructed from mandrel-bent aluminum featuring a durable chrome-like finish with a series of gradually expanding inlet pipes. This air intake system was developed to accommodate the engine's factory emissions control devices including the mass air flow sensor and breather hoses. The tapered cone shaped AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). The air intake system is backed by AEM's Lifetime Limited Warranty. Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards while others are 50 state legal. View the 21-485P vehicle applications to determine the legal status for each vehicle.Installation InstructionsUser 1This Part Fits: Year Make Model Submodel 2008 Mazda RX-8 40th Anniversary Edition 2004-2007 Mazda RX-8 Base 2008-2011 Mazda RX-8 Grand Touring 2009-2011 Mazda RX-8 R3 2005 Mazda RX-8 Shinka 2008-2011 Mazda RX-8 Sport 2008-2009 Mazda RX-8 Touring