This Performance Air Intake System allows your engine to breath more air compared to the restrictive factory air intake housing. It is designed, tuned, and dyno-tested to produce more horsepower and torque. The cone-shaped AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). A custom shaped heat shield with edge trim lining is included to keep engine bay heat from the air intake. The air intake tube is constructed from mandrel-bent aluminum featuring a durable gunmetal gray powder coated finish. This air intake system is backed by AEM's Lifetime Limited Warranty. Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the vehicle applications to determine the legal status for each vehicle.Technical DrawingInstallation InstructionsThis Part Fits: Year Make Model Submodel 2017-2018 Kia Forte EX 2017-2018 Kia Forte LX 2017-2018 Kia Forte S 2017-2018 Kia Forte5 EX 2017-2018 Kia Forte5 LX

The AEM 21-8504DP Brute Force Air Intake System produces horsepower and torque gains by replacing the vehicle's restrictive factory air filter and air intake housing. This air intake system was designed, tuned and dyno-tested to fit specific Nissan Frontier, Xterra and Pathfinder models. Air enters the system through an extra-large AEM Dryflow synthetic washable air filter for outstanding air flow, filtration and performance. The air filter is located in the original air box space and is protected by a heat shield which is designed to reduce intake air temperature and increase horsepower. The intake tubing is constructed from mandrel-bent aluminum featuring a durable chrome-like finish. This air intake system was developed to accommodate the engine's factory emissions control devices including the mass air flow sensor and crank case vent hose. The tapered cylinder shaped AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). The air intake system is easy to install with commonly available tools and it is backed by AEM's Lifetime Limited Warranty. Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards while others are 50 state legal. View the 21-8504DP vehicle applications to determine the legal status for each vehicle.Installation InstructionsUser 1This Part Fits: Year Make Model Submodel 2013-2015 Nissan Frontier Desert Runner 2005-2010 Nissan Frontier LE 2005-2008 Nissan Frontier Nismo Off-Road 2009-2015 Nissan Frontier PRO-4X 2011-2015 Nissan Frontier S 2005-2010 Nissan Frontier SE 2011-2015 Nissan Frontier SL 2011-2015 Nissan Frontier SV 2005-2012 Nissan Pathfinder LE 2006-2012 Nissan Pathfinder S 2005-2010 Nissan Pathfinder SE 2005-2009 Nissan Pathfinder SE Off-Road 2011-2012 Nissan Pathfinder Silver Edition 2011-2012 Nissan Pathfinder SV 2005 Nissan Pathfinder XE 2005-2010 Nissan Xterra Off-Road 2011-2014 Nissan Xterra PRO-4X 2005-2014 Nissan Xterra S 2005-2010 Nissan Xterra SE 2006-2014 Nissan Xterra X

The AEM 21-8504DC Brute Force Air Intake System produces horsepower and torque gains by replacing the vehicle's restrictive factory air filter and air intake housing. This air intake system was designed, tuned and dyno-tested to fit specific Nissan Frontier, Xterra and Pathfinder models. Air enters the system through an extra large AEM Dryflow synthetic washable air filter for outstanding air flow, filtration and performance. The air filter is located in the original air box space and is protected by a heat shield which is designed to reduce intake air temperature and increase horsepower. The intake tubing is constructed from mandrel-bent aluminum featuring a durable gunmetal gray powder coated finish. This air intake system was developed to accommodate the engine's factory emissions control devices including the mass air flow sensor and crank case vent hose. The tapered cylinder shaped AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). The air intake system is easy to install with commonly available tools and it is backed by AEM's Lifetime Limited Warranty. Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards while others are 50 state legal. View the 21-8504DC vehicle applications to determine the legal status for each vehicle.Installation InstructionsUser 1This Part Fits: Year Make Model Submodel 2013-2015 Nissan Frontier Desert Runner 2005-2010 Nissan Frontier LE 2005-2008 Nissan Frontier Nismo Off-Road 2009-2015 Nissan Frontier PRO-4X 2011-2015 Nissan Frontier S 2005-2010 Nissan Frontier SE 2011-2015 Nissan Frontier SL 2011-2015 Nissan Frontier SV 2005-2012 Nissan Pathfinder LE 2006-2012 Nissan Pathfinder S 2005-2010 Nissan Pathfinder SE 2005-2009 Nissan Pathfinder SE Off-Road 2011-2012 Nissan Pathfinder Silver Edition 2011-2012 Nissan Pathfinder SV 2005 Nissan Pathfinder XE 2005-2010 Nissan Xterra Off-Road 2011-2014 Nissan Xterra PRO-4X 2005-2014 Nissan Xterra S 2005-2010 Nissan Xterra SE 2006-2014 Nissan Xterra X

The AEM 21-8502DC Brute Force Air Intake System produces horsepower and torque gains for high displacement engines by replacing the vehicle's restrictive factory air filter and air intake housing. This air intake system was designed, tuned and dyno-tested to fit specific Nissan Titan, Armada and Pathfinder as well as Infiniti QX56 models. Air enters the system through an oversized AEM Dryflow synthetic washable air filter for outstanding air flow, filtration and performance. The air filter is located in the original air box space and is protected by a heat shield which is designed to reduce intake air temperature and increase horsepower. The intake tubing is constructed from mandrel-bent aluminum featuring a durable gunmetal gray powder coated finish. This air intake system was developed to accommodate the engine's factory emissions control devices including the mass air flow sensor and two replacement silicone breather hoses. The cylinder shaped AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). The air intake system is backed by AEM's Lifetime Limited Warranty. Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards while others are 50 state legal. View the 21-8502DC vehicle applications to determine the legal status for each vehicle.Installation InstructionsUser 1This Part Fits: Year Make Model Submodel 2004-2010 INFINITI QX56 Base 2005-2009 Nissan Armada LE 2010-2014 Nissan Armada Platinum 2005-2010 Nissan Armada SE 2005-2006 Nissan Armada SE Off-Road 2011-2014 Nissan Armada SL 2011-2014 Nissan Armada SV 2010 Nissan Armada Titanium 2004 Nissan Pathfinder Armada LE 2004 Nissan Pathfinder Armada SE 2004-2010 Nissan TITAN LE 2008-2015 Nissan TITAN PRO-4X 2011-2015 Nissan TITAN S 2004-2010 Nissan TITAN SE 2011-2015 Nissan TITAN SL 2011-2015 Nissan TITAN SV 2004-2010 Nissan TITAN XE

This Performance Air Intake System allows your engine to breathe more air compared to the restrictive factory air intake housing. It is designed, tuned and dyno-tested to produce more horsepower and torque. This system replaces both the left and right side intakes. The cone shaped AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). The durable powder coated heatshields utilize the factory air ducting and the intake tubes are made from roto-molded plastic. This Air Intake System is backed by AEM's Lifetime Limited Warranty. Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the vehicle applications to determine the legal status for each vehicle.Installation InstructionsUser 1Installation InstructionsThis Part Fits: Year Make Model Submodel 2024 Genesis G70 Base 2024 Genesis G70 Sport Advanced 2024 Genesis G70 Sport Prestige 2018-2021 Kia Stinger GT 2018-2022 Kia Stinger GT1 2018-2023 Kia Stinger GT2 2019 Kia Stinger GTS 2023 Kia Stinger Tribute Edition

This Performance Air Intake System allows your engine to breathe more air compared to the restrictive factory air intake housing. It is designed, tuned and dyno-tested to produce more horsepower and torque. Air enters the system through an oversized AEM Dryflow synthetic washable air filter for outstanding air flow, filtration and performance. The air intake tube is constructed from mandrel-bent aluminum featuring a durable gunmetal gray powder coated finish. A custom shaped heat shield with lid is included. The tapered cylinder shaped AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). This Air Intake System is backed by AEM's Lifetime Limited Warranty. Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the vehicle applications to determine the legal status for each vehicle.User 1Installation InstructionsInstallation InstructionsThis Part Fits: Year Make Model Submodel 2016-2017 Hyundai Sonata Base 2015 Hyundai Sonata Hybrid 2015 Hyundai Sonata Hybrid Limited 2015-2019 Hyundai Sonata Limited 2015-2019 Hyundai Sonata SE 2018-2019 Hyundai Sonata SEL 2015-2019 Hyundai Sonata Sport 2015-2018 Kia Optima EX 2016 Kia Optima Hybrid 2015-2016 Kia Optima Hybrid EX 2015 Kia Optima Hybrid LX 2015-2020 Kia Optima LX 2018-2020 Kia Optima S 2020 Kia Optima Special Edition 2015 Kia Optima SX

This Performance Air Intake System allows your engine to breath more air compared to the restrictive factory air intake housing. It is designed, tuned, and dyno-tested to produce more horsepower and torque. The cone-shaped AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). A custom shaped heat shield with edge trim lining is included to keep engine bay heat from the air intake. The air intake tube is constructed from mandrel-bent aluminum featuring a durable gunmetal gray powder coated finish. This air intake system is backed by AEM's Lifetime Limited Warranty. Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the vehicle applications to determine the legal status for each vehicle.User 1Installation InstructionsInstallation InstructionsThis Part Fits: Year Make Model Submodel 2018-2024 Subaru Crosstrek Base 2019-2023 Subaru Crosstrek Hybrid 2018-2020 Subaru Crosstrek Limited 2018-2024 Subaru Crosstrek Premium 2017-2024 Subaru Impreza Base 2017-2023 Subaru Impreza Limited 2017-2023 Subaru Impreza Premium 2017-2024 Subaru Impreza Sport

This Performance Air Intake System allows your engine to breathe more air compared to the restrictive factory air intake housing. It is designed, tuned and dyno-tested to produce more horsepower and torque. Air enters the system from the factory fresh air inlets. through replacement air duct and into a roto-molded, aerodynamic AEM air box containing an oversized AEM Dryflow synthetic washable air filter for outstanding air flow, filtration and performance.The cone shaped AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). This Air Intake System is backed by AEM's Lifetime Limited Warranty. Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the vehicle applications to determine the legal status for each vehicle.Installation InstructionsUser 1This Part Fits: Year Make Model Submodel 2007-2013 BMW 328i Base 2009-2010,2012-2013 BMW 328i xDrive Base 2007-2008 BMW 328xi Base

AEM Air Intake Systems are designed to produce massive horsepower and torque gains as well as better engine sound when used as a replacement for the factory airbox and air filter. AEM intake systems are designed, tuned, and dyno-tested to fit specific cars and trucks. These air intakes usually include an oversized AEM Dryflow synthetic washable air filter for outstanding air flow, filtration, and performance while allowing easy oil-free cleaning. Most AEM intake systems use mandrel-bent aluminum intake tubes, powder coated heat shields, and high quality hardware designed to reduce restriction and reduce intake temperature. The design and components of each intake system vary so consult the installation instructions for more information on the contents of each part number. AEM manufactures a variety of intake kit styles including short ram intakes, cold air intakes, dual-chamber intakes, Brute Force intakes for trucks and SUV's, and Brute Force HD intakes for diesel applications.Installation InstructionsThis Part Fits: Year Make Model Submodel 2001-2003 Toyota Sequoia Limited 2001-2003 Toyota Sequoia SR5 2000-2003 Toyota Tundra Limited 2000-2003 Toyota Tundra SR5

This Performance Air Intake System allows your engine to breath more air compared to the restrictive factory air intake housing. It is designed, tuned, and dyno-tested to produce more horsepower and torque. The cone-shaped AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). A custom shaped heat shield with edge trim lining is included to keep engine bay heat from the air intake. The air intake tube is constructed from mandrel-bent aluminum featuring a durable gunmetal gray powder coated finish. This air intake system is backed by AEM's Lifetime Limited Warranty. Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the vehicle applications to determine the legal status for each vehicle.Installation InstructionsTechnical DrawingThis Part Fits: Year Make Model Submodel 2015,2017-2019 BMW X1 sDrive28i 2015-2019 BMW X1 xDrive28i 2019 BMW X2 M35i 2018-2019 BMW X2 sDrive28i 2018-2019 BMW X2 xDrive28i 2014-2020 Mini Cooper Base 2016-2020 Mini Cooper John Cooper Works 2014-2020 Mini Cooper S 2017-2019 Mini Cooper Clubman ALL4 2016-2019 Mini Cooper Clubman Base 2019 Mini Cooper Clubman John Cooper Works ALL4 2019 Mini Cooper Clubman S 2019 Mini Cooper Clubman S ALL4 2019-2020 Mini Cooper Countryman ALL4 2019-2020 Mini Cooper Countryman Base 2018-2019 Mini Cooper Countryman John Cooper Works ALL4 2019-2020 Mini Cooper Countryman S 2019-2020 Mini Cooper Countryman S ALL4 2019-2020 Mini Cooper Countryman S E ALL4

The AEM 21-836WR Performance Cold Air Intake System produces horsepower and torque gains by replacing your vehicle's restrictive factory air filter and air intake housing. This air intake system was designed, tuned and dyno-tested to fit specific Subaru WRX STI models. Air enters the system through an oversized AEM Dryflow synthetic washable air filter for outstanding air flow, filtration and performance. The air filter is located in the original air box space and is protected by a heat shield which is designed to reduce intake air temperature and increase horsepower. The intake tubing is constructed from mandrel-bent aluminum featuring a durable textured red powder coated finish. This air intake system was developed to accommodate the engine's factory emissions control devices including the mass air flow sensor. The tapered cylinder shaped AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). The air intake system is easy to install with commonly available tools and it is backed by AEM's Lifetime Limited Warranty. Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards while others are 50 state legal. View the 21-836WR vehicle applications to determine the legal status for each vehicle.Technical DrawingInstallation InstructionsInstallation InstructionsThis Part Fits: Year Make Model Submodel 2018 Subaru WRX STI Base 2018 Subaru WRX STI Limited 2018 Subaru WRX STI Type RA

AEM cold air intake systems are designed to increase horsepower and torque. The system includes an oversized AEM DRYFLOW synthetic washable air filter, engineered to provide outstanding airflow, filtration, and performance, and also features a mandrel-bent aluminum intake tube and high quality hardware. The oversized, conical filter design allows you to go up to 100,000 miles between filter services under normal highway driving conditions. A custom heat shield helps protect intake air from the high temperature of your engine bay, and the factory fresh air duct attaches to the heat shield. The entire system can typically be installed in less than 90 minutes. Some intakes are not legal for sale or use on any pollution controlled motor vehicle in California. See the product specifications for CARB status on each part for a specific vehicle.Installation InstructionsUser 1This Part Fits: Year Make Model Submodel 2018 Subaru WRX STI Base 2018 Subaru WRX STI Limited 2018 Subaru WRX STI Type RA

This Performance Air Intake System allows your engine to breath more air compared to the restrictive factory air intake housing. It is designed, tuned, and dyno-tested to produce more horsepower and torque. The cone-shaped AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). A custom shaped heat shield with edge trim lining is included to keep engine bay heat from the air intake. The air intake tube is constructed from mandrel-bent aluminum featuring a durable gunmetal gray powder coated finish. This air intake system is backed by AEM's Lifetime Limited Warranty. Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the vehicle applications to determine the legal status for each vehicle.Installation InstructionsUser 1This Part Fits: Year Make Model Submodel 2006-2013 Lexus IS250 Base 2010-2013 Lexus IS250 C 2006-2013 Lexus IS350 Base 2010-2013 Lexus IS350 C

This Performance Air Intake System allows your engine to breath more air compared to the restrictive factory air intake housing. It is designed, tuned, and dyno-tested to produce more horsepower and torque. The cone-shaped AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). A custom shaped heat shield with edge trim lining is included to keep engine bay heat from the air intake. The air intake tube is constructed from mandrel-bent aluminum featuring a durable gunmetal gray powder coated finish. This air intake system is backed by AEM's Lifetime Limited Warranty. Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the vehicle applications to determine the legal status for each vehicle.Installation InstructionsTechnical DrawingInstallation InstructionsThis Part Fits: Year Make Model Submodel 2017-2020 Honda Civic Type R

The AEM 21-8315DC Brute Force Air Intake System produces horsepower and torque gains by replacing the vehicle's restrictive factory air filter and air intake housing. This air intake system was designed, tuned and dyno-tested to fit specific Jeep Cherokee models. Air enters the system through an extra-large AEM Dryflow synthetic washable air filter for outstanding air flow, filtration and performance. The air filter is located in the original air box space and is protected by a heat shield which is designed to reduce intake air temperature and increase horsepower. The intake tubing is constructed from mandrel-bent aluminum featuring a durable gunmetal gray powder coated finish. This air intake system was developed to accommodate the engine's factory emissions control devices including the crankcase breather hose. The tapered cylinder shaped AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). The air intake system is easy to install with commonly available tools and it is backed by AEM's Lifetime Limited Warranty. Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards while others are 50 state legal. View the 21-8315DC vehicle applications to determine the legal status for each vehicle.Installation InstructionsThis Part Fits: Year Make Model Submodel 1991-1993 Jeep Cherokee Base 1991-1992 Jeep Cherokee Briarwood 1996,1998-2001 Jeep Cherokee Classic 1993-1997 Jeep Cherokee Country 1991-1992 Jeep Cherokee Laredo 1991-1992,1998-2001 Jeep Cherokee Limited 1994-2001 Jeep Cherokee SE 1991-2001 Jeep Cherokee Sport

The AEM 21-8310DC Brute Force Air Intake System produces horsepower and torque gains by replacing the vehicle's restrictive factory air filter and air intake housing. This air intake system was designed, tuned and dyno-tested to fit specific Jeep Commander models. Air enters the system through an extra-large AEM Dryflow synthetic washable air filter for outstanding air flow, filtration and performance. The air filter is located in the original air box space and is protected by a heat shield which is designed to reduce intake air temperature and increase horsepower. The intake tubing is constructed from mandrel-bent aluminum featuring a durable gunmetal gray powder coated finish. This air intake system was developed to accommodate the engine's factory emissions control devices including the IAT sensor and crank case breather hose. The tapered cylinder shaped AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). The air intake system is easy to install with commonly available tools and it is backed by AEM's Lifetime Limited Warranty. Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the 21-8310DC vehicle applications to determine the legal status for each vehicle.Installation InstructionsThis Part Fits: Year Make Model Submodel 2006 Jeep Commander 65th Anniversary Edition 2006 Jeep Commander Base 2006 Jeep Commander Limited

The AEM 21-8308DC Brute Force Air Intake System produces horsepower and torque gains by replacing the vehicle's restrictive factory air filter and air intake housing. This air intake system was designed, tuned and dyno-tested to fit specific Jeep Wrangler models. Air enters the system through an extra-large AEM Dryflow synthetic washable air filter for outstanding air flow, filtration and performance. The air filter is located in the original air box space and is protected by a heat shield which is designed to reduce intake air temperature and increase horsepower. The intake tubing is constructed from mandrel-bent aluminum featuring a durable gunmetal gray powder coated finish. This air intake system was developed to accommodate the engine's factory emissions control devices including the engine breather hose. The tapered cylinder shaped AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). The air intake system is easy to install with commonly available tools and it is backed by AEM's Lifetime Limited Warranty. Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the 21-8308DC vehicle applications to determine the legal status for each vehicle.Installation InstructionsThis Part Fits: Year Make Model Submodel 2004-2005 Jeep Wrangler SE

This Performance Air Intake System allows your engine to breath more air compared to the restrictive factory air intake housing. It is designed, tuned, and dyno-tested to produce more horsepower and torque. The cone-shaped AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). A custom shaped heat shield with edge trim lining is included to keep engine bay heat from the air intake. The air intake tube is constructed from mandrel-bent aluminum featuring a durable gunmetal gray powder coated finish. This air intake system is backed by AEM's Lifetime Limited Warranty. Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the vehicle applications to determine the legal status for each vehicle.Installation InstructionsTechnical DrawingThis Part Fits: Year Make Model Submodel 2019-2024 Lexus ES350 Base 2019-2022 Lexus ES350 F Sport 2023-2024 Lexus ES350 F Sport Design 2023-2024 Lexus ES350 F Sport Handling 2019-2024 Lexus ES350 Luxury 2019-2024 Lexus ES350 Ultra Luxury 2019-2022 Toyota Avalon Limited 2019-2022 Toyota Avalon Touring 2020-2021 Toyota Avalon TRD 2019-2022 Toyota Avalon XLE 2019-2020 Toyota Avalon XSE 2021 Toyota Avalon XSE Nightshade 2020-2024 Toyota Camry TRD 2018-2024 Toyota Camry XLE 2018-2024 Toyota Camry XSE

The AEM 21-824 Performance Air Intake System allows your engine to breath more air compared to the restrictive factory air intake housing. It is designed, tuned, and dyno-tested for some Lexus GS200T models to produce more horsepower and torque. The cone-shaped AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). A custom shaped heat shield with edge trim lining is included to keep engine bay heat from the air intake. The air intake tube is constructed from mandrel-bent aluminum featuring a durable gunmetal gray powder coated finish and has mounts for the factory MAF sensor and PCV hose. This air intake system is backed by AEM's Lifetime Limited Warranty. Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the 21-824 vehicle applications to determine the legal status for each vehicle.Brochure - A general brochure describing a brand, company, product line. If brochure in question is for a specific product, use code PDB.Installation InstructionsThis Part Fits: Year Make Model Submodel 2016 Lexus GS200t Base 2016 Lexus GS200t F Sport

The AEM 21-823DS is a twin intake system designed for some Infinity Q70 models. The factory layout of this vehicle has individual throttle bodies for each bank of cylinders so each side has its own air intake system. This AEM air intake system replaces both the left and right factory air box, tube, and filter. This system includes the heat shield, intake tube, and AEM dryflow air filter on both left and right sides. The cone shaped AEM Dryflow air filters are made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). Both factory MAF sensors mount directly on the intake tube. The heatshield also has a rubberized edge trim to better isolate air from engine bay heat. The air intake system is backed by AEM's Lifetime Limited Warranty. Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the 21-823DS vehicle applications to determine the legal status for each vehicle.Technical DrawingInstallation InstructionsThis Part Fits: Year Make Model Submodel 2011-2013 INFINITI M37 Base 2011-2013 INFINITI M37 X 2014-2017 INFINITI Q70 3.7

The AEM-21-822C Performance Cold Air Intake System produces horsepower and torque gains by replacing your vehicle's restrictive factory air filter and air intake housing. This air intake system was designed, tuned and dyno-tested to fit specific Honda Accord models. Air enters the system through an oversized AEM Dryflow synthetic washable air filter for outstanding air flow, filtration and performance. The air filter is relocated to the driver-side wheel well which is designed to reduce intake air temperature and increase horsepower. The intake tubing is constructed from mandrel-bent aluminum featuring a durable gunmetal gray powder coated finish. This air intake system was developed to accommodate the engine's factory emissions control devices including the mass air flow sensor and crankcase vent tube. The tapered cylinder shaped AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). The air intake system is backed by AEM's Lifetime Limited Warranty. Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the 21-822C vehicle applications to determine the legal status for each vehicle.Installation InstructionsUser 1This Part Fits: Year Make Model Submodel 2008-2012 Honda Accord EX 2008-2012 Honda Accord EX-L 2008-2012 Honda Accord LX 2008-2012 Honda Accord LX-P 2008-2012 Honda Accord LX-S 2011-2012 Honda Accord SE

The AEM 21-8228DP Brute Force Air Intake System produces horsepower and torque gains by replacing the vehicle's restrictive factory air filter and air intake housing. This air intake system was designed, tuned and dyno-tested to fit specific Dodge Ram 1500 Pickup and RAM 1500 models. Air enters the system through an extra-large AEM Dryflow synthetic washable air filter for outstanding air flow, filtration and performance. The air filter is located in the original air box space and is protected by a heat shield which is designed to reduce intake air temperature and increase horsepower. The intake tubing is constructed from mandrel-bent aluminum featuring a durable chrome-like finish. This air intake system was developed to accommodate the engine's factory emissions control devices including the IAT sensor and crank case breather hose. The oval cylinder shaped AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). The air intake system is easy to install with commonly available tools and it is backed by AEM's Lifetime Limited Warranty. Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the 21-8228DP vehicle applications to determine the legal status for each vehicle.Installation InstructionsUser 1This Part Fits: Year Make Model Submodel 2013-2014 Ram 1500 Big Horn 2012-2014 Ram 1500 Express 2014 Ram 1500 HFE 2013-2014 Ram 1500 Laramie 2014 Ram 1500 Laramie Limited 2013-2014 Ram 1500 Laramie Longhorn 2014 Ram 1500 Lone Star 2013-2014 Ram 1500 Outdoorsman 2013 Ram 1500 R/T 2013-2014 Ram 1500 SLT 2014 Ram 1500 Special Service 2013-2014 Ram 1500 Sport 2013-2014 Ram 1500 Tradesman

The AEM 21-8223DP Brute Force Air Intake System produces horsepower and torque gains by replacing the vehicle's restrictive factory air filter and air intake housing. This air intake system was designed, tuned and dyno-tested to fit specific Dodge Charger and Challenger models. Air enters the system through an extra-large AEM Dryflow synthetic washable air filter for outstanding air flow, filtration and performance. The air filter is relocated above the driver's side wheel well which is designed to reduce intake air temperature and increase horsepower. The intake tubing is constructed from mandrel-bent aluminum featuring a durable chrome-like finish. This air intake system was developed to accommodate the engine's factory emissions control devices including the IAT sensor and crank case breather hose. The cylinder shaped AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). The air intake system is backed by AEM's Lifetime Limited Warranty. Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards while others are 50 state legal. View the 21-8223DP vehicle applications to determine the legal status for each vehicle.Installation InstructionsUser 1This Part Fits: Year Make Model Submodel 2009-2017 Dodge Challenger R/T 2012 Dodge Challenger R/T Classic 2015-2016 Dodge Challenger R/T Plus 2016 Dodge Challenger R/T Plus Shaker 2016 Dodge Challenger R/T Shaker 2008-2010 Dodge Challenger SRT8 2017 Dodge Challenger T/A 2017 Dodge Charger Daytona 2009-2017 Dodge Charger Pursuit 2009-2017 Dodge Charger R/T 2015-2016 Dodge Charger R/T Road & Track 2009-2014 Dodge Charger SE 2009-2010 Dodge Charger SRT8

The AEM 21-8223DC Brute Force Air Intake System produces horsepower and torque gains for high displacement engines by replacing the vehicle's restrictive factory air filter and air intake housing. This air intake system was designed, tuned and dyno-tested to fit specific Dodge Charger and Challenger models. Air enters the system through an oversized AEM Dryflow synthetic washable air filter for outstanding air flow, filtration and performance. The air filter is located above the driver's side wheel well which is designed to reduce intake air temperature and increase horsepower. The intake tubing is constructed from mandrel-bent aluminum featuring a durable gunmetal gray powder coated finish. This air intake system was developed to accommodate the engine's factory emissions control devices including the IAT sensor and crank case breather hose. The cylinder shaped AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). The air intake system is backed by AEM's Lifetime Limited Warranty. Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards while others are 50 state legal. View the 21-8223DC vehicle applications to determine the legal status for each vehicle.Installation InstructionsUser 1This Part Fits: Year Make Model Submodel 2009-2017 Dodge Challenger R/T 2012 Dodge Challenger R/T Classic 2015-2016 Dodge Challenger R/T Plus 2016 Dodge Challenger R/T Plus Shaker 2016 Dodge Challenger R/T Shaker 2008-2010 Dodge Challenger SRT8 2017 Dodge Challenger T/A 2017 Dodge Charger Daytona 2009-2017 Dodge Charger Pursuit 2009-2017 Dodge Charger R/T 2015-2016 Dodge Charger R/T Road & Track 2009-2014 Dodge Charger SE 2009-2010 Dodge Charger SRT8

The 21-821DS Performance Cold Air Intake System produces horsepower and torque gains by replacing the restrictive air filter and air intake housing. This air intake system was designed, tuned and dyno-tested to fit specific Nissan 370Z models. This system replaces both the left and right side intakes. The AEM Dryflow synthetic washable air filter does not require oiling and can be used up to 100,000 miles before servicing is needed (depending on driving conditions). The heatshield is a two piece design and also utilizes the factory air ducting. The intake tube is constructed from mandrel bent aluminum and has a durable gray powder coat finish. This air intake system was developed to accommodate the mass air flow sensor and PCV hose. The air intake system is backed by AEM's Lifetime Limited Warranty. Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the 21-821DS vehicle applications to determine the legal status for each vehicle.Installation InstructionsUser 1This Part Fits: Year Make Model Submodel 2010 Nissan 370Z 40th Anniversary Edition 2009-2020 Nissan 370Z Base 2018-2019 Nissan 370Z Heritage Edition 2009-2017,2019-2020 Nissan 370Z Nismo 2015-2018 Nissan 370Z Nismo Tech 2015-2020 Nissan 370Z Sport 2015-2018 Nissan 370Z Sport Tech 2019-2020 Nissan 370Z Sport Touring 2009-2019 Nissan 370Z Touring 2015-2018 Nissan 370Z Touring Sport

The AEM 21-8217DP Performance Cold Air Intake System produces horsepower and torque gains by replacing your vehicle's restrictive factory air filter and air intake housing. This air intake system was designed, tuned and dyno-tested to fit specific Dodge Caliber, Jeep Patriot and Compass models. Air enters the system through an oversized AEM Dryflow synthetic washable air filter for outstanding air flow, filtration and performance. The air filter is located in the original air box space which is designed to reduce intake air temperature and increase horsepower. The intake tubing is constructed from mandrel-bent aluminum featuring a durable chrome-like finish. This air intake system was developed to accommodate the engine's factory emissions control devices including the IAT sensor and crank case breather hose. The tapered cylinder shaped AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the 21-8217DP vehicle applications to determine the legal status for each vehicle.Installation InstructionsThis Part Fits: Year Make Model Submodel 2010 Dodge Caliber Express 2010 Dodge Caliber Heat 2010 Dodge Caliber Mainstreet 2007-2010 Dodge Caliber R/T 2010 Dodge Caliber Rush 2007-2010 Dodge Caliber SE 2008-2009 Dodge Caliber SRT-4 2007-2010 Dodge Caliber SXT 2010 Dodge Caliber Uptown 2007-2010 Jeep Compass Limited 2007-2010 Jeep Compass Sport 2007-2010 Jeep Patriot Limited 2007-2010 Jeep Patriot Sport

The AEM 21-8217DC Performance Cold Air Intake System produces horsepower and torque gains by replacing your vehicle's restrictive factory air filter and air intake housing. This air intake system was designed, tuned and dyno-tested to fit specific Dodge Caliber, Jeep Patriot and Compass models. Air enters the system through an oversized AEM Dryflow synthetic washable air filter for outstanding air flow, filtration and performance. The air filter is located in the original air box space which is designed to reduce intake air temperature and increase horsepower. The intake tubing is constructed from mandrel-bent aluminum featuring a durable gunmetal gray powder coated finish. This air intake system was developed to accommodate the engine's factory emissions control devices including the IAT sensor and crank case breather hose. The tapered cylinder shaped AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). The air intake system is backed by AEM's Lifetime Limited Warranty. Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the 21-8217DC vehicle applications to determine the legal status for each vehicle.Installation InstructionsThis Part Fits: Year Make Model Submodel 2010 Dodge Caliber Express 2010 Dodge Caliber Heat 2010 Dodge Caliber Mainstreet 2007-2010 Dodge Caliber R/T 2010 Dodge Caliber Rush 2007-2010 Dodge Caliber SE 2007-2010 Dodge Caliber SXT 2010 Dodge Caliber Uptown 2007-2010 Jeep Compass Limited 2007-2010 Jeep Compass Sport 2007-2010 Jeep Patriot Limited 2007-2010 Jeep Patriot Sport

The AEM 21-8211DC Brute Force Air Intake System produces horsepower and torque gains by replacing the vehicle's restrictive factory air filter and air intake housing. This air intake system was designed, tuned and dyno-tested to fit specific Dodge Ram 2500/3500 Pickup models. Air enters the system through an extra-large AEM Dryflow synthetic washable air filter for outstanding air flow, filtration and performance. The air filter is located in the original air box space and is protected by a heat shield which is designed to reduce intake air temperature and increase horsepower. The intake tubing is constructed from mandrel-bent aluminum featuring a durable gunmetal gray powder coated finish. This air intake system was developed to accommodate the engine's factory emissions control devices including the air inlet temperature sensor and air filter restriction gauge. The tapered cylinder shaped AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). The air intake system is easy to install with commonly available tools and it is backed by AEM's Lifetime Limited Warranty. . Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards while others are 50 state legal. View the 21-8211DC vehicle applications to determine the legal status for each vehicle.Installation InstructionsThis Part Fits: Year Make Model Submodel 2003,2005-2006 Dodge Ram 2500 Laramie 2003-2006 Dodge Ram 2500 SLT 2006 Dodge Ram 2500 Sport 2003-2006 Dodge Ram 2500 ST 2006 Dodge Ram 2500 TRX4 2003-2006 Dodge Ram 3500 Laramie 2003-2006 Dodge Ram 3500 SLT 2006 Dodge Ram 3500 Sport 2003-2006 Dodge Ram 3500 ST

The AEM 21-820DS is an innovatively designed intake system to completely replace the restrictive air filter and airbox of some Infiniti QX30 models. The airbox has been crafted with premium materials and designed with 2 air scoops that feed from factory vent locations. It is aerodynamically engineered for better airflow, heat resistance, and improved aesthetics under the hood. The ECU is relocated underneath the airbox where a large vent keeps it cool. To clear the hood stand we incorporate a channel groove for a factory look on the air box. The AEM logo is showcased in a transparent badge, which also serves as a window to the filter so you know when it is time to have it serviced. The cylinder shaped AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). The air intake system is backed by AEM's Lifetime Limited Warranty. Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the 21-785DS vehicle applications to determine the legal status for each vehicle.Installation InstructionsTechnical DrawingThis Part Fits: Year Make Model Submodel 2017-2018 INFINITI QX30 Base 2019 INFINITI QX30 Essential 2019 INFINITI QX30 Luxe 2017-2018 INFINITI QX30 Luxury 2017-2018 INFINITI QX30 Premium 2019 INFINITI QX30 Pure 2017-2019 INFINITI QX30 Sport

The AEM 21-8204DC Brute Force Air Intake System produces horsepower and torque gains by replacing the vehicle's restrictive factory air filter and air intake housing. This air intake system was designed, tuned and dyno-tested to fit specific Dodge Ram 2500/3500 Pickup models. Air enters the system through an extra-large AEM Dryflow synthetic washable air filter for outstanding air flow, filtration and performance. The air filter is located in the original air box space and is protected by a heat shield which is designed to reduce intake air temperature and increase horsepower. The intake tubing is constructed from mandrel-bent aluminum featuring a durable gunmetal gray powder coated finish. This air intake system was developed to accommodate the engine's factory emissions control devices including the air filter restriction gauge. The tapered cylinder shaped AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). The air intake system is easy to install with commonly available tools and it is backed by AEM's Lifetime Limited Warranty. Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards while others are 50 state legal. View the 21-8204DC vehicle applications to determine the legal status for each vehicle.Installation InstructionsThis Part Fits: Year Make Model Submodel 1994-2002 Dodge Ram 2500 Base 1994-2002 Dodge Ram 3500 Base

The AEM 21-819 Performance Cold Air Intake System replaces both the left and right side housings. This air intake was designed to fit some Infinity Q50 and Q60 models. Both banks uses an oval shaped AEM Dryflow Air Filter. The filter media is made from a synthetic fiber that does not require oiling. The filter also provides excellent filtration and has great air flow. Maintenance is easy since the filter can be used up to 100,000 miles before cleaning is needed (depending on driving conditions). Individual heatshields keep out engine bay heat . The factory MAF sensor mounts directly on the supplied intake tube. The air intake system it is backed by AEM's Lifetime Limited Warranty. Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the 21-819 vehicle applications to determine the legal status for each vehicle.Installation InstructionsUser 1This Part Fits: Year Make Model Submodel 2016 INFINITI Q50 Premium 2016 INFINITI Q50 Red Sport 400 2016 INFINITI Q50 Sport 2017 INFINITI Q60 Premium 2017 INFINITI Q60 Red Sport 400 2017 INFINITI Q60 Sport

The AEM 21-817C Performance Cold Air Intake System produces horsepower and torque gains by replacing your vehicle's restrictive factory air filter and air intake housing. This air intake system was designed, tuned and dyno-tested to fit specific Hyundai Elantra Sport models. The oversized cone-shaped AEM Dry Flow filter is made from an oil-free, synthetic filter media and can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). This system puts the air filter low and towards the front of the car where cooler air can be found. The cooler and denser air is then channeled through the mandrel-bent aluminum intake tube into the throttle body. The factory PCV and vent hoses mount directly on the intake tube using the existing spring clamps. The air intake system is backed by AEM's Lifetime Limited Warranty. Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the 21-817C vehicle applications to determine the legal status for each vehicle.Installation InstructionsUser 1This Part Fits: Year Make Model Submodel 2017-2018 Hyundai Elantra Sport

AEM Performance Cold Air Intake Systems produce horsepower and torque gains by replacing your vehicle's restrictive factory air filter and air intake housing. This air intake system was designed, tuned and dyno-tested to fit specific Chevrolet Cruze models. Air enters the system through an oversized AEM Dryflow synthetic washable air filter for outstanding air flow, filtration and performance. The air filter is located in the original air box space and is protected by a heat shield which is designed to reduce intake air temperature and increase horsepower. The air intake tubing is constructed from mandrel-bent aluminum featuring a durable gunmetal gray powder coated finish. This air intake system was developed to accommodate the engine's factory emissions control devices including the mass air sensor. The tapered cylinder shaped AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). This air intake system is easy to install with commonly available tools. Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the vehicle applications to determine the legal status for each vehicle.Installation InstructionsUser 1This Part Fits: Year Make Model Submodel 2016-2021 Chevrolet Malibu L 2016-2025 Chevrolet Malibu LS 2016-2025 Chevrolet Malibu LT 2019-2025 Chevrolet Malibu RS

This Performance Air Intake System allows your engine to breath more air compared to the restrictive factory air intake housing. It is designed, tuned, and dyno-tested to produce more horsepower and torque. The cone-shaped AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). A custom shaped heat shield with edge trim lining is included to keep engine bay heat from the air intake. The air intake tube is constructed from mandrel-bent aluminum featuring a durable gunmetal gray powder coated finish. This air intake system is backed by AEM's Lifetime Limited Warranty. Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the vehicle applications to determine the legal status for each vehicle.Technical DrawingInstallation InstructionsThis Part Fits: Year Make Model Submodel 2021-2022,2024 Ford Expedition King Ranch 2021-2022,2024 Ford Expedition Limited 2021-2022,2024 Ford Expedition Max King Ranch 2021-2022,2024 Ford Expedition Max Limited 2021-2022,2024 Ford Expedition Max Platinum 2021-2022,2024 Ford Expedition Max SSV 2022 Ford Expedition Max XL 2021-2022,2024 Ford Expedition Max XLT 2021-2022,2024 Ford Expedition Platinum 2021-2022,2024 Ford Expedition SSV 2022,2024 Ford Expedition Timberline 2022 Ford Expedition XL 2024 Ford Expedition XL STX 2021-2022,2024 Ford Expedition XLT 2017-2024 Ford F-150 King Ranch 2017-2024 Ford F-150 Lariat 2017-2023 Ford F-150 Limited 2017-2024 Ford F-150 Platinum 2018-2024 Ford F-150 Police Responder 2017-2024 Ford F-150 Raptor 2017-2024 Ford F-150 SSV 2021-2024 Ford F-150 Tremor 2017-2024 Ford F-150 XL 2017-2024 Ford F-150 XLT

The AEM 21-8129DC Brute Force Air Intake System produces horsepower and torque gains by replacing the vehicle's restrictive factory air filter and air intake housing. This air intake system was designed, tuned and dyno-tested to fit specific Ford F150 models. Air enters the system through an extra-large AEM Dryflow synthetic washable air filter for outstanding air flow, filtration and performance. The air filter is located in the original air box space and is protected by a heat shield which is designed to reduce intake air temperature and increase horsepower. The intake tubing is constructed from mandrel-bent aluminum featuring a durable gunmetal gray powder coated finish. This air intake system was developed to accommodate the engine's factory emissions control devices including the EVAP vent and crank case vent hoses. The tapered cylinder shaped AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). The air intake system is easy to install with commonly available tools and it is backed by AEM's Lifetime Limited Warranty. Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the 21-8129DC vehicle applications to determine the legal status for each vehicle.Installation InstructionsUser 1This Part Fits: Year Make Model Submodel 2015-2020 Ford F-150 King Ranch 2015-2020 Ford F-150 Lariat 2015-2020 Ford F-150 Platinum 2016-2020 Ford F-150 SSV 2015-2020 Ford F-150 XL 2015-2020 Ford F-150 XLT

The AEM 21-8128DC Performance Cold Air Intake System produces horsepower and torque gains by replacing your vehicle's restrictive factory air filter and air intake housing. This air intake system was designed, tuned and dyno-tested to fit specific Ford F150 EcoBoost models. Air enters the system through an oversized AEM Dryflow synthetic washable air filter for outstanding air flow, filtration and performance. The air filter is located in the original air box space and is protected by a heat shield which is designed to reduce intake air temperature and increase horsepower. The air intake tubes are constructed from mandrel-bent aluminum featuring a durable gunmetal gray powder coated finish. This air intake system was developed to accommodate the engine's factory emissions control devices including the intake air temperature sensor. The dual intake AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). The air intake system is easy to install with commonly available tools and it is backed by AEM's Lifetime Limited Warranty. Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the 21-8128DC vehicle applications to determine the legal status for each vehicle.Installation InstructionsUser 1This Part Fits: Year Make Model Submodel 2015-2016 Ford F-150 King Ranch 2015-2021 Ford F-150 Lariat 2016 Ford F-150 Limited 2015-2016 Ford F-150 Platinum 2016 Ford F-150 SSV 2015-2021 Ford F-150 XL 2015-2021 Ford F-150 XLT