The K&N 69-6030-1TFK Typhoon air intake system is a free-flowing, mandrel-bent aluminum tube air induction system designed to fit some Mazda RX-8 models. The restrictive factory air filter and air intake housing are replaced by the K&N Typhoon air intake which is designed to dramatically reduce air flow restriction as it smoothes and straightens air flow. This allows your engine to inhale a larger amount of air than the factory air intake. More air means more usable power and acceleration throughout the engine's RPM range. The 69-6030-1TFK air intake comes with a K&N high-flow air filter encased within an ultra-lightweight carbon fiber housing and a heat shield that installs into the previous air box space. Air is directed through the intake tube into the engine's throttle body for a guaranteed power gain. The intake tube has an attractive flat black finish that's made to last and it accommodates the factory mass air sensor, air straightener and several vent lines. The oversized encased air filter can be used for up to 100,000 miles before servicing is needed depending on driving conditions. This air intake is relatively easy to install usually in 90 minutes or less. Some Typhoon air intakes are not legal for sale or use in California and other states adopting California emission standards while others are CARB exempt and 50 state legal. Check the K&N catalog or website for vehicle applications and specific CARB status for each vehicle and air intake.Installation InstructionsUser 1This Part Fits: Year Make Model Submodel 2008 Mazda RX-8 40th Anniversary Edition 2004-2007 Mazda RX-8 Base 2008-2011 Mazda RX-8 Grand Touring 2009-2011 Mazda RX-8 R3 2005 Mazda RX-8 Shinka 2008-2011 Mazda RX-8 Sport 2008-2009 Mazda RX-8 Touring

Experience a noticeable boost in performance with the Chevy SSR performance intake kit. Designed to maximize airflow, this K&N intake kit for the Chevy SSR delivers increased horsepower and torque while refining throttle response. Built with quality and durability in mind, it’s ideal for both the experienced enthusiast and the everyday driver.Key Benefits• Proven increase in horsepower and torque• Washable, reusable high-flow air filter lasting up to 100,000 miles• Custom heat shield that delivers cooler intake air for boosted engine performance• Quick and simple installation in under 60 minutes• Note: Some intakes may not be legal for sale or use on vehicles with pollution controls in CaliforniaInstallation & MaintenanceInstallation is straightforward—complete the setup in under 60 minutes and enjoy the advantages of a high-density polyethylene tube that enhances airflow. For detailed instructions, please refer to the Installation Instructions. Routine maintenance will keep your engine performing at its best.Vehicle Fitment• Years: 2005-2006• Make: Chevrolet• Model: SSR• Submodel: BaseFor more performance parts, explore our Air Intake Systems collection. Enjoy the reliability and quality backed by over 35 years of industry expertise, and drive confidently knowing you’re equipped with premium, unmatched performance.

Gain a guaranteed increase in horsepower and torque with a K&N cold air intake system featuring a mandrel-bent aluminum intake tube. Each system is paired with a washable, reusable High-Flow Air Filter featuring oiled cotton filter media. The oversized, conical filter design allows you to go up to 100,000 miles between filter services under normal highway driving conditions. A custom heat shield or air box helps protect intake air from the high temperature of your engine bay, and the entire system can typically be installed in less than 90 minutes. Some intakes are not legal for sale or use on any pollution controlled motor vehicle in California. See the product specifications for CARB status on each part for a specific vehicle.Installation InstructionsUser 1This Part Fits: Year Make Model Submodel 2005-2006 Cadillac Escalade Base 2005-2006 Cadillac Escalade ESV Base 2005-2006 Cadillac Escalade EXT Base 2005 Chevrolet Avalanche 1500 Base 2005-2006 Chevrolet Avalanche 1500 LS 2005-2006 Chevrolet Avalanche 1500 LT 2005-2006 Chevrolet Avalanche 1500 Z66 2005-2006 Chevrolet Avalanche 1500 Z71 2005 Chevrolet Silverado 1500 Base 2005-2006 Chevrolet Silverado 1500 Hybrid 2004-2006 Chevrolet Silverado 1500 LS 2004-2006 Chevrolet Silverado 1500 LT 2005-2006 Chevrolet Silverado 1500 SS 2005-2006 Chevrolet Silverado 1500 WT 2005 Chevrolet Silverado 1500 Z71 Off-Road 2007 Chevrolet Silverado 1500 Classic Hybrid 2007 Chevrolet Silverado 1500 Classic LS 2007 Chevrolet Silverado 1500 Classic LT 2007 Chevrolet Silverado 1500 Classic SS 2007 Chevrolet Silverado 1500 Classic WT 2006 Chevrolet Suburban 1500 Base 2005-2006 Chevrolet Suburban 1500 LS 2005-2006 Chevrolet Suburban 1500 LT 2005-2006 Chevrolet Suburban 1500 Z71 2006 Chevrolet Tahoe Base 2005-2006 Chevrolet Tahoe LS 2005-2006 Chevrolet Tahoe LT 2005-2006 Chevrolet Tahoe Z71 2005 GMC Sierra 1500 Base 2005-2006 GMC Sierra 1500 Denali 2005-2006 GMC Sierra 1500 Hybrid 2006 GMC Sierra 1500 SL 2005-2006 GMC Sierra 1500 SLE 2005-2006 GMC Sierra 1500 SLT 2005-2006 GMC Sierra 1500 WT 2007 GMC Sierra 1500 Classic Denali 2007 GMC Sierra 1500 Classic Hybrid 2007 GMC Sierra 1500 Classic SL 2007 GMC Sierra 1500 Classic SLE 2007 GMC Sierra 1500 Classic SLT 2007 GMC Sierra 1500 Classic WT 2005-2006 GMC Yukon Denali 2006 GMC Yukon SL 2005-2006 GMC Yukon SLE 2005-2006 GMC Yukon SLT 2005-2006 GMC Yukon XL 1500 Denali 2006 GMC Yukon XL 1500 SL 2005-2006 GMC Yukon XL 1500 SLE 2005-2006 GMC Yukon XL 1500 SLT

Upgrade your engine’s performance with this high-performance intake kit engineered to boost airflow, horsepower, and torque. Ideal for Chevy and GMC enthusiasts and those in search of a K&N 05 Chevy GMC Performance Intake Kit or Chevy GMC V8 Intake Kit, this system delivers both quality and efficiency.Key Benefits Guaranteed improvement in horsepower and torque High-density polyethylene intake tube optimized for enhanced airflow Washable, reusable high-flow air filter with up to a 100,000-mile service interval Custom heat shield designed to regulate engine bay temperatures Quick, tool-friendly installation in 60 minutes or less Technical Specifications Engine Compatibility: Designed for 4.6L, 5.3L, and 6.0L engines CARB/Legal Status: Some intakes may not be legal in California; please check the specific CARB status on the product page Installation Tips: Basic hand tools required for a straightforward installation in under 60 minutes Warranty: Supported by quality assurance and a limited manufacturer warranty for confident performance For detailed fitment information—including the complete compatibility list for various Cadillac, Chevrolet, and GMC models—please refer to the dedicated Fitment Guide tab on the product page. Discover more performance upgrades in our Air Intake Systems collection.Built for durability and engineered for precision, this intake kit is a reliable upgrade that meets the demands of the road, offering enhanced performance and peace of mind with every drive.

Revitalize your engine’s performance with our high-performance intake system designed for Dodge Magnum and Chrysler 300 V6-3.5L engines. Benefit from improved airflow, increased horsepower and torque, and up to 100,000 miles of filter life with a system engineered for optimum efficiency.Key Benefits• High-performance HDPE rotationally molded tube for enhanced airflow• Washable, reusable high-flow air filter with oiled cotton media for extended service intervals• Custom heat shield that prevents engine bay heat from affecting the intake air• Fast and easy installation in under 60 minutes• CARB/compliance status details available in the product specificationsWhat’s Included• Precision-engineered intake system components• Custom heat shield• Detailed installation guides (see the Installation Instructions for complete guidance)• Additional usage and performance documentationPlease note: Some intakes may not be legal for sale or use on any pollution-controlled motor vehicle in California. Check the CARB status for your specific vehicle before purchasing.This part is compatible with various Dodge and Chrysler models, including multiple configurations of the Chrysler 300 and Dodge vehicles. For a quick look at other premium air intake options, visit our Air Intake Systems collection.This Part Fits: Year Make Model Submodel 2005-2010 Chrysler 300 Limited 2010 Chrysler 300 S 2009 Chrysler 300 Signature Series 2005-2010 Chrysler 300 Touring 2009-2010 Dodge Challenger SE 2006-2007 Dodge Charger Base 2006-2010 Dodge Charger Pursuit 2006-2010 Dodge Charger SE 2006-2010 Dodge Charger SXT 2007-2008 Dodge Magnum SE 2005-2008 Dodge Magnum SXT 2005 Dodge Magnum SXT Special Edition

Experience a significant boost in your Mustang GT’s performance with an intake kit engineered for improved airflow, horsepower, and torque. Specifically designed for 2005–2006 Ford Mustang GT models, this upgrade features an HDPE rotationally-molded tube to optimize your engine’s breathing, delivering noticeable performance benefits with every drive.Key Features HDPE rotationally-molded intake tube crafted to maximize airflow Washable, reusable High-Flow Air Filter with premium oiled cotton media Custom heat shield that protects intake air from engine bay heat Quick, user-friendly installation typically under 60 minutes Extended filter service interval of up to 100,000 miles This kit is engineered not only to enhance horsepower and torque but also to simplify maintenance, backed by proven reliability and quality performance. Detailed installation instructions are provided, ensuring you can install it with confidence. Please note that, depending on your vehicle’s emissions controls, this product may not be legally used on pollution-controlled vehicles in California—check CARB status and legal guidelines for your specific model.Compatibility2005–2006 Ford Mustang GTEnhance your Mustang’s performance today—install easily and feel the difference. Explore more performance options in our Air Intake Systems collection.

Gain a guaranteed increase in horsepower and torque with a K&N cold air intake system featuring a mandrel-bent aluminum intake tube. Each system is paired with a washable, reusable High-Flow Air Filter featuring oiled cotton filter media. The oversized, conical filter design allows you to go up to 100,000 miles between filter services under normal highway driving conditions. A custom heat shield or air box helps protect intake air from the high temperature of your engine bay, and the entire system can typically be installed in less than 90 minutes. Some intakes are not legal for sale or use on any pollution controlled motor vehicle in California. See the product specifications for CARB status on each part for a specific vehicle.Installation InstructionsUser 1This Part Fits: Year Make Model Submodel 2005-2009 Ford Mustang GT 2007-2008 Ford Mustang Shelby GT

Experience an immediate increase in horsepower and torque with the premium Nissan Pathfinder V6-4.0L air intake kit. Designed to enhance airflow and engine responsiveness, this system improves performance and efficiency while supplying high-quality, dependable components for your ride.Key Features• HDPE rotationally-molded tube engineered to boost airflow and performance• Washable, reusable high-flow air filter featuring oiled cotton media for lasting filtration• Oversized, conical design supports up to 100,000 miles between filter services under normal conditions• Custom heat shield to help keep intake air cool even under intense engine bay conditions• Quick, user-friendly installation—typically completed in under 60 minutesFitment & Technical DetailsSpecifically designed for the Nissan Pathfinder V6-4.0L, this kit is also compatible with select Nissan models. Key specifications include:• Durable construction using high-density polyethylene (HDPE)• Engineered airflow enhancements for measurable power improvements• Easy-to-follow installation guides available here: Installation InstructionsLegal and Regulatory Notes• Some intakes may be illegal for sale or use on pollution-controlled vehicles in California.• Please refer to the product specifications for CARB compliance details specific to your vehicle.Discover more performance upgrades by visiting our Air Intake Systems collection.

Gain a guaranteed increase in horsepower and torque with a K&N cold air intake system featuring a mandrel-bent aluminum intake tube. Each system is paired with a washable, reusable High-Flow Air Filter featuring oiled cotton filter media. The oversized, conical filter design allows you to go up to 100,000 miles between filter services under normal highway driving conditions. A custom heat shield or air box helps protect intake air from the high temperature of your engine bay, and the entire system can typically be installed in less than 90 minutes. Some intakes are not legal for sale or use on any pollution controlled motor vehicle in California. See the product specifications for CARB status on each part for a specific vehicle.Installation InstructionsUser 1This Part Fits: Year Make Model Submodel 2005 Pontiac GTO Base

Experience a new level of performance with the K&N 05 Pontiac GTO intake kit, designed exclusively for the 2005 Pontiac GTO V8. This high-performance intake system increases airflow to your engine, resulting in a guaranteed boost in horsepower and torque, improved throttle response, and a more aggressive engine sound. Whether you're a performance enthusiast or using it for daily driving, every component is built for quality and durability.Key Features and Benefits Durable HDPE rotationally-molded tube that maximizes airflow Washable and reusable high-flow air filter featuring oiled cotton media Oversized, conical filter design providing up to 100,000 miles between services Custom heat shield that protects intake air from engine heat Quick and simple installation in less than 60 minutes with basic hand tools Enhanced engine performance with a guaranteed increase in horsepower and torque This Part Fits Year: 2005 Make: Pontiac Model: GTO Submodel: Base Please note: This intake kit is not legal for use on any pollution-controlled motor vehicle in California. For complete CARB status information for your specific vehicle, please refer to the product specifications.Discover more innovative performance parts in our K&N Engineering collection and elevate your ride today.

Experience the thrill of peak performance with this advanced Dodge Dakota V8 intake kit designed to not only boost engine power but also enhance your overall driving experience. Created specifically as a performance intake kit for the Dodge Dakota, its innovative HDPE rotationally-molded tube increases airflow, helping you gain up to 7–10 HP and 8–12 lb-ft of torque. Enjoy improved throttle response and a refined engine note that elevate your ride, all while benefiting from an easy installation process and lasting durability. Discover additional performance parts in our Air Intake Systems collection.Key Features Gain up to 7–10 HP and 8–12 lb-ft of torque for a noticeable performance boost. Enjoy enhanced throttle response and an improved engine sound for a more exhilarating drive. Constructed from high-density polyethylene (HDPE) to optimize airflow. Comes with a washable, reusable High-Flow Air Filter featuring oiled cotton media. Oversized, conical filter design allows for maintenance intervals of up to 100,000 miles. Custom heat shield protects intake air from the high temperatures in the engine bay. Typically installs in less than 60 minutes using simple hand tools. Note: Some intakes, including this K&N intake kit for the Dodge Dakota, may not be legal for use on pollution-controlled vehicles in California—please review the CARB status in the product specifications. Installation is straightforward, with clear instructions to help you upgrade your vehicle quickly. Always check local regulations before use to ensure compliance with emission standards, especially in California.This part fits vehicles as shown below: Year Make Model Submodel 2009-2010 Dodge Dakota Big Horn 2005-2010 Dodge Dakota Laramie 2009-2010 Dodge Dakota Lone Star 2005-2008 Dodge Dakota SLT 2005,2008 Dodge Dakota Sport 2005-2007,2010 Dodge Dakota ST 2008 Dodge Dakota SXT 2008 Dodge Dakota TRX 2008-2010 Dodge Dakota TRX4 2006 Mitsubishi Raider DuroCross 2007 Mitsubishi Raider LS 2007 Mitsubishi Raider SE 2006 Mitsubishi Raider XLS

Upgrade your engine performance with our high-performance intake system, designed to deliver increased horsepower and torque. This innovative Ford F-Series performance intake solution offers an optimal experience for buyers seeking a K&N intake kit for the Ford Super Duty, enhancing airflow while providing improved throttle response and a dynamic engine sound. Discover our collection of high-performance products in our Air Intake Systems selection.Key Features Rotationally molded high-density polyethylene (HDPE) tube for maximum airflow Washable, reusable High-Flow Air Filter featuring premium oiled cotton media Custom heat shield that protects intake air from high engine bay temperatures Simple installation in less than 60 minutes Extended service life – up to 100,000 miles under typical highway conditions CARB compliance note: Some models are not legal for use on pollution-controlled vehicles in California Technical Details & Fitment 2005 Ford F-250 Super Duty – Harley-Davidson Edition 2005-2006 Ford F-250 Super Duty – King Ranch, Lariat, XL, XLT 2005 Ford F-350 Super Duty – Harley-Davidson Edition 2005-2006 Ford F-350 Super Duty – King Ranch, Lariat, XL, XLT Helpful Resources View Installation Instructions User Manual

Experience a noticeable boost in power and efficiency with our high-performance intake system engineered specifically for the Ford F250 V8-5.4L. This innovative kit is designed as a premium “K&N Ford F250 intake kit” and also serves as a “05-06 Ford F250 performance intake kit” and “Ford F250 5.4L intake system” to help maximize horsepower, torque, and throttle response. Constructed with a high-density polyethylene (HDPE) rotationally molded tube and paired with a washable, reusable high-flow air filter, this system delivers consistent airflow improvements while ensuring long-lasting durability. Installation is fast and straightforward, so you can upgrade your engine in under 60 minutes.Key Performance Features Guaranteed increases in horsepower and torque Enhanced airflow thanks to a precision-engineered HDPE tube Washable, reusable high-flow air filter with up to 100,000 miles of service life Simple installation process (typically under 60 minutes) Custom heat shield to protect intake air from engine heat Legal & Warranty Information Not legal on any pollution-controlled motor vehicle in California; please verify CARB status Supported by the K&N No-Hassle Lifetime Limited Warranty For detailed guidance, please review our Installation Instructions and User Manual.Fits Year Make Model Submodel 2005 Ford Excursion Eddie Bauer 2005 Ford Excursion Limited 2005 Ford Excursion XLS 2005 Ford Excursion XLT 2005-2006 Ford F-250 Super Duty King Ranch 2005-2006 Ford F-250 Super Duty Lariat 2005-2006 Ford F-250 Super Duty XL 2005-2006 Ford F-250 Super Duty XLT 2005-2006 Ford F-350 Super Duty King Ranch 2005-2006 Ford F-350 Super Duty Lariat 2005-2006 Ford F-350 Super Duty XL 2005-2006 Ford F-350 Super Duty XLT Explore our Air Intake Systems collection for additional performance upgrades and accessories to complete your vehicle’s transformation.

Enhance your diesel engine’s performance with the K&N 05-06 GM 2500HD/3500HD V8-6.6L Turbo Diesel Performance Intake Kit. This innovative kit boosts horsepower and torque while improving throttle response with a durable, high-flow design that elevates overall performance.• Durable high-density polyethylene (HDPE) molded tube paired with a custom heat shield for optimal airflow• Washable, reusable high-flow air filter featuring oiled cotton media—serviceable up to 100,000 miles• Quick, user-friendly installation typically completed in under 60 minutes• CARB emissions compliance information provided for proper legal use• Standard warranty details apply—please review specifics for your vehicleDesigned for serious performance gains, this intake kit optimizes airflow and enhances engine efficiency, delivering noticeable improvements in throttle response and increased power. Built with advanced technology, it ensures reliable operation while meeting strict emission standards—a must-have upgrade for any diesel performance enthusiast.Compatible Vehicles• 2005 Chevrolet Silverado 2500HD (Base, LS, LT, WT)• 2005-2006 Chevrolet Silverado 3500 series• Various GMC Sierra models designed for both HD and Classic trimsFor more high-performance air intake options, visit our Air Intake Systems collection at https://www.everythingtruckparts.com/collections/air-intake-systems. Enjoy enhanced driving dynamics with a trusted K&N intake kit—designed for enthusiasts who demand quality and reliability.

Experience a powerful engine upgrade with the K&N 05-06 Honda Ridgeline performance intake kit. This performance intake for the Honda Ridgeline is designed to maximize airflow, delivering noticeable increases in horsepower and torque, while sharpening throttle response and creating a more aggressive engine note. Enjoy these benefits:• Guaranteed increase in horsepower and torque• Filter life of up to 100,000 miles• Simple installation in less than 60 minutes• Custom heat shield to protect the engine bay• Washable, reusable high-flow air filter for lasting performanceHigh-density polyethylene tubing is engineered to streamline airflow, ensuring your engine breathes easier and responds faster under acceleration. The oversized, conical filter not only enhances performance but also reduces maintenance costs by lowering the frequency of filter replacements. With step-by-step instructions, installation is straightforward—making this kit a favorite among Jeep, truck, and 4WD enthusiasts.Easy InstallationEnjoy a user-friendly setup process that usually takes less than 60 minutes, even for beginners in performance modifications. Clear instructions and quality components mean you’ll be back on the road quickly with improved performance.Fitment DetailsThis kit is specifically engineered for: Year Make Model Submodel 2006-2008 Honda Ridgeline RT 2006-2008 Honda Ridgeline RTL 2006-2008 Honda Ridgeline RTS 2007-2008 Honda Ridgeline RTX For additional performance upgrades, explore our Air Intake Systems collection.Please note: Some intakes may not be legal for use on pollution-controlled vehicles in California. Always review product specifications for CARB status and ensure compliance with local regulations.

Enhance your 4.7L V8 engine’s performance with our high-efficiency K&N Jeep Grand Cherokee intake kit. Designed for Jeep Commander and Jeep Grand Cherokee models, this performance intake kit increases horsepower and torque while ensuring reliable, long-lasting operation under any conditions.Key Benefits• Built with a durable HDPE rotationally-molded tube for optimal airflow.• Features a washable, reusable high-flow air filter with oiled cotton media that extends service intervals up to 100,000 miles.• Includes a custom heat shield to protect intake air from engine heat.• Enjoy a straightforward installation that typically takes less than 60 minutes.• Meets CARB requirements—review specifications for vehicle-specific compliance.Installation & Legal InformationInstallation is simple with detailed instructions provided in our installation documents. Please note that some intakes may not be legal for sale or use on pollution-controlled vehicles in California; always confirm the CARB status for your specific vehicle.Compatibility DetailsThis high-performance kit is compatible with several Jeep models, including:• 2006 Jeep Commander 65th Anniversary Edition• 2006–2007 Jeep Commander (Base)• 2006–2009 Jeep Commander (Limited)• 2007–2009 Jeep Commander (Sport)• 2006 Jeep Grand Cherokee 65th Anniversary Edition• 2005–2009 Jeep Grand Cherokee (Laredo and Limited)Explore additional options in our Air Intake Systems collection or browse our All Products for more upgrades.

The K&N 69-8608TFK Typhoon air intake system is a free-flowing, mandrel-bent aluminum tube air induction system designed to fit some Scion TC models. The restrictive factory air filter and air intake housing are replaced by the K&N Typhoon air intake which is designed to dramatically reduce air flow restriction as it smoothes and straightens air flow. This allows your engine to inhale a larger amount of air than the factory air intake. More air means more usable power and acceleration throughout the engine's RPM range. The 69-8608TFK air intake comes with a K&N high-flow air filter and filter cage that installs into the stock upper air cleaner cover. Air is directed through the intake tube into the engine's throttle body for a guaranteed power gain. The intake tube has an attractive black powder-coat finish that's made to last and it accommodates the factory mass air sensor, vacuum switching valve and crank case vent hose. The custom rectangular air filter can be used for up to 100,000 miles before servicing is needed depending on driving conditions. This air intake is relatively easy to install usually in 90 minutes or less using existing factory mounting points. The tools needed are a couple of screwdrivers, needle nose pliers, a ratchet set and some wrenches. Some Typhoon air intakes are not legal for sale or use in California and other states adopting California emission standards while others are CARB exempt and 50 state legal. Check the K&N catalog or website for vehicle applications and specific CARB status for each vehicle and air intake.Installation InstructionsUser 1Installation InstructionsThis Part Fits: Year Make Model Submodel 2005-2006 Scion tC Base

Experience outstanding performance with our cutting-edge K&N performance intake kit, specifically engineered for the Dodge Magnum, Chrysler 300, and V6-2.7L engines. This state-of-the-art system—featuring an HDPE rotationally molded tube and a washable High-Flow Air Filter with oiled cotton media—increases horsepower and torque while delivering exceptional durability and minimal upkeep. Designed for both enthusiasts and professionals, this intake kit meets the highest performance standards.Key Features Enhanced Airflow: The HDPE tube design enhances engine airflow, resulting in noticeable power gains. Extended Service Life: The oversized, conical filter design allows up to 100,000 miles between services under typical highway conditions. Reusable: The washable filter provides an eco-friendly and cost-effective maintenance solution. Custom Heat Shield: Shields the intake air from engine bay heat to preserve optimal performance. Fast Installation: Most installations are completed in under 60 minutes with minimal tools. CARB Compliance: Product specifications include CARB status details for compliant vehicles. Guaranteed Performance: Specifically engineered to deliver a guaranteed increase in horsepower and torque. Installation & FitmentInstallation is simple with clear instructions provided. For detailed, step-by-step guidance, please Download Installation Instructions. This kit is compatible with select models from 2005-2010 for Dodge and Chrysler vehicles, including the Dodge Magnum intake kit and Chrysler 300 performance parts configurations.Browse our complete range of innovative air intake solutions in our Air Intake Systems collection and upgrade your ride today.

Gain a guaranteed increase in horsepower and torque with a K&N cold air intake system featuring a mandrel-bent aluminum intake tube. Each system is paired with a washable, reusable High-Flow Air Filter featuring oiled cotton filter media. The oversized, conical filter design allows you to go up to 100,000 miles between filter services under normal highway driving conditions. A custom heat shield or air box helps protect intake air from the high temperature of your engine bay, and the entire system can typically be installed in less than 90 minutes. Some intakes are not legal for sale or use on any pollution controlled motor vehicle in California. See the product specifications for CARB status on each part for a specific vehicle.Installation InstructionsUser 1This Part Fits: Year Make Model Submodel 2004-2005 Honda Accord DX 2004-2007 Honda Accord EX 2007 Honda Accord EX-L 2004-2007 Honda Accord LX 2006 Honda Accord LX Special Edition 2005 Honda Accord SE 2007 Honda Accord Special Edition 2006-2007 Honda Accord Value Package

Enhance your Jeep Grand Cherokee’s performance with this premium intake kit engineered to boost engine airflow, delivering increased horsepower and torque. Crafted with high-quality materials and innovative design, this system is ideal for vehicle enthusiasts looking to upgrade their intake performance while benefiting from extended service intervals and simplified maintenance.Key Features• HDPE Rotationally-Molded Tube: Maximizes airflow to deliver noticeable improvements in horsepower and torque.• Washable High-Flow Air Filter: Features oiled cotton media for enhanced filtration and durability.• Oversized Conical Design: Provides up to 100,000 miles between filter services under normal highway driving conditions.• Custom Heat Shield: Protects intake air from engine bay heat to maintain peak performance.• Quick Install: Most setups can be completed in 60 minutes or less using common automotive tools.Installation & Legal InformationInstallation is straightforward with clear instructions included, allowing you to experience improved engine efficiency in under an hour. Please note that some parts may not be legal for use on pollution-controlled vehicles in California—verify the CARB status for your specific model.For more performance-focused upgrades, explore our Air Intake Systems collection. If you drive a Jeep Grand Cherokee, be sure to check out our dedicated collection for Jeep Grand Cherokee 2005-2010 Parts.Vehicle Compatibility Year Make Model Submodel 2006 Jeep Commander 65th Anniversary Edition 2006-2007 Jeep Commander Base 2007-2010 Jeep Commander Sport 2006 Jeep Grand Cherokee 65th Anniversary Edition 2005-2010 Jeep Grand Cherokee Laredo 2009-2010 Jeep Grand Cherokee Limited

Gain a guaranteed increase in horsepower and torque with a K&N cold air intake system featuring a mandrel-bent aluminum intake tube. Each system is paired with a washable, reusable High-Flow Air Filter featuring oiled cotton filter media. The oversized, conical filter design allows you to go up to 100,000 miles between filter services under normal highway driving conditions. A custom heat shield or air box helps protect intake air from the high temperature of your engine bay, and the entire system can typically be installed in less than 90 minutes. Some intakes are not legal for sale or use on any pollution controlled motor vehicle in California. See the product specifications for CARB status on each part for a specific vehicle.Installation InstructionsUser 1This Part Fits: Year Make Model Submodel 2006 Jeep Commander 65th Anniversary Edition 2006-2007 Jeep Commander Base 2006-2009 Jeep Commander Limited 2007-2009 Jeep Commander Sport 2006 Jeep Grand Cherokee 65th Anniversary Edition 2005-2009 Jeep Grand Cherokee Laredo 2005-2009 Jeep Grand Cherokee Limited

Experience improved performance with the K&N 05-07 Jeep Grand Cherokee V8-5.7L Performance Intake Kit that increases your engine’s airflow for a guaranteed boost in horsepower and torque. This kit is crafted for Jeep Grand Cherokees and enhances your vehicle’s performance with precision-engineered quality.Key Features Guaranteed increase in horsepower and torque for better engine performance. High-density polyethylene (HDPE) rotationally molded tube ensures superior durability. Washable, reusable High-Flow Air Filter with oiled cotton media supports up to 100,000 miles between services. Custom heat shield protects incoming air from the high temperatures in the engine bay. Quick installation in less than 60 minutes, so you can get back on the road quickly. Technical Details Material: HDPE rotationally molded tube engineered for strength and longevity. Filter Media: Oiled cotton filter delivers high airflow with easy maintenance. Performance: Provides a guaranteed boost in horsepower and torque. Compliance: Verify CARB status for legal use on pollution-controlled vehicles in California. Installation & WarrantyInstallation is simple with detailed instructions provided. Enjoy the peace of mind that comes with a performance kit combining quality, ease of installation, and exceptional durability. Warranty information is available with your purchase.Compatible Models2005-2010 Jeep Grand Cherokee (Laredo, Limited, Overland variants)Explore more performance-enhancing products in our Jeep Grand Cherokee 2005-2010 Parts collection.

Gain a guaranteed increase in horsepower and torque with a K&N cold air intake system featuring a mandrel-bent aluminum intake tube. Each system is paired with a washable, reusable High-Flow Air Filter featuring oiled cotton filter media. The oversized, conical filter design allows you to go up to 100,000 miles between filter services under normal highway driving conditions. A custom heat shield or air box helps protect intake air from the high temperature of your engine bay, and the entire system can typically be installed in less than 90 minutes. Some intakes are not legal for sale or use on any pollution controlled motor vehicle in California. See the product specifications for CARB status on each part for a specific vehicle.Installation InstructionsUser 1This Part Fits: Year Make Model Submodel 2005-2007 Toyota Sequoia Limited 2005-2007 Toyota Sequoia SR5 2005-2006 Toyota Tundra Base 2005-2006 Toyota Tundra Limited 2005-2006 Toyota Tundra SR5

A high-density polyethylene (HDPE) rotationally-molded tube helps increase the volume of airflow to your engine, and provides a guaranteed increase in horsepower and torque. These systems are paired with a washable, reusable High-Flow Air Filter featuring oiled cotton filter media. The oversized, conical design allows you to go up to 100,000 miles between filter services under normal highway driving conditions. A custom heat shield helps protect intake air from the high temperature of your engine bay, and the entire system can typically be installed in less than 60 minutes. Some intakes are not legal for sale or use on any pollution controlled motor vehicle in California. See the product specifications for CARB status on each part for a specific vehicle.Installation InstructionsUser 1This Part Fits: Year Make Model Submodel 2005-2007 Toyota Sequoia Limited 2005-2007 Toyota Sequoia SR5 2005-2006 Toyota Tundra Base 2005-2006 Toyota Tundra Limited 2005-2006 Toyota Tundra SR5

Gain a guaranteed increase in horsepower and torque with a K&N cold air intake system featuring a mandrel-bent aluminum intake tube. Each system is paired with a washable, reusable High-Flow Air Filter featuring oiled cotton filter media. The oversized, conical filter design allows you to go up to 100,000 miles between filter services under normal highway driving conditions. A custom heat shield or air box helps protect intake air from the high temperature of your engine bay, and the entire system can typically be installed in less than 90 minutes. Some intakes are not legal for sale or use on any pollution controlled motor vehicle in California. See the product specifications for CARB status on each part for a specific vehicle.Installation InstructionsUser 1This Part Fits: Year Make Model Submodel 2009-2010 Dodge Dakota Big Horn 2005-2010 Dodge Dakota Laramie 2009-2010 Dodge Dakota Lone Star 2005-2008 Dodge Dakota SLT 2005,2008 Dodge Dakota Sport 2005-2007,2010 Dodge Dakota ST 2008 Dodge Dakota SXT 2008 Dodge Dakota TRX 2008-2010 Dodge Dakota TRX4 2006 Mitsubishi Raider DuroCross 2007 Mitsubishi Raider LS 2007 Mitsubishi Raider SE 2006 Mitsubishi Raider XLS

Gain a guaranteed increase in horsepower and torque with a K&N cold air intake system featuring a mandrel-bent aluminum intake tube. Each system is paired with a washable, reusable High-Flow Air Filter featuring oiled cotton filter media. The oversized, conical filter design allows you to go up to 100,000 miles between filter services under normal highway driving conditions. A custom heat shield or air box helps protect intake air from the high temperature of your engine bay, and the entire system can typically be installed in less than 90 minutes. Some intakes are not legal for sale or use on any pollution controlled motor vehicle in California. See the product specifications for CARB status on each part for a specific vehicle.Installation InstructionsUser 1This Part Fits: Year Make Model Submodel 2007 Subaru Legacy 2.5i Special Edition 2005-2006 Subaru Legacy GT 2005,2007-2009 Subaru Legacy GT Limited 2006-2009 Subaru Legacy GT spec.B 2005 Subaru Legacy i 2005 Subaru Legacy Limited

Experience a noticeable boost in engine performance with this advanced air intake system. Made with high-density polyethylene (HDPE) and featuring a washable, reusable High-Flow Air Filter with premium oiled cotton media, this setup increases airflow by up to 16%—resulting in an estimated gain of 12–23 HP while also enhancing overall torque.Key Benefits• Improved Performance: Enjoy increased airflow that delivers enhanced horsepower and torque for a more dynamic driving experience.• Long-Lasting Durability: The conical filter design offers a service life of up to 100,000 miles under normal highway conditions.• Engine Protection: A custom heat shield protects the intake air from excessive engine bay temperatures.• Easy Installation: Designed for a quick, hassle-free setup, most installations take less than 60 minutes – a great option for those seeking a performance intake installation solution.This system is engineered for select models, including Chrysler 300 trims (such as the 300C performance intake variants), Dodge Challenger, and Charger versions—ideal for enthusiasts looking to purchase a K&N intake for Magnum or upgrade to a K&N Charger performance intake. It’s also recommended for builds that pair best with a K&N Challenger air intake system for your vehicle.Please note: Some intakes may not be legal for sale or use on pollution-controlled vehicles in California. Refer to the product’s CARB status and specifications for your vehicle.Discover more innovative air intake upgrades in our Air Intake Systems and K&N Engineering collections.

Gain a guaranteed increase in horsepower and torque with a K&N cold air intake system featuring a mandrel-bent aluminum intake tube. Each system is paired with a washable, reusable High-Flow Air Filter featuring oiled cotton filter media. The oversized, conical filter design allows you to go up to 100,000 miles between filter services under normal highway driving conditions. A custom heat shield or air box helps protect intake air from the high temperature of your engine bay, and the entire system can typically be installed in less than 90 minutes. Some intakes are not legal for sale or use on any pollution controlled motor vehicle in California. See the product specifications for CARB status on each part for a specific vehicle.Installation InstructionsUser 1This Part Fits: Year Make Model Submodel 2005-2020 Chrysler 300 C 2012-2014 Chrysler 300 C Luxury 2015-2017 Chrysler 300 C Platinum 2005-2010 Chrysler 300 C SRT8 2018 Chrysler 300 Limited 2010,2012-2023 Chrysler 300 S 2018 Chrysler 300 Touring 2009-2023 Dodge Challenger R/T 2012 Dodge Challenger R/T Classic 2015-2016 Dodge Challenger R/T Plus 2016 Dodge Challenger R/T Plus Shaker 2016 Dodge Challenger R/T Shaker 2008-2010 Dodge Challenger SRT8 2017-2018 Dodge Challenger T/A 2017-2018 Dodge Charger Daytona 2006 Dodge Charger Daytona R/T 2006-2023 Dodge Charger Pursuit 2006-2023 Dodge Charger R/T 2015-2016 Dodge Charger R/T Road & Track 2008-2014 Dodge Charger SE 2006-2010 Dodge Charger SRT8 2005-2008 Dodge Magnum R/T 2006-2008 Dodge Magnum SRT8

A high-density polyethylene (HDPE) rotationally-molded tube helps increase the volume of airflow to your engine, and provides a guaranteed increase in horsepower and torque. These systems are paired with a washable, reusable High-Flow Air Filter featuring oiled cotton filter media. The oversized, conical design allows you to go up to 100,000 miles between filter services under normal highway driving conditions. A custom heat shield helps protect intake air from the high temperature of your engine bay, and the entire system can typically be installed in less than 60 minutes. Some intakes are not legal for sale or use on any pollution controlled motor vehicle in California. See the product specifications for CARB status on each part for a specific vehicle.Installation InstructionsUser 1This Part Fits: Year Make Model Submodel 2005-2008 Lexus GX470 Base 2005-2008 Toyota 4Runner Limited 2005-2008 Toyota 4Runner Sport 2005-2008 Toyota 4Runner SR5

Gain a guaranteed increase in horsepower and torque with a K&N cold air intake system featuring a mandrel-bent aluminum intake tube. Each system is paired with a washable, reusable High-Flow Air Filter featuring oiled cotton filter media. The oversized, conical filter design allows you to go up to 100,000 miles between filter services under normal highway driving conditions. A custom heat shield or air box helps protect intake air from the high temperature of your engine bay, and the entire system can typically be installed in less than 90 minutes. Some intakes are not legal for sale or use on any pollution controlled motor vehicle in California. See the product specifications for CARB status on each part for a specific vehicle.Installation InstructionsUser 1This Part Fits: Year Make Model Submodel 2005,2010 Chevrolet Cobalt Base 2005-2010 Chevrolet Cobalt LS 2005-2010 Chevrolet Cobalt LT 2006-2007 Chevrolet Cobalt LTZ

Gain a guaranteed increase in horsepower and torque with a K&N cold air intake system featuring a mandrel-bent aluminum intake tube. Each system is paired with a washable, reusable High-Flow Air Filter featuring oiled cotton filter media. The oversized, conical filter design allows you to go up to 100,000 miles between filter services under normal highway driving conditions. A custom heat shield or air box helps protect intake air from the high temperature of your engine bay, and the entire system can typically be installed in less than 90 minutes. Some intakes are not legal for sale or use on any pollution controlled motor vehicle in California. See the product specifications for CARB status on each part for a specific vehicle.Installation InstructionsUser 1This Part Fits: Year Make Model Submodel 2005-2009 Ford Mustang Base

The K&N 05-09 Ford Mustang V6-4.0L Performance Intake Kit is designed for car enthusiasts looking to boost engine performance. Crafted with precision, this intake kit improves airflow and delivers increased horsepower and torque, perfect for both everyday drivers and performance lovers.Key Features• HDPE rotationally-molded tube optimizes airflow efficiency• Washable, reusable high-flow air filter with oiled cotton media supports up to 100,000 miles between services• Custom heat shield reduces the impact of engine bay temperatures• Fast, user-friendly installation—usually completed in less than 60 minutes• Engineered for reliable, long-term performance with a commitment to qualityInstallation & ComplianceInstallation is simple with detailed instructions available in our resources. Refer to the Installation Instructions and User Manual for complete installation steps. Please note that this performance kit might not be legal for use on pollution-controlled vehicles in California; check the CARB status for your specific vehicle.Fit ForIdeal for 2005-2009 Ford Mustang Base models, this performance intake kit is precisely engineered for your vehicle.Discover more high-performance options in our Air Intake Systems collection.

Gain a guaranteed increase in horsepower and torque with a K&N cold air intake system featuring a mandrel-bent aluminum intake tube. Each system is paired with a washable, reusable High-Flow Air Filter featuring oiled cotton filter media. The oversized, conical filter design allows you to go up to 100,000 miles between filter services under normal highway driving conditions. A custom heat shield or air box helps protect intake air from the high temperature of your engine bay, and the entire system can typically be installed in less than 90 minutes. Some intakes are not legal for sale or use on any pollution controlled motor vehicle in California. See the product specifications for CARB status on each part for a specific vehicle.Installation InstructionsUser 1This Part Fits: Year Make Model Submodel 2013-2019 Nissan Frontier Desert Runner 2005-2010 Nissan Frontier LE 2005-2008 Nissan Frontier Nismo Off-Road 2009-2019 Nissan Frontier PRO-4X 2011-2019 Nissan Frontier S 2005-2010 Nissan Frontier SE 2011-2019 Nissan Frontier SL 2011-2019 Nissan Frontier SV 2005-2012 Nissan Pathfinder LE 2006-2012 Nissan Pathfinder S 2005-2010 Nissan Pathfinder SE 2005-2009 Nissan Pathfinder SE Off-Road 2011-2012 Nissan Pathfinder Silver Edition 2011-2012 Nissan Pathfinder SV 2005 Nissan Pathfinder XE 2005-2010 Nissan Xterra Off-Road 2011-2015 Nissan Xterra PRO-4X 2005-2015 Nissan Xterra S 2005-2010 Nissan Xterra SE 2006-2015 Nissan Xterra X

A high-density polyethylene (HDPE) rotationally-molded tube helps increase the volume of airflow to your engine, and provides a guaranteed increase in horsepower and torque. These systems are paired with a washable, reusable High-Flow Air Filter featuring oiled cotton filter media. The oversized, conical design allows you to go up to 100,000 miles between filter services under normal highway driving conditions. A custom heat shield helps protect intake air from the high temperature of your engine bay, and the entire system can typically be installed in less than 60 minutes. Some intakes are not legal for sale or use on any pollution controlled motor vehicle in California. See the product specifications for CARB status on each part for a specific vehicle.Installation InstructionsUser 1This Part Fits: Year Make Model Submodel 2005-2015 Toyota Tacoma Base 2005-2015 Toyota Tacoma Pre Runner 2016-2023 Toyota Tacoma SR 2016-2023 Toyota Tacoma SR5

Gain a guaranteed increase in horsepower and torque with a K&N cold air intake system featuring a mandrel-bent aluminum intake tube. Each system is paired with a washable, reusable High-Flow Air Filter featuring oiled cotton filter media. The oversized, conical filter design allows you to go up to 100,000 miles between filter services under normal highway driving conditions. A custom heat shield or air box helps protect intake air from the high temperature of your engine bay, and the entire system can typically be installed in less than 90 minutes. Some intakes are not legal for sale or use on any pollution controlled motor vehicle in California. See the product specifications for CARB status on each part for a specific vehicle.Installation InstructionsUser 1This Part Fits: Year Make Model Submodel 2005-2015 Toyota Tacoma Base 2005-2015 Toyota Tacoma Pre Runner 2016-2023 Toyota Tacoma SR 2016-2023 Toyota Tacoma SR5

Gain a guaranteed increase in horsepower and torque with a K&N cold air intake system featuring a mandrel-bent aluminum intake tube. Each system is paired with a washable, reusable High-Flow Air Filter featuring oiled cotton filter media. The oversized, conical filter design allows you to go up to 100,000 miles between filter services under normal highway driving conditions. A custom heat shield or air box helps protect intake air from the high temperature of your engine bay, and the entire system can typically be installed in less than 90 minutes. Some intakes are not legal for sale or use on any pollution controlled motor vehicle in California. See the product specifications for CARB status on each part for a specific vehicle.Installation InstructionsUser 1This Part Fits: Year Make Model Submodel 2006-2010 Jeep Commander Limited 2007-2009 Jeep Commander Overland 2010 Jeep Commander Sport 2010 Jeep Grand Cherokee Laredo 2005-2010 Jeep Grand Cherokee Limited 2006-2009 Jeep Grand Cherokee Overland