Upgrade your engine performance with the K&N intake kit designed exclusively for the 2002–2004 Chevy Avalanche V8-5.3L. Engineered for increased airflow, this kit boosts horsepower and torque for a more responsive drive. Built with a high-density polyethylene rotationally molded tube and a high-flow, washable air filter that lasts up to 100,000 miles, each component is crafted to enhance your vehicle’s efficiency and longevity.Performance Benefits• Guaranteed improvements in horsepower and torque• Extended cleaning intervals with a reusable high-flow air filter• Custom heat shield for a cooler, denser air intake• Quick installation in under 60 minutes• Note: Certain intakes may not meet California emission standards (check CARB status)Installation Made Easy• Carefully review the provided installation instructions before starting• Follow the step-by-step guide to secure all components, ensuring optimal performance• Detailed instructions are available here and hereFits Your Chevy Avalanche Year Make Model Submodel 2002-2004 Chevrolet Avalanche 1500 Base 2002-2003 Chevrolet Avalanche 1500 North Face 2002-2003 Chevrolet Avalanche 1500 On Road Edition 2003 Chevrolet Avalanche 1500 WBH 2004 Chevrolet Avalanche 1500 Z66 2002-2004 Chevrolet Avalanche 1500 Z71 For more performance upgrades, explore our Air Intake Systems.

The K&N 69-4510TS Typhoon air intake system is a free-flowing, mandrel-bent aluminum tube air induction system designed to fit some Chevrolet Cavalier and Pontiac Sunfire models. The restrictive factory air filter and air intake housing are replaced by the K&N Typhoon air intake which is designed to dramatically reduce air flow restriction as it smoothes and straightens air flow. This allows your engine to inhale a larger amount of air than the factory air intake. More air means more usable power and acceleration throughout the engine's RPM range. The 69-4510TS air intake comes with a black rubber topped K&N high-flow air filter that installs into the previous air box space. Air is directed through the intake tube into the engine's throttle body for a guaranteed power gain. The oversized cone shaped air filter can be used for up to 100,000 miles before servicing is needed depending on driving conditions. This air intake is relatively easy to install usually in 90 minutes or less using existing factory mounting points. The tools needed are a couple of screwdrivers, pliers and a ratchet set. Some Typhoon air intakes are not legal for sale or use in California and other states adopting California emission standards while others are CARB exempt and 50 state legal. Check the K&N catalog or website for vehicle applications and specific CARB status for each vehicle and air intake.Installation InstructionsUser 1This Part Fits: Year Make Model Submodel 2002-2005 Chevrolet Cavalier Base 2002-2005 Chevrolet Cavalier LS 2002-2005 Chevrolet Cavalier LS Sport 2002 Chevrolet Cavalier Z24 2002-2003 Pontiac Sunfire GT 2002-2004 Pontiac Sunfire SE

Experience the precision and power of the K&N 02-04 Chevy Trailblazer L6-4.2L Performance Intake Kit, engineered to boost your engine’s airflow, horsepower, and torque. This performance intake kit is designed for Jeep, truck, and 4WD enthusiasts seeking improved throttle response and an exhilarating engine sound.Key Benefits Increases horsepower and torque for enhanced performance Provides improved throttle response and a refined engine sound Quick, typically under 60-minute installation Durable, washable high-flow air filter rated for up to 100,000 miles Custom heat shield maintains optimal intake air temperature Technical Details High-density polyethylene (HDPE) rotationally-molded tube amplifies airflow volume Oiled cotton filter media in a robust high-flow design ensures consistent filtration Oversized conical design maximizes longevity and supports superior performance Constructed from quality materials engineered for reliability under demanding conditions Fitment Overview 2002-2005 Chevrolet Trailblazer LS, LT; 2002-2003 Trailblazer LTZ; 2002-2004 Trailblazer North Face 2003-2005 Trailblazer EXT LS; 2002-2005 Trailblazer EXT LT; 2002-2004 Trailblazer EXT North Face 2002-2005 GMC Envoy and Envoy XL (SLE & SLT); 2004-2005 GMC Envoy XUV (SLE & SLT) 2002-2004 Oldsmobile Bravada Base Download Installation InstructionsDiscover more performance solutions in our Air Intake Systems collection.

Gain a guaranteed increase in horsepower and torque with a K&N cold air intake system featuring a mandrel-bent aluminum intake tube. Each system is paired with a washable, reusable High-Flow Air Filter featuring oiled cotton filter media. The oversized, conical filter design allows you to go up to 100,000 miles between filter services under normal highway driving conditions. A custom heat shield or air box helps protect intake air from the high temperature of your engine bay, and the entire system can typically be installed in less than 90 minutes. Some intakes are not legal for sale or use on any pollution controlled motor vehicle in California. See the product specifications for CARB status on each part for a specific vehicle.Installation InstructionsUser 1This Part Fits: Year Make Model Submodel 2002-2004 Ford Focus SVT

Enhance your engine's performance with our precision-engineered K&N intake kit designed for Ford Ranger, Mazda B3000, and V6 3.0L engines. Unlock improved horsepower and torque through enhanced airflow and advanced filtration, optimizing your vehicle's responsiveness and efficiency.Key Benefits• High-density polyethylene roto-molded tube boosts airflow for improved throttle response.• Washable, reusable high-flow air filter with oiled cotton media delivers consistent performance, lasting up to 100,000 miles.• Custom heat shield protects the intake air from engine bay heat for sustained power.• Quick, straightforward installation—upgrade your Ford Ranger intake or Mazda B3000 performance intake in under 60 minutes.Easy Installation and ComplianceThis kit includes all necessary hardware, so you can purchase a K&N intake kit with confidence and install it with minimal tools. Please note that some intakes may not be legal on vehicles subject to emissions regulations in California—refer to the product specifications for CARB status details.Vehicle FitmentSpecifically designed for 2002-2003 Ford Ranger models (Edge, XL, XLT) and Mazda B3000 variants (Base, DS, SE). For more performance-enhancing parts, visit our Air Intake Systems collection to explore additional upgrades.

Gain a guaranteed increase in horsepower and torque with a K&N cold air intake system featuring a mandrel-bent aluminum intake tube. Each system is paired with a washable, reusable High-Flow Air Filter featuring oiled cotton filter media. The oversized, conical filter design allows you to go up to 100,000 miles between filter services under normal highway driving conditions. A custom heat shield or air box helps protect intake air from the high temperature of your engine bay, and the entire system can typically be installed in less than 90 minutes. Some intakes are not legal for sale or use on any pollution controlled motor vehicle in California. See the product specifications for CARB status on each part for a specific vehicle.Installation InstructionsUser 1This Part Fits: Year Make Model Submodel 2002-2005 Chevrolet Trailblazer LS 2002-2005 Chevrolet Trailblazer LT 2002-2003 Chevrolet Trailblazer LTZ 2002-2004 Chevrolet Trailblazer North Face 2003-2005 Chevrolet Trailblazer EXT LS 2002-2005 Chevrolet Trailblazer EXT LT 2002-2004 Chevrolet Trailblazer EXT North Face 2002-2005 GMC Envoy SLE 2002-2005 GMC Envoy SLT 2002-2005 GMC Envoy XL SLE 2002-2005 GMC Envoy XL SLT 2004-2005 GMC Envoy XUV SLE 2004-2005 GMC Envoy XUV SLT 2002-2004 Oldsmobile Bravada Base

The K&N 69-6540TB Typhoon air intake system is a free-flowing, mandrel-bent aluminum tube air induction system designed to fit some Mitsubishi Lancer models. The restrictive factory air filter and air intake housing are replaced by the K&N Typhoon air intake which is designed to dramatically reduce air flow restriction as it smoothes and straightens air flow. This allows your engine to inhale a larger amount of air than the factory air intake. More air means more usable power and acceleration throughout the engine's RPM range. The 69-6540TB air intake comes with a black rubber topped K&N high-flow air filter that installs into the previous air box space. Air is directed through the intake tube into the engine's throttle body for a guaranteed power gain. The intake tube has an attractive blue powder-coat finish that's made to last and it accommodates the factory mass air sensor and a replacement silicone crank case vent hose. The oversized cone shaped air filter can be used for up to 100,000 miles before servicing is needed depending on driving conditions. This air intake is relatively easy to install usually in 90 minutes or less using existing factory mounting points. Some Typhoon air intakes are not legal for sale or use in California and other states adopting California emission standards while others are CARB exempt and 50 state legal. Check the vehicle applications and specific CARB status for each vehicle and air intake.Installation InstructionsUser 1This Part Fits: Year Make Model Submodel 2002-2006 Mitsubishi Lancer ES 2003-2006 Mitsubishi Lancer Evolution 2005-2006 Mitsubishi Lancer Evolution MR 2005-2006 Mitsubishi Lancer Evolution RS 2006 Mitsubishi Lancer Evolution SE 2002-2004 Mitsubishi Lancer LS 2002-2006 Mitsubishi Lancer OZ Rally 2005 Mitsubishi Lancer Ralliart 2006 Mitsubishi Lancer SE

The K&N 69-2020TR Typhoon air intake system is a free-flowing, mandrel-bent aluminum tube air induction system designed to fit some Mini Cooper and Mini One models. The restrictive factory air filter and air intake housing are replaced by the K&N Typhoon air intake which is designed to dramatically reduce air flow restriction as it smoothes and straightens air flow. This allows your engine to inhale a larger amount of air than the factory air intake. More air means more usable power and acceleration throughout the engine's RPM range. The 69-2020TR air intake comes with a K&N high-flow air filter that installs into the previous air box space. Air is directed through the intake tube into the engine's throttle body for a guaranteed power gain. The intake tube has an attractive red powder-coat finish that's made to last and it accommodates a replacement silicone crank case vent hose. The oversized cone shaped air filter can be used for up to 100,000 miles before servicing is needed depending on driving conditions. This air intake is relatively easy to install usually in 90 minutes or less using existing factory mounting points requiring commonly available tools to do the job. Some Typhoon air intakes are not legal for sale or use in California and other states adopting California emission standards while others are CARB exempt and 50 state legal. Check the K&N catalog or website for vehicle applications and specific CARB status for each vehicle and air intake.Installation InstructionsUser 1Installation InstructionsThis Part Fits: Year Make Model Submodel 2002-2006 Mini Cooper Base 2002-2006 Mini Cooper S

Gain a guaranteed increase in horsepower and torque with a K&N cold air intake system featuring a mandrel-bent aluminum intake tube. Each system is paired with a washable, reusable High-Flow Air Filter featuring oiled cotton filter media. The oversized, conical filter design allows you to go up to 100,000 miles between filter services under normal highway driving conditions. A custom heat shield or air box helps protect intake air from the high temperature of your engine bay, and the entire system can typically be installed in less than 90 minutes. Some intakes are not legal for sale or use on any pollution controlled motor vehicle in California. See the product specifications for CARB status on each part for a specific vehicle.Installation InstructionsUser 1Installation InstructionsThis Part Fits: Year Make Model Submodel 2003 Mini Cooper Base 2002-2007 Mini Cooper S

Experience a noticeable boost in performance with this high-quality aftermarket intake system designed specifically for your Dodge Ram 1500. Engineered as a K&N intake for the Dodge Ram 1500 and Dodge Ram 1500 V6 3.7 L performance intake, this system optimizes airflow to deliver increased horsepower, torque, and throttle response for both daily driving and performance use.Key Benefits High-density polyethylene (HDPE) rotationally molded tube engineered for optimal airflow and enhanced engine performance. Washable, reusable High-Flow Air Filter featuring oiled cotton media, allowing up to 100,000 miles between filter services under normal highway conditions. Custom heat shield that protects the intake air from excessive engine bay heat. Quick and easy installation—typically completed in less than 60 minutes—making it an ideal performance upgrade for the Dodge Ram 1500. Specifically designed to fit popular Dodge Ram 1500 models, including Laramie, SLT, ST, and SXT. Installation & Performance OverviewThis aftermarket intake is crafted for both enthusiasts and professional drivers seeking a performance edge. Detailed installation instructions ensure a hassle-free setup. Explore our full range of air intake systems on our Air Intake Systems collection page for additional options and expert guidance.Legal & Fitment InformationPlease note that some intakes may not be legal for sale or use on vehicles with pollution controls in states like California. For CARB status and complete fitment details, consult the product specifications provided. Enjoy upgraded performance and reliability engineered to meet your specific Dodge Ram 1500 needs.

Experience a boost in engine performance and efficiency with our premium HDPE-based cold air intake system, engineered to unlock extra horsepower and torque on your Dodge Ram V8-4.7L intake kit. This cutting-edge system optimizes airflow, improves acceleration, and delivers a noticeable performance improvement that every truck enthusiast will appreciate.Key Benefits• HDPE Rotationally-Molded Tube: Maximizes engine airflow for superior performance.• High-Flow Air Filter: Washable and reusable with oiled cotton media for sustained efficiency.• Extended Filter Life: Oversized, conical design allows up to 100,000 miles between routine services.• Custom Heat Shield: Protects intake air from engine bay heat, ensuring optimal performance.• Quick Installation: Most setups can be completed in under 60 minutes, getting you back on the road fast.Installation & ComplianceThis intake kit includes detailed installation guides to ensure an easy setup. Please review the following for more details: Installation Instructions and User Guide. Note: Some intakes may not be legal on pollution-controlled vehicles in California. Always verify CARB status for your specific vehicle.Vehicle CompatibilityThis performance intake kit fits a variety of Dodge Ram 1500 models including:• Laramie, SLT, ST, SXT, TRX, TRX4 (2002–2010 and 2003–2010 variants)• Big Horn, Outdoorsman, and Tradesman trims (2011–2012)Ready to elevate your truck’s performance? Explore our Air Intake Systems collection and Shop Ram 1500 Parts now.

Gain a guaranteed increase in horsepower and torque with a K&N cold air intake system featuring a mandrel-bent aluminum intake tube. Each system is paired with a washable, reusable High-Flow Air Filter featuring oiled cotton filter media. The oversized, conical filter design allows you to go up to 100,000 miles between filter services under normal highway driving conditions. A custom heat shield or air box helps protect intake air from the high temperature of your engine bay, and the entire system can typically be installed in less than 90 minutes. Some intakes are not legal for sale or use on any pollution controlled motor vehicle in California. See the product specifications for CARB status on each part for a specific vehicle.User 1Installation InstructionsThis Part Fits: Year Make Model Submodel 2007 Subaru Impreza 2.5i 2007 Subaru Impreza Outback Sport 2002-2007 Subaru Impreza WRX 2006-2007 Subaru Impreza WRX Limited 2004-2007 Subaru Impreza WRX STI 2007 Subaru Impreza WRX STI Limited 2006-2007 Subaru Impreza WRX TR

Gain a guaranteed increase in horsepower and torque with a K&N cold air intake system featuring a mandrel-bent aluminum intake tube. Each system is paired with a washable, reusable High-Flow Air Filter featuring oiled cotton filter media. The oversized, conical filter design allows you to go up to 100,000 miles between filter services under normal highway driving conditions. A custom heat shield or air box helps protect intake air from the high temperature of your engine bay, and the entire system can typically be installed in less than 90 minutes. Some intakes are not legal for sale or use on any pollution controlled motor vehicle in California. See the product specifications for CARB status on each part for a specific vehicle.User 1Installation InstructionsThis Part Fits: Year Make Model Submodel 2007 Subaru Impreza 2.5i 2007 Subaru Impreza Outback Sport 2002-2007 Subaru Impreza WRX 2006-2007 Subaru Impreza WRX Limited 2004-2007 Subaru Impreza WRX STI 2007 Subaru Impreza WRX STI Limited 2006-2007 Subaru Impreza WRX TR

Gain a guaranteed increase in horsepower and torque with a K&N cold air intake system featuring a mandrel-bent aluminum intake tube. Each system is paired with a washable, reusable High-Flow Air Filter featuring oiled cotton filter media. The oversized, conical filter design allows you to go up to 100,000 miles between filter services under normal highway driving conditions. A custom heat shield or air box helps protect intake air from the high temperature of your engine bay, and the entire system can typically be installed in less than 90 minutes. Some intakes are not legal for sale or use on any pollution controlled motor vehicle in California. See the product specifications for CARB status on each part for a specific vehicle.Installation InstructionsUser 1This Part Fits: Year Make Model Submodel 2003-2004,2006-2007 Dodge Ram 1500 Laramie 2002-2010 Dodge Ram 1500 SLT 2002-2010 Dodge Ram 1500 ST 2008 Dodge Ram 1500 SXT 2009-2010 Dodge Ram 1500 TRX 2006-2007,2009-2010 Dodge Ram 1500 TRX4 2011 Ram 1500 Big Horn 2011-2012 Ram 1500 Outdoorsman 2011-2012 Ram 1500 SLT 2011-2012 Ram 1500 ST 2012 Ram 1500 Tradesman

The K&N 69-5300TS Typhoon cold-air intake system is a free-flowing, mandrel-bent aluminum tube air induction system designed to fit some Hyundai Tiberon GT and Coupe models. The restrictive factory air filter and air intake housing are replaced by the K&N Typhoon cold-air intake which is designed to pull in outside air and dramatically reduce air flow restriction by smoothing and straightening air flow. This allows your engine to inhale a larger amount of air than the factory air intake. More air means more usable power and acceleration throughout the engine's RPM range. The 69-5300TS cold-air intake consists of a black rubber topped K&N high-flow air filter that mounts near the driver side wheel well directing outside air through free-flowing aluminum tubing into a short ram induction tube that delivers high volumes of clean air into the engine's throttle body for a guaranteed power gain. The oversized cone shaped air filter comes with a water repellent DryCharger filter wrap to protect the filter from moisture. The air filter can be used for up to 100,000 miles before servicing is needed depending on driving conditions. This cold air intake is relatively easy to install usually in 90 minutes or less. Some Typhoon air intakes are not legal for sale or use in California and other states adopting California emission standards while others are CARB exempt and 50 state legal. Check the vehicle applications and specific CARB status for each vehicle and air intake.Installation InstructionsThis Part Fits: Year Make Model Submodel 2003-2005 Hyundai Tiburon GT

The K&N 69-8600TR Typhoon air intake system is a free-flowing, mandrel-bent aluminum tube air induction system designed to fit some Toyota Corolla, Toyota Matrix XR and Pontiac Vibe models. The restrictive factory air filter and air intake housing are replaced by the K&N Typhoon air intake which is designed to dramatically reduce air flow restriction as it smoothes and straightens air flow. This allows your engine to inhale a larger amount of air than the factory air intake. More air means more usable power and acceleration throughout the engine's RPM range. The 69-8600TR air intake comes with a black rubber topped K&N high-flow air filter that installs into the previous air box space. Air is directed through the intake tube into the engine's throttle body for a guaranteed power gain. The oversized cone shaped air filter can be used for up to 100,000 miles before servicing is needed depending on driving conditions. This air intake is relatively easy to install usually in 90 minutes or less using existing factory mounting points. The tools needed are a screwdriver, pliers, ratchet set and an Allen wrench. Some Typhoon air intakes are not legal for sale or use in California and other states adopting California emission standards while others are CARB exempt and 50 state legal. Check the K&N catalog or website for vehicle applications and specific CARB status for each vehicle and air intake.Installation InstructionsUser 1This Part Fits: Year Make Model Submodel 2003-2004 Pontiac Vibe Base 2003-2004 Pontiac Vibe GT 2002-2004 Toyota Corolla CE 2002-2004 Toyota Corolla LE 2002-2004 Toyota Corolla S 2003-2004 Toyota Matrix XR

Enhance your vehicle’s performance with our top-quality intake system, engineered to deliver noticeable horsepower and torque improvements. Designed for the 2003-2004 Cadillac CTS with a 3.2L V6 engine, this system uses advanced materials and engineering techniques to increase engine airflow, all while being dependable enough for everyday driving.Key Benefits• Built with a high-density polyethylene (HDPE) rotationally molded tube to maximize airflow efficiency• Comes with a washable, reusable high-flow air filter featuring oiled cotton media and an oversized conical design that extends filter service intervals up to 100,000 miles• Includes a custom heat shield to protect against high temperatures in the engine bay• Typically installs in less than 60 minutes, minimizing downtime• Delivers noticeable power enhancements compared to the factory systemCompatibility & InstallationThis intake system is specifically designed for the 2003-2004 Cadillac CTS models—including Base, Luxury, and Luxury Sport trims—ensuring a precise fit and a performance upgrade you can trust.Legal & Warranty Information• Not approved for sale or use on pollution-controlled motor vehicles in California – please review product specifications for CARB compliance• Backed by the manufacturer’s limited warranty for additional peace of mindFor more performance enhancements, check out our Air Intake Systems collection. Enjoy the ideal combination of power, durability, and ease of installation with our expertly engineered intake system.

Enhance your vehicle’s performance with this high-performance intake kit designed for the 2003-2004 Chevrolet Trailblazer V8-5.3L and GMC Envoy V8-5.3L. Built to increase horsepower and torque, the kit features a durable high-density polyethylene (HDPE) tube that maximizes airflow and a washable, reusable high-flow air filter with oiled cotton media that lasts up to 100,000 miles.Key Benefits Proven horsepower and torque enhancements* Advanced HDPE intake tube for improved airflow Washable, reusable filter with oiled cotton media engineered for extended life Fast installation in under 60 minutes using standard hand tools Custom heat shield design that blocks engine bay heat from affecting intake performance Legal note: Not intended for use on pollution-controlled vehicles in California; refer to CARB status in product specifications *Actual performance improvements may vary based on vehicle condition and usage.Easy InstallationInstallation is simple and efficient. Typically completed in under 60 minutes, this kit includes detailed instructions to guide you through the process. For step-by-step directions, please refer to our Installation Instructions.Fitment DetailsThis intake kit is specifically engineered for: Year Make Model Submodel 2003-2004 Chevrolet Trailblazer EXT LS 2003-2004 Chevrolet Trailblazer EXT LT 2003-2004 Chevrolet Trailblazer EXT North Face 2003-2004 GMC Envoy XL SLE 2003-2004 GMC Envoy XL SLT 2004 GMC Envoy XUV SLE 2004 GMC Envoy XUV SLT Experience the difference with the K&N Performance Intake Kit—crafted to meet the demands of Jeep, truck, and 4WD enthusiasts. Explore more high-performance components in our Air Intake Systems collection.*Note: Some specifications are subject to change based on testing and vehicle conditions.

Gain a guaranteed increase in horsepower and torque with a K&N cold air intake system featuring a mandrel-bent aluminum intake tube. Each system is paired with a washable, reusable High-Flow Air Filter featuring oiled cotton filter media. The oversized, conical filter design allows you to go up to 100,000 miles between filter services under normal highway driving conditions. A custom heat shield or air box helps protect intake air from the high temperature of your engine bay, and the entire system can typically be installed in less than 90 minutes. Some intakes are not legal for sale or use on any pollution controlled motor vehicle in California. See the product specifications for CARB status on each part for a specific vehicle.Installation InstructionsUser 1This Part Fits: Year Make Model Submodel 2003-2005 Mitsubishi Lancer ES 2003-2005 Mitsubishi Lancer Evolution 2005 Mitsubishi Lancer Evolution MR 2005 Mitsubishi Lancer Evolution RS 2003-2004 Mitsubishi Lancer LS 2003-2005 Mitsubishi Lancer OZ Rally

Gain a guaranteed increase in horsepower and torque with a K&N cold air intake system featuring a mandrel-bent aluminum intake tube. Each system is paired with a washable, reusable High-Flow Air Filter featuring oiled cotton filter media. The oversized, conical filter design allows you to go up to 100,000 miles between filter services under normal highway driving conditions. A custom heat shield or air box helps protect intake air from the high temperature of your engine bay, and the entire system can typically be installed in less than 90 minutes. Some intakes are not legal for sale or use on any pollution controlled motor vehicle in California. See the product specifications for CARB status on each part for a specific vehicle.Installation InstructionsUser 1This Part Fits: Year Make Model Submodel 2003-2005 Mitsubishi Lancer ES 2003-2005 Mitsubishi Lancer Evolution 2005 Mitsubishi Lancer Evolution MR 2005 Mitsubishi Lancer Evolution RS 2003-2004 Mitsubishi Lancer LS 2003-2005 Mitsubishi Lancer OZ Rally

Boost your Ford Crown Victoria V8–4.6L’s performance with our high-efficiency intake kit, designed to improve engine airflow, horsepower, and torque. Constructed with a durable, HDPE rotationally molded tube and paired with a washable, reusable high-flow air filter featuring oiled cotton media, this system provides reliable performance while keeping maintenance low. The specially engineered oversized conical design allows for up to 100,000 miles between filter services under normal highway conditions.Key Advantages• Guaranteed increase in horsepower and torque• Washable, reusable high-flow air filter with oiled cotton media• Oversized conical design with extended service intervals up to 100,000 miles• Custom heat shield protects intake air from engine bay heat• Quick, tool-friendly installation in less than 60 minutesTechnical & Legal DetailsMade from high-density polyethylene, this system is built for durability and efficiency. Please note that some intakes may not be legally sold or used on pollution-controlled vehicles in California. Always refer to the product specifications for CARB status and specific vehicle compliance details. This performance intake kit is an excellent choice for any enthusiast looking to upgrade their Ford Crown Victoria V8–4.6L engine setup.For a smooth installation process, refer to the following resources:Installation Instructions | User ManualExplore our Air Intake Systems collection for more performance-enhancing solutions.Compatibility Year Make Model Submodel 2003 Ford Crown Victoria Base 2003 Ford Crown Victoria LWB 2003 Ford Crown Victoria LX 2003 Ford Crown Victoria Police Interceptor 2003 Ford Crown Victoria S

Experience the ultimate performance boost with the K&N 03-04 Ford Expedition Performance Intake Kit. Designed to improve airflow and enhance engine power, this Ford Expedition performance intake system is a top choice for enthusiasts looking to upgrade their V8 engines with high-quality components. Its innovative design ensures your vehicle delivers improved throttle response and increased horsepower, making it a must-have for those who demand both quality and efficiency.Key Features High-density HDPE rotationally molded tube that maximizes airflow Washable, reusable high-flow air filter with oiled cotton media for enhanced performance Oversized conical design allowing up to 100,000 miles between filter services under normal highway conditions Custom heat shield that protects intake air from engine bay heat Easy installation process taking less than 60 minutes for a quick upgrade Estimated performance gain of up to 10-15 HP* when paired with the proper components Technical Specifications & Fitment Material: Durable high-density polyethylene (HDPE) Fitment: Specifically engineered for 2003-2004 Ford Expedition models including Eddie Bauer, NBX, XLS, XLT, and XLT Sport Legal Note: Some intakes may not be legal for sale or use on any pollution-controlled motor vehicle in California. Refer to product specifications for CARB compliance details. For detailed guidance, please use the following resources: Installation Instructions – Download PDF User Manual – Download PDF Explore more performance parts in our Cold Air Intakes collection to complete your upgrade.*Actual performance gains may vary based on application and vehicle setup.

Experience a significant boost in performance with the K&N Performance Intake Kit designed specifically for your 2003-2004 Ford Mustang Mach 1 V8-4.6L DOHC. This kit guarantees increased horsepower and torque by optimizing engine airflow, helping you unlock the full potential of your Mustang’s powerful engine.Key Features HDPE rotationally molded tube construction for superior durability Washable, reusable High-Flow Air Filter with oiled cotton media Extended filter life – service up to 100,000 miles under normal highway conditions Custom heat shield that safeguards against high engine bay temperatures Quick, DIY installation typically completed in less than 60 minutes CA-compliance disclaimer: Some intakes may not be legal for use on pollution-controlled vehicles in California Fitment & Compatibility Year Make Model Submodel 2003-2004 Ford Mustang Mach 1 Installation & WarrantyInstallation is straightforward with clear, step-by-step instructions, making it hassle-free for both beginners and seasoned enthusiasts. Enjoy peace of mind backed by Everything Truck Parts’ commitment to quality and exceptional customer support. Be sure to review the product specifications for warranty details and emission compliance.For more premium air intake systems, check out our Air Intake Systems collection or explore our range of K&N Engineering products.

Experience a substantial boost in performance with the K&N 57-2545 FIPK Air Intake System, designed exclusively for 2003–2004 Ford Mustang SVT Cobra models. This advanced system replaces the restrictive factory air filter and intake housing, ensuring smoother airflow for improved engine breathing and consistent power gains throughout the RPM range.Key Features Significantly increases airflow by smoothing and straightening incoming air Includes a chrome-capped high-flow air filter and a precision-engineered heat shield Maintains compatibility with the factory mass air sensor and crankcase vent hose Designed to last for up to 100,000 miles under proper driving conditions Street legal in all 50 US states and supported by K&N’s Million Mile Limited Warranty Easy installation, typically taking 90 minutes or less with standard tools Specifications Optimized to replace the factory air intake system, enhancing throttle response and acceleration Designed to deliver greater horsepower and torque by allowing more air into your engine Engineered for durability and longevity, ensuring minimal maintenance over extended use Precisely fits to maintain factory sensor functionality while upgrading performance Fitment DetailsThis air intake system fits seamlessly on 2003–2004 Ford Mustang SVT Cobra models, including the SVT Cobra 10th Anniversary edition. For additional performance upgrades, explore our Air Intake Systems collection.Upgrade your ride with confidence, knowing this product is engineered for quality, performance, and long-lasting reliability.

Boost your engine's performance with a high-density, HDPE rotationally molded air intake system designed for the Ford Thunderbird. This upgrade has been dyno-tested to provide noticeable increases in horsepower, faster throttle response, and a more aggressive engine sound. It replaces your factory air box, delivering a proven performance boost.Key Features Dyno-tested for increased airflow to enhance horsepower and torque Durable HDPE molded tube engineered for aggressive performance Washable, reusable high-flow air filter with oiled cotton media—up to 100,000 miles between services Custom heat shield that protects intake air from high engine bay temperatures Quick installation in less than 60 minutes for a hassle-free upgrade Direct replacement for the factory air box with proven results For detailed installation instructions, please refer to our Air Intake Systems collection. Note that this product may not be legal for use on pollution-controlled vehicles in California or other emission states—always check CARB compliance before purchase.Vehicle Fitment 2005 Ford Thunderbird – 50th Anniversary Edition 2003-2005 Ford Thunderbird – Base Edition 2003 Ford Thunderbird – James Bond Edition 2004 Ford Thunderbird – Pacific Coast Roadster

Experience a significant boost in your engine's performance with this advanced performance intake kit designed for Lincoln Navigator enthusiasts and truck owners looking for a real upgrade. Constructed with a high-density polyethylene (HDPE) rotationally molded tube and a washable, reusable High-Flow Air Filter featuring oiled cotton media, this system is built to enhance throttle response, improve engine sound, and increase horsepower and torque—potentially adding up to 11 HP at 4600 RPM and an increase of 14 lb-ft in torque.Key Benefits• Enhanced engine performance and smoother throttle response• Extended maintenance intervals with an oversized, conical filter design that lasts up to 100,000 miles under normal highway conditions• Quick and uncomplicated installation in less than 60 minutes using common tools• Custom heat shield formulated to protect intake air from high engine bay temperatures• Supported by a No-Hassle Lifetime Limited Warranty for your peace of mind• Please note: This intake kit may not be legal for use on pollution-controlled motor vehicles in California. Check the CARB status in the product specifications for applicable vehicles.Technical Specifications• Material: HDPE rotationally molded tube• Filter: Washable, reusable High-Flow Air Filter with oiled cotton media• Design: Conical intake system with custom heat shield• Service Interval: Up to 100,000 miles between filter maintenance Year Make Model Submodel 2003-2004 Lincoln Navigator Base Discover more performance solutions in our Air Intake Systems collection.

Enhance your Mercury Marauder’s performance with the K&N 03-04 Mercury Marauder V8 intake kit. Designed to increase horsepower and torque, this performance intake kit is built for enthusiasts seeking dependable, high-performance upgrades for their vehicle.Key Benefits• Made from durable, rotationally molded high-density polyethylene to maximize airflow.• Includes a washable high-flow air filter with oiled cotton media for consistent performance.• Features an oversized, conical design that supports up to 100,000 miles between filter services under normal highway conditions.• Equipped with a custom heat shield to protect intake air from engine bay heat.• Typically installs in less than 60 minutes for a quick upgrade.• Note: Some intakes may not be legal for use on pollution-controlled vehicles in states like California; please check your local regulations.For detailed instructions, please review our Installation Instructions.Fitment Year Make Model Submodel 2003-2004 Mercury Marauder Base Explore additional performance parts in our Air Intake Systems collection.

A high-density polyethylene (HDPE) rotationally-molded tube helps increase the volume of airflow to your engine, and provides a guaranteed increase in horsepower and torque. These systems are paired with a washable, reusable High-Flow Air Filter featuring oiled cotton filter media. The oversized, conical design allows you to go up to 100,000 miles between filter services under normal highway driving conditions. A custom heat shield helps protect intake air from the high temperature of your engine bay, and the entire system can typically be installed in less than 60 minutes. Some intakes are not legal for sale or use on any pollution controlled motor vehicle in California. See the product specifications for CARB status on each part for a specific vehicle.Installation InstructionsUser 1This Part Fits: Year Make Model Submodel 2003-2004 Lexus GX470 Base 2003-2004 Toyota 4Runner Limited 2003-2004 Toyota 4Runner Sport 2003-2004 Toyota 4Runner SR5

This premium air intake system is designed for top performance by significantly increasing the airflow to your engine. The innovative HDPE rotationally molded tube design ensures impressive gains in horsepower and torque, making it the ideal upgrade for your truck or Jeep.Key Benefits• Enhanced engine efficiency and quicker throttle response• Proven increases in horsepower and torque• High-density polyethylene (HDPE) tube optimized for maximum airflow• Washable, reusable high-flow air filter with oiled cotton media• Custom heat shield to keep intake air cool from engine heat• Quick and easy installation in under 60 minutesVehicle Compatibility• Compatible with select 2003-2004 Toyota Tundra models, including Limited and SR5 trims for dependable performance on the road.Installation & Legal InformationInstallation is simple with clear instructions provided in the resources below. Please note, this product is not approved for use on pollution-controlled vehicles in California. Always check the specific CARB status in the product specifications.Installation & Documentation• Installation Instructions• User ManualExplore more performance solutions in our Air Intake Systems collection.

Upgrade your performance with the K&N 03-05 Neon SRT-4 FIPK Short Ram Intake. Engineered to maximize airflow and deliver a noticeable boost in horsepower and torque, this SRT-4 Performance Intake enhances your engine’s efficiency and drivability.Key Benefits• High-density polyethylene (HDPE) rotational-molded tube that increases airflow and power• Washable, reusable high-flow air filter with oiled cotton media delivering up to 100,000 miles of service under normal highway conditions• Custom heat shield that safeguards intake air from engine bay heat• Quick and straightforward installation – typically completed in 60 minutes or lessInstallation & FitInstallation is simple with the following guides:• Installation Instructions• User ManualThis K&N Intake for the 03-05 Neon is specifically designed for Dodge Neon SRT-4 models from 2003 to 2005: Year Make Model Submodel 2003-2005 Dodge Neon SRT-4 Please note: Some intakes may not be legal for use on pollution-controlled vehicles in California. Check the CARB status for your vehicle before installation.Upgrade your ride today – experience the performance and reliability of a true K&N Short Ram Intake and explore more options in our Air Intake Systems collection.

Experience a noticeable boost in your Nissan 350Z’s performance with the K&N 350Z intake kit designed to maximize airflow and enhance engine output. This performance intake not only delivers increased horsepower and torque but also offers reliable operation and long service intervals for dedicated drivers and serious performance enthusiasts.Key Features & Benefits HDPE rotationally molded tube engineered to increase airflow and engine efficiency Washable, reusable High-Flow Air Filter featuring robust oiled cotton media Proven boost in horsepower and torque for improved driving dynamics Up to 100,000 miles between filter maintenance under typical highway conditions Easy Installation & Smart Design Quick and simple installation—typically under 60 minutes Custom heat shield effectively protects intake air from extreme engine bay temperatures CARB status details provided in product specifications ensure legal compliance where applicable Fitment DetailsThis performance intake kit is custom-tailored for various Nissan 350Z models, including special editions such as the 35th Anniversary Edition, as well as Base, Enthusiast, Grand Touring, Performance, Touring, and Track trims from model years 2003 to 2006. For a detailed overview of compatible models and trim levels, please review the provided specifications.Discover more high-performance air intake systems in our Air Intake Systems collection and elevate your Nissan 350Z experience today.

Enhance your Dodge Viper's performance with a high-density intake system designed to boost airflow and improve engine efficiency. Developed for enthusiasts who demand quality, this system not only increases horsepower and torque but also delivers sharper throttle response and cooler air intake for sustained performance.Key Features Constructed from HDPE rotationally molded tubing for superior airflow. Washable, reusable high-flow air filter featuring oiled cotton media. Extended service interval for the filter—up to 100,000 miles under normal highway conditions. Custom-designed heat shield that protects intake air from elevated engine bay temperatures. Engineered for quick installation, usually completed in less than 60 minutes using basic automotive tools. Installation & Legal NotesInstallation is straightforward: Position the system correctly. Secure all components, ensuring that all fittings are tight. Verify that the custom heat shield is properly aligned for optimal performance. Please note that some intakes may not be legal for sale or use on pollution-controlled vehicles in California. Always refer to the product specifications for CARB status to ensure compliance with local regulations.Fitment Year Make Model Submodel 2003-2006 Dodge Viper SRT-10 Discover how our performance intake—ideal for those looking to purchase a K&N intake for their Dodge Viper or upgrade their Dodge Viper performance intake—can transform your driving experience. For more innovative solutions, explore our Air Intake Systems collection.

The K&N 69-7080-1TS Typhoon cold-air intake system is a free-flowing, mandrel-bent aluminum tube air induction system designed to fit some Infiniti G35 models. The restrictive factory air filter and air intake housing are replaced by the K&N Typhoon cold-air intake which is designed to pull in relatively cooler air and dramatically reduce air flow restriction by smoothing and straightening air flow. This allows your engine to inhale a larger amount of denser air than the factory air intake. More air means more usable power and acceleration throughout the engine's RPM range. The 69-7080-1TS cold-air intake consists of a K&N high-flow air filter that mounts behind the driver-side wheel well directing cooler outside air through free-flowing aluminum tubing into a short ram induction tube that delivers high volumes of clean, colder air into the engine's throttle body for a guaranteed power gain. The oversized cone shaped air filter comes with a water repellent DryCharger filter wrap to protect the filter from moisture. The air filter can be used for up to 100,000 miles before servicing is needed depending on driving conditions. This cold air intake is relatively easy to install usually in 90 minutes or less. Some Typhoon air intakes are not legal for sale or use in California and other states adopting California emission standards while others are CARB exempt and 50 state legal. Check the vehicle applications and specific CARB status for each vehicle and air intake.Installation InstructionsUser 1This Part Fits: Year Make Model Submodel 2003-2006 INFINITI G35 Base 2004-2006 INFINITI G35 X

The K&N 69-7081-1TS Typhoon air intake system is a free-flowing, mandrel-bent aluminum tube air induction system designed to fit some Infiniti G35 models. The restrictive factory air filter and air intake housing are replaced by the K&N Typhoon air intake which is designed to dramatically reduce air flow restriction as it smoothes and straightens air flow. This allows your engine to inhale a larger amount of air than the factory air intake. More air means more usable power and acceleration throughout the engine's RPM range. Air is directed through the intake tube into the engine's throttle body for a guaranteed power gain. The intake tube has an attractive silver powder-coat finish that's made to last and it accommodates the factory mass air sensor and crank case vent hose. The oversized cone shaped air filter can be used for up to 100,000 miles before servicing is needed depending on driving conditions. This air intake is relatively easy to install usually in 90 minutes or less using existing factory mounting points. The tools needed are a screwdriver, pliers, ratchet set and an Allen wrench. Some Typhoon air intakes are not legal for sale or use in California and other states adopting California emission standards while others are CARB exempt and 50 state legal. Check the K&N catalog or website for vehicle applications and specific CARB status for each vehicle and air intake.Installation InstructionsUser 1This Part Fits: Year Make Model Submodel 2003-2006 INFINITI G35 Base 2004-2006 INFINITI G35 X

Experience guaranteed performance gains with this advanced intake kit designed to boost horsepower and torque. Engineered as a K&N Dodge Ram 1500 intake kit and a Dodge Ram 2500 Hemi intake kit, it delivers improved throttle response and smoother engine performance. Featuring a high-density polyethylene tube and a reusable high-flow air filter, you can expect substantial improvements in airflow and overall engine efficiency.Key Features Enhanced airflow for noticeable increases in horsepower and torque High-density polyethylene construction for durability and reliability Washable, reusable high-flow air filter with oiled cotton media Custom heat shield to protect against engine bay temperatures Extended filter life for up to 100,000 highway miles Improved throttle response for superior driving dynamics Comes with a No-Hassle Lifetime Limited Warranty for peace of mind Technical & Installation Details Quick and easy installation in under 60 minutes Requires basic hand tools with clear installation instructions provided Constructed with precise materials to ensure optimal performance Please review CARB requirements; some intakes may not be legal for sale or use on pollution-controlled vehicles in California Vehicle Fitment Year Make Model Submodel 2003-2008 Dodge Ram 1500 Laramie 2003-2008 Dodge Ram 1500 SLT 2006-2007 Dodge Ram 1500 Sport 2003-2008 Dodge Ram 1500 ST 2008 Dodge Ram 1500 SXT 2006-2007 Dodge Ram 1500 TRX4 2003,2005-2008 Dodge Ram 2500 Laramie 2006-2008 Dodge Ram 2500 Power Wagon 2003-2008 Dodge Ram 2500 SLT 2006-2007 Dodge Ram 2500 Sport 2003-2008 Dodge Ram 2500 ST 2008 Dodge Ram 2500 SXT 2006-2007 Dodge Ram 2500 TRX4 2003-2008 Dodge Ram 3500 Laramie 2003-2008 Dodge Ram 3500 SLT 2006-2007 Dodge Ram 3500 Sport 2003-2008 Dodge Ram 3500 ST 2008 Dodge Ram 3500 SXT Explore more performance upgrades in our Air Intake Systems collection and take your driving experience to the next level.

Experience a significant boost in engine performance with this cutting-edge K&N performance intake kit designed for Dodge Ram 2500/3500 models and specifically engineered for the L6-5.9L engine. This high-performance system features a premium HDPE rotationally molded tube that delivers increased airflow, resulting in guaranteed improvements in horsepower, torque, and throttle response.Key Features & Benefits Premium HDPE intake tube enhances airflow to boost engine performance Washable, reusable high-flow air filter with oiled cotton filter media Oversized conical design supports up to 100,000 miles between services Custom heat shield protects intake air from high engine bay temperatures Improved engine sound and throttle response deliver an exhilarating drive Designed exclusively for Dodge Ram 2500 performance parts and Dodge Ram 3500 intake kit applications Installation & Warranty InformationInstallation is straightforward—most users complete the process in less than 60 minutes with standard tools. Please review the CARB status for legal compliance on pollution-controlled vehicles. Enjoy added peace of mind with our No-Hassle Lifetime Limited Warranty, ensuring lasting performance and reliability.Compatibility DetailsThis performance intake kit fits various Dodge Ram models: Years: 2003, 2005-2007 (and select 2007 models) Make: Dodge Models: Ram 2500 (Laramie, SLT, Sport, ST, TRX4) and Ram 3500 (Laramie, SLT, Sport, ST, TRX4) Explore our full range of quality options in our Air Intake Systems collection.