AEM Charge Pipes are a free-flowing, mandrel-bent aluminum tube charge pipe kit designed to replace the restrictive factory intercooler piping on specific turbo charged BMW models and offer a wide range of performance customization options. AEM charge pipes have been engineered to reduce turbo charged air pressure loss as well as dramatically increase air flow from the turbo through the intercooler. The charge pipes are constructed from lightweight aluminum with a durable gunmetal gray powder coated finish. For additional horsepower gains and improved engine compartment aesthetics, AEM offers a wide range of Cold Air Intake System that can be installed into your vehicle as well. The charge pipe kit is easy to install with commonly available tools and it is backed by AEM’s Lifetime Limited Warranty.Installation InstructionsThis Part Fits: Year Make Model Submodel 2016-2018 BMW 340i Base 2017-2019 BMW 340i GT xDrive Base 2016-2018 BMW 340i xDrive Base 2017-2019 BMW 440i Base 2017-2019 BMW 440i Gran Coupe Base 2017-2019 BMW 440i xDrive Base 2017-2019 BMW 440i xDrive Gran Coupe Base 2017-2019 BMW 540i Base 2017-2019 BMW 540i xDrive Base 2017 BMW 640i Base 2017,2019 BMW 640i Gran Coupe Base 2017 BMW 640i xDrive Base 2017 BMW 640i xDrive Gran Coupe Base 2018-2019 BMW 640i xDrive Gran Turismo Base 2016-2019 BMW 740i Base 2017-2019 BMW 740i xDrive Base 2017-2019 BMW M240i Base 2018-2019 BMW M240i xDrive Base

The AEM 21-820DS is an innovatively designed intake system to completely replace the restrictive air filter and airbox of some Infiniti QX30 models. The airbox has been crafted with premium materials and designed with 2 air scoops that feed from factory vent locations. It is aerodynamically engineered for better airflow, heat resistance, and improved aesthetics under the hood. The ECU is relocated underneath the airbox where a large vent keeps it cool. To clear the hood stand we incorporate a channel groove for a factory look on the air box. The AEM logo is showcased in a transparent badge, which also serves as a window to the filter so you know when it is time to have it serviced. The cylinder shaped AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). The air intake system is backed by AEM's Lifetime Limited Warranty. Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the 21-785DS vehicle applications to determine the legal status for each vehicle.Installation InstructionsTechnical DrawingThis Part Fits: Year Make Model Submodel 2017-2018 INFINITI QX30 Base 2019 INFINITI QX30 Essential 2019 INFINITI QX30 Luxe 2017-2018 INFINITI QX30 Luxury 2017-2018 INFINITI QX30 Premium 2019 INFINITI QX30 Pure 2017-2019 INFINITI QX30 Sport

This AEM Performance Cold Air Intake System produces horsepower and torque gains by replacing your vehicle's restrictive factory air filter and air intake housing. This air intake system was designed, tuned and dyno-tested to fit specific Chevrolet Malibu models. Air enters the system through an oversized AEM Dryflow synthetic washable air filter for outstanding air flow, filtration and performance. The air filter is placed into the original air box space and is protected by a heat shield which is designed to reduce intake air temperature and increase horsepower. The air intake tube is constructed from mandrel-bent aluminum featuring a durable gunmetal gray powder coated finish. This air intake system was developed to accommodate the engine's factory emissions control devices including the mass airflow sensor and PCV line. The tapered cylinder shaped AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). The air intake system is easy to install with commonly available tools and it is backed by AEM's Lifetime Limited Warranty. This air intake cannot be sold in California. It is not legal for use in California or other states adopting California emission standards.Installation InstructionsUser 1This Part Fits: Year Make Model Submodel 2016 Chevrolet Malibu LT 2016-2022 Chevrolet Malibu Premier 2016-2017 Volkswagen GTI Autobahn 2016-2017 Volkswagen GTI S 2016-2017 Volkswagen GTI SE 2017 Volkswagen GTI Sport

AEM Performance Cold Air Intake Systems produce horsepower and torque gains by replacing your vehicle's restrictive factory air filter and air intake housing. This air intake system was designed, tuned and dyno-tested to fit specific Chevrolet Cruze models. Air enters the system through an oversized AEM Dryflow synthetic washable air filter for outstanding air flow, filtration and performance. The air filter is located in the original air box space and is protected by a heat shield which is designed to reduce intake air temperature and increase horsepower. The air intake tubing is constructed from mandrel-bent aluminum featuring a durable gunmetal gray powder coated finish. This air intake system was developed to accommodate the engine's factory emissions control devices including the mass air sensor. The tapered cylinder shaped AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). This air intake system is easy to install with commonly available tools. Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the vehicle applications to determine the legal status for each vehicle.Installation InstructionsUser 1This Part Fits: Year Make Model Submodel 2016-2021 Chevrolet Malibu L 2016-2025 Chevrolet Malibu LS 2016-2025 Chevrolet Malibu LT 2019-2025 Chevrolet Malibu RS

This Performance Air Intake System allows your engine to breath more air compared to the restrictive factory air intake housing. It is designed, tuned, and dyno-tested to produce more horsepower and torque. The cone-shaped AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). A custom shaped heat shield with edge trim lining is included to keep engine bay heat from the air intake. The air intake tube is constructed from mandrel-bent aluminum featuring a durable gunmetal gray powder coated finish. This air intake system is backed by AEM's Lifetime Limited Warranty. Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the vehicle applications to determine the legal status for each vehicle.Installation InstructionsTechnical DrawingThis Part Fits: Year Make Model Submodel 2016-2018 Ford Focus RS

This Performance Air Intake System allows your engine to breathe more air compared to the restrictive factory air intake housing. It is designed, tuned and dyno-tested to produce more horsepower and torque. Air enters the system through an oversized AEM Dryflow synthetic washable air filter for outstanding air flow, filtration and performance. The air intake tube is constructed from mandrel-bent aluminum featuring a durable gunmetal gray powder coated finish. A custom shaped heat shield with lid is included. The tapered cylinder shaped AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). This Air Intake System is backed by AEM's Lifetime Limited Warranty. Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the vehicle applications to determine the legal status for each vehicle.Installation InstructionsUser 1This Part Fits: Year Make Model Submodel 2016-2018 BMW 340i Base 2017-2019 BMW 340i GT xDrive Base 2016-2018 BMW 340i xDrive Base 2017-2020 BMW 440i Base 2017-2020 BMW 440i Gran Coupe Base 2017-2020 BMW 440i xDrive Base 2017-2020 BMW 440i xDrive Gran Coupe Base

This Performance Air Intake System allows your engine to breath more air compared to the restrictive factory air intake housing. It is designed, tuned, and dyno-tested to produce more horsepower and torque. The cone-shaped AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). A custom shaped heat shield with edge trim lining is included to keep engine bay heat from the air intake. The air intake tube is constructed from mandrel-bent aluminum featuring a durable gunmetal gray powder coated finish. This air intake system is backed by AEM's Lifetime Limited Warranty. Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the vehicle applications to determine the legal status for each vehicle.Installation InstructionsUser 1This Part Fits: Year Make Model Submodel 2016-2024 Chevrolet Camaro SS

This Performance Air Intake System allows your engine to breath more air compared to the restrictive factory air intake housing. It is designed, tuned, and dyno-tested to produce more horsepower and torque. The cone-shaped AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). A custom shaped heat shield with edge trim lining is included to keep engine bay heat from the air intake. The air intake tube is constructed from mandrel-bent aluminum featuring a durable gunmetal gray powder coated finish. This air intake system is backed by AEM's Lifetime Limited Warranty. Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the vehicle applications to determine the legal status for each vehicle.User 1Installation InstructionsInstallation InstructionsThis Part Fits: Year Make Model Submodel 2018-2024 Subaru Crosstrek Base 2019-2023 Subaru Crosstrek Hybrid 2018-2020 Subaru Crosstrek Limited 2018-2024 Subaru Crosstrek Premium 2017-2024 Subaru Impreza Base 2017-2023 Subaru Impreza Limited 2017-2023 Subaru Impreza Premium 2017-2024 Subaru Impreza Sport

This Performance Air Intake System allows your engine to breath more air compared to the restrictive factory air intake housing. It is designed, tuned, and dyno-tested to produce more horsepower and torque. The cone-shaped AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). A custom shaped heat shield with edge trim lining is included to keep engine bay heat from the air intake. The air intake tube is constructed from mandrel-bent aluminum featuring a durable gunmetal gray powder coated finish. This air intake system is backed by AEM's Lifetime Limited Warranty. Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the vehicle applications to determine the legal status for each vehicle.Technical DrawingInstallation InstructionsThis Part Fits: Year Make Model Submodel 2021-2022,2024 Ford Expedition King Ranch 2021-2022,2024 Ford Expedition Limited 2021-2022,2024 Ford Expedition Max King Ranch 2021-2022,2024 Ford Expedition Max Limited 2021-2022,2024 Ford Expedition Max Platinum 2021-2022,2024 Ford Expedition Max SSV 2022 Ford Expedition Max XL 2021-2022,2024 Ford Expedition Max XLT 2021-2022,2024 Ford Expedition Platinum 2021-2022,2024 Ford Expedition SSV 2022,2024 Ford Expedition Timberline 2022 Ford Expedition XL 2024 Ford Expedition XL STX 2021-2022,2024 Ford Expedition XLT 2017-2024 Ford F-150 King Ranch 2017-2024 Ford F-150 Lariat 2017-2023 Ford F-150 Limited 2017-2024 Ford F-150 Platinum 2018-2024 Ford F-150 Police Responder 2017-2024 Ford F-150 Raptor 2017-2024 Ford F-150 SSV 2021-2024 Ford F-150 Tremor 2017-2024 Ford F-150 XL 2017-2024 Ford F-150 XLT

This Performance Air Intake System allows your engine to breath more air compared to the restrictive factory air intake housing. It is designed, tuned, and dyno-tested to produce more horsepower and torque. The cone-shaped AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). A custom shaped heat shield with edge trim lining is included to keep engine bay heat from the air intake. The air intake tube is constructed from mandrel-bent aluminum featuring a durable gunmetal gray powder coated finish. This air intake system is backed by AEM's Lifetime Limited Warranty. Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the vehicle applications to determine the legal status for each vehicle.Technical DrawingInstallation InstructionsThis Part Fits: Year Make Model Submodel 2017-2018 Kia Forte EX 2017-2018 Kia Forte LX 2017-2018 Kia Forte S 2017-2018 Kia Forte5 EX 2017-2018 Kia Forte5 LX

This Performance Air Intake System allows your engine to breathe more air compared to the restrictive factory air intake housing. It is designed, tuned and dyno-tested to produce more horsepower and torque. Air enters the system through an oversized AEM Dryflow synthetic washable air filter for outstanding air flow, filtration and performance. The air intake tube is constructed from mandrel-bent aluminum featuring a durable gunmetal gray powder coated finish. A custom shaped heat shield with lid is included. The tapered cylinder shaped AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). This Air Intake System is backed by AEM's Lifetime Limited Warranty. Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the vehicle applications to determine the legal status for each vehicle.Installation InstructionsUser 1This Part Fits: Year Make Model Submodel 2017-2019 Kia Soul + 2020-2021 Kia Soul EX 2020-2021 Kia Soul GT-Line 2020-2021 Kia Soul LX 2020-2021 Kia Soul S 2020-2021 Kia Soul X-Line

The AEM Performance Cold Air Intake System produces horsepower and torque gains by replacing your vehicle's restrictive factory air filter and air intake housing. This air intake system was designed, tuned and dyno-tested to fit specific models. Air enters the system through an oversized AEM Dryflow synthetic washable air filter for outstanding air flow, filtration and performance. The air filter is located in the original air box space and is protected by a heat shield which is designed to reduce intake air temperature and increase horsepower. The air intake tube is constructed from mandrel-bent aluminum featuring a durable gunmetal gray powder coated finish. This air intake system was developed to accommodate the engine's factory emissions control devices including the mass airflow sensor and breather tube. The tapered cylinder shaped AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). The air intake system is easy to install with commonly available tools and it is backed by AEM's Lifetime Limited Warranty. Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the vehicle applications to determine the legal status for each vehicle.Installation InstructionsUser 1This Part Fits: Year Make Model Submodel 2018-2019 Hyundai Elantra Limited 2018-2019 Hyundai Elantra SE 2018-2019 Hyundai Elantra SEL 2018-2019 Hyundai Elantra Value Edition

This Performance Air Intake System allows your engine to breathe more air compared to the restrictive factory air intake housing. It is designed, tuned and dyno-tested to produce more horsepower and torque. Air enters the system through an oversized AEM Dryflow synthetic washable air filter for outstanding air flow, filtration and performance. The air intake tube is constructed from mandrel-bent aluminum featuring a durable gunmetal gray powder coated finish. A custom shaped heat shield with lid is included. The tapered cylinder shaped AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). This Air Intake System is backed by AEM's Lifetime Limited Warranty. Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the vehicle applications to determine the legal status for each vehicle.Installation InstructionsUser 1This Part Fits: Year Make Model Submodel 2021-2024 Mazda 3 2.5 S 2019-2020 Mazda 3 Base 2022-2024 Mazda 3 Carbon Edition 2020-2024 Mazda 3 Preferred 2020-2024 Mazda 3 Premium 2020-2023 Mazda 3 Select 2024 Mazda 3 Select Sport

This Performance Air Intake System allows your engine to breathe more air compared to the restrictive factory air intake housing. It is designed, tuned and dyno-tested to produce more horsepower and torque. Air enters the system through an oversized AEM Dryflow synthetic washable air filter for outstanding air flow, filtration and performance. The air intake tube is constructed from mandrel-bent aluminum featuring a durable gunmetal gray powder coated finish. A custom shaped heat shield with lid is included. The tapered cylinder shaped AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). This Air Intake System is backed by AEM's Lifetime Limited Warranty. Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the vehicle applications to determine the legal status for each vehicle.Installation InstructionsUser 1This Part Fits: Year Make Model Submodel 2017-2021 BMW 230i Base 2017-2021 BMW 230i xDrive Base 2017-2021 BMW 330i Base 2017-2019 BMW 330i GT xDrive Base 2017-2020 BMW 330i xDrive Base 2017-2020 BMW 430i Base 2017-2020 BMW 430i Gran Coupe Base 2017-2020 BMW 430i xDrive Base 2017-2020 BMW 430i xDrive Gran Coupe Base

The AEM Performance Cold Air Intake System produces horsepower and torque gains by replacing your vehicle's restrictive factory air filter and air intake housing. This air intake system was designed, tuned and dyno-tested to fit specific models. Air enters the system through an oversized AEM Dryflow synthetic washable air filter for outstanding air flow, filtration and performance. The air filter is located in the original air box space and is protected by a heat shield which is designed to reduce intake air temperature and increase horsepower. The air intake tube is constructed from mandrel-bent aluminum featuring a durable gunmetal gray powder coated finish. This air intake system was developed to accommodate the engine's factory emissions control devices including the mass airflow sensor and breather tube. The tapered cylinder shaped AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). The air intake system is easy to install with commonly available tools and it is backed by AEM's Lifetime Limited Warranty. Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the vehicle applications to determine the legal status for each vehicle.Installation InstructionsUser 1This Part Fits: Year Make Model Submodel 2019 Nissan Altima Edition ONE 2019-2020 Nissan Altima Platinum 2019-2021 Nissan Altima SR

This Performance Air Intake System allows your engine to breathe more air compared to the restrictive factory air intake housing. It is designed, tuned and dyno-tested to produce more horsepower and torque. Air enters the system through an oversized AEM Dryflow synthetic washable air filter for outstanding air flow, filtration and performance. The air intake tube is constructed from mandrel-bent aluminum featuring a durable silver powder coated finish. A custom shaped heat shield with lid is included. The tapered cylinder shaped AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). This Air Intake System is backed by AEM's Lifetime Limited Warranty. Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the vehicle applications to determine the legal status for each vehicle.Installation InstructionsUser 1This Part Fits: Year Make Model Submodel 2019-2022 Nissan Altima Platinum 2019-2025 Nissan Altima S 2019-2025 Nissan Altima SL 2019-2025 Nissan Altima SR 2019-2025 Nissan Altima SV

AEM cold air intake systems are designed to increase horsepower and torque. The system includes an oversized AEM DRYFLOW synthetic washable air filter, engineered to provide outstanding airflow, filtration, and performance, and also features a mandrel-bent aluminum intake tube and high quality hardware. The oversized, conical filter design allows you to go up to 100,000 miles between filter services under normal highway driving conditions. A custom heat shield helps protect intake air from the high temperature of your engine bay, and the factory fresh air duct attaches to the heat shield. The entire system can typically be installed in less than 90 minutes. Some intakes are not legal for sale or use on any pollution controlled motor vehicle in California. See the product specifications for CARB status on each part for a specific vehicle.User 1Installation InstructionsThis Part Fits: Year Make Model Submodel 2019-2021 Subaru WRX STI Base 2019-2021 Subaru WRX STI Limited 2019 Subaru WRX STI S209

The AEM-26-3011C Charge Pipe is a free-flowing, mandrel-bent aluminum tube charge pipe kit designed to replace the restrictive factory intercooler piping on specific turbo charged Toyota Supra GR models and offer a wide range of performance customization options. AEM charge pipes have been engineered to reduce turbo charged air pressure loss as well as dramatically increase air flow from the turbo through the intercooler. The charge pipes are constructed from lightweight aluminum with a durable gunmetal gray powder coated finish. For additional horsepower gains and improved engine compartment aesthetics, please refer to our Cold Air Intake Systems. The charge pipe kit is easy to install with commonly available tools and it is backed by AEM’s Lifetime Limited Warranty.Installation InstructionsThis Part Fits: Year Make Model Submodel 2021-2024 BMW Z4 sDrive30i 2021-2024 Toyota GR Supra Base

The AEM-26-3005C Charge Pipe is a free-flowing, mandrel-bent aluminum tube charge pipe kit designed to replace the restrictive factory intercooler piping on specific turbo charged Toyota Supra GR models and offer a wide range of performance customization options. AEM charge pipes have been engineered to reduce turbo charged air pressure loss as well as dramatically increase air flow from the turbo through the intercooler. The charge pipes are constructed from lightweight aluminum with a durable gunmetal gray powder coated finish. For additional horsepower gains and improved engine compartment aesthetics, the AEM-21-875DS Cold Air Intake System can be installed into your vehicle as well. The charge pipe kit is easy to install with commonly available tools and it is backed by AEM’s Lifetime Limited Warranty.Installation InstructionsThis Part Fits: Year Make Model Submodel 2022-2024 BMW Z4 M40i 2020 BMW Z4 M40i First Edition 2020-2021 BMW Z4 sDrive M40i 2024 Toyota GR Supra 45th Anniversary Edition 2021-2022 Toyota GR Supra A91 Edition 2023 Toyota GR Supra A91-MT Edition 2020-2024 Toyota GR Supra Base 2020 Toyota GR Supra Launch Edition 2020-2024 Toyota GR Supra Premium

The AEM 21-466C Performance Cold Air Intake System produces horsepower and torque gains by replacing your vehicle's restrictive factory air filter and air intake housing. This air intake system was designed, tuned and dyno-tested to fit specific Toyota Matrix XRS models. Air enters the system through an oversized AEM Dryflow synthetic washable air filter for outstanding air flow, filtration and performance. The air filter is relocated to the driver-side wheel well which is designed to reduce intake air temperature and increase horsepower. The intake tubing is constructed from mandrel-bent aluminum featuring a durable gunmetal gray powder coated finish. This air intake system was developed to accommodate the engine's factory emissions control devices including the mass air flow sensor and vacuum lines. The tapered cylinder shaped AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). The air intake system is backed by AEM's Lifetime Limited Warranty. Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the 21-466C vehicle applications to determine the legal status for each vehicle.Installation InstructionsThis Part Fits: Year Make Model Submodel 2003 Toyota Matrix Base 2003 Toyota Matrix XR 2003 Toyota Matrix XRS

The AEM 22-516R Performance Short Ram Air Intake System has been engineered to be an affordable and easy way to boost the horsepower and torque of your engine. The restrictive factory air filter and air intake housing are replaced with this AEM air intake system which was designed, tuned and dyno-tested to fit specific Honda Civic SI models. Air enters the system through an oversized AEM Dryflow synthetic washable air filter for outstanding air flow, filtration and performance. The sound your engine makes when accelerating is also modified to a fuller, more aggressive resonance allowing you to hear and feel the horsepower upgrade. The intake tubing is constructed from mandrel-bent aluminum featuring a durable red powder coated finish. This air intake system was developed to accommodate the engine's factory emissions control devices including the mass air flow sensor, air injection line and engine breather line. The tapered cylinder shaped AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). The air intake system is easy to install with commonly available tools and it is backed by AEM's Lifetime Limited Warranty. Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the 22-516R vehicle applications to determine the legal status for each vehicle.Installation InstructionsUser 1This Part Fits: Year Make Model Submodel 2006-2007 Honda Civic Si

The AEM 21-641R Performance Cold Air Intake System produces horsepower and torque gains by replacing your vehicle's restrictive factory air filter and air intake housing. This air intake system was designed, tuned and dyno-tested to fit specific Mazda Mazdaspeed 6 models. Air enters the system through an oversized AEM Dryflow synthetic washable air filter for outstanding air flow, filtration and performance. The air filter is relocated to the driver-side wheel well which is designed to reduce intake air temperature and increase horsepower. The intake tubing is constructed from mandrel-bent aluminum featuring a durable red powder coated finish. This air intake system was developed to accommodate the engine's factory emissions control devices including the MAF and engine breather hose. The tapered cylinder shaped AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). The air intake system is backed by AEM's Lifetime Limited Warranty. Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the 21-641R vehicle applications to determine the legal status for each vehicle.Installation InstructionsThis Part Fits: Year Make Model Submodel 2006 Mazda 6 Mazdaspeed

The 21-821DS Performance Cold Air Intake System produces horsepower and torque gains by replacing the restrictive air filter and air intake housing. This air intake system was designed, tuned and dyno-tested to fit specific Nissan 370Z models. This system replaces both the left and right side intakes. The AEM Dryflow synthetic washable air filter does not require oiling and can be used up to 100,000 miles before servicing is needed (depending on driving conditions). The heatshield is a two piece design and also utilizes the factory air ducting. The intake tube is constructed from mandrel bent aluminum and has a durable gray powder coat finish. This air intake system was developed to accommodate the mass air flow sensor and PCV hose. The air intake system is backed by AEM's Lifetime Limited Warranty. Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the 21-821DS vehicle applications to determine the legal status for each vehicle.Installation InstructionsUser 1This Part Fits: Year Make Model Submodel 2010 Nissan 370Z 40th Anniversary Edition 2009-2020 Nissan 370Z Base 2018-2019 Nissan 370Z Heritage Edition 2009-2017,2019-2020 Nissan 370Z Nismo 2015-2018 Nissan 370Z Nismo Tech 2015-2020 Nissan 370Z Sport 2015-2018 Nissan 370Z Sport Tech 2019-2020 Nissan 370Z Sport Touring 2009-2019 Nissan 370Z Touring 2015-2018 Nissan 370Z Touring Sport

AEM Cold Air Intake Systems are designed to produce horsepower and torque gains. They replace the restrictive factory airbox and air filter to give you better performance and better engine sound. AEM cold air intakes relocate the air filter outside the engine compartment so cooler air can be fed into your engine. Cooler air carries more oxygen, which translates into a more intense explosion in the combustion chamber for more horsepower and torque. AEM Cold Air Intakes include an oversized AEM Dryflow synthetic washable air filter for outstanding air flow, filtration, and performance while allowing easy oil-free cleaning. They include a mandrel-bent aluminum intake tube and high quality hardware designed to reduce restriction and reduce intake temperature. The design and components of each intake system vary so consult the installation instructions for more information on the contents of each part number. This Air Intake cannot be sold in California. It is not legal for use in California or other states adopting California emission standards.Installation InstructionsUser 1This Part Fits: Year Make Model Submodel 2012-2014 Volkswagen Beetle Base 2011-2014 Volkswagen Golf Base 2011-2013 Volkswagen Jetta S 2011-2013 Volkswagen Jetta SE 2011-2013 Volkswagen Jetta SEL 2012-2014 Volkswagen Passat S 2012-2014 Volkswagen Passat SE 2012-2013 Volkswagen Passat SEL 2012-2013 Volkswagen Passat SEL Premium 2013-2014 Volkswagen Passat Wolfsburg Edition

AEM Performance Cold Air Intake Systems produce horsepower and torque gains by replacing your vehicle's restrictive factory air filter and air intake housing. This air intake system was designed, tuned and dyno-tested to fit specific Chevrolet Cruze models. Air enters the system through an oversized AEM Dryflow synthetic washable air filter for outstanding air flow, filtration and performance. The air filter is located in the original air box space and is protected by a heat shield which is designed to reduce intake air temperature and increase horsepower. The air intake tubing is constructed from mandrel-bent aluminum featuring a durable gunmetal gray powder coated finish. This air intake system was developed to accommodate the engine's factory emissions control devices including the mass air sensor. The tapered cylinder shaped AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). This air intake system is easy to install with commonly available tools. Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the vehicle applications to determine the legal status for each vehicle.Installation InstructionsUser 1This Part Fits: Year Make Model Submodel 2011-2015 Chevrolet Cruze Eco 2016 Chevrolet Cruze L 2016 Chevrolet Cruze LS 2011-2016 Chevrolet Cruze LT 2011-2015 Chevrolet Cruze LTZ 2016 Chevrolet Cruze Premier 2016 Chevrolet Cruze Limited Eco 2016 Chevrolet Cruze Limited LT 2016 Chevrolet Cruze Limited LTZ

AEM Cold Air Intake Systems are designed to produce horsepower and torque gains. They replace the restrictive factory airbox and air filter to give you better performance and better engine sound. AEM cold air intakes relocate the air filter outside the engine compartment so cooler air can be fed into your engine. Cooler air carries more oxygen, which translates into a more intense explosion in the combustion chamber for more horsepower and torque. AEM Cold Air Intakes include an oversized AEM Dryflow synthetic washable air filter for outstanding air flow, filtration, and performance while allowing easy oil-free cleaning. They include a mandrel-bent aluminum intake tube and high quality hardware designed to reduce restriction and reduce intake temperature. The design and components of each intake system vary so consult the installation instructions for more information on the contents of each part number. This Air Intake cannot be sold in California. It is not legal for use in California or other states adopting California emission standards.Installation InstructionsUser 1This Part Fits: Year Make Model Submodel 2011-2014 Hyundai Sonata GLS 2011-2014 Hyundai Sonata Hybrid 2013-2014 Hyundai Sonata Hybrid Limited 2011-2014 Hyundai Sonata Limited 2011-2014 Hyundai Sonata SE 2011-2014 Kia Optima EX 2011-2012 Kia Optima Hybrid 2013-2014 Kia Optima Hybrid EX 2013-2014 Kia Optima Hybrid LX 2011-2014 Kia Optima LX 2014 Kia Optima SX

The AEM 21-728C Performance Cold Air Intake System produces horsepower and torque gains by replacing your vehicle's restrictive factory air filter and air intake housing. This air intake system was designed, tuned and dyno-tested to fit specific Hyundai Genesis Coupe models. Air enters the system through an oversized AEM Dryflow synthetic washable air filter for outstanding air flow, filtration and performance. The air filter is located in the original air box space and is protected by a heat shield with a replacement air scoop adapter which is designed to reduce intake air temperature and increase horsepower. The intake tubing is constructed from mandrel-bent aluminum featuring a durable gunmetal gray powder coated finish. This air intake system was developed to accommodate the engine's factory emissions control devices including the mass air flow sensor. The tapered cylinder shaped AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). The air intake system is backed by AEM's Lifetime Limited Warranty. Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards while others are 50 state legal. View the 21-728C vehicle applications to determine the legal status for each vehicle.Installation InstructionsUser 1This Part Fits: Year Make Model Submodel 2013-2014 Hyundai Genesis Coupe 2.0T 2013-2014 Hyundai Genesis Coupe 2.0T Premium 2013-2014 Hyundai Genesis Coupe 2.0T R-Spec

The AEM 21-730C Performance Cold Air Intake System produces horsepower and torque gains by replacing your vehicle's restrictive factory air filter and air intake housing. This air intake system was designed, tuned and dyno-tested to fit specific Hyundai Genesis Coupe models. Air enters the system through an oversized AEM Dryflow synthetic washable air filter for outstanding air flow, filtration and performance. The air filter is located in the original air box space and is protected by a heat shield with a replacement fresh air adapter scoop which is designed to reduce intake air temperature and increase horsepower. The intake tubing is constructed from mandrel-bent aluminum featuring a durable gunmetal gray powder coated finish. This air intake system was developed to accommodate the engine's factory emissions control devices including the air temperature sensor, engine breather tube and sound tube. The tapered cylinder shaped AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). The air intake system is easy to install with commonly available tools and it is backed by AEM's Lifetime Limited Warranty. Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the 21-730C vehicle applications to determine the legal status for each vehicle.Installation InstructionsUser 1This Part Fits: Year Make Model Submodel 2015-2016 Hyundai Genesis Coupe 3.8 2013-2014 Hyundai Genesis Coupe 3.8 Grand Touring 2013-2016 Hyundai Genesis Coupe 3.8 R-Spec 2013 Hyundai Genesis Coupe 3.8 Track 2014-2016 Hyundai Genesis Coupe 3.8 Ultimate

The AEM 21-799C Performance Cold Air Intake System produces horsepower and torque gains by replacing your vehicle's restrictive factory air filter and air intake housing. This air intake system was designed, tuned and dyno-tested to fit specific Nissan Sentra models. Air enters the system through an oversized AEM Dryflow synthetic washable air filter for outstanding air flow, filtration and performance. The air filter is placed under the original air box space and above the driver-side wheel well which is designed to pull in cooler outside air and increase horsepower. The air intake tube is constructed from mandrel-bent aluminum featuring a durable gunmetal gray powder coated finish. This air intake system was developed to accommodate the engine's factory emissions control devices including the mass air flow sensor. The tapered cylinder shaped AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). The air intake system is backed by AEM's Lifetime Limited Warranty. Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the AEM 21-799C vehicle applications to determine the legal status for each vehicle.Installation InstructionsUser 1This Part Fits: Year Make Model Submodel 2013-2016 Nissan Sentra FE+S 2013-2014 Nissan Sentra FE+SV 2013-2019 Nissan Sentra S 2013-2019 Nissan Sentra SL 2013-2019 Nissan Sentra SR 2013-2019 Nissan Sentra SV

The AEM 21-738C Performance Cold Air Intake System produces horsepower and torque gains by replacing your vehicle's restrictive factory air filter and air intake housing. This air intake system was designed, tuned and dyno-tested to fit specific KIA Soul models. Air enters the system through an oversized AEM Dryflow synthetic washable air filter for outstanding air flow, filtration and performance. The air filter is relocated to the driver-side wheel well which is designed to reduce intake air temperature and increase horsepower. The intake tubing is constructed from mandrel-bent aluminum featuring a durable gunmetal gray powder coated finish. This air intake system was developed to accommodate the engine's factory emissions control devices including the valve cover breather hose. The tapered cylinder shaped AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). The air intake system is backed by AEM's Lifetime Limited Warranty. Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the 21-738C vehicle applications to determine the legal status for each vehicle.Installation InstructionsUser 1This Part Fits: Year Make Model Submodel 2014-2016 Kia Soul ! 2014-2016 Kia Soul +

The AEM-21-774DS Performance Cold Air Intake System produces horsepower and torque gains by replacing your vehicle's restrictive factory air filters and air intake housings. This air intake system was designed, tuned and dyno-tested to fit select Infiniti Q50 models. Air enters the system through dual AEM Dryflow synthetic washable air filters for outstanding air flow, filtration and performance. The air filters are located in the original air box spaces and are protected by heat shields which are designed to reduce intake air temperature and increase horsepower. Air is then fed to the engine through not one, but two air intake tubes. This air intake system was developed to accommodate the engine's factory emissions control devices including the mass air flow sensors and crankcase vent tube. The dual tapered cylinder shaped AEM Dryflow air filters are made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). The air intake system is easy to install with commonly available tools and it is backed by AEM's Lifetime Limited Warranty. Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards while others are 50 state legal. View the 21-774DS vehicle applications to determine the legal status for each vehicle.Installation InstructionsUser 1This Part Fits: Year Make Model Submodel 2014-2015 INFINITI Q50 Base 2014-2015 INFINITI Q50 Premium 2014-2015 INFINITI Q50 Sport

The AEM 21-753C Performance Cold Air Intake System produces horsepower and torque gains by replacing your vehicle's restrictive factory air filter and air intake housing. This air intake system was designed, tuned and dyno-tested to fit specific Chrysler 200 models. Air enters the system through an oversized AEM Dryflow synthetic washable air filter for outstanding air flow, filtration and performance. The air filter is located in the original air box space and is protected by a heat shield which is designed to reduce intake air temperature and increase horsepower. The intake tubing is constructed from mandrel-bent aluminum featuring a durable gunmetal gray powder coated finish. This air intake system was developed to accommodate the engine's factory emissions control devices including the inlet air temperature sensor and vent hose. The tapered cylinder shaped AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). The air intake system is easy to install with commonly available tools and it is backed by AEM's Lifetime Limited Warranty. Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the 21-753C vehicle applications to determine the legal status for each vehicle.Installation InstructionsUser 1This Part Fits: Year Make Model Submodel 2015-2016 Chrysler 200 C 2015-2016 Chrysler 200 Limited 2015-2016 Chrysler 200 LX 2015-2016 Chrysler 200 S

The AEM 21-8128DC Performance Cold Air Intake System produces horsepower and torque gains by replacing your vehicle's restrictive factory air filter and air intake housing. This air intake system was designed, tuned and dyno-tested to fit specific Ford F150 EcoBoost models. Air enters the system through an oversized AEM Dryflow synthetic washable air filter for outstanding air flow, filtration and performance. The air filter is located in the original air box space and is protected by a heat shield which is designed to reduce intake air temperature and increase horsepower. The air intake tubes are constructed from mandrel-bent aluminum featuring a durable gunmetal gray powder coated finish. This air intake system was developed to accommodate the engine's factory emissions control devices including the intake air temperature sensor. The dual intake AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). The air intake system is easy to install with commonly available tools and it is backed by AEM's Lifetime Limited Warranty. Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the 21-8128DC vehicle applications to determine the legal status for each vehicle.Installation InstructionsUser 1This Part Fits: Year Make Model Submodel 2015-2016 Ford F-150 King Ranch 2015-2021 Ford F-150 Lariat 2016 Ford F-150 Limited 2015-2016 Ford F-150 Platinum 2016 Ford F-150 SSV 2015-2021 Ford F-150 XL 2015-2021 Ford F-150 XLT

The AEM 21-8129DC Brute Force Air Intake System produces horsepower and torque gains by replacing the vehicle's restrictive factory air filter and air intake housing. This air intake system was designed, tuned and dyno-tested to fit specific Ford F150 models. Air enters the system through an extra-large AEM Dryflow synthetic washable air filter for outstanding air flow, filtration and performance. The air filter is located in the original air box space and is protected by a heat shield which is designed to reduce intake air temperature and increase horsepower. The intake tubing is constructed from mandrel-bent aluminum featuring a durable gunmetal gray powder coated finish. This air intake system was developed to accommodate the engine's factory emissions control devices including the EVAP vent and crank case vent hoses. The tapered cylinder shaped AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). The air intake system is easy to install with commonly available tools and it is backed by AEM's Lifetime Limited Warranty. Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the 21-8129DC vehicle applications to determine the legal status for each vehicle.Installation InstructionsUser 1This Part Fits: Year Make Model Submodel 2015-2020 Ford F-150 King Ranch 2015-2020 Ford F-150 Lariat 2015-2020 Ford F-150 Platinum 2016-2020 Ford F-150 SSV 2015-2020 Ford F-150 XL 2015-2020 Ford F-150 XLT

The AEM 21-755C Performance Cold Air Intake System produces horsepower and torque gains by replacing your vehicle's restrictive factory air filter and air intake housing. This air intake system was designed, tuned and dyno-tested to fit specific Ford Mustang models. Air enters the system through an oversized AEM Dryflow synthetic washable air filter for outstanding air flow, filtration and performance. The air filter is located in the original air box space and is protected by a heat shield which is designed to reduce intake air temperature and increase horsepower. The intake tubing is constructed from mandrel-bent aluminum featuring a durable gunmetal gray powder coated finish. This air intake system was developed to accommodate the engine's factory emissions control devices including the engine vent lines. The oval cylinder shaped AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). The air intake system is easy to install with commonly available tools and it is backed by AEM's Lifetime Limited Warranty. Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the 21-755C vehicle applications to determine the legal status for each vehicle.Installation InstructionsUser 1This Part Fits: Year Make Model Submodel 2015 Ford Mustang V6

The AEM 22-687C Performance Air Intake System is a free-flowing, mandrel-bent aluminum tube air induction system designed to replace the restrictive factory air filter and air intake tubing while retaining the factory air box on some Ford Mustang GT models. The air intake system comes with a replacement AEM high-flow air filter and a free-flowing aluminum intake tube that easily connects to your vehicle's factory air box and engine throttle body to dramatically increase air flow into your engine. With more air flowing through the custom-tuned intake tube you experience more horsepower and acceleration throughout the engine's RPM range. The intake tube is finished with an attractive and durable gunmetal gray powder-coating that provides a clean, high-performance look under the hood. The AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before servicing is needed (depending on driving conditions). The air intake is designed for easy installation and simply requires one screwdriver to do the job. The intake tube accommodates factory emissions control devices including vacuum and vent hoses where applicable. This air intake system is street legal in all 50 US states and comes with AEM's Lifetime Limited Warranty.Installation InstructionsUser 1This Part Fits: Year Make Model Submodel 2015-2017 Ford Mustang GT 2015 Ford Mustang GT 50 Years Limited Edition 2015-2017 Ford Mustang GT Premium