The AEM Performance Cold Air Intake System produces horsepower and torque gains by replacing your vehicle's restrictive factory air filter and air intake housing. This air intake system was designed, tuned and dyno-tested to fit specific models. Air enters the system through an oversized AEM Dryflow synthetic washable air filter for outstanding air flow, filtration and performance. The air filter is located in the original air box space and is protected by a heat shield which is designed to reduce intake air temperature and increase horsepower. The air intake tube is constructed from mandrel-bent aluminum featuring a durable gunmetal gray powder coated finish. This air intake system was developed to accommodate the engine's factory emissions control devices including the mass airflow sensor and breather tube. The tapered cylinder shaped AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). The air intake system is easy to install with commonly available tools and it is backed by AEM's Lifetime Limited Warranty. Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the vehicle applications to determine the legal status for each vehicle.Installation InstructionsTechnical DrawingThis Part Fits: Year Make Model Submodel 2007-2011 Toyota Camry LE 2007-2011 Toyota Camry SE 2007-2011 Toyota Camry XLE 2009-2011 Toyota Venza Base 2012-2014 Toyota Venza LE 2012-2015 Toyota Venza Limited 2012-2015 Toyota Venza XLE

This Performance Air Intake System allows your engine to breathe more air compared to the restrictive factory air intake housing. It is designed, tuned and dyno-tested to produce more horsepower and torque. Air enters the system from the factory fresh air inlets. through replacement air duct and into a roto-molded, aerodynamic AEM air box containing an oversized AEM Dryflow synthetic washable air filter for outstanding air flow, filtration and performance.The cone shaped AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). This Air Intake System is backed by AEM's Lifetime Limited Warranty. Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the vehicle applications to determine the legal status for each vehicle.Installation InstructionsUser 1This Part Fits: Year Make Model Submodel 2007-2013 BMW 328i Base 2009-2010,2012-2013 BMW 328i xDrive Base 2007-2008 BMW 328xi Base

The AEM 21-642P Performance Cold Air Intake System produces horsepower and torque gains by replacing your vehicle's restrictive factory air filter and air intake housing. This air intake system was designed, tuned and dyno-tested to fit specific Mazda Mazdaspeed3 models. Air enters the system through an oversized AEM Dryflow synthetic washable air filter for outstanding air flow, filtration and performance. The air filter is relocated to the driver-side wheel well which is designed to reduce intake air temperature and increase horsepower. The intake tubing is constructed from mandrel-bent aluminum featuring a durable chrome-like finish. This air intake system was developed to accommodate the engine's factory emissions control devices including the mass air flow sensor and breather hoses. The tapered cylinder shaped AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). The air intake system is backed by AEM's Lifetime Limited Warranty. Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the 21-642P vehicle applications to determine the legal status for each vehicle.Installation InstructionsUser 1This Part Fits: Year Make Model Submodel 2007-2013 Mazda 3 Mazdaspeed

The AEM-29-0005 performance strut bar provides additional vehicle stability on various Mini Cooper S models that have the AEM 21-699C cold air intake installed. AEM strut bars are constructed from 1-1/2 inch steel tubing, providing great strength and low weight which gives you a true racing option and a more professional alternative to many hinged or weaker strut bars on the market. The AEM-29-0005 performance strut bar comes in a charcoal gray powder coat finish with the AEM logo giving you a clean high-performance look under the hood. This strut bar is easy to install using the existing factory mounting points.Installation InstructionsThis Part Fits: Year Make Model Submodel 2012-2013 Mini Cooper Coupe S 2012-2013 Mini Cooper Roadster S 2007-2013 Mini Cooper S 2012-2013 Mini Cooper S Clubman 2012 Mini Cooper Countryman S 2012 Mini Cooper Countryman S ALL4

The AEM 21-682C Performance Cold Air Intake System produces horsepower and torque gains by replacing your vehicle's restrictive factory air filter and air intake housing. This air intake system was designed, tuned and dyno-tested to fit specific Chevrolet Cobalt models. Air enters the system through an oversized AEM Dryflow synthetic washable air filter for outstanding air flow, filtration and performance. The air filter is relocated to the passenger-side wheel well which is designed to reduce intake air temperature and increase horsepower. The intake tubing is constructed from mandrel-bent aluminum featuring a durable gunmetal gray powder coated finish. This air intake system was developed to accommodate the engine's factory emissions control devices including the mass air flow sensor and PCV hose. The tapered cylinder shaped AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). The air intake system is backed by AEM's Lifetime Limited Warranty. Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the 21-682C vehicle applications to determine the legal status for each vehicle.Installation InstructionsUser 1This Part Fits: Year Make Model Submodel 2008-2010 Chevrolet Cobalt SS

The AEM 21-478WR Performance Cold Air Intake System produces horsepower and torque gains by replacing your vehicle's restrictive factory air filter and air intake housing. This air intake system was designed, tuned and dyno-tested to fit specific Subaru WRX, WRX STI, Impreza WRX and Impreza WRX STI models. Air enters the system through an oversized AEM Dryflow synthetic washable air filter for outstanding air flow, filtration and performance. The air filter is located in the original air box space and is protected by a heat shield which is designed to reduce intake air temperature and increase horsepower. The intake tubing is constructed from mandrel-bent aluminum featuring a durable textured red powder coated finish. This air intake system was developed to accommodate the engine's factory emissions control devices including the mass air flow sensor. The cylinder shaped AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). The air intake system is easy to install with commonly available tools and it is backed by AEM's Lifetime Limited Warranty. Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards while others are 50 state legal. View the 21-478WR vehicle applications to determine the legal status for each vehicle.Installation InstructionsUser 1This Part Fits: Year Make Model Submodel 2011 Subaru Impreza 2.5i 2011 Subaru Impreza 2.5i Premium 2011 Subaru Impreza Outback Sport 2008-2014 Subaru Impreza WRX 2010-2014 Subaru Impreza WRX Limited 2009-2014 Subaru Impreza WRX Premium 2008-2014 Subaru Impreza WRX STI 2011-2014 Subaru Impreza WRX STI Limited 2010 Subaru Impreza WRX STI Special Edition

The AEM 21-678C Performance Cold Air Intake System produces horsepower and torque gains by replacing your vehicle's restrictive factory air filter and air intake housing. This air intake system was designed, tuned and dyno-tested to fit specific Mitsubishi Lancer Evolution, MR and GSR models. Air enters the system through an oversized AEM Dryflow synthetic washable air filter for outstanding air flow, filtration and performance. The air filter is located in the original air box space and is protected by a replacement air box which is designed to reduce intake air temperature and increase horsepower. The intake tubing is constructed from aluminum featuring a durable gunmetal gray powder coated finish. This air intake system was developed to accommodate the engine's factory emissions control devices including the mass air flow sensor, air bypass valve and engine vacuum lines as well as a replacement rubber inlet hose. The wide cone shaped AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). The air intake system is backed by AEM's Lifetime Limited Warranty. Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards while others are 50 state legal. View the 21-678C vehicle applications to determine the legal status for each vehicle.Installation InstructionsUser 1This Part Fits: Year Make Model Submodel 2016 Mitsubishi Lancer ES 2015 Mitsubishi Lancer Evolution Final Edition 2008,2010-2015 Mitsubishi Lancer Evolution GSR 2008,2010-2015 Mitsubishi Lancer Evolution MR 2010-2011 Mitsubishi Lancer Evolution MR Touring 2010 Mitsubishi Lancer Evolution SE

AEM cold air intake systems are designed to increase horsepower and torque. The system includes an oversized AEM DRYFLOW synthetic washable air filter, engineered to provide outstanding airflow, filtration, and performance, and also features a mandrel-bent aluminum intake tube and high quality hardware. The oversized, conical filter design allows you to go up to 100,000 miles between filter services under normal highway driving conditions. A custom heat shield helps protect intake air from the high temperature of your engine bay, and the factory fresh air duct attaches to the heat shield. The entire system can typically be installed in less than 90 minutes. Some intakes are not legal for sale or use on any pollution controlled motor vehicle in California. See the product specifications for CARB status on each part for a specific vehicle.Installation InstructionsUser 1This Part Fits: Year Make Model Submodel 2008-2014 Subaru Impreza WRX 2010-2014 Subaru Impreza WRX Limited 2009-2014 Subaru Impreza WRX Premium 2008-2014 Subaru Impreza WRX STI 2011-2014 Subaru Impreza WRX STI Limited 2010 Subaru Impreza WRX STI Special Edition

The AEM 21-8223DP Brute Force Air Intake System produces horsepower and torque gains by replacing the vehicle's restrictive factory air filter and air intake housing. This air intake system was designed, tuned and dyno-tested to fit specific Dodge Charger and Challenger models. Air enters the system through an extra-large AEM Dryflow synthetic washable air filter for outstanding air flow, filtration and performance. The air filter is relocated above the driver's side wheel well which is designed to reduce intake air temperature and increase horsepower. The intake tubing is constructed from mandrel-bent aluminum featuring a durable chrome-like finish. This air intake system was developed to accommodate the engine's factory emissions control devices including the IAT sensor and crank case breather hose. The cylinder shaped AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). The air intake system is backed by AEM's Lifetime Limited Warranty. Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards while others are 50 state legal. View the 21-8223DP vehicle applications to determine the legal status for each vehicle.Installation InstructionsUser 1This Part Fits: Year Make Model Submodel 2009-2017 Dodge Challenger R/T 2012 Dodge Challenger R/T Classic 2015-2016 Dodge Challenger R/T Plus 2016 Dodge Challenger R/T Plus Shaker 2016 Dodge Challenger R/T Shaker 2008-2010 Dodge Challenger SRT8 2017 Dodge Challenger T/A 2017 Dodge Charger Daytona 2009-2017 Dodge Charger Pursuit 2009-2017 Dodge Charger R/T 2015-2016 Dodge Charger R/T Road & Track 2009-2014 Dodge Charger SE 2009-2010 Dodge Charger SRT8

The AEM 21-8030DC Performance Cold Air Intake System produces horsepower and torque gains by replacing your vehicle's restrictive factory air filter and air intake housing. This air intake system was designed, tuned and dyno-tested to fit specific vehicle models. Air enters the system through an oversized AEM Dryflow synthetic washable air filter for outstanding air flow, filtration and performance. The air filter is located in the original air box space and is protected by a replacement air box with an AEM logo embossed lid which is designed to reduce intake air temperature and increase horsepower. The intake tubing is constructed from mandrel-bent aluminum featuring a durable black powder coated finish. This air intake system was developed to accommodate the engine's factory emissions control devices including the mass air flow sensor and PCV line as well as a replacement AEM filter minder. The oval cylinder shaped AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). The air intake system is backed by AEM's Lifetime Limited Warranty. . Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards while others are 50 state legal. View the 21-8030DC vehicle applications to determine the legal status for each vehicle.Installation InstructionsUser 1This Part Fits: Year Make Model Submodel 2009-2013 Cadillac Escalade Base 2011-2013 Cadillac Escalade Luxury 2009-2013 Cadillac Escalade Platinum 2011-2013 Cadillac Escalade Premium 2009-2013 Cadillac Escalade ESV Base 2011-2013 Cadillac Escalade ESV Luxury 2009-2013 Cadillac Escalade ESV Platinum 2011-2013 Cadillac Escalade ESV Premium 2009-2013 Cadillac Escalade EXT Base 2011-2013 Cadillac Escalade EXT Luxury 2011-2013 Cadillac Escalade EXT Premium 2013 Chevrolet Avalanche Black Diamond LS 2013 Chevrolet Avalanche Black Diamond LT 2013 Chevrolet Avalanche Black Diamond LTZ 2009-2012 Chevrolet Avalanche LS 2009-2012 Chevrolet Avalanche LT 2009-2012 Chevrolet Avalanche LTZ 2009-2013 Chevrolet Silverado 1500 LS 2009-2013 Chevrolet Silverado 1500 LT 2009-2013 Chevrolet Silverado 1500 LTZ 2009-2013 Chevrolet Silverado 1500 WT 2010-2013 Chevrolet Silverado 1500 XFE 2009-2014 Chevrolet Suburban 1500 LS 2009-2014 Chevrolet Suburban 1500 LT 2009-2014 Chevrolet Suburban 1500 LTZ 2009-2014 Chevrolet Tahoe LS 2009-2014 Chevrolet Tahoe LT 2009-2014 Chevrolet Tahoe LTZ 2009-2014 Chevrolet Tahoe PPV 2012-2014 Chevrolet Tahoe SSV 2009-2013 GMC Sierra 1500 Denali 2009-2013 GMC Sierra 1500 SL 2009-2013 GMC Sierra 1500 SLE 2009-2013 GMC Sierra 1500 SLT 2009-2013 GMC Sierra 1500 WT 2010-2013 GMC Sierra 1500 XFE 2009-2014 GMC Yukon Denali 2009-2014 GMC Yukon SLE 2009-2014 GMC Yukon SLT 2009-2013 GMC Yukon XL 1500 Denali 2009-2014 GMC Yukon XL 1500 SLE 2009-2014 GMC Yukon XL 1500 SLT

The AEM 21-698C Performance Cold Air Intake System produces horsepower and torque gains by replacing your vehicle's restrictive factory air filter and air intake housing. This air intake system was designed, tuned and dyno-tested to fit specific Mitsubishi Lancer Ralliart models. Air enters the system through an oversized AEM Dryflow synthetic washable air filter for outstanding air flow, filtration and performance. The air filter is located in the original air box space and is protected by a replacement air box with a logo embossed aluminum lid which is designed to reduce intake air temperature and increase horsepower. The intake tubing is constructed from mandrel-bent aluminum featuring a durable black powder coated finish. This air intake system was developed to accommodate the engine's factory emissions control devices including the mass air flow sensor, waste gate solenoid and valve cover breather hose as well as a replacement AEM filter minder. The cylinder shaped AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). The air intake system is backed by AEM's Lifetime Limited Warranty. Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards while others are 50 state legal. View the 21-698C vehicle applications to determine the legal status for each vehicle.Installation InstructionsUser 1Technical BulletinThis Part Fits: Year Make Model Submodel 2009-2014 Mitsubishi Lancer Ralliart 2010-2011 Mitsubishi Lancer Ralliart Sportback

The AEM-29-0004WR performance strut bar provides additional vehicle stability on various Subaru Impreza WRX and STI models. AEM strut bars are constructed from 1-1/2 inch steel tubing, providing great strength and low weight which gives you a true racing option and a more professional alternative to many hinged or weaker strut bars on the market. The AEM-29-0004WR performance strut bar comes in an attractive red powder coat finish with the AEM logo giving you a clean high-performance look under the hood. This strut bar is easy to install using the existing factory mounting points.Installation InstructionsThis Part Fits: Year Make Model Submodel 2009-2014 Subaru Impreza WRX 2010-2014 Subaru Impreza WRX Limited 2009-2014 Subaru Impreza WRX Premium 2009-2014 Subaru Impreza WRX STI 2011-2014 Subaru Impreza WRX STI Limited 2010 Subaru Impreza WRX STI Special Edition

The AEM 21-687P Performance Cold Air Intake System produces horsepower and torque gains by replacing your vehicle's restrictive factory air filter and air intake housing. This air intake system was designed, tuned and dyno-tested to fit specific Hyundai Genesis Coupe models. Air enters the system through an oversized AEM Dryflow synthetic washable air filter for outstanding air flow, filtration and performance. The air filter is located in the original air box space which is designed to reduce intake air temperature and increase horsepower. The intake tubing is constructed from mandrel-bent aluminum featuring a durable chrome-like finish. This air intake system was developed to accommodate the engine's factory emissions control devices including the engine breather hoses. A replacement windshield washer bottle is included to adapt to the new shape of the air intake system. The tapered cylinder shaped AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards while others are 50 state legal. View the 21-687P vehicle applications to determine the legal status for each vehicle.Installation InstructionsUser 1This Part Fits: Year Make Model Submodel 2010-2012 Hyundai Genesis Coupe 2.0T 2010-2012 Hyundai Genesis Coupe 2.0T Premium 2010-2012 Hyundai Genesis Coupe 2.0T R-Spec 2010 Hyundai Genesis Coupe 2.0T Track

The AEM 21-687C Performance Cold Air Intake System produces horsepower and torque gains by replacing your vehicle's restrictive factory air filter and air intake housing. This air intake system was designed, tuned and dyno-tested to fit specific Hyundai Genesis Coupe models. Air enters the system through an oversized AEM Dryflow synthetic washable air filter for outstanding air flow, filtration and performance. The air filter is located in the original air box space which is designed to reduce intake air temperature and increase horsepower. The intake tubing is constructed from mandrel-bent aluminum featuring a durable gunmetal gray powder coated finish. This air intake system was developed to accommodate the engine's factory emissions control devices including the engine breather hoses. A replacement windshield washer bottle is included to adapt to the new shape of the air intake system. The tapered cylinder shaped AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards while others are 50 state legal. View the 21-687C vehicle applications to determine the legal status for each vehicle.Installation InstructionsUser 1This Part Fits: Year Make Model Submodel 2010-2012 Hyundai Genesis Coupe 2.0T 2010-2012 Hyundai Genesis Coupe 2.0T Premium 2010-2012 Hyundai Genesis Coupe 2.0T R-Spec 2010 Hyundai Genesis Coupe 2.0T Track

The AEM 21-763C Performance Cold Air Intake System produces horsepower and torque gains by replacing your vehicle's restrictive factory air filter and air intake housing. This air intake system was designed, tuned and dyno-tested to fit specific Volkswagen Jetta models. Air enters the system through an oversized AEM Dryflow synthetic washable air filter for outstanding air flow, filtration and performance. The air filter is located in the original air box location and is protected by a heat shield which is designed to reduce intake air temperature and increase horsepower. The intake tubing is constructed from mandrel-bent aluminum featuring a durable gunmetal gray powder coated finish. This air intake system was developed to accommodate the engine's factory emissions control devices including the mass air flow sensor and vacuum line. The tapered cylinder shaped AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). The air intake system is easy to install with commonly available tools and it is backed by AEM's Lifetime Limited Warranty. Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the 21-763C vehicle applications to determine the legal status for each vehicle.Installation InstructionsUser 1This Part Fits: Year Make Model Submodel 2011 Volkswagen Jetta Base 2012-2014 Volkswagen Jetta GLI 2011-2014 Volkswagen Jetta S 2010-2014 Volkswagen Jetta TDI 2010 Volkswagen Jetta TDI Cup Edition 2012-2014 Volkswagen Jetta TDI Premium 2015-2016 Volkswagen Tiguan R-Line 2015-2017 Volkswagen Tiguan S 2015-2016 Volkswagen Tiguan SE 2015-2017 Volkswagen Tiguan SEL 2017 Volkswagen Tiguan Sport 2017 Volkswagen Tiguan Wolfsburg Edition

The AEM 21-702C Performance Cold Air Intake System produces horsepower and torque gains by replacing your vehicle's restrictive factory air filter and air intake housing. This air intake system was designed, tuned and dyno-tested to fit specific Ford Focus models. Air enters the system through an oversized AEM Dryflow synthetic washable air filter for outstanding air flow, filtration and performance. The air filter is relocated to the driver-side wheel well which is designed to reduce intake air temperature and increase horsepower. The intake tubing is constructed from mandrel-bent aluminum featuring a durable gunmetal gray powder coated finish. This air intake system was developed to accommodate the engine's factory emissions control devices including the PCV hose and mass air flow sensor (which includes an AEM extension harness). The tapered cylinder shaped AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). The air intake system is backed by AEM's Lifetime Limited Warranty. Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the 21-702C vehicle applications to determine the legal status for each vehicle.Installation InstructionsUser 1This Part Fits: Year Make Model Submodel 2012 Ford Focus S 2012 Ford Focus SE 2012 Ford Focus SEL 2012 Ford Focus Titanium

The AEM 21-715C Performance Cold Air Intake System produces horsepower and torque gains by replacing your vehicle's restrictive factory air filter and air intake housing. This air intake system was designed, tuned and dyno-tested to fit specific Hyundai Veloster models. Air enters the system through an oversized AEM Dryflow synthetic washable air filter for outstanding air flow, filtration and performance. The air filter is relocated to the driver-side wheel well which is designed to reduce intake air temperature and increase horsepower. The intake tubing is constructed from mandrel-bent aluminum featuring a durable gunmetal gray powder coated finish. This air intake system was developed to accommodate the engine's factory emissions control devices including a replacement silicone breather hose. The tapered cylinder shaped AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). The air intake system is backed by AEM's Lifetime Limited Warranty. Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the 21-715C vehicle applications to determine the legal status for each vehicle.Installation InstructionsUser 1This Part Fits: Year Make Model Submodel 2012-2017 Hyundai Veloster Base 2014-2015 Hyundai Veloster RE:FLEX 2017 Hyundai Veloster Turbo 2017 Hyundai Veloster Turbo R-Spec 2017 Hyundai Veloster Value Edition

The AEM 21-715P Performance Cold Air Intake System produces horsepower and torque gains by replacing your vehicle's restrictive factory air filter and air intake housing. This air intake system was designed, tuned and dyno-tested to fit specific Hyundai Veloster models. Air enters the system through an oversized AEM Dryflow synthetic washable air filter for outstanding air flow, filtration and performance. The air filter is relocated to the driver-side wheel well which is designed to reduce intake air temperature and increase horsepower. The intake tubing is constructed from mandrel-bent aluminum featuring a durable chrome-like finish. This air intake system was developed to accommodate the engine's factory emissions control devices including a replacement silicone breather hose. The tapered cylinder shaped AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). The air intake system is backed by AEM's Lifetime Limited Warranty. Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the 21-715P vehicle applications to determine the legal status for each vehicle.Installation InstructionsUser 1This Part Fits: Year Make Model Submodel 2012-2017 Hyundai Veloster Base 2014-2015 Hyundai Veloster RE:FLEX 2017 Hyundai Veloster Turbo 2017 Hyundai Veloster Turbo R-Spec 2017 Hyundai Veloster Value Edition

The AEM 21-788C Performance Cold Air Intake System produces horsepower and torque gains by replacing your vehicle's restrictive factory air filter and air intake housing. This air intake system was designed, tuned and dyno-tested to fit specific Chevrolet Sonic models. Air enters the system through an oversized AEM Dryflow synthetic washable air filter for outstanding air flow, filtration and performance. The air filter is located in the original air box space and is protected by a heat shield which is designed to reduce intake air temperature and increase horsepower. The air intake tube is constructed from mandrel-bent aluminum featuring a durable gunmetal gray powder coated finish. This air intake system was developed to accommodate the engine's factory emissions control devices including the mass air sensor. The tapered cylinder shaped AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). The air intake system is easy to install with commonly available tools and it is backed by AEM's Lifetime Limited Warranty. Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the 21-788C vehicle applications to determine the legal status for each vehicle.Installation InstructionsUser 1This Part Fits: Year Make Model Submodel 2019-2020 Chevrolet Sonic LS 2012-2020 Chevrolet Sonic LT 2012-2016 Chevrolet Sonic LTZ 2017-2020 Chevrolet Sonic Premier 2013-2016 Chevrolet Sonic RS

The AEM 21-772C Performance Cold Air Intake System produces horsepower and torque gains by replacing your vehicle's restrictive factory air filter and air intake housing. This air intake system was designed, tuned and dyno-tested to fit specific Subaru Impreza models. Air enters the system through an oversized AEM Dryflow synthetic washable air filter for outstanding air flow, filtration and performance. The air filter is located in the original air box space and is protected by a heat shield which is designed to reduce intake air temperature and increase horsepower. The air intake tube is constructed from mandrel-bent aluminum featuring a durable gunmetal gray powder coated finish. This air intake system was developed to accommodate the engine's factory emissions control devices including the mass airflow sensor. The tapered cylinder shaped AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). The air intake system is easy to install with commonly available tools and it is backed by AEM's Lifetime Limited Warranty. Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the 21-772C vehicle applications to determine the legal status for each vehicle.Installation InstructionsUser 1This Part Fits: Year Make Model Submodel 2016 Subaru Crosstrek Base 2016 Subaru Crosstrek Hybrid 2016 Subaru Crosstrek Hybrid Touring 2016 Subaru Crosstrek Limited 2016 Subaru Crosstrek Premium 2012-2016 Subaru Impreza Base 2012-2016 Subaru Impreza Limited 2012-2016 Subaru Impreza Premium 2012-2016 Subaru Impreza Sport Limited 2012-2016 Subaru Impreza Sport Premium 2015 Subaru XV Crosstrek Base 2014-2015 Subaru XV Crosstrek Hybrid 2014-2015 Subaru XV Crosstrek Hybrid Touring 2013-2015 Subaru XV Crosstrek Limited 2013-2015 Subaru XV Crosstrek Premium

The AEM 21-8228DP Brute Force Air Intake System produces horsepower and torque gains by replacing the vehicle's restrictive factory air filter and air intake housing. This air intake system was designed, tuned and dyno-tested to fit specific Dodge Ram 1500 Pickup and RAM 1500 models. Air enters the system through an extra-large AEM Dryflow synthetic washable air filter for outstanding air flow, filtration and performance. The air filter is located in the original air box space and is protected by a heat shield which is designed to reduce intake air temperature and increase horsepower. The intake tubing is constructed from mandrel-bent aluminum featuring a durable chrome-like finish. This air intake system was developed to accommodate the engine's factory emissions control devices including the IAT sensor and crank case breather hose. The oval cylinder shaped AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). The air intake system is easy to install with commonly available tools and it is backed by AEM's Lifetime Limited Warranty. Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the 21-8228DP vehicle applications to determine the legal status for each vehicle.Installation InstructionsUser 1This Part Fits: Year Make Model Submodel 2013-2014 Ram 1500 Big Horn 2012-2014 Ram 1500 Express 2014 Ram 1500 HFE 2013-2014 Ram 1500 Laramie 2014 Ram 1500 Laramie Limited 2013-2014 Ram 1500 Laramie Longhorn 2014 Ram 1500 Lone Star 2013-2014 Ram 1500 Outdoorsman 2013 Ram 1500 R/T 2013-2014 Ram 1500 SLT 2014 Ram 1500 Special Service 2013-2014 Ram 1500 Sport 2013-2014 Ram 1500 Tradesman

The AEM 21-750 Performance Cold Air Intake System produces horsepower and torque gains by replacing your vehicle's restrictive factory air filter and air intake housing. This air intake system was designed, tuned and dyno-tested to fit specific Audi A4 and A5 models. Air enters the system through an oversized AEM Dryflow synthetic washable air filter for outstanding air flow, filtration and performance. The air filter is located in the original air box location and can optionally be protected by an AEM embossed heat shield which is designed to reduce intake air temperature and increase horsepower. This air intake system was developed to accommodate the engine's factory emissions control devices including the mass air flow sensor. The tapered cylinder shaped AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). The air intake system is easy to install with commonly available tools and it is backed by AEM's Lifetime Limited Warranty. Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the AEM 21-750 vehicle applications to determine the legal status for each vehicle.Installation InstructionsUser 1This Part Fits: Year Make Model Submodel 2013-2014 Audi A4 Base 2015-2016 Audi A4 Premium 2015-2016 Audi A4 Premium Plus 2015 Audi A4 Prestige 2014 Audi A5 Cabriolet

The AEM 21-781DS Performance Cold Air Intake System produces horsepower and torque gains by replacing your vehicle's restrictive factory air filter and air intake housing. This air intake system was designed, tuned and dyno-tested to fit specific Mercedes Benz CLA250 models. Air enters the system from the factory fresh air inlets, through replacement air ducts and into a roto-molded, aerodynamic AEM air box containing an oversized AEM Dryflow synthetic washable air filter for outstanding air flow, filtration and performance. This air intake system was developed to accommodate the engine's factory emissions control devices including the ECU. The tapered cylinder shaped AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). The air intake system is easy to install with commonly available tools and it is backed by AEM's Lifetime Limited Warranty. Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the 21-781DS vehicle applications to determine the legal status for each vehicle.Installation InstructionsUser 1This Part Fits: Year Make Model Submodel 2014-2019 Mercedes-Benz CLA250 4Matic 2014-2019 Mercedes-Benz CLA250 Base 2015-2020 Mercedes-Benz GLA250 4Matic 2015-2020 Mercedes-Benz GLA250 Base

The AEM 21-734C Performance Cold Air Intake System produces horsepower and torque gains by replacing your vehicle's restrictive factory air filter and air intake housing. This air intake system was designed, tuned and dyno-tested to fit specific Nissan Juke models. Air enters the system through an oversized AEM Dryflow synthetic washable air filter for outstanding air flow, filtration and performance. The air filter is relocated to the driver-side wheel well which is designed to reduce intake air temperature and increase horsepower. The intake tubing is constructed from mandrel-bent aluminum featuring a durable gunmetal gray powder coated finish. This air intake system was developed to accommodate the engine's factory emissions control devices including the mass air flow sensor. The tapered oval shaped AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). The air intake system is backed by AEM's Lifetime Limited Warranty. Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the 21-734C vehicle applications to determine the legal status for each vehicle.Installation InstructionsUser 1This Part Fits: Year Make Model Submodel 2013-2016 Nissan Juke Nismo 2014-2016 Nissan Juke Nismo RS 2012-2016 Nissan Juke S 2012-2016 Nissan Juke SL 2012-2016 Nissan Juke SV

This Performance Air Intake System allows your engine to breath more air compared to the restrictive factory air intake housing. It is designed, tuned, and dyno-tested to produce more horsepower and torque. The cone-shaped AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). A custom shaped heat shield with edge trim lining is included to keep engine bay heat from the air intake. The air intake tube is constructed from mandrel-bent aluminum featuring a durable gunmetal gray powder coated finish. This air intake system is backed by AEM's Lifetime Limited Warranty. Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the vehicle applications to determine the legal status for each vehicle.User 1Installation InstructionsInstallation InstructionsThis Part Fits: Year Make Model Submodel 2013-2016 Scion FR-S Base 2013-2020 Subaru BRZ Limited 2013-2019 Subaru BRZ Premium 2015 Subaru BRZ Series.Blue 2019 Subaru BRZ Series.Gray 2016 Subaru BRZ Series.HyperBlue 2017 Subaru BRZ Series.Yellow 2018,2020 Subaru BRZ TS 2017-2020 Toyota 86 Base 2018-2020 Toyota 86 GT 2020 Toyota 86 Hakone Edition 2017 Toyota 86 Special Edition 2019 Toyota 86 TRD Special Edition

The AEM AEM-21-743C Performance Cold Air Intake System produces horsepower and torque gains by replacing your vehicle's restrictive factory air filter and air intake housing. This air intake system was designed, tuned and dyno-tested to fit specific Ford Fusion models. Air enters the system through an oversized AEM Dryflow synthetic washable air filter for outstanding air flow, filtration and performance. The air filter is located in the lower air box space and is protected by a heat shield which is designed to reduce intake air temperature and increase horsepower. The intake tubing is constructed from mandrel-bent aluminum featuring a durable gunmetal gray powder coated finish. This air intake system was developed to accommodate the engine's factory emissions control devices including the intake air temperature sensor and vent line. The tapered cylinder shaped AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). The air intake system is easy to install with commonly available tools and it is backed by AEM's Lifetime Limited Warranty. Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the AEM-21-743C vehicle applications to determine the legal status for each vehicle.Installation InstructionsUser 1This Part Fits: Year Make Model Submodel 2014-2016 Ford Fusion Energi SE 2014-2016 Ford Fusion Energi Titanium 2014-2016 Ford Fusion S Hybrid 2014-2016 Ford Fusion SE 2014-2016 Ford Fusion SE Hybrid 2014-2016 Ford Fusion Titanium 2014-2016 Ford Fusion Titanium Hybrid

The AEM 21-806C Performance Cold Air Intake System produces horsepower and torque gains by replacing your vehicle's restrictive factory air filter and air intake housing. This air intake system was designed, tuned and dyno-tested to fit select Lexus GS350 models. Air enters the system through an oversized AEM Dryflow synthetic washable air filter for outstanding air flow, filtration and performance. The air filter is located in the original air box space and is protected by a heat shield which is designed to reduce intake air temperature and increase horsepower. The air intake tubing is constructed from mandrel-bent aluminum featuring a durable gunmetal gray powder coated finish. This air intake system was developed to accommodate the engine's factory emissions control devices including the mass air flow sensor and PCV hose. The tapered cylinder shaped AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). The air intake system is easy to install with commonly available tools. Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the 21-806C vehicle applications to determine the legal status for each vehicle.Installation InstructionsUser 1This Part Fits: Year Make Model Submodel 2013-2020 Lexus GS350 Base 2013-2020 Lexus GS350 F Sport 2014-2015 Lexus IS250 Base 2014-2015 Lexus IS250 C 2014-2015 Lexus IS250 C F Sport 2014-2015 Lexus IS250 F Sport 2013-2020 Lexus IS350 Base 2013-2015 Lexus IS350 C 2014-2015 Lexus IS350 C F Sport 2014-2021 Lexus IS350 F Sport 2015-2021 Lexus RC350 Base 2015-2021 Lexus RC350 F Sport

The AEM 21-759C Performance Cold Air Intake System produces horsepower and torque gains by replacing your vehicle's restrictive factory air filter and air intake housing. This air intake system was designed, tuned and dyno-tested to fit specific Lexus IS250 and IS350 models. Air enters the system through an oversized AEM Dryflow synthetic washable air filter for outstanding air flow, filtration and performance. The air filter is located in the original air box space and is protected by a heat shield which is designed to reduce intake air temperature and increase horsepower. The intake tubing is constructed from mandrel-bent aluminum featuring a durable gunmetal gray powder coated finish. This air intake system was developed to accommodate the engine's factory emissions control devices including the mass air flow sensor and PCV hose. The tapered cylinder shaped AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). The air intake system is easy to install with commonly available tools. Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the 21-759C vehicle applications to determine the legal status for each vehicle.Installation InstructionsUser 1This Part Fits: Year Make Model Submodel 2014-2015 Lexus IS250 Base 2014-2015 Lexus IS250 C 2014-2015 Lexus IS250 C F Sport 2014-2015 Lexus IS250 F Sport 2014-2017 Lexus IS350 Base 2014-2015 Lexus IS350 C 2014-2015 Lexus IS350 C F Sport 2014-2017 Lexus IS350 F Sport

The AEM 21-811C Performance Cold Air Intake System produces horsepower and torque gains by improving air flow and drawing in cooler, denser air. It all begins with a cone shaped AEM Dryflow filter which uses a synthetic filter media for outstanding air flow, filtration and performance. By relocating the air filter lower and to the front of the car, cooler and denser air can be accessed. Oiling the filter is not necessary and it can be used up to 100,000 miles before cleaning is needed (depending on driving conditions). Running up to the throttle body is the intake tube which is mandrel-bent to reduce airflow restriction at the bends. It is made of aluminum and is powder coated gray for lasting performance. The restrictive factory air pipe and air box are replaced with this free-flowing air intake system. The factory PCV valve and recirculation hose mount directly on the intake tube. Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the 21-811C vehicle applications to determine the legal status for each vehicle.Installation InstructionsUser 1This Part Fits: Year Make Model Submodel 2014-2016 Kia Forte Koup SX 2014-2016 Kia Forte5 EX 2016 Kia Forte5 LX 2014-2017 Kia Forte5 SX

The AEM Performance Cold Air Intake System produces horsepower and torque gains by replacing your vehicle's restrictive factory air filter and air intake housing. This air intake system was designed, tuned and dyno-tested to fit specific models. Air enters the system through an oversized AEM Dryflow synthetic washable air filter for outstanding air flow, filtration and performance. The air filter is located in the original air box space and is protected by a heat shield which is designed to reduce intake air temperature and increase horsepower. The air intake tube is constructed from mandrel-bent aluminum featuring a durable gunmetal gray powder coated finish. This air intake system was developed to accommodate the engine's factory emissions control devices including the mass airflow sensor and breather tube. The tapered cylinder shaped AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). The air intake system is easy to install with commonly available tools and it is backed by AEM's Lifetime Limited Warranty. Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the vehicle applications to determine the legal status for each vehicle.Installation InstructionsUser 1This Part Fits: Year Make Model Submodel 2017-2018 Mazda 3 Grand Touring 2014-2016 Mazda 3 s Grand Touring 2014-2016 Mazda 3 s Touring 2017-2018 Mazda 3 Touring 2014-2020 Mazda 6 Grand Touring 2018-2020 Mazda 6 Signature 2014-2021 Mazda 6 Sport 2014-2021 Mazda 6 Touring 2017 Mazda CX-5 Grand Select 2015-2017 Mazda CX-5 Grand Touring 2015-2017 Mazda CX-5 Sport 2015-2017 Mazda CX-5 Touring

The AEM 21-823DS is a twin intake system designed for some Infinity Q70 models. The factory layout of this vehicle has individual throttle bodies for each bank of cylinders so each side has its own air intake system. This AEM air intake system replaces both the left and right factory air box, tube, and filter. This system includes the heat shield, intake tube, and AEM dryflow air filter on both left and right sides. The cone shaped AEM Dryflow air filters are made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). Both factory MAF sensors mount directly on the intake tube. The heatshield also has a rubberized edge trim to better isolate air from engine bay heat. The air intake system is backed by AEM's Lifetime Limited Warranty. Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the 21-823DS vehicle applications to determine the legal status for each vehicle.Technical DrawingInstallation InstructionsThis Part Fits: Year Make Model Submodel 2011-2013 INFINITI M37 Base 2011-2013 INFINITI M37 X 2014-2017 INFINITI Q70 3.7

This Performance Air Intake System allows your engine to breath more air compared to the restrictive factory air intake housing. It is designed, tuned, and dyno-tested to produce more horsepower and torque. The cone-shaped AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). A custom shaped heat shield with edge trim lining is included to keep engine bay heat from the air intake. The air intake tube is constructed from mandrel-bent aluminum featuring a durable gunmetal gray powder coated finish. This air intake system is backed by AEM's Lifetime Limited Warranty. Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the vehicle applications to determine the legal status for each vehicle.Installation InstructionsTechnical DrawingThis Part Fits: Year Make Model Submodel 2015,2017-2019 BMW X1 sDrive28i 2015-2019 BMW X1 xDrive28i 2019 BMW X2 M35i 2018-2019 BMW X2 sDrive28i 2018-2019 BMW X2 xDrive28i 2014-2020 Mini Cooper Base 2016-2020 Mini Cooper John Cooper Works 2014-2020 Mini Cooper S 2017-2019 Mini Cooper Clubman ALL4 2016-2019 Mini Cooper Clubman Base 2019 Mini Cooper Clubman John Cooper Works ALL4 2019 Mini Cooper Clubman S 2019 Mini Cooper Clubman S ALL4 2019-2020 Mini Cooper Countryman ALL4 2019-2020 Mini Cooper Countryman Base 2018-2019 Mini Cooper Countryman John Cooper Works ALL4 2019-2020 Mini Cooper Countryman S 2019-2020 Mini Cooper Countryman S ALL4 2019-2020 Mini Cooper Countryman S E ALL4

The AEM 21-773C Performance Cold Air Intake System produces horsepower and torque gains by replacing your vehicle's restrictive factory air filter and air intake housing. This air intake system was designed, tuned and dyno-tested to fit specific Mazda Mazda3 models. Air enters the system through an oversized AEM Dryflow synthetic washable air filter for outstanding air flow, filtration and performance. The air filter is located in the original airbox space and is protected by a heat shield which is designed to reduce intake air temperature and adapts to the factory cold air scoop. The air intake tube is constructed from mandrel-bent aluminum featuring a durable gunmetal gray powder coated finish. This air intake system was developed to accommodate the engine's factory emissions control devices including the mass air sensor and engine breather hose. The tapered cylinder shaped AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). The air intake system is easy to install with commonly available tools and it is backed by AEM's Lifetime Limited Warranty. Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the 21-773C vehicle applications to determine the legal status for each vehicle.Installation InstructionsUser 1This Part Fits: Year Make Model Submodel 2015-2016 Mazda 3 i Grand Touring 2015-2016 Mazda 3 I Sport 2015 Mazda 3 i SV 2015-2016 Mazda 3 I Touring 2017-2018 Mazda 3 Sport 2017-2018 Mazda 3 Touring

AEM Cold Air Intake Systems are designed to produce horsepower and torque gains. They replace the restrictive factory airbox and air filter to give you better performance and better engine sound. AEM cold air intakes relocate the air filter outside the engine compartment so cooler air can be fed into your engine. Cooler air carries more oxygen, which translates into a more intense explosion in the combustion chamber for more horsepower and torque. AEM Cold Air Intakes include an oversized AEM Dryflow synthetic washable air filter for outstanding air flow, filtration, and performance while allowing easy oil-free cleaning. They include a mandrel-bent aluminum intake tube and high quality hardware designed to reduce restriction and reduce intake temperature. The design and components of each intake system vary so consult the installation instructions for more information on the contents of each part number.Installation InstructionsUser 1This Part Fits: Year Make Model Submodel 2015-2016 Subaru WRX Base 2015-2016 Subaru WRX Limited 2015-2016 Subaru WRX Premium 2015-2017 Subaru WRX STI Base 2015 Subaru WRX STI Launch Edition 2015-2017 Subaru WRX STI Limited 2016 Subaru WRX STI Series.HyperBlue

This Performance Air Intake System allows your engine to breathe more air compared to the restrictive factory air intake housing. It is designed, tuned and dyno-tested to produce more horsepower and torque. Air enters the system through an oversized AEM Dryflow synthetic washable air filter for outstanding air flow, filtration and performance. The air intake tube is constructed from mandrel-bent aluminum featuring a durable gunmetal gray powder coated finish. A custom shaped heat shield with lid is included. The tapered cylinder shaped AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). This Air Intake System is backed by AEM's Lifetime Limited Warranty. Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the vehicle applications to determine the legal status for each vehicle.User 1Installation InstructionsInstallation InstructionsThis Part Fits: Year Make Model Submodel 2016-2017 Hyundai Sonata Base 2015 Hyundai Sonata Hybrid 2015 Hyundai Sonata Hybrid Limited 2015-2019 Hyundai Sonata Limited 2015-2019 Hyundai Sonata SE 2018-2019 Hyundai Sonata SEL 2015-2019 Hyundai Sonata Sport 2015-2018 Kia Optima EX 2016 Kia Optima Hybrid 2015-2016 Kia Optima Hybrid EX 2015 Kia Optima Hybrid LX 2015-2020 Kia Optima LX 2018-2020 Kia Optima S 2020 Kia Optima Special Edition 2015 Kia Optima SX

This Performance Air Intake System allows your engine to breathe more air compared to the restrictive factory air intake housing. It is designed, tuned and dyno-tested to produce more horsepower and torque. Air enters the system through an oversized AEM Dryflow synthetic washable air filter for outstanding air flow, filtration and performance. The air intake tube is constructed from mandrel-bent aluminum featuring a durable gunmetal gray powder coated finish. A custom shaped heat shield with a carbon fiber lid is included. The tapered cylinder shaped AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). This Air Intake System is backed by AEM's Lifetime Limited Warranty. Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the 21-780C vehicle applications to determine the legal status for each vehicle.Installation InstructionsTechnical DrawingThis Part Fits: Year Make Model Submodel 2022-2023 Lexus IS500 F Sport Performance 2022 Lexus IS500 F Sport Performance Launch Edition 2022-2023 Lexus IS500 F Sport Performance Premium 2015-2018 Lexus RC F Base