Launching harder, reducing wheel hop, and adding cornering consistency to your 1978-1987 GM G-body is easy with lower control arms from BMR Suspension. Stock stamped steel control arms with soft rubber bushings deflect under load and absorb power instead of transferring it to the tires. BMR?s polyurethane, non-adjustable tubular control arms for A-bodies (TCA039) are manufactured from heavy-duty 1? inch DOM steel tubing. This design gives you a strong control arm that greatly improves performance. Two-inch greasable, 95-durometer bushings add a solid, more responsive feel over the stock rubber bushings. BMR?s bushings are internally fluted, which keeps grease in the bushing, even under heavy load. These flutes also direct grease to the outer edge of the bushing, keeping the thrust surface lubricated. This efficient lubrication ensures quiet, reliable operation over the life of the bushings.Application GuideThis Part Fits: Year Make Model Submodel 1978-1987 Buick Regal Base 1982-1983 Buick Regal Estate Wagon 1987 Buick Regal GNX 1984-1987 Buick Regal Grand National 1978-1987 Buick Regal Limited 1982 Buick Regal Limited Turbo 1978-1982 Buick Regal Sport 1983-1986 Buick Regal T-Type 1978-1981 Chevrolet Malibu Base 1978-1983 Chevrolet Malibu Classic 1978-1980 Chevrolet Malibu Classic Estate 1978-1981 Chevrolet Malibu Classic Landau 1979-1980 Chevrolet Malibu Classic Sport 1979-1980 Chevrolet Malibu Estate 1979 Chevrolet Malibu Landau 1979 Chevrolet Malibu Police 1979-1980 Chevrolet Malibu Sport 1980 Oldsmobile Cutlass Base 1980-1981 Oldsmobile Cutlass Brougham 1980-1981 Oldsmobile Cutlass LS 1978-1979 Oldsmobile Cutlass Vista Cruiser 1979 Oldsmobile Cutlass Vista Cruiser Brougham 1978-1987 Pontiac Grand Prix Base 1981-1987 Pontiac Grand Prix Brougham 1984-1987 Pontiac Grand Prix LE 1978-1983 Pontiac Grand Prix LJ 1978-1980 Pontiac Grand Prix SJ

Fits 1978-1987 GM G-Body;Eliminates upper A-arm deflection;Improves steering feel and response for normal and performance driving;Increased high-speed stability;Fixture welded for precise fit;Dual-offset cross-shafts;Requires less shim stack for negative camber than OE arms;Internally fluted, high durometer polyurethane bushings;Adds additional headers clearance;Pre-assembled with new polyurethane bumpstops;Includes new upper ball joints;Durable powdercoat finish;Proudly made in the U.S.A.Application GuideThis Part Fits: Year Make Model Submodel 1978-1987 Buick Regal Base 1982-1983 Buick Regal Estate Wagon 1987 Buick Regal GNX 1984-1987 Buick Regal Grand National 1978-1987 Buick Regal Limited 1982 Buick Regal Limited Turbo 1978-1982 Buick Regal Sport 1983-1986 Buick Regal T-Type 1978-1981 Chevrolet Malibu Base 1978-1983 Chevrolet Malibu Classic 1978-1980 Chevrolet Malibu Classic Estate 1978-1981 Chevrolet Malibu Classic Landau 1979-1980 Chevrolet Malibu Classic Sport 1979-1980 Chevrolet Malibu Estate 1979 Chevrolet Malibu Landau 1979 Chevrolet Malibu Police 1979-1980 Chevrolet Malibu Sport 1979,1981-1987 Chevrolet Monte Carlo Base 1983 Chevrolet Monte Carlo CL 1978-1981 Chevrolet Monte Carlo Landau 1986-1987 Chevrolet Monte Carlo LS 1978,1980 Chevrolet Monte Carlo Sport 1983-1987 Chevrolet Monte Carlo SS 1980 Oldsmobile Cutlass Base 1980-1981 Oldsmobile Cutlass Brougham 1980-1981 Oldsmobile Cutlass LS 1978-1979 Oldsmobile Cutlass Vista Cruiser 1979 Oldsmobile Cutlass Vista Cruiser Brougham 1978-1987 Pontiac Grand Prix Base 1981-1987 Pontiac Grand Prix Brougham 1984-1987 Pontiac Grand Prix LE 1978-1983 Pontiac Grand Prix LJ 1978-1980 Pontiac Grand Prix SJ

Fits 1978-1987 GM G-Body;Eliminates upper A-arm deflection;Improves steering feel and response for normal and performance driving;Increased high-speed stability;Fixture welded for precise fit;Dual-offset cross-shafts;Requires less shim stack for negative camber than OE arms;Internally fluted, high durometer polyurethane bushings;Adds additional headers clearance;Pre-assembled with new polyurethane bumpstops;Includes new upper ball joints;Durable powdercoat finish;Proudly made in the U.S.A.Application GuideThis Part Fits: Year Make Model Submodel 1978-1987 Buick Regal Base 1982-1983 Buick Regal Estate Wagon 1987 Buick Regal GNX 1984-1987 Buick Regal Grand National 1978-1987 Buick Regal Limited 1982 Buick Regal Limited Turbo 1978-1982 Buick Regal Sport 1983-1986 Buick Regal T-Type 1978-1981 Chevrolet Malibu Base 1978-1983 Chevrolet Malibu Classic 1978-1980 Chevrolet Malibu Classic Estate 1978-1981 Chevrolet Malibu Classic Landau 1979-1980 Chevrolet Malibu Classic Sport 1979-1980 Chevrolet Malibu Estate 1979 Chevrolet Malibu Landau 1979 Chevrolet Malibu Police 1979-1980 Chevrolet Malibu Sport 1979,1981-1987 Chevrolet Monte Carlo Base 1983 Chevrolet Monte Carlo CL 1978-1981 Chevrolet Monte Carlo Landau 1986-1987 Chevrolet Monte Carlo LS 1978,1980 Chevrolet Monte Carlo Sport 1983-1987 Chevrolet Monte Carlo SS 1980 Oldsmobile Cutlass Base 1980-1981 Oldsmobile Cutlass Brougham 1980-1981 Oldsmobile Cutlass LS 1978-1979 Oldsmobile Cutlass Vista Cruiser 1979 Oldsmobile Cutlass Vista Cruiser Brougham 1978-1987 Pontiac Grand Prix Base 1981-1987 Pontiac Grand Prix Brougham 1984-1987 Pontiac Grand Prix LE 1978-1983 Pontiac Grand Prix LJ 1978-1980 Pontiac Grand Prix SJ

BMRs polyurethane bushings are designed to be compliant enough to give you a comfortable ride and absorb NVH, while remaining firm enough to stand up to high loads of any performance environment. The bushings easily handle the high compression loads of aggressive launches and hard acceleration, yet offer plenty of articulation for great handling. The reinforcement braces provide additional strength to the rear suspension for a more responsive driving experience. This product is the perfect upgrade for the enthusiast looking to improve performance, while maintaining acceptable NVH levels and ride quality. When performance is a must, rely on BMR Suspension!BMR Suspensions Rear Suspension Kits are available in black hammertone and red powdercoat for long-lasting good looks. Installation time is about 2-3 hours. Proudly made in the U.S.A.!This Part Fits: Year Make Model Submodel 1978-1987 Buick Regal Base 1982-1983 Buick Regal Estate Wagon 1987 Buick Regal GNX 1984-1987 Buick Regal Grand National 1978-1987 Buick Regal Limited 1982 Buick Regal Limited Turbo 1978-1982 Buick Regal Sport 1983-1986 Buick Regal T-Type 1978-1981 Chevrolet Malibu Base 1978-1983 Chevrolet Malibu Classic 1978-1980 Chevrolet Malibu Classic Estate 1978-1981 Chevrolet Malibu Classic Landau 1979-1980 Chevrolet Malibu Classic Sport 1979-1980 Chevrolet Malibu Estate 1979 Chevrolet Malibu Landau 1979 Chevrolet Malibu Police 1979-1980 Chevrolet Malibu Sport 1980 Oldsmobile Cutlass Base 1980-1981 Oldsmobile Cutlass Brougham 1980-1981 Oldsmobile Cutlass LS 1978-1979 Oldsmobile Cutlass Vista Cruiser 1979 Oldsmobile Cutlass Vista Cruiser Brougham 1978-1987 Pontiac Grand Prix Base 1981-1987 Pontiac Grand Prix Brougham 1984-1987 Pontiac Grand Prix LE 1978-1983 Pontiac Grand Prix LJ 1978-1980 Pontiac Grand Prix SJ

BMRs polyurethane bushings are designed to be compliant enough to give you a comfortable ride and absorb NVH, while remaining firm enough to stand up to high loads of any performance environment. The bushings easily handle the high compression loads of aggressive launches and hard acceleration, yet offer plenty of articulation for great handling. The reinforcement braces provide additional strength to the rear suspension for a more responsive driving experience. This product is the perfect upgrade for the enthusiast looking to improve performance, while maintaining acceptable NVH levels and ride quality. When performance is a must, rely on BMR Suspension!BMR Suspensions Rear Suspension Kits are available in black hammertone and red powdercoat for long-lasting good looks. Installation time is about 2-3 hours. Proudly made in the U.S.A.!This Part Fits: Year Make Model Submodel 1978-1987 Buick Regal Base 1982-1983 Buick Regal Estate Wagon 1987 Buick Regal GNX 1984-1987 Buick Regal Grand National 1978-1987 Buick Regal Limited 1982 Buick Regal Limited Turbo 1978-1982 Buick Regal Sport 1983-1986 Buick Regal T-Type 1978-1981 Chevrolet Malibu Base 1978-1983 Chevrolet Malibu Classic 1978-1980 Chevrolet Malibu Classic Estate 1978-1981 Chevrolet Malibu Classic Landau 1979-1980 Chevrolet Malibu Classic Sport 1979-1980 Chevrolet Malibu Estate 1979 Chevrolet Malibu Landau 1979 Chevrolet Malibu Police 1979-1980 Chevrolet Malibu Sport 1980 Oldsmobile Cutlass Base 1980-1981 Oldsmobile Cutlass Brougham 1980-1981 Oldsmobile Cutlass LS 1978-1979 Oldsmobile Cutlass Vista Cruiser 1979 Oldsmobile Cutlass Vista Cruiser Brougham 1978-1987 Pontiac Grand Prix Base 1981-1987 Pontiac Grand Prix Brougham 1984-1987 Pontiac Grand Prix LE 1978-1983 Pontiac Grand Prix LJ 1978-1980 Pontiac Grand Prix SJ

The adjustable design allows for fine-tuning of the pinion angle for proper driveline alignment. These are the perfect upgrade for the enthusiast looking to improve performance, while maintaining acceptable NVH levels and ride quality. When performance is a must, rely on BMR Suspension!BMR Suspensions UTCA007 on-car adjustable polyurethane upper control arms are available in red and black hammertone powdercoat for long-lasting good looks. Installation time is about 1-2 hours. Proudly made in the U.S.A.Control arm hardware kit RH003 (includes upper and lower control arm hardware - Highly Recommended) is also available.Application GuideThis Part Fits: Year Make Model Submodel 1978-1987 Buick Regal Base 1982-1983 Buick Regal Estate Wagon 1987 Buick Regal GNX 1984-1987 Buick Regal Grand National 1978-1987 Buick Regal Limited 1982 Buick Regal Limited Turbo 1978-1982 Buick Regal Sport 1983-1986 Buick Regal T-Type 1978-1981 Chevrolet Malibu Base 1978-1983 Chevrolet Malibu Classic 1978-1980 Chevrolet Malibu Classic Estate 1978-1981 Chevrolet Malibu Classic Landau 1979-1980 Chevrolet Malibu Classic Sport 1979-1980 Chevrolet Malibu Estate 1979 Chevrolet Malibu Landau 1979 Chevrolet Malibu Police 1979-1980 Chevrolet Malibu Sport 1980 Oldsmobile Cutlass Base 1980-1981 Oldsmobile Cutlass Brougham 1980-1981 Oldsmobile Cutlass LS 1978-1979 Oldsmobile Cutlass Vista Cruiser 1979 Oldsmobile Cutlass Vista Cruiser Brougham 1978-1987 Pontiac Grand Prix Base 1981-1987 Pontiac Grand Prix Brougham 1984-1987 Pontiac Grand Prix LE 1978-1983 Pontiac Grand Prix LJ 1978-1980 Pontiac Grand Prix SJ

The adjustable design allows for fine-tuning of the pinion angle for proper driveline alignment. These are the perfect upgrade for the enthusiast looking to improve performance, while maintaining acceptable NVH levels and ride quality. When performance is a must, rely on BMR Suspension!BMR Suspensions UTCA007 on-car adjustable polyurethane upper control arms are available in red and black hammertone powdercoat for long-lasting good looks. Installation time is about 1-2 hours. Proudly made in the U.S.A.Control arm hardware kit RH003 (includes upper and lower control arm hardware - Highly Recommended) is also available.Application GuideThis Part Fits: Year Make Model Submodel 1978-1987 Buick Regal Base 1982-1983 Buick Regal Estate Wagon 1987 Buick Regal GNX 1984-1987 Buick Regal Grand National 1978-1987 Buick Regal Limited 1982 Buick Regal Limited Turbo 1978-1982 Buick Regal Sport 1983-1986 Buick Regal T-Type 1978-1981 Chevrolet Malibu Base 1978-1983 Chevrolet Malibu Classic 1978-1980 Chevrolet Malibu Classic Estate 1978-1981 Chevrolet Malibu Classic Landau 1979-1980 Chevrolet Malibu Classic Sport 1979-1980 Chevrolet Malibu Estate 1979 Chevrolet Malibu Landau 1979 Chevrolet Malibu Police 1979-1980 Chevrolet Malibu Sport 1980 Oldsmobile Cutlass Base 1980-1981 Oldsmobile Cutlass Brougham 1980-1981 Oldsmobile Cutlass LS 1978-1979 Oldsmobile Cutlass Vista Cruiser 1979 Oldsmobile Cutlass Vista Cruiser Brougham 1978-1987 Pontiac Grand Prix Base 1981-1987 Pontiac Grand Prix Brougham 1984-1987 Pontiac Grand Prix LE 1978-1983 Pontiac Grand Prix LJ 1978-1980 Pontiac Grand Prix SJ

BMR 78-87 G-Body Upper Control Arms On-Car Adj. w/ Spherical Bearings - Black Hammertone

BMR 78-87 G-Body Upper Control Arms On-Car Adj. w/ Spherical Bearings - Red

Increase steering stability and reduce chassis deflection on your 1978-1987 G-Body with a front Chassis Brace from BMR Suspension. BMRs Chassis Brace (CB460) is designed to support and stiffen the factory G-Body chassis and front suspension. This brace firms up the G-Body chassis by adding loads of strength and support to the front frame that tends to flex, even with mild amounts of torque and horsepower. The BMR Chassis Brace is constructed from lightweight DOM steel tubing and laser cut 3/l6-inch steel plate to provide maximum strength without adding unnecessary bulk. BMR has designed the CB460 for street performance, drag race, and handling applications. This three-point brace is used to stiffen the front crossmember area on the GM G-body platform, providing extra rigidity to the front chassis and suspension. The CB460 also reduces unwanted vibration and noise associated with the G-Body platform. All grade 8 hardware needed for installation is included and is 100% bolt-in, meaning it can be easily installed with simple hand tools with no welding or cutting required. When performance is a must, rely on BMR Suspension!BMR Suspensions CB460 Rear Front Chassis Brace is available in black hammertone and red powdercoat for long-lasting good looks. Installation time is about 1 hour. Proudly built in America with American steel!Application GuideThis Part Fits: Year Make Model Submodel 1978-1987 Buick Regal Base 1982-1983 Buick Regal Estate Wagon 1987 Buick Regal GNX 1984-1987 Buick Regal Grand National 1978-1987 Buick Regal Limited 1982 Buick Regal Limited Turbo 1978-1982 Buick Regal Sport 1983-1986 Buick Regal T-Type 1978-1981 Chevrolet Malibu Base 1978-1983 Chevrolet Malibu Classic 1978-1980 Chevrolet Malibu Classic Estate 1978-1981 Chevrolet Malibu Classic Landau 1979-1980 Chevrolet Malibu Classic Sport 1979-1980 Chevrolet Malibu Estate 1979 Chevrolet Malibu Landau 1979 Chevrolet Malibu Police 1979-1980 Chevrolet Malibu Sport 1980 Oldsmobile Cutlass Base 1980-1981 Oldsmobile Cutlass Brougham 1980-1981 Oldsmobile Cutlass LS 1978-1979 Oldsmobile Cutlass Vista Cruiser 1979 Oldsmobile Cutlass Vista Cruiser Brougham 1978-1987 Pontiac Grand Prix Base 1981-1987 Pontiac Grand Prix Brougham 1984-1987 Pontiac Grand Prix LE 1978-1983 Pontiac Grand Prix LJ 1978-1980 Pontiac Grand Prix SJ

Fits 1978-1987 GM G-Body;Delrin bushings eliminate upper A-arm deflection;Improves steering feel and response for normal and performance driving;Increased high-speed stability;Laser-cut, CNC-formed plate steel braces for extra strength;Fixture welded for precise fit;Dual-offset cross-shafts;Requires less shim stack for negative camber than OE arms;Internally fluted, Delrin bushings;Two additional degrees of positive caster built into A-arms;Additional header clearance;Pre-assembled with new polyurethane bumpstops;Includes new upper ball joints;Durable powdercoat finish;Proudly designed in the U.S.A.;Proudly made in the U.S.A.Application GuideThis Part Fits: Year Make Model Submodel 1978-1987 Buick Regal Base 1982-1983 Buick Regal Estate Wagon 1987 Buick Regal GNX 1984-1987 Buick Regal Grand National 1978-1987 Buick Regal Limited 1982 Buick Regal Limited Turbo 1978-1982 Buick Regal Sport 1983-1986 Buick Regal T-Type 1978-1981 Chevrolet Malibu Base 1978-1983 Chevrolet Malibu Classic 1978-1980 Chevrolet Malibu Classic Estate 1978-1981 Chevrolet Malibu Classic Landau 1979-1980 Chevrolet Malibu Classic Sport 1979-1980 Chevrolet Malibu Estate 1979 Chevrolet Malibu Landau 1979 Chevrolet Malibu Police 1979-1980 Chevrolet Malibu Sport 1979,1981-1987 Chevrolet Monte Carlo Base 1983 Chevrolet Monte Carlo CL 1978-1981 Chevrolet Monte Carlo Landau 1986-1987 Chevrolet Monte Carlo LS 1978,1980 Chevrolet Monte Carlo Sport 1983-1987 Chevrolet Monte Carlo SS 1980 Oldsmobile Cutlass Base 1980-1981 Oldsmobile Cutlass Brougham 1980-1981 Oldsmobile Cutlass LS 1978-1979 Oldsmobile Cutlass Vista Cruiser 1979 Oldsmobile Cutlass Vista Cruiser Brougham 1978-1987 Pontiac Grand Prix Base 1981-1987 Pontiac Grand Prix Brougham 1984-1987 Pontiac Grand Prix LE 1978-1983 Pontiac Grand Prix LJ 1978-1980 Pontiac Grand Prix SJ

Fits 1978-1987 GM G-Body;Delrin bushings eliminate upper A-arm deflection;Improves steering feel and response for normal and performance driving;Increased high-speed stability;Laser-cut, CNC-formed plate steel braces for extra strength;Fixture welded for precise fit;Dual-offset cross-shafts;Requires less shim stack for negative camber than OE arms;Internally fluted, Delrin bushings;Two additional degrees of positive caster built into A-arms;Additional header clearance;Pre-assembled with new polyurethane bumpstops;Includes new upper ball joints;Durable powdercoat finish;Proudly designed in the U.S.A.;Proudly made in the U.S.A.Application GuideThis Part Fits: Year Make Model Submodel 1978-1987 Buick Regal Base 1982-1983 Buick Regal Estate Wagon 1987 Buick Regal GNX 1984-1987 Buick Regal Grand National 1978-1987 Buick Regal Limited 1982 Buick Regal Limited Turbo 1978-1982 Buick Regal Sport 1983-1986 Buick Regal T-Type 1978-1981 Chevrolet Malibu Base 1978-1983 Chevrolet Malibu Classic 1978-1980 Chevrolet Malibu Classic Estate 1978-1981 Chevrolet Malibu Classic Landau 1979-1980 Chevrolet Malibu Classic Sport 1979-1980 Chevrolet Malibu Estate 1979 Chevrolet Malibu Landau 1979 Chevrolet Malibu Police 1979-1980 Chevrolet Malibu Sport 1979,1981-1987 Chevrolet Monte Carlo Base 1983 Chevrolet Monte Carlo CL 1978-1981 Chevrolet Monte Carlo Landau 1986-1987 Chevrolet Monte Carlo LS 1978,1980 Chevrolet Monte Carlo Sport 1983-1987 Chevrolet Monte Carlo SS 1980 Oldsmobile Cutlass Base 1980-1981 Oldsmobile Cutlass Brougham 1980-1981 Oldsmobile Cutlass LS 1978-1979 Oldsmobile Cutlass Vista Cruiser 1979 Oldsmobile Cutlass Vista Cruiser Brougham 1978-1987 Pontiac Grand Prix Base 1981-1987 Pontiac Grand Prix Brougham 1984-1987 Pontiac Grand Prix LE 1978-1983 Pontiac Grand Prix LJ 1978-1980 Pontiac Grand Prix SJ

Fits 1978-1987 GM G-Body;Delrin bushings eliminate upper A-arm deflection;Improves steering feel and response for normal and performance driving;Increased high-speed stability;Laser-cut, CNC-formed plate steel braces for extra strength;Fixture welded for precise fit;Dual-offset cross-shafts;Requires less shim stack for negative camber than OE arms;Internally fluted, Delrin bushings;Two additional degrees of positive caster built into A-arms;Additional header clearance;Pre-assembled with new polyurethane bumpstops;Includes new upper ball joints;Durable powdercoat finish;Proudly designed in the U.S.A.;Proudly made in the U.S.A.Application GuideThis Part Fits: Year Make Model Submodel 1978-1987 Buick Regal Base 1982-1983 Buick Regal Estate Wagon 1987 Buick Regal GNX 1984-1987 Buick Regal Grand National 1978-1987 Buick Regal Limited 1982 Buick Regal Limited Turbo 1978-1982 Buick Regal Sport 1983-1986 Buick Regal T-Type 1978-1981 Chevrolet Malibu Base 1978-1983 Chevrolet Malibu Classic 1978-1980 Chevrolet Malibu Classic Estate 1978-1981 Chevrolet Malibu Classic Landau 1979-1980 Chevrolet Malibu Classic Sport 1979-1980 Chevrolet Malibu Estate 1979 Chevrolet Malibu Landau 1979 Chevrolet Malibu Police 1979-1980 Chevrolet Malibu Sport 1979,1981-1987 Chevrolet Monte Carlo Base 1983 Chevrolet Monte Carlo CL 1978-1981 Chevrolet Monte Carlo Landau 1986-1987 Chevrolet Monte Carlo LS 1978,1980 Chevrolet Monte Carlo Sport 1983-1987 Chevrolet Monte Carlo SS 1980 Oldsmobile Cutlass Base 1980-1981 Oldsmobile Cutlass Brougham 1980-1981 Oldsmobile Cutlass LS 1978-1979 Oldsmobile Cutlass Vista Cruiser 1979 Oldsmobile Cutlass Vista Cruiser Brougham 1978-1987 Pontiac Grand Prix Base 1981-1987 Pontiac Grand Prix Brougham 1984-1987 Pontiac Grand Prix LE 1978-1983 Pontiac Grand Prix LJ 1978-1980 Pontiac Grand Prix SJ

Fits 1978-1987 GM G-Body;Delrin bushings eliminate upper A-arm deflection;Improves steering feel and response for normal and performance driving;Increased high-speed stability;Laser-cut, CNC-formed plate steel braces for extra strength;Fixture welded for precise fit;Dual-offset cross-shafts;Requires less shim stack for negative camber than OE arms;Internally fluted, Delrin bushings;Two additional degrees of positive caster built into A-arms;Additional header clearance;Pre-assembled with new polyurethane bumpstops;Includes new upper ball joints;Durable powdercoat finish;Proudly designed in the U.S.A.;Proudly made in the U.S.A.Application GuideThis Part Fits: Year Make Model Submodel 1978-1987 Buick Regal Base 1982-1983 Buick Regal Estate Wagon 1987 Buick Regal GNX 1984-1987 Buick Regal Grand National 1978-1987 Buick Regal Limited 1982 Buick Regal Limited Turbo 1978-1982 Buick Regal Sport 1983-1986 Buick Regal T-Type 1978-1981 Chevrolet Malibu Base 1978-1983 Chevrolet Malibu Classic 1978-1980 Chevrolet Malibu Classic Estate 1978-1981 Chevrolet Malibu Classic Landau 1979-1980 Chevrolet Malibu Classic Sport 1979-1980 Chevrolet Malibu Estate 1979 Chevrolet Malibu Landau 1979 Chevrolet Malibu Police 1979-1980 Chevrolet Malibu Sport 1979,1981-1987 Chevrolet Monte Carlo Base 1983 Chevrolet Monte Carlo CL 1978-1981 Chevrolet Monte Carlo Landau 1986-1987 Chevrolet Monte Carlo LS 1978,1980 Chevrolet Monte Carlo Sport 1983-1987 Chevrolet Monte Carlo SS 1980 Oldsmobile Cutlass Base 1980-1981 Oldsmobile Cutlass Brougham 1980-1981 Oldsmobile Cutlass LS 1978-1979 Oldsmobile Cutlass Vista Cruiser 1979 Oldsmobile Cutlass Vista Cruiser Brougham 1978-1987 Pontiac Grand Prix Base 1981-1987 Pontiac Grand Prix Brougham 1984-1987 Pontiac Grand Prix LE 1978-1983 Pontiac Grand Prix LJ 1978-1980 Pontiac Grand Prix SJ

Fits 1979-2004 Mustangs;Manufactured from 1.25-inch heavy-duty DOM tubing ;Manufactured from 0.179-inch laser-cut steel plate;Heavy-duty Teflon-lined rod ends;88-durometer greaseable polyurethane bushings;Includes Grade 8 Hardware;Weld-on design ensures durability on the track;Drastically reduces body roll;Transfers more power to the ground;Massive increase in sway bar rate over stock sway bar, depending on year and model;Sway bar rate varies from 1593-2724 lbs/in, depending on mounting hole used;Three-way adjustable for street and track use;Adjustability allows for fine-tuning of suspension;Available in red or black hammertone powder coat for long-lasting good looks;2-3 hour installation time;Proudly designed in the USA!;Proudly made in the USA!Application GuideThis Part Fits: Year Make Model Submodel 1979-1981,1994-2004 Ford Mustang Base 1981 Ford Mustang Cobra 1979-1981 Ford Mustang Ghia 1982-1983 Ford Mustang GL 1982-1983 Ford Mustang GLX 1982-2004 Ford Mustang GT 2001 Ford Mustang GT Bullitt 1984 Ford Mustang GT-350 20th Anniversary 1995 Ford Mustang GTS 1982-1984 Ford Mustang L 1984-1993 Ford Mustang LX 2003-2004 Ford Mustang Mach 1 1984-1986 Ford Mustang SVO 1993-1999,2001,2003-2004 Ford Mustang SVT Cobra 2003 Ford Mustang SVT Cobra 10th Anniversary 1993,1995,2000 Ford Mustang SVT Cobra R 1983 Ford Mustang Turbo GT

Fits 1979-2004 Mustangs;Manufactured from 1.25-inch heavy-duty DOM tubing ;Manufactured from 0.179-inch laser-cut steel plate;Heavy-duty Teflon-lined rod ends;88-durometer greaseable polyurethane bushings;Includes Grade 8 Hardware;Weld-on design ensures durability on the track;Drastically reduces body roll;Transfers more power to the ground;Massive increase in sway bar rate over stock sway bar, depending on year and model;Sway bar rate varies from 1593-2724 lbs/in, depending on mounting hole used;Three-way adjustable for street and track use;Adjustability allows for fine-tuning of suspension;Available in red or black hammertone powder coat for long-lasting good looks;2-3 hour installation time;Proudly designed in the USA!;Proudly made in the USA!Application GuideThis Part Fits: Year Make Model Submodel 1979-1981,1994-2004 Ford Mustang Base 1981 Ford Mustang Cobra 1979-1981 Ford Mustang Ghia 1982-1983 Ford Mustang GL 1982-1983 Ford Mustang GLX 1982-2004 Ford Mustang GT 2001 Ford Mustang GT Bullitt 1984 Ford Mustang GT-350 20th Anniversary 1995 Ford Mustang GTS 1982-1984 Ford Mustang L 1984-1993 Ford Mustang LX 2003-2004 Ford Mustang Mach 1 1984-1986 Ford Mustang SVO 1993-1999,2001,2003-2004 Ford Mustang SVT Cobra 2003 Ford Mustang SVT Cobra 10th Anniversary 1993,1995,2000 Ford Mustang SVT Cobra R 1983 Ford Mustang Turbo GT

Fits 1979-2004 Mustangs;Manufactured from 1.375-inch heavy-duty DOM tubing ;Manufactured from 0.179-inch laser-cut steel plate;Heavy-duty Teflon-lined rod ends;88-durometer greaseable polyurethane bushings;Includes Grade 8 Hardware;Weld-on design ensures durability on the track;Eliminates body roll;Transfers more power to the ground;Massive increase in sway bar rate over stock sway bar, depending on year and model;Sway bar rate varies from 2922-4734 lbs/in, depending on mounting hole used;Three-way adjustable for street and track use;Adjustability allows for fine-tuning of suspension;Available in red or black hammertone powder coat for long-lasting good looks;2-3 hour installation time;Proudly designed in the USA!;Proudly made in the USA!This Part Fits: Year Make Model Submodel 1979-1981,1994-2004 Ford Mustang Base 1981 Ford Mustang Cobra 1979-1981 Ford Mustang Ghia 1982-1983 Ford Mustang GL 1982-1983 Ford Mustang GLX 1982-2004 Ford Mustang GT 2001 Ford Mustang GT Bullitt 1984 Ford Mustang GT-350 20th Anniversary 1995 Ford Mustang GTS 1982-1984 Ford Mustang L 1984-1993 Ford Mustang LX 1984-1986 Ford Mustang SVO 1993-1999,2001,2003-2004 Ford Mustang SVT Cobra 2003 Ford Mustang SVT Cobra 10th Anniversary 1993,1995,2000 Ford Mustang SVT Cobra R 1983 Ford Mustang Turbo GT

Fits 1979-2004 Mustangs;Manufactured from 1.375-inch heavy-duty DOM tubing ;Manufactured from 0.179-inch laser-cut steel plate;Heavy-duty Teflon-lined rod ends;88-durometer greaseable polyurethane bushings;Includes Grade 8 Hardware;Weld-on design ensures durability on the track;Eliminates body roll;Transfers more power to the ground;Massive increase in sway bar rate over stock sway bar, depending on year and model;Sway bar rate varies from 2922-4734 lbs/in, depending on mounting hole used;Three-way adjustable for street and track use;Adjustability allows for fine-tuning of suspension;Available in red or black hammertone powder coat for long-lasting good looks;2-3 hour installation time;Proudly designed in the USA!;Proudly made in the USA!Application GuideThis Part Fits: Year Make Model Submodel 1979-1981,1994-2004 Ford Mustang Base 1981 Ford Mustang Cobra 1979-1981 Ford Mustang Ghia 1982-1983 Ford Mustang GL 1982-1983 Ford Mustang GLX 1982-2004 Ford Mustang GT 2001 Ford Mustang GT Bullitt 1984 Ford Mustang GT-350 20th Anniversary 1995 Ford Mustang GTS 1982-1984 Ford Mustang L 1984-1993 Ford Mustang LX 1984-1986 Ford Mustang SVO 1993-1999,2001,2003-2004 Ford Mustang SVT Cobra 2003 Ford Mustang SVT Cobra 10th Anniversary 1993,1995,2000 Ford Mustang SVT Cobra R 1983 Ford Mustang Turbo GT

BMR 79-04 Ford Mustang Double Adj. Lower Control Arms - Black Hammertone

BMR 79-04 Ford Mustang Double Adj. Lower Control Arms - Red

Reduce chassis flex and increase the handling capabilities of your 1979-2004 Mustang with tubular, weld-on subframe connectors from BMR Suspension. The Fox chassis flexes dramatically, even with mild amounts of torque and horsepower. BMR?s subframe connectors are manufactured from heavy-duty 1 5/8-inch steel tubing with laser-cut CNC-formed 3/16-inch steel plates. This adds loads of strength in all the right places. These weld-on subframe connectors are engineered to considerably strengthen the chassis and reinforce the rear suspension. The SFC024s connect the front subframe and rear subframe, linking the front and rear of the chassis together.Application GuideThis Part Fits: Year Make Model Submodel 1979-1981,1994-2004 Ford Mustang Base 1981 Ford Mustang Cobra 1979-1981 Ford Mustang Ghia 1982-1983 Ford Mustang GL 1982-1983 Ford Mustang GLX 1982-2004 Ford Mustang GT 2001 Ford Mustang GT Bullitt 1984 Ford Mustang GT-350 20th Anniversary 1995 Ford Mustang GTS 1982-1984 Ford Mustang L 1984-1993 Ford Mustang LX 2003-2004 Ford Mustang Mach 1 1984-1986 Ford Mustang SVO 1993-1999,2001,2003-2004 Ford Mustang SVT Cobra 2003 Ford Mustang SVT Cobra 10th Anniversary 1993,1995,2000 Ford Mustang SVT Cobra R 1983 Ford Mustang Turbo GT

Reduce chassis flex and increase the handling capabilities of your 1979-2004 Mustang with tubular, weld-on subframe connectors from BMR Suspension. The Fox chassis flexes dramatically, even with mild amounts of torque and horsepower. BMR?s subframe connectors are manufactured from heavy-duty 1 5/8-inch steel tubing with laser-cut CNC-formed 3/16-inch steel plates. This adds loads of strength in all the right places. These weld-on subframe connectors are engineered to considerably strengthen the chassis and reinforce the rear suspension. The SFC024s connect the front subframe and rear subframe, linking the front and rear of the chassis together.Application GuideThis Part Fits: Year Make Model Submodel 1979-1981,1994-2004 Ford Mustang Base 1981 Ford Mustang Cobra 1979-1981 Ford Mustang Ghia 1982-1983 Ford Mustang GL 1982-1983 Ford Mustang GLX 1982-2004 Ford Mustang GT 2001 Ford Mustang GT Bullitt 1984 Ford Mustang GT-350 20th Anniversary 1995 Ford Mustang GTS 1982-1984 Ford Mustang L 1984-1993 Ford Mustang LX 2003-2004 Ford Mustang Mach 1 1984-1986 Ford Mustang SVO 1993-1999,2001,2003-2004 Ford Mustang SVT Cobra 2003 Ford Mustang SVT Cobra 10th Anniversary 1993,1995,2000 Ford Mustang SVT Cobra R 1983 Ford Mustang Turbo GT

There is nothing like the aggressive look of a car with the right stance! Over time, stock springs sag, get rusty, and simply wear out. BMR Suspension believes the right springs go beyond looks?your 1979-2004 Mustang needs to perform, too! All BMR springs are manufactured from chrome silicon high-tensile spring wire, and are cold wound on a CNC coiling machine. The CNC coiling head can adjust the spring diameter in real time to ensure that every spring is exactly the same. This guarantees that your right spring matches your left spring. Every BMR spring is compressed solid at the factory, not once, but twice. This gives the spring its permanent set, and guarantees no sag. BMR springs are stress-relieved at 750 degrees F, ensuring most stresses induced during the winding process are eliminated. All springs are then shot-peened to eliminate residual surface stresses. Many spring manufacturers skip this step, but BMR insists on this operation as part of our spring manufacturing process. Every spring is computer tested as the last step?every spring, not just a sample from each batch. Each spring is loaded in the spring tester at the factory, then compressed and the CNC load cell measures the force for a variety of spring lengths. This allows BMR to offer a LIFETIME WARRANTY against spring sag.Blending aesthetics and performance, BMR has designed the SP027 for the street performance crowd who want to use their cars in a variety of application. These springs will drop your 1979-2004 Ford Mustang 1-inch, and feature a fine-tuned spring rate to give you great handling and a smooth ride. The linear spring rate offers plenty of support, keeping the body flat and level in the corners, while remaining soft enough for a comfortable ride on any road. When performance and looks are a must, rely on BMR Suspension!BMR Suspensions SP027 lowering springs are available in red powdercoat for long-lasting good looks. Installation time is about 2-3 hours.Application GuideThis Part Fits: Year Make Model Submodel 1979-1981,1994-2004 Ford Mustang Base 1981 Ford Mustang Cobra 1979-1981 Ford Mustang Ghia 1982-1983 Ford Mustang GL 1982-1983 Ford Mustang GLX 1982-2004 Ford Mustang GT 2001 Ford Mustang GT Bullitt 1984 Ford Mustang GT-350 20th Anniversary 1995 Ford Mustang GTS 1982-1984 Ford Mustang L 1984-1993 Ford Mustang LX 2003-2004 Ford Mustang Mach 1 1984-1986 Ford Mustang SVO 1993-1999,2001,2003-2004 Ford Mustang SVT Cobra 2003 Ford Mustang SVT Cobra 10th Anniversary 1993,1995,2000 Ford Mustang SVT Cobra R 1983 Ford Mustang Turbo GT

Launching harder, reducing wheel hop, and adding cornering consistency to your 1979-2004 Ford Mustang is easy with upper control arms from BMR Suspension. Stock control arms with soft rubber bushings deflect under load and absorb power instead of transferring it to the tires. BMRs polyurethane, on-car adjustable tubular control arms for Mustangs (UTCA015) are manufactured from heavy-duty 1 5/8 inch, 0.120-inch wall DOM steel tubing. The center adjuster is CNC-machined from chrome-moly steel with rolled threads for the ultimate in strength and durability. The arms feature TIG-welded chrome-moly tube adapters. This design gives you a strong control arm that greatly improves performance. Spherical bearings offer the highest levels of strength and articulation. When the highest levels of performance are required, BMR uses heavy-duty Teflon-lines Viking Performance spherical bearings.BMR Suspension designed the UTCA015 to work well in street performance, drag race, and road race applications. The stock control arms flex under even light cornering loads giving you inconsistent handling characteristics. Combine this with soft bushings that have massive amounts of deflection and youre left with poor performance. The UTCA015s heavy-duty construction eliminates control arm flex, giving you much improved repeatability on the street, starting line, or in the corners. BMRs spherical bearings offer tons of articulation for great handling, whiles remaining strong enough to stand up to high loads of any performance environment. These are the perfect upgrade for the enthusiast looking for max performance at an affordable price. When performance is a must, rely on BMR Suspension!BMR Suspensions UTCA015 on-car adjustable spherical upper control arms are available in red and black hammertone powdercoat for long-lasting good looks. Installation time is about 1-2 hours. Proudly made in the U.S.A.This Part Fits: Year Make Model Submodel 1979-1981,1994-2004 Ford Mustang Base 1981 Ford Mustang Cobra 1979-1981 Ford Mustang Ghia 1982-1983 Ford Mustang GL 1982-1983 Ford Mustang GLX 1982-2004 Ford Mustang GT 2001 Ford Mustang GT Bullitt 1984 Ford Mustang GT-350 20th Anniversary 1995 Ford Mustang GTS 1982-1984 Ford Mustang L 1984-1993 Ford Mustang LX 2003-2004 Ford Mustang Mach 1 1984-1986 Ford Mustang SVO 1993-1999,2001,2003-2004 Ford Mustang SVT Cobra 2003 Ford Mustang SVT Cobra 10th Anniversary 1993,1995,2000 Ford Mustang SVT Cobra R 1983 Ford Mustang Turbo GT

Launching harder, reducing wheel hop, and adding cornering consistency to your 1979-2004 Ford Mustang is easy with upper control arms from BMR Suspension. Stock control arms with soft rubber bushings deflect under load and absorb power instead of transferring it to the tires. BMRs polyurethane, on-car adjustable tubular control arms for Mustangs (UTCA015) are manufactured from heavy-duty 1 5/8 inch, 0.120-inch wall DOM steel tubing. The center adjuster is CNC-machined from chrome-moly steel with rolled threads for the ultimate in strength and durability. The arms feature TIG-welded chrome-moly tube adapters. This design gives you a strong control arm that greatly improves performance. Spherical bearings offer the highest levels of strength and articulation. When the highest levels of performance are required, BMR uses heavy-duty Teflon-lines Viking Performance spherical bearings.BMR Suspension designed the UTCA015 to work well in street performance, drag race, and road race applications. The stock control arms flex under even light cornering loads giving you inconsistent handling characteristics. Combine this with soft bushings that have massive amounts of deflection and youre left with poor performance. The UTCA015s heavy-duty construction eliminates control arm flex, giving you much improved repeatability on the street, starting line, or in the corners. BMRs spherical bearings offer tons of articulation for great handling, whiles remaining strong enough to stand up to high loads of any performance environment. These are the perfect upgrade for the enthusiast looking for max performance at an affordable price. When performance is a must, rely on BMR Suspension!BMR Suspensions UTCA015 on-car adjustable spherical upper control arms are available in red and black hammertone powdercoat for long-lasting good looks. Installation time is about 1-2 hours. Proudly made in the U.S.A.This Part Fits: Year Make Model Submodel 1979-1981,1994-2004 Ford Mustang Base 1981 Ford Mustang Cobra 1979-1981 Ford Mustang Ghia 1982-1983 Ford Mustang GL 1982-1983 Ford Mustang GLX 1982-2004 Ford Mustang GT 2001 Ford Mustang GT Bullitt 1984 Ford Mustang GT-350 20th Anniversary 1995 Ford Mustang GTS 1982-1984 Ford Mustang L 1984-1993 Ford Mustang LX 2003-2004 Ford Mustang Mach 1 1984-1986 Ford Mustang SVO 1993-1999,2001,2003-2004 Ford Mustang SVT Cobra 2003 Ford Mustang SVT Cobra 10th Anniversary 1993,1995,2000 Ford Mustang SVT Cobra R 1983 Ford Mustang Turbo GT

BMR 79-04 Mustang Rear Coilover Conversion Kit w/ Control Arm Bracket - Black Hammertone

BMR 79-04 Mustang Rear Coilover Conversion Kit w/ Control Arm Bracket - Red

BMR 79-93 Fox Mustang Hardtop Only Weld-On Boxed Premium Subframe Connectors - Red

A-arms are one of the most important, yet overlooked suspension components. They are the direct link between the front wheels and the chassis. Any deflection causes a change in alignment, which results in poor performance and driving feel. Fabricated from heavy-duty 1.5-inch, 0.095-inch wall and 1.25-inch, 0.095-inch wall DOM tubing, deflection is eliminated with A-arms from BMR Suspension. BMR?s AA036 Lower A-arms are equipped with heavy-duty, Teflon-lined rod ends. BMR?s heavy-duty rod ends are designed to solidly link the A-arms to the body, eliminating deflection. Our rod ends will stand up to high loads of any performance environment, offering all of the bind-free suspension articulation needed for great handling.Application GuideThis Part Fits: Year Make Model Submodel 1979-1981 Ford Mustang Base 1981 Ford Mustang Cobra 1979-1981 Ford Mustang Ghia 1982-1983 Ford Mustang GL 1982-1983 Ford Mustang GLX 1982-1993 Ford Mustang GT 1984 Ford Mustang GT-350 20th Anniversary 1982-1984 Ford Mustang L 1984-1993 Ford Mustang LX 1984-1986 Ford Mustang SVO 1993 Ford Mustang SVT Cobra 1993 Ford Mustang SVT Cobra R 1983 Ford Mustang Turbo GT

A-arms are one of the most important, yet overlooked suspension components. They are the direct link between the front wheels and the chassis. Any deflection causes a change in alignment, which results in poor performance and driving feel. Fabricated from heavy-duty 1.5-inch, 0.095-inch wall and 1.25-inch, 0.095-inch wall DOM tubing, deflection is eliminated with A-arms from BMR Suspension. BMR?s AA035 Lower A-arms are equipped with greasable, 95-durometer polyurethane bushings. Polyurethane bushings add a solid, more responsive feel over the stock rubber bushings. BMR?s bushings are internally fluted, which allows grease to evenly coat the inner sleeve. These flutes also direct grease to the outer edge of the bushing, keeping the thrust surface lubricated. This efficient lubrication ensures quiet, reliable operation over the life of the bushings.Application GuideThis Part Fits: Year Make Model Submodel 1979-1981 Ford Mustang Base 1981 Ford Mustang Cobra 1979-1981 Ford Mustang Ghia 1982-1983 Ford Mustang GL 1982-1983 Ford Mustang GLX 1982-1993 Ford Mustang GT 1984 Ford Mustang GT-350 20th Anniversary 1982-1984 Ford Mustang L 1984-1993 Ford Mustang LX 1984-1986 Ford Mustang SVO 1993 Ford Mustang SVT Cobra 1993 Ford Mustang SVT Cobra R 1983 Ford Mustang Turbo GT

A-arms are one of the most important, yet overlooked suspension components. They are the direct link between the front wheels and the chassis. Any deflection causes a change in alignment, which results in poor performance and driving feel. Fabricated from heavy-duty 1.5-inch, 0.095-inch wall and 1.25-inch, 0.095-inch wall DOM tubing, deflection is eliminated with A-arms from BMR Suspension. BMR?s AA038 Lower A-arms are equipped with greasable, 95-durometer polyurethane bushings. Polyurethane bushings add a solid, more responsive feel over the stock rubber bushings. BMR?s bushings are internally fluted, which allows grease to evenly coat the inner sleeve. These flutes also direct grease to the outer edge of the bushing, keeping the thrust surface lubricated. This efficient lubrication ensures quiet, reliable operation over the life of the bushings.Application GuideThis Part Fits: Year Make Model Submodel 1979-1981 Ford Mustang Base 1981 Ford Mustang Cobra 1979-1981 Ford Mustang Ghia 1982-1983 Ford Mustang GL 1982-1983 Ford Mustang GLX 1982-1993 Ford Mustang GT 1984 Ford Mustang GT-350 20th Anniversary 1982-1984 Ford Mustang L 1984-1993 Ford Mustang LX 1984-1986 Ford Mustang SVO 1993 Ford Mustang SVT Cobra 1993 Ford Mustang SVT Cobra R 1983 Ford Mustang Turbo GT

A-arms are one of the most important, yet overlooked suspension components. They are the direct link between the front wheels and the chassis. Any deflection causes a change in alignment, which results in poor performance and driving feel. Fabricated from heavy-duty 1.5-inch, 0.095-inch wall and 1.25-inch, 0.095-inch wall DOM tubing, deflection is eliminated with A-arms from BMR Suspension. BMR?s AA034 Lower A-arms are equipped with greasable, 95-durometer polyurethane bushings. Polyurethane bushings add a solid, more responsive feel over the stock rubber bushings. BMR?s bushings are internally fluted, which allows grease to evenly coat the inner sleeve. These flutes also direct grease to the outer edge of the bushing, keeping the thrust surface lubricated. This efficient lubrication ensures quiet, reliable operation over the life of the bushings.Application GuideThis Part Fits: Year Make Model Submodel 1979-1981 Ford Mustang Base 1981 Ford Mustang Cobra 1979-1981 Ford Mustang Ghia 1982-1983 Ford Mustang GL 1982-1983 Ford Mustang GLX 1982-1993 Ford Mustang GT 1984 Ford Mustang GT-350 20th Anniversary 1982-1984 Ford Mustang L 1984-1993 Ford Mustang LX 1984-1986 Ford Mustang SVO 1993 Ford Mustang SVT Cobra 1993 Ford Mustang SVT Cobra R 1983 Ford Mustang Turbo GT

A-arms are one of the most important, yet overlooked suspension components. They are the direct link between the front wheels and the chassis. Any deflection causes a change in alignment, which results in poor performance and driving feel. Fabricated from heavy-duty 1.5-inch, 0.095-inch wall and 1.25-inch, 0.095-inch wall DOM tubing, deflection is eliminated with A-arms from BMR Suspension. BMR?s AA034 Lower A-arms are equipped with greasable, 95-durometer polyurethane bushings. Polyurethane bushings add a solid, more responsive feel over the stock rubber bushings. BMR?s bushings are internally fluted, which allows grease to evenly coat the inner sleeve. These flutes also direct grease to the outer edge of the bushing, keeping the thrust surface lubricated. This efficient lubrication ensures quiet, reliable operation over the life of the bushings.Application GuideThis Part Fits: Year Make Model Submodel 1979-1981 Ford Mustang Base 1981 Ford Mustang Cobra 1979-1981 Ford Mustang Ghia 1982-1983 Ford Mustang GL 1982-1983 Ford Mustang GLX 1982-1993 Ford Mustang GT 1984 Ford Mustang GT-350 20th Anniversary 1982-1984 Ford Mustang L 1984-1993 Ford Mustang LX 1984-1986 Ford Mustang SVO 1993 Ford Mustang SVT Cobra 1993 Ford Mustang SVT Cobra R 1983 Ford Mustang Turbo GT

BMR 79-93 Fox Mustang Weld-On Boxed Subframe Connectors (Outside Frame Exhaust) - Black Hammertone

A-arms are one of the most important, yet overlooked suspension components. They are the direct link between the front wheels and the chassis. Any deflection causes a change in alignment, which results in poor performance and driving feel. Fabricated from heavy-duty 1.5-inch, 0.095-inch wall and 1.25-inch, 0.095-inch wall DOM tubing, deflection is eliminated with A-arms from BMR Suspension. BMR?s AA036 Lower A-arms are equipped with heavy-duty, Teflon-lined rod ends. BMR?s heavy-duty rod ends are designed to solidly link the A-arms to the body, eliminating deflection. Our rod ends will stand up to high loads of any performance environment, offering all of the bind-free suspension articulation needed for great handling.Application GuideThis Part Fits: Year Make Model Submodel 1979-1981 Ford Mustang Base 1981 Ford Mustang Cobra 1979-1981 Ford Mustang Ghia 1982-1983 Ford Mustang GL 1982-1983 Ford Mustang GLX 1982-1993 Ford Mustang GT 1984 Ford Mustang GT-350 20th Anniversary 1982-1984 Ford Mustang L 1984-1993 Ford Mustang LX 1984-1986 Ford Mustang SVO 1993 Ford Mustang SVT Cobra 1993 Ford Mustang SVT Cobra R 1983 Ford Mustang Turbo GT

A-arms are one of the most important, yet overlooked suspension components. They are the direct link between the front wheels and the chassis. Any deflection causes a change in alignment, which results in poor performance and driving feel. Fabricated from heavy-duty 1.5-inch, 0.095-inch wall and 1.25-inch, 0.095-inch wall DOM tubing, deflection is eliminated with A-arms from BMR Suspension. BMR?s AA035 Lower A-arms are equipped with greasable, 95-durometer polyurethane bushings. Polyurethane bushings add a solid, more responsive feel over the stock rubber bushings. BMR?s bushings are internally fluted, which allows grease to evenly coat the inner sleeve. These flutes also direct grease to the outer edge of the bushing, keeping the thrust surface lubricated. This efficient lubrication ensures quiet, reliable operation over the life of the bushings.Application GuideThis Part Fits: Year Make Model Submodel 1979-1981 Ford Mustang Base 1981 Ford Mustang Cobra 1979-1981 Ford Mustang Ghia 1982-1983 Ford Mustang GL 1982-1983 Ford Mustang GLX 1982-1993 Ford Mustang GT 1984 Ford Mustang GT-350 20th Anniversary 1982-1984 Ford Mustang L 1984-1993 Ford Mustang LX 1984-1986 Ford Mustang SVO 1993 Ford Mustang SVT Cobra 1993 Ford Mustang SVT Cobra R 1983 Ford Mustang Turbo GT