The AEM 21-778C Performance Cold Air Intake System produces horsepower and torque gains by replacing your vehicle's restrictive factory air filter and air intake housing. Air enters the system through an oversized AEM Dryflow synthetic washable air filter for outstanding air flow, filtration and performance. The air filter is relocated to be in driver-side wheel well which is designed to reduce intake air temperature and increase horsepower. The lower air intake tube is a free-flowing, mandrel-bent aluminum tube with a durable gunmetal gray powder coat finish. The upper air intake tube is a roto-molded, aerodynamically engineered, HDPE tube that insulates the cooler intake air from heat as it passes through the engine bay and into the engine's throttle body. This air intake system was developed to accommodate the Lancer's factory emissions control devices including the mass airflow sensor and PCV hose. The tapered cylinder shaped AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the 21-778C vehicle applications to determine the legal status for each vehicle.Installation InstructionsUser 1This Part Fits: Year Make Model Submodel 2015-2017 Mitsubishi Lancer ES 2015 Mitsubishi Lancer Evolution GSR 2015-2016 Mitsubishi Lancer GT 2015-2017 Mitsubishi Lancer SE 2016-2017 Mitsubishi Lancer SEL

The AEM 21-732C Performance Cold Air Intake System produces horsepower and torque gains by replacing your vehicle's restrictive factory air filter and air intake housing. This air intake system was designed, tuned and dyno-tested to fit specific Subaru WRX models. Air enters the system through an oversized AEM Dryflow synthetic washable air filter for outstanding air flow, filtration and performance. The air filter is located in the original air box space and is protected by a heat shield which is designed to reduce intake air temperature and increase horsepower. The intake tubing is constructed from mandrel-bent aluminum featuring a durable gunmetal gray powder coated finish. This air intake system was developed to accommodate the engine's factory emissions control devices including the mass air flow sensor. The tapered cylinder shaped AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). The air intake system is easy to install with commonly available tools and it is backed by AEM's Lifetime Limited Warranty. Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the 21-732C vehicle applications to determine the legal status for each vehicle.Installation InstructionsUser 1This Part Fits: Year Make Model Submodel 2015-2020 Subaru WRX Base 2015-2020 Subaru WRX Limited 2015-2020 Subaru WRX Premium

The AEM-29-0011WR performance strut bar provides additional vehicle stability on various Subaru WRX and WRX STI models. AEM strut bars are constructed from 1-1/2 inch steel tubing, providing great strength and low weight which gives you a true racing option and a more professional alternative to many hinged or weaker strut bars on the market. The AEM-29-0011WR performance strut bar comes in a textured red powder coated finish featuring the AEM logo giving you a clean high-performance look under the hood. This strut bar is easy to install in minutes onto the existing strut tower bolts.Installation InstructionsThis Part Fits: Year Make Model Submodel 2015-2020 Subaru WRX Base 2015-2020 Subaru WRX Limited 2015-2020 Subaru WRX Premium 2015-2021 Subaru WRX STI Base 2015 Subaru WRX STI Launch Edition 2015-2021 Subaru WRX STI Limited 2019 Subaru WRX STI S209 2016 Subaru WRX STI Series.HyperBlue 2018 Subaru WRX STI Type RA

The AEM 21-808C Performance Cold Air Intake System produces horsepower and torque gains by improving air flow and drawing in cooler, denser air. It all begins with a cone shaped AEM Dryflow filter which uses a synthetic filter media for outstanding air flow, filtration and performance. By relocating the air filter lower and to the front of the car, cooler and denser air can be accessed. Oiling the filter is not necessary and can be used up to 100,000 miles before cleaning is needed (depending on driving conditions). A heat shield then prevents exposure to radiant engine heat. Running up to the throttle body is the intake tube which is mandrel-bent to reduce airflow restriction at the bends. It is made of aluminum and is powder coated gray for lasting performance. Replacing the restrictive factory pipe and air intake housing with this Cold Air Intake system is an easy installation process and instructions are provided. The factory mass air flow sensor and crank case breather hose mount directly to the intake tube. Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the 21-808C vehicle applications to determine the legal status for each vehicle.Installation InstructionsUser 1This Part Fits: Year Make Model Submodel 2015-2016 Subaru Legacy 2.5i 2015-2016 Subaru Legacy 2.5i Limited 2015-2016 Subaru Legacy 2.5i Premium 2015-2016 Subaru Outback 2.5i 2015-2016 Subaru Outback 2.5i Limited 2015-2016 Subaru Outback 2.5i Premium

The AEM-21-786C Performance Cold Air Intake System produces horsepower and torque gains by replacing your vehicle's restrictive factory air filter and air intake housing. This air intake system was designed, tuned and dyno-tested to fit select Mazda MX-5 Miata models. Air enters the system through an oversized AEM Dryflow synthetic washable air filter for outstanding air flow, filtration and performance. The air filter is located in the original air box space and is protected by a heat shield which is designed to reduce intake air temperature and increase horsepower. Attached to the heat shield is an aluminum coolant overflow reservoir that replaces the stock reservoir so that the air intake will fit properly. The air intake tubing is constructed from mandrel-bent aluminum featuring a durable gunmetal gray powder coated finish. This air intake system was developed to accommodate the engine's factory emissions control devices including the mass air flow sensor and PCV hose. The tapered cylinder shaped AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). The air intake system is easy to install with commonly available tools. Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the 21-786C vehicle applications to determine the legal status for each vehicle.Installation InstructionsUser 1This Part Fits: Year Make Model Submodel 2020 Mazda MX-5 Miata 100th Anniversary Special Edition 2016-2022 Mazda MX-5 Miata Club 2016-2022 Mazda MX-5 Miata Grand Touring 2020 Mazda MX-5 Miata RF 100th Anniversary Special Edition 2017-2022 Mazda MX-5 Miata RF Club 2017-2022 Mazda MX-5 Miata RF Grand Touring 2016-2022 Mazda MX-5 Miata Sport

The AEM-21-791C Performance Cold Air Intake System produces horsepower and torque gains by replacing your vehicle's restrictive factory air filter and air intake housing. This air intake system was designed, tuned and dyno-tested to fit specific Lexus IS200T L4 2.0L models. Air enters the system through an oversized AEM Dryflow synthetic washable air filter for outstanding air flow, filtration and performance. The air filter is located in the original air box space and is protected by a heat shield which is designed to reduce intake air temperature and increase horsepower. The intake tubing is constructed from mandrel-bent aluminum featuring a durable gunmetal gray powder coated finish. This air intake system was developed to accommodate the engine's factory emissions control devices including the valve cover breather hose. The tapered cylinder shaped AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). The air intake system is easy to install with commonly available tools. Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the AEM-21-791C vehicle applications to determine the legal status for each vehicle.Installation InstructionsUser 1This Part Fits: Year Make Model Submodel 2016-2017 Lexus IS200t Base 2016-2017 Lexus IS200t F Sport 2018-2024 Lexus IS300 Base 2018-2020,2024 Lexus IS300 F Sport 2024 Lexus IS300 F Sport Design

The AEM 22-692C Performance Air Intake System is a free-flowing, mandrel-bent aluminum tube air induction system designed to replace the restrictive factory air filter and air intake tubing while retaining the factory air box on select Lexus IS 200t models. The air intake system comes with a replacement AEM high-flow air filter and a free-flowing aluminum intake tube that easily connects to your vehicle's factory air box and engine throttle body to dramatically increase air flow into your engine. With more air flowing through the custom-tuned intake tube, you experience more horsepower and acceleration throughout the engine's RPM range. The air intake tube accodomates a breather hose and is finished with an attractive and durable gunmetal gray powder-coating that provides a clean, high-performance look under the hood. The AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before servicing is needed (depending on driving conditions). This air intake is designed for easy installation and requires commonly available tools to do the job. The air intake system comes with AEM's Lifetime Limited Warranty. Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards while others are 50 state legal. View the 22-692C vehicle applications to determine the legal status for each vehicle.Installation InstructionsUser 1This Part Fits: Year Make Model Submodel 2016-2017 Lexus IS200t Base 2016-2017 Lexus IS200t F Sport 2018-2021 Lexus IS300 Base 2018-2020 Lexus IS300 F Sport

The AEM 21-793C Performance Cold Air Intake System produces horsepower and torque gains by replacing your vehicle's restrictive factory air filter and air intake housing. This air intake system was designed, tuned and dyno-tested to fit specific Nissan Maxima models. Air enters the system through an oversized AEM Dryflow synthetic washable air filter for outstanding air flow, filtration and performance. The air filter is placed into the original air box space and is protected by a heat shield which is designed to reduce intake air temperature and increase horsepower. The air intake tube is constructed from mandrel-bent aluminum featuring a durable gunmetal gray powder coated finish. This air intake system was developed to accommodate the engine's factory emissions control devices including the mass air flow sensor and engine vent hose. The tapered cylinder shaped AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). The air intake system is easy to install with commonly available tools and it is backed by AEM's Lifetime Limited Warranty. Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the 21-793C vehicle applications to determine the legal status for each vehicle.Installation InstructionsUser 1This Part Fits: Year Make Model Submodel 2021 Nissan Maxima 40th Anniversary Edition 2016-2023 Nissan Maxima Platinum 2020 Nissan Maxima Platinum Reserve 2016-2020 Nissan Maxima S 2016-2020 Nissan Maxima SL 2016-2023 Nissan Maxima SR 2016-2023 Nissan Maxima SV

The AEM 21-817C Performance Cold Air Intake System produces horsepower and torque gains by replacing your vehicle's restrictive factory air filter and air intake housing. This air intake system was designed, tuned and dyno-tested to fit specific Hyundai Elantra Sport models. The oversized cone-shaped AEM Dry Flow filter is made from an oil-free, synthetic filter media and can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). This system puts the air filter low and towards the front of the car where cooler air can be found. The cooler and denser air is then channeled through the mandrel-bent aluminum intake tube into the throttle body. The factory PCV and vent hoses mount directly on the intake tube using the existing spring clamps. The air intake system is backed by AEM's Lifetime Limited Warranty. Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the 21-817C vehicle applications to determine the legal status for each vehicle.Installation InstructionsUser 1This Part Fits: Year Make Model Submodel 2017-2018 Hyundai Elantra Sport

This Performance Air Intake System allows your engine to breath more air compared to the restrictive factory air intake housing. It is designed, tuned, and dyno-tested to produce more horsepower and torque. The cone-shaped AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). A custom shaped heat shield with edge trim lining is included to keep engine bay heat from the air intake. The air intake tube is constructed from mandrel-bent aluminum featuring a durable gunmetal gray powder coated finish. This air intake system is backed by AEM's Lifetime Limited Warranty. Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the vehicle applications to determine the legal status for each vehicle.Installation InstructionsTechnical DrawingInstallation InstructionsThis Part Fits: Year Make Model Submodel 2017-2020 Honda Civic Type R

This Performance Air Intake System allows your engine to breathe more air compared to the restrictive factory air intake housing. It is designed, tuned and dyno-tested to produce more horsepower and torque. This system replaces both the left and right side intakes. The cone shaped AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). The durable powder coated heatshields utilize the factory air ducting and the intake tubes are made from roto-molded plastic. This Air Intake System is backed by AEM's Lifetime Limited Warranty. Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the vehicle applications to determine the legal status for each vehicle.Installation InstructionsUser 1Installation InstructionsThis Part Fits: Year Make Model Submodel 2024 Genesis G70 Base 2024 Genesis G70 Sport Advanced 2024 Genesis G70 Sport Prestige 2018-2021 Kia Stinger GT 2018-2022 Kia Stinger GT1 2018-2023 Kia Stinger GT2 2019 Kia Stinger GTS 2023 Kia Stinger Tribute Edition

AEM cold air intake systems are designed to increase horsepower and torque. The system includes an oversized AEM DRYFLOW synthetic washable air filter, engineered to provide outstanding airflow, filtration, and performance, and also features a mandrel-bent aluminum intake tube and high quality hardware. The oversized, conical filter design allows you to go up to 100,000 miles between filter services under normal highway driving conditions. A custom heat shield helps protect intake air from the high temperature of your engine bay, and the factory fresh air duct attaches to the heat shield. The entire system can typically be installed in less than 90 minutes. Some intakes are not legal for sale or use on any pollution controlled motor vehicle in California. See the product specifications for CARB status on each part for a specific vehicle.Installation InstructionsUser 1This Part Fits: Year Make Model Submodel 2018 Subaru WRX STI Base 2018 Subaru WRX STI Limited 2018 Subaru WRX STI Type RA

This Performance Air Intake System allows your engine to breath more air compared to the restrictive factory air intake housing. It is designed, tuned, and dyno-tested to produce more horsepower and torque. The cone-shaped AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). A custom shaped heat shield with edge trim lining is included to keep engine bay heat from the air intake. The air intake tube is constructed from mandrel-bent aluminum featuring a durable gunmetal gray powder coated finish. This air intake system is backed by AEM's Lifetime Limited Warranty. Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the vehicle applications to determine the legal status for each vehicle.Installation InstructionsUser 1Installation InstructionsThis Part Fits: Year Make Model Submodel 2018-2019 Toyota Camry Hybrid LE 2018-2019 Toyota Camry Hybrid SE 2018-2019 Toyota Camry Hybrid XLE 2018-2020 Toyota Camry L 2018-2024 Toyota Camry LE 2018-2024 Toyota Camry SE 2020-2024 Toyota Camry SE Nightshade 2018-2024 Toyota Camry XLE 2018-2024 Toyota Camry XSE

The AEM 21-836WR Performance Cold Air Intake System produces horsepower and torque gains by replacing your vehicle's restrictive factory air filter and air intake housing. This air intake system was designed, tuned and dyno-tested to fit specific Subaru WRX STI models. Air enters the system through an oversized AEM Dryflow synthetic washable air filter for outstanding air flow, filtration and performance. The air filter is located in the original air box space and is protected by a heat shield which is designed to reduce intake air temperature and increase horsepower. The intake tubing is constructed from mandrel-bent aluminum featuring a durable textured red powder coated finish. This air intake system was developed to accommodate the engine's factory emissions control devices including the mass air flow sensor. The tapered cylinder shaped AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). The air intake system is easy to install with commonly available tools and it is backed by AEM's Lifetime Limited Warranty. Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards while others are 50 state legal. View the 21-836WR vehicle applications to determine the legal status for each vehicle.Technical DrawingInstallation InstructionsInstallation InstructionsThis Part Fits: Year Make Model Submodel 2018 Subaru WRX STI Base 2018 Subaru WRX STI Limited 2018 Subaru WRX STI Type RA

This Performance Air Intake System allows your engine to breath more air compared to the restrictive factory air intake housing. It is designed, tuned, and dyno-tested to produce more horsepower and torque. The cone-shaped AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). A custom shaped heat shield with edge trim lining is included to keep engine bay heat from the air intake. The air intake tube is constructed from mandrel-bent aluminum featuring a durable gunmetal gray powder coated finish. This air intake system is backed by AEM's Lifetime Limited Warranty. Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the vehicle applications to determine the legal status for each vehicle.Installation InstructionsTechnical DrawingThis Part Fits: Year Make Model Submodel 2019-2024 Lexus ES350 Base 2019-2022 Lexus ES350 F Sport 2023-2024 Lexus ES350 F Sport Design 2023-2024 Lexus ES350 F Sport Handling 2019-2024 Lexus ES350 Luxury 2019-2024 Lexus ES350 Ultra Luxury 2019-2022 Toyota Avalon Limited 2019-2022 Toyota Avalon Touring 2020-2021 Toyota Avalon TRD 2019-2022 Toyota Avalon XLE 2019-2020 Toyota Avalon XSE 2021 Toyota Avalon XSE Nightshade 2020-2024 Toyota Camry TRD 2018-2024 Toyota Camry XLE 2018-2024 Toyota Camry XSE

This Performance Air Intake System allows your engine to breathe more air compared to the restrictive factory air intake housing. It is designed, tuned and dyno-tested to produce more horsepower and torque. Air enters the system through an oversized AEM Dryflow synthetic washable air filter for outstanding air flow, filtration and performance. The air intake tube is constructed from mandrel-bent aluminum featuring a durable gunmetal gray powder coated finish. A custom shaped heat shield with lid is included. The tapered cylinder shaped AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). This Air Intake System is backed by AEM's Lifetime Limited Warranty. Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the vehicle applications to determine the legal status for each vehicle.Installation InstructionsUser 1This Part Fits: Year Make Model Submodel 2022-2025 Hyundai Santa Cruz Limited 2023-2025 Hyundai Santa Cruz Night 2022-2024 Hyundai Santa Cruz SE 2022-2024 Hyundai Santa Cruz SEL 2022-2023 Hyundai Santa Cruz SEL Premium 2024-2025 Hyundai Santa Cruz XRT 2021-2025 Hyundai Santa Fe Calligraphy 2021-2025 Hyundai Santa Fe Limited 2024-2025 Hyundai Santa Fe SE 2024-2025 Hyundai Santa Fe SEL 2024 Hyundai Santa Fe XRT 2021-2025 Kia Sorento EX 2021-2025 Kia Sorento SX 2021-2024 Kia Sorento SX Prestige 2022-2025 Kia Sorento X-Line EX 2025 Kia Sorento X-Line SX 2022-2025 Kia Sorento X-Line SX Prestige 2024 Kia Sorento X-Pro 2025 Kia Sorento X-Pro SX Prestige

This Performance Air Intake System allows your engine to breathe more air compared to the restrictive factory air intake housing. It is designed, tuned and dyno-tested to produce more horsepower and torque. Air enters the system from the factory fresh air inlets. through replacement air duct and into a roto-molded, aerodynamic AEM air box containing an oversized AEM Dryflow synthetic washable air filter for outstanding air flow, filtration and performance.The cone shaped AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). This Air Intake System is backed by AEM's Lifetime Limited Warranty. Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the vehicle applications to determine the legal status for each vehicle.Installation InstructionsUser 1This Part Fits: Year Make Model Submodel 2020-2024 BMW Z4 sDrive30i 2021-2024 Toyota GR Supra Base

AEM's 22 Channel CAN Sensor Module (PN 30-2212) converts analog, digital and frequency inputs into an AEMnet CAN bus signal that can be transmitted to the CD-5 Carbon and CD-7 Digital Dashes. This expansion module provides a way for users with carbureted vehicles to add a CD Dash, and lets users with existing CAN-based devices add more channels to the display for viewing and/or data logging (data logging requires CD-5L Carbon or CD-7L logging Dashes). The 22-Channel CAN Sensor Module is compatible with the CD Dashes only; it will run in parallel with 3rd party CAN devices on the CD dashes but it is currently not compatible with AEM's AQ-1 Data Logger, Series 2 or Infinity ECUs, or 3rd party ECUs or loggers.WarrantyInstallation Instructions

The AEM 21-547C Performance Cold Air Intake System produces horsepower and torque gains by replacing your vehicle's restrictive factory air filter and air intake housing. This air intake system was designed, tuned and dyno-tested to fit specific Nissan 350Z models. Air enters the system through an oversized AEM Dryflow synthetic washable air filter for outstanding air flow, filtration and performance. The air filter is relocated to the driver-side wheel well behind the front bumper which is designed to reduce intake air temperature and increase horsepower. The intake tubing is constructed from mandrel-bent aluminum featuring a durable gunmetal gray powder coated finish. This air intake system was developed to accommodate the engine's factory emissions control devices including the mass air flow sensor and engine breather hose. The tapered cylinder shaped AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). The air intake system is backed by AEM's Lifetime Limited Warranty. Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the 21-547C vehicle applications to determine the legal status for each vehicle.Installation InstructionsThis Part Fits: Year Make Model Submodel 2005 Nissan 350Z 35th Anniversary Edition 2003-2006 Nissan 350Z Base 2003-2006 Nissan 350Z Enthusiast 2005-2006 Nissan 350Z Grand Touring 2003-2005 Nissan 350Z Performance 2003-2006 Nissan 350Z Touring 2003-2006 Nissan 350Z Track

AEM's 21-5011 is ideal for engine swaps when a custom intake is required. It comes with an AEM Dryflow Air Filter, three 4 inch diameter aluminum tube bends, one straight 36 inch long, 4 inch diameter tube, seven couplers, a weld-on mass air flow sensor pad, two brackets and hardware needed to custom build an air intake.Installation Instructions

Digital Boost Gauge, -30 - 50psi, incl blk and wht faces, blk and silvr bezelsWarrantyInstallation Instructions

8-Channel K-Type Thermocouple EGT/Temperature Sensor Module with CANbusconnectivity, includes CAN Module, DTM connector plug, Velcro tab for mounting and instructions.WarrantyInstallation Instructions

The AEM 22-402B Performance Short Ram Air Intake System has been engineered to be an affordable and easy way to boost the horsepower and torque of your engine. The restrictive factory air filter and air intake housing are replaced with this AEM air intake system which was designed, tuned and dyno-tested to fit specific Acura Integra and Integra GS-R models. Air enters the system through an oversized AEM Dryflow synthetic washable air filter for outstanding air flow, filtration and performance. The sound your engine makes when accelerating is also modified to a fuller, more aggressive resonance allowing you to hear and feel the horsepower upgrade. The intake tubing is constructed from mandrel-bent aluminum featuring a durable blue powder coated finish. This air intake system was developed to accommodate the engine's factory emissions control devices including the engine breather hose and any vacuum lines. The tapered cylinder shaped AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). The air intake system is easy to install with commonly available tools and it is backed by AEM's Lifetime Limited Warranty. Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the 22-402B vehicle applications to determine the legal status for each vehicle.Installation InstructionsThis Part Fits: Year Make Model Submodel 1990-1993 Acura Integra GS 1992-1993 Acura Integra GS-R 1990-1993 Acura Integra LS 1990-1993 Acura Integra RS

The AEM 24-6005C Dual Chamber Air Intake System is engineered to maximize horsepower and torque gains for specific Honda Prelude models by utilizing a patented dual chamber design. The restrictive factory air filter and air intake housing are replaced with this AEM dual chamber air intake system. Air enters the system through an oversized AEM Dryflow synthetic washable air filter for outstanding air flow, filtration and performance. The sound your engine makes when accelerating is also modified to a fuller, more aggressive resonance allowing you to hear and feel the horsepower upgrade. The intake tubing is constructed from mandrel-bent aluminum featuring a durable gunmetal gray powder coated finish. This air intake system was developed to accommodate the engine's factory emissions control devices including the engine breather hoses and water bypass hose. The tapered cylinder shaped AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). The air intake system is backed by AEM's Lifetime Limited Warranty. Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the 24-6005C vehicle applications to determine the legal status for each vehicle.Installation InstructionsThis Part Fits: Year Make Model Submodel 1997-2001 Honda Prelude Base 1992-1996 Honda Prelude S 1995 Honda Prelude SE 1992-1996 Honda Prelude Si 1992-1994 Honda Prelude Si 4WS 1997-2001 Honda Prelude Type SH 1993-1996 Honda Prelude VTEC

The AEM 21-8315DC Brute Force Air Intake System produces horsepower and torque gains by replacing the vehicle's restrictive factory air filter and air intake housing. This air intake system was designed, tuned and dyno-tested to fit specific Jeep Cherokee models. Air enters the system through an extra-large AEM Dryflow synthetic washable air filter for outstanding air flow, filtration and performance. The air filter is located in the original air box space and is protected by a heat shield which is designed to reduce intake air temperature and increase horsepower. The intake tubing is constructed from mandrel-bent aluminum featuring a durable gunmetal gray powder coated finish. This air intake system was developed to accommodate the engine's factory emissions control devices including the crankcase breather hose. The tapered cylinder shaped AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). The air intake system is easy to install with commonly available tools and it is backed by AEM's Lifetime Limited Warranty. Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards while others are 50 state legal. View the 21-8315DC vehicle applications to determine the legal status for each vehicle.Installation InstructionsThis Part Fits: Year Make Model Submodel 1991-1993 Jeep Cherokee Base 1991-1992 Jeep Cherokee Briarwood 1996,1998-2001 Jeep Cherokee Classic 1993-1997 Jeep Cherokee Country 1991-1992 Jeep Cherokee Laredo 1991-1992,1998-2001 Jeep Cherokee Limited 1994-2001 Jeep Cherokee SE 1991-2001 Jeep Cherokee Sport

The AEM 22-440R Performance Short Ram Air Intake System has been engineered to be an affordable and easy way to boost the horsepower and torque of your engine. The restrictive factory air filter and air intake housing are replaced with this AEM air intake system which was designed, tuned and dyno-tested to fit specific Nissan 240SX models. Air enters the system through an oversized AEM Dryflow synthetic washable air filter for outstanding air flow, filtration and performance. The sound your engine makes when accelerating is also modified to a fuller, more aggressive resonance allowing you to hear and feel the horsepower upgrade. The intake tubing is constructed from mandrel-bent aluminum featuring a durable red powder coated finish. This air intake system was developed to accommodate the engine's factory emissions control devices including the engine breather hoses and mass air flow sensor. The tapered cylinder shaped AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). The air intake system is easy to install with commonly available tools and it is backed by AEM's Lifetime Limited Warranty. Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the 22-440R vehicle applications to determine the legal status for each vehicle.Installation InstructionsThis Part Fits: Year Make Model Submodel 1991-1993 Nissan 240SX Base 1991-1992 Nissan 240SX LE 1991-1994 Nissan 240SX SE

The AEM 22-401B Performance Short Ram Air Intake System has been engineered to be an affordable and easy way to boost the horsepower and torque of your engine. The restrictive factory air filter and air intake housing are replaced with this AEM air intake system. Air enters the system through an oversized AEM Dryflow synthetic washable air filter for outstanding air flow, filtration and performance. The sound your engine makes when accelerating is also modified to a fuller, more aggressive resonance allowing you to hear and feel the horsepower upgrade. The intake tubing is constructed from mandrel-bent aluminum featuring a durable blue powder coated finish. This air intake system was developed to accommodate the engine's factory emissions control devices including the engine breather hose, vacuum lines and inlet air temperature sensor (where equipped). The tapered cylinder shaped AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). The air intake system is easy to install with commonly available tools. Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the 22-401B vehicle applications to determine the legal status for each vehicle.Installation InstructionsThis Part Fits: Year Make Model Submodel 1992-1995 Honda Civic DX 1992-2000 Honda Civic EX 1992-1995 Honda Civic LX 1992-1995 Honda Civic Si 1993-1997 Honda Civic del Sol S 1993-1997 Honda Civic del Sol Si 1994-1997 Honda Civic del Sol VTEC

The AEM 22-401R Performance Short Ram Air Intake System has been engineered to be an affordable and easy way to boost the horsepower and torque of your engine. The restrictive factory air filter and air intake housing are replaced with this AEM air intake system. Air enters the system through an oversized AEM Dryflow synthetic washable air filter for outstanding air flow, filtration and performance. The sound your engine makes when accelerating is also modified to a fuller, more aggressive resonance allowing you to hear and feel the horsepower upgrade. The intake tubing is constructed from mandrel-bent aluminum featuring a durable red powder coated finish. This air intake system was developed to accommodate the engine's factory emissions control devices including the engine breather hose, vacuum lines and inlet air temperature sensor (where equipped). The tapered cylinder shaped AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). The air intake system is easy to install with commonly available tools. Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the 22-401R vehicle applications to determine the legal status for each vehicle.Installation InstructionsThis Part Fits: Year Make Model Submodel 1992-1995 Honda Civic DX 1992-2000 Honda Civic EX 1992-1995 Honda Civic LX 1992-1995 Honda Civic Si 1993-1997 Honda Civic del Sol S 1993-1997 Honda Civic del Sol Si 1994-1997 Honda Civic del Sol VTEC

The AEM 22-405B Performance Short Ram Air Intake System has been engineered to be an affordable and easy way to boost the horsepower and torque of your engine. The restrictive factory air filter and air intake housing are replaced with this AEM air intake system which was designed, tuned and dyno-tested to fit specific Honda Prelude models. Air enters the system through an oversized AEM Dryflow synthetic washable air filter for outstanding air flow, filtration and performance. The sound your engine makes when accelerating is also modified to a fuller, more aggressive resonance allowing you to hear and feel the horsepower upgrade. The intake tubing is constructed from mandrel-bent aluminum featuring a durable blue powder coated finish. This air intake system was developed to accommodate the engine's factory emissions control devices including the engine breather hose and any vacuum lines. The tapered cylinder shaped AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). The air intake system is easy to install with commonly available tools and it is backed by AEM's Lifetime Limited Warranty. Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the 22-405B vehicle applications to determine the legal status for each vehicle.Installation InstructionsThis Part Fits: Year Make Model Submodel 1992-1996 Honda Prelude S 1995 Honda Prelude SE 1992-1996 Honda Prelude Si 1992-1994 Honda Prelude Si 4WS 1993-1996 Honda Prelude VTEC

The AEM 22-405P Performance Short Ram Air Intake System has been engineered to be an affordable and easy way to boost the horsepower and torque of your engine. The restrictive factory air filter and air intake housing are replaced with this AEM air intake system which was designed, tuned and dyno-tested to fit specific Honda Prelude models. Air enters the system through an oversized AEM Dryflow synthetic washable air filter for outstanding air flow, filtration and performance. The sound your engine makes when accelerating is also modified to a fuller, more aggressive resonance allowing you to hear and feel the horsepower upgrade. The intake tubing is constructed from mandrel-bent aluminum featuring a durable chrome-like finish. This air intake system was developed to accommodate the engine's factory emissions control devices including the engine breather hose and any vacuum lines. The tapered cylinder shaped AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). The air intake system is easy to install with commonly available tools and it is backed by AEM's Lifetime Limited Warranty. Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the 22-405P vehicle applications to determine the legal status for each vehicle.Installation InstructionsThis Part Fits: Year Make Model Submodel 1992-1996 Honda Prelude S 1995 Honda Prelude SE 1992-1996 Honda Prelude Si 1992-1994 Honda Prelude Si 4WS 1993-1996 Honda Prelude VTEC

The AEM 22-405R Performance Short Ram Air Intake System has been engineered to be an affordable and easy way to boost the horsepower and torque of your engine. The restrictive factory air filter and air intake housing are replaced with this AEM air intake system which was designed, tuned and dyno-tested to fit specific Honda Prelude models. Air enters the system through an oversized AEM Dryflow synthetic washable air filter for outstanding air flow, filtration and performance. The sound your engine makes when accelerating is also modified to a fuller, more aggressive resonance allowing you to hear and feel the horsepower upgrade. The intake tubing is constructed from mandrel-bent aluminum featuring a durable red powder coated finish. This air intake system was developed to accommodate the engine's factory emissions control devices including the engine breather hose and any vacuum lines. The tapered cylinder shaped AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). The air intake system is easy to install with commonly available tools and it is backed by AEM's Lifetime Limited Warranty. Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the 22-405R vehicle applications to determine the legal status for each vehicle.Installation InstructionsThis Part Fits: Year Make Model Submodel 1992-1996 Honda Prelude S 1995 Honda Prelude SE 1992-1996 Honda Prelude Si 1992-1994 Honda Prelude Si 4WS 1993-1996 Honda Prelude VTEC

The AEM 22-403P Performance Short Ram Air Intake System has been engineered to be an affordable and easy way to boost the horsepower and torque of your engine. The restrictive factory air filter and air intake housing are replaced with this AEM air intake system which was designed, tuned and dyno-tested to fit specific Acura Integra models. Air enters the system through an oversized AEM Dryflow synthetic washable air filter for outstanding air flow, filtration and performance. The sound your engine makes when accelerating is also modified to a fuller, more aggressive resonance allowing you to hear and feel the horsepower upgrade. The intake tubing is constructed from mandrel-bent aluminum featuring a durable chrome-like finish. This air intake system was developed to accommodate the engine's factory emissions control devices including the engine breather hose and any vacuum lines. The tapered cylinder shaped AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). The air intake system is easy to install with commonly available tools and it is backed by AEM's Lifetime Limited Warranty. Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the 22-403P vehicle applications to determine the legal status for each vehicle.Installation InstructionsThis Part Fits: Year Make Model Submodel 1997-2001 Acura Integra GS 1994-2001 Acura Integra GS-R 1994-2001 Acura Integra LS 1994-1998 Acura Integra RS 1995-1996 Acura Integra Special Edition 1997-1998,2000-2001 Acura Integra Type R

The AEM 22-403R Performance Short Ram Air Intake System has been engineered to be an affordable and easy way to boost the horsepower and torque of your engine. The restrictive factory air filter and air intake housing are replaced with this AEM air intake system which was designed, tuned and dyno-tested to fit specific Acura Integra models. Air enters the system through an oversized AEM Dryflow synthetic washable air filter for outstanding air flow, filtration and performance. The sound your engine makes when accelerating is also modified to a fuller, more aggressive resonance allowing you to hear and feel the horsepower upgrade. The intake tubing is constructed from mandrel-bent aluminum featuring a durable red powder coated finish. This air intake system was developed to accommodate the engine's factory emissions control devices including the engine breather hose and any vacuum lines. The tapered cylinder shaped AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). The air intake system is easy to install with commonly available tools and it is backed by AEM's Lifetime Limited Warranty. Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the 22-403R vehicle applications to determine the legal status for each vehicle.Installation InstructionsThis Part Fits: Year Make Model Submodel 1997-2001 Acura Integra GS 1994-2001 Acura Integra GS-R 1994-2001 Acura Integra LS 1994-1998 Acura Integra RS 1995-1996 Acura Integra Special Edition 1997-1998,2000-2001 Acura Integra Type R

The AEM 22-413R Performance Short Ram Air Intake System has been engineered to be an affordable and easy way to boost the horsepower and torque of your engine. The restrictive factory air filter and air intake housing are replaced with this AEM air intake system which was designed, tuned and dyno-tested to fit specific Honda Civic CX, DX and LX models. Air enters the system through an oversized AEM Dryflow synthetic washable air filter for outstanding air flow, filtration and performance. The sound your engine makes when accelerating is also modified to a fuller, more aggressive resonance allowing you to hear and feel the horsepower upgrade. The intake tubing is constructed from mandrel-bent aluminum featuring a durable red powder coated finish. This air intake system was developed to accommodate the engine's factory emissions control devices including the engine breather hose and any vacuum lines. The tapered cylinder shaped AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). The air intake system is easy to install with commonly available tools and it is backed by AEM's Lifetime Limited Warranty. Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the 22-413R vehicle applications to determine the legal status for each vehicle.Installation InstructionsThis Part Fits: Year Make Model Submodel 1996-2000 Honda Civic CX 1996-2000 Honda Civic DX 1996-2000 Honda Civic LX

The AEM 21-8103DC Brute Force Air Intake System produces horsepower and torque gains by replacing the vehicle's restrictive factory air filter and air intake housing. This air intake system was designed, tuned and dyno-tested to fit specific Ford Mustang GT models. Air enters the system through an extra-large AEM Dryflow synthetic washable air filter for outstanding air flow, filtration and performance. The air filter is located in the air filter assembly's original spot. The intake tubing is constructed from mandrel-bent aluminum featuring a durable gunmetal gray powder coated finish. This air intake system was developed to accommodate the engine's factory emissions control devices including the MAF sensor, IAT sensor, IAC line and PCV line. The tapered cylinder shaped AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). The air intake system is backed by AEM's Lifetime Limited Warranty. Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the 21-8103DC vehicle applications to determine the legal status for each vehicle.Installation InstructionsThis Part Fits: Year Make Model Submodel 1996-2004 Ford Mustang GT

The AEM 22-406B Performance Short Ram Air Intake System has been engineered to be an affordable and easy way to boost the horsepower and torque of your engine. The restrictive factory air filter and air intake housing are replaced with this AEM air intake system which was designed, tuned and dyno-tested to fit specific Honda Prelude models. Air enters the system through an oversized AEM Dryflow synthetic washable air filter for outstanding air flow, filtration and performance. The sound your engine makes when accelerating is also modified to a fuller, more aggressive resonance allowing you to hear and feel the horsepower upgrade. The intake tubing is constructed from mandrel-bent aluminum featuring a durable blue powder coated finish. This air intake system was developed to accommodate the engine's factory emissions control devices including the engine breather hose and any vacuum lines. The tapered cylinder shaped AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). The air intake system is easy to install with commonly available tools and it is backed by AEM's Lifetime Limited Warranty. Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the 22-406B vehicle applications to determine the legal status for each vehicle.Installation InstructionsThis Part Fits: Year Make Model Submodel 1997-2001 Honda Prelude Base 1997-2001 Honda Prelude Type SH