The AEM 21-462B Performance Cold Air Intake System produces horsepower and torque gains by replacing your vehicle's restrictive factory air filter and air intake housing. This air intake system was designed, tuned and dyno-tested to fit specific Toyota MR2 Spyder models. Air enters the system through an oversized AEM Dryflow synthetic washable air filter for outstanding air flow, filtration and performance. The air filter is relocated to the driver-side wheel well which is designed to reduce intake air temperature and increase horsepower. The intake tubing is constructed from mandrel-bent aluminum featuring a durable blue powder coated finish. This air intake system was developed to accommodate the engine's factory emissions control devices including the mass air flow sensor and vacuum switching valves. The tapered cylinder shaped AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). The air intake system is backed by AEM's Lifetime Limited Warranty. Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the 21-462B vehicle applications to determine the legal status for each vehicle.Installation InstructionsThis Part Fits: Year Make Model Submodel 2000-2005 Toyota MR2 Spyder Base

The AEM 22-508P Performance Short Ram Air Intake System has been engineered to be an affordable and easy way to boost the horsepower and torque of your engine. The restrictive factory air filter and air intake housing are replaced with this AEM air intake system which was designed, tuned and dyno-tested to fit specific Honda Civic Si models. Air enters the system through an oversized AEM Dryflow synthetic washable air filter for outstanding air flow, filtration and performance. The sound your engine makes when accelerating is also modified to a fuller, more aggressive resonance allowing you to hear and feel the horsepower upgrade. The intake tubing is constructed from mandrel-bent aluminum featuring a durable chrome-like finish. This air intake system was developed to accommodate the engine's factory emissions control devices including the intake air temperature sensor and breather hoses. The tapered cylinder shaped AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). The air intake system is easy to install with commonly available tools and it is backed by AEM's Lifetime Limited Warranty. Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the 22-508P vehicle applications to determine the legal status for each vehicle.Installation InstructionsThis Part Fits: Year Make Model Submodel 2002-2005 Honda Civic Si

The AEM 22-506B Performance Short Ram Air Intake System has been engineered to be an affordable and easy way to boost the horsepower and torque of your engine. The restrictive factory air filter and air intake housing are replaced with this AEM air intake system which was designed, tuned and dyno-tested to fit specific Acura RSX Type-S models. Air enters the system through an oversized AEM Dryflow synthetic washable air filter for outstanding air flow, filtration and performance. The sound your engine makes when accelerating is also modified to a fuller, more aggressive resonance allowing you to hear and feel the horsepower upgrade. The intake tubing is constructed from mandrel-bent aluminum featuring a durable blue powder coated finish. This air intake system was developed to accommodate the engine's factory emissions control devices including the intake air temperature sensor, intake air bypass thermal valve vacuum hose and crankcase breather tube. The tapered cylinder shaped AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). The air intake system is easy to install with commonly available tools. Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the 22-506B vehicle applications to determine the legal status for each vehicle.Installation InstructionsThis Part Fits: Year Make Model Submodel 2002-2006 Acura RSX Type-S

The AEM 22-506R Performance Short Ram Air Intake System has been engineered to be an affordable and easy way to boost the horsepower and torque of your engine. The restrictive factory air filter and air intake housing are replaced with this AEM air intake system which was designed, tuned and dyno-tested to fit specific Acura RSX Type-S models. Air enters the system through an oversized AEM Dryflow synthetic washable air filter for outstanding air flow, filtration and performance. The sound your engine makes when accelerating is also modified to a fuller, more aggressive resonance allowing you to hear and feel the horsepower upgrade. The intake tubing is constructed from mandrel-bent aluminum featuring a durable red powder coated finish. This air intake system was developed to accommodate the engine's factory emissions control devices including the intake air temperature sensor, intake air bypass thermal valve vacuum hose and crankcase breather tube. The tapered cylinder shaped AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). The air intake system is easy to install with commonly available tools. Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the 22-506R vehicle applications to determine the legal status for each vehicle.Installation InstructionsThis Part Fits: Year Make Model Submodel 2002-2006 Acura RSX Type-S

The AEM 22-469B Performance Short Ram Air Intake System has been engineered to be an affordable and easy way to boost the horsepower and torque of your engine. The restrictive factory air filter and air intake housing are replaced with this AEM air intake system which was designed, tuned and dyno-tested to fit specific Toyota Matrix and Corolla models. Air enters the system through an oversized AEM Dryflow synthetic washable air filter for outstanding air flow, filtration and performance. The sound your engine makes when accelerating is also modified to a fuller, more aggressive resonance allowing you to hear and feel the horsepower upgrade. The intake tubing is constructed from mandrel-bent aluminum featuring a durable blue powder coated finish. This air intake system was developed to accommodate the engine's factory emissions control devices including the mass airflow sensor and vacuum lines. The tapered cylinder shaped AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). The air intake system is easy to install with commonly available tools and it is backed by AEM's Lifetime Limited Warranty. Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the 22-469B vehicle applications to determine the legal status for each vehicle.Installation InstructionsThis Part Fits: Year Make Model Submodel 2003-2004 Toyota Corolla CE 2003-2004 Toyota Corolla LE 2003-2004 Toyota Corolla S 2003-2004 Toyota Matrix XR

The AEM 22-435B Performance Short Ram Air Intake System has been engineered to be an affordable and easy way to boost the horsepower and torque of your engine. The restrictive factory air filter and air intake housing are replaced with this AEM air intake system which was designed, tuned and dyno-tested to fit specific Mitsubishi Lancer Evolution models. Air enters the system through an oversized AEM Dryflow synthetic washable air filter for outstanding air flow, filtration and performance. The sound your engine makes when accelerating is also modified to a fuller, more aggressive resonance allowing you to hear and feel the horsepower upgrade. The intake tubing is constructed from mandrel-bent aluminum featuring a durable blue powder coated finish. This air intake system was developed to accommodate the engine's factory emissions control devices including the engine breather hose, mass air flow sensor and vacuum line as well as the turbo blow off valve. The tapered cylinder shaped AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). The air intake system is easy to install with commonly available tools. Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the 22-435B vehicle applications to determine the legal status for each vehicle.Installation InstructionsThis Part Fits: Year Make Model Submodel 2003-2006 Mitsubishi Lancer ES 2003-2006 Mitsubishi Lancer Evolution 2005-2006 Mitsubishi Lancer Evolution MR 2005-2006 Mitsubishi Lancer Evolution RS 2006 Mitsubishi Lancer Evolution SE 2003-2004 Mitsubishi Lancer LS 2003-2006 Mitsubishi Lancer OZ Rally 2006 Mitsubishi Lancer SE

The AEM 22-435P Performance Short Ram Air Intake System has been engineered to be an affordable and easy way to boost the horsepower and torque of your engine. The restrictive factory air filter and air intake housing are replaced with this AEM air intake system which was designed, tuned and dyno-tested to fit specific Mitsubishi Lancer Evolution models. Air enters the system through an oversized AEM Dryflow synthetic washable air filter for outstanding air flow, filtration and performance. The sound your engine makes when accelerating is also modified to a fuller, more aggressive resonance allowing you to hear and feel the horsepower upgrade. The intake tubing is constructed from mandrel-bent aluminum featuring a durable chrome-like finish. This air intake system was developed to accommodate the engine's factory emissions control devices including the engine breather hose, mass air flow sensor and vacuum line as well as the turbo blow off valve. The tapered cylinder shaped AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). The air intake system is easy to install with commonly available tools. Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the 22-435P vehicle applications to determine the legal status for each vehicle.Installation InstructionsThis Part Fits: Year Make Model Submodel 2003-2006 Mitsubishi Lancer Evolution 2005-2006 Mitsubishi Lancer Evolution MR 2005-2006 Mitsubishi Lancer Evolution RS 2006 Mitsubishi Lancer Evolution SE

The AEM 24-6110C Dual Chamber Air Intake System is engineered to maximize horsepower and torque gains for specific Honda Accord models by utilizing a patented dual chamber design. The restrictive factory air filter and air intake housing are replaced with this AEM dual chamber air intake system. Air enters the system through an oversized AEM Dryflow synthetic washable air filter for outstanding air flow, filtration and performance. The sound your engine makes when accelerating is also modified to a fuller, more aggressive resonance allowing you to hear and feel the horsepower upgrade. The intake tubing is constructed from mandrel-bent aluminum featuring a durable gunmetal gray powder coated finish. This air intake system was developed to accommodate the engine's factory emissions control devices including the engine breather hose. The tapered cylinder shaped AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). The air intake system is backed by AEM's Lifetime Limited Warranty. Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the 24-6110C vehicle applications to determine the legal status for each vehicle.Installation InstructionsThis Part Fits: Year Make Model Submodel 2003-2006 Honda Accord EX 2007 Honda Accord EX-L 2003-2006 Honda Accord LX 2005 Honda Accord SE

The AEM 22-425P Performance Short Ram Air Intake System has been engineered to be an affordable and easy way to boost the horsepower and torque of your engine. The restrictive factory air filter and air intake housing are replaced with this AEM air intake system which was designed, tuned and dyno-tested to fit specific Dodge Neon SRT-4 models. Air enters the system through an oversized AEM Dryflow synthetic washable air filter for outstanding air flow, filtration and performance. The sound your engine makes when accelerating is also modified to a fuller, more aggressive resonance allowing you to hear and feel the horsepower upgrade. The intake tubing is constructed from mandrel-bent aluminum featuring a durable chrome-like finish. This air intake system was developed to accommodate the engine's factory emissions control devices including the engine breather hose, IAT sensor and vacuum line. The tapered cylinder shaped AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). The air intake system is easy to install with commonly available tools and it is backed by AEM's Lifetime Limited Warranty. Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the 22-425P vehicle applications to determine the legal status for each vehicle.Installation InstructionsThis Part Fits: Year Make Model Submodel 2003-2005 Dodge Neon SRT-4

The AEM 22-547B Performance Short Ram Air Intake System has been engineered to be an affordable and easy way to boost the horsepower and torque of your engine. The restrictive factory air filter and air intake housing are replaced with this intake system, allowing air to enter the system through an oversized AEM Dryflow synthetic washable air filter for outstanding air flow, filtration and performance. The sound your engine makes when accelerating is also modified to a fuller, more aggressive resonance allowing you to hear and feel the horsepower upgrade. The air filter is protected by a heat shield which is designed to protect the filter from hot engine air in order to preserve horsepower gains. The intake tubing is constructed from mandrel-bent aluminum featuring a durable blue powder coated finish. This air intake system was developed to accommodate the engine's factory emissions control devices including the mass air flow sensor and breather hose. The tapered cylinder shaped AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). The air intake system is easy to install with commonly available tools. Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the 22-547B vehicle applications to determine the legal status for each vehicle.Installation InstructionsThis Part Fits: Year Make Model Submodel 2005 Nissan 350Z 35th Anniversary Edition 2003-2006 Nissan 350Z Base 2003-2006 Nissan 350Z Enthusiast 2005-2006 Nissan 350Z Grand Touring 2003-2005 Nissan 350Z Performance 2003-2006 Nissan 350Z Touring 2003-2006 Nissan 350Z Track

The AEM TCM (Throttle Control Module) instantly puts YOU in CONTROL. Get rid of laggy acceleration and dead pedal with an AEM TCM. Wirelessly program your own throttle curves with your Phone when using the AEM TCM APP. You can use one of 5 preset throttle curves or customize and save up to 3 of your own. Be in CONTROL and dial in your throttle curve just the way you want. Installation is plug & play through your accelerator pedal harness. Phone APP support will be for both Andriod and iOS. Our APP is user-friendly with intuitive functions to help you take CONTROL. More vehicle application support to come.This Part Fits: Year Make Model Submodel 2003-2020 Toyota 4Runner Limited 2020 Toyota 4Runner Nightshade 2003-2009 Toyota 4Runner Sport 2003-2020 Toyota 4Runner SR5 2018-2020 Toyota 4Runner SR5 Premium 2010-2016 Toyota 4Runner Trail 2017-2020 Toyota 4Runner TRD Off-Road 2018-2020 Toyota 4Runner TRD Off-Road Premium 2015-2020 Toyota 4Runner TRD Pro 2020 Toyota 4Runner Venture 2007-2014 Toyota FJ Cruiser Base 2008 Toyota FJ Cruiser Trail Teams Special Edition 2007 Toyota FJ Cruiser TRD Special Edition 2003-2015 Toyota Tacoma Base 2016-2020 Toyota Tacoma Limited 2003-2015 Toyota Tacoma Pre Runner 2003-2004 Toyota Tacoma S-Runner 2016-2020 Toyota Tacoma SR 2016-2020 Toyota Tacoma SR5 2016-2020 Toyota Tacoma TRD Off-Road 2015,2017-2020 Toyota Tacoma TRD Pro 2016-2020 Toyota Tacoma TRD Sport 2005-2013 Toyota Tacoma X-Runner

The AEM 21-485B Performance Cold Air Intake System produces horsepower and torque gains by replacing your vehicle's restrictive factory air filter and air intake housing. This air intake system was designed, tuned and dyno-tested to fit specific Mazda RX-8 models. Air enters the system through an oversized AEM Dryflow synthetic washable air filter for outstanding air flow, filtration and performance. The air filter is located above the passenger side wheel well which is designed to reduce intake air temperature and increase horsepower. The intake tubing is comprised of series of gradually expanding inlet pipes including mandrel-bent aluminum featuring a durable blue powder coated finish. This air intake system was developed to accommodate the engine's factory emissions control devices including the mass air flow sensor and breather hoses. The cone shaped AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). The air intake system is backed by AEM's Lifetime Limited Warranty. Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards while others are 50 state legal. View the 21-485B vehicle applications to determine the legal status for each vehicle.Installation InstructionsUser 1This Part Fits: Year Make Model Submodel 2008 Mazda RX-8 40th Anniversary Edition 2004-2007 Mazda RX-8 Base 2008-2011 Mazda RX-8 Grand Touring 2009-2011 Mazda RX-8 R3 2005 Mazda RX-8 Shinka 2008-2011 Mazda RX-8 Sport 2008-2009 Mazda RX-8 Touring

The AEM 21-485R Performance Cold Air Intake System produces horsepower and torque gains by replacing your vehicle's restrictive factory air filter and air intake housing. This air intake system was designed, tuned and dyno-tested to fit specific Mazda RX-8 models. Air enters the system through an oversized AEM Dryflow synthetic washable air filter for outstanding air flow, filtration and performance. The air filter is located above the passenger side wheel well which is designed to reduce intake air temperature and increase horsepower. The intake tubing is constructed from mandrel-bent aluminum featuring a durable red powder coated finish with a series of gradually expanding inlet pipes. This air intake system was developed to accommodate the engine's factory emissions control devices including the mass air flow sensor and breather hoses. The tapered cone shaped AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). The air intake system is backed by AEM's Lifetime Limited Warranty. Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards while others are 50 state legal. View the 21-485R vehicle applications to determine the legal status for each vehicle.Installation InstructionsUser 1This Part Fits: Year Make Model Submodel 2008 Mazda RX-8 40th Anniversary Edition 2004-2007 Mazda RX-8 Base 2008-2011 Mazda RX-8 Grand Touring 2009-2011 Mazda RX-8 R3 2005 Mazda RX-8 Shinka 2008-2011 Mazda RX-8 Sport 2008-2009 Mazda RX-8 Touring

The AEM 21-485C Performance Cold Air Intake System produces horsepower and torque gains by replacing your vehicle's restrictive factory air filter and air intake housing. This air intake system was designed, tuned and dyno-tested to fit specific Mazda RX-8 models. Air enters the system through an oversized AEM Dryflow synthetic washable air filter for outstanding air flow, filtration and performance. The air filter is located in above the passenger side wheel well which is designed to reduce intake air temperature and increase horsepower. The intake tubing is constructed from series of gradually expanding aluminum inlet pipes featuring a durable gunmetal gray powder coated finish. This air intake system was developed to accommodate the engine's factory emissions control devices including the mass air flow sensor and breather hoses. The cone shaped AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). The air intake system is backed by AEM's Lifetime Limited Warranty. Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards while others are 50 state legal. View the 21-485C vehicle applications to determine the legal status for each vehicle.Installation InstructionsUser 1This Part Fits: Year Make Model Submodel 2008 Mazda RX-8 40th Anniversary Edition 2004-2007 Mazda RX-8 Base 2008-2011 Mazda RX-8 Grand Touring 2009-2011 Mazda RX-8 R3 2005 Mazda RX-8 Shinka 2008-2011 Mazda RX-8 Sport 2008-2009 Mazda RX-8 Touring

The AEM 21-513P Performance Cold Air Intake System is designed to produce horsepower and torque gains by replacing your vehicle's restrictive factory air filter and air intake housing. This air intake system is designed, tuned and dyno-tested to fit specific Acura TL models. Air enters the system through an oversized AEM Dryflow synthetic washable air filter for outstanding air flow, filtration and performance. The air filter is located in the previous air box space which is designed to reduce intake air temperature and increase horsepower. The intake tubing is constructed from mandrel-bent aluminum featuring a durable chrome-like finish. This air intake system was developed to accommodate the engine's factory emissions control devices including the replacement silicone breather hose. The cone shaped AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). The air intake system is designed for easy installation with commonly available tools and it is backed by AEM's Lifetime Limited Warranty. Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards while others are CARB exempt and 50 state legal. Check the AEM catalog or website for vehicle applications and specific CARB status for each vehicle and air intake.Installation InstructionsThis Part Fits: Year Make Model Submodel 2004-2008 Acura TL Base 2007-2008 Acura TL Type-S

The AEM 21-513C Performance Cold Air Intake System produces horsepower and torque gains by replacing your vehicle's restrictive factory air filter and air intake housing. This air intake system was designed, tuned and dyno-tested to fit specific Acura TL models. Air enters the system through an oversized AEM Dryflow synthetic washable air filter for outstanding air flow, filtration and performance. The air filter is located in the original air box space which is designed to reduce intake air temperature and increase horsepower. The intake tubing is constructed from mandrel-bent aluminum featuring a durable gunmetal gray powder coated finish. This air intake system was developed to accommodate the engine's factory emissions control devices including the replacement silicone breather hose. The cone shaped AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). The air intake system is easy to install with commonly available tools and it is backed by AEM's Lifetime Limited Warranty. Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards while others are 50 state legal. View the 21-513C vehicle applications to determine the legal status for each vehicle.Installation InstructionsThis Part Fits: Year Make Model Submodel 2004-2008 Acura TL Base 2007-2008 Acura TL Type-S

The AEM 21-475P Performance Cold Air Intake System produces horsepower and torque gains by replacing your vehicle's restrictive factory air filter and air intake housing. This air intake system was designed, tuned and dyno-tested to fit specific Subaru Outback XT and Legacy GT models. Air enters the system through an oversized AEM Dryflow synthetic washable air filter for outstanding air flow, filtration and performance. The air filter is located in the original air box space and is protected by a heat shield which is designed to reduce intake air temperature and increase horsepower. The intake tubing is constructed from mandrel-bent aluminum featuring a durable chrome-like finish. This air intake system was developed to accommodate the engine's factory emissions control devices including the mass air flow sensor. The tapered cylinder shaped AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). The air intake system is easy to install with commonly available tools and it is backed by AEM's Lifetime Limited Warranty. Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the 21-475P vehicle applications to determine the legal status for each vehicle.Installation InstructionsThis Part Fits: Year Make Model Submodel 2005-2006 Subaru Legacy GT 2005 Subaru Legacy GT Limited 2006 Subaru Legacy GT spec.B 2005-2006 Subaru Outback XT 2005-2006 Subaru Outback XT Limited

The AEM 21-532P Performance Cold Air Intake System produces horsepower and torque gains by replacing your vehicle's restrictive factory air filter and air intake housing. This air intake system was designed, tuned and dyno-tested to fit specific Chevrolet Cobalt models. Air enters the system through an oversized AEM Dryflow synthetic washable air filter for outstanding air flow, filtration and performance. The air filter is relocated to the driver-side wheel well which is designed to reduce intake air temperature and increase horsepower. The intake tubing is constructed from mandrel-bent aluminum featuring a durable mirror-polished powder coated finish. This air intake system was developed to accommodate the engine's factory emissions control devices including the mass air flow sensor. The tapered cylinder shaped AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). The air intake system is backed by AEM's Lifetime Limited Warranty. Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the 21-532P vehicle applications to determine the legal status for each vehicle.Installation InstructionsUser 1This Part Fits: Year Make Model Submodel 2005-2007 Chevrolet Cobalt SS

The AEM 21-491C Performance Cold Air Intake System produces horsepower and torque gains by replacing your vehicle's restrictive factory air filter and air intake housing. This air intake system was designed, tuned and dyno-tested to fit specific Mazda 6 models. Air enters the system through an oversized AEM Dryflow synthetic washable air filter for outstanding air flow, filtration and performance. The air filter is relocated to the driver-side wheel well which is designed to reduce intake air temperature and increase horsepower. The intake tubing is constructed from mandrel-bent aluminum featuring a durable gunmetal gray powder coated finish. This air intake system was developed to accommodate the engine's factory emissions control devices including the mass air flow sensor and crankcase breather hose. The tapered cylinder shaped AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). The air intake system is backed by AEM's Lifetime Limited Warranty. Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the 21-491C vehicle applications to determine the legal status for each vehicle.Installation InstructionsThis Part Fits: Year Make Model Submodel 2005-2008 Mazda 6 i

The AEM 21-477P Performance Cold Air Intake System produces horsepower and torque gains by replacing your vehicle's restrictive factory air filter and air intake housing. This air intake system was designed, tuned and dyno-tested to fit specific Subaru Impreza WRX/WRX STI, Forester Turbo and SAAB 9-2X models. Air enters the system through an oversized AEM Dryflow synthetic washable air filter for outstanding air flow, filtration and performance. The air filter is relocated to the passenger-side wheel well which is designed to reduce intake air temperature and increase horsepower. The intake tubing is constructed from mandrel-bent aluminum featuring a durable chrome-like finish. This air intake system was developed to accommodate the engine's factory emissions control devices including the mass air flow sensor. The tapered cylinder shaped AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). The air intake system is backed by AEM's Lifetime Limited Warranty. Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the 21-477P vehicle applications to determine the legal status for each vehicle.Installation InstructionsThis Part Fits: Year Make Model Submodel 2006 Saab 9-2X 2.5i 2006 Saab 9-2X Aero 2004-2005 Subaru Forester XT 2005 Subaru Forester XT Premium 2006-2007 Subaru Impreza WRX 2006-2007 Subaru Impreza WRX Limited 2004-2007 Subaru Impreza WRX STI 2007 Subaru Impreza WRX STI Limited 2006-2007 Subaru Impreza WRX TR

The AEM 21-677C Performance Cold Air Intake System produces horsepower and torque gains by replacing your vehicle's restrictive factory air filters and air intake housings. This air intake system was designed, tuned and dyno-tested to fit specific Nissan 350Z models. Air enters the system through dual oversized AEM Dryflow synthetic washable air filters for outstanding air flow, filtration and performance. The air filters are located in the original air box spaces and are protected by heat shields which are designed to reduce intake air temperature and increase horsepower. The intake tubes are constructed from mandrel-bent aluminum featuring a durable gunmetal gray powder coated finish. This air intake system was developed to accommodate the engine's factory emissions control devices including the mass air flow sensors and crankcase vent tube. The dual tapered cylinder shaped AEM Dryflow air filters are made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). The air intake system is easy to install with commonly available tools and it is backed by AEM's Lifetime Limited Warranty. Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards while others are 50 state legal. View the 21-677C vehicle applications to determine the legal status for each vehicle.Installation InstructionsThis Part Fits: Year Make Model Submodel 2007-2008 Nissan 350Z Base 2007-2008 Nissan 350Z Enthusiast 2007-2008 Nissan 350Z Grand Touring 2007-2008 Nissan 350Z Nismo 2007-2008 Nissan 350Z Touring

AEM Charge Pipes are a free-flowing, mandrel-bent aluminum tube charge pipe kit designed to replace the restrictive factory intercooler piping on specific turbo charged BMW models and offer a wide range of performance customization options. AEM charge pipes have been engineered to reduce turbo charged air pressure loss as well as dramatically increase air flow from the turbo through the intercooler. The charge pipes are constructed from lightweight aluminum with a durable gunmetal gray powder coated finish. For additional horsepower gains and improved engine compartment aesthetics, AEM offers a wide range of Cold Air Intake System that can be installed into your vehicle as well. The charge pipe kit is easy to install with commonly available tools and it is backed by AEM’s Lifetime Limited Warranty.Installation InstructionsThis Part Fits: Year Make Model Submodel 2007-2010 BMW 335i Base

The AEM Performance Cold Air Intake System produces horsepower and torque gains by replacing your vehicle's restrictive factory air filter and air intake housing. This air intake system was designed, tuned and dyno-tested to fit specific models. Air enters the system through an oversized AEM Dryflow synthetic washable air filter for outstanding air flow, filtration and performance. The air filter is located in the original air box space and is protected by a heat shield which is designed to reduce intake air temperature and increase horsepower. The air intake tube is constructed from mandrel-bent aluminum featuring a durable gunmetal gray powder coated finish. This air intake system was developed to accommodate the engine's factory emissions control devices including the mass airflow sensor and breather tube. The tapered cylinder shaped AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). The air intake system is easy to install with commonly available tools and it is backed by AEM's Lifetime Limited Warranty. Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the vehicle applications to determine the legal status for each vehicle.Installation InstructionsTechnical DrawingThis Part Fits: Year Make Model Submodel 2007-2011 Toyota Camry LE 2007-2011 Toyota Camry SE 2007-2011 Toyota Camry XLE 2009-2011 Toyota Venza Base 2012-2014 Toyota Venza LE 2012-2015 Toyota Venza Limited 2012-2015 Toyota Venza XLE

This Performance Air Intake System allows your engine to breathe more air compared to the restrictive factory air intake housing. It is designed, tuned and dyno-tested to produce more horsepower and torque. Air enters the system from the factory fresh air inlets. through replacement air duct and into a roto-molded, aerodynamic AEM air box containing an oversized AEM Dryflow synthetic washable air filter for outstanding air flow, filtration and performance.The cone shaped AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). This Air Intake System is backed by AEM's Lifetime Limited Warranty. Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the vehicle applications to determine the legal status for each vehicle.Installation InstructionsUser 1This Part Fits: Year Make Model Submodel 2007-2013 BMW 328i Base 2009-2010,2012-2013 BMW 328i xDrive Base 2007-2008 BMW 328xi Base

The AEM 21-682C Performance Cold Air Intake System produces horsepower and torque gains by replacing your vehicle's restrictive factory air filter and air intake housing. This air intake system was designed, tuned and dyno-tested to fit specific Chevrolet Cobalt models. Air enters the system through an oversized AEM Dryflow synthetic washable air filter for outstanding air flow, filtration and performance. The air filter is relocated to the passenger-side wheel well which is designed to reduce intake air temperature and increase horsepower. The intake tubing is constructed from mandrel-bent aluminum featuring a durable gunmetal gray powder coated finish. This air intake system was developed to accommodate the engine's factory emissions control devices including the mass air flow sensor and PCV hose. The tapered cylinder shaped AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). The air intake system is backed by AEM's Lifetime Limited Warranty. Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the 21-682C vehicle applications to determine the legal status for each vehicle.Installation InstructionsUser 1This Part Fits: Year Make Model Submodel 2008-2010 Chevrolet Cobalt SS

The AEM 21-478WR Performance Cold Air Intake System produces horsepower and torque gains by replacing your vehicle's restrictive factory air filter and air intake housing. This air intake system was designed, tuned and dyno-tested to fit specific Subaru WRX, WRX STI, Impreza WRX and Impreza WRX STI models. Air enters the system through an oversized AEM Dryflow synthetic washable air filter for outstanding air flow, filtration and performance. The air filter is located in the original air box space and is protected by a heat shield which is designed to reduce intake air temperature and increase horsepower. The intake tubing is constructed from mandrel-bent aluminum featuring a durable textured red powder coated finish. This air intake system was developed to accommodate the engine's factory emissions control devices including the mass air flow sensor. The cylinder shaped AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). The air intake system is easy to install with commonly available tools and it is backed by AEM's Lifetime Limited Warranty. Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards while others are 50 state legal. View the 21-478WR vehicle applications to determine the legal status for each vehicle.Installation InstructionsUser 1This Part Fits: Year Make Model Submodel 2011 Subaru Impreza 2.5i 2011 Subaru Impreza 2.5i Premium 2011 Subaru Impreza Outback Sport 2008-2014 Subaru Impreza WRX 2010-2014 Subaru Impreza WRX Limited 2009-2014 Subaru Impreza WRX Premium 2008-2014 Subaru Impreza WRX STI 2011-2014 Subaru Impreza WRX STI Limited 2010 Subaru Impreza WRX STI Special Edition

AEM cold air intake systems are designed to increase horsepower and torque. The system includes an oversized AEM DRYFLOW synthetic washable air filter, engineered to provide outstanding airflow, filtration, and performance, and also features a mandrel-bent aluminum intake tube and high quality hardware. The oversized, conical filter design allows you to go up to 100,000 miles between filter services under normal highway driving conditions. A custom heat shield helps protect intake air from the high temperature of your engine bay, and the factory fresh air duct attaches to the heat shield. The entire system can typically be installed in less than 90 minutes. Some intakes are not legal for sale or use on any pollution controlled motor vehicle in California. See the product specifications for CARB status on each part for a specific vehicle.Installation InstructionsUser 1This Part Fits: Year Make Model Submodel 2008-2014 Subaru Impreza WRX 2010-2014 Subaru Impreza WRX Limited 2009-2014 Subaru Impreza WRX Premium 2008-2014 Subaru Impreza WRX STI 2011-2014 Subaru Impreza WRX STI Limited 2010 Subaru Impreza WRX STI Special Edition

The AEM 21-8223DP Brute Force Air Intake System produces horsepower and torque gains by replacing the vehicle's restrictive factory air filter and air intake housing. This air intake system was designed, tuned and dyno-tested to fit specific Dodge Charger and Challenger models. Air enters the system through an extra-large AEM Dryflow synthetic washable air filter for outstanding air flow, filtration and performance. The air filter is relocated above the driver's side wheel well which is designed to reduce intake air temperature and increase horsepower. The intake tubing is constructed from mandrel-bent aluminum featuring a durable chrome-like finish. This air intake system was developed to accommodate the engine's factory emissions control devices including the IAT sensor and crank case breather hose. The cylinder shaped AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). The air intake system is backed by AEM's Lifetime Limited Warranty. Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards while others are 50 state legal. View the 21-8223DP vehicle applications to determine the legal status for each vehicle.Installation InstructionsUser 1This Part Fits: Year Make Model Submodel 2009-2017 Dodge Challenger R/T 2012 Dodge Challenger R/T Classic 2015-2016 Dodge Challenger R/T Plus 2016 Dodge Challenger R/T Plus Shaker 2016 Dodge Challenger R/T Shaker 2008-2010 Dodge Challenger SRT8 2017 Dodge Challenger T/A 2017 Dodge Charger Daytona 2009-2017 Dodge Charger Pursuit 2009-2017 Dodge Charger R/T 2015-2016 Dodge Charger R/T Road & Track 2009-2014 Dodge Charger SE 2009-2010 Dodge Charger SRT8

The AEM 21-698C Performance Cold Air Intake System produces horsepower and torque gains by replacing your vehicle's restrictive factory air filter and air intake housing. This air intake system was designed, tuned and dyno-tested to fit specific Mitsubishi Lancer Ralliart models. Air enters the system through an oversized AEM Dryflow synthetic washable air filter for outstanding air flow, filtration and performance. The air filter is located in the original air box space and is protected by a replacement air box with a logo embossed aluminum lid which is designed to reduce intake air temperature and increase horsepower. The intake tubing is constructed from mandrel-bent aluminum featuring a durable black powder coated finish. This air intake system was developed to accommodate the engine's factory emissions control devices including the mass air flow sensor, waste gate solenoid and valve cover breather hose as well as a replacement AEM filter minder. The cylinder shaped AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). The air intake system is backed by AEM's Lifetime Limited Warranty. Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards while others are 50 state legal. View the 21-698C vehicle applications to determine the legal status for each vehicle.Installation InstructionsUser 1Technical BulletinThis Part Fits: Year Make Model Submodel 2009-2014 Mitsubishi Lancer Ralliart 2010-2011 Mitsubishi Lancer Ralliart Sportback

The AEM-29-0004WR performance strut bar provides additional vehicle stability on various Subaru Impreza WRX and STI models. AEM strut bars are constructed from 1-1/2 inch steel tubing, providing great strength and low weight which gives you a true racing option and a more professional alternative to many hinged or weaker strut bars on the market. The AEM-29-0004WR performance strut bar comes in an attractive red powder coat finish with the AEM logo giving you a clean high-performance look under the hood. This strut bar is easy to install using the existing factory mounting points.Installation InstructionsThis Part Fits: Year Make Model Submodel 2009-2014 Subaru Impreza WRX 2010-2014 Subaru Impreza WRX Limited 2009-2014 Subaru Impreza WRX Premium 2009-2014 Subaru Impreza WRX STI 2011-2014 Subaru Impreza WRX STI Limited 2010 Subaru Impreza WRX STI Special Edition

The AEM 21-763C Performance Cold Air Intake System produces horsepower and torque gains by replacing your vehicle's restrictive factory air filter and air intake housing. This air intake system was designed, tuned and dyno-tested to fit specific Volkswagen Jetta models. Air enters the system through an oversized AEM Dryflow synthetic washable air filter for outstanding air flow, filtration and performance. The air filter is located in the original air box location and is protected by a heat shield which is designed to reduce intake air temperature and increase horsepower. The intake tubing is constructed from mandrel-bent aluminum featuring a durable gunmetal gray powder coated finish. This air intake system was developed to accommodate the engine's factory emissions control devices including the mass air flow sensor and vacuum line. The tapered cylinder shaped AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). The air intake system is easy to install with commonly available tools and it is backed by AEM's Lifetime Limited Warranty. Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the 21-763C vehicle applications to determine the legal status for each vehicle.Installation InstructionsUser 1This Part Fits: Year Make Model Submodel 2011 Volkswagen Jetta Base 2012-2014 Volkswagen Jetta GLI 2011-2014 Volkswagen Jetta S 2010-2014 Volkswagen Jetta TDI 2010 Volkswagen Jetta TDI Cup Edition 2012-2014 Volkswagen Jetta TDI Premium 2015-2016 Volkswagen Tiguan R-Line 2015-2017 Volkswagen Tiguan S 2015-2016 Volkswagen Tiguan SE 2015-2017 Volkswagen Tiguan SEL 2017 Volkswagen Tiguan Sport 2017 Volkswagen Tiguan Wolfsburg Edition

The AEM 21-702C Performance Cold Air Intake System produces horsepower and torque gains by replacing your vehicle's restrictive factory air filter and air intake housing. This air intake system was designed, tuned and dyno-tested to fit specific Ford Focus models. Air enters the system through an oversized AEM Dryflow synthetic washable air filter for outstanding air flow, filtration and performance. The air filter is relocated to the driver-side wheel well which is designed to reduce intake air temperature and increase horsepower. The intake tubing is constructed from mandrel-bent aluminum featuring a durable gunmetal gray powder coated finish. This air intake system was developed to accommodate the engine's factory emissions control devices including the PCV hose and mass air flow sensor (which includes an AEM extension harness). The tapered cylinder shaped AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). The air intake system is backed by AEM's Lifetime Limited Warranty. Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the 21-702C vehicle applications to determine the legal status for each vehicle.Installation InstructionsUser 1This Part Fits: Year Make Model Submodel 2012 Ford Focus S 2012 Ford Focus SE 2012 Ford Focus SEL 2012 Ford Focus Titanium

The AEM 21-715C Performance Cold Air Intake System produces horsepower and torque gains by replacing your vehicle's restrictive factory air filter and air intake housing. This air intake system was designed, tuned and dyno-tested to fit specific Hyundai Veloster models. Air enters the system through an oversized AEM Dryflow synthetic washable air filter for outstanding air flow, filtration and performance. The air filter is relocated to the driver-side wheel well which is designed to reduce intake air temperature and increase horsepower. The intake tubing is constructed from mandrel-bent aluminum featuring a durable gunmetal gray powder coated finish. This air intake system was developed to accommodate the engine's factory emissions control devices including a replacement silicone breather hose. The tapered cylinder shaped AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). The air intake system is backed by AEM's Lifetime Limited Warranty. Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the 21-715C vehicle applications to determine the legal status for each vehicle.Installation InstructionsUser 1This Part Fits: Year Make Model Submodel 2012-2017 Hyundai Veloster Base 2014-2015 Hyundai Veloster RE:FLEX 2017 Hyundai Veloster Turbo 2017 Hyundai Veloster Turbo R-Spec 2017 Hyundai Veloster Value Edition

The AEM 21-715P Performance Cold Air Intake System produces horsepower and torque gains by replacing your vehicle's restrictive factory air filter and air intake housing. This air intake system was designed, tuned and dyno-tested to fit specific Hyundai Veloster models. Air enters the system through an oversized AEM Dryflow synthetic washable air filter for outstanding air flow, filtration and performance. The air filter is relocated to the driver-side wheel well which is designed to reduce intake air temperature and increase horsepower. The intake tubing is constructed from mandrel-bent aluminum featuring a durable chrome-like finish. This air intake system was developed to accommodate the engine's factory emissions control devices including a replacement silicone breather hose. The tapered cylinder shaped AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). The air intake system is backed by AEM's Lifetime Limited Warranty. Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the 21-715P vehicle applications to determine the legal status for each vehicle.Installation InstructionsUser 1This Part Fits: Year Make Model Submodel 2012-2017 Hyundai Veloster Base 2014-2015 Hyundai Veloster RE:FLEX 2017 Hyundai Veloster Turbo 2017 Hyundai Veloster Turbo R-Spec 2017 Hyundai Veloster Value Edition

The AEM 21-750 Performance Cold Air Intake System produces horsepower and torque gains by replacing your vehicle's restrictive factory air filter and air intake housing. This air intake system was designed, tuned and dyno-tested to fit specific Audi A4 and A5 models. Air enters the system through an oversized AEM Dryflow synthetic washable air filter for outstanding air flow, filtration and performance. The air filter is located in the original air box location and can optionally be protected by an AEM embossed heat shield which is designed to reduce intake air temperature and increase horsepower. This air intake system was developed to accommodate the engine's factory emissions control devices including the mass air flow sensor. The tapered cylinder shaped AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). The air intake system is easy to install with commonly available tools and it is backed by AEM's Lifetime Limited Warranty. Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the AEM 21-750 vehicle applications to determine the legal status for each vehicle.Installation InstructionsUser 1This Part Fits: Year Make Model Submodel 2013-2014 Audi A4 Base 2015-2016 Audi A4 Premium 2015-2016 Audi A4 Premium Plus 2015 Audi A4 Prestige 2014 Audi A5 Cabriolet

The AEM 21-781DS Performance Cold Air Intake System produces horsepower and torque gains by replacing your vehicle's restrictive factory air filter and air intake housing. This air intake system was designed, tuned and dyno-tested to fit specific Mercedes Benz CLA250 models. Air enters the system from the factory fresh air inlets, through replacement air ducts and into a roto-molded, aerodynamic AEM air box containing an oversized AEM Dryflow synthetic washable air filter for outstanding air flow, filtration and performance. This air intake system was developed to accommodate the engine's factory emissions control devices including the ECU. The tapered cylinder shaped AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). The air intake system is easy to install with commonly available tools and it is backed by AEM's Lifetime Limited Warranty. Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the 21-781DS vehicle applications to determine the legal status for each vehicle.Installation InstructionsUser 1This Part Fits: Year Make Model Submodel 2014-2019 Mercedes-Benz CLA250 4Matic 2014-2019 Mercedes-Benz CLA250 Base 2015-2020 Mercedes-Benz GLA250 4Matic 2015-2020 Mercedes-Benz GLA250 Base