Experience a new level of performance with the K&N 05 Pontiac GTO intake kit, designed exclusively for the 2005 Pontiac GTO V8. This high-performance intake system increases airflow to your engine, resulting in a guaranteed boost in horsepower and torque, improved throttle response, and a more aggressive engine sound. Whether you're a performance enthusiast or using it for daily driving, every component is built for quality and durability.Key Features and Benefits Durable HDPE rotationally-molded tube that maximizes airflow Washable and reusable high-flow air filter featuring oiled cotton media Oversized, conical filter design providing up to 100,000 miles between services Custom heat shield that protects intake air from engine heat Quick and simple installation in less than 60 minutes with basic hand tools Enhanced engine performance with a guaranteed increase in horsepower and torque This Part Fits Year: 2005 Make: Pontiac Model: GTO Submodel: Base Please note: This intake kit is not legal for use on any pollution-controlled motor vehicle in California. For complete CARB status information for your specific vehicle, please refer to the product specifications.Discover more innovative performance parts in our K&N Engineering collection and elevate your ride today.

Experience the thrill of peak performance with this advanced Dodge Dakota V8 intake kit designed to not only boost engine power but also enhance your overall driving experience. Created specifically as a performance intake kit for the Dodge Dakota, its innovative HDPE rotationally-molded tube increases airflow, helping you gain up to 7–10 HP and 8–12 lb-ft of torque. Enjoy improved throttle response and a refined engine note that elevate your ride, all while benefiting from an easy installation process and lasting durability. Discover additional performance parts in our Air Intake Systems collection.Key Features Gain up to 7–10 HP and 8–12 lb-ft of torque for a noticeable performance boost. Enjoy enhanced throttle response and an improved engine sound for a more exhilarating drive. Constructed from high-density polyethylene (HDPE) to optimize airflow. Comes with a washable, reusable High-Flow Air Filter featuring oiled cotton media. Oversized, conical filter design allows for maintenance intervals of up to 100,000 miles. Custom heat shield protects intake air from the high temperatures in the engine bay. Typically installs in less than 60 minutes using simple hand tools. Note: Some intakes, including this K&N intake kit for the Dodge Dakota, may not be legal for use on pollution-controlled vehicles in California—please review the CARB status in the product specifications. Installation is straightforward, with clear instructions to help you upgrade your vehicle quickly. Always check local regulations before use to ensure compliance with emission standards, especially in California.This part fits vehicles as shown below: Year Make Model Submodel 2009-2010 Dodge Dakota Big Horn 2005-2010 Dodge Dakota Laramie 2009-2010 Dodge Dakota Lone Star 2005-2008 Dodge Dakota SLT 2005,2008 Dodge Dakota Sport 2005-2007,2010 Dodge Dakota ST 2008 Dodge Dakota SXT 2008 Dodge Dakota TRX 2008-2010 Dodge Dakota TRX4 2006 Mitsubishi Raider DuroCross 2007 Mitsubishi Raider LS 2007 Mitsubishi Raider SE 2006 Mitsubishi Raider XLS

Upgrade your engine performance with our high-performance intake system, designed to deliver increased horsepower and torque. This innovative Ford F-Series performance intake solution offers an optimal experience for buyers seeking a K&N intake kit for the Ford Super Duty, enhancing airflow while providing improved throttle response and a dynamic engine sound. Discover our collection of high-performance products in our Air Intake Systems selection.Key Features Rotationally molded high-density polyethylene (HDPE) tube for maximum airflow Washable, reusable High-Flow Air Filter featuring premium oiled cotton media Custom heat shield that protects intake air from high engine bay temperatures Simple installation in less than 60 minutes Extended service life – up to 100,000 miles under typical highway conditions CARB compliance note: Some models are not legal for use on pollution-controlled vehicles in California Technical Details & Fitment 2005 Ford F-250 Super Duty – Harley-Davidson Edition 2005-2006 Ford F-250 Super Duty – King Ranch, Lariat, XL, XLT 2005 Ford F-350 Super Duty – Harley-Davidson Edition 2005-2006 Ford F-350 Super Duty – King Ranch, Lariat, XL, XLT Helpful Resources View Installation Instructions User Manual

Experience a noticeable boost in power and efficiency with our high-performance intake system engineered specifically for the Ford F250 V8-5.4L. This innovative kit is designed as a premium “K&N Ford F250 intake kit” and also serves as a “05-06 Ford F250 performance intake kit” and “Ford F250 5.4L intake system” to help maximize horsepower, torque, and throttle response. Constructed with a high-density polyethylene (HDPE) rotationally molded tube and paired with a washable, reusable high-flow air filter, this system delivers consistent airflow improvements while ensuring long-lasting durability. Installation is fast and straightforward, so you can upgrade your engine in under 60 minutes.Key Performance Features Guaranteed increases in horsepower and torque Enhanced airflow thanks to a precision-engineered HDPE tube Washable, reusable high-flow air filter with up to 100,000 miles of service life Simple installation process (typically under 60 minutes) Custom heat shield to protect intake air from engine heat Legal & Warranty Information Not legal on any pollution-controlled motor vehicle in California; please verify CARB status Supported by the K&N No-Hassle Lifetime Limited Warranty For detailed guidance, please review our Installation Instructions and User Manual.Fits Year Make Model Submodel 2005 Ford Excursion Eddie Bauer 2005 Ford Excursion Limited 2005 Ford Excursion XLS 2005 Ford Excursion XLT 2005-2006 Ford F-250 Super Duty King Ranch 2005-2006 Ford F-250 Super Duty Lariat 2005-2006 Ford F-250 Super Duty XL 2005-2006 Ford F-250 Super Duty XLT 2005-2006 Ford F-350 Super Duty King Ranch 2005-2006 Ford F-350 Super Duty Lariat 2005-2006 Ford F-350 Super Duty XL 2005-2006 Ford F-350 Super Duty XLT Explore our Air Intake Systems collection for additional performance upgrades and accessories to complete your vehicle’s transformation.

Enhance your diesel engine’s performance with the K&N 05-06 GM 2500HD/3500HD V8-6.6L Turbo Diesel Performance Intake Kit. This innovative kit boosts horsepower and torque while improving throttle response with a durable, high-flow design that elevates overall performance.• Durable high-density polyethylene (HDPE) molded tube paired with a custom heat shield for optimal airflow• Washable, reusable high-flow air filter featuring oiled cotton media—serviceable up to 100,000 miles• Quick, user-friendly installation typically completed in under 60 minutes• CARB emissions compliance information provided for proper legal use• Standard warranty details apply—please review specifics for your vehicleDesigned for serious performance gains, this intake kit optimizes airflow and enhances engine efficiency, delivering noticeable improvements in throttle response and increased power. Built with advanced technology, it ensures reliable operation while meeting strict emission standards—a must-have upgrade for any diesel performance enthusiast.Compatible Vehicles• 2005 Chevrolet Silverado 2500HD (Base, LS, LT, WT)• 2005-2006 Chevrolet Silverado 3500 series• Various GMC Sierra models designed for both HD and Classic trimsFor more high-performance air intake options, visit our Air Intake Systems collection at https://www.everythingtruckparts.com/collections/air-intake-systems. Enjoy enhanced driving dynamics with a trusted K&N intake kit—designed for enthusiasts who demand quality and reliability.

Experience a powerful engine upgrade with the K&N 05-06 Honda Ridgeline performance intake kit. This performance intake for the Honda Ridgeline is designed to maximize airflow, delivering noticeable increases in horsepower and torque, while sharpening throttle response and creating a more aggressive engine note. Enjoy these benefits:• Guaranteed increase in horsepower and torque• Filter life of up to 100,000 miles• Simple installation in less than 60 minutes• Custom heat shield to protect the engine bay• Washable, reusable high-flow air filter for lasting performanceHigh-density polyethylene tubing is engineered to streamline airflow, ensuring your engine breathes easier and responds faster under acceleration. The oversized, conical filter not only enhances performance but also reduces maintenance costs by lowering the frequency of filter replacements. With step-by-step instructions, installation is straightforward—making this kit a favorite among Jeep, truck, and 4WD enthusiasts.Easy InstallationEnjoy a user-friendly setup process that usually takes less than 60 minutes, even for beginners in performance modifications. Clear instructions and quality components mean you’ll be back on the road quickly with improved performance.Fitment DetailsThis kit is specifically engineered for: Year Make Model Submodel 2006-2008 Honda Ridgeline RT 2006-2008 Honda Ridgeline RTL 2006-2008 Honda Ridgeline RTS 2007-2008 Honda Ridgeline RTX For additional performance upgrades, explore our Air Intake Systems collection.Please note: Some intakes may not be legal for use on pollution-controlled vehicles in California. Always review product specifications for CARB status and ensure compliance with local regulations.

Enhance your 4.7L V8 engine’s performance with our high-efficiency K&N Jeep Grand Cherokee intake kit. Designed for Jeep Commander and Jeep Grand Cherokee models, this performance intake kit increases horsepower and torque while ensuring reliable, long-lasting operation under any conditions.Key Benefits• Built with a durable HDPE rotationally-molded tube for optimal airflow.• Features a washable, reusable high-flow air filter with oiled cotton media that extends service intervals up to 100,000 miles.• Includes a custom heat shield to protect intake air from engine heat.• Enjoy a straightforward installation that typically takes less than 60 minutes.• Meets CARB requirements—review specifications for vehicle-specific compliance.Installation & Legal InformationInstallation is simple with detailed instructions provided in our installation documents. Please note that some intakes may not be legal for sale or use on pollution-controlled vehicles in California; always confirm the CARB status for your specific vehicle.Compatibility DetailsThis high-performance kit is compatible with several Jeep models, including:• 2006 Jeep Commander 65th Anniversary Edition• 2006–2007 Jeep Commander (Base)• 2006–2009 Jeep Commander (Limited)• 2007–2009 Jeep Commander (Sport)• 2006 Jeep Grand Cherokee 65th Anniversary Edition• 2005–2009 Jeep Grand Cherokee (Laredo and Limited)Explore additional options in our Air Intake Systems collection or browse our All Products for more upgrades.

The K&N 69-8608TFK Typhoon air intake system is a free-flowing, mandrel-bent aluminum tube air induction system designed to fit some Scion TC models. The restrictive factory air filter and air intake housing are replaced by the K&N Typhoon air intake which is designed to dramatically reduce air flow restriction as it smoothes and straightens air flow. This allows your engine to inhale a larger amount of air than the factory air intake. More air means more usable power and acceleration throughout the engine's RPM range. The 69-8608TFK air intake comes with a K&N high-flow air filter and filter cage that installs into the stock upper air cleaner cover. Air is directed through the intake tube into the engine's throttle body for a guaranteed power gain. The intake tube has an attractive black powder-coat finish that's made to last and it accommodates the factory mass air sensor, vacuum switching valve and crank case vent hose. The custom rectangular air filter can be used for up to 100,000 miles before servicing is needed depending on driving conditions. This air intake is relatively easy to install usually in 90 minutes or less using existing factory mounting points. The tools needed are a couple of screwdrivers, needle nose pliers, a ratchet set and some wrenches. Some Typhoon air intakes are not legal for sale or use in California and other states adopting California emission standards while others are CARB exempt and 50 state legal. Check the K&N catalog or website for vehicle applications and specific CARB status for each vehicle and air intake.Installation InstructionsUser 1Installation InstructionsThis Part Fits: Year Make Model Submodel 2005-2006 Scion tC Base

Experience outstanding performance with our cutting-edge K&N performance intake kit, specifically engineered for the Dodge Magnum, Chrysler 300, and V6-2.7L engines. This state-of-the-art system—featuring an HDPE rotationally molded tube and a washable High-Flow Air Filter with oiled cotton media—increases horsepower and torque while delivering exceptional durability and minimal upkeep. Designed for both enthusiasts and professionals, this intake kit meets the highest performance standards.Key Features Enhanced Airflow: The HDPE tube design enhances engine airflow, resulting in noticeable power gains. Extended Service Life: The oversized, conical filter design allows up to 100,000 miles between services under typical highway conditions. Reusable: The washable filter provides an eco-friendly and cost-effective maintenance solution. Custom Heat Shield: Shields the intake air from engine bay heat to preserve optimal performance. Fast Installation: Most installations are completed in under 60 minutes with minimal tools. CARB Compliance: Product specifications include CARB status details for compliant vehicles. Guaranteed Performance: Specifically engineered to deliver a guaranteed increase in horsepower and torque. Installation & FitmentInstallation is simple with clear instructions provided. For detailed, step-by-step guidance, please Download Installation Instructions. This kit is compatible with select models from 2005-2010 for Dodge and Chrysler vehicles, including the Dodge Magnum intake kit and Chrysler 300 performance parts configurations.Browse our complete range of innovative air intake solutions in our Air Intake Systems collection and upgrade your ride today.

Gain a guaranteed increase in horsepower and torque with a K&N cold air intake system featuring a mandrel-bent aluminum intake tube. Each system is paired with a washable, reusable High-Flow Air Filter featuring oiled cotton filter media. The oversized, conical filter design allows you to go up to 100,000 miles between filter services under normal highway driving conditions. A custom heat shield or air box helps protect intake air from the high temperature of your engine bay, and the entire system can typically be installed in less than 90 minutes. Some intakes are not legal for sale or use on any pollution controlled motor vehicle in California. See the product specifications for CARB status on each part for a specific vehicle.Installation InstructionsUser 1This Part Fits: Year Make Model Submodel 2004-2005 Honda Accord DX 2004-2007 Honda Accord EX 2007 Honda Accord EX-L 2004-2007 Honda Accord LX 2006 Honda Accord LX Special Edition 2005 Honda Accord SE 2007 Honda Accord Special Edition 2006-2007 Honda Accord Value Package

Enhance your Jeep Grand Cherokee’s performance with this premium intake kit engineered to boost engine airflow, delivering increased horsepower and torque. Crafted with high-quality materials and innovative design, this system is ideal for vehicle enthusiasts looking to upgrade their intake performance while benefiting from extended service intervals and simplified maintenance.Key Features• HDPE Rotationally-Molded Tube: Maximizes airflow to deliver noticeable improvements in horsepower and torque.• Washable High-Flow Air Filter: Features oiled cotton media for enhanced filtration and durability.• Oversized Conical Design: Provides up to 100,000 miles between filter services under normal highway driving conditions.• Custom Heat Shield: Protects intake air from engine bay heat to maintain peak performance.• Quick Install: Most setups can be completed in 60 minutes or less using common automotive tools.Installation & Legal InformationInstallation is straightforward with clear instructions included, allowing you to experience improved engine efficiency in under an hour. Please note that some parts may not be legal for use on pollution-controlled vehicles in California—verify the CARB status for your specific model.For more performance-focused upgrades, explore our Air Intake Systems collection. If you drive a Jeep Grand Cherokee, be sure to check out our dedicated collection for Jeep Grand Cherokee 2005-2010 Parts.Vehicle Compatibility Year Make Model Submodel 2006 Jeep Commander 65th Anniversary Edition 2006-2007 Jeep Commander Base 2007-2010 Jeep Commander Sport 2006 Jeep Grand Cherokee 65th Anniversary Edition 2005-2010 Jeep Grand Cherokee Laredo 2009-2010 Jeep Grand Cherokee Limited

Gain a guaranteed increase in horsepower and torque with a K&N cold air intake system featuring a mandrel-bent aluminum intake tube. Each system is paired with a washable, reusable High-Flow Air Filter featuring oiled cotton filter media. The oversized, conical filter design allows you to go up to 100,000 miles between filter services under normal highway driving conditions. A custom heat shield or air box helps protect intake air from the high temperature of your engine bay, and the entire system can typically be installed in less than 90 minutes. Some intakes are not legal for sale or use on any pollution controlled motor vehicle in California. See the product specifications for CARB status on each part for a specific vehicle.Installation InstructionsUser 1This Part Fits: Year Make Model Submodel 2006 Jeep Commander 65th Anniversary Edition 2006-2007 Jeep Commander Base 2006-2009 Jeep Commander Limited 2007-2009 Jeep Commander Sport 2006 Jeep Grand Cherokee 65th Anniversary Edition 2005-2009 Jeep Grand Cherokee Laredo 2005-2009 Jeep Grand Cherokee Limited

Experience improved performance with the K&N 05-07 Jeep Grand Cherokee V8-5.7L Performance Intake Kit that increases your engine’s airflow for a guaranteed boost in horsepower and torque. This kit is crafted for Jeep Grand Cherokees and enhances your vehicle’s performance with precision-engineered quality.Key Features Guaranteed increase in horsepower and torque for better engine performance. High-density polyethylene (HDPE) rotationally molded tube ensures superior durability. Washable, reusable High-Flow Air Filter with oiled cotton media supports up to 100,000 miles between services. Custom heat shield protects incoming air from the high temperatures in the engine bay. Quick installation in less than 60 minutes, so you can get back on the road quickly. Technical Details Material: HDPE rotationally molded tube engineered for strength and longevity. Filter Media: Oiled cotton filter delivers high airflow with easy maintenance. Performance: Provides a guaranteed boost in horsepower and torque. Compliance: Verify CARB status for legal use on pollution-controlled vehicles in California. Installation & WarrantyInstallation is simple with detailed instructions provided. Enjoy the peace of mind that comes with a performance kit combining quality, ease of installation, and exceptional durability. Warranty information is available with your purchase.Compatible Models2005-2010 Jeep Grand Cherokee (Laredo, Limited, Overland variants)Explore more performance-enhancing products in our Jeep Grand Cherokee 2005-2010 Parts collection.

Gain a guaranteed increase in horsepower and torque with a K&N cold air intake system featuring a mandrel-bent aluminum intake tube. Each system is paired with a washable, reusable High-Flow Air Filter featuring oiled cotton filter media. The oversized, conical filter design allows you to go up to 100,000 miles between filter services under normal highway driving conditions. A custom heat shield or air box helps protect intake air from the high temperature of your engine bay, and the entire system can typically be installed in less than 90 minutes. Some intakes are not legal for sale or use on any pollution controlled motor vehicle in California. See the product specifications for CARB status on each part for a specific vehicle.Installation InstructionsUser 1This Part Fits: Year Make Model Submodel 2005-2007 Toyota Sequoia Limited 2005-2007 Toyota Sequoia SR5 2005-2006 Toyota Tundra Base 2005-2006 Toyota Tundra Limited 2005-2006 Toyota Tundra SR5

A high-density polyethylene (HDPE) rotationally-molded tube helps increase the volume of airflow to your engine, and provides a guaranteed increase in horsepower and torque. These systems are paired with a washable, reusable High-Flow Air Filter featuring oiled cotton filter media. The oversized, conical design allows you to go up to 100,000 miles between filter services under normal highway driving conditions. A custom heat shield helps protect intake air from the high temperature of your engine bay, and the entire system can typically be installed in less than 60 minutes. Some intakes are not legal for sale or use on any pollution controlled motor vehicle in California. See the product specifications for CARB status on each part for a specific vehicle.Installation InstructionsUser 1This Part Fits: Year Make Model Submodel 2005-2007 Toyota Sequoia Limited 2005-2007 Toyota Sequoia SR5 2005-2006 Toyota Tundra Base 2005-2006 Toyota Tundra Limited 2005-2006 Toyota Tundra SR5

Gain a guaranteed increase in horsepower and torque with a K&N cold air intake system featuring a mandrel-bent aluminum intake tube. Each system is paired with a washable, reusable High-Flow Air Filter featuring oiled cotton filter media. The oversized, conical filter design allows you to go up to 100,000 miles between filter services under normal highway driving conditions. A custom heat shield or air box helps protect intake air from the high temperature of your engine bay, and the entire system can typically be installed in less than 90 minutes. Some intakes are not legal for sale or use on any pollution controlled motor vehicle in California. See the product specifications for CARB status on each part for a specific vehicle.Installation InstructionsUser 1This Part Fits: Year Make Model Submodel 2009-2010 Dodge Dakota Big Horn 2005-2010 Dodge Dakota Laramie 2009-2010 Dodge Dakota Lone Star 2005-2008 Dodge Dakota SLT 2005,2008 Dodge Dakota Sport 2005-2007,2010 Dodge Dakota ST 2008 Dodge Dakota SXT 2008 Dodge Dakota TRX 2008-2010 Dodge Dakota TRX4 2006 Mitsubishi Raider DuroCross 2007 Mitsubishi Raider LS 2007 Mitsubishi Raider SE 2006 Mitsubishi Raider XLS

Gain a guaranteed increase in horsepower and torque with a K&N cold air intake system featuring a mandrel-bent aluminum intake tube. Each system is paired with a washable, reusable High-Flow Air Filter featuring oiled cotton filter media. The oversized, conical filter design allows you to go up to 100,000 miles between filter services under normal highway driving conditions. A custom heat shield or air box helps protect intake air from the high temperature of your engine bay, and the entire system can typically be installed in less than 90 minutes. Some intakes are not legal for sale or use on any pollution controlled motor vehicle in California. See the product specifications for CARB status on each part for a specific vehicle.Installation InstructionsUser 1This Part Fits: Year Make Model Submodel 2007 Subaru Legacy 2.5i Special Edition 2005-2006 Subaru Legacy GT 2005,2007-2009 Subaru Legacy GT Limited 2006-2009 Subaru Legacy GT spec.B 2005 Subaru Legacy i 2005 Subaru Legacy Limited

Experience a noticeable boost in engine performance with this advanced air intake system. Made with high-density polyethylene (HDPE) and featuring a washable, reusable High-Flow Air Filter with premium oiled cotton media, this setup increases airflow by up to 16%—resulting in an estimated gain of 12–23 HP while also enhancing overall torque.Key Benefits• Improved Performance: Enjoy increased airflow that delivers enhanced horsepower and torque for a more dynamic driving experience.• Long-Lasting Durability: The conical filter design offers a service life of up to 100,000 miles under normal highway conditions.• Engine Protection: A custom heat shield protects the intake air from excessive engine bay temperatures.• Easy Installation: Designed for a quick, hassle-free setup, most installations take less than 60 minutes – a great option for those seeking a performance intake installation solution.This system is engineered for select models, including Chrysler 300 trims (such as the 300C performance intake variants), Dodge Challenger, and Charger versions—ideal for enthusiasts looking to purchase a K&N intake for Magnum or upgrade to a K&N Charger performance intake. It’s also recommended for builds that pair best with a K&N Challenger air intake system for your vehicle.Please note: Some intakes may not be legal for sale or use on pollution-controlled vehicles in California. Refer to the product’s CARB status and specifications for your vehicle.Discover more innovative air intake upgrades in our Air Intake Systems and K&N Engineering collections.

Gain a guaranteed increase in horsepower and torque with a K&N cold air intake system featuring a mandrel-bent aluminum intake tube. Each system is paired with a washable, reusable High-Flow Air Filter featuring oiled cotton filter media. The oversized, conical filter design allows you to go up to 100,000 miles between filter services under normal highway driving conditions. A custom heat shield or air box helps protect intake air from the high temperature of your engine bay, and the entire system can typically be installed in less than 90 minutes. Some intakes are not legal for sale or use on any pollution controlled motor vehicle in California. See the product specifications for CARB status on each part for a specific vehicle.Installation InstructionsUser 1This Part Fits: Year Make Model Submodel 2005-2020 Chrysler 300 C 2012-2014 Chrysler 300 C Luxury 2015-2017 Chrysler 300 C Platinum 2005-2010 Chrysler 300 C SRT8 2018 Chrysler 300 Limited 2010,2012-2023 Chrysler 300 S 2018 Chrysler 300 Touring 2009-2023 Dodge Challenger R/T 2012 Dodge Challenger R/T Classic 2015-2016 Dodge Challenger R/T Plus 2016 Dodge Challenger R/T Plus Shaker 2016 Dodge Challenger R/T Shaker 2008-2010 Dodge Challenger SRT8 2017-2018 Dodge Challenger T/A 2017-2018 Dodge Charger Daytona 2006 Dodge Charger Daytona R/T 2006-2023 Dodge Charger Pursuit 2006-2023 Dodge Charger R/T 2015-2016 Dodge Charger R/T Road & Track 2008-2014 Dodge Charger SE 2006-2010 Dodge Charger SRT8 2005-2008 Dodge Magnum R/T 2006-2008 Dodge Magnum SRT8

A high-density polyethylene (HDPE) rotationally-molded tube helps increase the volume of airflow to your engine, and provides a guaranteed increase in horsepower and torque. These systems are paired with a washable, reusable High-Flow Air Filter featuring oiled cotton filter media. The oversized, conical design allows you to go up to 100,000 miles between filter services under normal highway driving conditions. A custom heat shield helps protect intake air from the high temperature of your engine bay, and the entire system can typically be installed in less than 60 minutes. Some intakes are not legal for sale or use on any pollution controlled motor vehicle in California. See the product specifications for CARB status on each part for a specific vehicle.Installation InstructionsUser 1This Part Fits: Year Make Model Submodel 2005-2008 Lexus GX470 Base 2005-2008 Toyota 4Runner Limited 2005-2008 Toyota 4Runner Sport 2005-2008 Toyota 4Runner SR5

Gain a guaranteed increase in horsepower and torque with a K&N cold air intake system featuring a mandrel-bent aluminum intake tube. Each system is paired with a washable, reusable High-Flow Air Filter featuring oiled cotton filter media. The oversized, conical filter design allows you to go up to 100,000 miles between filter services under normal highway driving conditions. A custom heat shield or air box helps protect intake air from the high temperature of your engine bay, and the entire system can typically be installed in less than 90 minutes. Some intakes are not legal for sale or use on any pollution controlled motor vehicle in California. See the product specifications for CARB status on each part for a specific vehicle.Installation InstructionsUser 1This Part Fits: Year Make Model Submodel 2005,2010 Chevrolet Cobalt Base 2005-2010 Chevrolet Cobalt LS 2005-2010 Chevrolet Cobalt LT 2006-2007 Chevrolet Cobalt LTZ

Gain a guaranteed increase in horsepower and torque with a K&N cold air intake system featuring a mandrel-bent aluminum intake tube. Each system is paired with a washable, reusable High-Flow Air Filter featuring oiled cotton filter media. The oversized, conical filter design allows you to go up to 100,000 miles between filter services under normal highway driving conditions. A custom heat shield or air box helps protect intake air from the high temperature of your engine bay, and the entire system can typically be installed in less than 90 minutes. Some intakes are not legal for sale or use on any pollution controlled motor vehicle in California. See the product specifications for CARB status on each part for a specific vehicle.Installation InstructionsUser 1This Part Fits: Year Make Model Submodel 2005-2009 Ford Mustang Base

The K&N 05-09 Ford Mustang V6-4.0L Performance Intake Kit is designed for car enthusiasts looking to boost engine performance. Crafted with precision, this intake kit improves airflow and delivers increased horsepower and torque, perfect for both everyday drivers and performance lovers.Key Features• HDPE rotationally-molded tube optimizes airflow efficiency• Washable, reusable high-flow air filter with oiled cotton media supports up to 100,000 miles between services• Custom heat shield reduces the impact of engine bay temperatures• Fast, user-friendly installation—usually completed in less than 60 minutes• Engineered for reliable, long-term performance with a commitment to qualityInstallation & ComplianceInstallation is simple with detailed instructions available in our resources. Refer to the Installation Instructions and User Manual for complete installation steps. Please note that this performance kit might not be legal for use on pollution-controlled vehicles in California; check the CARB status for your specific vehicle.Fit ForIdeal for 2005-2009 Ford Mustang Base models, this performance intake kit is precisely engineered for your vehicle.Discover more high-performance options in our Air Intake Systems collection.

Gain a guaranteed increase in horsepower and torque with a K&N cold air intake system featuring a mandrel-bent aluminum intake tube. Each system is paired with a washable, reusable High-Flow Air Filter featuring oiled cotton filter media. The oversized, conical filter design allows you to go up to 100,000 miles between filter services under normal highway driving conditions. A custom heat shield or air box helps protect intake air from the high temperature of your engine bay, and the entire system can typically be installed in less than 90 minutes. Some intakes are not legal for sale or use on any pollution controlled motor vehicle in California. See the product specifications for CARB status on each part for a specific vehicle.Installation InstructionsUser 1This Part Fits: Year Make Model Submodel 2013-2019 Nissan Frontier Desert Runner 2005-2010 Nissan Frontier LE 2005-2008 Nissan Frontier Nismo Off-Road 2009-2019 Nissan Frontier PRO-4X 2011-2019 Nissan Frontier S 2005-2010 Nissan Frontier SE 2011-2019 Nissan Frontier SL 2011-2019 Nissan Frontier SV 2005-2012 Nissan Pathfinder LE 2006-2012 Nissan Pathfinder S 2005-2010 Nissan Pathfinder SE 2005-2009 Nissan Pathfinder SE Off-Road 2011-2012 Nissan Pathfinder Silver Edition 2011-2012 Nissan Pathfinder SV 2005 Nissan Pathfinder XE 2005-2010 Nissan Xterra Off-Road 2011-2015 Nissan Xterra PRO-4X 2005-2015 Nissan Xterra S 2005-2010 Nissan Xterra SE 2006-2015 Nissan Xterra X

A high-density polyethylene (HDPE) rotationally-molded tube helps increase the volume of airflow to your engine, and provides a guaranteed increase in horsepower and torque. These systems are paired with a washable, reusable High-Flow Air Filter featuring oiled cotton filter media. The oversized, conical design allows you to go up to 100,000 miles between filter services under normal highway driving conditions. A custom heat shield helps protect intake air from the high temperature of your engine bay, and the entire system can typically be installed in less than 60 minutes. Some intakes are not legal for sale or use on any pollution controlled motor vehicle in California. See the product specifications for CARB status on each part for a specific vehicle.Installation InstructionsUser 1This Part Fits: Year Make Model Submodel 2005-2015 Toyota Tacoma Base 2005-2015 Toyota Tacoma Pre Runner 2016-2023 Toyota Tacoma SR 2016-2023 Toyota Tacoma SR5

Gain a guaranteed increase in horsepower and torque with a K&N cold air intake system featuring a mandrel-bent aluminum intake tube. Each system is paired with a washable, reusable High-Flow Air Filter featuring oiled cotton filter media. The oversized, conical filter design allows you to go up to 100,000 miles between filter services under normal highway driving conditions. A custom heat shield or air box helps protect intake air from the high temperature of your engine bay, and the entire system can typically be installed in less than 90 minutes. Some intakes are not legal for sale or use on any pollution controlled motor vehicle in California. See the product specifications for CARB status on each part for a specific vehicle.Installation InstructionsUser 1This Part Fits: Year Make Model Submodel 2005-2015 Toyota Tacoma Base 2005-2015 Toyota Tacoma Pre Runner 2016-2023 Toyota Tacoma SR 2016-2023 Toyota Tacoma SR5

Gain a guaranteed increase in horsepower and torque with a K&N cold air intake system featuring a mandrel-bent aluminum intake tube. Each system is paired with a washable, reusable High-Flow Air Filter featuring oiled cotton filter media. The oversized, conical filter design allows you to go up to 100,000 miles between filter services under normal highway driving conditions. A custom heat shield or air box helps protect intake air from the high temperature of your engine bay, and the entire system can typically be installed in less than 90 minutes. Some intakes are not legal for sale or use on any pollution controlled motor vehicle in California. See the product specifications for CARB status on each part for a specific vehicle.Installation InstructionsUser 1This Part Fits: Year Make Model Submodel 2006-2010 Jeep Commander Limited 2007-2009 Jeep Commander Overland 2010 Jeep Commander Sport 2010 Jeep Grand Cherokee Laredo 2005-2010 Jeep Grand Cherokee Limited 2006-2009 Jeep Grand Cherokee Overland

Gain a guaranteed increase in horsepower and torque with a K&N cold air intake system featuring a mandrel-bent aluminum intake tube. Each system is paired with a washable, reusable High-Flow Air Filter featuring oiled cotton filter media. The oversized, conical filter design allows you to go up to 100,000 miles between filter services under normal highway driving conditions. A custom heat shield or air box helps protect intake air from the high temperature of your engine bay, and the entire system can typically be installed in less than 90 minutes. Some intakes are not legal for sale or use on any pollution controlled motor vehicle in California. See the product specifications for CARB status on each part for a specific vehicle.Installation InstructionsUser 1This Part Fits: Year Make Model Submodel 2005-2010 Pontiac G6 Base 2005-2010 Pontiac G6 GT

Gain a guaranteed increase in horsepower and torque with a K&N cold air intake system featuring a mandrel-bent aluminum intake tube. Each system is paired with a washable, reusable High-Flow Air Filter featuring oiled cotton filter media. The oversized, conical filter design allows you to go up to 100,000 miles between filter services under normal highway driving conditions. A custom heat shield or air box helps protect intake air from the high temperature of your engine bay, and the entire system can typically be installed in less than 90 minutes. Some intakes are not legal for sale or use on any pollution controlled motor vehicle in California. See the product specifications for CARB status on each part for a specific vehicle.Installation InstructionsUser 1This Part Fits: Year Make Model Submodel 2005-2011 Toyota Tacoma Base 2005-2011 Toyota Tacoma Pre Runner 2005-2011 Toyota Tacoma X-Runner

A high-density polyethylene (HDPE) rotationally-molded tube helps increase the volume of airflow to your engine, and provides a guaranteed increase in horsepower and torque. These systems are paired with a washable, reusable High-Flow Air Filter featuring oiled cotton filter media. The oversized, conical design allows you to go up to 100,000 miles between filter services under normal highway driving conditions. A custom heat shield helps protect intake air from the high temperature of your engine bay, and the entire system can typically be installed in less than 60 minutes. Some intakes are not legal for sale or use on any pollution controlled motor vehicle in California. See the product specifications for CARB status on each part for a specific vehicle.Installation InstructionsUser 1This Part Fits: Year Make Model Submodel 2005-2011 Toyota Tacoma Base 2005-2011 Toyota Tacoma Pre Runner 2005-2011 Toyota Tacoma X-Runner

Experience improved engine performance with a high-flow air intake kit designed to maximize airflow and deliver reliable horsepower and torque gains. This system features advanced components engineered to enhance engine efficiency while reducing maintenance needs.Key Features: High-density polyethylene (HDPE) rotationally molded tube for increased airflow Washable, reusable High-Flow Air Filter with premium, oiled cotton media Custom heat shield to deflect engine bay heat and protect the intake air Extended service intervals—up to 100,000 miles under normal highway conditions Quick, DIY installation typically completed in less than 60 minutes Performance & BenefitsThis air intake system is engineered to boost your engine's performance, delivering improved acceleration and responsiveness. Its robust design and innovative engineering ensure significant horsepower and torque improvements, making it an ideal upgrade for enthusiasts and professionals alike. Please note that some configurations may not be legal for use on pollution-controlled vehicles in California; check CARB compliance in the product specifications for your particular model.This Part Fits Year Make Model Submodel 2005-2014 Toyota Tacoma Base 2005-2014 Toyota Tacoma Pre Runner 2005-2013 Toyota Tacoma X-Runner Explore more performance upgrades in our Air Intake Systems collection.

The K&N DRYFLOW Air Intake System replaces your vehicle’s restrictive factory air filter and air intake housing. K&N intakes are designed to dramatically reduce intake restriction as they smooth and straighten air flow. This allows your vehicle’s engine to inhale a larger amount of air than the factory air filter assembly. More air means more usable power and acceleration throughout the engine’s RPM range. The DRYFLOW Air Intake System features an oil-free synthetic filter media providing increased airflow and exceptional engine protection without requiring oil. This allows cooler, denser air to be directed through a custom intake tube into the engine’s throttle body for a guaranteed power gain. The system can typically be installed in less than 60 minutes. Some intakes are not legal for sale or use on any pollution controlled motor vehicle in California. See the product specifications for CARB status on each part for a specific vehicle.Installation InstructionsUser 1This Part Fits: Year Make Model Submodel 2005-2020 Chrysler 300 C 2012-2014 Chrysler 300 C Luxury 2015-2017 Chrysler 300 C Platinum 2005-2010 Chrysler 300 C SRT8 2010,2017-2023 Chrysler 300 S 2009-2023 Dodge Challenger R/T 2012 Dodge Challenger R/T Classic 2015-2016 Dodge Challenger R/T Plus 2016 Dodge Challenger R/T Plus Shaker 2016 Dodge Challenger R/T Shaker 2008-2010 Dodge Challenger SRT8 2017-2018 Dodge Challenger T/A 2017-2018 Dodge Charger Daytona 2006 Dodge Charger Daytona R/T 2006-2023 Dodge Charger Pursuit 2006-2023 Dodge Charger R/T 2015-2016 Dodge Charger R/T Road & Track 2008-2013 Dodge Charger SE 2006-2010 Dodge Charger SRT8 2005-2008 Dodge Magnum R/T 2006-2008 Dodge Magnum SRT8

Experience the enhanced performance of the K&N 06 Chevrolet HHR performance intake kit, engineered to provide a noticeable boost in horsepower and torque. This Chevrolet HHR L4-2.4L intake kit improves airflow while safeguarding essential engine components, making it an outstanding option if you’re looking to upgrade with a true performance intake kit.Key Features & Benefits Guaranteed Horsepower Increase: The high-density polyethylene (HDPE) tube optimizes airflow to deliver increased horsepower and torque. Engine Heat Protection: The enclosed air box design protects the filter from the heat in the engine bay. Tool-Free Filter Access: The easy-access air box lid allows for quick, hassle-free filter maintenance. High-Flow Washable Filter: Features an oiled cotton media that can last up to 100,000 miles under normal highway conditions. Simple Installation: Typically installs in under 60 minutes, saving you valuable time. Optimized Performance: Designed to meet the rigorous standards of the K&N 06 Chevrolet HHR performance intake kit for dependable, efficient performance. Technical Specifications & Fitment Fitment Details: Year: 2010-2011, Make: Chevrolet, Model: HHR, Submodel: LS Year: 2010-2011, Make: Chevrolet, Model: HHR, Submodel: LS Panel Year: 2006-2011, Make: Chevrolet, Model: HHR, Submodel: LT Year: 2007-2010, Make: Chevrolet, Model: HHR, Submodel: LT Panel For installation details and legal compliance (including CARB status for California), please review the Installation Instructions. Explore additional performance solutions in our Air Intake Systems collection.

Experience an immediate boost in horsepower and torque with this high-performance K&N intake kit, designed for the 2006 Chevy Silverado and GMC Sierra 2500HD/3500 V8-6.6L engines. Engineered for both efficiency and durability, this kit is perfect for truck enthusiasts seeking reliable Chevy Silverado upgrade parts and a true “K&N intake kit for 2006 Chevy” experience. Enjoy enhanced engine breathing and improved overall performance with every drive.Key Features & Benefits• High-density, rotationally molded polyethylene tube increases engine airflow.• Washable, reusable high-flow air filter with oiled cotton media for sustained peak performance.• Custom heat shield protects intake air from the high temperatures in the engine bay.• Quick installation in less than 60 minutes using basic hand tools.Technical & Installation Details• Guaranteed increase in horsepower and torque for a noticeable performance upgrade.• Compatible with select models including the 2006 Chevy Silverado and GMC Sierra 2500HD.• Detailed installation instructions included for a hassle-free fit – please refer to our Air Intake Systems collection for more information.Legal & Fitment InformationCertain intakes may not be legal on pollution-controlled vehicles in California. Always check CARB compliance and review full fitment details for your specific model. This kit is rigorously designed for 2005-2007 models of the Chevy Silverado and GMC Sierra, ensuring an optimal match for your performance needs.

Enhance your Chevy Trailblazer SS performance with the K&N 06 Chevy Trailblazer SS V8-6.0L Performance Intake Kit. Designed to boost airflow, horsepower, and torque, this performance intake kit is engineered for enthusiasts seeking superior engine efficiency and dependable performance for their trucks.Key Features High-density polyethylene (HDPE) tube for improved airflow delivery. Washable, reusable high-flow air filter with oiled cotton media and a distinctive conical design, offering up to 100,000 miles between services. Custom heat shield that protects the intake air from high engine bay temperatures. Straightforward installation process—complete set-up in less than 60 minutes with the provided clear instructions. Designed with legal compliance in mind; note that some versions may not be legal for use on pollution-controlled vehicles in California (see CARB status). Supported by K&N’s reputation for quality and performance, ensuring a reliable upgrade for your engine. Fitment DetailsThis intake kit is specifically designed to fit 2006-2008 Chevy Trailblazer SS models.Installation Resources Installation Instructions User Guide Experience improved throttle response and enhanced performance with this premium intake kit. For more high-performance options, check out our Air Intake Systems.Note: Ensure your vehicle complies with local emissions regulations before installation.

Gain a guaranteed increase in horsepower and torque with a K&N cold air intake system featuring a mandrel-bent aluminum intake tube. Each system is paired with a washable, reusable High-Flow Air Filter featuring oiled cotton filter media. The oversized, conical filter design allows you to go up to 100,000 miles between filter services under normal highway driving conditions. A custom heat shield or air box helps protect intake air from the high temperature of your engine bay, and the entire system can typically be installed in less than 90 minutes. Some intakes are not legal for sale or use on any pollution controlled motor vehicle in California. See the product specifications for CARB status on each part for a specific vehicle.Installation InstructionsUser 1This Part Fits: Year Make Model Submodel 2006-2011 Mitsubishi Eclipse GT 2008 Mitsubishi Eclipse SE 2007-2011 Mitsubishi Eclipse Spyder GT