The K&N 69-0021TB Typhoon cold-air intake system is a free-flowing, mandrel-bent aluminum tube air induction system designed to fit some Acura TL models. The restrictive factory air filter and air intake housing are replaced by the K&N Typhoon cold-air intake which is designed to pull in relatively cooler air and dramatically reduce air flow restriction by smoothing and straightening air flow. This allows your engine to inhale a larger amount of denser air than the factory air intake. More air means more usable power and acceleration throughout the engine's RPM range. Air is directed through the cold air tube and into a short ram intake tube that leads into the engine's throttle body for a guaranteed power gain. The oversized cone shaped air filter comes with a water repellent DryCharger filter wrap to protect the filter from moisture. The air filter can be used for up to 100,000 miles before servicing is needed depending on driving conditions. This air intake is relatively easy to install usually in 90 minutes or less. The tools needed are a screwdriver, ratchet set and pliers. Some Typhoon air intakes are not legal for sale or use in California and other states adopting California emission standards while others are CARB exempt and 50 state legal. Check the K&N catalog or website for vehicle applications and specific CARB status for each vehicle and air intake.Installation InstructionsUser 1This Part Fits: Year Make Model Submodel 2004-2008 Acura TL Base

The K&N 69-0021TS Typhoon cold-air intake system is a free-flowing, mandrel-bent aluminum tube air induction system designed to fit some Acura TL models. The restrictive factory air filter and air intake housing are replaced by the K&N Typhoon cold-air intake which is designed to pull in relatively cooler air and dramatically reduce air flow restriction by smoothing and straightening air flow. This allows your engine to inhale a larger amount of denser air than the factory air intake. More air means more usable power and acceleration throughout the engine's RPM range. The 69-0021TS air intake comes with a black rubber topped K&N high-flow air filter that installs into the front, bottom inner fender to capture cooler outside air. Air is directed through the cold air tube and into a short ram intake tube that leads into the engine's throttle body for a guaranteed power gain. The oversized cone shaped air filter comes with a water repellent DryCharger filter wrap to protect the filter from moisture. The air filter can be used for up to 100,000 miles before servicing is needed depending on driving conditions. This air intake is relatively easy to install usually in 90 minutes or less. Some Typhoon air intakes are not legal for sale or use in California and other states adopting California emission standards while others are CARB exempt and 50 state legal. Check the K&N catalog or website for vehicle applications and specific CARB status for each vehicle and air intake.Installation InstructionsUser 1This Part Fits: Year Make Model Submodel 2004-2008 Acura TL Base

Experience a noticeable boost in engine performance with our advanced air intake system, which is engineered to deliver increased horsepower and torque. Constructed with a high-density polyethylene (HDPE) rotationally molded tube and equipped with a washable, reusable high-flow air filter made from oiled cotton, the system not only optimizes airflow but is also designed for easy maintenance—providing up to 100,000 miles of dependable performance under standard highway conditions. Installation is straightforward and can usually be completed in less than 60 minutes.Key Benefits• Guaranteed increases in horsepower and torque• Improved engine airflow with durable HDPE construction• Washable, reusable high-flow filter media for prolonged performance• Quick and easy installation process• Custom heat shield to protect intake air from engine heat• Regulatory note: May not be compliant with pollution-control regulations in CaliforniaTechnical Specifications• Performance Boost: Noticeable gains in acceleration and engine efficiency• Engine Compatibility:– Years: 2004-2006– Make: Cadillac– Model: CTS (Base)• Filter Life: Up to 100,000 miles under normal highway conditions• Installation Time: Approximately under 60 minutesFor further details on product installation and technical support, please visit our Air Intake Systems collection or consult our online installation guides. Experience the performance upgrade and feel the difference with every drive.

Rev up your engine’s performance with our high-density polyethylene (HDPE) cold air intake system. Designed for drivers seeking a guaranteed horsepower upgrade, this kit is your answer for improved throttle response, fuel efficiency, and overall engine performance. Whether you're looking to Buy K&N Intake Kit Chevy Colorado or a GMC Canyon Performance Intake Kit, our system provides the quality and reliability you need.Key Features• Rotationally-molded HDPE tube to maximize airflow• Washable, reusable high-flow air filter featuring oiled cotton media• Oversized, conical design with an estimated service life of up to 100,000 miles• Custom heat shield to reduce intake air temperature• Quick and simple installation – typically under 60 minutes with standard toolsDetailed Specifications• Guaranteed horsepower and torque gains for enhanced performance• Durable construction built for long-lasting reliability• Compatible with multiple models; check CARB status for legal compliance in California• Comes with a robust warranty that meets industry standards for customer confidenceInstallation & FitmentInstallation is straightforward, and detailed instructions are provided to ensure a smooth setup. Please review the installation guide and user manual for complete guidance. Note that while this system is engineered for high performance, some applications may not be street legal in states with strict emissions regulations.Discover more performance parts in our Air Intake Systems collection and experience the efficiency and durability every truck and Jeep owner demands.

A high-density polyethylene (HDPE) rotationally-molded tube helps increase the volume of airflow to your engine, and provides a guaranteed increase in horsepower and torque. These systems are paired with a washable, reusable High-Flow Air Filter featuring oiled cotton filter media. The oversized, conical design allows you to go up to 100,000 miles between filter services under normal highway driving conditions. A custom heat shield helps protect intake air from the high temperature of your engine bay, and the entire system can typically be installed in less than 60 minutes. Some intakes are not legal for sale or use on any pollution controlled motor vehicle in California. See the product specifications for CARB status on each part for a specific vehicle.Installation InstructionsUser 1This Part Fits: Year Make Model Submodel 2004-2005 Ford Explorer Eddie Bauer 2004-2005 Ford Explorer Limited 2004 Ford Explorer NBX 2004-2005 Ford Explorer XLT 2004-2005 Ford Explorer XLT Sport 2004 Mercury Mountaineer Base 2005 Mercury Mountaineer Convenience 2005 Mercury Mountaineer Luxury 2004-2005 Mercury Mountaineer Premier

Experience a noticeable boost in engine performance with our K&N 04 Ford F-150 V8-4.6L Performance Intake Kit. Crafted with a high-density polyethylene (HDPE) rotationally molded tube, this system is designed to enhance airflow and deliver a guaranteed increase in horsepower and torque, making it an ideal upgrade for your Ford F-150.Key Benefits• Boosts engine performance with increased airflow• Guaranteed horsepower and torque improvements• Washable, reusable High-Flow Air Filter™ featuring oiled cotton media for up to 100,000 miles between services• Custom heat shield protects intake air from high engine bay temperatures• Simple installation in under 60 minutes with minimal tools• Dyno-tested performance benefits and peace of mind with our No-Hassle Lifetime Limited Warranty (where applicable)• Street legal in all US states (verify CARB status through product specifications)The installation process is straightforward and designed for both enthusiasts and professionals. Comprehensive installation instructions are provided, ensuring you can have your intake system ready to perform in less than an hour.Fitment Details Year Make Model Submodel 2004-2005 Ford F-150 STX 2004-2005 Ford F-150 XL 2004-2005 Ford F-150 XLT For more performance upgrades and air intake options, check out our Air Intake Systems collection or explore dedicated parts for your vehicle in the Ford F-150 2004-2008 Parts collection.

This performance kit is engineered exclusively for the Ford F-150 V8-5.4L, delivering a noticeable boost in horsepower and torque. Every component is designed to optimize your engine’s performance while meeting the demands of both the DIY mechanic and performance enthusiast.Key Benefits• A durable HDPE rotationally-molded tube increases airflow for enhanced performance.• A washable, reusable high-flow air filter with oiled cotton media ensures your engine breathes easy.• A custom heat shield protects intake air from engine bay heat.• Installation is straightforward and typically takes less than 60 minutes using hand tools.• Enjoy up to 100,000 miles between filter services under normal highway driving conditions.Installation & Maintenance• Easily install the kit with basic hand tools.• For detailed guidance, please review the Installation Instructions and User Manual.Warranty & LegalThis product comes with our commitment to quality and reliability. Please note that some intakes may not be legal for sale or use on pollution-controlled vehicles in certain regions (such as California). Always check product specifications for CARB status specific to your vehicle.Fitment DetailsThe kit is specifically designed for Ford F-150 models. Year Model Submodel 2007-2008 F-150 FX2 2004-2008 F-150 FX4 2006-2008 F-150 Harley-Davidson Edition 2005-2008 F-150 King Ranch 2004-2008 F-150 Lariat 2008 F-150 Limited 2008 F-150 THE 60TH ANNIVERSARY EDITION 2004-2008 F-150 XL 2004-2008 F-150 XLT Explore our full range of performance-enhancing products in our Air Intake Systems collection to further upgrade your ride.

Experience a noticeable boost in your engine's performance with this premium performance intake kit, specifically engineered for Ford Ranger and Mazda B3000 V6/3.0L engines. Designed to enhance airflow, this upgrade delivers increased horsepower and torque, supporting proven performance improvements for daily driving as well as off-road adventures.Key Benefits• Constructed with a high-density polyethylene (HDPE) rotationally molded tube for optimized airflow and improved engine efficiency• Includes a washable, reusable High-Flow Air Filter with oiled cotton media, allowing service intervals up to 100,000 miles• Custom heat shield design effectively protects intake air from engine bay heat• Quick and simple installation, with most setups completed in under 60 minutes• Performs reliably under intense use, offering benefits such as improved engine sound and enhanced throttle response• Note: Some configurations may not comply with CARB regulations; please review product details to ensure compatibility with California lawsInstallation & FitThis intake system is designed for a straightforward installation process. Detailed instructions are provided in the included installation guides, ensuring even first-time installers can complete the setup quickly and correctly. For full fitment details—including model years, makes, and trims for Ford Ranger and Mazda B3000—please refer to the Product Fit section further down the page.For more performance-enhancing parts, visit our Air Intake Systems collection.

The K&N 04 Ford Ranger / Mazda B4000 V6-4.0L Performance Intake Kit is engineered to enhance your engine’s output, delivering noticeable improvements in horsepower and torque. Experience a smoother throttle response and a more aggressive engine sound, making every drive—whether cruising on the highway or navigating off-road—more thrilling.Key Benefits• Rotationally molded HDPE tube designed to maximize airflow• Washable, reusable high-flow air filter featuring oiled cotton media• Custom heat shield that protects intake air from the heat in the engine bay• Quick installation process that takes less than 60 minutesWhat You Need to KnowConstructed from durable high-density polyethylene, this intake kit is optimized for maximum efficiency. Its oversized conical filter design allows for up to 100,000 miles between services under typical highway driving conditions. It is specifically tailored to fit a variety of Ford Ranger models—including the Edge, FX4, Sport, STX, Tremor, XL, and XLT—as well as Mazda B4000 editions. Please note that some configurations of this intake may not be legal on pollution-controlled vehicles in California; consult CARB guidelines for your specific vehicle.Installation & GuidesFor detailed installation instructions, please refer to our Installation Instructions and User Guide.Visit our Air Intake Systems collection for additional performance upgrade options.

The K&N 69-6010TR Typhoon cold-air intake system is a free-flowing, mandrel-bent aluminum tube air induction system designed to fit some Mazda 3 and Mazda 5 models. The restrictive factory air filter and air intake housing are replaced by the K&N Typhoon cold-air intake which is designed to pull in relatively cooler air and dramatically reduce air flow restriction by smoothing and straightening air flow. This allows your engine to inhale a larger amount of denser air than the factory air intake. More air means more usable power and acceleration throughout the engine's RPM range. The 69-6010TR cold-air intake consists of a black rubber topped K&N high-flow air filter that directs cooler outside air through free-flowing aluminum tubing into a short ram induction tube that delivers high volumes of clean, colder air into the engine's throttle body for a guaranteed power gain. The oversized cone shaped air filter comes with a water repellent DryCharger filter wrap to protect the filter from moisture. The air filter can be used for up to 100,000 miles before servicing is needed depending on driving conditions. This air intake is relatively easy to install usually in 90 minutes or less. Some Typhoon air intakes are not legal for sale or use in California and other states adopting California emission standards while others are CARB exempt and 50 state legal. Check the K&N catalog or website for vehicle applications and specific CARB status for each vehicle and air intake.Installation InstructionsUser 1This Part Fits: Year Make Model Submodel 2005-2009 Mazda 3 i 2007 Mazda 3 Mazdaspeed 2004-2009 Mazda 3 S 2005 Mazda 3 SP23 2007-2008 Mazda 5 Grand Touring 2006-2008 Mazda 5 Sport 2006-2008 Mazda 5 Touring

The K&N 69-6010TS Typhoon cold-air intake system is a free-flowing, mandrel-bent aluminum tube air induction system designed to fit some Mazda 3 and Mazda 5 Van models. The restrictive factory air filter and air intake housing are replaced by the K&N Typhoon cold-air intake which is designed to pull in relatively cooler air and dramatically reduce air flow restriction by smoothing and straightening air flow. This allows your engine to inhale a larger amount of denser air than the factory air intake. More air means more usable power and acceleration throughout the engine's RPM range. The 69-6010TS cold-air intake consists of a K&N high-flow air filter that mounts behind the driver side wheel well directing cooler outside air through free-flowing aluminum tubing into a short ram induction tube that delivers high volumes of clean, colder air into the engine's throttle body for a guaranteed power gain. The oversized cone shaped air filter comes with a water repellent DryCharger filter wrap to protect the filter from moisture. The air filter can be used for up to 100,000 miles before servicing is needed depending on driving conditions. This cold air intake is relatively easy to install usually in 90 minutes or less. Some Typhoon air intakes are not legal for sale or use in California and other states adopting California emission standards while others are CARB exempt and 50 state legal. Check the vehicle applications and specific CARB status for each vehicle and air intake.Installation InstructionsUser 1This Part Fits: Year Make Model Submodel 2005-2009 Mazda 3 i 2007 Mazda 3 Mazdaspeed 2004-2009 Mazda 3 S 2005 Mazda 3 SP23 2007-2008 Mazda 5 Grand Touring 2006-2008 Mazda 5 Sport 2006-2008 Mazda 5 Touring

Enhance your engine's performance with our high-density polyethylene (HDPE) rotationally-molded Performance Intake Kit designed for the Nissan Titan/Pathfinder equipped with a 5.6L V8. Engineered to boost horsepower and torque, this advanced system surpasses factory components by delivering a precise increase in performance and efficiency. With over 35 years of expertise in truck parts, you can rely on the quality and durability of every component.Key Features & Benefits• Guaranteed horsepower and torque increase• Washable, reusable high-flow air filter with oiled cotton media that lasts up to 100,000 miles• Custom heat shield that protects intake air from engine bay heat• Simple installation in less than 60 minutes, saving you time and hassle• Built with high-quality materials for long-lasting durabilityThis Performance Intake Kit is specifically engineered for select Nissan Titan/Pathfinder models. The installation is straightforward and includes detailed instructions. A lifetime limited warranty offers peace of mind; however, it is important to note that some intakes may not be legal in California or areas with strict emission regulations. Refer to the product specifications for CARB status and additional compliance information.For further technical details and model compatibility, please consult our detailed fitment table below. Browse our Air Intake Systems collection for more innovative performance solutions.

Experience improved engine performance with the K&N 04 Pontiac Grand Prix V6-3.8L intake kit. Engineered to enhance horsepower, improve throttle response, and boost overall performance, this system is perfect for enthusiasts who expect both quality and reliability from their performance upgrades.Key Features• Increased horsepower and torque guaranteed• Washable, reusable high-flow air filter with oiled cotton media• High-density polyethylene (HDPE) rotationally molded tube optimized for maximum airflow• Custom heat shield that protects intake air from the engine bay's heat• Straightforward installation—most setups are completed in under 60 minutes• Long-lasting service life, with up to 100,000 miles between filter service intervals• Note: Some intakes may not be legal for sale or use on pollution-controlled vehicles in California. Check CARB specifications for compliance details.Installation & MaintenanceThis premium kit is built for durability and ease of maintenance. The quality components ensure lasting performance, and its design promotes a straightforward, tool-friendly installation. For detailed installation instructions, please refer to the documentation included with the kit. Discover more performance solutions in our Air Intake Systems collection.Fitment Details Year Make Model Submodel 2005 Pontiac Grand Prix Base 2005 Pontiac Grand Prix GT 2004 Pontiac Grand Prix GT1 2004 Pontiac Grand Prix GT2 2004-2005 Pontiac Grand Prix GTP Upgrade your performance today with a system that truly unlocks your engine’s potential.

This high-performance air intake system is engineered to optimize engine performance by boosting airflow, resulting in enhanced horsepower and torque. Its innovative design merges durability with functionality, making it the perfect upgrade for any performance enthusiast.Key Benefits Increases airflow with a high-density polyethylene (HDPE) rotationally-molded tube for measurable performance gains. Features a washable, reusable high-flow air filter with oiled cotton media to ensure sustained efficiency. The oversized conical filter design supports up to 100,000 miles between services under normal highway conditions. Includes a custom heat shield strategically designed to protect the intake air from engine heat. Typically installs in less than 60 minutes, getting you back on the road faster. Note: Some systems are not legal for use on pollution-controlled vehicles in California. Check product specifications for CARB compliance. Technical Specifications Material: HDPE rotationally-molded tube Filter: Oiled cotton, high-flow, washable and reusable Service Life: Up to 100,000 miles under normal highway conditions Performance: Noticeable enhancements in horsepower and torque Compatible Vehicles Year Make Model Submodel 2004 Pontiac GTO Base For additional performance parts, explore our Air Intake Systems collection. For installation guidance, please refer to our Installation Instructions.

Experience remarkable horsepower and torque improvements with the K&N 04-05 Cadillac CTS-V Performance Intake Kit – a precision-engineered intake kit for the Cadillac CTS-V V8 5.7L engine designed to optimize your engine’s performance. This kit not only increases airflow but also delivers a dependable boost while enhancing durability and efficiency.Key Benefits• Guaranteed improvement in horsepower and torque• Simple installation in under 60 minutes• Service intervals of up to 100,000 miles under typical highway conditions• Custom heat shield safeguards intake air from engine bay heat• Washable, reusable high-flow air filter crafted with superior oiled cotton media for extended lifeProduct DetailsConstructed with a premium mandrel-bent aluminum intake tube, this system maximizes airflow while offering superior durability compared to traditional HDPE designs. The oversized, conical high-flow air filter not only improves engine breathing but also extends maintenance intervals, ensuring peak performance at all times. Ideal for automotive enthusiasts seeking a blend of efficiency and reliable power enhancements, this kit is designed for hassle-free installation and long-lasting performance.Specifications• Material: Mandrel-bent aluminum intake tube• Filter Media: Oiled cotton high-flow air filter• Installation: Under 60 minutes• Maintenance: Up to 100,000 miles between filter cleanings• Legal Note: Some intakes are not legal for use on pollution-controlled motor vehicles in California. Please check CARB specifications for your vehicle.Discover more high-performance solutions in our Air Intake Systems collection. Year Make Model Submodel 2004-2005 Cadillac CTS V

Upgrade your vehicle’s performance with this high-performance intake system engineered for Chevy Silverado and GMC Sierra models. Constructed with a high-density polyethylene (HDPE) rotationally molded tube, this system increases airflow to boost horsepower, torque, and throttle response, meeting your high-performance needs. Experience improved engine efficiency thanks to a design that supports extended service intervals and dependable everyday performance.Key Benefits Guaranteed increase in horsepower and torque Enhanced throttle response for spirited driving Washable, reusable high-flow air filter featuring premium oiled cotton media Simple installation in less than 60 minutes Extended filter life for up to 100,000 miles Technical Details HDPE rotationally molded tube for optimized airflow Custom heat shield to protect intake air from engine bay heat Oversized, conical design that aids in maintaining peak performance Compatible with popular K&N intake kits for Chevy Silverado and GMC Sierra Installation is straightforward using basic tools, with clear instructions provided in the installation guides. Note that some intake systems may not be legal for use in pollution-controlled vehicles in California. Always verify the CARB status for your specific configuration before installation.Explore more high-performance options in our Air Intake Systems.Fits: Year Make Model Submodel 2004-2005 Chevrolet Silverado 2500 HD Base 2004-2005 Chevrolet Silverado 2500 HD LS 2004-2005 Chevrolet Silverado 2500 HD LT 2004-2005 Chevrolet Silverado 2500 HD WT 2004-2005 Chevrolet Silverado 3500 Base 2004-2005 Chevrolet Silverado 3500 LS 2004-2005 Chevrolet Silverado 3500 LT 2004 Chevrolet Silverado 3500 WT 2004-2005 GMC Sierra 2500 HD Base 2004-2005 GMC Sierra 2500 HD SLE 2004-2005 GMC Sierra 2500 HD SLT 2004-2005 GMC Sierra 2500 HD WT 2004-2005 GMC Sierra 3500 Base 2004-2005 GMC Sierra 3500 SLE 2004-2005 GMC Sierra 3500 SLT 2004-2005 GMC Sierra 3500 WT

Experience enhanced engine response with the K&N 04-06 Chevy Colorado Performance Intake Kit, designed exclusively for the Chevy Colorado and GMC Canyon L4-2.8L. This high-performance kit increases airflow to deliver improved horsepower and torque, while featuring a sleek, engineered design for optimal efficiency. Whether you're buying a K&N intake kit for your GMC Canyon or upgrading your Chevy Colorado, this solution delivers precision and durability.• HDPE rotationally-molded tube maximizes airflow for enhanced performance.• High-flow, washable, and reusable air filter made with oiled cotton media.• Oversized, conical design extends the filter’s service life up to 100,000 miles.• Custom heat shield protects intake air from high engine bay temperatures.• Simple installation, typically completed in under 60 minutes.• Note: May not be legal for use on CARB-regulated vehicles; verify compliance as necessary.Installation is straightforward—most users complete the setup in under an hour. Please review the provided installation instructions for detailed guidance. This kit may not be compliant with emissions regulations in California and similar regions; check the CARB status and product specifications for your vehicle before installation.Fitment InformationThis Part Fits: Year Make Model Submodel 2004 Chevrolet Colorado Base 2004,2006 Chevrolet Colorado LS 2006 Chevrolet Colorado LT 2004-2005 Chevrolet Colorado Sport 2004-2005 Chevrolet Colorado Sport LS 2006 Chevrolet Colorado WT 2004-2005 Chevrolet Colorado Z71 2004-2005 Chevrolet Colorado Z71 LS 2004-2005 Chevrolet Colorado Z85 2004-2005 Chevrolet Colorado Z85 LS 2004,2006 GMC Canyon SL 2004,2006 GMC Canyon SLE 2006 GMC Canyon WT 2004-2005 GMC Canyon Z71 Fleet 2004-2005 GMC Canyon Z71 SL 2004-2005 GMC Canyon Z71 SLE 2004-2005 GMC Canyon Z85 SL 2004-2005 GMC Canyon Z85 SLE Explore more performance solutions in our Air Intake Systems collection.

Gain a guaranteed increase in horsepower and torque with a K&N cold air intake system featuring a mandrel-bent aluminum intake tube. Each system is paired with a washable, reusable High-Flow Air Filter featuring oiled cotton filter media. The oversized, conical filter design allows you to go up to 100,000 miles between filter services under normal highway driving conditions. A custom heat shield or air box helps protect intake air from the high temperature of your engine bay, and the entire system can typically be installed in less than 90 minutes. Some intakes are not legal for sale or use on any pollution controlled motor vehicle in California. See the product specifications for CARB status on each part for a specific vehicle.Installation InstructionsUser 1This Part Fits: Year Make Model Submodel 2004 Chevrolet Colorado Base 2004 Chevrolet Colorado LS 2006 Chevrolet Colorado LT 2004-2005 Chevrolet Colorado Sport 2004-2005 Chevrolet Colorado Sport LS 2006 Chevrolet Colorado WT 2004-2005 Chevrolet Colorado Z71 2004-2005 Chevrolet Colorado Z71 LS 2004-2005 Chevrolet Colorado Z85 2004-2005 Chevrolet Colorado Z85 LS 2004 GMC Canyon SL 2004,2006 GMC Canyon SLE 2006 GMC Canyon SLT 2006 GMC Canyon WT 2004-2005 GMC Canyon Z71 Fleet 2004-2005 GMC Canyon Z71 SL 2004-2005 GMC Canyon Z71 SLE 2004-2005 GMC Canyon Z85 SL 2004-2005 GMC Canyon Z85 SLE

This performance intake kit is specifically engineered for the Dodge Durango V8 with a 5.7L engine. It’s designed to increase horsepower and torque while maximizing engine airflow. Enjoy an estimated horsepower gain of 8–10 HP and a torque boost of 10–12 lbft with a system built for lasting performance and reliability.Key Benefits• High-density polyethylene (HDPE) tube design that enhances airflow• Washable, reusable High-Flow Air Filter featuring premium oiled cotton media• Extended filter service interval – up to 100,000 miles under normal highway conditions• Quick installation that typically takes under 60 minutes with basic hand tools• Custom heat shield to protect against high engine-bay temperatures• CARB compliance details available – some models may not be legal in CaliforniaSpecifications• Material: HDPE tube with durable construction• Air Filter: Oiled cotton media designed for high flow and longevity• Performance: Estimated Horsepower Gain: 8–10 HP; Estimated Torque Gain: 10–12 lbft• Design: Oversized, conical structure ensuring robust performance and longevity• Support: Backed by Everything Truck Parts’ commitment to reliability and 24/7 customer serviceThis kit is the perfect match for select Dodge and Chrysler models. For detailed compatibility, please refer to the table below: Year Make Model Submodel 2007 Chrysler Aspen Limited 2006–2008 Dodge Durango Adventurer 2004–2009 Dodge Durango Limited 2009 Dodge Durango SE 2004–2009 Dodge Durango SLT 2005 Dodge Durango ST 2007 Dodge Durango SXT Explore more innovative solutions in our Air Intake Systems and Cold Air Intakes collections.

Experience an immediate surge in horsepower and torque with this state-of-the-art performance intake kit designed exclusively for your Nissan Altima (2004–2006) and Maxima (2004–2008). This K&N performance intake kit for the Nissan Altima features a high-density polyethylene (HDPE) rotationally molded tube paired with a washed, reusable high-flow air filter infused with oiled cotton media to enhance airflow and boost engine efficiency.Key Benefits Rotationally Molded Air Intake Tube: Optimizes airflow for superior performance. High-Flow Filter: Utilizes oiled cotton media for excellent filtration and is both washable and reusable. Oversized Conical Design: Allows for extended service intervals up to 100,000 miles. Custom Heat Shield: Shields the intake air from the high temperatures in the engine bay. Performance Gains: Ensures noticeable improvements in horsepower and torque. Easy Installation & MaintenanceComplete the installation in less than an hour with basic hand tools. Its low-maintenance design outperforms traditional OEM parts, so you’ll spend less time in the garage and more time on the road.Vehicle Fitment Nissan Altima (2004–2006) – SE, SE-R, SL Nissan Maxima (2004–2008) – SE, SL Legal & Warranty InformationKeep in mind that some intakes might not be permitted on pollution-controlled vehicles in California. Always check CARB compliance for your specific model. Enjoy peace of mind knowing that this dependable product is supported by exceptional customer service. For additional performance upgrades, visit our Air Intake Systems collection.

Gain a guaranteed increase in horsepower and torque with a K&N cold air intake system featuring a mandrel-bent aluminum intake tube. Each system is paired with a washable, reusable High-Flow Air Filter featuring oiled cotton filter media. The oversized, conical filter design allows you to go up to 100,000 miles between filter services under normal highway driving conditions. A custom heat shield or air box helps protect intake air from the high temperature of your engine bay, and the entire system can typically be installed in less than 90 minutes. Some intakes are not legal for sale or use on any pollution controlled motor vehicle in California. See the product specifications for CARB status on each part for a specific vehicle.Installation InstructionsUser 1This Part Fits: Year Make Model Submodel 2004-2005 Subaru Forester XT 2006 Subaru Forester XT Limited 2005 Subaru Forester XT Premium

Experience a remarkable boost in your Jeep Liberty's performance with the K&N 04-07 Jeep Liberty V6-3.7L Performance Intake Kit. Crafted from a durable high-density polyethylene (HDPE) rotationally molded tube, this system is designed to enhance airflow to your engine and deliver a proven increase in horsepower and torque—all while efficiently replacing your factory air intake for optimum performance.Key Performance Benefits Proven increase in horsepower and torque for a more dynamic driving experience. Enhanced engine airflow thanks to the sturdy HDPE tube design. Washable and reusable High-Flow Air Filter featuring premium oiled cotton media. Extended filter life for up to 100,000 miles under typical highway conditions. Custom heat shield designed to protect intake air from high engine bay temperatures. Improved throttle response and overall driving efficiency. Easy Installation & WarrantyInstalling this performance kit is straightforward—most installations can be completed in under 60 minutes using basic hand tools. Please note that while engineered for peak performance, some models might not be legal for sale or use on emissions-controlled vehicles in California (refer to the CARB status in the product specifications). Enjoy the peace of mind that comes with a No-Hassle Lifetime Limited Warranty.For more innovative air intake solutions, check out our collection on Air Intake Systems.Fitment Information Year Make Model Submodel 2006 Jeep Liberty 65th Anniversary Edition 2004-2007 Jeep Liberty Limited 2004-2006 Jeep Liberty Renegade 2005 Jeep Liberty Rocky Mountain Edition 2004-2007 Jeep Liberty Sport

Gain a guaranteed increase in horsepower and torque with a K&N cold air intake system featuring a mandrel-bent aluminum intake tube. Each system is paired with a washable, reusable High-Flow Air Filter featuring oiled cotton filter media. The oversized, conical filter design allows you to go up to 100,000 miles between filter services under normal highway driving conditions. A custom heat shield or air box helps protect intake air from the high temperature of your engine bay, and the entire system can typically be installed in less than 90 minutes. Some intakes are not legal for sale or use on any pollution controlled motor vehicle in California. See the product specifications for CARB status on each part for a specific vehicle.Installation InstructionsUser 1This Part Fits: Year Make Model Submodel 2004-2010 INFINITI QX56 Base 2005-2009 Nissan Armada LE 2010-2015 Nissan Armada Platinum 2005-2010 Nissan Armada SE 2005-2006 Nissan Armada SE Off-Road 2011-2015 Nissan Armada SL 2011-2015 Nissan Armada SV 2010 Nissan Armada Titanium 2004 Nissan Pathfinder Armada LE 2004 Nissan Pathfinder Armada SE 2004-2010 Nissan TITAN LE 2008-2015 Nissan TITAN PRO-4X 2011-2015 Nissan TITAN S 2004-2010 Nissan TITAN SE 2011-2015 Nissan TITAN SL 2011-2015 Nissan TITAN SV 2004-2010 Nissan TITAN XE

The K&N 69-8605TS Typhoon cold-air intake system is a free-flowing, mandrel-bent aluminum tube air induction system designed to fit some Toyota Scion XB models. The restrictive factory air filter and air intake housing are replaced by the K&N Typhoon cold-air intake which is designed to pull in relatively cooler air and dramatically reduce air flow restriction by smoothing and straightening air flow. This allows your engine to inhale a larger amount of denser air than the factory air intake. More air means more usable power and acceleration throughout the engine's RPM range. The 69-8605TS cold-air intake consists of a black rubber topped K&N high-flow air filter that mounts near the driver side wheel well directing cooler outside air through a free-flowing aluminum intake tube that delivers high volumes of clean, colder air into the engine's throttle body for a guaranteed power gain. The oversized cone shaped air filter comes with a black water repellent DryCharger filter wrap to protect the filter from moisture. The air filter can be used for up to 100,000 miles before servicing is needed depending on driving conditions. This cold air intake is relatively easy to install usually in 90 minutes or less. Some Typhoon air intakes are not legal for sale or use in California and other states adopting California emission standards while others are CARB exempt and 50 state legal. Check the vehicle applications and specific CARB status for each vehicle and air intake.Installation InstructionsUser 1This Part Fits: Year Make Model Submodel 2004-2006 Scion xB Base

Gain a guaranteed increase in horsepower and torque with a K&N cold air intake system featuring a mandrel-bent aluminum intake tube. Each system is paired with a washable, reusable High-Flow Air Filter featuring oiled cotton filter media. The oversized, conical filter design allows you to go up to 100,000 miles between filter services under normal highway driving conditions. A custom heat shield or air box helps protect intake air from the high temperature of your engine bay, and the entire system can typically be installed in less than 90 minutes. Some intakes are not legal for sale or use on any pollution controlled motor vehicle in California. See the product specifications for CARB status on each part for a specific vehicle.Installation InstructionsUser 1This Part Fits: Year Make Model Submodel 2005 Ford Expedition Eddie Bauer 2005 Ford Expedition Limited 2005 Ford Expedition XLS 2005 Ford Expedition XLT 2007-2008 Ford F-150 FX2 2004-2008 Ford F-150 FX4 2006-2008 Ford F-150 Harley-Davidson Edition 2005-2008 Ford F-150 King Ranch 2004-2008 Ford F-150 Lariat 2008 Ford F-150 Limited 2008 Ford F-150 THE 60TH ANNIVERSARY EDITION 2004-2008 Ford F-150 XL 2004-2008 Ford F-150 XLT 2006-2008 Lincoln Mark LT Base

Blackhawk Induction air intake systems feature an oil-free synthetic filter media, black powder-coated aluminum intake tube, and all-black components. The layered DRYFLOW synthetic filter provides increased airflow and exceptional engine protection without requiring oil, and a steel heat shield helps protect intake air from the high temperatures of your engine bay. The system can typically be installed in less than 90 minutes. Some intakes are not legal for sale or use on any pollution controlled motor vehicle in California. See the product specifications for CARB status on each part for a specific vehicle.Installation InstructionsUser 1This Part Fits: Year Make Model Submodel 2005 Ford Expedition Eddie Bauer 2005 Ford Expedition Limited 2005 Ford Expedition XLS 2005 Ford Expedition XLT 2007-2008 Ford F-150 FX2 2004-2008 Ford F-150 FX4 2006-2008 Ford F-150 Harley-Davidson Edition 2005-2008 Ford F-150 King Ranch 2004-2008 Ford F-150 Lariat 2008 Ford F-150 Limited 2008 Ford F-150 THE 60TH ANNIVERSARY EDITION 2004-2008 Ford F-150 XL 2004-2008 Ford F-150 XLT 2006-2008 Lincoln Mark LT Base

Gain a guaranteed increase in horsepower and torque with a K&N cold air intake system featuring a mandrel-bent aluminum intake tube. Each system is paired with a washable, reusable High-Flow Air Filter featuring oiled cotton filter media. The oversized, conical filter design allows you to go up to 100,000 miles between filter services under normal highway driving conditions. A custom heat shield or air box helps protect intake air from the high temperature of your engine bay, and the entire system can typically be installed in less than 90 minutes. Some intakes are not legal for sale or use on any pollution controlled motor vehicle in California. See the product specifications for CARB status on each part for a specific vehicle.Installation InstructionsUser 1This Part Fits: Year Make Model Submodel 2004-2005 Ford Ranger Edge 2005-2009 Ford Ranger FX4 2006-2011 Ford Ranger Sport 2006-2007 Ford Ranger STX 2004 Ford Ranger Tremor 2005-2011 Ford Ranger XL 2004-2011 Ford Ranger XLT 2004-2009 Mazda B4000 Base 2004 Mazda B4000 DS 2004-2008 Mazda B4000 SE

The K&N 69-6030-1TFK Typhoon air intake system is a free-flowing, mandrel-bent aluminum tube air induction system designed to fit some Mazda RX-8 models. The restrictive factory air filter and air intake housing are replaced by the K&N Typhoon air intake which is designed to dramatically reduce air flow restriction as it smoothes and straightens air flow. This allows your engine to inhale a larger amount of air than the factory air intake. More air means more usable power and acceleration throughout the engine's RPM range. The 69-6030-1TFK air intake comes with a K&N high-flow air filter encased within an ultra-lightweight carbon fiber housing and a heat shield that installs into the previous air box space. Air is directed through the intake tube into the engine's throttle body for a guaranteed power gain. The intake tube has an attractive flat black finish that's made to last and it accommodates the factory mass air sensor, air straightener and several vent lines. The oversized encased air filter can be used for up to 100,000 miles before servicing is needed depending on driving conditions. This air intake is relatively easy to install usually in 90 minutes or less. Some Typhoon air intakes are not legal for sale or use in California and other states adopting California emission standards while others are CARB exempt and 50 state legal. Check the K&N catalog or website for vehicle applications and specific CARB status for each vehicle and air intake.Installation InstructionsUser 1This Part Fits: Year Make Model Submodel 2008 Mazda RX-8 40th Anniversary Edition 2004-2007 Mazda RX-8 Base 2008-2011 Mazda RX-8 Grand Touring 2009-2011 Mazda RX-8 R3 2005 Mazda RX-8 Shinka 2008-2011 Mazda RX-8 Sport 2008-2009 Mazda RX-8 Touring

Experience a noticeable boost in performance with the Chevy SSR performance intake kit. Designed to maximize airflow, this K&N intake kit for the Chevy SSR delivers increased horsepower and torque while refining throttle response. Built with quality and durability in mind, it’s ideal for both the experienced enthusiast and the everyday driver.Key Benefits• Proven increase in horsepower and torque• Washable, reusable high-flow air filter lasting up to 100,000 miles• Custom heat shield that delivers cooler intake air for boosted engine performance• Quick and simple installation in under 60 minutes• Note: Some intakes may not be legal for sale or use on vehicles with pollution controls in CaliforniaInstallation & MaintenanceInstallation is straightforward—complete the setup in under 60 minutes and enjoy the advantages of a high-density polyethylene tube that enhances airflow. For detailed instructions, please refer to the Installation Instructions. Routine maintenance will keep your engine performing at its best.Vehicle Fitment• Years: 2005-2006• Make: Chevrolet• Model: SSR• Submodel: BaseFor more performance parts, explore our Air Intake Systems collection. Enjoy the reliability and quality backed by over 35 years of industry expertise, and drive confidently knowing you’re equipped with premium, unmatched performance.

Gain a guaranteed increase in horsepower and torque with a K&N cold air intake system featuring a mandrel-bent aluminum intake tube. Each system is paired with a washable, reusable High-Flow Air Filter featuring oiled cotton filter media. The oversized, conical filter design allows you to go up to 100,000 miles between filter services under normal highway driving conditions. A custom heat shield or air box helps protect intake air from the high temperature of your engine bay, and the entire system can typically be installed in less than 90 minutes. Some intakes are not legal for sale or use on any pollution controlled motor vehicle in California. See the product specifications for CARB status on each part for a specific vehicle.Installation InstructionsUser 1This Part Fits: Year Make Model Submodel 2005-2006 Cadillac Escalade Base 2005-2006 Cadillac Escalade ESV Base 2005-2006 Cadillac Escalade EXT Base 2005 Chevrolet Avalanche 1500 Base 2005-2006 Chevrolet Avalanche 1500 LS 2005-2006 Chevrolet Avalanche 1500 LT 2005-2006 Chevrolet Avalanche 1500 Z66 2005-2006 Chevrolet Avalanche 1500 Z71 2005 Chevrolet Silverado 1500 Base 2005-2006 Chevrolet Silverado 1500 Hybrid 2004-2006 Chevrolet Silverado 1500 LS 2004-2006 Chevrolet Silverado 1500 LT 2005-2006 Chevrolet Silverado 1500 SS 2005-2006 Chevrolet Silverado 1500 WT 2005 Chevrolet Silverado 1500 Z71 Off-Road 2007 Chevrolet Silverado 1500 Classic Hybrid 2007 Chevrolet Silverado 1500 Classic LS 2007 Chevrolet Silverado 1500 Classic LT 2007 Chevrolet Silverado 1500 Classic SS 2007 Chevrolet Silverado 1500 Classic WT 2006 Chevrolet Suburban 1500 Base 2005-2006 Chevrolet Suburban 1500 LS 2005-2006 Chevrolet Suburban 1500 LT 2005-2006 Chevrolet Suburban 1500 Z71 2006 Chevrolet Tahoe Base 2005-2006 Chevrolet Tahoe LS 2005-2006 Chevrolet Tahoe LT 2005-2006 Chevrolet Tahoe Z71 2005 GMC Sierra 1500 Base 2005-2006 GMC Sierra 1500 Denali 2005-2006 GMC Sierra 1500 Hybrid 2006 GMC Sierra 1500 SL 2005-2006 GMC Sierra 1500 SLE 2005-2006 GMC Sierra 1500 SLT 2005-2006 GMC Sierra 1500 WT 2007 GMC Sierra 1500 Classic Denali 2007 GMC Sierra 1500 Classic Hybrid 2007 GMC Sierra 1500 Classic SL 2007 GMC Sierra 1500 Classic SLE 2007 GMC Sierra 1500 Classic SLT 2007 GMC Sierra 1500 Classic WT 2005-2006 GMC Yukon Denali 2006 GMC Yukon SL 2005-2006 GMC Yukon SLE 2005-2006 GMC Yukon SLT 2005-2006 GMC Yukon XL 1500 Denali 2006 GMC Yukon XL 1500 SL 2005-2006 GMC Yukon XL 1500 SLE 2005-2006 GMC Yukon XL 1500 SLT

Upgrade your engine’s performance with this high-performance intake kit engineered to boost airflow, horsepower, and torque. Ideal for Chevy and GMC enthusiasts and those in search of a K&N 05 Chevy GMC Performance Intake Kit or Chevy GMC V8 Intake Kit, this system delivers both quality and efficiency.Key Benefits Guaranteed improvement in horsepower and torque High-density polyethylene intake tube optimized for enhanced airflow Washable, reusable high-flow air filter with up to a 100,000-mile service interval Custom heat shield designed to regulate engine bay temperatures Quick, tool-friendly installation in 60 minutes or less Technical Specifications Engine Compatibility: Designed for 4.6L, 5.3L, and 6.0L engines CARB/Legal Status: Some intakes may not be legal in California; please check the specific CARB status on the product page Installation Tips: Basic hand tools required for a straightforward installation in under 60 minutes Warranty: Supported by quality assurance and a limited manufacturer warranty for confident performance For detailed fitment information—including the complete compatibility list for various Cadillac, Chevrolet, and GMC models—please refer to the dedicated Fitment Guide tab on the product page. Discover more performance upgrades in our Air Intake Systems collection.Built for durability and engineered for precision, this intake kit is a reliable upgrade that meets the demands of the road, offering enhanced performance and peace of mind with every drive.

Revitalize your engine’s performance with our high-performance intake system designed for Dodge Magnum and Chrysler 300 V6-3.5L engines. Benefit from improved airflow, increased horsepower and torque, and up to 100,000 miles of filter life with a system engineered for optimum efficiency.Key Benefits• High-performance HDPE rotationally molded tube for enhanced airflow• Washable, reusable high-flow air filter with oiled cotton media for extended service intervals• Custom heat shield that prevents engine bay heat from affecting the intake air• Fast and easy installation in under 60 minutes• CARB/compliance status details available in the product specificationsWhat’s Included• Precision-engineered intake system components• Custom heat shield• Detailed installation guides (see the Installation Instructions for complete guidance)• Additional usage and performance documentationPlease note: Some intakes may not be legal for sale or use on any pollution-controlled motor vehicle in California. Check the CARB status for your specific vehicle before purchasing.This part is compatible with various Dodge and Chrysler models, including multiple configurations of the Chrysler 300 and Dodge vehicles. For a quick look at other premium air intake options, visit our Air Intake Systems collection.This Part Fits: Year Make Model Submodel 2005-2010 Chrysler 300 Limited 2010 Chrysler 300 S 2009 Chrysler 300 Signature Series 2005-2010 Chrysler 300 Touring 2009-2010 Dodge Challenger SE 2006-2007 Dodge Charger Base 2006-2010 Dodge Charger Pursuit 2006-2010 Dodge Charger SE 2006-2010 Dodge Charger SXT 2007-2008 Dodge Magnum SE 2005-2008 Dodge Magnum SXT 2005 Dodge Magnum SXT Special Edition

Experience a significant boost in your Mustang GT’s performance with an intake kit engineered for improved airflow, horsepower, and torque. Specifically designed for 2005–2006 Ford Mustang GT models, this upgrade features an HDPE rotationally-molded tube to optimize your engine’s breathing, delivering noticeable performance benefits with every drive.Key Features HDPE rotationally-molded intake tube crafted to maximize airflow Washable, reusable High-Flow Air Filter with premium oiled cotton media Custom heat shield that protects intake air from engine bay heat Quick, user-friendly installation typically under 60 minutes Extended filter service interval of up to 100,000 miles This kit is engineered not only to enhance horsepower and torque but also to simplify maintenance, backed by proven reliability and quality performance. Detailed installation instructions are provided, ensuring you can install it with confidence. Please note that, depending on your vehicle’s emissions controls, this product may not be legally used on pollution-controlled vehicles in California—check CARB status and legal guidelines for your specific model.Compatibility2005–2006 Ford Mustang GTEnhance your Mustang’s performance today—install easily and feel the difference. Explore more performance options in our Air Intake Systems collection.

Gain a guaranteed increase in horsepower and torque with a K&N cold air intake system featuring a mandrel-bent aluminum intake tube. Each system is paired with a washable, reusable High-Flow Air Filter featuring oiled cotton filter media. The oversized, conical filter design allows you to go up to 100,000 miles between filter services under normal highway driving conditions. A custom heat shield or air box helps protect intake air from the high temperature of your engine bay, and the entire system can typically be installed in less than 90 minutes. Some intakes are not legal for sale or use on any pollution controlled motor vehicle in California. See the product specifications for CARB status on each part for a specific vehicle.Installation InstructionsUser 1This Part Fits: Year Make Model Submodel 2005-2009 Ford Mustang GT 2007-2008 Ford Mustang Shelby GT

Experience an immediate increase in horsepower and torque with the premium Nissan Pathfinder V6-4.0L air intake kit. Designed to enhance airflow and engine responsiveness, this system improves performance and efficiency while supplying high-quality, dependable components for your ride.Key Features• HDPE rotationally-molded tube engineered to boost airflow and performance• Washable, reusable high-flow air filter featuring oiled cotton media for lasting filtration• Oversized, conical design supports up to 100,000 miles between filter services under normal conditions• Custom heat shield to help keep intake air cool even under intense engine bay conditions• Quick, user-friendly installation—typically completed in under 60 minutesFitment & Technical DetailsSpecifically designed for the Nissan Pathfinder V6-4.0L, this kit is also compatible with select Nissan models. Key specifications include:• Durable construction using high-density polyethylene (HDPE)• Engineered airflow enhancements for measurable power improvements• Easy-to-follow installation guides available here: Installation InstructionsLegal and Regulatory Notes• Some intakes may be illegal for sale or use on pollution-controlled vehicles in California.• Please refer to the product specifications for CARB compliance details specific to your vehicle.Discover more performance upgrades by visiting our Air Intake Systems collection.

Gain a guaranteed increase in horsepower and torque with a K&N cold air intake system featuring a mandrel-bent aluminum intake tube. Each system is paired with a washable, reusable High-Flow Air Filter featuring oiled cotton filter media. The oversized, conical filter design allows you to go up to 100,000 miles between filter services under normal highway driving conditions. A custom heat shield or air box helps protect intake air from the high temperature of your engine bay, and the entire system can typically be installed in less than 90 minutes. Some intakes are not legal for sale or use on any pollution controlled motor vehicle in California. See the product specifications for CARB status on each part for a specific vehicle.Installation InstructionsUser 1This Part Fits: Year Make Model Submodel 2005 Pontiac GTO Base