Photo - Primary
Photo - Primary
User 3
Photo - out of package
Photo - Unmounted
User 1
Photo - out of package
Photo - Unmounted
Photo - out of package
User 4
Photo - Unmounted
Photo - Primary
Photo - Primary
User 3
Photo - out of package
Photo - Unmounted
User 1
Photo - out of package
Photo - Unmounted
Photo - out of package
User 4
Photo - Unmounted
Edelbrock
EDE158120
Edelbrock

Edelbrock Supercharger Stage I R2650 2019 Ford F150 DI/PI 5.0L w/o Tuner

$9,298.95

Description

The new Edelbrock Supercharger System W/O Tuner #158120 is now available for the 2019-2020 Ford F-150 powered by the 5.0L Ti-VCT Coyote V-8 engine. This bolt-on performance kit is 50-state emissions legal and produces 601 horsepower with 468 ft-lbs of torque at the rear wheels on pump gas. At the heart of this supercharger are the new high-efficiency Eaton R2650 Twin Vortices Series rotors featuring a four-lobe design with a 170-degree twist for maximum flow; minimum temperature rise and quiet operation. The R2650 TVS requires 18% less input power and uses larger bearings with thicker gears for increased durability and reliability. The inverted design of our system places the unit low in the F-150 engine valley; which allows runner length to be increased for more low-end torque. Contributing to the 68% power increase is a specially designed front drive with a short front-facing intake configuration that shortens the inlet path and completely eliminates the need for a power-robbing jackshaft found on other types of superchargers. And if you?re concerned about the effect on MPG; the increase in power comes with little to no loss in fuel economy thanks to the supercharger?s integrated bypass valve that mitigates parasitic power loss during normal driving. The Edelbrock supercharger kit for the 2019-20 F-150 features an integrated Dual-Pass 3 Core high-capacity air-to-water intercooler and includes wiring harnesses; pre-formed hoses; hardware and color step-by-step installation manual. (Note that this kit does not include the hand-held programmer.) Whether you plan to tow a trailer; haul heavier loads; or you just want to feel your F-150 come to life without sacrificing daily drivability; the Edelbrock supercharger kit will deliver levels of performance and acceleration that you never thought possible from a stock-block engine. The Edelbrock supercharger comes finished in durable matte black powder-coat and is covered by our industry-leading 3-year/36;000-mile warranty.
Material Safety Data Sheet
Installation Instructions


This Part Fits:

Year Make Model Submodel
2019-2020 Ford F-150 King Ranch
2019-2020 Ford F-150 Lariat
2019-2020 Ford F-150 Limited
2019-2020 Ford F-150 Platinum
2019-2020 Ford F-150 Police Responder
2019-2020 Ford F-150 Raptor
2019-2020 Ford F-150 SSV
2019-2020 Ford F-150 XL
2019-2020 Ford F-150 XLT
The new Edelbrock Supercharger System W/O Tuner #158120 is now available for the 2019-2020 Ford F-150 powered by the 5.0L Ti-VCT Coyote V-8 engine. This bolt-on performance kit is 50-state emissions legal and produces 601 horsepower with 468 ft-lbs of torque at the rear wheels on pump gas. At the heart of this supercharger are the new high-efficiency Eaton R2650 Twin Vortices Series rotors featuring a four-lobe design with a 170-degree twist for maximum flow; minimum temperature rise and quiet operation. The R2650 TVS requires 18% less input power and uses larger bearings with thicker gears for increased durability and reliability. The inverted design of our system places the unit low in the F-150 engine valley; which allows runner length to be increased for more low-end torque. Contributing to the 68% power increase is a specially designed front drive with a short front-facing intake configuration that shortens the inlet path and completely eliminates the need for a power-robbing jackshaft found on other types of superchargers. And if you?re concerned about the effect on MPG; the increase in power comes with little to no loss in fuel economy thanks to the supercharger?s integrated bypass valve that mitigates parasitic power loss during normal driving. The Edelbrock supercharger kit for the 2019-20 F-150 features an integrated Dual-Pass 3 Core high-capacity air-to-water intercooler and includes wiring harnesses; pre-formed hoses; hardware and color step-by-step installation manual. (Note that this kit does not include the hand-held programmer.) Whether you plan to tow a trailer; haul heavier loads; or you just want to feel your F-150 come to life without sacrificing daily drivability; the Edelbrock supercharger kit will deliver levels of performance and acceleration that you never thought possible from a stock-block engine. The Edelbrock supercharger comes finished in durable matte black powder-coat and is covered by our industry-leading 3-year/36;000-mile warranty.
Material Safety Data Sheet
Installation Instructions


This Part Fits:

Year Make Model Submodel
2019-2020 Ford F-150 King Ranch
2019-2020 Ford F-150 Lariat
2019-2020 Ford F-150 Limited
2019-2020 Ford F-150 Platinum
2019-2020 Ford F-150 Police Responder
2019-2020 Ford F-150 Raptor
2019-2020 Ford F-150 SSV
2019-2020 Ford F-150 XL
2019-2020 Ford F-150 XLT

Frequently Asked Questions

Feel Free To Ask Anything!

What payment methods do you accept for online purchases?

We accept all major credit cards, PayPal, Shop Pay, and Apple Pay for your convenience. Once your order ships, you'll receive a tracking number via email.

How long does shipping usually take?

In stock items typically ship in 24-48 hours. Out of stock items can take longer.

Can I return an item if I'm not satisfied?

Yes, we have a 30-day return period. You can view our Return & Refund Policy page for more details - Return & Refund Policy.

Do you offer gift cards?

Yes! They are the perfect gift for those times when you don't know exactly what to get or need something at the last minute. Great for any time of the year as well as those special occasions. Our Gift Cards come in $25, $50, $100, $250 and $500 denominations. And they never expire!

Visit our Gift Card page for more details - Gift Cards.

Can I track my order after it's been placed?

Yes. Once your order has shipped, you will be emailed the tracking information. Additionally, we will email you a delivery confirmation email once your order shows that it has been delivered.

What should I do if I receive a damaged item?

If your shipment is damaged, please reach out to our Customer Support team at 888-292-9012 or email us at info@everythingtruckparts.com. You may also contact us here - Contact Us.