BMRSB002H
BMR Suspension

BMR 82-82 3rd Gen F-Body Front Solid 32mm Sway Bar Kit w/ Bushings - Black Hammertone

Regular price $338.47

Description

The two primary functions of sway bars are to control body roll and to determine the understeer or oversteer behavior of a vehicle. Stock sway bars have low torsional spring rates because they are manufactured from small diameter bar stock or tubing. BMR Suspensions SB002 front sway bar was designed by factoring in the vehicle weight, application, motion ratio, coil spring rate, and adjustability requirements. Manufactured from heavy-duty, solid 32mmbar stock, the SB002 is cold formed to better resist torsional fatigue and retain its "memory" far longer than the hot-formed bars used by many competitors. The sway bar is CNC-formed for exact manufacturing tolerances and repeatable high quality. The sway bar mounts to the car using polyurethane bushings. These bushings are molded from 88-durometer, low-deflection, polyurethane, and are internally fluted to keeps grease in the bushing. The steel sway bar mounting brackets are reinforced to minimize deflection.BMR Suspension designed the SB002 sway bar for street performance, autocross, and road race applications. The large adjustable sway bars three positions give you the versatility to drive to and from the road course or autocross and still out handle the competition with the same sway bar. The SB002 front sway bar gives you a 99% increase in sway bar rate. These rate increases and adjustability allow you to fine-tune the handling characteristics of your F-body so you can drive harder through corners with minimal body roll. The SB002 attaches to your F-body with 88-durometer polyurethane bushings, reducing the deflection from the stock rubber bushings. This allows for more sway bar control, and more control equals better handling. When performance is a must, rely on BMR Suspension!BMR Suspensions SB002 sway bars are available in black hammertone and red powdercoat for long-lasting good looks. Installation time is about 1-2 hours. Proudly made in the U.S.A.!

This Part Fits:

Year Make Model Submodel
1988 Chevrolet Camaro Base
1982-1986 Chevrolet Camaro Berlinetta
1985-1990 Chevrolet Camaro Iroc-Z
1987 Chevrolet Camaro LT
1989-1992 Chevrolet Camaro RS
1992 Chevrolet Camaro RS Heritage Edition
1982-1987 Chevrolet Camaro Sport
1982-1987,1991-1992 Chevrolet Camaro Z28
1992 Chevrolet Camaro Z28 Heritage Edition
1982 Chevrolet Camaro Z28 Indianapolis 500 Pace Car
1982-1992 Pontiac Firebird Base
1989-1992 Pontiac Firebird Formula
1982-1986 Pontiac Firebird S/E
1982-1992 Pontiac Firebird Trans Am
1989-1992 Pontiac Firebird Trans Am GTA
1989 Pontiac Firebird Trans Am GTA SE
The two primary functions of sway bars are to control body roll and to determine the understeer or oversteer behavior of a vehicle. Stock sway bars have low torsional spring rates because they are manufactured from small diameter bar stock or tubing. BMR Suspensions SB002 front sway bar was designed by factoring in the vehicle weight, application, motion ratio, coil spring rate, and adjustability requirements. Manufactured from heavy-duty, solid 32mmbar stock, the SB002 is cold formed to better resist torsional fatigue and retain its "memory" far longer than the hot-formed bars used by many competitors. The sway bar is CNC-formed for exact manufacturing tolerances and repeatable high quality. The sway bar mounts to the car using polyurethane bushings. These bushings are molded from 88-durometer, low-deflection, polyurethane, and are internally fluted to keeps grease in the bushing. The steel sway bar mounting brackets are reinforced to minimize deflection.BMR Suspension designed the SB002 sway bar for street performance, autocross, and road race applications. The large adjustable sway bars three positions give you the versatility to drive to and from the road course or autocross and still out handle the competition with the same sway bar. The SB002 front sway bar gives you a 99% increase in sway bar rate. These rate increases and adjustability allow you to fine-tune the handling characteristics of your F-body so you can drive harder through corners with minimal body roll. The SB002 attaches to your F-body with 88-durometer polyurethane bushings, reducing the deflection from the stock rubber bushings. This allows for more sway bar control, and more control equals better handling. When performance is a must, rely on BMR Suspension!BMR Suspensions SB002 sway bars are available in black hammertone and red powdercoat for long-lasting good looks. Installation time is about 1-2 hours. Proudly made in the U.S.A.!

This Part Fits:

Year Make Model Submodel
1988 Chevrolet Camaro Base
1982-1986 Chevrolet Camaro Berlinetta
1985-1990 Chevrolet Camaro Iroc-Z
1987 Chevrolet Camaro LT
1989-1992 Chevrolet Camaro RS
1992 Chevrolet Camaro RS Heritage Edition
1982-1987 Chevrolet Camaro Sport
1982-1987,1991-1992 Chevrolet Camaro Z28
1992 Chevrolet Camaro Z28 Heritage Edition
1982 Chevrolet Camaro Z28 Indianapolis 500 Pace Car
1982-1992 Pontiac Firebird Base
1989-1992 Pontiac Firebird Formula
1982-1986 Pontiac Firebird S/E
1982-1992 Pontiac Firebird Trans Am
1989-1992 Pontiac Firebird Trans Am GTA
1989 Pontiac Firebird Trans Am GTA SE

Frequently Asked Questions

Feel Free To Ask Anything!

What payment methods do you accept for online purchases?

We accept all major credit cards, PayPal, Shop Pay, and Apple Pay for your convenience. Once your order ships, you'll receive a tracking number via email.

How long does shipping usually take?

In stock items typically ship in 24-48 hours. Out of stock items can take longer.

Can I return an item if I'm not satisfied?

Yes, we have a 30-day return period. You can view our Return & Refund Policy page for more details - Return & Refund Policy.

Do you offer gift cards?

Yes! They are the perfect gift for those times when you don't know exactly what to get or need something at the last minute. Great for any time of the year as well as those special occasions. Our Gift Cards come in $25, $50, $100, $250 and $500 denominations. And they never expire!

Visit our Gift Card page for more details - Gift Cards.

Can I track my order after it's been placed?

Yes. Once your order has shipped, you will be emailed the tracking information. Additionally, we will email you a delivery confirmation email once your order shows that it has been delivered.

What should I do if I receive a damaged item?

If your shipment is damaged, please reach out to our Customer Support team at 888-292-9012 or email us at info@everythingtruckparts.com. You may also contact us here - Contact Us.