BMRSB031R
BMR Suspension

BMR 78-87 G-Body Front & Rear Sway Bar Kit w/ Bushings - Red

Regular price $524.11

Description

The two primary functions of sway bars are to control body roll and to determine the understeer or oversteer behavior of a vehicle. Stock sway bars have low torsional spring rates because they are manufactured from small diameter bar stock or tubing. BMR Suspensions SB031 front and rear sway bar kit was designed by factoring in the vehicle weight, application, motion ratio, coil spring rate, and adjustability requirements. Manufactured from heavy-duty solid 1.25-inch bar stock (front), and 1-inch bar stock (rear), the SB031 is cold formed to better resist torsional fatigue and retain its "memory" far longer than the hot-formed bars used by many competitors. The sway bars are CNC-formed for exact manufacturing tolerances and repeatable high quality. The front sway bar mounts to the car using polyurethane bushings. These bushings are molded from 88-durometer, low-deflection, polyurethane, and are internally fluted to keeps grease in the bushing. The steel sway bar mounting brackets are reinforced to minimize deflection.BMR Suspension designed this sway bar kit for street performance, autocross, and road race applications. The SB031 sway bars give you a massive increase in sway bar rate. These rate increases allow you to drive harder through corners with minimal body roll. The SB031 front sway bar attaches to your G-body with 88-durometer polyurethane bushings, reducing the deflection from the stock rubber bushings. This allows for more sway bar control, and more control equals better handling. When performance is a must, rely on BMR Suspension!BMR Suspensions SB031 sway bars are available in black hammertone and red powdercoat for long-lasting good looks. Installation time is about 3-4 hours. Proudly made in the U.S.A.!
Application Guide


This Part Fits:

Year Make Model Submodel
1978-1987 Buick Regal Base
1982-1983 Buick Regal Estate Wagon
1987 Buick Regal GNX
1984-1987 Buick Regal Grand National
1978-1987 Buick Regal Limited
1982 Buick Regal Limited Turbo
1978-1982 Buick Regal Sport
1983-1986 Buick Regal T-Type
1978-1981 Chevrolet Malibu Base
1978-1983 Chevrolet Malibu Classic
1978-1980 Chevrolet Malibu Classic Estate
1978-1981 Chevrolet Malibu Classic Landau
1979-1980 Chevrolet Malibu Classic Sport
1979-1980 Chevrolet Malibu Estate
1979 Chevrolet Malibu Landau
1979 Chevrolet Malibu Police
1979-1980 Chevrolet Malibu Sport
1979,1981-1987 Chevrolet Monte Carlo Base
1983 Chevrolet Monte Carlo CL
1978-1981 Chevrolet Monte Carlo Landau
1986-1987 Chevrolet Monte Carlo LS
1978,1980 Chevrolet Monte Carlo Sport
1983-1987 Chevrolet Monte Carlo SS
1980 Oldsmobile Cutlass Base
1980-1981 Oldsmobile Cutlass Brougham
1980-1981 Oldsmobile Cutlass LS
1978-1979 Oldsmobile Cutlass Vista Cruiser
1979 Oldsmobile Cutlass Vista Cruiser Brougham
1978-1987 Pontiac Grand Prix Base
1981-1987 Pontiac Grand Prix Brougham
1984-1987 Pontiac Grand Prix LE
1978-1983 Pontiac Grand Prix LJ
1978-1980 Pontiac Grand Prix SJ
The two primary functions of sway bars are to control body roll and to determine the understeer or oversteer behavior of a vehicle. Stock sway bars have low torsional spring rates because they are manufactured from small diameter bar stock or tubing. BMR Suspensions SB031 front and rear sway bar kit was designed by factoring in the vehicle weight, application, motion ratio, coil spring rate, and adjustability requirements. Manufactured from heavy-duty solid 1.25-inch bar stock (front), and 1-inch bar stock (rear), the SB031 is cold formed to better resist torsional fatigue and retain its "memory" far longer than the hot-formed bars used by many competitors. The sway bars are CNC-formed for exact manufacturing tolerances and repeatable high quality. The front sway bar mounts to the car using polyurethane bushings. These bushings are molded from 88-durometer, low-deflection, polyurethane, and are internally fluted to keeps grease in the bushing. The steel sway bar mounting brackets are reinforced to minimize deflection.BMR Suspension designed this sway bar kit for street performance, autocross, and road race applications. The SB031 sway bars give you a massive increase in sway bar rate. These rate increases allow you to drive harder through corners with minimal body roll. The SB031 front sway bar attaches to your G-body with 88-durometer polyurethane bushings, reducing the deflection from the stock rubber bushings. This allows for more sway bar control, and more control equals better handling. When performance is a must, rely on BMR Suspension!BMR Suspensions SB031 sway bars are available in black hammertone and red powdercoat for long-lasting good looks. Installation time is about 3-4 hours. Proudly made in the U.S.A.!
Application Guide


This Part Fits:

Year Make Model Submodel
1978-1987 Buick Regal Base
1982-1983 Buick Regal Estate Wagon
1987 Buick Regal GNX
1984-1987 Buick Regal Grand National
1978-1987 Buick Regal Limited
1982 Buick Regal Limited Turbo
1978-1982 Buick Regal Sport
1983-1986 Buick Regal T-Type
1978-1981 Chevrolet Malibu Base
1978-1983 Chevrolet Malibu Classic
1978-1980 Chevrolet Malibu Classic Estate
1978-1981 Chevrolet Malibu Classic Landau
1979-1980 Chevrolet Malibu Classic Sport
1979-1980 Chevrolet Malibu Estate
1979 Chevrolet Malibu Landau
1979 Chevrolet Malibu Police
1979-1980 Chevrolet Malibu Sport
1979,1981-1987 Chevrolet Monte Carlo Base
1983 Chevrolet Monte Carlo CL
1978-1981 Chevrolet Monte Carlo Landau
1986-1987 Chevrolet Monte Carlo LS
1978,1980 Chevrolet Monte Carlo Sport
1983-1987 Chevrolet Monte Carlo SS
1980 Oldsmobile Cutlass Base
1980-1981 Oldsmobile Cutlass Brougham
1980-1981 Oldsmobile Cutlass LS
1978-1979 Oldsmobile Cutlass Vista Cruiser
1979 Oldsmobile Cutlass Vista Cruiser Brougham
1978-1987 Pontiac Grand Prix Base
1981-1987 Pontiac Grand Prix Brougham
1984-1987 Pontiac Grand Prix LE
1978-1983 Pontiac Grand Prix LJ
1978-1980 Pontiac Grand Prix SJ

Frequently Asked Questions

Feel Free To Ask Anything!

What payment methods do you accept for online purchases?

We accept all major credit cards, PayPal, Shop Pay, and Apple Pay for your convenience. Once your order ships, you'll receive a tracking number via email.

How long does shipping usually take?

In stock items typically ship in 24-48 hours. Out of stock items can take longer.

Can I return an item if I'm not satisfied?

Yes, we have a 30-day return period. You can view our Return & Refund Policy page for more details - Return & Refund Policy.

Do you offer gift cards?

Yes! They are the perfect gift for those times when you don't know exactly what to get or need something at the last minute. Great for any time of the year as well as those special occasions. Our Gift Cards come in $25, $50, $100, $250 and $500 denominations. And they never expire!

Visit our Gift Card page for more details - Gift Cards.

Can I track my order after it's been placed?

Yes. Once your order has shipped, you will be emailed the tracking information. Additionally, we will email you a delivery confirmation email once your order shows that it has been delivered.

What should I do if I receive a damaged item?

If your shipment is damaged, please reach out to our Customer Support team at 888-292-9012 or email us at info@everythingtruckparts.com. You may also contact us here - Contact Us.