BDD1064264SS
BD Diesel

BD Diesel Transmission 2007.5-2018 Dodge 68RFE 4WD w/ Torq Force Converter Package

Regular price $9,997.54

Description

When you purchase a BD Transmission and Torque Converter package, you are getting a matched set that has been dyno tested together for ultimate performance, and reliability. Every transmission comes with BD's own Heavy Duty pan that adds extra fluid capacity and case strength. For towing, street or track, when it comes to a dependable transmission that will stand up to your diesel's power and torque demands, the clear choice is BD.

Installation Instructions
Installation Instructions
Installation Instructions
Installation Instructions
  • BD ProTech68 pressure control module ramps up line pressure to 250 psi using MAP sensor to input load and adjust pressure required
  • BD durable QT100 pressure plates allow for increased clutch counts and reduce deflection and distortion within the clutch drum
  • Custom bonded gasket valve body separator plate increases line pressure while stopping internal cross leaks
  • BD Deep sump oil pan adds extra fluid and cooling capacity while reducing case flex
  • Steel girdle added to 2C piston to allow for more clutches and broader apply area
  • TCC limit valve machined and sleeved to address high wear area with in pump
  • Billet forged front cover with thicker walls and stronger mounting pads
  • Hard anodized valve body and new solenoid pack installed in every unit
  • Furnaced brazed turbine fins for improved fluid coupling efficiency
  • Over Drive clutches 33% increase & 2C clutches 33% increase
  • Heavy duty cam & roller design low reverse one way clutch
  • Ideal replacement for stock torque converter
  • Lower rpm response than the stock converter
  • Great for street and towing applications
  • High performance Enhanced stall stator
  • Upgraded Governor Pressure Transducer
  • Custom Big Stack overdrive shaft
  • Torque Convertor Enhanced Stall
  • BD reinforced accumulator plate
  • New 4C billet spring retainer
  • No Shuttle Shifting Problems
  • Stamped Forged 1 Piece Cover
  • Upgraded Governor Solenoid
  • More Efficient Operation
  • Good for 550 flywheel HP
  • Damper springs replaced
  • 11.625 inch dual-clutch
  • No Race Abuse Covered
  • Upgraded Valve body
  • Furnace Brazed Fins
  • PROFORCE CONVERTER:
  • Aluminum HD Pan
  • TRANSMISSION:

This Part Fits:

Year Make Model Submodel
2007-2010 Dodge Ram 2500 Laramie
2007-2010 Dodge Ram 2500 SLT
2007-2010 Dodge Ram 2500 ST
2008-2010 Dodge Ram 2500 SXT
2010 Dodge Ram 2500 TRX
2007-2010 Dodge Ram 3500 Laramie
2007-2010 Dodge Ram 3500 SLT
2007 Dodge Ram 3500 Sport
2007-2010 Dodge Ram 3500 ST
2008-2009 Dodge Ram 3500 SXT
2013-2018 Ram 2500 Big Horn
2011-2018 Ram 2500 Laramie
2014-2015 Ram 2500 Laramie Limited
2011-2018 Ram 2500 Laramie Longhorn
2016-2018 Ram 2500 Limited
2013-2015 Ram 2500 Lone Star
2012-2016 Ram 2500 Outdoorsman
2011-2018 Ram 2500 SLT
2011-2013 Ram 2500 ST
2013-2018 Ram 2500 Tradesman
2013-2018 Ram 3500 Big Horn
2011-2018 Ram 3500 Laramie
2014-2015 Ram 3500 Laramie Limited
2011-2018 Ram 3500 Laramie Longhorn
2016-2018 Ram 3500 Limited
2013-2015,2017 Ram 3500 Lone Star
2011-2018 Ram 3500 SLT
2011-2013 Ram 3500 ST
2013-2018 Ram 3500 Tradesman

When you purchase a BD Transmission and Torque Converter package, you are getting a matched set that has been dyno tested together for ultimate performance, and reliability. Every transmission comes with BD's own Heavy Duty pan that adds extra fluid capacity and case strength. For towing, street or track, when it comes to a dependable transmission that will stand up to your diesel's power and torque demands, the clear choice is BD.

Installation Instructions
Installation Instructions
Installation Instructions
Installation Instructions
  • BD ProTech68 pressure control module ramps up line pressure to 250 psi using MAP sensor to input load and adjust pressure required
  • BD durable QT100 pressure plates allow for increased clutch counts and reduce deflection and distortion within the clutch drum
  • Custom bonded gasket valve body separator plate increases line pressure while stopping internal cross leaks
  • BD Deep sump oil pan adds extra fluid and cooling capacity while reducing case flex
  • Steel girdle added to 2C piston to allow for more clutches and broader apply area
  • TCC limit valve machined and sleeved to address high wear area with in pump
  • Billet forged front cover with thicker walls and stronger mounting pads
  • Hard anodized valve body and new solenoid pack installed in every unit
  • Furnaced brazed turbine fins for improved fluid coupling efficiency
  • Over Drive clutches 33% increase & 2C clutches 33% increase
  • Heavy duty cam & roller design low reverse one way clutch
  • Ideal replacement for stock torque converter
  • Lower rpm response than the stock converter
  • Great for street and towing applications
  • High performance Enhanced stall stator
  • Upgraded Governor Pressure Transducer
  • Custom Big Stack overdrive shaft
  • Torque Convertor Enhanced Stall
  • BD reinforced accumulator plate
  • New 4C billet spring retainer
  • No Shuttle Shifting Problems
  • Stamped Forged 1 Piece Cover
  • Upgraded Governor Solenoid
  • More Efficient Operation
  • Good for 550 flywheel HP
  • Damper springs replaced
  • 11.625 inch dual-clutch
  • No Race Abuse Covered
  • Upgraded Valve body
  • Furnace Brazed Fins
  • PROFORCE CONVERTER:
  • Aluminum HD Pan
  • TRANSMISSION:

This Part Fits:

Year Make Model Submodel
2007-2010 Dodge Ram 2500 Laramie
2007-2010 Dodge Ram 2500 SLT
2007-2010 Dodge Ram 2500 ST
2008-2010 Dodge Ram 2500 SXT
2010 Dodge Ram 2500 TRX
2007-2010 Dodge Ram 3500 Laramie
2007-2010 Dodge Ram 3500 SLT
2007 Dodge Ram 3500 Sport
2007-2010 Dodge Ram 3500 ST
2008-2009 Dodge Ram 3500 SXT
2013-2018 Ram 2500 Big Horn
2011-2018 Ram 2500 Laramie
2014-2015 Ram 2500 Laramie Limited
2011-2018 Ram 2500 Laramie Longhorn
2016-2018 Ram 2500 Limited
2013-2015 Ram 2500 Lone Star
2012-2016 Ram 2500 Outdoorsman
2011-2018 Ram 2500 SLT
2011-2013 Ram 2500 ST
2013-2018 Ram 2500 Tradesman
2013-2018 Ram 3500 Big Horn
2011-2018 Ram 3500 Laramie
2014-2015 Ram 3500 Laramie Limited
2011-2018 Ram 3500 Laramie Longhorn
2016-2018 Ram 3500 Limited
2013-2015,2017 Ram 3500 Lone Star
2011-2018 Ram 3500 SLT
2011-2013 Ram 3500 ST
2013-2018 Ram 3500 Tradesman

Frequently Asked Questions

Feel Free To Ask Anything!

What payment methods do you accept for online purchases?

We accept all major credit cards, PayPal, Shop Pay, and Apple Pay for your convenience. Once your order ships, you'll receive a tracking number via email.

How long does shipping usually take?

In stock items typically ship in 24-48 hours. Out of stock items can take longer.

Can I return an item if I'm not satisfied?

Yes, we have a 30-day return period. You can view our Return & Refund Policy page for more details - Return & Refund Policy.

Do you offer gift cards?

Yes! They are the perfect gift for those times when you don't know exactly what to get or need something at the last minute. Great for any time of the year as well as those special occasions. Our Gift Cards come in $25, $50, $100, $250 and $500 denominations. And they never expire!

Visit our Gift Card page for more details - Gift Cards.

Can I track my order after it's been placed?

Yes. Once your order has shipped, you will be emailed the tracking information. Additionally, we will email you a delivery confirmation email once your order shows that it has been delivered.

What should I do if I receive a damaged item?

If your shipment is damaged, please reach out to our Customer Support team at 888-292-9012 or email us at info@everythingtruckparts.com. You may also contact us here - Contact Us.