AEM
AEM30-0352
AEM

AEM X-Series Tru-Boost Controller Gauge w/ Boost Control Solenoid 80PSIg Internal MAP Sensor

$421.15
$449.95 Sale $421.15

Description

All AEM Tru-Boost gauge programming is done using the faceplate buttons and no laptop is required. AEM's specially designed Boost Control Solenoid and all necessary hardware is included.Program Two Boost Levels + Scramble Boost Setting - Program two boost modes for different levels of performance (up to 80PSIg internal MAP sensor), and program a time-based scramble boost setting that is controlled using a switched input. You can also turn off the controller and use the gauge as a display.Change Wastegate Open Pressure-Ideal for reducing boost spikes and improving spool up.Display Boost Levels in PSIg (PSI), BAR or kPa (PAS) -See your boost in the units you prefer, and scale the 24 outer LEDs to match your peak boost levels for the perfect sweeping motion.Set Alarms and Display Peak Boost-Set the 24 green outer LEDs to flash based on boost pressure so you are alerted to an overboost condition. A ground output is included for triggering an optional LED warning light. Select the "B" button to see peak boost level and clear the value using the menu.Overboost Protection Built In-Protects your engine from an overboost condition by shutting the boost control solenoid off until it is reactivated by you through the buttons on the faceplate.Integrated Error Protection-Alerts you to a fault if the boost control solenoid is shorted or disconnected so you are never left guessing whether the Tru-BoostX is operational.Datalog using AEMnet CAN bus-Outputting channels over AEMnet provides so much more than just boost pressure! Send 13 channels of data over a 2-wire connection, including boost pressure, peak boost, boost target, boost scramble duty, overboost status, wastegate crack pressure, boost control solenoid status and more.

Installation Instructions
  • Overboost protection and programmable alarms, ground output for optional LED warning light
  • Slim 0.825" overall gauge depth and 0.200" cup depth - mount them virtually anywhere!
  • Wastegate open pressure setting for controlling boost spikes and faster spool
  • On-board 80PSIg MAP sensor-no upgrade kit needed for high boost vehicles
  • AEMnet CANbus-enabled for transmitting data to EMS or Data Logger
  • Programmable center LED is 87% larger than original AEM gauges
  • 2-1/16th (52mm) gauge diameter for easy mounting in gauge pods
  • 24 green outer LEDs for quick reference to engine parameter
  • Two boost level settings and scramble boost setting
  • A boost display gauge and boost controller in one!
  • Display boost levels in PSI, BAR or kPa
  • Easy to program - no laptop required

All AEM Tru-Boost gauge programming is done using the faceplate buttons and no laptop is required. AEM's specially designed Boost Control Solenoid and all necessary hardware is included.Program Two Boost Levels + Scramble Boost Setting - Program two boost modes for different levels of performance (up to 80PSIg internal MAP sensor), and program a time-based scramble boost setting that is controlled using a switched input. You can also turn off the controller and use the gauge as a display.Change Wastegate Open Pressure-Ideal for reducing boost spikes and improving spool up.Display Boost Levels in PSIg (PSI), BAR or kPa (PAS) -See your boost in the units you prefer, and scale the 24 outer LEDs to match your peak boost levels for the perfect sweeping motion.Set Alarms and Display Peak Boost-Set the 24 green outer LEDs to flash based on boost pressure so you are alerted to an overboost condition. A ground output is included for triggering an optional LED warning light. Select the "B" button to see peak boost level and clear the value using the menu.Overboost Protection Built In-Protects your engine from an overboost condition by shutting the boost control solenoid off until it is reactivated by you through the buttons on the faceplate.Integrated Error Protection-Alerts you to a fault if the boost control solenoid is shorted or disconnected so you are never left guessing whether the Tru-BoostX is operational.Datalog using AEMnet CAN bus-Outputting channels over AEMnet provides so much more than just boost pressure! Send 13 channels of data over a 2-wire connection, including boost pressure, peak boost, boost target, boost scramble duty, overboost status, wastegate crack pressure, boost control solenoid status and more.

Installation Instructions
  • Overboost protection and programmable alarms, ground output for optional LED warning light
  • Slim 0.825" overall gauge depth and 0.200" cup depth - mount them virtually anywhere!
  • Wastegate open pressure setting for controlling boost spikes and faster spool
  • On-board 80PSIg MAP sensor-no upgrade kit needed for high boost vehicles
  • AEMnet CANbus-enabled for transmitting data to EMS or Data Logger
  • Programmable center LED is 87% larger than original AEM gauges
  • 2-1/16th (52mm) gauge diameter for easy mounting in gauge pods
  • 24 green outer LEDs for quick reference to engine parameter
  • Two boost level settings and scramble boost setting
  • A boost display gauge and boost controller in one!
  • Display boost levels in PSI, BAR or kPa
  • Easy to program - no laptop required

Frequently Asked Questions

Feel Free To Ask Anything!

What payment methods do you accept for online purchases?

We accept all major credit cards, PayPal, Shop Pay, and Apple Pay for your convenience. Once your order ships, you'll receive a tracking number via email.

How long does shipping usually take?

In stock items typically ship in 24-48 hours. Out of stock items can take longer.

Can I return an item if I'm not satisfied?

Yes, we have a 30-day return period. You can view our Return & Refund Policy page for more details - Return & Refund Policy.

Do you offer gift cards?

Yes! They are the perfect gift for those times when you don't know exactly what to get or need something at the last minute. Great for any time of the year as well as those special occasions. Our Gift Cards come in $25, $50, $100, $250 and $500 denominations. And they never expire!

Visit our Gift Card page for more details - Gift Cards.

Can I track my order after it's been placed?

Yes. Once your order has shipped, you will be emailed the tracking information. Additionally, we will email you a delivery confirmation email once your order shows that it has been delivered.

What should I do if I receive a damaged item?

If your shipment is damaged, please reach out to our Customer Support team at 888-292-9012 or email us at info@everythingtruckparts.com. You may also contact us here - Contact Us.