The 4-link bracket kit is an essential component of the ICON 2005-2010 Ford Super Duty 4-Link Conversion System. This 4-Link system not only gives your Ford Super Duty an aggressive look, it enhances the articulation of the front suspension by eliminating bushing bind and improves handling of the truck by maintaining consistent caster angles through the entirety of the front suspension travel range. The large, deflective radius arm bushings are replaced with competition grade, PTFE lined spherical bearings in each link. This harder surface minimizes deflection to further increase the overall handling characteristics for maximum predictability and suspension responsiveness. Additionally, the ICON double adjusters in the lower links allows tuning of caster angle while the links are installed on the vehicle, easing the front-end alignment process.Installation InstructionsThis Part Fits: Year Make Model Submodel 2009-2010 Ford F-250 Super Duty Cabela's 2008-2009 Ford F-250 Super Duty FX4 2005-2010 Ford F-250 Super Duty Harley-Davidson Edition 2005-2010 Ford F-250 Super Duty King Ranch 2005-2010 Ford F-250 Super Duty Lariat 2005-2010 Ford F-250 Super Duty XL 2005-2010 Ford F-250 Super Duty XLT 2009-2010 Ford F-350 Super Duty Cabela's 2008-2009 Ford F-350 Super Duty FX4 2005-2010 Ford F-350 Super Duty Harley-Davidson Edition 2005-2010 Ford F-350 Super Duty King Ranch 2005-2010 Ford F-350 Super Duty Lariat 2005-2010 Ford F-350 Super Duty XL 2005-2010 Ford F-350 Super Duty XLT

ICON Vehicle Dynamics’ Toyota Hilux suspension systems have been designed with maximum performance and the serious driver in mind. The varying uses of this vehicle worldwide were acknowledged and catered to in ICON’s research and development process. The Hilux Stage 1 system provides a baseline level of performance that will drastically improve on and off-road vehicle ride characteristics. ICON's Vehicle-specific tuned 2.5” coilover shocks feature a internal reservoir for exceptional cooling properties, and ICON-engineered Eibach coil springs for superior vehicle “feel” throughout the range of travel. These 2.5" coilovers are height adjustable from 0-3” allowing you to level the Hilux front to back, and install a larger tire when desired. ICON 2.0 Aluminum Series monotube rear shocks balance performance of the truck front to rear for a great all-around feel on any terrain. ICON has taken into account the stiffer chassis of the Hilux, realizing a much more robust overall shock tune was required for sufficient damping ability across varying terrains and differing vehicle payloads. This attention to detail is why ICON Vehicle Dynamics performance suspension systems are the ultimate solution for the Toyota Hilux.Installation InstructionsInstallation Instructions

ICON Vehicle Dynamics’ Toyota Hilux suspension systems have been designed with maximum performance and the serious driver in mind. The varying uses of this vehicle worldwide were acknowledged and catered to in ICON’s research and development process. The Hilux Stage 2 system provides a level of performance that will drastically improve on and off-road vehicle ride characteristics. ICON's Vehicle-specific tuned 2.5” coilover shocks feature an internal reservoir for exceptional cooling properties, and ICON-engineered Eibach coil springs for superior vehicle “feel” throughout the range of travel. These 2.5" coilovers are height adjustable from 0-3” allowing the use of larger, more aggressive wheel and tire combinations when desired. ICON 2.0 Aluminum Series monotube rear shocks balance performance of the truck front to rear for a great all-around feel on any terrain. ICON has taken into account the stiffer chassis of the Hilux, realizing a much more robust overall shock tune was required for sufficient damping ability across varying terrains and differing vehicle payloads. By utilizing a shackle to lift the rear of the Hilux when the front is set to 3", factory payload rating is retained while allowing more suspension up-travel. This attention to detail is why ICON Vehicle Dynamics performance suspension systems are the ultimate solution for the Toyota Hilux.Installation InstructionsInstallation InstructionsInstallation Instructions

ICON Vehicle Dynamics’ Toyota Hilux suspension systems have been designed with maximum performance and the serious driver in mind. The varying uses of this vehicle worldwide were acknowledged and catered to in ICON’s research and development process. The Hilux Stage 3 system provides a level of performance that will drastically improve on and off-road vehicle ride characteristics. ICON's Vehicle-specific tuned 2.5” coilover shocks feature an internal reservoir for exceptional cooling properties, and ICON-engineered Eibach coil springs for superior vehicle “feel” throughout the range of travel. These 2.5" coilovers are height adjustable from 0-3” allowing the use of larger, more aggressive wheel and tire combinations when desired. ICON 2.0 Aluminum Series remote reservoir rear shocks balance performance of the truck front to rear, and ensure optimum performance by increasing the duration of consistent damping by keeping the shocks at a cooler operating temperature during extended off-road use. ICON has taken into account the stiffer chassis of the Hilux, realizing a much more robust overall shock tune was required for sufficient damping ability across varying terrains and differing vehicle payloads. By utilizing a shackle to lift the rear of the Hilux when the front is set to 3", factory payload rating is retained while allowing more suspension up-travel. Tubular uniball upper control arms on the Hilux not only add strength and durability, but help retain factory alignment spec range increasing caster over stock. This attention to detail is why ICON Vehicle Dynamics performance suspension systems are the ultimate solution for the Toyota Hilux.Installation InstructionsInstallation InstructionsInstallation InstructionsInstallation Instructions

ICON Vehicle Dynamics’ Toyota Hilux suspension systems have been designed with maximum performance and the serious driver in mind. The varying uses of this vehicle worldwide were acknowledged and catered to in ICON’s research and development process. The Hilux Stage 4 system provides a level of performance that will drastically improve on and off-road vehicle ride characteristics. ICON's Vehicle-specific tuned 2.5” remote reservoir coilover shocks and ICON 2.0 Aluminum Series in this system provide exceptional cooling properties, with the coilovers utilizing ICON-engineered Eibach coil springs for superior vehicle “feel” throughout the range of travel. Remote reservoirs front and rear ensure optimum performance by increasing the duration of consistent damping, keeping the shocks at a cooler operating temperature during extended off-road use. These 2.5" remote reservoir coilovers are also height adjustable from 0-3” allowing the use of larger, more aggressive wheel and tire combinations when desired. ICON has taken into account the stiffer chassis of the Hilux, realizing a much more robust overall shock tune was required for sufficient damping ability across varying terrains and differing vehicle payloads. By using a shackle to lift the rear of the Hilux when the front is set to 3", factory payload rating is retained while allowing more suspension up-travel. Tubular uniball upper control arms on the Hilux not only add strength and durability, but help retain factory alignment spec range increasing caster over stock. This attention to detail is why ICON Vehicle Dynamics performance suspension systems are the ultimate solution for the Toyota Hilux.Installation InstructionsInstallation InstructionsInstallation InstructionsInstallation Instructions

ICON Vehicle Dynamics’ Toyota Hilux suspension systems have been designed with maximum performance and the serious driver in mind. The varying uses of this vehicle worldwide were acknowledged and catered to in ICON’s research and development process. The Hilux Stage 5 system provides a level of performance that will drastically improve on and off-road vehicle ride characteristics. ICON's Vehicle-specific tuned 2.5” remote reservoir w/ CDCV coilover shocks and ICON 2.0 Aluminum Series in this system provide exceptional cooling properties, with the coilovers utilizing ICON-engineered Eibach coil springs for superior vehicle “feel” throughout the range of travel. Remote reservoirs front and rear ensure optimum performance by increasing the duration of consistent damping, keeping the shocks at a cooler operating temperature during extended off-road use. These 2.5" remote reservoir w/ CDCV coilovers are also height adjustable from 0-3” allowing the use of larger, more aggressive wheel and tire combinations when desired. ICON has taken into account the stiffer chassis of the Hilux, realizing a much more robust overall shock tune was required for sufficient damping ability across varying terrains and differing vehicle payloads. By using a shackle to lift the rear of the Hilux when the front is set to 3", factory payload rating is retained while allowing more suspension up-travel. Billet uniball upper control arms on the Hilux not only add strength and durability, but help retain factory alignment spec range allowing on vehicle adjustability. This attention to detail is why ICON Vehicle Dynamics performance suspension systems are the ultimate solution for the Toyota Hilux.Installation InstructionsInstallation InstructionsInstallation InstructionsInstallation Instructions

ICON 05-15 Toyota Hilux 1in Rear Shackle KitInstallation Instructions

ICON Vehicle Dynamics Toyota Tacoma suspension systems are designed with maximum performance and the serious driver in mind. ICON engineers’ primary focus is to increase wheel travel and damping ability, which translates into outstanding vehicle control and ride quality both on and off-road. The Stage 1 system includes vehicle-specific tuned 2.5” coilover shocks featuring an internal reservoir for exceptional cooling properties and ICON-engineered Eibach coil springs for superior vehicle “feel” through the range of travel. These coilovers are height adjustable from 0-3.5” of lift on 2005-2015 or 0-2.75” on 2016-UP models allowing the use of larger, more aggressive wheel and tire combinations. ICON 2.0 Aluminum Series monotube rear shocks utilize a vehicle-specific valving that balances the performance of the truck from front to rear. The ICON Vehicle Dynamics 2005-UP Toyota Tacoma 4WD/PreRunner Stage 1 suspension system is an excellent choice for those drivers looking to enhance the capabilities of their pickup on the road as well as in the dirt.Installation InstructionsInstallation InstructionsThis Part Fits: Year Make Model Submodel 2005-2015 Toyota Tacoma Base 2016-2021 Toyota Tacoma Limited 2005-2015 Toyota Tacoma Pre Runner 2016-2021 Toyota Tacoma SR 2016-2021 Toyota Tacoma SR5 2021 Toyota Tacoma Trail 2016-2021 Toyota Tacoma TRD Off-Road 2015,2017-2021 Toyota Tacoma TRD Pro 2016-2021 Toyota Tacoma TRD Sport 2005-2013 Toyota Tacoma X-Runner

ICON Vehicle Dynamics Toyota Tacoma suspension systems are designed with maximum performance and the serious driver in mind. ICON engineers’ primary focus is to increase wheel travel and damping ability, which translates into outstanding vehicle control and ride quality both on and off-road. The Stage 2 system includes vehicle-specific tuned 2.5” coilover shocks featuring an internal reservoir for exceptional cooling properties and ICON-engineered Eibach coil springs for superior vehicle “feel” through the range of travel. These coilovers are also height adjustable from 0-3.5” of lift on 2005-2015 or 0-2.75” on 2016-UP models allowing the use of larger, more aggressive wheel and tire combinations. Remote reservoir ICON 2.0 Aluminum Series rear shocks utilize a vehicle-specific valving that balances the performance of the truck from front to rear. The ICON Vehicle Dynamics 2005-UP Toyota Tacoma 4WD/PreRunner Stage 2 suspension system is an excellent choice for those drivers looking to enhance the capabilities of their pickup on the road as well as in the dirt.Installation InstructionsInstallation InstructionsInstallation InstructionsInstallation InstructionsThis Part Fits: Year Make Model Submodel 2005-2015 Toyota Tacoma Base 2016-2021 Toyota Tacoma Limited 2005-2015 Toyota Tacoma Pre Runner 2016-2021 Toyota Tacoma SR 2016-2021 Toyota Tacoma SR5 2021 Toyota Tacoma Trail 2016-2021 Toyota Tacoma TRD Off-Road 2015,2017-2021 Toyota Tacoma TRD Pro 2016-2021 Toyota Tacoma TRD Sport 2005-2013 Toyota Tacoma X-Runner

The Stage 8 system includes vehicle-specific tuned 2.5 Series Extended Travel coilover shocks featuring a remote reservoir for exceptional cooling properties and ICON-engineered coil springs for superior vehicle “feel” through the range of travel. These coilovers are also height adjustable from 0-3.5” for 2005-2015 models or 0-2.75" for 2016-2023 models, allowing the use of larger, more aggressive wheel and tire combinations. Used in conjunction with the included ICON upper control arm, these extended travel coilovers add increased droop travel to the front suspension. The included ICON billet aluminum upper control arm kit is designed to improve the overall performance of the Toyota Tacoma with corrected front-end geometry, increased on-vehicle camber and caster adjustment, and improved suspension component clearance. To increase the ride quality of the truck and gain additional droop travel, the ICON RXT multi-rate leaf springs are added to the rear. Designed with an additional leaf (included with kit) that can be exchanged or added to the pack to yield an additional 10-20% spring rate, this leaf spring is perfect for drivers seeking improved rear ride quality in an “unloaded” vehicle as well as those that are have outfitted their trucks with a significant amount of weight in the form of a bed rack, roof top tent, spare tires, parts, or other additions. To compliment this increase in rear wheel travel the Stage 8 system includes a unique 2.5 Aluminum Series remote reservoir shock that features a side-mount eyelet that making it shorter in collapsed length, longer at extension, and still fits in the factory mounting location. A large ten-inch remote reservoir was added to aid in heat dissipation and resist shock fade during spirited driving.Installation InstructionsInstallation InstructionsInstallation InstructionsInstallation InstructionsInstallation InstructionsInstallation InstructionsInstallation InstructionsInstallation InstructionsThis Part Fits: Year Make Model Submodel 2005-2015 Toyota Tacoma Base 2016-2023 Toyota Tacoma Limited 2005-2015 Toyota Tacoma Pre Runner 2016-2023 Toyota Tacoma SR 2016-2023 Toyota Tacoma SR5 2021 Toyota Tacoma Trail 2023 Toyota Tacoma Trail Special Edition 2016-2023 Toyota Tacoma TRD Off-Road 2015,2017-2023 Toyota Tacoma TRD Pro 2016-2023 Toyota Tacoma TRD Sport 2005-2013 Toyota Tacoma X-Runner

The Stage 9 system includes vehicle-specific tuned 2.5 Series Extended Travel coilover shocks featuring a remote reservoir with CDCV for exceptional cooling properties and ICON-engineered coil springs for superior vehicle “feel” through the range of travel. These coilovers are also height adjustable from 0-3.5” for 2005-2015 models or 0-2.75" for 2016-2023 models, allowing the use of larger, more aggressive wheel and tire combinations. Used in conjunction with the included ICON upper control arm, these extended travel coilovers add increased droop travel to the front suspension. The included ICON billet aluminum upper control arm kit is designed to improve the overall performance of the Toyota Tacoma with corrected front-end geometry, increased on-vehicle camber and caster adjustment, and improved suspension component clearance. To increase the ride quality of the truck and gain additional droop travel, the ICON RXT multi-rate leaf springs are added to the rear. Designed with an additional leaf (included with kit) that can be exchanged or added to the pack to yield an additional 10-20% spring rate, this leaf spring is perfect for drivers seeking improved rear ride quality in an “unloaded” vehicle as well as those that are have outfitted their trucks with a significant amount of weight in the form of a bed rack, roof top tent, spare tires, parts, or other additions. To compliment this increase in rear wheel travel the Stage 9 system includes a unique 2.5 Aluminum Series remote reservoir shock with CDCV that features a side-mount eyelet that making it shorter in collapsed length, longer at extension, and still fits in the factory mounting location. A large ten-inch remote reservoir was added to aid in heat dissipation and resist shock fade during spirited driving. The included ICON CDC Valves are externally adjustable valves that restricts oil flow into the reservoir which creates 10 levels of compression damping force ranges.Installation InstructionsInstallation InstructionsInstallation InstructionsInstallation InstructionsInstallation InstructionsInstallation InstructionsInstallation InstructionsInstallation InstructionsThis Part Fits: Year Make Model Submodel 2005-2015 Toyota Tacoma Base 2016-2023 Toyota Tacoma Limited 2005-2015 Toyota Tacoma Pre Runner 2016-2023 Toyota Tacoma SR 2016-2023 Toyota Tacoma SR5 2021 Toyota Tacoma Trail 2023 Toyota Tacoma Trail Special Edition 2016-2023 Toyota Tacoma TRD Off-Road 2015,2017-2023 Toyota Tacoma TRD Pro 2016-2023 Toyota Tacoma TRD Sport 2005-2013 Toyota Tacoma X-Runner

The Stage 10 system includes vehicle-specific tuned 2.5 Series Extended Travel coilover shocks featuring a remote reservoir with CDCV for exceptional cooling properties and ICON-engineered coil springs for superior vehicle “feel” through the range of travel. The included ICON CDC Valves are externally adjustable valves that restricts oil flow into the reservoir which creates 10 levels of compression damping force ranges. These coilovers are also height adjustable from 0-3.5” for 2005-2015 models or 0-2.75" for 2016-2023 models, allowing the use of larger, more aggressive wheel and tire combinations. Used in conjunction with the included ICON upper control arm, these extended travel coilovers add increased droop travel to the front suspension. The included ICON billet aluminum upper control arm kit is designed to improve the overall performance of the Toyota Tacoma with corrected front-end geometry, increased on-vehicle camber and caster adjustment, and improved suspension component clearance. To increase the ride quality of the truck and gain additional droop travel, the ICON RXT multi-rate leaf springs are added to the rear. Designed with an additional leaf (included with kit) that can be exchanged or added to the pack to yield an additional 10-20% spring rate, this leaf spring is perfect for drivers seeking improved rear ride quality in an “unloaded” vehicle as well as those that are have outfitted their trucks with a significant amount of weight in the form of a bed rack, roof top tent, spare tires, parts, or other additions.Installation InstructionsInstallation InstructionsInstallation InstructionsInstallation InstructionsInstallation InstructionsInstallation InstructionsInstallation InstructionsThis Part Fits: Year Make Model Submodel 2005-2015 Toyota Tacoma Base 2016-2023 Toyota Tacoma Limited 2005-2015 Toyota Tacoma Pre Runner 2016-2023 Toyota Tacoma SR 2016-2023 Toyota Tacoma SR5 2021 Toyota Tacoma Trail 2023 Toyota Tacoma Trail Special Edition 2016-2023 Toyota Tacoma TRD Off-Road 2015,2017-2023 Toyota Tacoma TRD Pro 2016-2023 Toyota Tacoma TRD Sport 2005-2013 Toyota Tacoma X-Runner

This system features tubular steel upper control arms with ICON's patented Delta Joint. The Delta Joint is a heavy duty high angle ball joint that combines the durability of a ball joint with the performance characteristics of a traditional uniball. While the industry standard uniball does a great job of allowing the control arms of a vehicle to articulate with little bind, they do have an inherent weakness that leaves more to be desired when used in a daily driven application - exposure to the elements. The Delta Joint features a zinc plated housing providing the first layer of corrosion resistance, while a tough grease seal keeps potentially harmful elements out of the inner workings of the joint. Metal on metal construction and a greasable design increase the longevity of the Delta Joint while at the same time allowing for noise-free operation. What makes the Delta Joint unique is that it brings the best of both worlds to ICON upper control arms with features that make it more robust than a uniball, and at the same time capable of greater angularity than a typical ball joint.Installation InstructionsInstallation InstructionsInstallation InstructionsInstallation InstructionsInstallation InstructionsInstallation InstructionsThis Part Fits: Year Make Model Submodel 2005-2015 Toyota Tacoma Base 2016-2021 Toyota Tacoma Limited 2005-2015 Toyota Tacoma Pre Runner 2016-2021 Toyota Tacoma SR 2016-2021 Toyota Tacoma SR5 2021 Toyota Tacoma Trail 2016-2021 Toyota Tacoma TRD Off-Road 2015,2017-2021 Toyota Tacoma TRD Pro 2016-2021 Toyota Tacoma TRD Sport 2005-2013 Toyota Tacoma X-Runner

This system features tubular steel upper control arms with ICON's patented Delta Joint. The Delta Joint is a heavy duty high angle ball joint that combines the durability of a ball joint with the performance characteristics of a traditional uniball. While the industry standard uniball does a great job of allowing the control arms of a vehicle to articulate with little bind, they do have an inherent weakness that leaves more to be desired when used in a daily driven application - exposure to the elements. The Delta Joint features a zinc plated housing providing the first layer of corrosion resistance, while a tough grease seal keeps potentially harmful elements out of the inner workings of the joint. Metal on metal construction and a greasable design increase the longevity of the Delta Joint while at the same time allowing for noise-free operation. What makes the Delta Joint unique is that it brings the best of both worlds to ICON upper control arms with features that make it more robust than a uniball, and at the same time capable of greater angularity than a typical ball joint.Installation InstructionsInstallation InstructionsInstallation InstructionsInstallation InstructionsInstallation InstructionsInstallation InstructionsThis Part Fits: Year Make Model Submodel 2005-2015 Toyota Tacoma Base 2016-2021 Toyota Tacoma Limited 2005-2015 Toyota Tacoma Pre Runner 2016-2021 Toyota Tacoma SR 2016-2021 Toyota Tacoma SR5 2021 Toyota Tacoma Trail 2016-2021 Toyota Tacoma TRD Off-Road 2015,2017-2021 Toyota Tacoma TRD Pro 2016-2021 Toyota Tacoma TRD Sport 2005-2013 Toyota Tacoma X-Runner

This system features tubular steel upper control arms with ICON's patented Delta Joint. The Delta Joint is a heavy duty high angle ball joint that combines the durability of a ball joint with the performance characteristics of a traditional uniball. While the industry standard uniball does a great job of allowing the control arms of a vehicle to articulate with little bind, they do have an inherent weakness that leaves more to be desired when used in a daily driven application - exposure to the elements. The Delta Joint features a zinc plated housing providing the first layer of corrosion resistance, while a tough grease seal keeps potentially harmful elements out of the inner workings of the joint. Metal on metal construction and a greasable design increase the longevity of the Delta Joint while at the same time allowing for noise-free operation. What makes the Delta Joint unique is that it brings the best of both worlds to ICON upper control arms with features that make it more robust than a uniball, and at the same time capable of greater angularity than a typical ball joint.Installation InstructionsInstallation InstructionsInstallation InstructionsInstallation InstructionsInstallation InstructionsInstallation InstructionsThis Part Fits: Year Make Model Submodel 2005-2015 Toyota Tacoma Base 2016-2021 Toyota Tacoma Limited 2005-2015 Toyota Tacoma Pre Runner 2016-2021 Toyota Tacoma SR 2016-2021 Toyota Tacoma SR5 2021 Toyota Tacoma Trail 2016-2021 Toyota Tacoma TRD Off-Road 2015,2017-2021 Toyota Tacoma TRD Pro 2016-2021 Toyota Tacoma TRD Sport 2005-2013 Toyota Tacoma X-Runner

ICON Vehicle Dynamics Toyota Tacoma suspension systems are designed with maximum performance and the serious driver in mind. ICON engineers’ primary focus is to increase wheel travel and damping ability, which translates into outstanding vehicle control and ride quality both on and off-road. The Stage 3 system includes vehicle-specific tuned 2.5” Extended Travel coilover shocks featuring an internal reservoir for exceptional cooling properties and ICON-engineered coil springs for superior vehicle “feel” through the range of travel. These coilovers are also height adjustable from 0-3.5” of lift on 2005-2015 or 0-2.75” on 2016-2023 models, allowing the use of larger, more aggressive wheel and tire combinations. When used with an ICON upper control arm, these extended travel coilovers add increased droop travel to the front suspension. The included ICON billet aluminum upper control arm kit is designed to improve the overall performance of the Toyota Tacoma with corrected front-end geometry, increased on-vehicle camber and caster adjustment, and improved suspension component clearance. Additionally, replacing the OE ball joint with the serviceable ICON Delta Joint allows for full bump and droop travel of the front suspension while eliminating bind. The included rear Add-A-Leaf Kit Installs in place of the factory overload leaves and effectively lowers the rear spring rate by approximately 10% for a more compliant ride while also providing 1.5" of rear lift over stock. ICON 2.0 Aluminum Series Remote Reservoir rear shocks utilize a vehicle-specific valving that balances the performance of the truck from front to rear. The ICON Vehicle Dynamics 2005-2023 Toyota Tacoma Stage 3 suspension system is an excellent choice for those drivers looking to enhance the capabilities of their pickup on the road as well as in the dirt.Installation InstructionsInstallation InstructionsInstallation InstructionsInstallation InstructionsInstallation InstructionsInstallation InstructionsThis Part Fits: Year Make Model Submodel 2005-2015 Toyota Tacoma Base 2016-2023 Toyota Tacoma Limited 2005-2015 Toyota Tacoma Pre Runner 2016-2023 Toyota Tacoma SR 2016-2023 Toyota Tacoma SR5 2021 Toyota Tacoma Trail 2023 Toyota Tacoma Trail Special Edition 2016-2023 Toyota Tacoma TRD Off-Road 2015,2017-2023 Toyota Tacoma TRD Pro 2016-2023 Toyota Tacoma TRD Sport 2005-2013 Toyota Tacoma X-Runner

This system features upper control arms with ICON's patented Delta Joint. The Delta Joint is a heavy-duty high angle ball joint that combines the durability of a ball joint with the performance characteristics of a traditional uniball. While the industry standard uniball does a great job of allowing the control arms of a vehicle to articulate with little bind, they do have an inherent weakness that leaves more to be desired when used in a daily driven application - exposure to the elements. The Delta Joint features a zinc plated housing providing the first layer of corrosion resistance, while a tough grease seal keeps potentially harmful elements out of the inner workings of the joint. Metal on metal construction and a greaseable design increase the longevity of the Delta Joint while at the same time allowing for noise-free operation. What makes the Delta Joint unique is that it brings the best of both worlds to ICON upper control arms with features that make it more robust than a uniball, and at the same time capable of greater angularity than a typical ball joint.Installation InstructionsInstallation InstructionsInstallation InstructionsInstallation InstructionsInstallation InstructionsThis Part Fits: Year Make Model Submodel 2005-2015 Toyota Tacoma Base 2016-2021 Toyota Tacoma Limited 2005-2015 Toyota Tacoma Pre Runner 2016-2021 Toyota Tacoma SR 2016-2021 Toyota Tacoma SR5 2021 Toyota Tacoma Trail 2016-2021 Toyota Tacoma TRD Off-Road 2015,2017-2021 Toyota Tacoma TRD Pro 2016-2021 Toyota Tacoma TRD Sport 2005-2013 Toyota Tacoma X-Runner

ICON Vehicle Dynamics Toyota Tacoma suspension systems are designed with maximum performance and the serious driver in mind. ICON engineers’ primary focus is to increase wheel travel and damping ability, which translates into outstanding vehicle control and ride quality both on and off-road. The Stage 4 system includes vehicle-specific tuned 2.5” Extended Travel coilover shocks featuring remote reservoirs for exceptional cooling properties and ICON-engineered coil springs for superior vehicle “feel” through the range of travel. These coilovers are also height adjustable from 0-3.5” of lift on 2005-2015 or 0-2.75” on 2016-2023 models, allowing the use of larger, more aggressive wheel and tire combinations. When used with an ICON upper control arm, these extended travel coilovers add increased droop travel to the front suspension. The included ICON billet aluminum upper control arm kit is designed to improve the overall performance of the Toyota Tacoma with corrected front-end geometry, increased on-vehicle camber and caster adjustment, and improved suspension component clearance. Additionally, replacing the OE ball joint with the serviceable ICON Delta Joint allows for full bump and droop travel of the front suspension while eliminating bind. The included rear Add-A-Leaf Kit Installs in place of the factory overload leaves and effectively lowers the rear spring rate by approximately 10% for a more compliant ride while also providing 1.5" of rear lift over stock. ICON 2.0 Aluminum Series Remote Reservoir rear shocks utilize a vehicle-specific valving that balances the performance of the truck from front to rear. The ICON Vehicle Dynamics 2005-2023 Toyota Tacoma Stage 4 suspension system is an excellent choice for those drivers looking to enhance the capabilities of their pickup on the road as well as in the dirt.Installation InstructionsInstallation InstructionsInstallation InstructionsInstallation InstructionsInstallation InstructionsInstallation InstructionsThis Part Fits: Year Make Model Submodel 2005-2015 Toyota Tacoma Base 2016-2023 Toyota Tacoma Limited 2005-2015 Toyota Tacoma Pre Runner 2016-2023 Toyota Tacoma SR 2016-2023 Toyota Tacoma SR5 2021 Toyota Tacoma Trail 2023 Toyota Tacoma Trail Special Edition 2016-2023 Toyota Tacoma TRD Off-Road 2015,2017-2023 Toyota Tacoma TRD Pro 2016-2023 Toyota Tacoma TRD Sport 2005-2013 Toyota Tacoma X-Runner

This system features upper control arms with ICON's patented Delta Joint. The Delta Joint is a heavy-duty high angle ball joint that combines the durability of a ball joint with the performance characteristics of a traditional uniball. While the industry standard uniball does a great job of allowing the control arms of a vehicle to articulate with little bind, they do have an inherent weakness that leaves more to be desired when used in a daily driven application - exposure to the elements. The Delta Joint features a zinc plated housing providing the first layer of corrosion resistance, while a tough grease seal keeps potentially harmful elements out of the inner workings of the joint. Metal on metal construction and a greaseable design increase the longevity of the Delta Joint while at the same time allowing for noise-free operation. What makes the Delta Joint unique is that it brings the best of both worlds to ICON upper control arms with features that make it more robust than a uniball, and at the same time capable of greater angularity than a typical ball joint.Installation InstructionsInstallation InstructionsInstallation InstructionsInstallation InstructionsInstallation InstructionsThis Part Fits: Year Make Model Submodel 2005-2015 Toyota Tacoma Base 2016-2021 Toyota Tacoma Limited 2005-2015 Toyota Tacoma Pre Runner 2016-2021 Toyota Tacoma SR 2016-2021 Toyota Tacoma SR5 2021 Toyota Tacoma Trail 2016-2021 Toyota Tacoma TRD Off-Road 2015,2017-2021 Toyota Tacoma TRD Pro 2016-2021 Toyota Tacoma TRD Sport 2005-2013 Toyota Tacoma X-Runner

ICON Vehicle Dynamics Toyota Tacoma suspension systems are designed with maximum performance and the serious driver in mind. ICON engineers’ primary focus is to increase wheel travel and damping ability, which translates into outstanding vehicle control and ride quality both on and off-road. The Stage 5 system includes vehicle-specific tuned 2.5” Extended Travel coilover shocks featuring remote reservoirs for exceptional cooling properties and ICON-engineered coil springs for superior vehicle “feel” through the range of travel. These coilovers are also height adjustable from 0-3.5” of lift on 2005-2015 or 0-2.75” on 2016-2023 models, allowing the use of larger, more aggressive wheel and tire combinations. When used with an ICON upper control arm, these extended travel coilovers add increased droop travel to the front suspension. The included ICON billet aluminum upper control arm kit is designed to improve the overall performance of the Toyota Tacoma with corrected front-end geometry, increased on-vehicle camber and caster adjustment, and improved suspension component clearance. Additionally, replacing the OE ball joint with the serviceable ICON Delta Joint allows for full bump and droop travel of the front suspension while eliminating bind. The included rear Add-A-Leaf Kit Installs in place of the factory overload leaves and effectively lowers the rear spring rate by approximately 10% for a more compliant ride while also providing 1.5" of rear lift over stock. ICON 2.5 Aluminum Series Remote Reservoir rear shocks utilize a vehicle-specific valving that balances the performance of the truck from front to rear. The ICON Vehicle Dynamics 2005-2023 Toyota Tacoma Stage 5 suspension system is an excellent choice for those drivers looking to enhance the capabilities of their pickup on the road as well as in the dirt.Installation InstructionsInstallation InstructionsInstallation InstructionsInstallation InstructionsInstallation InstructionsThis Part Fits: Year Make Model Submodel 2005-2015 Toyota Tacoma Base 2016-2023 Toyota Tacoma Limited 2005-2015 Toyota Tacoma Pre Runner 2016-2023 Toyota Tacoma SR 2016-2023 Toyota Tacoma SR5 2021 Toyota Tacoma Trail 2023 Toyota Tacoma Trail Special Edition 2016-2023 Toyota Tacoma TRD Off-Road 2015,2017-2023 Toyota Tacoma TRD Pro 2016-2023 Toyota Tacoma TRD Sport 2005-2013 Toyota Tacoma X-Runner

This system features upper control arms with ICON's patented Delta Joint. The Delta Joint is a heavy-duty high angle ball joint that combines the durability of a ball joint with the performance characteristics of a traditional uniball. While the industry standard uniball does a great job of allowing the control arms of a vehicle to articulate with little bind, they do have an inherent weakness that leaves more to be desired when used in a daily driven application - exposure to the elements. The Delta Joint features a zinc plated housing providing the first layer of corrosion resistance, while a tough grease seal keeps potentially harmful elements out of the inner workings of the joint. Metal on metal construction and a greaseable design increase the longevity of the Delta Joint while at the same time allowing for noise-free operation. What makes the Delta Joint unique is that it brings the best of both worlds to ICON upper control arms with features that make it more robust than a uniball, and at the same time capable of greater angularity than a typical ball joint.Installation InstructionsInstallation InstructionsInstallation InstructionsInstallation InstructionsInstallation InstructionsThis Part Fits: Year Make Model Submodel 2005-2015 Toyota Tacoma Base 2016-2021 Toyota Tacoma Limited 2005-2015 Toyota Tacoma Pre Runner 2016-2021 Toyota Tacoma SR 2016-2021 Toyota Tacoma SR5 2021 Toyota Tacoma Trail 2016-2021 Toyota Tacoma TRD Off-Road 2015,2017-2021 Toyota Tacoma TRD Pro 2016-2021 Toyota Tacoma TRD Sport 2005-2013 Toyota Tacoma X-Runner

ICON Vehicle Dynamics Toyota Tacoma suspension systems are designed with maximum performance and the serious driver in mind. ICON engineers’ primary focus is to increase wheel travel and damping ability, which translates into outstanding vehicle control and ride quality both on and off-road. The Stage 6 system includes vehicle-specific tuned 2.5” Extended Travel coilover shocks featuring remote reservoirs equipped with CDCV for exceptional cooling properties and adjustable compression damping as well as ICON-engineered coil springs for superior vehicle “feel” through the range of travel. These coilovers are also height adjustable from 0-3.5” of lift on 2005-2015 or 0-2.75” on 2016-2023 models, allowing the use of larger, more aggressive wheel and tire combinations. The included ICON billet aluminum upper control arm kit is designed to improve the overall performance of the Toyota Tacoma with corrected front-end geometry, increased on-vehicle camber and caster adjustment, and improved suspension component clearance. Additionally, replacing the OE ball joint with the serviceable ICON Delta Joint allows for full bump and droop travel of the front suspension while eliminating bind. The included rear Add-A-Leaf Kit Installs in place of the factory overload leaves and effectively lowers the rear spring rate by approximately 10% for a more compliant ride while also providing 1.5" of rear lift over stock. ICON 2.5 Aluminum Series Remote Reservoir rear shocks with CDCV utilize a vehicle-specific valving that balances the performance of the truck from front to rear. The included ICON CDC Valves are externally adjustable valves that restricts oil flow into the reservoir which creates 10 levels of compression damping force ranges. The ICON Vehicle Dynamics 2005-2023 Toyota Tacoma Stage 6 suspension system is an excellent choice for those drivers looking to enhance the capabilities of their pickup on the road as well as in the dirt.Installation InstructionsInstallation InstructionsInstallation InstructionsInstallation InstructionsThis Part Fits: Year Make Model Submodel 2005-2015 Toyota Tacoma Base 2016-2023 Toyota Tacoma Limited 2005-2015 Toyota Tacoma Pre Runner 2016-2023 Toyota Tacoma SR 2016-2023 Toyota Tacoma SR5 2021 Toyota Tacoma Trail 2023 Toyota Tacoma Trail Special Edition 2016-2023 Toyota Tacoma TRD Off-Road 2015,2017-2023 Toyota Tacoma TRD Pro 2016-2023 Toyota Tacoma TRD Sport 2005-2013 Toyota Tacoma X-Runner

This system features billet aluminum upper control arms with ICON's patented Delta Joint. The Delta Joint is a heavy-duty high angle ball joint that combines the durability of a ball joint with the performance characteristics of a traditional uniball. While the industry standard uniball does a great job of allowing the control arms of a vehicle to articulate with little bind, they do have an inherent weakness that leaves more to be desired when used in a daily driven application - exposure to the elements. The Delta Joint features a zinc plated housing providing the first layer of corrosion resistance, while a tough grease seal keeps potentially harmful elements out of the inner workings of the joint. Metal on metal construction and a greaseable design increase the longevity of the Delta Joint while at the same time allowing for noise-free operation. What makes the Delta Joint unique is that it brings the best of both worlds to ICON upper control arms with features that make it more robust than a uniball, and at the same time capable of greater angularity than a typical ball joint.Installation InstructionsInstallation InstructionsInstallation InstructionsInstallation InstructionsThis Part Fits: Year Make Model Submodel 2005-2015 Toyota Tacoma Base 2016-2021 Toyota Tacoma Limited 2005-2015 Toyota Tacoma Pre Runner 2016-2021 Toyota Tacoma SR 2016-2021 Toyota Tacoma SR5 2021 Toyota Tacoma Trail 2016-2021 Toyota Tacoma TRD Off-Road 2015,2017-2021 Toyota Tacoma TRD Pro 2016-2021 Toyota Tacoma TRD Sport 2005-2013 Toyota Tacoma X-Runner

ICON Vehicle Dynamics Toyota Tacoma suspension systems are designed with maximum performance and the serious driver in mind. ICON engineers’ primary focus is to increase wheel travel and damping ability, which translates into outstanding vehicle control and ride quality both on and off-road. The Stage 7 system includes vehicle-specific tuned 2.5” Extended Travel coilover shocks featuring remote reservoirs equipped with CDCV for exceptional cooling properties and adjustable compression damping as well as ICON-engineered coil springs for superior vehicle “feel” through the range of travel. The ICON CDC Valves are externally adjustable valves that restricts oil flow into the reservoir which creates 10 levels of compression damping force ranges. These coilovers are also height adjustable from 0-3.5” of lift on 2005-2015 or 0-2.75” on 2016-2023 models, allowing the use of larger, more aggressive wheel and tire combinations. The included ICON billet aluminum upper control arm kit is designed to improve the overall performance of the Toyota Tacoma with corrected front-end geometry, increased on-vehicle camber and caster adjustment, and improved suspension component clearance. The included rear Add-A-Leaf Kit Installs in place of the factory overload leaves and effectively lowers the rear spring rate by approximately 10% for a more compliant ride while also providing 1.5" of rear lift over stock. 2.5 Series Omega Bypass rear shocks combine vehicle-specific valving, multiple shock damping zones, and 28 settings of compression and rebound adjustment to give end-users ultimate control of the performance and ride quality of the rear of the Tacoma. The ICON Vehicle Dynamics 2005-2023 Toyota Tacoma Stage 7 suspension system is an excellent choice for those drivers looking to enhance the capabilities of their pickup on the road as well as in the dirt.Installation InstructionsInstallation InstructionsInstallation InstructionsInstallation InstructionsInstallation InstructionsThis Part Fits: Year Make Model Submodel 2005-2015 Toyota Tacoma Base 2016-2023 Toyota Tacoma Limited 2005-2015 Toyota Tacoma Pre Runner 2016-2023 Toyota Tacoma SR 2016-2023 Toyota Tacoma SR5 2021 Toyota Tacoma Trail 2023 Toyota Tacoma Trail Special Edition 2016-2023 Toyota Tacoma TRD Off-Road 2015,2017-2023 Toyota Tacoma TRD Pro 2016-2023 Toyota Tacoma TRD Sport 2005-2013 Toyota Tacoma X-Runner

This system features billet aluminum upper control arms with ICON's patented Delta Joint. The Delta Joint is a heavy-duty high angle ball joint that combines the durability of a ball joint with the performance characteristics of a traditional uniball. While the industry standard uniball does a great job of allowing the control arms of a vehicle to articulate with little bind, they do have an inherent weakness that leaves more to be desired when used in a daily driven application - exposure to the elements. The Delta Joint features a zinc plated housing providing the first layer of corrosion resistance, while a tough grease seal keeps potentially harmful elements out of the inner workings of the joint. Metal on metal construction and a greaseable design increase the longevity of the Delta Joint while at the same time allowing for noise-free operation. What makes the Delta Joint unique is that it brings the best of both worlds to ICON upper control arms with features that make it more robust than a uniball, and at the same time capable of greater angularity than a typical ball joint.Installation InstructionsInstallation InstructionsInstallation InstructionsInstallation InstructionsInstallation InstructionsThis Part Fits: Year Make Model Submodel 2005-2015 Toyota Tacoma Base 2016-2021 Toyota Tacoma Limited 2005-2015 Toyota Tacoma Pre Runner 2016-2021 Toyota Tacoma SR 2016-2021 Toyota Tacoma SR5 2021 Toyota Tacoma Trail 2016-2021 Toyota Tacoma TRD Off-Road 2015,2017-2021 Toyota Tacoma TRD Pro 2016-2021 Toyota Tacoma TRD Sport 2005-2013 Toyota Tacoma X-Runner

ICON Intelligent Control (IIC) is the computer that monitors, analyzes, and processes data in real-time. Information from the onboard G-force sensor and Gyroscope perform calculations based on algorithms and user-defined settings to predict terrain and wheel position. IIC has the capability to collect information at over 1000 times per second, process the data and make adjustments, then deliver those changes to Compression Damping Electronic Valve (CDEV) in the shock absorbers in under 40 milliseconds. IIC also works as a data driver to connect the user to ICON’s proprietary mobile App interface for monitoring and adjusting shock settings. The IIC is mounted to the 2005-2015 Tacoma using application specific mounting brackets, hardware and wire harnesses, ensuring an easy and clean looking install.Installation InstructionsInstallation InstructionsInstallation InstructionsThis Part Fits: Year Make Model Submodel 2005-2015 Toyota Tacoma Base 2005-2015 Toyota Tacoma Pre Runner 2015 Toyota Tacoma TRD Pro

ICON's 2.5 VS Series Remote Reservoir Bolt-In Coilover Conversion Kit will add a new level of performance and adjustability to 2005-2016 F-250 and F-350 trucks. The advantage of utilizing a coilover conversion kit is that they have been designed to increase the overall damping ability of the vehicle while at the same time allowing for user-defined ride height adjustment. The 2.5" Remote Reservoir Coilover featured in these kits is based off of ICON’s 2.5 VS Series shock line - meaning that features like Eibach coil springs, FK Rod End bearings, and vehicle-specific valving come standard. Quality machined components and a fully serviceable design make for a product that will stand the test of time, yet retain the ability to be rebuilt or re-valved as necessary.Installation InstructionsInstallation InstructionsThis Part Fits: Year Make Model Submodel 2009-2010 Ford F-250 Super Duty Cabela's 2008-2009 Ford F-250 Super Duty FX4 2005-2010 Ford F-250 Super Duty Harley-Davidson Edition 2005-2016 Ford F-250 Super Duty King Ranch 2005-2016 Ford F-250 Super Duty Lariat 2013-2016 Ford F-250 Super Duty Platinum 2005-2016 Ford F-250 Super Duty XL 2005-2016 Ford F-250 Super Duty XLT 2009-2010 Ford F-350 Super Duty Cabela's 2008-2009 Ford F-350 Super Duty FX4 2005-2010 Ford F-350 Super Duty Harley-Davidson Edition 2005-2016 Ford F-350 Super Duty King Ranch 2005-2016 Ford F-350 Super Duty Lariat 2013-2016 Ford F-350 Super Duty Platinum 2005-2016 Ford F-350 Super Duty XL 2005-2016 Ford F-350 Super Duty XLT

ICON's 2.5 VS Series Remote Reservoir Bolt-In Coilover Conversion Kit will add a new level of performance and adjustability to 2005-2016 F-250 and F-350 trucks. The advantage of utilizing a coilover conversion kit is that they have been designed to increase the overall damping ability of the vehicle while at the same time allowing for user-defined ride height adjustment. The 2.5" Remote Reservoir Coilover featured in these kits is based off of ICON’s 2.5 VS Series shock line - meaning that features like Eibach coil springs, FK Rod End bearings, and vehicle-specific valving come standard. Quality machined components and a fully serviceable design make for a product that will stand the test of time, yet retain the ability to be rebuilt or re-valved as necessary.Installation InstructionsInstallation InstructionsInstallation InstructionsThis Part Fits: Year Make Model Submodel 2009-2010 Ford F-250 Super Duty Cabela's 2008-2009 Ford F-250 Super Duty FX4 2005-2010 Ford F-250 Super Duty Harley-Davidson Edition 2005-2016 Ford F-250 Super Duty King Ranch 2005-2016 Ford F-250 Super Duty Lariat 2013-2016 Ford F-250 Super Duty Platinum 2005-2016 Ford F-250 Super Duty XL 2005-2016 Ford F-250 Super Duty XLT 2009-2010 Ford F-350 Super Duty Cabela's 2008-2009 Ford F-350 Super Duty FX4 2005-2010 Ford F-350 Super Duty Harley-Davidson Edition 2005-2016 Ford F-350 Super Duty King Ranch 2005-2016 Ford F-350 Super Duty Lariat 2013-2016 Ford F-350 Super Duty Platinum 2005-2016 Ford F-350 Super Duty XL 2005-2016 Ford F-350 Super Duty XLT

ICON's 2.5 VS Series Remote Reservoir Bolt-In Coilover Conversion Kit will add a new level of performance and adjustability to 2005-2016 F-250 and F-350 trucks. The advantage of utilizing a coilover conversion kit is that they have been designed to increase the overall damping ability of the vehicle while at the same time allowing for user-defined ride height adjustment. The 2.5" Remote Reservoir Coilover featured in these kits is based off of ICON’s 2.5 VS Series shock line - meaning that features like Eibach coil springs, FK Rod End bearings, and vehicle-specific valving come standard. Rear 2.5 Aluminum Series piggyback shocks feature one-piece impact extruded aluminum cylinders that offer lighter weight, improved corrosion resistance, and a more uniform finish than traditional plated steel cylinders. Quality machined components and a fully serviceable design make for a product that will stand the test of time, yet retain the ability to be rebuilt or re-valved as necessary.Installation InstructionsInstallation InstructionsInstallation InstructionsInstallation InstructionsThis Part Fits: Year Make Model Submodel 2009-2010 Ford F-250 Super Duty Cabela's 2008-2009 Ford F-250 Super Duty FX4 2005-2010 Ford F-250 Super Duty Harley-Davidson Edition 2005-2016 Ford F-250 Super Duty King Ranch 2005-2016 Ford F-250 Super Duty Lariat 2013-2016 Ford F-250 Super Duty Platinum 2005-2016 Ford F-250 Super Duty XL 2005-2016 Ford F-250 Super Duty XLT 2009-2010 Ford F-350 Super Duty Cabela's 2008-2009 Ford F-350 Super Duty FX4 2005-2010 Ford F-350 Super Duty Harley-Davidson Edition 2005-2016 Ford F-350 Super Duty King Ranch 2005-2016 Ford F-350 Super Duty Lariat 2013-2016 Ford F-350 Super Duty Platinum 2005-2016 Ford F-350 Super Duty XL 2005-2016 Ford F-350 Super Duty XLT

ICON's 2.5 Series Remote Reservoir Bolt-In Coilover Conversion Kit will add a new level of performance and adjustability to 2005-2016 F-250 and F-350 trucks. The advantage of utilizing a coilover conversion kit is that they have been designed to increase the overall damping ability of the vehicle while at the same time allowing for user-defined ride height adjustment. The 2.5" Remote Reservoir Coilover featured in these kits is based off of ICON’s 2.5 Series shock line - meaning that features like Eibach coil springs, FK Rod End bearings, and vehicle-specific valving come standard. Quality machined components and a fully serviceable design make for a product that will stand the test of time, yet retain the ability to be rebuilt or re-valved as necessary.Installation InstructionsInstallation InstructionsInstallation InstructionsInstallation InstructionsInstallation InstructionsInstallation InstructionsThis Part Fits: Year Make Model Submodel 2009-2010 Ford F-250 Super Duty Cabela's 2008-2009 Ford F-250 Super Duty FX4 2005-2010 Ford F-250 Super Duty Harley-Davidson Edition 2005-2016 Ford F-250 Super Duty King Ranch 2005-2016 Ford F-250 Super Duty Lariat 2013-2016 Ford F-250 Super Duty Platinum 2005-2016 Ford F-250 Super Duty XL 2005-2016 Ford F-250 Super Duty XLT 2009-2010 Ford F-350 Super Duty Cabela's 2008-2009 Ford F-350 Super Duty FX4 2005-2010 Ford F-350 Super Duty Harley-Davidson Edition 2005-2016 Ford F-350 Super Duty King Ranch 2005-2016 Ford F-350 Super Duty Lariat 2013-2016 Ford F-350 Super Duty Platinum 2005-2016 Ford F-350 Super Duty XL 2005-2016 Ford F-350 Super Duty XLT

ICON's 2.5 Series Remote Reservoir Bolt-In Coilover Conversion Kit will add a new level of performance and adjustability to 2005-2016 F-250 and F-350 trucks. The advantage of utilizing a coilover conversion kit is that they have been designed to increase the overall damping ability of the vehicle while at the same time allowing for user-defined ride height adjustment. The 2.5" Remote Reservoir Coilover featured in these kits is based off of ICON’s 2.5 Series shock line - meaning that features like Eibach coil springs, FK Rod End bearings, and vehicle-specific valving come standard. Quality machined components and a fully serviceable design make for a product that will stand the test of time, yet retain the ability to be rebuilt or re-valved as necessary.Installation InstructionsInstallation InstructionsInstallation InstructionsInstallation InstructionsInstallation InstructionsInstallation InstructionsInstallation InstructionsInstallation InstructionsThis Part Fits: Year Make Model Submodel 2009-2010 Ford F-250 Super Duty Cabela's 2008-2009 Ford F-250 Super Duty FX4 2005-2010 Ford F-250 Super Duty Harley-Davidson Edition 2005-2016 Ford F-250 Super Duty King Ranch 2005-2016 Ford F-250 Super Duty Lariat 2013-2016 Ford F-250 Super Duty Platinum 2005-2016 Ford F-250 Super Duty XL 2005-2016 Ford F-250 Super Duty XLT 2009-2010 Ford F-350 Super Duty Cabela's 2008-2009 Ford F-350 Super Duty FX4 2005-2010 Ford F-350 Super Duty Harley-Davidson Edition 2005-2016 Ford F-350 Super Duty King Ranch 2005-2016 Ford F-350 Super Duty Lariat 2013-2016 Ford F-350 Super Duty Platinum 2005-2016 Ford F-350 Super Duty XL 2005-2016 Ford F-350 Super Duty XLT

For F250 applications, a 4" block can be used in place of your factory 2" block, in turn leveling the truck from front to rear, allowing use of ICON Rear Shocks.Installation InstructionsInstallation InstructionsThis Part Fits: Year Make Model Submodel 2009-2010 Ford F-250 Super Duty Cabela's 2008-2009 Ford F-250 Super Duty FX4 2005-2010 Ford F-250 Super Duty Harley-Davidson Edition 2005-2016 Ford F-250 Super Duty King Ranch 2005-2016 Ford F-250 Super Duty Lariat 2013-2016 Ford F-250 Super Duty Platinum 2005-2016 Ford F-250 Super Duty XL 2005-2016 Ford F-250 Super Duty XLT 2009-2010 Ford F-350 Super Duty Cabela's 2008-2009 Ford F-350 Super Duty FX4 2005-2010 Ford F-350 Super Duty Harley-Davidson Edition 2005-2016 Ford F-350 Super Duty King Ranch 2005-2016 Ford F-350 Super Duty Lariat 2013-2016 Ford F-350 Super Duty Platinum 2005-2016 Ford F-350 Super Duty XL 2005-2016 Ford F-350 Super Duty XLT

For F-250 applications, a 4" block can be used in place of your factory 2" block, in turn leveling the truck from front to rear, allowing use of ICON Rear Shocks.Installation InstructionsInstallation InstructionsThis Part Fits: Year Make Model Submodel 2009-2010 Ford F-250 Super Duty Cabela's 2008-2009 Ford F-250 Super Duty FX4 2005-2010 Ford F-250 Super Duty Harley-Davidson Edition 2005-2016 Ford F-250 Super Duty King Ranch 2005-2016 Ford F-250 Super Duty Lariat 2013-2016 Ford F-250 Super Duty Platinum 2005-2016 Ford F-250 Super Duty XL 2005-2016 Ford F-250 Super Duty XLT 2009-2010 Ford F-350 Super Duty Cabela's 2008-2009 Ford F-350 Super Duty FX4 2005-2010 Ford F-350 Super Duty Harley-Davidson Edition 2005-2016 Ford F-350 Super Duty King Ranch 2005-2016 Ford F-350 Super Duty Lariat 2013-2016 Ford F-350 Super Duty Platinum 2005-2016 Ford F-350 Super Duty XL 2005-2016 Ford F-350 Super Duty XLT

For F-250 applications, a 4" block can be used in place of your factory 2" block, in turn leveling the truck from front to rear, allowing use of ICON Rear Shocks.Installation InstructionsInstallation InstructionsInstallation InstructionsThis Part Fits: Year Make Model Submodel 2009-2010 Ford F-250 Super Duty Cabela's 2008-2009 Ford F-250 Super Duty FX4 2005-2010 Ford F-250 Super Duty Harley-Davidson Edition 2005-2021 Ford F-250 Super Duty King Ranch 2005-2021 Ford F-250 Super Duty Lariat 2018-2021 Ford F-250 Super Duty Limited 2013-2021 Ford F-250 Super Duty Platinum 2005-2021 Ford F-250 Super Duty XL 2005-2021 Ford F-250 Super Duty XLT 2009-2010 Ford F-350 Super Duty Cabela's 2008-2009 Ford F-350 Super Duty FX4 2005-2010 Ford F-350 Super Duty Harley-Davidson Edition 2005-2021 Ford F-350 Super Duty King Ranch 2005-2021 Ford F-350 Super Duty Lariat 2018-2021 Ford F-350 Super Duty Limited 2013-2021 Ford F-350 Super Duty Platinum 2005-2021 Ford F-350 Super Duty XL 2005-2021 Ford F-350 Super Duty XLT

For F-250 applications, a 4" block can be used in place of your factory 2" block, in turn leveling the truck from front to rear, allowing use of ICON Rear Shocks.Installation InstructionsInstallation InstructionsInstallation InstructionsInstallation InstructionsInstallation InstructionsInstallation InstructionsThis Part Fits: Year Make Model Submodel 2009-2010 Ford F-250 Super Duty Cabela's 2008-2009 Ford F-250 Super Duty FX4 2005-2010 Ford F-250 Super Duty Harley-Davidson Edition 2005-2016 Ford F-250 Super Duty King Ranch 2005-2016 Ford F-250 Super Duty Lariat 2013-2016 Ford F-250 Super Duty Platinum 2005-2016 Ford F-250 Super Duty XL 2005-2016 Ford F-250 Super Duty XLT 2009-2010 Ford F-350 Super Duty Cabela's 2008-2009 Ford F-350 Super Duty FX4 2005-2010 Ford F-350 Super Duty Harley-Davidson Edition 2005-2016 Ford F-350 Super Duty King Ranch 2005-2016 Ford F-350 Super Duty Lariat 2013-2016 Ford F-350 Super Duty Platinum 2005-2016 Ford F-350 Super Duty XL 2005-2016 Ford F-350 Super Duty XLT

For F-250 applications, a 4" block can be used in place of your factory 2" block, in turn leveling the truck from front to rear, allowing use of ICON rear shocks.Installation InstructionsInstallation InstructionsInstallation InstructionsInstallation InstructionsInstallation InstructionsInstallation InstructionsInstallation InstructionsThis Part Fits: Year Make Model Submodel 2009-2010 Ford F-250 Super Duty Cabela's 2008-2009 Ford F-250 Super Duty FX4 2005-2010 Ford F-250 Super Duty Harley-Davidson Edition 2005-2016 Ford F-250 Super Duty King Ranch 2005-2016 Ford F-250 Super Duty Lariat 2013-2016 Ford F-250 Super Duty Platinum 2005-2016 Ford F-250 Super Duty XL 2005-2016 Ford F-250 Super Duty XLT 2009-2010 Ford F-350 Super Duty Cabela's 2008-2009 Ford F-350 Super Duty FX4 2005-2010 Ford F-350 Super Duty Harley-Davidson Edition 2005-2016 Ford F-350 Super Duty King Ranch 2005-2016 Ford F-350 Super Duty Lariat 2013-2016 Ford F-350 Super Duty Platinum 2005-2016 Ford F-350 Super Duty XL 2005-2016 Ford F-350 Super Duty XLT