Edelbrock part #2916 Super Victor BBC Tall-Deck intake manifold is designed for Chevy big-blocks with rectangular port cylinder heads. This single-plane manifold is ideal for 500+ cubic-inches or any big-block drag race engine with high air flow requirements. In dyno testing, Super Victor #2916 Tall-Deck outperformed the competition out-of-the-box with just a port match and minor blending of critical surfaces.Installation InstructionsWarranty

Edelbrock part #2925 Super Victor 23-degree intake manifold is designed for heads with a standard port location, the runners match the "flat floor" entry of the latest 23-degree heads. Carb pad height is 5-1/2" (from end seals) and overall, this intake is about one-inch taller than our Victor Jr. intake #2975. Runners have a 2.80 square-inch cross-section.Installation InstructionsWarrantyInstallation Instructions

Edelbrock part #2814 Super Victor Vortec Bowtie intake manifold is designed specifically for use with GM cast-iron Vortec Bowtie cylinder heads #25534351 (185cc) and #25534371 (215cc). It features raised runners that closely match the port shape and location of these heads and is the best choice for racing classes that prohibit modification to the manifold. It features the original 6-bolt pattern and 7/8" inch of additional carb pad height (compared to previous raised-runner manifolds such as #2926).

The Edelbrock Supercharger System part #15354 is designed for your 2012-14 6.4L HEMI Jeep Grand Cherokee SRT. The part #15354 kit made 471whp and 502wtq. Featuring a unique design with minimal components makes it possible to fit an Edelbrock supercharger under the stock hood. The core of each system is the Eaton Gen VI R2650 Supercharger rotating assembly with a four-lobe design with 170 degrees of twist for maximum flow, minimum temperature rise and quiet operation for excellent drivability. This supercharger features our DUAL PASS, 3 CORE (DP-3C) intercooler system. We also designed our superchargers with an integrated bypass valve to help eliminate parasitic loss under light throttle, improving mileage potential. Our unique and efficient inlet configuration results in a shorter, less restrictive intake path for improved airflow, without the need for a jack-shaft. Keeping the air cool is a high-capacity air-to-water intercooler and low-temp heat exchanger. For safety, the Edelbrock-supplied program will retain the factory vehicle speed limiter setting.Material Safety Data SheetInstallation InstructionsThis Part Fits: Year Make Model Submodel 2014 Jeep Grand Cherokee SRT 2012-2013 Jeep Grand Cherokee SRT8

The Edelbrock Stage II Upgrade Kit part #15882 allows customers using the 1588/15880 supercharger (2011-14 5.0L Mustang) to upgrade to stage 2. The Edelbrock Stage II Upgrade Kit part #15882 includes a 3.25in. supercharger pulley, complete competition air intake system, Gatorback belt, and an updated calibration file. This upgrade is intended for racing applications only and is not legal for use on pollution-controlled vehicles. A properly completed race-only form will need to be signed and submitted by the customer and accepted by Edelbrock to receive the race-only calibration file. A race-only calibration file will need to be modified by the customer for the specific race engine configuration.Installation InstructionsMaterial Safety Data SheetThis Part Fits: Year Make Model Submodel 2012-2013 Ford Mustang Boss 302 2011-2014 Ford Mustang GT

Transform your mild-mannered V6-powered 2016-19 Camaro into a true street sleeper with an Edelbrock supercharger under the hood! If you love the light, evenly balanced weight of your V6 Camaro but are underwhelmed by the smaller six-cylinder engine's power, the Edelbrock supercharger Kit W/O TUNER #159950 will deliver the best of both worlds with 376 horsepower and 319 ft-lbs of torque at the rear wheel, all from a 50-state emissions-legal bolt-on kit. The increase in horsepower and torque comes with little to no loss in fuel economy thanks to an integrated bypass valve. Features include an Eaton TVS R1740 rotor assembly with an integrated air-to-water intercooler core and front-mount heat exchanger for low inlet air temperature and increased power potential. The Edelbrock supercharger for the Gen 2 HFV6-powered Camaro is designed to fit under the stock hood with no cutting or modifications and is backed by our industry-leading 3-year/36,000-mile powertrain warranty when applicable. Comes finished with a durable black powder-coating that blends nicely into the Camaro engine compartment. Supercharger System #159950 is designed and manufactured in the USA.Material Safety Data SheetInstallation InstructionsThis Part Fits: Year Make Model Submodel 2017-2019 Chevrolet Camaro LS 2016-2019 Chevrolet Camaro LT 2016-2019 Chevrolet Camaro SS 2017-2019 Chevrolet Camaro ZL1

Owners of 2018-2020 Ford Mustangs who have installed an Edelbrock #15832/158320 Stage I Supercharger Kit can now step up to the next level of performance with the Stage II Supercharger System Upgrade Kit #15883. With this Stage II upgrade kit, your vehicle remains emissions-legal in all 50-states while taking full advantage of the improved Gen 3 DI/PI Coyote engine. The Edelbrock Stage II Supercharger Upgrade Kit features all of the vital components required to support the additional horsepower increase that makes this our highest rated horsepower system. Included are a 103mm Throttle Body to replace the Stage I 80mm, a high-flow air intake system, a 113mm Mass Airflow Sensor Kit with injection-molded housing, larger 50 lb/hr direct-port fuel injectors along with a Fuel Pump Voltage Regulator, and an 8-rib belt drive to minimize slippage and maintain consistent boost pressure under full throttle.Material Safety Data SheetInstallation InstructionsThis Part Fits: Year Make Model Submodel 2019-2020 Ford Mustang Bullitt 2018-2020 Ford Mustang GT 2018-2020 Ford Mustang GT Premium 2018-2019 Ford Mustang Shelby GT350 2018-2019 Ford Mustang Shelby GT350R

The Edelbrock Supercharger System part #15356 is designed for your 2015 6.4L HEMI Jeep Grand Cherokee SRT. The part #15356 kit makes an excellent amount of horsepower and torque. Featuring a unique design with minimal components makes it possible to fit an Edelbrock supercharger under the stock hood. The core of each system is the Eaton Gen VI R2650 Supercharger rotating assembly with a four-lobe design with 170 degrees of twist for maximum flow, minimum temperature rise and quiet operation for excellent drivability. This supercharger features our DUAL PASS, 3 CORE (DP-3C) intercooler system. We also designed our superchargers with an integrated bypass valve to help eliminate parasitic loss under light throttle, improving mileage potential. Our unique and efficient inlet configuration results in a shorter, less restrictive intake path for improved airflow, without the need for a jack-shaft. Keeping the air cool is a high-capacity air-to-water intercooler and low-temp heat exchanger. For safety, the Edelbrock-supplied program will retain the factory vehicle speed limiter setting.Material Safety Data SheetInstallation InstructionsThis Part Fits: Year Make Model Submodel 2015 Jeep Grand Cherokee SRT

Are you ready to add serious horsepower under the hood of your 2018-21 Ford Mustang GT? The Edelbrock Supercharger Kit #15832 is a 50-state emissions-legal system that is dyno-proven to produce 623 horsepower and 510 ft-lbs of torque to the rear wheels with no other modifications required! That means no cutting to stock body or hood so your car retains the stock hood and cowl. At the heart of this system is Eaton's biggest R2650 TVS rotor assembly housed in a new manifold with an integrated high-capacity DP3C (dual-pass, three-core) air-to-water intercooler for lower inlet air temperatures and increased power potential. The 170-degree high-twist lobes, bigger bearings and beefier timing gears ensure maximum reliability with smooth acceleration throughout the powerband. The Edelbrock Supercharger for the 5.0L V8 fits under the stock hood with absolutely no cutting or modifications required. And if you're concerned about the effect on MPG, the increase in power comes with little to no loss in fuel economy thanks to the supercharger's integrated bypass valve that mitigates parasitic power loss during normal driving. Our new kit is a true bolt-on that requires no additional modifications to the stock engine. For those who want more power, we've got an Edelbrock Stage 2 Upgrade Kit that can be added to transform your Mustang into a track-ready beast! This Edelbrock Supercharger has a self-contained lubrication system with a 100,000-mile service interval and comes finished in a durable black powder-coating that blends nicely into the engine compartment. Each kit includes a complete set of preformed hoses, hardware and a full-color manual that provides clear step-by-step instructions for ease of installation. This system is designed and manufactured in the USA and is covered by our industry-leading 3-year/36,000-mile warranty.Material Safety Data SheetInstallation InstructionsThis Part Fits: Year Make Model Submodel 2019-2020 Ford Mustang Bullitt 2018-2020 Ford Mustang GT 2018-2020 Ford Mustang GT Premium

Edelbrock Hardware Kit part #15905 includes all parts necessary to install a #1590 or #1591 Edelbrock Supercharger System on a 2010-2013 Corvette equipped with the Grand Sport trim package and a manual transmission. These vehicles have the dry sump oiling system found on the LS7 equipped Z06 Corvette.Installation InstructionsThis Part Fits: Year Make Model Submodel 2010-2013 Chevrolet Corvette Base 2010-2013 Chevrolet Corvette Grand Sport 2010-2013 Chevrolet Corvette ZR1

The Edelbrock Pro Tuner Supercharger System #15899 is designed for a large group of model-years that include the 2015-20 Ford Mustang GT, GT350 and Bullitt edition Mustangs. This special kit is intended for competition applications and features the modular supercharger inlet that allows the use of larger throttle bodies. Included is Edelbrock's high-flow Competition Air Intake System with reusable filter element and 113mm MAF housing, a 6-rib belt drive system, and all vehicle-specific installation components. Items that are not included in this system are the supercharger pulley (6- and 8-rib options are sold separately), the supercharger belt, fuel pump and injectors, spark plugs, and coil covers (#41149 sold separately). An optional 8-rib belt drive assembly for high-horsepower engines is available under part number 15879. Use of this system on 2015-17 Mustang GT and 2016-19 GT350 models requires the Edelbrock 103mm Throttle Body #38988, sold separately. Use on 2018-20 Mustang GT and Bullitt models will require Edelbrock 103mm Throttle Body #38989, also sold separately. The Pro Tuner Supercharger System #15899 is capable of delivering horsepower output well over the 1,000 mark with the appropriate supporting modifications and custom tuning (not provided by Edelbrock).Material Safety Data SheetInstallation InstructionsThis Part Fits: Year Make Model Submodel 2015-2019 Ford F-150 King Ranch 2015-2019 Ford F-150 Lariat 2015-2019 Ford F-150 Platinum 2016-2019 Ford F-150 SSV 2015-2019 Ford F-150 XL 2015-2019 Ford F-150 XLT 2019-2020 Ford Mustang Bullitt 2015-2020 Ford Mustang EcoBoost 2015-2020 Ford Mustang EcoBoost Premium 2015-2020 Ford Mustang GT 2015 Ford Mustang GT 50 Years Limited Edition 2015-2020 Ford Mustang GT Premium 2015-2020 Ford Mustang Shelby GT350 2015-2020 Ford Mustang Shelby GT350R 2020 Ford Mustang Shelby GT500 2015-2017 Ford Mustang V6

Edelbrock Supercharger System #15665 is a bolt-on forced induction kit that features significant improvements for 2019-2021 Chevrolet/GMC 1500-series trucks with the 5.3L V8 engine. This kit is emissions-legal in all 50 states and provides a 60% increase in horsepower to 485 RWHP with a 57% increase in torque to 466 ft-lbs at the rear wheels when used with the supplied calibration and 4.00-inch pulley on 93-octane pump gas. An Edelbrock Supercharger is the perfect power adder whether you plan to tow a boat, haul heavier loads, or you just want to feel your truck come to life without sacrificing daily drivability. Edelbrock Supercharger Kit #15665 for Chevy/GMC trucks features a redesigned lid with more clearance under the cowl for easier installation and a restyled badge lets people know that your system is Made in the USA by Edelbrock. Installation of the Edelbrock Supercharger requires no cutting or modifications and fits neatly under the stock hood. If you're concerned about the effect on MPG, the increase in power comes with little to no loss in fuel economy during normal driving thanks to the system's integrated bypass valve that mitigates parasitic power loss. This is a true bolt-on kit that requires no additional modifications to the stock 5.3L engine. The Edelbrock Supercharger features a self-contained lubrication system with a 100,000-mile service interval and a patented high-capacity Dual-Pass 3-Core (DP3C) intercooler. The durable black powder-coating blends nicely with the engine and results in an attractive underhood presentation that looks like the factory put it there. Each kit includes a complete set of preformed hoses, hardware and a full-color manual that provides clear step-by-step instructions for ease of installation. Unlocking of the factory PCM is included in this kit. Covered by Edelbrock's industry-leading 3-year/36,000-mile powertrain warranty.This Part Fits: Year Make Model Submodel 2019-2021 Chevrolet Silverado 1500 Custom 2019-2021 Chevrolet Silverado 1500 Custom Trail Boss 2019-2021 Chevrolet Silverado 1500 High Country 2019-2021 Chevrolet Silverado 1500 LT 2019-2021 Chevrolet Silverado 1500 LT Trail Boss 2019-2021 Chevrolet Silverado 1500 LTZ 2019-2021 Chevrolet Silverado 1500 RST 2019-2021 Chevrolet Silverado 1500 SSV 2019-2021 Chevrolet Silverado 1500 WT 2019 Chevrolet Silverado 1500 LD Custom 2019 Chevrolet Silverado 1500 LD LT 2019 Chevrolet Silverado 1500 LD WT 2019-2021 GMC Sierra 1500 AT4 2019-2021 GMC Sierra 1500 Base 2019-2021 GMC Sierra 1500 Denali 2019-2021 GMC Sierra 1500 Elevation 2019-2021 GMC Sierra 1500 SLE 2019-2021 GMC Sierra 1500 SLT 2019 GMC Sierra 1500 Limited Base 2019 GMC Sierra 1500 Limited SLE

The Edelbrock Supercharger System part #1538 is designed for your 2009-14 5.7L HEMI Dodge Ram Truck and produces 439 RWHP and 444 RWTQ. The core of each system is the Eaton Gen VI 2300 Supercharger rotating assembly with a four-lobe design with 160 degrees of twist for maximum flow, minimum temperature rise and quiet operation for excellent drivability. We also designed our superchargers with an integrated bypass valve to help eliminate parasitic loss under light throttle, improving mileage potential. Our unique and efficient inlet configuration results in a shorter, less restrictive intake path for improved airflow, without the need for a jack-shaft. Keeping the air cool is a high-capacity air-to-water intercooler and low-temp heat exchanger.Installation InstructionsMaterial Safety Data SheetInstallation InstructionsThis Part Fits: Year Make Model Submodel 2009-2010 Dodge Ram 1500 Laramie 2009-2010 Dodge Ram 1500 SLT 2009-2010 Dodge Ram 1500 Sport 2009-2010 Dodge Ram 1500 ST 2009-2010 Dodge Ram 1500 TRX 2009-2010 Dodge Ram 1500 TRX4 2011-2014 Ram 1500 Big Horn 2012-2014 Ram 1500 Express 2014 Ram 1500 HFE 2011-2014 Ram 1500 Laramie 2014 Ram 1500 Laramie Limited 2011-2014 Ram 1500 Laramie Longhorn 2014 Ram 1500 Lone Star 2011-2014 Ram 1500 Outdoorsman 2013 Ram 1500 R/T 2011-2014 Ram 1500 SLT 2014 Ram 1500 Special Service 2011-2014 Ram 1500 Sport 2011-2012 Ram 1500 ST 2011-2014 Ram 1500 Tradesman 2012 Ram 1500 Tradesman HD

This new addition to our expanding line of CARB-compliant supercharger systems is highlighted by significant improvements for 2014-2018 Chevy and GMC trucks/SUVs equipped with the Gen V 5.3L V8 engine. This is a true bolt-on performance kit that is emissions legal in all 50 states and produces an impressive 482 horsepower with 452 ft-lbs of torque at the rear wheel on 93-octane pump gas! Edelbrock supercharger Kit #15663 for Silverado; Sierra; Suburban; Tahoe and Yukon models equipped with the Gen V 5.3L V8 engine is a complete redesign of our previous kit featuring a manifold that now houses Eaton?s R2650 TVS rotor assembly along with a high-capacity Dual Pass 3-core intercooler system. The new rotors have a 170-degree high-twist lobe design with bigger bearings and beefier timing gears for unparalleled efficiency and OEM-like reliability. Like other superchargers in the Edelbrock line; this system is designed to fit under the stock hood with no cutting or modifications required. A self-contained oiling system keeps maintenance to a minimum with a service interval of 100;000 miles. The significant increase in horsepower and torque comes with minimal loss in fuel economy thanks to the system?s integrated bypass valve that mitigates parasitic power loss during normal driving conditions. Our new Edelbrock supercharger kit requires no internal modification to the engine. For higher power demands; the R2650 supercharger can support 1;000-plus horsepower at the flywheel with the right combination of parts. This kit includes everything required for a complete installation including a set of preformed hoses to simplify the process. Installers will appreciate the full-color manual that provides clear step-by-step instructions. Comes finished in a durable black powder-coating that blends nicely into the engine compartment. All Edelbrock Supercharger Systems are designed and manufactured in the USA and are covered by our 3-year/36;000-mile powertrain warranty when applicable.Material Safety Data SheetInstallation InstructionsThis Part Fits: Year Make Model Submodel 2016-2018 Chevrolet Silverado 1500 Custom 2014-2018 Chevrolet Silverado 1500 High Country 2015-2018 Chevrolet Silverado 1500 LS 2014-2018 Chevrolet Silverado 1500 LT 2014-2018 Chevrolet Silverado 1500 LTZ 2015-2018 Chevrolet Silverado 1500 SSV 2014-2018 Chevrolet Silverado 1500 WT 2015-2018 Chevrolet Suburban LS 2015-2018 Chevrolet Suburban LT 2015-2016 Chevrolet Suburban LTZ 2017-2018 Chevrolet Suburban Premier 2014 Chevrolet Suburban 1500 LS 2014 Chevrolet Suburban 1500 LT 2014 Chevrolet Suburban 1500 LTZ 2017 Chevrolet Tahoe LS 2017 Chevrolet Tahoe LT 2017 Chevrolet Tahoe PPV 2017 Chevrolet Tahoe Premier 2017 Chevrolet Tahoe SSV 2014-2018 GMC Sierra 1500 Base 2014-2018 GMC Sierra 1500 Denali 2014-2018 GMC Sierra 1500 SLE 2014-2018 GMC Sierra 1500 SLT 2017 GMC Yukon SLE 2017 GMC Yukon SLT 2017 GMC Yukon XL SLE 2017 GMC Yukon XL SLT

Joining Edelbrock's expanding line of supercharger systems are the Chevrolet & GMC 2015-2020 SUVs, 2014-2018 full size trucks, & 2019 Silverado LD & Sierra LDT (air box on right side) equipped with a Gen V 5.3L L83 engine (not a L8B hybrid). This is a true bolt-on performance kit that is emissions legal in all 50 states and produces an impressive 482 horsepower with 452 ft-lbs of torque at the rear wheel on 93-octane pump gas! Edelbrock supercharger Kit #156630 for Silverado, Sierra, Suburban, Tahoe and Yukon models equipped with a Gen V 5.3L V8 engine is a complete redesign of the previous kit featuring a manifold that now houses Eaton's R2650 TVS rotor assembly along with a high-capacity Dual Pass 3-core intercooler system. The new rotors have a 170-degree high-twist lobe design with bigger bearings and beefier timing gears for unparalleled efficiency and OEM-like reliability. Like other superchargers in the Edelbrock line, this system is designed to fit under the stock hood with no cutting or modifications required. A self-contained oiling system keeps maintenance to a minimum with a service interval of 100,000 miles. The significant increase in horsepower and torque comes with minimal loss in fuel economy thanks to the system's integrated bypass valve that mitigates parasitic power loss during normal driving conditions. This new Edelbrock supercharger kit requires no internal modifications to the engine. For higher power demands, the R2650 supercharger can support 1,000-plus horsepower at the flywheel with the right combination of parts. This kit includes everything required for a complete installation including a set of preformed hoses to simplify the process. A full-color manual provides clear step-by-step instructions for the installer. Comes finished in a durable black powder-coating that blends nicely into the engine compartment. All Edelbrock Supercharger Systems are designed and manufactured in the USA and are covered by a 3-year/36,000-mile warranty.Material Safety Data SheetInstallation InstructionsThis Part Fits: Year Make Model Submodel 2016-2018 Chevrolet Silverado 1500 Custom 2014-2018 Chevrolet Silverado 1500 High Country 2015-2018 Chevrolet Silverado 1500 LS 2014-2018 Chevrolet Silverado 1500 LT 2014-2018 Chevrolet Silverado 1500 LTZ 2015-2018 Chevrolet Silverado 1500 SSV 2014-2018 Chevrolet Silverado 1500 WT 2015-2018 Chevrolet Suburban LS 2015-2018 Chevrolet Suburban LT 2015-2016 Chevrolet Suburban LTZ 2017-2018 Chevrolet Suburban Premier 2014 Chevrolet Suburban 1500 LS 2014 Chevrolet Suburban 1500 LT 2014 Chevrolet Suburban 1500 LTZ 2017 Chevrolet Tahoe LS 2017 Chevrolet Tahoe LT 2017 Chevrolet Tahoe PPV 2017 Chevrolet Tahoe Premier 2017 Chevrolet Tahoe SSV 2014-2018 GMC Sierra 1500 Base 2014-2018 GMC Sierra 1500 Denali 2014-2018 GMC Sierra 1500 SLE 2014-2018 GMC Sierra 1500 SLT 2017 GMC Yukon SLE 2017 GMC Yukon SLT 2017 GMC Yukon XL SLE 2017 GMC Yukon XL SLT

The Edelbrock Pro Tuner Supercharger Kit W/O Tuner #155923 is an upgrade intended for the 2016-21 Chevrolet Camaro ZL1 and Cadillac CTS-V equipped with the direct-injected Gen 5 LT4 V-8 engine. This kit is recommended for competition applications only and includes the R2650 TVS head unit only. It does not include all necessary parts for installation. The Pro Tuner Supercharger Kit #155923 is capable of delivering horsepower output well over the 1,000 mark with the appropriate supporting modifications, fuel system upgrades and custom tuning (not provided by Edelbrock). Note: Installation of this kit on a Camaro ZL1 will require hood modification in order for the supercharger to clear, and installation on the CTS-V will require modification to the strut tower brace to fit.Material Safety Data SheetInstallation InstructionsThis Part Fits: Year Make Model Submodel 2016-2019 Cadillac CTS Base 2016-2019 Cadillac CTS Luxury 2016 Cadillac CTS Performance 2016 Cadillac CTS Premium 2017-2019 Cadillac CTS Premium Luxury 2016-2019 Cadillac CTS V 2016-2019 Cadillac CTS Vsport 2016 Cadillac CTS Vsport Premium 2017-2019 Cadillac CTS Vsport Premium Luxury 2017-2019 Chevrolet Camaro LS 2017-2019 Chevrolet Camaro LT 2017-2019 Chevrolet Camaro SS 2017-2021 Chevrolet Camaro ZL1

The performance-proven Edelbrock modular-inlet supercharger system is now available for owners of 2015-2017 Ford Mustangs with the 5.0L Coyote engine. Our new Edelbrock supercharger #15838 is a complete bolt-on kit that produces an impressive 690 horsepower with 588 ft-lbs of torque. At the heart of this system is Eaton?s biggest R2650 TVS rotor assembly housed in a new manifold with an integrated high-capacity DP3C (dual-pass; three-core) air-to-water intercooler for lower inlet air temperatures and increased power potential. The 170-degree high-twist lobes; bigger bearings and beefier timing gears ensure maximum reliability with smooth acceleration throughout the powerband. The Edelbrock supercharger for the 5.0L V8 fits under the stock hood with absolutely no cutting or modifications required. And if you?re concerned about the effect on MPG; the increase in power comes with little to no loss in fuel economy thanks to the supercharger?s integrated bypass valve that mitigates parasitic power loss during normal driving. Our new kit is a true bolt-on that requires no additional modifications to the stock engine. For those who want more power; we?ve got an Edelbrock Stage 2 Upgrade Kit #15884 that can be added to transform your Mustang into a track-ready beast! The Edelbrock supercharger for the 2015-17 Mustang has a self-contained lubrication system with a 100;000-mile service interval and comes finished in a durable black powder-coating that blends nicely into the engine compartment. Each kit includes a complete set of preformed hoses; hardware and a full-color manual that provides clear step-by-step instructions for ease of installation. This system is designed and manufactured in the USA and is covered by our industry-leading 3-year/36;000-mile warranty.Material Safety Data SheetInstallation InstructionsThis Part Fits: Year Make Model Submodel 2015-2017 Ford F-150 King Ranch 2015-2017 Ford F-150 Lariat 2015-2017 Ford F-150 Platinum 2016-2017 Ford F-150 SSV 2015-2017 Ford F-150 XL 2015-2017 Ford F-150 XLT 2015-2017 Ford Mustang GT 2015 Ford Mustang GT 50 Years Limited Edition 2015-2017 Ford Mustang GT Premium

The performance-proven Edelbrock modular-inlet supercharger is now available for owners of 2015-2017 Ford Mustangs with the 5.0L Coyote engine. Our new Edelbrock Supercharger System W/O Tuner #158380 is a bolt-on kit that produces an impressive 690 horsepower with 588 ft-lbs of torque. At the heart of this system is Eaton?s biggest R2650 TVS rotor assembly housed in a new manifold with an integrated high-capacity DP3C (dual-pass; three-core) air-to-water intercooler for lower inlet air temperatures and increased power potential. The 170-degree high-twist lobes; bigger bearings and beefier timing gears ensure maximum reliability with smooth acceleration throughout the powerband. The Edelbrock supercharger for the 5.0L V8 fits under the stock hood with absolutely no cutting or modifications required. And if you?re concerned about the effect on MPG; the increase in power comes with little to no loss in fuel economy thanks to the supercharger?s integrated bypass valve that mitigates parasitic power loss during normal driving. Our new kit is a true bolt-on that requires no additional modifications to the stock engine. For those who want more power; we?ve got an Edelbrock Stage 2 Upgrade Kit #15884 that can be added to transform your Mustang into a track-ready beast! The Edelbrock supercharger for the 2015-17 Mustang has a self-contained lubrication system with a 100;000-mile service interval and comes finished in a durable black powder-coating that blends nicely into the engine compartment. Each kit includes a complete set of preformed hoses; hardware and a full-color manual that provides clear step-by-step instructions for ease of installation (Note: Kit #158380 does not include the handheld tuner). This system is designed and manufactured in the USA and is covered by our industry-leading 3-year/36;000-mile warranty.Material Safety Data SheetInstallation InstructionsThis Part Fits: Year Make Model Submodel 2015-2017 Ford F-150 King Ranch 2015-2017 Ford F-150 Lariat 2015-2017 Ford F-150 Platinum 2016-2017 Ford F-150 SSV 2015-2017 Ford F-150 XL 2015-2017 Ford F-150 XLT 2015-2017 Ford Mustang GT 2015 Ford Mustang GT 50 Years Limited Edition 2015-2017 Ford Mustang GT Premium

The Edelbrock Supercharger System part #153560 is designed for your 2012-2018 6.4L HEMI Jeep Grand Cherokee SRT/SRT8. The part #153560 kit makes an excellent amount of horsepower and torque and gives you the ability to get the custom tune you desire. Featuring a unique design with minimal components makes it possible to fit an Edelbrock supercharger under the stock hood. The core of each system is the Eaton Gen VI R2650 Supercharger rotating assembly with a four-lobe design with 170 degrees of twist for maximum flow, minimum temperature rise and quiet operation for excellent drivability. This supercharger features our DUAL PASS, 3 CORE (DP-3C) intercooler system. We also designed our superchargers with an integrated bypass valve to help eliminate parasitic loss under light throttle, improving mileage potential. Our unique and efficient inlet configuration results in a shorter, less restrictive intake path for improved airflow, without the need for a jack-shaft. Keeping the air cool is a high-capacity air-to-water intercooler and low-temp heat exchanger. For safety, the Edelbrock-supplied program will retain the factory vehicle speed limiter setting. This unit is NOT supplied with a programmer. Supercharger systems without tuners are not eligible for supplemental warranty. Supercharger systems sold without tuners are only emissions legal when used with the correct Edelbrock program.Material Safety Data SheetInstallation InstructionsThis Part Fits: Year Make Model Submodel 2012-2013 Jeep Grand Cherokee SRT8

The Edelbrock Stage 1 Street Supercharger System part #1556 for 2012-19 Scion FR-S, BRZ, or Toyota GT86 increases the performance of your 2.0L engine to 242 horsepower and 186 ft-lbs of torque at the rear wheels. This Edelbrock Supercharger System is designed exclusively for the FA20/4U-GSE engine. Its unique inverted design utilizes the Eaton 1320 TVS rotor assembly for maximum efficiency in a compact package. This system features an efficient high flow inlet configuration that results in a shorter, less restrictive intake path for improved airflow and performance. An air-to-water intercooler and front mount heat exchanger deliver a cool, dense air charge resulting in dramatically improved performance, especially in the mid-range, where power dips have been eliminated for a smooth linear power curve. The supercharger assembly is finished with a durable black powder coating with red accents for a unique look that will let everybody know your car is Edelbrock supercharged! The Edelbrock #1556 system is 50-state emissions legal. The supplied tune is intended for completely stock vehicles with the exception of a cat-back exhaust.Installation InstructionsMaterial Safety Data SheetThis Part Fits: Year Make Model Submodel 2013-2016 Scion FR-S Base 2013-2017 Subaru BRZ Limited 2013-2017 Subaru BRZ Premium 2015 Subaru BRZ Series.Blue 2016 Subaru BRZ Series.HyperBlue 2017 Subaru BRZ Series.Yellow 2017 Toyota 86 Base 2017 Toyota 86 Special Edition

The Edelbrock Stage 1 Street Supercharger System part #15560 (No Tuner) for 2012-19 Scion FR-S, BRZ, or Toyota GT86 increases the performance of your 2.0L engine to 242 horsepower and 186 ft-lbs of torque at the rear wheels. This Edelbrock Supercharger System is designed exclusively for the FA20/4U-GSE engine. It's unique inverted design allows for maximum flow, while retaining great daily driving characteristics. It has been designed from the ground-up and utilizes the Eaton 1320 TVS rotor assembly for maximum efficiency in a compact package. As with all Edelbrock superchargers, this system features an efficient high flow inlet configuration that results in a shorter, less restrictive intake path for improved airflow and performance. To cool the incoming air, is a large air-to-water intercooler and heat exchanger. All of these features help the Edelbrock deliver dramatically improved performance, especially in the mid-range, where power dips have been eliminated for a smooth linear power curve. Lastly, the supercharger assembly is finished with a durable black powder coating with red accents for a unique look that will let everybody know your car is Edelbrock powered. Supercharger systems sold without tuners are only emissions legal when used with the correct Edelbrock program.Installation InstructionsMaterial Safety Data SheetThis Part Fits: Year Make Model Submodel 2013-2016 Scion FR-S Base 2013-2018 Subaru BRZ Limited 2013-2018 Subaru BRZ Premium 2015 Subaru BRZ Series.Blue 2016 Subaru BRZ Series.HyperBlue 2017 Subaru BRZ Series.Yellow 2018 Subaru BRZ TS 2017-2018 Toyota 86 Base 2018 Toyota 86 GT 2017 Toyota 86 Special Edition

The Edelbrock Supercharger System part #15172 is designed for use with 2015-18 Dodge Charger and Challenger 6.4L cars. It delivers 572 horsepower and 531 ft-lbs of torque at the rear wheels. Featuring a unique design with minimal components makes it possible to fit an Edelbrock supercharger under the stock hood. The core of this system is the Eaton Gen VI R2650 TVS rotating assembly with a four-lobe design with 170 degrees of twist for maximum flow, minimum temperature rise and quiet operation for excellent drivability. We also designed our superchargers with an integrated bypass valve to help eliminate parasitic loss under light throttle, improving mileage potential. Our unique and efficient inlet configuration results in a shorter, less restrictive intake path for improved airflow, without the need for a jack-shaft. Keeping the air cool is a high-capacity air-to-water intercooler and low-temp heat exchanger. ALL 2015-Later Chrysler/Dodge Supercharger Systems will require the ECM to be sent in for modification.. HANDHELD PROGRAMMER NOT INCLUDED. This is an 8-10 day process/waiting period from the time they are received! Every step of the process is handled with next day shipping. Supercharger systems without tuners are not eligible for supplemental warranty. Supercharger systems sold without tuners are only emissions legal when used with the correct Edelbrock program.Material Safety Data SheetInstallation InstructionsThis Part Fits: Year Make Model Submodel 2016 Dodge Challenger 392 Hemi Scat Pack Shaker 2017-2018 Dodge Challenger R/T 392 2016-2018 Dodge Challenger R/T Scat Pack 2015 Dodge Challenger Scat Pack 2015-2018 Dodge Challenger SRT 392 2017-2018 Dodge Challenger T/A 392 2017-2018 Dodge Charger Daytona 392 2017-2018 Dodge Charger R/T 392 2015-2018 Dodge Charger R/T Scat Pack 2015-2018 Dodge Charger SRT 392

The Edelbrock Supercharger System part #15175 for 2015-18 Dodge RAM trucks equipped with a 5.7 HEMI V8 engine delivers 439 RWHP and 444 RWTQ. Featuring a unique design with minimal components makes it possible to fit an Edelbrock supercharger under the stock hood. The core of each system is the Eaton Gen VI 2300 TVS rotating assembly with a four-lobe design with 160 degrees of twist for maximum flow, minimum temperature rise and quiet operation for excellent drivability. We also designed our superchargers with an integrated bypass valve to help eliminate parasitic loss under light throttle, improving mileage potential. Our unique and efficient inlet configuration results in a shorter, less restrictive intake path for improved airflow, without the need for a jack-shaft. Keeping the air cool is a high-capacity air-to-water intercooler and low-temp heat exchanger. ALL 2015-Later Chrysler/Dodge Supercharger Systems will require the ECM to be sent in for modification.. HANDHELD PROGRAMMER NOT INCLUDED. This is an 8-10 day process/waiting period from the time they are received! Every step of the process is handled with next day shipping. Supercharger systems without tuners are not eligible for supplemental warranty. Supercharger systems sold without tuners are only emissions legal when used with the correct Edelbrock program.Material Safety Data SheetInstallation InstructionsThis Part Fits: Year Make Model Submodel 2009-2010 Dodge Ram 1500 Laramie 2009-2010 Dodge Ram 1500 SLT 2009-2010 Dodge Ram 1500 Sport 2009-2010 Dodge Ram 1500 ST 2009-2010 Dodge Ram 1500 TRX 2009-2010 Dodge Ram 1500 TRX4 2011-2012,2015-2018 Ram 1500 Big Horn 2015-2018 Ram 1500 Express 2011-2012,2015-2018 Ram 1500 Laramie 2015 Ram 1500 Laramie Limited 2011-2012,2015-2018 Ram 1500 Laramie Longhorn 2015-2018 Ram 1500 Limited 2015-2018 Ram 1500 Lone Star 2011-2012,2015-2016 Ram 1500 Outdoorsman 2015-2018 Ram 1500 Rebel 2011-2012,2015-2018 Ram 1500 SLT 2015-2018 Ram 1500 Special Service 2011-2012,2015-2018 Ram 1500 Sport 2011-2012 Ram 1500 ST 2011-2012,2015-2018 Ram 1500 Tradesman 2012 Ram 1500 Tradesman HD

If you?re the owner of a 2016-18 Chevy Camaro SS in search of bolt-on horsepower; our new Edelbrock Supercharger System W/O TUNER #155950 is a 50-state emissions-legal power adder designed for use with the 6.2L LT1 engine. This Stage 1 system features an Edelbrock manifold that houses Eaton?s biggest R2650 TVS rotor assembly with 170-degree high-twist lobes; bigger bearings and beefier timing gears for unparalleled efficiency and reliability. This is a true bolt-on supercharger kit that requires no additional modifications to the stock 6.2L engine and fits under the Camaro hood with no cutting or modification. With a dyno-tested output of 609 horsepower and 587 ft-lbs of torque; the increase in power comes with little to no loss in fuel economy thanks to our supercharger?s integrated bypass valve that mitigates parasitic power loss during normal driving. For those who want more power; the R2650 supercharger can support more than 1;000 horsepower at the flywheel with the right combination of parts. The Edelbrock supercharger for the Camaro has a self-contained lubrication system with a 100;000-mile service interval; a high-capacity Dual-Pass 3-Core (DP3C) integrated intercooler and comes finished in a durable black powder-coating. Each kit includes a complete set of preformed hoses; hardware and a full-color manual that provides step-by-step instructions for ease of installation (Note: Kit #155950 does not include the handheld tuner). This system is designed and manufactured in the USA and is covered by our industry-leading 3-year/36;000-mile warranty.Installation InstructionsMaterial Safety Data SheetThis Part Fits: Year Make Model Submodel 2016-2021 Chevrolet Camaro SS 2017 Chevrolet Camaro ZL1

The Edelbrock supercharger Stage 1 Street system part #1577 is for 2003-06 Silverado and Sierra 1500 and 2007 Sierra Classic vehicles. This supercharger system works with the 6.0L, 4.8L and 5.3L Gen III engines and increases the performance of the 6.0L engine to 348 horsepower and 381 ft-lbs at the rear wheels, 4.8L engine to 339 horsepower and 359 ft-lbs of torque at the rear wheels and the 5.3L engine to 345 horsepower and 381 ft-lbs of torque at the rear wheels. The core of this system is the Eaton Gen VI 2300 TVS rotating assembly with a four-lobe design with 160 degrees of twist for maximum flow, minimum temperature rise and quiet operation for excellent drivability. We also designed our superchargers with an integrated bypass valve to help eliminate parasitic loss under light throttle, improving mileage potential. Our unique and efficient inlet configuration results in a shorter, less restrictive intake path for improved airflow, without the need for a jack-shaft. Keeping the air cool is a high-capacity air-to-water intercooler and low-temp heat exchanger. The Edelbrock #1577 system is 50-state emissions legal. The supplied tune is intended for completely stock vehicles with the exception of a cat-back exhaust.Installation InstructionsInstallation InstructionsInstallation InstructionsMaterial Safety Data SheetInstallation InstructionsThis Part Fits: Year Make Model Submodel 2003-2005 Chevrolet Avalanche 1500 Base 2005-2006 Chevrolet Avalanche 1500 LS 2005-2006 Chevrolet Avalanche 1500 LT 2003 Chevrolet Avalanche 1500 North Face 2003 Chevrolet Avalanche 1500 On Road Edition 2003 Chevrolet Avalanche 1500 WBH 2004-2006 Chevrolet Avalanche 1500 Z66 2003-2006 Chevrolet Avalanche 1500 Z71 2003-2005 Chevrolet Silverado 1500 Base 2004-2006 Chevrolet Silverado 1500 Hybrid 2003-2006 Chevrolet Silverado 1500 LS 2003-2006 Chevrolet Silverado 1500 LT 2003-2006 Chevrolet Silverado 1500 SS 2003-2006 Chevrolet Silverado 1500 WT 2004-2005 Chevrolet Silverado 1500 Z71 Off-Road 2007 Chevrolet Silverado 1500 Classic Hybrid 2007 Chevrolet Silverado 1500 Classic LS 2007 Chevrolet Silverado 1500 Classic LT 2007 Chevrolet Silverado 1500 Classic SS 2007 Chevrolet Silverado 1500 Classic WT 2005 Chevrolet Silverado 1500 HD Base 2003,2005 Chevrolet Silverado 1500 HD LS 2003,2005-2006 Chevrolet Silverado 1500 HD LT 2003-2005 GMC Sierra 1500 Base 2003-2006 GMC Sierra 1500 Denali 2005-2006 GMC Sierra 1500 Hybrid 2003,2006 GMC Sierra 1500 SL 2003-2006 GMC Sierra 1500 SLE 2003-2006 GMC Sierra 1500 SLT 2003-2006 GMC Sierra 1500 WT 2007 GMC Sierra 1500 Classic Denali 2007 GMC Sierra 1500 Classic Hybrid 2007 GMC Sierra 1500 Classic SL 2007 GMC Sierra 1500 Classic SLE 2007 GMC Sierra 1500 Classic SLT 2007 GMC Sierra 1500 Classic WT 2003,2005-2006 GMC Sierra 1500 HD SLE 2003,2005-2006 GMC Sierra 1500 HD SLT

The Edelbrock supercharger Stage 1 Street system part #1593 for 2005-07 Chevy Corvette increases the performance of your LS2 engine to 554 horsepower and 515 ft-lbs of torque at the crank. The core of this system is the Eaton Gen VI 2300 TVS rotating assembly with a four-lobe design with 160 degrees of twist for maximum flow, minimum temperature rise and quiet operation for excellent drivability. We also designed our superchargers with an integrated bypass valve to help eliminate parasitic loss under light throttle, improving mileage potential. Our unique and efficient inlet configuration results in a shorter, less restrictive intake path for improved airflow, without the need for a jack-shaft. Keeping the air cool is a high-capacity air-to-water intercooler and low-temp heat exchanger. The Edelbrock #1593 system is 50-state emissions legal. The supplied tune is intended for completely stock vehicles with the exception of a cat-back exhaust.Installation InstructionsMaterial Safety Data SheetThis Part Fits: Year Make Model Submodel 2005-2007 Chevrolet Corvette Base

The Edelbrock supercharger Stage 1 Street system part #15800 for 2005-09 Ford Mustangs increases the performance of your 4.6L 3V engine to 466 horsepower and 439 ft-lbs of torque at the crank when used with Edelbrock tune (kit supplied without a programmer). The core of this system is the Eaton Gen VI 2300 TVS rotating assembly with a four-lobe design with 160 degrees of twist for maximum flow, minimum temperature rise and quiet operation for excellent drivability. We also designed our superchargers with an integrated bypass valve to help eliminate parasitic loss under light throttle, improving mileage potential. Our unique and efficient inlet configuration results in a shorter, less restrictive intake path for improved airflow, without the need for a jack-shaft. Keeping the air cool is a high-capacity air-to-water intercooler and low-temp heat exchanger. HANDHELD PROGRAMMER NOT INCLUDED. Supercharger systems sold without tuners are only emissions legal when used with the correct Edelbrock program.Material Safety Data SheetThis Part Fits: Year Make Model Submodel 2008-2009 Ford Mustang Bullitt 2005-2009 Ford Mustang GT 2007-2008 Ford Mustang Shelby GT

The Edelbrock Supercharger System part #1536 is designed for your 2005-10 6.1L HEMI Chrysler 300, Dodge Charger or Challenger producing 556 horsepower and 501 ft-lbs of torque at the flywheel. The core of each system is the Eaton Gen VI 2300 Supercharger rotating assembly with a four-lobe design with 160 degrees of twist for maximum flow, minimum temperature rise and quiet operation for excellent drivability. We also designed our superchargers with an integrated bypass valve to help eliminate parasitic loss under light throttle, improving mileage potential. Our unique and efficient inlet configuration results in a shorter, less restrictive intake path for improved airflow, without the need for a jack-shaft. Keeping the air cool is a high-capacity air-to-water intercooler and low-temp heat exchanger.Installation InstructionsMaterial Safety Data SheetInstallation InstructionsThis Part Fits: Year Make Model Submodel 2005-2010 Chrysler 300 C SRT8 2008-2010 Dodge Challenger SRT8 2006-2010 Dodge Charger SRT8 2006-2008 Dodge Magnum SRT8

The Edelbrock supercharger Stage 1 Street System part #1572 for 2006-13 Corvette ZO6 with Dry sump increases the performance of your LS7 engine to 657 horsepower and 582 ft-lbs of torque to the flywheel. The core of this system is the Eaton Gen VI 2300 TVS rotating assembly with a four-lobe design with 160 degrees of twist for maximum flow, minimum temperature rise and quiet operation for excellent drivability. We also designed our superchargers with an integrated bypass valve to help eliminate parasitic loss under light throttle, improving mileage potential. Our unique and efficient inlet configuration results in a shorter, less restrictive intake path for improved airflow, without the need for a jack-shaft. Keeping the air cool is a high-capacity air-to-water intercooler and low-temp heat exchanger. The Edelbrock #1572 system is 50-state emissions legal. The supplied tune is intended for completely stock vehicles with the exception of a cat-back exhaust.Installation InstructionsTechnical DrawingMaterial Safety Data SheetThis Part Fits: Year Make Model Submodel 2006-2013 Chevrolet Corvette Z06 2011 Chevrolet Corvette Z06 Carbon

The Edelbrock supercharger Stage 1 Street system part #15830 for 2009-10 2-Wheel Drive Ford F-150 Trucks increases the performance of your 5.4L 3V engine to 478 horsepower and 504 ft-lbs of torque at the crank when used with Edelbrock tune (kit supplied without a programmer). The core of this system is the Eaton Gen VI 2300 TVS rotating assembly with a four-lobe design with 160 degrees of twist for maximum flow, minimum temperature rise and quiet operation for excellent drivability. We also designed our superchargers with an integrated bypass valve to help eliminate parasitic loss under light throttle, improving mileage potential. Our unique and efficient inlet configuration results in a shorter, less restrictive intake path for improved airflow, without the need for a jack-shaft. Keeping the air cool is a high-capacity air-to-water intercooler and low-temp heat exchanger. HANDHELD PROGRAMMER NOT INCLUDED. Supercharger systems sold without tuners are only emissions legal when used with the correct Edelbrock program.Material Safety Data SheetThis Part Fits: Year Make Model Submodel 2007-2010 Ford Expedition Eddie Bauer 2007-2010 Ford Expedition EL Eddie Bauer 2008-2013 Ford Expedition EL King Ranch 2007-2013 Ford Expedition EL Limited 2011-2013 Ford Expedition EL XL 2007-2013 Ford Expedition EL XLT 2008 Ford Expedition Funkmaster Flex Edition 2008-2013 Ford Expedition King Ranch 2007-2013 Ford Expedition Limited 2011-2013 Ford Expedition XL 2007-2013 Ford Expedition XLT 2010 Ford F-150 FX2 2010 Ford F-150 Harley-Davidson Edition 2009-2010 Ford F-150 King Ranch 2009-2010 Ford F-150 Lariat 2009-2010 Ford F-150 Platinum 2009-2010 Ford F-150 XL 2009-2010 Ford F-150 XLT 2008-2013 Lincoln Navigator Base 2008-2013 Lincoln Navigator L 2007 Lincoln Navigator L Luxury 2007 Lincoln Navigator L Ultimate 2007 Lincoln Navigator Luxury 2007 Lincoln Navigator Ultimate

The Edelbrock supercharger Stage 1 Street system part #1583 for 2009-10 2-Wheel Drive Ford F-150 Trucks. This kit produces excellent horsepower and torque. The core of this system is the Eaton Gen VI 2300 TVS rotating assembly with a four-lobe design with 160 degrees of twist for maximum flow, minimum temperature rise and quiet operation for excellent drivability. We also designed our superchargers with an integrated bypass valve to help eliminate parasitic loss under light throttle, improving mileage potential. Our unique and efficient inlet configuration results in a shorter, less restrictive intake path for improved airflow, without the need for a jack-shaft. Keeping the air cool is a high-capacity air-to-water intercooler and low-temp heat exchanger. The Edelbrock #1583 system is 50-state emissions legal. The supplied tune is intended for completely stock vehicles with the exception of a cat-back exhaust.Installation InstructionsMaterial Safety Data SheetThis Part Fits: Year Make Model Submodel 2007-2010 Ford Expedition Eddie Bauer 2007-2010 Ford Expedition EL Eddie Bauer 2008-2013 Ford Expedition EL King Ranch 2007-2013 Ford Expedition EL Limited 2011-2013 Ford Expedition EL XL 2007-2013 Ford Expedition EL XLT 2008 Ford Expedition Funkmaster Flex Edition 2008-2013 Ford Expedition King Ranch 2007-2013 Ford Expedition Limited 2011-2013 Ford Expedition XL 2007-2013 Ford Expedition XLT 2010 Ford F-150 FX2 2010 Ford F-150 Harley-Davidson Edition 2009-2010 Ford F-150 King Ranch 2009-2010 Ford F-150 Lariat 2009-2010 Ford F-150 Platinum 2009-2010 Ford F-150 XL 2009-2010 Ford F-150 XLT 2008-2013 Lincoln Navigator Base 2008-2013 Lincoln Navigator L 2007 Lincoln Navigator L Luxury 2007 Lincoln Navigator L Ultimate 2007 Lincoln Navigator Luxury 2007 Lincoln Navigator Ultimate

The Edelbrock supercharger Stage 1 Street system part #15780 for 2007-13 Silverado and Sierra 1500 increases the performance of your 5.3L Gen IV engine to 364 horsepower and 397 ft-lbs of torque at the rear wheels. With the 4.8L Gen IV engine expect an increase to 334 horsepower and 380 ft-lbs of torque at the rear wheels when used with Edelbrock tune (kit supplied without a programmer). The core of this system is the Eaton Gen VI 2300 TVS rotating assembly with a four-lobe design with 160 degrees of twist for maximum flow, minimum temperature rise and quiet operation for excellent drivability. We also designed our superchargers with an integrated bypass valve to help eliminate parasitic loss under light throttle, improving mileage potential. Our unique and efficient inlet configuration results in a shorter, less restrictive intake path for improved airflow, without the need for a jack-shaft. Keeping the air cool is a high-capacity air-to-water intercooler and low-temp heat exchanger. HANDHELD PROGRAMMER NOT INCLUDED. Supercharger systems sold without tuners are only emissions legal when used with the correct Edelbrock program.Installation InstructionsMaterial Safety Data SheetThis Part Fits: Year Make Model Submodel 2007-2013 Chevrolet Silverado 1500 LS 2007-2013 Chevrolet Silverado 1500 LT 2007-2013 Chevrolet Silverado 1500 LTZ 2007-2013 Chevrolet Silverado 1500 WT 2010-2013 Chevrolet Silverado 1500 XFE 2008-2013 GMC Sierra 1500 SL 2007-2013 GMC Sierra 1500 SLE 2007-2013 GMC Sierra 1500 SLT 2007-2013 GMC Sierra 1500 WT 2010-2013 GMC Sierra 1500 XFE

The Edelbrock supercharger Stage 1 Street system part #1578 is for 2007-13 Silverado and Sierra 1500 trucks. This supercharger system works with the 4.8L and 5.3L Gen III engines and increases the performance of the 4.8L engine to 334 horsepower and 380 ft-lbs of torque at the rear wheels and the 5.3L engine to 364 horsepower and 397 ft-lbs of torque at the rear wheels. The core of this system is the Eaton Gen VI 2300 TVS rotating assembly with a four-lobe design with 160 degrees of twist for maximum flow, minimum temperature rise and quiet operation for excellent drivability. We also designed our superchargers with an integrated bypass valve to help eliminate parasitic loss under light throttle, improving mileage potential. Our unique and efficient inlet configuration results in a shorter, less restrictive intake path for improved airflow, without the need for a jack-shaft. Keeping the air cool is a high-capacity air-to-water intercooler and low-temp heat exchanger. The Edelbrock #1578 system is 50-state emissions legal. The supplied tune is intended for completely stock vehicles with the exception of a cat-back exhaust.Installation InstructionsMaterial Safety Data SheetThis Part Fits: Year Make Model Submodel 2007-2013 Chevrolet Silverado 1500 LS 2007-2013 Chevrolet Silverado 1500 LT 2007-2013 Chevrolet Silverado 1500 LTZ 2007-2013 Chevrolet Silverado 1500 WT 2010-2013 Chevrolet Silverado 1500 XFE 2008-2013 GMC Sierra 1500 SL 2007-2013 GMC Sierra 1500 SLE 2007-2013 GMC Sierra 1500 SLT 2007-2013 GMC Sierra 1500 WT 2010-2013 GMC Sierra 1500 XFE

The Edelbrock supercharger Stage 1 Street System part #1564 for 2007-14 Suburban, Tahoe, Yukon & Yukon XL increases the performance of your 5.3L Gen IV engine to 384 horsepower and 390 ft-lbs of torque at the rear wheels. The core of this system is the Eaton Gen VI 2300 TVS rotating assembly with a four-lobe design with 160 degrees of twist for maximum flow, minimum temperature rise and quiet operation for excellent drivability. We also designed our superchargers with an integrated bypass valve to help eliminate parasitic loss under light throttle, improving mileage potential. Our unique and efficient inlet configuration results in a shorter, less restrictive intake path for improved airflow, without the need for a jack-shaft. Keeping the air cool is a high-capacity air-to-water intercooler and low-temp heat exchanger. The Edelbrock #1564 system is 50-state emissions legal. The supplied tune is intended for completely stock vehicles with the exception of a cat-back exhaust.Installation InstructionsMaterial Safety Data SheetThis Part Fits: Year Make Model Submodel 2013 Chevrolet Avalanche Black Diamond LS 2013 Chevrolet Avalanche Black Diamond LT 2013 Chevrolet Avalanche Black Diamond LTZ 2007-2012 Chevrolet Avalanche LS 2007-2012 Chevrolet Avalanche LT 2007-2012 Chevrolet Avalanche LTZ 2007-2013 Chevrolet Suburban 1500 LS 2007-2013 Chevrolet Suburban 1500 LT 2007-2013 Chevrolet Suburban 1500 LTZ 2007-2014 Chevrolet Tahoe LS 2007-2014 Chevrolet Tahoe LT 2007-2014 Chevrolet Tahoe LTZ 2007-2014 Chevrolet Tahoe PPV 2012-2014 Chevrolet Tahoe SSV 2007-2014 GMC Yukon SLE 2007-2014 GMC Yukon SLT 2007-2014 GMC Yukon XL 1500 SLE 2007-2014 GMC Yukon XL 1500 SLT

The Edelbrock supercharger Stage 1 Street System part #1567 for 2007-14 Escalade, Escalade ESV, Escalade EXT, Yukon & Yukon XL applications with a 6.2L Gen IV engine. The core of this system is the Eaton Gen VI 2300 TVS rotating assembly with a four-lobe design with 160 degrees of twist for maximum flow, minimum temperature rise and quiet operation for excellent drivability. We also designed our superchargers with an integrated bypass valve to help eliminate parasitic loss under light throttle, improving mileage potential. Our unique and efficient inlet configuration results in a shorter, less restrictive intake path for improved airflow, without the need for a jack-shaft. Keeping the air cool is a high-capacity air-to-water intercooler and low-temp heat exchanger. The Edelbrock #1567 system is 50-state emissions legal. The supplied tune is intended for completely stock vehicles with the exception of a cat-back exhaust.Installation InstructionsMaterial Safety Data SheetThis Part Fits: Year Make Model Submodel 2007-2014 Cadillac Escalade Base 2011-2014 Cadillac Escalade Luxury 2008-2014 Cadillac Escalade Platinum 2011-2014 Cadillac Escalade Premium 2007-2014 Cadillac Escalade ESV Base 2011-2014 Cadillac Escalade ESV Luxury 2008-2014 Cadillac Escalade ESV Platinum 2011-2014 Cadillac Escalade ESV Premium 2007-2013 Cadillac Escalade EXT Base 2011-2013 Cadillac Escalade EXT Luxury 2011-2013 Cadillac Escalade EXT Premium 2008-2009 Chevrolet Tahoe LTZ 2007-2014 GMC Yukon Denali 2007-2014 GMC Yukon XL 1500 Denali 2007-2009 GMC Yukon XL 1500 SLE 2007-2013 GMC Yukon XL 1500 SLT 2007-2013 GMC Yukon XL 2500 SLE 2007-2013 GMC Yukon XL 2500 SLT

The Edelbrock supercharger Stage 1 Street System part #15640 for 2007-14 Suburban, Tahoe, Yukon & Yukon XL increases the performance of your 5.3L Gen IV engine to 384 horsepower and 390 ft-lbs of torque at the rear wheels when used with Edelbrock tune (kit supplied without a programmer). The core of this system is the Eaton Gen VI 2300 TVS rotating assembly with a four-lobe design with 160 degrees of twist for maximum flow, minimum temperature rise and quiet operation for excellent drivability. We also designed our superchargers with an integrated bypass valve to help eliminate parasitic loss under light throttle, improving mileage potential. Our unique and efficient inlet configuration results in a shorter, less restrictive intake path for improved airflow, without the need for a jack-shaft. Keeping the air cool is a high-capacity air-to-water intercooler and low-temp heat exchanger. HANDHELD PROGRAMMER NOT INCLUDED. Supercharger systems sold without tuners are only emissions legal when used with the correct Edelbrock program.Material Safety Data SheetThis Part Fits: Year Make Model Submodel 2013 Chevrolet Avalanche Black Diamond LS 2013 Chevrolet Avalanche Black Diamond LT 2013 Chevrolet Avalanche Black Diamond LTZ 2007-2012 Chevrolet Avalanche LS 2007-2012 Chevrolet Avalanche LT 2007-2012 Chevrolet Avalanche LTZ 2007-2013 Chevrolet Suburban 1500 LS 2007-2013 Chevrolet Suburban 1500 LT 2007-2013 Chevrolet Suburban 1500 LTZ 2007-2014 Chevrolet Tahoe LS 2007-2014 Chevrolet Tahoe LT 2007-2014 Chevrolet Tahoe LTZ 2007-2014 Chevrolet Tahoe PPV 2012-2014 Chevrolet Tahoe SSV 2007-2014 GMC Yukon SLE 2007-2014 GMC Yukon SLT 2007-2014 GMC Yukon XL 1500 SLE 2007-2014 GMC Yukon XL 1500 SLT