MagnaFlow

Keep the check engine light off with MagnaFlow OEM Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 22-081. With features including free-flowing mandrel-bent tubing and highly corrosion resistant, stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow's state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency.Designed to fit the 2011-2016 Hyundai Elantra, 2013-2017 Kia Forte, and more, this direct-fit catalytic converter also interchanges with OE part 28510-2E350. The included gaskets & hardware reduce the possibility of a leaking seal while avoiding the need to reuse corroded factory parts for installation. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with California or Federal/EPA Emission systems.This Part Fits: Year Make Model Submodel 2011-2013 Hyundai Elantra GLS 2011-2019 Hyundai Elantra Limited 2014-2019 Hyundai Elantra SE 2018-2019 Hyundai Elantra SEL 2016-2018 Hyundai Elantra Value Edition 2013 Hyundai Elantra Coupe GS 2013 Hyundai Elantra Coupe SE 2013 Hyundai Elantra GT Base 2013-2018 Kia Forte EX 2013-2018 Kia Forte LX 2017-2018 Kia Forte S 2014-2016 Kia Forte Koup EX

Made in the USA and engineered to last, for those seeking increased performance and better economy, MagnaFlow MF Series Performance Exhaust systems deliver the smooth deep sound you want and the wide-open performance power you need. Our exhaust systems feature straight-through flow designs for the ultimate in unrestricted horsepower and torque for big power while maintaining exhaust efficiency. These systems are an engineered balance of interior and exterior noise levels and are tested against SAE j1169 standards.Installation InstructionsUser 1This Part Fits: Year Make Model Submodel 2015-2019 Chevrolet Silverado 2500 HD High Country 2011-2019 Chevrolet Silverado 2500 HD LT 2011-2019 Chevrolet Silverado 2500 HD LTZ 2011-2019 Chevrolet Silverado 2500 HD WT 2015-2019 Chevrolet Silverado 3500 HD High Country 2011-2019 Chevrolet Silverado 3500 HD LT 2011-2019 Chevrolet Silverado 3500 HD LTZ 2011-2019 Chevrolet Silverado 3500 HD WT 2015-2019 GMC Sierra 2500 HD Base 2011-2019 GMC Sierra 2500 HD Denali 2011-2019 GMC Sierra 2500 HD SLE 2011-2019 GMC Sierra 2500 HD SLT 2011-2014 GMC Sierra 2500 HD WT 2015-2019 GMC Sierra 3500 HD Base 2011-2019 GMC Sierra 3500 HD Denali 2011-2019 GMC Sierra 3500 HD SLE 2011-2019 GMC Sierra 3500 HD SLT 2011-2014 GMC Sierra 3500 HD WT

Made in the USA and engineered to last, for those seeking increased performance and better economy, MagnaFlow MF Series Performance Exhaust systems deliver the smooth deep sound you want and the wide-open performance power you need. Our exhaust systems feature straight-through flow designs for the ultimate in unrestricted horsepower and torque for big power while maintaining exhaust efficiency. These systems are an engineered balance of interior and exterior noise levels and are tested against SAE j1169 standards.Installation InstructionsUser 1This Part Fits: Year Make Model Submodel 2015-2019 Chevrolet Silverado 2500 HD High Country 2011-2019 Chevrolet Silverado 2500 HD LT 2011-2019 Chevrolet Silverado 2500 HD LTZ 2011-2019 Chevrolet Silverado 2500 HD WT 2015-2019 Chevrolet Silverado 3500 HD High Country 2011-2019 Chevrolet Silverado 3500 HD LT 2011-2019 Chevrolet Silverado 3500 HD LTZ 2011-2019 Chevrolet Silverado 3500 HD WT 2015-2019 GMC Sierra 2500 HD Base 2011-2019 GMC Sierra 2500 HD Denali 2011-2019 GMC Sierra 2500 HD SLE 2011-2019 GMC Sierra 2500 HD SLT 2011-2014 GMC Sierra 2500 HD WT 2015-2019 GMC Sierra 3500 HD Base 2011-2019 GMC Sierra 3500 HD Denali 2011-2019 GMC Sierra 3500 HD SLE 2011-2019 GMC Sierra 3500 HD SLT 2011-2014 GMC Sierra 3500 HD WT

Made in the USA and engineered to last, for those seeking increased performance and better economy, MagnaFlow Touring Series Performance Exhaust systems deliver the smooth deep sound you want and the wide-open performance power you need. Our exhaust systems feature straight-through flow designs for the ultimate in unrestricted horsepower and torque for big power while maintaining exhaust efficiency. These systems are an engineered balance of interior and exterior noise levels and are tested against SAE j1169 standards.User 1Installation InstructionsThis Part Fits: Year Make Model Submodel 2012-2016 BMW 328i Base 2014-2016 BMW 328i GT xDrive Base 2013-2016 BMW 328i xDrive Base 2014-2016 BMW 428i Base 2014-2015 BMW 428i xDrive Base

The MagnaFlow Fiat 500 Touring Series 15088 brings enhanced engine sound and dyno-proven performance to your 1.4L 2012-2019 Fiat 500 with a healthy helping of our deep, resonant signature exhaust note at Moderate exterior and Mild interior sound levels. Thanks to its durable, corrosion resistant stainless steel design, this Fiat 500 exhaust system will handle whatever tarmac you decide to leave your mark on. This performance exhaust kit features a crossmember-back layout designed to replace your Fiat 500’s exhaust system from the crossmember on back. With its fast-flowing, mandrel bent 2.25in. main piping and 2 Straight-Through muffler ending in a Dual Straight Driver Side Rear exit with 3 Polished Welded-Double Wall-Angle Cut-Folded Edge tips, your muscle car will be sounding as awesome as it looks. Extensive 3D scanning during development has resulted in a direct-fit design that you can easily install yourself. 15088 is produced using CNC precision robotic manufacturing techniques and is backed by MagnaFlow’s limited lifetime construction warranty.User 1Installation InstructionsThis Part Fits: Year Make Model Submodel 2016 Fiat 500 c Easy 2012 Fiat 500 c Gucci 2012-2019 Fiat 500 c Lounge 2012-2019 Fiat 500 c Pop 2016 Fiat 500 Easy 2012 Fiat 500 Gucci 2012-2019 Fiat 500 Lounge 2012-2019 Fiat 500 Pop 2012-2016 Fiat 500 Sport

The MagnaFlow Ford Focus Street Series 15072 brings out the personality of your 2.0L 2012-2018 Ford Focus with our signature resonant, powerful engine tone and dyno-proven performance. Thanks to its fast-flowing, mandrel bent 2.25in. main piping and 2 Straight-Through mufflers ending in a Single Straight Passenger Side Rear exit with 3in. Polished Welded-Double Wall-Angle Cut-Folded Edge tips, this Ford Focus exhaust kit has the performance chops to match its sporty sound and appearance. Upgrade your ride to the next level with an exhaust that has the pipes to put other Ford Focus’s to shame. With this system your vehicle will be producing Moderate exterior and Mild interior sound levels while leaving other cars and trucks feeling envious at every stoplight. Exhaust kit 15072 features a cat-back layout that replaces your ride’s stock exhaust components from near the catalytic converter on back. Extensive 3D scanning during development has resulted in a direct-fit design that you can easily install yourself. 15072 is produced using CNC precision robotic manufacturing techniques and is backed by MagnaFlow’s 1-year limited finish warranty and limited lifetime construction warranty.User 1Installation InstructionsThis Part Fits: Year Make Model Submodel 2012 Ford Focus S 2012-2018 Ford Focus SE 2012,2018 Ford Focus SEL 2013-2016,2018 Ford Focus ST 2012-2018 Ford Focus Titanium

The MagnaFlow Ford Mustang Competition Series 15077 brings an aggressive, attention-grabbing edge to the deep resonant exhaust note we’re so well known for. This exhaust kit is designed to enhance your 5.0L 2011-2012 Ford Mustang with dyno-proven performance made possible thanks to fast-flowing mandrel bent 3in. main piping and 2 Straight-Through mufflers ending in a Quad Split Rear exit with 4in. Polished Welded-Double Wall-Angle Cut-Folded Edge tips featuring a sporty finish. The exhaust system’s axle-back layout replaces your ride’s exhaust system from near the rear axle on back. Exhaust system 15077 is engineered to make your vehicle’s engine produce Agressive exterior and Moderate interior sound levels, befitting its competition-oriented design. 15077’s direct-fit design makes installation a breeze thanks to the use of advanced 3D scanning techniques. This performance exhaust system is made of 100% durable and corrosion-resistant stainless steel and produced using CNC precision robotic manufacturing, all backed by MagnaFlow’s limited lifetime warranty. Please check to ensure compliance with local noise regulations.User 1Installation InstructionsThis Part Fits: Year Make Model Submodel 2012 Ford Mustang Boss 302 2011-2012 Ford Mustang GT

The MagnaFlow Jeep Grand Cherokee Street Series 15064 brings out the personality of your 6.2L, 6.4L 2012-2021 Jeep Grand Cherokee with our signature resonant, powerful engine tone and dyno-proven performance. Thanks to its fast-flowing, mandrel bent 3in. main piping and 4 Straight-Through mufflers ending in a Dual Split Rear exit, this Jeep Grand Cherokee exhaust kit has the performance chops to match its sporty sound and appearance. Upgrade your ride to the next level with an exhaust that has the pipes to put other Jeep Grand Cherokee’s to shame. With this system your vehicle will be producing Moderate exterior and Mild interior sound levels while leaving other cars and trucks feeling envious at every stoplight. Exhaust kit 15064 features a cat-back layout that replaces your ride’s stock exhaust components from near the catalytic converter on back. Extensive 3D scanning during development has resulted in a direct-fit design that you can easily install yourself. 15064 is produced using CNC precision robotic manufacturing techniques and is backed by MagnaFlow’s 1-year limited finish warranty and limited lifetime construction warranty.User 1Installation InstructionsThis Part Fits: Year Make Model Submodel 2014-2021 Jeep Grand Cherokee SRT 2012-2013 Jeep Grand Cherokee SRT8 2018-2021 Jeep Grand Cherokee Trackhawk

The MagnaFlow Volkswagen Jetta Touring Series 15158 brings enhanced engine sound and dyno-proven performance to your 1.8L, 2.0L 2012-2018 Volkswagen Jetta with a healthy helping of our deep, resonant signature exhaust note at Moderate exterior and Mild interior sound levels. Thanks to its durable, corrosion resistant stainless steel design, this Volkswagen Jetta exhaust system will handle whatever tarmac you decide to leave your mark on. This performance exhaust kit features a crossmember-back layout designed to replace your Volkswagen Jetta’s exhaust system from the crossmember on back. With its fast-flowing, mandrel bent 2.5in. main piping and 2 Straight-Through muffler ending in a Dual Straight Driver Side Rear exit with 3 Polished Welded-Double Wall-Angle Cut-Rolled Edge tips, your muscle car will be sounding as awesome as it looks. Extensive 3D scanning during development has resulted in a direct-fit design that you can easily install yourself. 15158 is produced using CNC precision robotic manufacturing techniques and is backed by MagnaFlow’s limited lifetime construction warranty.User 1Installation InstructionsThis Part Fits: Year Make Model Submodel 2012-2014,2017-2018 Volkswagen Jetta GLI 2015-2016 Volkswagen Jetta GLI SE 2015-2016 Volkswagen Jetta GLI SEL 2013 Volkswagen Jetta Hybrid 2013 Volkswagen Jetta Hybrid SE 2013 Volkswagen Jetta Hybrid SEL 2014-2015 Volkswagen Jetta SE 2018 Volkswagen Jetta SE Sport 2014-2018 Volkswagen Jetta SEL 2016 Volkswagen Jetta SEL Premium 2015-2018 Volkswagen Jetta Sport 2012-2014 Volkswagen Jetta TDI 2012-2014 Volkswagen Jetta TDI Premium

The MagnaFlow Volkswagen Golf R Touring Series 15156 brings enhanced engine sound and dyno-proven performance to your 2.0L 2012-2013 Volkswagen Golf R with a healthy helping of our deep, resonant signature exhaust note at Moderate exterior and Mild interior sound levels. Thanks to its durable, corrosion resistant stainless steel design, this Volkswagen Golf R exhaust system will handle whatever tarmac you decide to leave your mark on. This performance exhaust kit features a crossmember-back layout designed to replace your Volkswagen Golf R’s exhaust system from the crossmember on back. With its fast-flowing, mandrel bent 3in. main piping and 1 Straight-Through muffler ending in a Dual Center Rear exit with 4 Polished Welded-Double Wall-Angle Cut-Folded Edge tips, your muscle car will be sounding as awesome as it looks. Extensive 3D scanning during development has resulted in a direct-fit design that you can easily install yourself. 15156 is produced using CNC precision robotic manufacturing techniques and is backed by MagnaFlow’s limited lifetime construction warranty.User 1Installation InstructionsThis Part Fits: Year Make Model Submodel 2012-2013 Volkswagen Golf R Base

Keep the check engine light off with MagnaFlow California Grade CARB Compliant Direct-Fit Catalytic Converter 5531020. With features including free-flowing mandrel-bent tubing and highly corrosion resistant, stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow's state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency.This direct-fit catalytic converter is designed specifically for the 2012-2014 Honda CR-V. Avoid potential exhaust leaks by using the included gaskets to get a proper seal. This replacement part is designed to meet or exceed California Air Resource Board requirements, and has undergone additional testing to be certified by CARB for legal use in CA/CARB restricted states for the listed vehicles.This Part Fits: Year Make Model Submodel 2012-2014 Honda CR-V EX 2012-2014 Honda CR-V EX-L 2012-2014 Honda CR-V LX

The MagnaFlow Jeep Competition Series 15118 brings an aggressive, attention-grabbing edge to the deep resonant exhaust note we’re so well known for. This exhaust kit is designed to enhance your 3.6L 2012-2018 Jeep with dyno-proven performance made possible thanks to fast-flowing mandrel bent 2.5in. main piping and 1 Straight-Through mufflers ending in a Single Straight Passenger Side Rear exit with 2.5in. Satin Welded-Single Wall-Angle Cut-Cut Edge tips featuring a sporty finish. The exhaust system’s cat-back layout replaces your ride’s exhaust system from near the catalytic converter on back. Exhaust system 15118 is engineered to make your vehicle’s engine produce Agressive exterior and Moderate interior sound levels, befitting its competition-oriented design. 15118’s direct-fit design makes installation a breeze thanks to the use of advanced 3D scanning techniques. This performance exhaust system is made of 100% durable and corrosion-resistant stainless steel and produced using CNC precision robotic manufacturing, all backed by MagnaFlow’s limited lifetime warranty. Please check to ensure compliance with local noise regulations.User 1Installation InstructionsThis Part Fits: Year Make Model Submodel 2016 Jeep Wrangler 75th Anniversary 2012-2017 Jeep Wrangler Rubicon 2012-2017 Jeep Wrangler Sahara 2012-2017 Jeep Wrangler Sport 2016 Jeep Wrangler Sport S 2016 Jeep Wrangler Unlimited 75th Anniversary 2012-2017 Jeep Wrangler Unlimited Rubicon 2012-2017 Jeep Wrangler Unlimited Sahara 2012-2017 Jeep Wrangler Unlimited Sport 2016 Jeep Wrangler Unlimited Sport S 2018 Jeep Wrangler JK Rubicon 2018 Jeep Wrangler JK Sahara 2018 Jeep Wrangler JK Sport 2018 Jeep Wrangler JK Sport S 2018 Jeep Wrangler JK Unlimited Rubicon 2018 Jeep Wrangler JK Unlimited Sahara 2018 Jeep Wrangler JK Unlimited Sport

The MagnaFlow Jeep Competition Series 15117 brings an aggressive, attention-grabbing edge to the deep resonant exhaust note we’re so well known for. This exhaust kit is designed to enhance your 3.6L 2012-2018 Jeep with dyno-proven performance made possible thanks to fast-flowing mandrel bent 2.5in. main piping and 1 Straight-Through mufflers ending in a Single Straight Passenger Side Rear exit with 2.5in. Satin Welded-Single Wall-Angle Cut-Cut Edge tips featuring a sporty finish. The exhaust system’s cat-back layout replaces your ride’s exhaust system from near the catalytic converter on back. Exhaust system 15117 is engineered to make your vehicle’s engine produce Agressive exterior and Moderate interior sound levels, befitting its competition-oriented design. 15117’s direct-fit design makes installation a breeze thanks to the use of advanced 3D scanning techniques. This performance exhaust system is made of 100% durable and corrosion-resistant stainless steel and produced using CNC precision robotic manufacturing, all backed by MagnaFlow’s limited lifetime warranty. Please check to ensure compliance with local noise regulations.User 1Installation InstructionsThis Part Fits: Year Make Model Submodel 2016 Jeep Wrangler 75th Anniversary 2012-2017 Jeep Wrangler Rubicon 2012-2017 Jeep Wrangler Sahara 2012-2017 Jeep Wrangler Sport 2016 Jeep Wrangler Sport S 2016 Jeep Wrangler Unlimited 75th Anniversary 2012-2017 Jeep Wrangler Unlimited Rubicon 2012-2017 Jeep Wrangler Unlimited Sahara 2012-2017 Jeep Wrangler Unlimited Sport 2016 Jeep Wrangler Unlimited Sport S 2018 Jeep Wrangler JK Rubicon 2018 Jeep Wrangler JK Sahara 2018 Jeep Wrangler JK Sport 2018 Jeep Wrangler JK Unlimited Rubicon 2018 Jeep Wrangler JK Unlimited Sahara 2018 Jeep Wrangler JK Unlimited Sport 2018 Jeep Wrangler JK Unlimited Sport S

The MagnaFlow Jeep Off Road Pro Series 17144 brings additional off-roading prowess and our deep signature exhaust note to your 3.6L 2012-2018 Jeep with a weight-optimized, dyno-tested, corrosion resistant and durable stainless steel design engineered to closely hug the undercarriage for improved ground clearance. Exhaust kit 17144 is engineered to produce VeryAggressive exterior and Aggressive interior sound levels. Extensive 3D scanning was used during the development of this Jeep exhaust system to create a direct-fit design, enabling a do-it-yourself installation process. 17144’s emissions-legal cat-back design replaces all your truck’s exhaust components from the catalytic converter on back with its 2.5in. diameter mandrel bent main piping that passes through 1 Straight-Through mufflers before ending in a turndown before rear axle exit with 3in. Satin Clamp-On-Single Wall-Turndown-Cut Edge tips. Exhaust system 17144 is produced using advanced CNC precision robotic manufacturing techniques and backed by MagnaFlow’s limited lifetime warranty.User 1Installation InstructionsThis Part Fits: Year Make Model Submodel 2016 Jeep Wrangler 75th Anniversary 2012-2017 Jeep Wrangler Rubicon 2012-2017 Jeep Wrangler Sahara 2012-2017 Jeep Wrangler Sport 2016 Jeep Wrangler Sport S 2016 Jeep Wrangler Unlimited 75th Anniversary 2012-2017 Jeep Wrangler Unlimited Rubicon 2012-2017 Jeep Wrangler Unlimited Sahara 2012-2017 Jeep Wrangler Unlimited Sport 2016 Jeep Wrangler Unlimited Sport S 2018 Jeep Wrangler JK Rubicon 2018 Jeep Wrangler JK Sahara 2018 Jeep Wrangler JK Sport 2018 Jeep Wrangler JK Sport S 2018 Jeep Wrangler JK Unlimited Rubicon 2018 Jeep Wrangler JK Unlimited Sahara 2018 Jeep Wrangler JK Unlimited Sport

The MagnaFlow Jeep Off Road Pro Series 17143 brings additional off-roading prowess and our deep signature exhaust note to your 3.6L 2012-2018 Jeep with a weight-optimized, dyno-tested, corrosion resistant and durable stainless steel design engineered to closely hug the undercarriage for improved ground clearance. Exhaust kit 17143 is engineered to produce VeryAggressive exterior and Aggressive interior sound levels. Extensive 3D scanning was used during the development of this Jeep exhaust system to create a direct-fit design, enabling a do-it-yourself installation process. 17143’s emissions-legal cat-back design replaces all your truck’s exhaust components from the catalytic converter on back with its 2.5in. diameter mandrel bent main piping that passes through 1 Straight-Through mufflers before ending in a turndown before rear axle exit with 3in. Satin Clamp-On-Single Wall-Turndown-Cut Edge tips. Exhaust system 17143 is produced using advanced CNC precision robotic manufacturing techniques and backed by MagnaFlow’s limited lifetime warranty.User 1Installation InstructionsThis Part Fits: Year Make Model Submodel 2016 Jeep Wrangler 75th Anniversary 2012-2017 Jeep Wrangler Rubicon 2012-2017 Jeep Wrangler Sahara 2012-2017 Jeep Wrangler Sport 2016 Jeep Wrangler Sport S 2016 Jeep Wrangler Unlimited 75th Anniversary 2012-2017 Jeep Wrangler Unlimited Rubicon 2012-2017 Jeep Wrangler Unlimited Sahara 2012-2017 Jeep Wrangler Unlimited Sport 2016 Jeep Wrangler Unlimited Sport S 2018 Jeep Wrangler JK Rubicon 2018 Jeep Wrangler JK Sahara 2018 Jeep Wrangler JK Sport 2018 Jeep Wrangler JK Unlimited Rubicon 2018 Jeep Wrangler JK Unlimited Sahara 2018 Jeep Wrangler JK Unlimited Sport 2018 Jeep Wrangler JK Unlimited Sport S

The MagnaFlow Toyota 4Runner Street Series 15145 brings out the personality of your 4.0L 2012-2022 Toyota 4Runner with our signature resonant, powerful engine tone and dyno-proven performance. Thanks to its fast-flowing, mandrel bent 2.5in. main piping and 1 Straight-Through mufflers ending in a Single Straight Passenger Side Rear exit with 4in. Polished Welded-Double Wall-Angle Cut-Rolled Edge tips, this Toyota 4Runner exhaust kit has the performance chops to match its sporty sound and appearance. Upgrade your ride to the next level with an exhaust that has the pipes to put other Toyota 4Runner’s to shame. With this system your vehicle will be producing Moderate exterior and Mild interior sound levels while leaving other cars and trucks feeling envious at every stoplight. Exhaust kit 15145 features a cat-back layout that replaces your ride’s stock exhaust components from near the catalytic converter on back. Extensive 3D scanning during development has resulted in a direct-fit design that you can easily install yourself. 15145 is produced using CNC precision robotic manufacturing techniques and is backed by MagnaFlow’s 1-year limited finish warranty and limited lifetime construction warranty.User 1Installation InstructionsThis Part Fits: Year Make Model Submodel 2023 Toyota 4Runner 40th Anniversary Edition 2010-2024 Toyota 4Runner Limited 2020-2021 Toyota 4Runner Nightshade 2010-2024 Toyota 4Runner SR5 2018-2024 Toyota 4Runner SR5 Premium 2010-2016,2021-2022 Toyota 4Runner Trail 2017-2024 Toyota 4Runner TRD Off-Road 2018-2024 Toyota 4Runner TRD Off-Road Premium 2015-2024 Toyota 4Runner TRD Pro 2022-2024 Toyota 4Runner TRD Sport 2020-2021 Toyota 4Runner Venture

Keep the check engine light off with MagnaFlow OEM Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 52292. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow's state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency.Designed to fit the 2013-2015 Audi A6 Quattro and 2012-2015 Audi A6, this direct-fit catalytic converter also interchanges with OE part 4G0 254 250 JX. Hardware is included to eliminate the hassle of working with corroded factory parts. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with California or Federal/EPA Emission systems.This Part Fits: Year Make Model Submodel 2012-2015 Audi A6 Premium 2012-2015 Audi A6 Premium Plus 2013-2015 Audi A6 Quattro Premium 2013-2015 Audi A6 Quattro Premium Plus

The MagnaFlow Lexus LS460 Street Series 19296 brings enhanced engine sound and dyno-proven performance to your 4.6L 2012-2017 Lexus LS460 with a healthy helping of our deep, resonant signature exhaust note at Moderate exterior and Mild interior sound levels. Thanks to its durable, corrosion resistant stainless steel design, this Lexus LS460 exhaust system will handle whatever tarmac you decide to leave your mark on. This performance exhaust kit features an axle-back layout designed to replace your Lexus LS460’s exhaust system from near the rear axle on back. With its fast-flowing, mandrel bent 2.5in. main piping and 2 Straight-Through mufflers ending in a Dual Split Rear exit, your ride will be sounding as awesome as it looks. Extensive 3D scanning during development has resulted in a direct-fit design that you can easily install yourself. 19296 is produced using CNC precision robotic manufacturing techniques and is backed by MagnaFlow’s 1-year limited finish warranty and limited lifetime construction warranty.User 1Installation InstructionsThis Part Fits: Year Make Model Submodel 2012-2017 Lexus LS460 Base 2013-2017 Lexus LS460 F Sport 2012-2017 Lexus LS460 L

The MagnaFlow JK Jeep Wrangler Overland Series Cat-Back Performance Exhaust System #19539 will inject your Jeep Wrangler JK Unlimited (2012-2018) with MagnaFlow’s deep signature sound and dyno-proven performance. MagnaFlow exhaust kit #19539 i's weight optimized for improved utility and features a single straight-through muffler with 2.5” mandrel bent main piping that fits closer to the undercarriage of the vehicle compared to the stock configuration. This combined with a no-tip, high clearance driver side rear exit greatly enhances your JK Jeep Wrangler’s ground clearance and departure angles. The exhaust system was designed to be compatible with the most popular bolt-on aftermarket modifications. Each system incorporates MagnaFlow’s No Drone Technology, which mitigates interior noise by cancelling out the natural droning frequencies produced by your JK Jeep Wrangler at cruising speeds while retaining the character of your engine’s exhaust note. CNC precision robotic manufacturing techniques enable perfect fitment and allow for hassle-free bolt-on installation. MagnaFlow #19539 is made entirely of durable stainless steel and backed by MagnaFlow’s limited lifetime construction warranty.Installation InstructionsThis Part Fits: Year Make Model Submodel 2016 Jeep Wrangler 75th Anniversary 2012-2017 Jeep Wrangler Rubicon 2012-2017 Jeep Wrangler Sahara 2012-2017 Jeep Wrangler Sport 2016 Jeep Wrangler Sport S 2016 Jeep Wrangler Unlimited 75th Anniversary 2018 Jeep Wrangler Unlimited Moab 2012-2017 Jeep Wrangler Unlimited Rubicon 2012-2017 Jeep Wrangler Unlimited Sahara 2012-2017 Jeep Wrangler Unlimited Sport 2016 Jeep Wrangler Unlimited Sport S 2018 Jeep Wrangler JK Rubicon 2018 Jeep Wrangler JK Sahara 2018 Jeep Wrangler JK Sport 2018 Jeep Wrangler JK Sport S 2018 Jeep Wrangler JK Unlimited Rubicon 2018 Jeep Wrangler JK Unlimited Sahara 2018 Jeep Wrangler JK Unlimited Sport 2018 Jeep Wrangler JK Unlimited Sport S

Keep the check engine light off with MagnaFlow OEM Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 52281. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow's state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. Designed to fit the 2012-2013 Volkswagen Jetta, 2012-2017 Volkswagen CC, and more, this direct-fit catalytic converter also interchanges with OE parts 3C0 254 506 DX and 5C0 254 500 L, among others. Hardware is included to eliminate the hassle of working with corroded factory parts. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with California or Federal/EPA Emission systems.This Part Fits: Year Make Model Submodel 2012-2013 Volkswagen Beetle Turbo 2014-2015 Volkswagen CC Executive 2012-2013 Volkswagen CC Lux 2012 Volkswagen CC Lux Limited 2012 Volkswagen CC Lux Plus 2012-2016 Volkswagen CC R-Line 2016-2017 Volkswagen CC R-Line Executive 2012-2017 Volkswagen CC Sport 2013 Volkswagen CC Sport Plus 2016 Volkswagen CC Trend 2012-2013 Volkswagen Jetta GLI 2009-2010 Volkswagen Passat Komfort

The MagnaFlow Chevrolet Camaro Street Series 15053 brings out the personality of your 6.2L 2013-2015 Chevrolet Camaro with our signature resonant, powerful engine tone and dyno-proven performance. Thanks to its fast-flowing, mandrel bent 3in. main piping and 2 Straight-Through mufflers ending in a Quad Split Rear exit with 4in. Polished Welded-Double Wall-Angle Cut-Folded Edge tips, this Chevrolet Camaro exhaust kit has the performance chops to match its sporty sound and appearance. Upgrade your ride to the next level with an exhaust that has the pipes to put other Chevrolet Camaro’s to shame. With this system your vehicle will be producing Moderate exterior and Mild interior sound levels while leaving other cars and trucks feeling envious at every stoplight. Exhaust kit 15053 features a cat-back layout that replaces your ride’s stock exhaust components from near the catalytic converter on back. Extensive 3D scanning during development has resulted in a direct-fit design that you can easily install yourself. 15053 is produced using CNC precision robotic manufacturing techniques and is backed by MagnaFlow’s 1-year limited finish warranty and limited lifetime construction warranty.User 1Installation InstructionsThis Part Fits: Year Make Model Submodel 2013-2015 Chevrolet Camaro ZL1

The MagnaFlow Dodge Dart Street Series 15181 brings out the personality of your 1.4L, 2.4L 2013-2016 Dodge Dart with our signature resonant, powerful engine tone and dyno-proven performance. Thanks to its fast-flowing, mandrel bent 2.25in. main piping and 1 Straight-Through mufflers ending in a Dual Split Rear exit with 3.25 x 4.75in. Polished Welded-Double Wall-Angle Cut-Folded Edge-Resonated tips, this Dodge Dart exhaust kit has the performance chops to match its sporty sound and appearance. Upgrade your ride to the next level with an exhaust that has the pipes to put other Dodge Dart’s to shame. With this system your vehicle will be producing Moderate exterior and Mild interior sound levels while leaving other cars and trucks feeling envious at every stoplight. Exhaust kit 15181 features a cat-back layout that replaces your ride’s stock exhaust components from near the catalytic converter on back. Extensive 3D scanning during development has resulted in a direct-fit design that you can easily install yourself. 15181 is produced using CNC precision robotic manufacturing techniques and is backed by MagnaFlow’s 1-year limited finish warranty and limited lifetime construction warranty.User 1Installation InstructionsThis Part Fits: Year Make Model Submodel 2013-2016 Dodge Dart Aero 2013-2016 Dodge Dart GT 2013-2016 Dodge Dart Limited 2013 Dodge Dart R/T 2013 Dodge Dart Rallye 2013-2016 Dodge Dart SXT 2016 Dodge Dart SXT Sport

The MagnaFlow Ford Focus Street Series 15155 brings out the personality of your 2.0L 2013-2018 Ford Focus with our signature resonant, powerful engine tone and dyno-proven performance. Thanks to its fast-flowing, mandrel bent 2.5in. main piping and 2 Straight-Through mufflers ending in a Dual Center Rear exit with 4.5in. Polished Welded-Double Wall-Angle Cut-Rolled Edge tips, this Ford Focus exhaust kit has the performance chops to match its sporty sound and appearance. Upgrade your ride to the next level with an exhaust that has the pipes to put other Ford Focus’s to shame. With this system your vehicle will be producing Moderate exterior and Mild interior sound levels while leaving other cars and trucks feeling envious at every stoplight. Exhaust kit 15155 features a cat-back layout that replaces your ride’s stock exhaust components from near the catalytic converter on back. Extensive 3D scanning during development has resulted in a direct-fit design that you can easily install yourself. 15155 is produced using CNC precision robotic manufacturing techniques and is backed by MagnaFlow’s 1-year limited finish warranty and limited lifetime construction warranty.User 1Installation InstructionsThis Part Fits: Year Make Model Submodel 2013-2018 Ford Focus ST

The MagnaFlow Ford Mustang Race Series 15152 doesn’t leave any performance on the table with a race-ready, light weight, dyno-proven design ready to help your 5.0L 2013-2014 Ford Mustang take on any pretenders, whether on the track or the street. Exhaust kit 15152 is engineered to produce our powerful, resonant signature exhaust note at VeryAggressive exterior and Aggressive interior sound levels with an axle-back layout that replaces your vehicle’s exhaust components from near the rear axle on back. Please check to ensure compliance with local noise regulations. This Ford Mustang exhaust kit features fast-flowing mandrel bent 3in. diameter main piping that ends in a Dual Split Rear exit with 4in. Polished Welded-Double Wall-Angle Cut-Folded Edge tips. Extensive 3D scanning during development and the use of advanced CNC precision robotic manufacturing techniques ensures that 15152’s direct-fit design fits so perfectly that you can easily install the system yourself. The durable, corrosion resistant stainless steel construction of exhaust system 15152 is backed by MagnaFlow’s limited lifetime warranty.User 1Installation InstructionsThis Part Fits: Year Make Model Submodel 2013 Ford Mustang Boss 302 2013-2014 Ford Mustang GT

The MagnaFlow Ford Mustang Street Series 15149 brings out the personality of your 5.0L 2013-2014 Ford Mustang with our signature resonant, powerful engine tone and dyno-proven performance. Thanks to its fast-flowing, mandrel bent 3in. main piping and 2 Straight-Through mufflers ending in a Dual Split Rear exit with 4in. Polished Welded-Double Wall-Angle Cut-Folded Edge tips, this Ford Mustang exhaust kit has the performance chops to match its sporty sound and appearance. Upgrade your ride to the next level with an exhaust that has the pipes to put other Ford Mustang’s to shame. With this system your vehicle will be producing Moderate exterior and Mild interior sound levels while leaving other cars and trucks feeling envious at every stoplight. Exhaust kit 15149 features a cat-back layout that replaces your ride’s stock exhaust components from near the catalytic converter on back. Extensive 3D scanning during development has resulted in a direct-fit design that you can easily install yourself. 15149 is produced using CNC precision robotic manufacturing techniques and is backed by MagnaFlow’s 1-year limited finish warranty and limited lifetime construction warranty.User 1Installation InstructionsThis Part Fits: Year Make Model Submodel 2013 Ford Mustang Boss 302 2013-2014 Ford Mustang GT

The MagnaFlow Ford Mustang Race Series 15177 doesn’t leave any performance on the table with a race-ready, light weight, dyno-proven design ready to help your 5.8L 2013-2014 Ford Mustang take on any pretenders, whether on the track or the street. Exhaust kit 15177 is engineered to produce our powerful, resonant signature exhaust note at VeryAggressive exterior and Aggressive interior sound levels with an axle-back layout that replaces your vehicle’s exhaust components from near the rear axle on back. Please check to ensure compliance with local noise regulations. This Ford Mustang exhaust kit features fast-flowing mandrel bent 3in. diameter main piping that ends in a Quad Split Rear exit with 4in. Black Coated Welded-Double Wall-Angle Cut-Folded Edge tips. Extensive 3D scanning during development and the use of advanced CNC precision robotic manufacturing techniques ensures that 15177’s direct-fit design fits so perfectly that you can easily install the system yourself. The durable, corrosion resistant stainless-steel construction of exhaust system 15177 is backed by MagnaFlow’s 1-year finish warranty and limited lifetime warranty.User 1Installation InstructionsThis Part Fits: Year Make Model Submodel 2013-2014 Ford Mustang Shelby GT500

The MagnaFlow Ford Mustang Street Series 15151 brings enhanced engine sound and dyno-proven performance to your 5.0L 2013-2014 Ford Mustang with a healthy helping of our deep, resonant signature exhaust note at Moderate exterior and Mild interior sound levels. Thanks to its durable, corrosion resistant stainless steel design, this Ford Mustang exhaust system will handle whatever tarmac you decide to leave your mark on. This performance exhaust kit features an axle-back layout designed to replace your Ford Mustang’s exhaust system from near the rear axle on back. With its fast-flowing, mandrel bent 3in. main piping and 2 Straight-Through mufflers ending in a Dual Split Rear exit with 4in. Polished Welded-Double Wall-Angle Cut-Folded Edge tips, your ride will be sounding as awesome as it looks. Extensive 3D scanning during development has resulted in a direct-fit design that you can easily install yourself. 15151 is produced using CNC precision robotic manufacturing techniques and is backed by MagnaFlow’s 1-year limited finish warranty and limited lifetime construction warranty.User 1Installation InstructionsThis Part Fits: Year Make Model Submodel 2013 Ford Mustang Boss 302 2013-2014 Ford Mustang GT

The MagnaFlow Hyundai Veloster Street Series 15215 brings out the personality of your 1.6L 2013-2017 Hyundai Veloster with our signature resonant, powerful engine tone and dyno-proven performance. Thanks to its fast-flowing, mandrel bent 2.5in. main piping and 1 Straight-Through mufflers ending in a Dual Center Rear exit with 4in. Polished Double Wall-Angle Cut tips, this Hyundai Veloster exhaust kit has the performance chops to match its sporty sound and appearance. Upgrade your ride to the next level with an exhaust that has the pipes to put other Hyundai Veloster’s to shame. With this system your vehicle will be producing Moderate exterior and Mild interior sound levels while leaving other cars and trucks feeling envious at every stoplight. Exhaust kit 15215 features a cat-back layout that replaces your ride’s stock exhaust components from near the catalytic converter on back. Extensive 3D scanning during development has resulted in a direct-fit design that you can easily install yourself. 15215 is produced using CNC precision robotic manufacturing techniques and is backed by MagnaFlow’s 1-year limited finish warranty and limited lifetime construction warranty.User 1Installation InstructionsThis Part Fits: Year Make Model Submodel 2016 Hyundai Veloster Rally Edition 2013-2017 Hyundai Veloster Turbo 2014-2017 Hyundai Veloster Turbo R-Spec

The MagnaFlow Street Series 15157 brings out the personality of your Car with our signature resonant, powerful engine tone and dyno-proven performance. Thanks to its fast-flowing, mandrel bent 2.5in. main piping and 2 Straight-Through mufflers ending in a Dual Split Rear exit with 4in. Polished Welded-Double Wall-Angle Cut-Folded Edge tips, this Car exhaust kit has the performance chops to match its sporty sound and appearance. Upgrade your ride to the next level with an exhaust that has the pipes to put other Car’s to shame. With this system your vehicle will be producing Moderate exterior and Mild interior sound levels while leaving other cars and trucks feeling envious at every stoplight. Exhaust kit 15157 features a cat-back layout that replaces your ride’s stock exhaust components from near the catalytic converter on back. Extensive 3D scanning during development has resulted in a direct-fit design that you can easily install yourself. 15157 is produced using CNC precision robotic manufacturing techniques and is backed by MagnaFlow’s 1-year limited finish warranty and limited lifetime construction warranty.User 1Installation InstructionsThis Part Fits: Year Make Model Submodel 2013-2016 Scion FR-S Base 2013-2020,2022-2024 Subaru BRZ Limited 2013-2019,2022-2024 Subaru BRZ Premium 2015 Subaru BRZ Series.Blue 2019 Subaru BRZ Series.Gray 2016 Subaru BRZ Series.HyperBlue 2017 Subaru BRZ Series.Yellow 2018,2020 Subaru BRZ TS 2017-2020 Toyota 86 Base 2018-2020 Toyota 86 GT 2020 Toyota 86 Hakone Edition 2017 Toyota 86 Special Edition 2019 Toyota 86 TRD Special Edition 2023 Toyota GR86 10th Anniversary Special Edition 2022-2024 Toyota GR86 Base 2022-2024 Toyota GR86 Premium

The MagnaFlow Ford Fusion Street Series 15229 brings out the personality of your 1.5L, 1.6L 2013-2018 Ford Fusion with our signature resonant, powerful engine tone and dyno-proven performance. Thanks to its fast-flowing, mandrel bent 2.5in. main piping and 1 Straight-Through mufflers ending in a Single Straight Passenger Side Rear exit with 4in. Polished Welded-Double Wall-Angle Cut-Rolled Edge tips, this Ford Fusion exhaust kit has the performance chops to match its sporty sound and appearance. Upgrade your ride to the next level with an exhaust that has the pipes to put other Ford Fusion’s to shame. With this system your vehicle will be producing Moderate exterior and Mild interior sound levels while leaving other cars and trucks feeling envious at every stoplight. Exhaust kit 15229 features a cat-back layout that replaces your ride’s stock exhaust components from near the catalytic converter on back. Extensive 3D scanning during development has resulted in a direct-fit design that you can easily install yourself. 15229 is produced using CNC precision robotic manufacturing techniques and is backed by MagnaFlow’s 1-year limited finish warranty and limited lifetime construction warranty.User 1Installation InstructionsThis Part Fits: Year Make Model Submodel 2013-2018 Ford Fusion SE

Keep the check engine light off with MagnaFlow OEM Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 21-625. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow's state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency.This direct-fit catalytic converter is designed specifically for the 2013-2014 Ford Mustang and interchanges with OE part DR3Z-5F250-A. Hardware is included to eliminate the hassle of working with corroded factory parts. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with California or Federal/EPA Emission systems.This Part Fits: Year Make Model Submodel 2013-2014 Ford Mustang Shelby GT500

The MagnaFlow Toyota Tacoma Off Road Pro Series 17147 brings additional off-roading prowess and our deep signature exhaust note to your 4.0L 2013-2015 Toyota Tacoma with a weight-optimized, dyno-tested, corrosion resistant and durable stainless steel design engineered to closely hug the undercarriage for improved ground clearance. Exhaust kit 17147 is engineered to produce VeryAggressive exterior and Aggressive interior sound levels. Extensive 3D scanning was used during the development of this Toyota Tacoma exhaust system to create a direct-fit design, enabling a do-it-yourself installation process. 17147’s emissions-legal cat-back design replaces all your truck’s exhaust components from the catalytic converter on back with its 2.5in. diameter mandrel bent main piping that passes through 1 Straight-Through mufflers before ending in a turndown before rear axle exit with 3in. Satin Clamp-On-Single Wall-Turndown-Cut Edge tips. Exhaust system 17147 is produced using advanced CNC precision robotic manufacturing techniques and backed by MagnaFlow’s limited lifetime warranty.User 1Installation InstructionsThis Part Fits: Year Make Model Submodel 2013-2015 Toyota Tacoma Base 2013-2015 Toyota Tacoma Pre Runner 2015 Toyota Tacoma TRD Pro 2013 Toyota Tacoma X-Runner

The MagnaFlow BMW 320i Touring Series 15235 brings enhanced engine sound and dyno-proven performance to your 2.0L 2013-2018 BMW 320i with a healthy helping of our deep, resonant signature exhaust note at Moderate exterior and Mild interior sound levels. Thanks to its durable, corrosion resistant stainless steel design, this BMW 320i exhaust system will handle whatever tarmac you decide to leave your mark on. This performance exhaust kit features a crossmember-back layout designed to replace your BMW 320i’s exhaust system from the crossmember on back. With its fast-flowing, mandrel bent 2.5in. main piping and 2 Straight-Through muffler ending in a Single Straight Driver Side Rear exit with 3.5 Polished Welded-Double Wall-Angle Cut-Folded Edge tips, your muscle car will be sounding as awesome as it looks. Extensive 3D scanning during development has resulted in a direct-fit design that you can easily install yourself. 15235 is produced using CNC precision robotic manufacturing techniques and is backed by MagnaFlow’s limited lifetime construction warranty.User 1Installation InstructionsThis Part Fits: Year Make Model Submodel 2013-2018 BMW 320i Base 2013-2015,2018 BMW 320i xDrive Base

Keep the check engine light off with MagnaFlow OEM Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 21-250. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow's state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. Designed to fit the 2013-2019 Jeep Grand Cherokee and 2013-2018 Dodge Durango, this direct-fit catalytic converter also interchanges with OE parts 6811 0124AE and 6811 0124AB, among others. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with California or Federal/EPA Emission systems.This Part Fits: Year Make Model Submodel 2013-2018 Dodge Durango Citadel 2013 Dodge Durango Crew 2017-2018 Dodge Durango GT 2014-2016 Dodge Durango Limited 2014-2015 Dodge Durango Rallye 2013-2018 Dodge Durango Special Service 2013-2018 Dodge Durango SXT 2016 Jeep Grand Cherokee 75th Anniversary 2018-2019 Jeep Grand Cherokee Altitude 2018 Jeep Grand Cherokee High Altitude 2013-2019 Jeep Grand Cherokee Laredo 2013-2019 Jeep Grand Cherokee Limited 2013-2018 Jeep Grand Cherokee Overland 2014-2018 Jeep Grand Cherokee Summit 2017-2018 Jeep Grand Cherokee Trailhawk 2019 Jeep Grand Cherokee Upland

The MagnaFlow Street Series 15230 brings out the personality of your Car with our signature resonant, powerful engine tone and dyno-proven performance. Thanks to its fast-flowing, mandrel bent 2.5in. main piping and 2 Straight-Through mufflers ending in a Dual Split Rear exit, this Car exhaust kit has the performance chops to match its sporty sound and appearance. Upgrade your ride to the next level with an exhaust that has the pipes to put other Car’s to shame. With this system your vehicle will be producing Moderate exterior and Mild interior sound levels while leaving other cars and trucks feeling envious at every stoplight. Exhaust kit 15230 features a cat-back layout that replaces your ride’s stock exhaust components from near the catalytic converter on back. Extensive 3D scanning during development has resulted in a direct-fit design that you can easily install yourself. 15230 is produced using CNC precision robotic manufacturing techniques and is backed by MagnaFlow’s 1-year limited finish warranty and limited lifetime construction warranty.User 1Installation InstructionsThis Part Fits: Year Make Model Submodel 2017-2018 Ford Fusion Platinum 2013-2020 Ford Fusion SE 2019 Ford Fusion SEL 2013-2020 Ford Fusion Titanium 2013-2016,2019-2020 Lincoln MKZ Base 2015-2018 Lincoln MKZ Black Label 2017-2018 Lincoln MKZ Premiere 2017-2018,2020 Lincoln MKZ Reserve 2019 Lincoln MKZ Reserve I 2019 Lincoln MKZ Reserve II 2017-2018 Lincoln MKZ Select

Keep the check engine light off with MagnaFlow California Grade CARB Compliant Direct-Fit Catalytic Converter 5582703. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow's state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency.This direct-fit catalytic converter is designed specifically for the 2013-2015 Toyota Tacoma. The included gaskets & hardware reduce the possibility of a leaking seal while avoiding the need to reuse corroded factory parts for installation. This replacement part is designed to meet or exceed California Air Resource Board requirements, and has undergone additional testing to comply with CARB guidelines to allow for legal use in California and CARB restricted states, for the listed vehicles.This Part Fits: Year Make Model Submodel 2013-2015 Toyota Tacoma Base 2013-2015 Toyota Tacoma Pre Runner