This system feature Fabtech?s proven IFS technology with extended length ductile iron steering knuckles for proper Ford electronic stability control functionality. Heavy duty 1/4? thick steel lower control arm crossmembers provide superior ground clearance for adventurous offroad trails. Rear lift is accomplished with a 2.25? lift block and extended length u bolts. The Performance system includes Fabtech?s legendary stainless steel Dirt Logic 2.5 Coilover shocks for outstanding damping capacity with a great highway ride. Rear shocks include the Dirt Logic 2.25. This high quality system does not require drilling or cutting for installation and comes Fabtech?s 5/60 Powertrain warranty. 1/4? thick steel lower control arm crossmembers are arched for maximum ground clearance. Four adjustable alignment cams provide a wide range of adjustment. The fully welded box design of these crossmembers provides additional strength to the front suspension. Extended length ductile iron steering knuckles retain near stock track width keeping the tires under the fenders. These steering knuckles are designed to work in conjunction with the Ford ESC for proper functionality at all speeds. The Brake Line Brackets reposition the factory Ford brake lines down on the frame for the new travel range without having to open the brake system. Keeps factory fluid system intact. 1/4" thick steel drop brackets reposition the front sway bar for the increased ride height. This allows the sway bar link ends to fully cycle without binding throughout the extended travel range. 2.25" Tall rear lift blocks replace the factory blocks without changing the ride quality or load carrying capacity. American made U Bolts that retain the entire rear differential to the vehicle. A critical part that demands the best quality for your vehicle.This Part Fits: Year Make Model Submodel 2015-2020 Ford F-150 King Ranch 2015-2020 Ford F-150 Lariat 2016-2020 Ford F-150 Limited 2015-2020 Ford F-150 Platinum 2016-2020 Ford F-150 SSV 2015-2020 Ford F-150 XL 2015-2020 Ford F-150 XLT

This system feature Fabtech?s proven IFS technology with extended length ductile iron steering knuckles for proper Ford electronic stability control functionality. Heavy duty 1/4? thick steel lower control arm crossmembers provide superior ground clearance for adventurous offroad trails. Rear lift is accomplished with a 2.25? lift block and extended length u bolts.The Performance system includes Fabtech?s legendary stainless steel Dirt Logic 2.5 Coilover shocks for outstanding damping capacity with a great highway ride. Rear shocks include the Dirt Logic 2.25. This high quality system does not require drilling or cutting for installation and comes Fabtech?s 5/60 Powertrain warranty. 1/4? thick steel lower control arm crossmembers are arched for maximum ground clearance. Four adjustable alignment cams provide a wide range of adjustment. The fully welded box design of these crossmembers provides additional strength to the front suspension. Extended length ductile iron steering knuckles retain near stock track width keeping the tires under the fenders. These steering knuckles are designed to work in conjunction with the Ford ESC for proper functionality at all speeds. The Brake Line Brackets reposition the factory Ford brake lines down on the frame for the new travel range without having to open the brake system. Keeps factory fluid system intact. 1/4" thick steel drop brackets reposition the front sway bar for the increased ride height. This allows the sway bar link ends to fully cycle without binding throughout the extended travel range. 2.25" Tall rear lift blocks replace the factory blocks without changing the ride quality or load carrying capacity. American made U Bolts that retain the entire rear differential to the vehicle. A critical part that demands the best quality for your vehicle.This Part Fits: Year Make Model Submodel 2015-2020 Ford F-150 King Ranch 2015-2020 Ford F-150 Lariat 2016-2020 Ford F-150 Limited 2015-2020 Ford F-150 Platinum 2016-2020 Ford F-150 SSV 2015-2020 Ford F-150 XL 2015-2020 Ford F-150 XLT

This system feature Fabtech?s proven IFS technology with extended length ductile iron steering knuckles for proper Ford electronic stability control functionality. Heavy duty 1/4? thick steel lower control arm crossmembers provide superior ground clearance for adventurous offroad trails. Rear lift is accomplished with a 2.25? lift block and extended length u bolts. The Basic System includes front coilover spacers that utilize the factory Coilover shocks for a stock like ride characteristic. This high quality system does not require drilling or cutting for installation and comes Fabtech?s 5/60 Powertrain warranty. 1/4? thick steel lower control arm crossmembers are arched for maximum ground clearance. Four adjustable alignment cams provide a wide range of adjustment. The fully welded box design of these crossmembers provides additional strength to the front suspension. Extended length ductile iron steering knuckles retain near stock track width keeping the tires under the fenders. These steering knuckles are designed to work in conjunction with the Ford ESC for proper functionality at all speeds. Thick wall tubing and 1/4" thick steel plate is used to build these 4? lift spacers that retain the factory Coilover shocks for a stock ride. Brake Line Brackets reposition the factory Ford brake lines down on the frame for the new travel range without having to open the brake system. Keeps factory fluid system intact. 1/4" thick steel drop brackets reposition the front sway bar for the increased ride height. This allows the sway bar link ends to fully cycle without binding throughout the extended travel range. 5" Tall rear lift blocks replace the factory blocks without changing the ride quality or load carrying capacity. American made U Bolts that retain the entire rear differential to the vehicle. In the rear, extended length Performance twin tube shocks provide a good highway ride with the ability to tackle offroad.This Part Fits: Year Make Model Submodel 2015-2020 Ford F-150 King Ranch 2015-2020 Ford F-150 Lariat 2016-2020 Ford F-150 Limited 2015-2020 Ford F-150 Platinum 2016-2020 Ford F-150 SSV 2015-2020 Ford F-150 XL 2015-2020 Ford F-150 XLT

This system feature Fabtech?s proven IFS technology with extended length ductile iron steering knuckles for proper Ford electronic stability control functionality. Heavy duty 1/4? thick steel lower control arm crossmembers provide superior ground clearance for adventurous offroad trails. Rear lift is accomplished with a 2.25? lift block and extended length u bolts. The Basic System includes front coilover spacers that utilize the factory Coilover shocks for a stock like ride characteristic. This high quality system does not require drilling or cutting for installation and comes Fabtech?s 5/60 Powertrain warranty. 1/4? thick steel lower control arm crossmembers are arched for maximum ground clearance. Four adjustable alignment cams provide a wide range of adjustment. The fully welded box design of these crossmembers provides additional strength to the front suspension. Extended length ductile iron steering knuckles retain near stock track width keeping the tires under the fenders. These steering knuckles are designed to work in conjunction with the Ford ESC for proper functionality at all speeds. Thick wall tubing and 1/4" thick steel plate is used to build these 4? lift spacers that retain the factory Coilover shocks for a stock ride. Brake Line Brackets reposition the factory Ford brake lines down on the frame for the new travel range without having to open the brake system. Keeps factory fluid system intact. 1/4" thick steel drop brackets reposition the front sway bar for the increased ride height. This allows the sway bar link ends to fully cycle without binding throughout the extended travel range. 5" Tall rear lift blocks replace the factory blocks without changing the ride quality or load carrying capacity. American made U Bolts that retain the entire rear differential to the vehicle. In the rear, extended length monotube Stealth shocks have a Nitrocarb piston rod for corrosion resistance and resist rock chipping.This Part Fits: Year Make Model Submodel 2015-2020 Ford F-150 King Ranch 2015-2020 Ford F-150 Lariat 2016-2020 Ford F-150 Limited 2015-2020 Ford F-150 Platinum 2016-2020 Ford F-150 SSV 2015-2020 Ford F-150 XL 2015-2020 Ford F-150 XLT

This system feature Fabtech?s proven IFS technology with extended length ductile iron steering knuckles for proper Ford electronic stability control functionality. Heavy duty 1/4? thick steel lower control arm crossmembers provide superior ground clearance for adventurous offroad trails. Rear lift is accomplished with a 2.25? lift block and extended length u bolts. The Performance system includes Fabtech?s legendary stainless steel Dirt Logic 2.5 Coilover shocks for outstanding damping capacity with a great highway ride. Rear shocks include the Dirt Logic 2.25. This high quality system does not require drilling or cutting for installation and comes Fabtech?s 5/60 Powertrain warranty. 1/4? thick steel lower control arm crossmembers are arched for maximum ground clearance. Four adjustable alignment cams provide a wide range of adjustment. The fully welded box design of these crossmembers provides additional strength to the front suspension. Extended length ductile iron steering knuckles retain near stock track width keeping the tires under the fenders. These steering knuckles are designed to work in conjunction with the Ford ESC for proper functionality at all speeds. The Brake Line Brackets reposition the factory Ford brake lines down on the frame for the new travel range without having to open the brake system. Keeps factory fluid system intact. 1/4" thick steel drop brackets reposition the front sway bar for the increased ride height. This allows the sway bar link ends to fully cycle without binding throughout the extended travel range. 5" Tall rear lift blocks replace the factory blocks without changing the ride quality or load carrying capacity. American made U Bolts that retain the entire rear differential to the vehicle. A critical part that demands the best quality for your vehicle.This Part Fits: Year Make Model Submodel 2015-2020 Ford F-150 King Ranch 2015-2020 Ford F-150 Lariat 2016-2020 Ford F-150 Limited 2015-2020 Ford F-150 Platinum 2016-2020 Ford F-150 SSV 2015-2020 Ford F-150 XL 2015-2020 Ford F-150 XLT

This system feature Fabtech?s proven IFS technology with extended length ductile iron steering knuckles for proper Ford electronic stability control functionality. Heavy duty 1/4? thick steel lower control arm crossmembers provide superior ground clearance for adventurous offroad trails. Rear lift is accomplished with a 2.25? lift block and extended length u bolts. The Performance system includes Fabtech?s legendary stainless steel Dirt Logic 2.5 Coilover shocks for outstanding damping capacity with a great highway ride. Rear shocks include the Dirt Logic 2.25. This high quality system does not require drilling or cutting for installation and comes Fabtech?s 5/60 Powertrain warranty. 1/4? thick steel lower control arm crossmembers are arched for maximum ground clearance. Four adjustable alignment cams provide a wide range of adjustment. The fully welded box design of these crossmembers provides additional strength to the front suspension. Extended length ductile iron steering knuckles retain near stock track width keeping the tires under the fenders. These steering knuckles are designed to work in conjunction with the Ford ESC for proper functionality at all speeds. Brake Line Brackets reposition the factory Ford brake lines down on the frame for the new travel range without having to open the brake system. Keeps factory fluid system intact. 1/4" thick steel drop brackets reposition the front sway bar for the increased ride height. This allows the sway bar link ends to fully cycle without binding throughout the extended travel range. 5" Tall rear lift blocks replace the factory blocks without changing the ride quality or load carrying capacity. American made U Bolts that retain the entire rear differential to the vehicle. A critical part that demands the best quality for your vehicle.This Part Fits: Year Make Model Submodel 2015-2020 Ford F-150 King Ranch 2015-2020 Ford F-150 Lariat 2016-2020 Ford F-150 Limited 2015-2020 Ford F-150 Platinum 2016-2020 Ford F-150 SSV 2015-2020 Ford F-150 XL 2015-2020 Ford F-150 XLT

Fabtech Leveling Kits provide a small amount of lift for the front of the vehicle. This will typically help to level the stance of the vehicle's ride height front to rear as compared to the nose down appearance from the factory. With the added ride height it allows for the installation of larger tires and wheels for a more aggressive look. The installation of the kit is typically very simple and can be done with basic hand tools. There is no modification of the vehicle required for installation and can be returned back to stock if needed. All Fabtech Leveling Kits have undergone extensive engineering to properly function without placing the ball joints and tie rods into bind. This is an important feature as some taller kits on the market create bind and can result in failure of those parts over time. Fabtech offers an exclusive Trade Up program on all their Leveling Kits. If you ever want to step up to a complete 4'' or 6'' Fabtech'suspension system after you buy a Leveling Kit, you can trade in the previously purchased kit towards the price of a new Fabtech'system. Please see program details. All Fabtech Leveling Kits come with a free 5 year 60,000 mile Powertrain warranty. Please see program details.This Part Fits: Year Make Model Submodel 2015-2023 Ford F-150 King Ranch 2015-2023 Ford F-150 Lariat 2016-2023 Ford F-150 Limited 2015-2023 Ford F-150 Platinum 2018-2023 Ford F-150 Police Responder 2022 Ford F-150 Raptor 2016-2023 Ford F-150 SSV 2021-2023 Ford F-150 Tremor 2015-2023 Ford F-150 XL 2015-2023 Ford F-150 XLT

System Features & Benefits - Arms eliminate upper ball joint w/ super strong 1? ID Stainless American Uniball. Allows for increased wheel travel when used with Dirt Logic 2.5 Coilover shocks. Chromoly tubing reduces flex found in stock arms for more positive road feel. 17-4 Stainless Steel Heat treated Uniball pin fits into factory ball joint taper without modification to the spindle for easy return to stock feature. Arms are direct replacements for factory arms on suspensions that require additional strength and align ability. Material Construction Specs - Built with same materials as found on Trophy Trucks. .120? Wall 4130 Chromoly Tubing. 1.25? OD. .250? wall DOM Bushing Barrels. 1? ID Stainless Steel American Uniball. 17-4 Stainless Misalignments. Heat Treated 17-4 Stainless Steel Tapered Uniball Pins.This Part Fits: Year Make Model Submodel 2015-2020 Ford F-150 King Ranch 2015-2020 Ford F-150 Lariat 2016-2020 Ford F-150 Limited 2015-2020 Ford F-150 Platinum 2016-2020 Ford F-150 SSV 2015-2020 Ford F-150 XL 2015-2020 Ford F-150 XLT

System Features & Benefits - Arms eliminate upper ball joint w/ super strong 1? ID Stainless American Uniball. - Allows for increased wheel travel when used with Dirt Logic 2.5 Coilover shocks. - Chromoly tubing reduces flex found in stock arms for more positive road feel. - 17-4 Stainless Steel Heat treated Uniball pin fits into factory ball joint taper without modification to the spindle for easy return to stock feature. - Arms are direct replacements for factory arms on suspensions that require additional strength and align ability. - Built with same materials as found on Trophy Trucks. - .120? Wall 4130 Chromoly Tubing. 1.25? OD. - .250? wall DOM Bushing Barrels. - 1? ID Stainless Steel American Uniball. - 17-4 Stainless Misalignments. - Heat Treated 17-4 Stainless Steel Tapered Uniball Pins.This Part Fits: Year Make Model Submodel 2015-2020 Ford F-150 King Ranch 2015-2020 Ford F-150 Lariat 2016-2020 Ford F-150 Limited 2015-2020 Ford F-150 Platinum 2016-2020 Ford F-150 SSV 2015-2020 Ford F-150 XL 2015-2020 Ford F-150 XLT

Fabtech's new 4'' F150 system utilizes their proven heavy duty construction and design features found in our 6'' systems but with less lift and at a much lower price. This 4'' Systems allows use of 35'' tall tires and features high arched lower control arm crossmembers constructed of 1/4 “ thick steel for maximum strength. The Fabtech ductile iron steering knuckles retain the stock track width keeping the tires under the fender for a clean appearance. Rear lift is accomplished with a block and u bolt configuration. The Basic System includes heavy duty front Coilover shocks for increased dampening capacity while retaining the factory coil springs. Rear shocks include Fabtech's Performance or Stealth shocks.This Part Fits: Year Make Model Submodel 2015-2020 Ford F-150 King Ranch 2015-2020 Ford F-150 Lariat 2016-2020 Ford F-150 Limited 2015-2020 Ford F-150 Platinum 2016-2020 Ford F-150 SSV 2015-2020 Ford F-150 XL 2015-2020 Ford F-150 XLT

Fabtech's new 4'' F150 system utilizes their proven heavy duty construction and design features found in our 6'' systems but with less lift and at a much lower price. This 4'' Systems allows use of 35'' tall tires and features high arched lower control arm crossmembers constructed of 1/4 “ thick steel for maximum strength. The Fabtech ductile iron steering knuckles retain the stock track width keeping the tires under the fender for a clean appearance. Rear lift is accomplished with a block and u bolt configuration. The Basic System includes heavy duty front Coilover shocks for increased dampening capacity while retaining the factory coil springs. Rear shocks include Fabtech's Performance or Stealth shocks.This Part Fits: Year Make Model Submodel 2015-2020 Ford F-150 King Ranch 2015-2020 Ford F-150 Lariat 2016-2020 Ford F-150 Limited 2015-2020 Ford F-150 Platinum 2016-2020 Ford F-150 SSV 2015-2020 Ford F-150 XL 2015-2020 Ford F-150 XLT

Fabtech's new 4'' F150 system utilizes their proven heavy duty construction and design features found in our 6'' systems but with less lift and at a much lower price. This 4'' Systems allows use of 35'' tall tires and features high arched lower control arm crossmembers constructed of 1/4 “ thick steel for maximum strength. The Fabtech ductile iron steering knuckles retain the stock track width keeping the tires under the fender for a clean appearance. Rear lift is accomplished with a block and u bolt configuration. The Performance System features Dirt Logic Stainless Steel 2.5 Coilover front shocks and Dirt Logic Stainless Steel 2.25 rear shocks for aggressive offroad capabilities with a smooth highway ride.This Part Fits: Year Make Model Submodel 2015-2020 Ford F-150 King Ranch 2015-2020 Ford F-150 Lariat 2016-2020 Ford F-150 Limited 2015-2020 Ford F-150 Platinum 2016-2020 Ford F-150 SSV 2015-2020 Ford F-150 XL 2015-2020 Ford F-150 XLT

Fabtech's new 4'' F150 system utilizes their proven heavy duty construction and design features found in our 6'' systems but with less lift and at a much lower price. This 4'' Systems allows use of 35'' tall tires and features high arched lower control arm crossmembers constructed of 1/4 thick steel for maximum strength. The Fabtech ductile iron steering knuckles retain the stock track width keeping the tires under the fender for a clean appearance. Rear lift is accomplished with a block and u bolt configuration. The Performance System features Dirt Logic Stainless Steel 2.5 Coilover front shocks and Dirt Logic Stainless Steel 2.25 rear shocks for aggressive offroad capabilities with a smooth highway ride.This Part Fits: Year Make Model Submodel 2015-2020 Ford F-150 King Ranch 2015-2020 Ford F-150 Lariat 2016-2020 Ford F-150 Limited 2015-2020 Ford F-150 Platinum 2016-2020 Ford F-150 SSV 2015-2020 Ford F-150 XL 2015-2020 Ford F-150 XLT

In cooperation with Ford Motor Company, Fabtech has developed this 6'' Suspension Systems for the all new 2015 F150. This new system includes heavy duty 1/4'' thick steel lower control arm crossmembers with an integrated front differential skid plate for protection and increased front suspension strength. This is an important construction feature to properly handle large tires on and offroad. Fabtech's extended length ductile iron steering knuckles allow use of 18'', 20'' or 22'' wheels. The Basic System includes front spacers utilizing the factory Coilover shocks to retain the stock ride while the rear receives Fabtech Performance twin tube shocks. Estimated installation time - 5 hrs. Zero holes to drill for installation. No welding required. Some cutting required. No driveshaft modification required.This Part Fits: Year Make Model Submodel 2015-2020 Ford F-150 King Ranch 2015-2020 Ford F-150 Lariat 2016-2020 Ford F-150 Limited 2015-2020 Ford F-150 Platinum 2016-2020 Ford F-150 SSV 2015-2020 Ford F-150 XL 2015-2020 Ford F-150 XLT

In cooperation with Ford Motor Company, Fabtech has developed this 6'' Suspension Systems for the all new 2015 F150. This new system includes heavy duty 1/4'' thick steel lower control arm crossmembers with an integrated front differential skid plate for protection and increased front suspension strength. This is an important construction feature to properly handle large tires on and offroad. Fabtech's extended length ductile iron steering knuckles allow use of 18'', 20'' or 22'' wheels. The Basic System includes front spacers utilizing the factory Coilover shocks to retain the stock ride while the rear receives Fabtech Performance twin tube shocks. Estimated installation time - 5 hrs. Zero holes to drill for installation. No welding required. Some cutting required. No driveshaft modification required.This Part Fits: Year Make Model Submodel 2015-2020 Ford F-150 King Ranch 2015-2020 Ford F-150 Lariat 2016-2020 Ford F-150 Limited 2015-2020 Ford F-150 Platinum 2016-2020 Ford F-150 SSV 2015-2020 Ford F-150 XL 2015-2020 Ford F-150 XLT

In cooperation with Ford Motor Company, Fabtech has developed this 6'' Suspension Systems for the all new 2015 F150. This new system includes heavy duty 1/4'' thick steel lower control arm crossmembers with an integrated front differential skid plate for protection and increased front suspension strength. This is an important construction feature to properly handle large tires on and offroad. Fabtech's extended length ductile iron steering knuckles allow use of 18'', 20'' or 22'' wheels. The Performance System comes with Dirt Logic 2.5 Stainless Steel Coilovers featuring Eibach coil springs in the front and Dirt Logic Stainless Steel 2.25's in the rear for aggressive offroad driving. Estimated installation time - 5 hrs. Zero holes to drill for installation. No welding required. Some cutting required. No driveshaft modification required.This Part Fits: Year Make Model Submodel 2015-2020 Ford F-150 King Ranch 2015-2020 Ford F-150 Lariat 2016-2020 Ford F-150 Limited 2015-2020 Ford F-150 Platinum 2016-2020 Ford F-150 SSV 2015-2020 Ford F-150 XL 2015-2020 Ford F-150 XLT

Fabtechs development capabilities are second to none with over 20 years of experience in aftermarket suspension design. State of the art software, fabrication equipment along with our seasoned engineers and fabricators allow the company to develop products that are constantly on the cutting edge. Fabtech has received numerous awards for our designs that continue to lead the market. Proper design in suspension development is key in providing a quality, trouble free product to the end consumer. Fabtech leads the industry with extensive research, design technology and rigorous testing that results in the highest performing, finest quality suspension system for the discerning offroad enthusiast.This Part Fits: Year Make Model Submodel 2015-2020 Ford F-150 King Ranch 2015-2020 Ford F-150 Lariat 2016-2020 Ford F-150 Limited 2015-2020 Ford F-150 Platinum 2016-2020 Ford F-150 SSV 2015-2020 Ford F-150 XL 2015-2020 Ford F-150 XLT

The front suspension of a Sprinter van utilizes a MacPherson strut to provide damping. The stock struts leave a lot to be desired on their own once you upfit the van for overland use or haul cargo. Fabtech offers a solution to this problem by utilizing a Bilstein strut with their high-quality cold wound coil spring. The coil springs are positioned around the strut bodies. They provide an additional lift to the vehicle of 1 in.-1.5 in. over stock. This creates increased ground clearance and clearance of larger tires for off-road use. Additionally, they help reduce sway for vans with full interior build-outs or hauling heavy cargo. The coil springs utilize billet aluminum upper and lower coils seats that slide over the strut. They are positioned to the correct ride height and create a secure mounting for the springs. To further enhance the vehicle's suspension Fabtech recommends their Auxiliary Front Shock Mounts with Dirt Logic 2.25 shocks for a complete upgrade. This combination will help improve the ride characteristics of the vehicle well beyond stock. It will provide a very compliant highway ride while improving performance for off-highway use.This Part Fits: Year Make Model Submodel 2015-2021 Mercedes-Benz Sprinter 2500 Base

The front suspension of a Sprinter van utilizes a MacPherson strut to provide damping. The stock struts leave a lot to be desired on their own once you upfit the van for overland use or haul cargo. Fabtech offers a solution to this problem by utilizing a Bilstein strut with their high-quality cold wound coil spring. The coil springs are positioned around the strut bodies. They provide an additional lift to the vehicle of 1 in.-1.5 in. over stock. This creates increased ground clearance and clearance of larger tires for off-road use. Additionally, they help reduce sway for vans with full interior build-outs or hauling heavy cargo. The coil springs utilize billet aluminum upper and lower coils seats that slide over the strut. They are positioned to the correct ride height and create a secure mounting for the springs. To further enhance the vehicle's suspension Fabtech has also developed an Auxiliary Front Shock kit for a complete upgrade. The kit adds two high-quality Fabtech built Dirt Logic 2.25 shocks with valving specific to the Sprinter van. The valving will provide a superior ride quality for both loaded and unloaded vans. The Dirt Logic 2.25 shocks are constructed with a stainless steel bodies that provide maximum corrosion resistance in all conditions. These heavy-duty auxiliary shock mounts are built with 1/4 in. thick steel and attach to the suspension subframe only. There is no attachment to the unibody structure. This type of mounting is vastly superior to other shock kits that mount to the unibody. By mounting to the subframe this helps isolate road noise and eliminates potential stress to the unibody. With only two holes to drill for installation, it takes about 1-2 hours with no removal of the interior required. This Sprinter van coil assist kit and auxiliary shocks are the perfect upgrade for Sprinter owners looking for increased suspension damping for highway and offroad trails.This Part Fits: Year Make Model Submodel 2015-2021 Mercedes-Benz Sprinter 2500 Base

Sprinter vans that have been upfitted for overlanding and/or carrying additional cargo weight often need more damping capacity than what the factory front struts, and rear shocks can provide. Fabtech addresses this problem with their heavy-duty auxiliary shock kit and Dirt Logic 2.25 shocks. The kit retains the factory front struts and adds two high quality Fabtech built Dirt Logic 2.25 shocks with valving specific to the Sprinter van. The valving will provide a superior ride quality for both loaded and unloaded vans. The Dirt Logic 2.25 shocks are constructed with stainless steel bodies that provide maximum corrosion resistance in all conditions. These heavy-duty auxiliary shock mounts are built with 1/4 in. thick steel and attach to the suspension subframe only. There is no attachment to the unibody structure. This type of mounting is vastly superior to other shock kits that mount to the unibody. By mounting to the subframe it helps isolate road noise and eliminates potential stress to the unibody. With only two holes to drill for installation it takes about 1-2 hours with no removal of the interior required. This Sprinter van auxiliary shock kit and Dirt Logic 2.25 shocks are the perfect upgrade for Sprinter owners looking for increased suspension damping for highway and offroad trails.This Part Fits: Year Make Model Submodel 2015-2021 Mercedes-Benz Sprinter 2500 Base

Sprinter vans that have been upfitted for overlanding and /or carrying additional cargo weight often need more damping capacity than what the factory struts and shocks can provide. Fabtech addresses this problem with our heavy-duty auxiliary shock kit. These heavy-duty front auxiliary shock mounts are built with 1/4 in. thick steel and attach to the suspension subframe only. There is no attachment to the unibody structure. This type of mounting is vastly superior to other shock kits that mount to the unibody. By mounting to the subframe it helps isolate road noise and eliminates potential stress to the unibody. With only two holes to drill for installation it takes about 1-2 hours with no removal of the interior required.This Part Fits: Year Make Model Submodel 2015-2021 Mercedes-Benz Sprinter 2500 Base

Experience next-level performance with the Fabtech Upper Control Arm Kit, designed exclusively for Toyota Tacoma 2WD/4WD models (6 Lug, 2015–2023) to provide exceptional off-road durability and improved on-road handling. This kit is engineered to meet the challenges of both rugged trails and smooth highways.Key Technical Features 4130 Chromoly tubing with a .120 in wall and 1.250 in OD for outstanding strength American-made 1 in FK Stainless PTFE-lined Uniballs 17-4 Stainless Steel heat-treated Uniball pins for a precise fit Engineered misalignments to ensure proper clearance throughout travel Additional caster built into the design for better alignment with oversized tires High-quality urethane bushings that reduce road noise and extend lifespan Compatible with both stock and lifted suspension systems Benefits You’ll Love Increased suspension strength for demanding off-road use Superior on-road performance with simple return-to-stock compatibility (no spindle modification required) Fitment:• 2015 Toyota Tacoma Base• 2016–2023 Toyota Tacoma Limited, SR, SR5, TRD Off-Road, TRD Sport, Pre Runner, TRD Pro, Trail, Trail Special EditionEnjoy a straightforward installation process backed by 24/7 expert support and informative installation videos, making your upgrade smooth and hassle-free. Ready to enhance your ride? Explore additional parts for your Toyota Tacoma in our Toyota Tacoma 2016-2023 Parts collection and experience the Fabtech performance difference today.

Sprinter vans that have been upfitted for overlanding and /or carrying additional cargo weight often need more damping capacity than what the factory struts and shocks can provide. Fabtech addresses this problem with our heavy-duty auxiliary shock kit. These heavy-duty front auxiliary shock mounts are built with 1/4 in. thick steel and attach to the suspension subframe only. There is no attachment to the unibody structure. This type of mounting is vastly superior to other shock kits that mount to the unibody. By mounting to the subframe it helps isolate road noise and eliminates potential stress to the unibody. With only two holes to drill for installation it takes about 1-2 hours with no removal of the interior required.This Part Fits: Year Make Model Submodel 2015-2021 Mercedes-Benz Sprinter 2500 Base 2015-2021 Mercedes-Benz Sprinter 3500 Base

The front suspension of a Sprinter van utilizes a MacPherson strut to provide damping. The stock struts leave a lot to be desired on their own once you upfit the van for overland use or haul cargo. Fabtech offers a solution to this problem by utilizing a Bilstein strut with their high-quality cold wound coil spring. The coil springs are positioned around the strut bodies. They provide an additional lift to the vehicle of 1 in.-1.5 in. over stock. This creates increased ground clearance and clearance of larger tires for off-road use. Additionally, they help reduce sway for vans with full interior build-outs or hauling heavy cargo. The coil springs utilize billet aluminum upper and lower coils seats that slide over the strut. They are positioned to the correct ride height and create a secure mounting for the springs. To further enhance the vehicles suspension Fabtech recommends their Auxiliary Front Shock Mounts with Dirt Logic 2.25 shocks for a complete upgrade. This combination will help improve the ride characteristics of the vehicle well beyond stock. It will provide a very compliant highway ride while improving performance for off-highway use.This Part Fits: Year Make Model Submodel 2015-2021 Mercedes-Benz Sprinter 2500 Base 2015-2021 Mercedes-Benz Sprinter 3500 Base

The front suspension of a Sprinter van utilizes a MacPherson strut to provide damping. The stock struts leave a lot to be desired on their own once you upfit the van for overland use or haul cargo. Fabtech offers a solution to this problem by utilizing a Bilstein strut with their high-quality cold wound coil spring. The coil springs are positioned around the strut bodies. They provide an additional lift to the vehicle of 1 in.-1.5 in. over stock. This creates increased ground clearance and clearance of larger tires for off-road use. Additionally, they help reduce sway for vans with full interior build-outs or hauling heavy cargo. The coil springs utilize billet aluminum upper and lower coils seats that slide over the strut. They are positioned to the correct ride height and create a secure mounting for the springs. To further enhance the vehicles suspension Fabtech recommends their Auxiliary Front Shock Mounts with Dirt Logic 2.25 shocks for a complete upgrade. This combination will help improve the ride characteristics of the vehicle well beyond stock. It will provide a very compliant highway ride while improving performance for off-highway use.This Part Fits: Year Make Model Submodel 2015-2021 Mercedes-Benz Sprinter 2500 Base 2015-2021 Mercedes-Benz Sprinter 3500 Base

Dirt Logic 2.25's are designed to replace factory shocks with a larger, more robust configuration. The 2.25 size is what separates it from other replacement take apart shocks for a superior ride, both on and off road. Shocks are pretuned for each Fabtech suspension, accounting for larger tires, providing the finest all around damping.This Part Fits: Year Make Model Submodel 2015-2021 Mercedes-Benz Sprinter 2500 Base 2015-2021 Mercedes-Benz Sprinter 3500 Base

Dirt Logic 2.25's are designed to replace factory shocks with a larger, more robust configuration. The 2.25 size is what separates it from other replacement take apart shocks for a superior ride, both on and off road. Shocks are pretuned for each Fabtech suspension, accounting for larger tires, providing the finest all around damping.This Part Fits: Year Make Model Submodel 2015-2021 Mercedes-Benz Sprinter 2500 Base 2015-2021 Mercedes-Benz Sprinter 3500 Base

Fabtechs development capabilities are second to none with over 20 years of experience in aftermarket suspension design. State of the art software, fabrication equipment along with our seasoned engineers and fabricators allow the company to develop products that are constantly on the cutting edge. Fabtech has received numerous awards for our designs that continue to lead the market. Proper design in suspension development is key in providing a quality, trouble free product to the end consumer. Fabtech leads the industry with extensive research, design technology and rigorous testing that results in the highest performing, finest quality suspension system for the discerning offroad enthusiast.This Part Fits: Year Make Model Submodel 2015-2021 Mercedes-Benz Sprinter 2500 Base

Wheel Spacer; 1.5 in. Lift; Front Hub; For PN[K9007/K9007DL/K9008/K9009/K9010/K9010DL/K9011DL/K9012/K9012DL/K9013];This Part Fits: Year Make Model Submodel 2015-2021 Mercedes-Benz Sprinter 2500 Base 2015-2021 Mercedes-Benz Sprinter 3500 Base

Fabtechs development capabilities are second to none with over 20 years of experience in aftermarket suspension design. State of the art software, fabrication equipment along with our seasoned engineers and fabricators allow the company to develop products that are constantly on the cutting edge. Fabtech has received numerous awards for our designs that continue to lead the market. Proper design in suspension development is key in providing a quality, trouble free product to the end consumer. Fabtech leads the industry with extensive research, design technology and rigorous testing that results in the highest performing, finest quality suspension system for the discerning offroad enthusiast.This Part Fits: Year Make Model Submodel 2015-2021 Mercedes-Benz Sprinter 2500 Base

Wheel Spacer; Front Kit; 1.5 in. Lift; For PN[K9000/K9000DL/K9001DL/K9002/K9003/K9003DL/K9004DL/K9005/K9005DL/K9006];This Part Fits: Year Make Model Submodel 2015-2021 Mercedes-Benz Sprinter 2500 Base

Fabtechs development capabilities are second to none with over 20 years of experience in aftermarket suspension design. State of the art software, fabrication equipment along with our seasoned engineers and fabricators allow the company to develop products that are constantly on the cutting edge. Fabtech has received numerous awards for our designs that continue to lead the market. Proper design in suspension development is key in providing a quality, trouble free product to the end consumer. Fabtech leads the industry with extensive research, design technology and rigorous testing that results in the highest performing, finest quality suspension system for the discerning offroad enthusiast.This Part Fits: Year Make Model Submodel 2015-2021 Mercedes-Benz Sprinter 3500 Base

Fabtechs development capabilities are second to none with over 20 years of experience in aftermarket suspension design. State of the art software, fabrication equipment along with our seasoned engineers and fabricators allow the company to develop products that are constantly on the cutting edge. Fabtech has received numerous awards for our designs that continue to lead the market. Proper design in suspension development is key in providing a quality, trouble free product to the end consumer. Fabtech leads the industry with extensive research, design technology and rigorous testing that results in the highest performing, finest quality suspension system for the discerning offroad enthusiast.This Part Fits: Year Make Model Submodel 2015-2021 Mercedes-Benz Sprinter 3500 Base

From the most trusted name in properly engineered suspension systems and shocks Fabtech announces their line of Leveling Kits for 2015. In the development of these products Fabtech designed and tested multiple heights of Leveling Kits for each application. The Kits listed by Fabtech are the tallest you can safely use without ball joint, tie rod or steering bind. Fabtech Leveling Kits are so well engineered they offer a free 5 Year 60,000 Mile Powertrain Warranty. As an industry exclusive Fabtech offers a Trade Up program for its Leveling Kits. A consumer buys a Fabtech Leveling Kit now and then can trade up the original purchase amount later when buying a new Fabtech Suspension System.This Part Fits: Year Make Model Submodel 2016-2018 Nissan TITAN XD Platinum Reserve 2016-2018 Nissan TITAN XD PRO-4X 2016-2018 Nissan TITAN XD S 2016-2018 Nissan TITAN XD SL 2016-2018 Nissan TITAN XD SV

2016-18 Nissan Titan XD 4WD - Fits 0-6in Lifts. Fabtech's Uniball Upper Control Arms are designed to replace the factory ball joint arms to strengthen the front suspension for aggressive offroad use. The tubular Upper Control Arms feature 1.25in OD, .120in wall thick chromoly tube construction with 1in diameter Stainless Steel Uniballs that attach to the factory spindle without drilling. These Uniball Upper Control Arms have been designed to work in conjunction with the stock suspension, or as an add-on to Fabtech's 2in and 6in systems. Features: Built with same materials as found on Trophy Trucks. 120in Wall 4130 Chromoly Tubing. 1.25in OD. 250in wall DOM Bushing Barrels. PTFE lined 1in ID Stainless Steel American Uniball. 17-4 Stainless Misalignments. Heat Treated 17-4 Stainless Steel Tapered Uniball Pins. Uniball Upper Control Arms.This Part Fits: Year Make Model Submodel 2016-2017 Nissan TITAN XD Platinum Reserve 2016-2017 Nissan TITAN XD PRO-4X 2016-2017 Nissan TITAN XD S 2016-2017 Nissan TITAN XD SL 2016-2017 Nissan TITAN XD SV

This complete shock system replaces the factory units with high end Dirt Logic stainless steel shocks for outstanding performance. The front Dirt Logic 2.5 is adjustable to provide 2? of lift over the factory ride height. The rear shocks are upgraded to the Dirt Logic 2.25. These Dirt Logic shocks are a considerable improvement compared to factory units that will provide outstanding damping for aggressive offroad use with a great highway ride. Stainless Steel body for maximum corrosion resistance. Nitrocarb piston rod resists rock chips for longevity. Eibach coil springs for excellent ride quality. Billet aluminum end caps. Rebuildable design.This Part Fits: Year Make Model Submodel 2017 Nissan TITAN Platinum Reserve 2017 Nissan TITAN PRO-4X 2017 Nissan TITAN S 2017 Nissan TITAN SL 2017 Nissan TITAN SV 2016-2018 Nissan TITAN XD Platinum Reserve 2016-2018 Nissan TITAN XD PRO-4X 2016-2018 Nissan TITAN XD S 2016-2018 Nissan TITAN XD SL 2016-2018 Nissan TITAN XD SV