The MagnaFlow 2011-2014 Ford F-150 Street Series Cat-Back Performance Exhaust System 15461 brings out the personality of your 3.7L, 5.0L, 6.2L 2011-2014 Ford F-150 with our signature resonant, powerful engine tone and dyno-proven performance. Thanks to its fast-flowing, mandrel bent 3in. main piping and 1 Straight-Through mufflers ending in a Dual Same Side Behind Passenger Rear Tire exit with 3.5in. Polished Welded-On Double Wall Angle Cut Folded Edge tips, this Ford F-150 exhaust kit has the performance chops to match its sporty sound and appearance. Upgrade your ride to the next level with an exhaust that has the pipes to put other Ford F-150's to shame. With this system your vehicle will be producing Aggressive exterior and Moderate interior sound levels while leaving other cars and trucks feeling envious at every stoplight. Exhaust kit 15461 features a cat-back layout that replaces your ride's stock exhaust components from near the catalytic converter on back. Extensive 3D scanning during development has resulted in a direct-fit design that you can easily install yourself. 15461 is produced using CNC precision robotic manufacturing techniques and is backed by MagnaFlow's 1-year limited finish warranty and limited lifetime construction warranty.This Part Fits: Year Make Model Submodel 2011-2014 Ford F-150 FX2 2011-2014 Ford F-150 FX4 2011-2012 Ford F-150 Harley-Davidson Edition 2011-2014 Ford F-150 King Ranch 2011-2014 Ford F-150 Lariat 2011 Ford F-150 Lariat Limited 2011-2014 Ford F-150 Platinum 2011-2014 Ford F-150 STX 2011-2014 Ford F-150 SVT Raptor 2011-2014 Ford F-150 XL 2011-2014 Ford F-150 XLT

The MagnaFlow 2011-2014 Ford F-150 Street Series Cat-Back Performance Exhaust System 15460 brings out the personality of your 3.7L, 5.0L, 6.2L 2011-2014 Ford F-150 with our signature resonant, powerful engine tone and dyno-proven performance. Thanks to its fast-flowing, mandrel bent 3in. main piping and 1 Straight-Through mufflers ending in a Dual Split Rear exit with 3.5in. Polished Clamp-On Single Wall Angle Cut Rolled Edge tips, this Ford F-150 exhaust kit has the performance chops to match its sporty sound and appearance. Upgrade your ride to the next level with an exhaust that has the pipes to put other Ford F-150's to shame. With this system your vehicle will be producing Aggressive exterior and Moderate interior sound levels while leaving other cars and trucks feeling envious at every stoplight. Exhaust kit 15460 features a cat-back layout that replaces your ride's stock exhaust components from near the catalytic converter on back. Extensive 3D scanning during development has resulted in a direct-fit design that you can easily install yourself. 15460 is produced using CNC precision robotic manufacturing techniques and is backed by MagnaFlow's 1-year limited finish warranty and limited lifetime construction warranty.This Part Fits: Year Make Model Submodel 2011-2014 Ford F-150 FX2 2011-2014 Ford F-150 FX4 2011-2012 Ford F-150 Harley-Davidson Edition 2011-2014 Ford F-150 King Ranch 2011-2014 Ford F-150 Lariat 2011 Ford F-150 Lariat Limited 2011-2014 Ford F-150 Platinum 2011-2014 Ford F-150 STX 2011-2014 Ford F-150 SVT Raptor 2011-2014 Ford F-150 XL 2011-2014 Ford F-150 XLT

The MagnaFlow 2011-2014 Ford F-150 Street Series Cat-Back Performance Exhaust System 15000 brings out the personality of your 3.7L, 5.0L, 6.2L 2011-2014 Ford F-150 with our signature resonant, powerful engine tone and dyno-proven performance. Thanks to its fast-flowing, mandrel bent 3in. main piping and 1 Straight-Through mufflers ending in a Single Passenger Side Rear exit with 4in. Polished Welded-On Double Wall Angle Cut Rolled Edge tips, this Ford F-150 exhaust kit has the performance chops to match its sporty sound and appearance. Upgrade your ride to the next level with an exhaust that has the pipes to put other Ford F-150's to shame. With this system your vehicle will be producing Moderate exterior and Mild interior sound levels while leaving other cars and trucks feeling envious at every stoplight. Exhaust kit 15000 features a cat-back layout that replaces your ride's stock exhaust components from near the catalytic converter on back. Extensive 3D scanning during development has resulted in a direct-fit design that you can easily install yourself. 15000 is produced using CNC precision robotic manufacturing techniques and is backed by MagnaFlow's 1-year limited finish warranty and limited lifetime construction warranty.This Part Fits: Year Make Model Submodel 2011-2014 Ford F-150 FX2 2011-2014 Ford F-150 FX4 2011-2012 Ford F-150 Harley-Davidson Edition 2011-2014 Ford F-150 King Ranch 2011-2014 Ford F-150 Lariat 2011 Ford F-150 Lariat Limited 2011-2014 Ford F-150 Platinum 2011-2014 Ford F-150 STX 2011-2014 Ford F-150 SVT Raptor 2011-2014 Ford F-150 XL 2011-2014 Ford F-150 XLT

The MagnaFlow 2011-2014 Ford F-150 Off-Road Pro Series Cat-Back Performance Exhaust System 17137 brings additional off-roading prowess and our deep signature exhaust note to your 3.7L, 5.0L, 6.2L 2011-2014 Ford F-150 with a weight-optimized, dyno-tested, corrosion resistant and durable stainless steel design engineered to closely hug the undercarriage for improved ground clearance. Exhaust kit 17137 is engineered to produce Very Aggressive exterior and Aggressive interior sound levels. Extensive 3D scanning was used during the development of this Ford F-150 exhaust system to create a direct-fit design, enabling a do-it-yourself installation process. 17137's emissions-legal cat-back design replaces all your truck's exhaust components from the catalytic converter on back with its 3in. diameter mandrel bent main piping that passes through 1 Straight-Through mufflers before ending in a turndown before rear axle exit with 3in. Satin Clamp-On Single Wall Turndown Cut Edge tips. Exhaust system 17137 is produced using advanced CNC precision robotic manufacturing techniques and backed by MagnaFlow's limited lifetime warranty.This Part Fits: Year Make Model Submodel 2011-2014 Ford F-150 FX2 2011-2014 Ford F-150 FX4 2011-2012 Ford F-150 Harley-Davidson Edition 2011-2014 Ford F-150 King Ranch 2011-2014 Ford F-150 Lariat 2011 Ford F-150 Lariat Limited 2011-2014 Ford F-150 Platinum 2011-2014 Ford F-150 STX 2011-2014 Ford F-150 SVT Raptor 2011-2014 Ford F-150 XL 2011-2014 Ford F-150 XLT

Keep the check engine light off with MagnaFlow OEM Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 21-695. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow's state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This direct-fit catalytic converter is designed specifically for the 2011-2012 Audi A8 Quattro and interchanges with OE parts 4H0 254 250 QX and 4H0 254 250 NX. The included gaskets & hardware reduce the possibility of a leaking seal while avoiding the need to reuse corroded factory parts for installation. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with California or Federal/EPA Emission systems.This Part Fits: Year Make Model Submodel 2011-2012 Audi A8 Quattro Base 2011-2012 Audi A8 Quattro L

Keep the check engine light off with MagnaFlow California Grade CARB Compliant Direct-Fit Catalytic Converter 5421269. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow's state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This direct-fit catalytic converter is designed specifically for the 2011-2012 Chevrolet Malibu. The included gaskets & hardware reduce the possibility of a leaking seal while avoiding the need to reuse corroded factory parts for installation. This replacement part is designed to meet or exceed California Air Resource Board requirements, and has undergone additional testing to comply with CARB guidelines to allow for legal use in California and CARB restricted states, for the listed vehicles.This Part Fits: Year Make Model Submodel 2011-2012 Chevrolet Malibu LS 2011-2012 Chevrolet Malibu LT 2011-2012 Chevrolet Malibu LTZ

Keep the check engine light off with MagnaFlow California Grade CARB Compliant Direct-Fit Catalytic Converter 551726. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow's state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This direct-fit catalytic converter is designed specifically for the 2011-2012 Chevrolet Malibu. The included gaskets & hardware reduce the possibility of a leaking seal while avoiding the need to reuse corroded factory parts for installation. This replacement part is designed to meet or exceed California Air Resource Board requirements, and has undergone additional testing to comply with CARB guidelines to allow for legal use in California and CARB restricted states, for the listed vehicles.This Part Fits: Year Make Model Submodel 2011-2012 Chevrolet Malibu LS 2011-2012 Chevrolet Malibu LT 2011-2012 Chevrolet Malibu LTZ

Keep the check engine light off with MagnaFlow California Grade CARB Compliant Direct-Fit Catalytic Converter 557229. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow's state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This direct-fit catalytic converter is designed specifically for the 2011-2012 Chevrolet Malibu. The included gaskets & hardware reduce the possibility of a leaking seal while avoiding the need to reuse corroded factory parts for installation. This replacement part is designed to meet or exceed California Air Resource Board requirements, and has undergone additional testing to comply with CARB guidelines to allow for legal use in California and CARB restricted states, for the listed vehicles.This Part Fits: Year Make Model Submodel 2011-2012 Chevrolet Malibu LS 2011-2012 Chevrolet Malibu LT 2011-2012 Chevrolet Malibu LTZ

Keep the check engine light off with MagnaFlow California Grade CARB Compliant Direct-Fit Catalytic Converter 5411726. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow's state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This direct-fit catalytic converter is designed specifically for the 2011-2012 Chevrolet Malibu. The included gaskets & hardware reduce the possibility of a leaking seal while avoiding the need to reuse corroded factory parts for installation. This replacement part is designed to meet or exceed California Air Resource Board requirements, and has undergone additional testing to comply with CARB guidelines to allow for legal use in California and CARB restricted states, for the listed vehicles.This Part Fits: Year Make Model Submodel 2011-2012 Chevrolet Malibu LS 2011-2012 Chevrolet Malibu LT 2011-2012 Chevrolet Malibu LTZ

The MagnaFlow 2012-2014 Dodge Charger Street Series Cat-Back Performance Exhaust System 15494 brings out the personality of your 6.4L 2012-2014 Dodge Charger with our signature resonant, powerful engine tone and dyno-proven performance. Thanks to its fast-flowing, mandrel bent 3in. main piping and 4 Straight-Through mufflers ending in a Dual Split Rear exit with 4in. Polished Welded-On Double Wall Angle Cut Folded Edge tips, this Dodge Charger exhaust kit has the performance chops to match its sporty sound and appearance. Upgrade your ride to the next level with an exhaust that has the pipes to put other Dodge Charger's to shame. With this system your vehicle will be producing Moderate exterior and Mild interior sound levels while leaving other cars and trucks feeling envious at every stoplight. Exhaust kit 15494 features a cat-back layout that replaces your ride's stock exhaust components from near the catalytic converter on back. Extensive 3D scanning during development has resulted in a direct-fit design that you can easily install yourself. 15494 is produced using CNC precision robotic manufacturing techniques and is backed by MagnaFlow's 1-year limited finish warranty and limited lifetime construction warranty.This Part Fits: Year Make Model Submodel 2012-2014 Dodge Charger SRT8

The MagnaFlow 2011-2014 Dodge Charger Street Series Cat-Back Performance Exhaust System 15492 brings out the personality of your 3.6L 2011-2014 Dodge Charger with our signature resonant, powerful engine tone and dyno-proven performance. Thanks to its fast-flowing, mandrel bent 2.5in. main piping and 3 Straight-Through mufflers ending in a Dual Split Rear exit, this Dodge Charger exhaust kit has the performance chops to match its sporty sound and appearance. Upgrade your ride to the next level with an exhaust that has the pipes to put other Dodge Charger's to shame. With this system your vehicle will be producing Moderate exterior and Mild interior sound levels while leaving other cars and trucks feeling envious at every stoplight. Exhaust kit 15492 features a cat-back layout that replaces your ride's stock exhaust components from near the catalytic converter on back. Extensive 3D scanning during development has resulted in a direct-fit design that you can easily install yourself. 15492 is produced using CNC precision robotic manufacturing techniques and is backed by MagnaFlow's 1-year limited finish warranty and limited lifetime construction warranty.This Part Fits: Year Make Model Submodel 2011-2014 Dodge Charger Pursuit 2011-2015 Dodge Charger SE 2012-2014 Dodge Charger SXT 2012 Dodge Charger SXT Plus

The MagnaFlow 2011-2024 Dodge Durango Street Series Cat-Back Performance Exhaust System 15068 brings out the personality of your 3.6L, 5.7L 2011-2023 Dodge Durango with our signature resonant, powerful engine tone and dyno-proven performance. Thanks to its fast-flowing, mandrel bent 2.5in. main piping and 4 Straight-Through mufflers ending in a Dual Split Rear exit with 4in. Polished Welded-On Double Wall Angle Cut Rolled Edge tips, this Dodge Durango exhaust kit has the performance chops to match its sporty sound and appearance. Upgrade your ride to the next level with an exhaust that has the pipes to put other Dodge Durango's to shame. With this system your vehicle will be producing Moderate exterior and Mild interior sound levels while leaving other cars and trucks feeling envious at every stoplight. Exhaust kit 15068 features a cat-back layout that replaces your ride's stock exhaust components from near the catalytic converter on back. Extensive 3D scanning during development has resulted in a direct-fit design that you can easily install yourself. 15068 is produced using CNC precision robotic manufacturing techniques and is backed by MagnaFlow's 1-year limited finish warranty and limited lifetime construction warranty.This Part Fits: Year Make Model Submodel 2011-2024 Dodge Durango Citadel 2011-2013 Dodge Durango Crew 2011 Dodge Durango Express 2017-2024 Dodge Durango GT 2020-2024 Dodge Durango GT Plus 2023-2024 Dodge Durango GT Premium 2011 Dodge Durango Heat 2014-2016 Dodge Durango Limited 2018-2024 Dodge Durango Pursuit 2011-2024 Dodge Durango R/T 2022-2023 Dodge Durango R/T Hemi Orange 2022-2024 Dodge Durango R/T Plus 2023-2024 Dodge Durango R/T Premium 2014-2015 Dodge Durango Rallye 2012-2024 Dodge Durango Special Service 2012-2024 Dodge Durango SXT 2018-2021,2023-2024 Dodge Durango SXT Plus

Keep the check engine light off with MagnaFlow California Grade CARB Compliant Direct-Fit Catalytic Converter 5551428. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow's state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This direct-fit catalytic converter is designed specifically for the 2011-2012 Ford F-150. This replacement part is designed to meet or exceed California Air Resource Board requirements, and has undergone additional testing to comply with CARB guidelines to allow for legal use in California and CARB restricted states, for the listed vehicles.This Part Fits: Year Make Model Submodel 2011-2012 Ford F-150 FX2 2011-2012 Ford F-150 FX4 2011-2012 Ford F-150 King Ranch 2011-2012 Ford F-150 Lariat 2011-2012 Ford F-150 Platinum 2011-2012 Ford F-150 XL 2011-2012 Ford F-150 XLT

Keep the check engine light off with MagnaFlow California Grade CARB Compliant Direct-Fit Catalytic Converter 5551429. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow's state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This direct-fit catalytic converter is designed specifically for the 2011-2012 Ford F-150. Hardware is included to eliminate the hassle of working with corroded factory parts. This replacement part is designed to meet or exceed California Air Resource Board requirements, and has undergone additional testing to comply with CARB guidelines to allow for legal use in California and CARB restricted states, for the listed vehicles.This Part Fits: Year Make Model Submodel 2011-2012 Ford F-150 FX2 2011-2012 Ford F-150 FX4 2011-2012 Ford F-150 King Ranch 2011-2012 Ford F-150 Lariat 2011-2012 Ford F-150 Platinum 2011-2012 Ford F-150 XL 2011-2012 Ford F-150 XLT

Keep the check engine light off with MagnaFlow California Grade CARB Compliant Direct-Fit Catalytic Converter 5551879. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow's state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This direct-fit catalytic converter is designed to fit the 2011-2012 Jeep Grand Cherokee and 2011 Dodge Durango. The included gaskets & hardware reduce the possibility of a leaking seal while avoiding the need to reuse corroded factory parts for installation. This replacement part is designed to meet or exceed California Air Resource Board requirements, and has undergone additional testing to comply with CARB guidelines to allow for legal use in California and CARB restricted states, for the listed vehicles.This Part Fits: Year Make Model Submodel 2011 Dodge Durango Citadel 2011 Dodge Durango Crew 2011 Dodge Durango R/T 2011-2012 Jeep Grand Cherokee Laredo 2011-2012 Jeep Grand Cherokee Limited 2011-2012 Jeep Grand Cherokee Overland 2012 Jeep Grand Cherokee Overland Summit

Keep the check engine light off with MagnaFlow California Grade CARB Compliant Direct-Fit Catalytic Converter 5561817. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow's state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This direct-fit catalytic converter is designed specifically for the 2011-2012 Kia Optima. Avoid potential exhaust leaks by using the included gaskets to get a proper seal. This replacement part is designed to meet or exceed California Air Resource Board requirements, and has undergone additional testing to comply with CARB guidelines to allow for legal use in California and CARB restricted states, for the listed vehicles.This Part Fits: Year Make Model Submodel 2011-2012 Kia Optima EX 2011-2012 Kia Optima Hybrid 2011-2012 Kia Optima LX

Keep the check engine light off with MagnaFlow California Grade CARB Compliant Direct-Fit Catalytic Converter 5531232. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow's state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This direct-fit catalytic converter is designed to fit the 2011-2012 Lincoln MKS and 2011-2012 Lincoln MKT. Avoid potential exhaust leaks by using the included gaskets to get a proper seal. This replacement part is designed to meet or exceed California Air Resource Board requirements, and has undergone additional testing to comply with CARB guidelines to allow for legal use in California and CARB restricted states, for the listed vehicles.This Part Fits: Year Make Model Submodel 2011-2012 Lincoln MKS Base 2011-2012 Lincoln MKT Base

Keep the check engine light off with MagnaFlow OEM Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 21-497. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow's state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This direct-fit catalytic converter is designed specifically for the 2011-2012 Mercedes-Benz C300 and interchanges with OE parts 204 490 73 20 80 and 204 490 17 19, among others. Hardware is included to eliminate the hassle of working with corroded factory parts. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with California or Federal/EPA Emission systems.This Part Fits: Year Make Model Submodel 2011-2012 Mercedes-Benz C300 4Matic Luxury 2011-2012 Mercedes-Benz C300 4Matic Sport

Keep the check engine light off with MagnaFlow OEM Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 60507. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow's state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This direct-fit catalytic converter is designed to fit the 2007-2010 Dodge Ram 2500, 2007-2010 Dodge Ram 3500, and additional vehicles. Avoid potential exhaust leaks by using the included gaskets to get a proper seal. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with California or Federal/EPA Emission systems.This Part Fits: Year Make Model Submodel 2007-2010 Dodge Ram 2500 Laramie 2007-2010 Dodge Ram 2500 SLT 2007-2010 Dodge Ram 2500 ST 2008-2010 Dodge Ram 2500 SXT 2010 Dodge Ram 2500 TRX 2007-2010 Dodge Ram 3500 Laramie 2007-2010 Dodge Ram 3500 SLT 2007 Dodge Ram 3500 Sport 2007-2010 Dodge Ram 3500 ST 2008-2009 Dodge Ram 3500 SXT 2011-2012 Ram 2500 Laramie 2011-2012 Ram 2500 Laramie Longhorn 2012 Ram 2500 Outdoorsman 2011-2012 Ram 2500 SLT 2011-2012 Ram 2500 ST 2011-2012 Ram 3500 Laramie 2011-2012 Ram 3500 Laramie Longhorn 2011-2012 Ram 3500 SLT 2011-2012 Ram 3500 ST

Keep the check engine light off with MagnaFlow OEM Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 52874. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow's state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This direct-fit catalytic converter is designed specifically for the 2011-2012 Kia Sedona and interchanges with OE part 28950-3CEW0. The included gaskets & hardware reduce the possibility of a leaking seal while avoiding the need to reuse corroded factory parts for installation. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with California or Federal/EPA Emission systems.This Part Fits: Year Make Model Submodel 2011-2012 Kia Sedona EX 2011-2012 Kia Sedona LX

Keep the check engine light off with MagnaFlow OEM Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 52249. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow's state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This direct-fit catalytic converter is designed specifically for the 2011-2012 BMW X3 and interchanges with OE parts 18 30 7 646 020 and 18 30 7 607 039. The included gaskets & hardware reduce the possibility of a leaking seal while avoiding the need to reuse corroded factory parts for installation. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with California or Federal/EPA Emission systems.This Part Fits: Year Make Model Submodel 2011-2012 BMW X3 xDrive28i

Keep the check engine light off with MagnaFlow OEM Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 52250. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow's state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This direct-fit catalytic converter is designed specifically for the 2011-2012 BMW X3 and interchanges with OE parts 18 30 7 646 021 and 18 30 7 607 040. The included gaskets & hardware reduce the possibility of a leaking seal while avoiding the need to reuse corroded factory parts for installation. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with California or Federal/EPA Emission systems.This Part Fits: Year Make Model Submodel 2011-2012 BMW X3 xDrive28i

The MagnaFlow 2011-2015 Cadillac CTS Street Series Cat-Back Performance Exhaust System 15496 brings out the personality of your 6.2L 2011-2015 Cadillac CTS with our signature resonant, powerful engine tone and dyno-proven performance. Thanks to its fast-flowing, mandrel bent 2.5in. main piping and 2 Straight-Through mufflers ending in a Dual Center Rear exit with 3.5 x 5.5in. Polished Welded-On Double Wall Straight Cut Rolled Edge tips, this Cadillac CTS exhaust kit has the performance chops to match its sporty sound and appearance. Upgrade your ride to the next level with an exhaust that has the pipes to put other Cadillac CTS's to shame. With this system your vehicle will be producing Moderate exterior and Mild interior sound levels while leaving other cars and trucks feeling envious at every stoplight. Exhaust kit 15496 features a cat-back layout that replaces your ride's stock exhaust components from near the catalytic converter on back. Extensive 3D scanning during development has resulted in a direct-fit design that you can easily install yourself. 15496 is produced using CNC precision robotic manufacturing techniques and is backed by MagnaFlow's 1-year limited finish warranty and limited lifetime construction warranty.This Part Fits: Year Make Model Submodel 2011-2015 Cadillac CTS V

Keep the check engine light off with MagnaFlow California Grade CARB Compliant Direct-Fit Catalytic Converter 557109. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow's state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This direct-fit catalytic converter is designed specifically for the 2011-2015 Chevrolet Cruze. This replacement part is designed to meet or exceed California Air Resource Board requirements, and has undergone additional testing to comply with CARB guidelines to allow for legal use in California and CARB restricted states, for the listed vehicles.This Part Fits: Year Make Model Submodel 2011-2015 Chevrolet Cruze Eco 2011-2015 Chevrolet Cruze LT 2011-2015 Chevrolet Cruze LTZ

The MagnaFlow 2011-2015 Ford Explorer Street Series Cat-Back Performance Exhaust System 15467 brings out the personality of your 3.5L 2011-2015 Ford Explorer with our signature resonant, powerful engine tone and dyno-proven performance. Thanks to its fast-flowing, mandrel bent 2.5in. main piping and 3 Straight-Through mufflers ending in a Dual Split Rear exit with 4in. Polished Welded-On Double Wall Angle Cut Folded Edge tips, this Ford Explorer exhaust kit has the performance chops to match its sporty sound and appearance. Upgrade your ride to the next level with an exhaust that has the pipes to put other Ford Explorer's to shame. With this system your vehicle will be producing Moderate exterior and Mild interior sound levels while leaving other cars and trucks feeling envious at every stoplight. Exhaust kit 15467 features a cat-back layout that replaces your ride's stock exhaust components from near the catalytic converter on back. Extensive 3D scanning during development has resulted in a direct-fit design that you can easily install yourself. 15467 is produced using CNC precision robotic manufacturing techniques and is backed by MagnaFlow's 1-year limited finish warranty and limited lifetime construction warranty.This Part Fits: Year Make Model Submodel 2011-2015 Ford Explorer Base 2011-2015 Ford Explorer Limited 2013-2015 Ford Explorer Sport 2011-2015 Ford Explorer XLT 2010-2012 Lincoln MKT EcoBoost

The MagnaFlow 2011-2014 Ford F-150 Street Series Cat-Back Performance Exhaust System 15101 brings out the personality of your 5.0L 2011-2014 Ford F-150 with our signature resonant, powerful engine tone and dyno-proven performance. Thanks to its fast-flowing, mandrel bent 3in. main piping and 1 Straight-Through mufflers ending in a Dual Same Side Before Passenger Rear Tire exit with 3.5in. Polished Welded-On Double Wall Angle Cut Folded Edge tips, this Ford F-150 exhaust kit has the performance chops to match its sporty sound and appearance. Upgrade your ride to the next level with an exhaust that has the pipes to put other Ford F-150's to shame. With this system your vehicle will be producing Very Aggressive exterior and Aggressive interior sound levels while leaving other cars and trucks feeling envious at every stoplight. Exhaust kit 15101 features a cat-back layout that replaces your ride's stock exhaust components from near the catalytic converter on back. Extensive 3D scanning during development has resulted in a direct-fit design that you can easily install yourself. 15101 is produced using CNC precision robotic manufacturing techniques and is backed by MagnaFlow's 1-year limited finish warranty and limited lifetime construction warranty.This Part Fits: Year Make Model Submodel 2011-2014 Ford F-150 FX2 2011-2014 Ford F-150 FX4 2011-2014 Ford F-150 King Ranch 2011-2014 Ford F-150 Lariat 2011-2014 Ford F-150 Platinum 2011-2014 Ford F-150 STX 2011-2014 Ford F-150 XL 2011-2014 Ford F-150 XLT

Keep the check engine light off with MagnaFlow OEM Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 52537. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow's state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This direct-fit catalytic converter is designed specifically for the 2011-2013 Toyota Highlander and interchanges with OE parts 17420-31403 and 17420-31400, among others. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with California or Federal/EPA Emission systems.This Part Fits: Year Make Model Submodel 2011-2013 Toyota Highlander Hybrid 2011-2013 Toyota Highlander Hybrid Limited

The MagnaFlow 2011-2014 Mazda 2 Street Series Axle-Back Performance Exhaust System 15555 brings enhanced engine sound and dyno-proven performance to your 1.5L 2011-2014 Mazda 2 with a healthy helping of our deep, resonant signature exhaust note at Moderate exterior and Mild interior sound levels. Thanks to its durable, corrosion resistant stainless steel design, this Mazda 2 exhaust system will handle whatever tarmac you decide to leave your mark on. This performance exhaust kit features an axle-back layout designed to replace your Mazda 2's exhaust system from near the rear axle on back. With its fast-flowing, mandrel bent 2.25in. main piping and 1 Straight-Through mufflers ending in a Single Straight Passenger Side Rear exit with 3.5in. Polished Welded-On Double Wall Angle Cut Folded Edge tips, your ride will be sounding as awesome as it looks. Extensive 3D scanning during development has resulted in a direct-fit design that you can easily install yourself. 15555 is produced using CNC precision robotic manufacturing techniques and is backed by MagnaFlow's 1-year limited finish warranty and limited lifetime construction warranty.This Part Fits: Year Make Model Submodel 2011-2014 Mazda 2 Sport 2011-2014 Mazda 2 Touring

Keep the check engine light off with MagnaFlow California Grade CARB Compliant Direct-Fit Catalytic Converter 551438. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow's state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This direct-fit catalytic converter is designed specifically for the 2011-2013 Nissan Juke and interchanges with OE part 208A2-1ZU0A. The included gaskets & hardware reduce the possibility of a leaking seal while avoiding the need to reuse corroded factory parts for installation. This replacement part is designed to meet or exceed California Air Resource Board requirements, and has undergone additional testing to comply with CARB guidelines to allow for legal use in California and CARB restricted states, for the listed vehicles.This Part Fits: Year Make Model Submodel 2013 Nissan Juke Nismo 2011-2013 Nissan Juke S 2011-2013 Nissan Juke SL 2011-2013 Nissan Juke SV

Keep the check engine light off with MagnaFlow California Grade CARB Compliant Direct-Fit Catalytic Converter 557110. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow's state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This direct-fit catalytic converter is designed specifically for the 2011-2015 Nissan Juke and interchanges with OE part 20010-1KM1A. The included gaskets & hardware reduce the possibility of a leaking seal while avoiding the need to reuse corroded factory parts for installation. This replacement part is designed to meet or exceed California Air Resource Board requirements, and has undergone additional testing to comply with CARB guidelines to allow for legal use in California and CARB restricted states, for the listed vehicles.This Part Fits: Year Make Model Submodel 2013 Nissan Juke Nismo 2011-2015 Nissan Juke S 2011-2015 Nissan Juke SL 2011-2015 Nissan Juke SV

Keep the check engine light off with MagnaFlow California Grade CARB Compliant Direct-Fit Catalytic Converter 557457. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow's state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This direct-fit catalytic converter is designed specifically for the 2011-2013 Nissan Juke and interchanges with OE part 20010-1KM0A. The included gaskets & hardware reduce the possibility of a leaking seal while avoiding the need to reuse corroded factory parts for installation. This replacement part is designed to meet or exceed California Air Resource Board requirements, and has undergone additional testing to comply with CARB guidelines to allow for legal use in California and CARB restricted states, for the listed vehicles.This Part Fits: Year Make Model Submodel 2013 Nissan Juke Nismo 2011-2013 Nissan Juke S 2011-2013 Nissan Juke SL 2011-2013 Nissan Juke SV

Keep the check engine light off with MagnaFlow California Grade CARB Compliant Direct-Fit Catalytic Converter 557234. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow's state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This direct-fit catalytic converter is designed specifically for the 2011-2014 Nissan Maxima and interchanges with OE part 20020-9DC0A. The included gaskets & hardware reduce the possibility of a leaking seal while avoiding the need to reuse corroded factory parts for installation. This replacement part is designed to meet or exceed California Air Resource Board requirements, and has undergone additional testing to comply with CARB guidelines to allow for legal use in California and CARB restricted states, for the listed vehicles.This Part Fits: Year Make Model Submodel 2011-2014 Nissan Maxima S 2011-2014 Nissan Maxima SV

Keep the check engine light off with MagnaFlow OEM Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 22-035. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow's state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. Designed to fit the 2014-2016 INFINITI QX80 and 2011-2013 INFINITI QX56, this direct-fit catalytic converter also interchanges with OE part 14002-1LA0C. The included gaskets & hardware reduce the possibility of a leaking seal while avoiding the need to reuse corroded factory parts for installation. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with California or Federal/EPA Emission systems.This Part Fits: Year Make Model Submodel 2011-2013 INFINITI QX56 Base 2014-2017 INFINITI QX80 Base 2016-2017 INFINITI QX80 Limited

Keep the check engine light off with MagnaFlow OEM Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 22-036. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow's state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. Designed to fit the 2014-2016 INFINITI QX80 and 2011-2013 INFINITI QX56, this direct-fit catalytic converter also interchanges with OE part 14002-1LA0D. The included gaskets & hardware reduce the possibility of a leaking seal while avoiding the need to reuse corroded factory parts for installation. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with California or Federal/EPA Emission systems.This Part Fits: Year Make Model Submodel 2011-2013 INFINITI QX56 Base 2014-2017 INFINITI QX80 Base 2016-2017 INFINITI QX80 Limited

Keep the check engine light off with MagnaFlow OEM Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 21-041. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow's state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. Designed to fit the 2014-2018 INFINITI QX80, 2017-2018 Nissan Armada, and more, this direct-fit catalytic converter also interchanges with OE parts 20010-1LA0E and 20010-1LA0A. The included gaskets & hardware reduce the possibility of a leaking seal while avoiding the need to reuse corroded factory parts for installation. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with California or Federal/EPA Emission systems.This Part Fits: Year Make Model Submodel 2011-2013 INFINITI QX56 Base 2014-2018 INFINITI QX80 Base 2016-2017,2019-2020 INFINITI QX80 Limited 2019-2021 INFINITI QX80 Luxe 2021 INFINITI QX80 Premium Select 2021 INFINITI QX80 Sensory 2021-2022 Nissan Armada Midnight Edition 2017-2022 Nissan Armada Platinum 2018-2020 Nissan Armada Platinum Reserve 2021-2022 Nissan Armada S 2017-2022 Nissan Armada SL 2017-2022 Nissan Armada SV 2017-2019 Nissan TITAN Platinum Reserve 2017-2019 Nissan TITAN PRO-4X 2017-2019 Nissan TITAN S 2017-2019 Nissan TITAN SL 2017-2019 Nissan TITAN SV

Keep the check engine light off with MagnaFlow OEM Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 21-121. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow's state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. Designed to fit the 2014-2018 INFINITI QX80, 2017-2018 Nissan Armada, and more, this direct-fit catalytic converter also interchanges with OE parts 20020-1LA0E and 20020-1LA0A. The included gaskets & hardware reduce the possibility of a leaking seal while avoiding the need to reuse corroded factory parts for installation. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with California or Federal/EPA Emission systems.This Part Fits: Year Make Model Submodel 2011-2013 INFINITI QX56 Base 2014-2018 INFINITI QX80 Base 2016-2017,2019-2020 INFINITI QX80 Limited 2019-2021 INFINITI QX80 Luxe 2021 INFINITI QX80 Premium Select 2021 INFINITI QX80 Sensory 2021-2022 Nissan Armada Midnight Edition 2017-2018,2020-2022 Nissan Armada Platinum 2018,2020 Nissan Armada Platinum Reserve 2021-2022 Nissan Armada S 2017-2018,2020-2022 Nissan Armada SL 2017-2018,2020-2022 Nissan Armada SV 2017-2019 Nissan TITAN Platinum Reserve 2017-2019 Nissan TITAN PRO-4X 2017-2019 Nissan TITAN S 2017-2019 Nissan TITAN SL 2017-2019 Nissan TITAN SV