Close ×
Choose your Vehicle
Select your vehicle for a custom shopping experience
Mishimoto 15-17 Ford Expedition 3.5L EcoBoost Silicone Radiator Hose Kit - Black
$249.55
$264.00
There's no worse feeling than walking out to your truck and seeing a puddle of coolant under it. As vehicles grow older, the rubber components under the hood start to degrade. It's only a matter of time before the radiator hoses begin to leak.The best time to replace a leaking hose is before it starts leaking. That's why Mishimoto has created a silicone radiator hose kit for your 2015-2017 Ford Expedition 3.5L EcoBoost. Built with five layers of durable silicone embedded with heat-resistant fibers, these hoses will withstand the test of time. These Mishimoto silicone hoses include a pre-installed quick disconnect on the lower hose to make installation easy. We've also replaced the leak-prone plastic connector with durable stainless steel for long-lasting reliability and leak-free operationThis kit includes both the upper and lower radiator hoses and is available in black, blue, or red. Plus, all our products are backed by our Lifetime Warranty, so you'll never have to see another coolant puddle again.This Part Fits:
Year
Make
Model
Submodel
2015-2017
Ford
Expedition
EL King Ranch
2015-2017
Ford
Expedition
EL Limited
2015-2017
Ford
Expedition
EL Platinum
2016-2017
Ford
Expedition
EL SSV
2015-2017
Ford
Expedition
EL XL
2015-2017
Ford
Expedition
EL XLT
2015-2017
Ford
Expedition
King Ranch
2015-2017
Ford
Expedition
Limited
2015-2017
Ford
Expedition
Platinum
2016-2017
Ford
Expedition
SSV
2015-2017
Ford
Expedition
XL
2015-2017
Ford
Expedition
XLT
Mishimoto 15-17 Ford F-150 (incl. Raptor) Transmission Cooler
$467.95
$495.00
Heavy loads are no match for a 2015-2021 Ford F-150 equipped with a Mishimoto Transmission Cooler. The Ford F-150 is renowned for being incredibly capable for the money. With up to 12,000 lbs of towing capacity, it’s certainly no slouch. But every powertrain has its limits. With the Mishimoto 2015-2021 F-150 transmission cooler, you’ll be able to push those limits knowing that your transmission is protected. The 10-row tube-and-fin cooler provides a 212% larger tube surface area and 132% fin surface area over stock. Cooling potential is increased even more by a 105% greater core volume and 184% greater fluid capacity. No modifications are necessary for installation, and, just like all Mishimoto F-150 parts, this 2015-2021 Ford F-150 transmission cooler comes with the Mishimoto Lifetime Warranty.This Part Fits:
Year
Make
Model
Submodel
2015-2017
Ford
F-150
King Ranch
2015-2017
Ford
F-150
Lariat
2016-2017
Ford
F-150
Limited
2015-2017
Ford
F-150
Platinum
2017-2021
Ford
F-150
Raptor
2016-2017
Ford
F-150
SSV
2015-2017
Ford
F-150
XL
2015-2017
Ford
F-150
XLT
Mishimoto 15-17 Ford F-150 2.7L EcoBoost I/C Pipe Kit - Wrinkle Black
$827.79
$876.00
Mishimoto has developed a direct-fit 2015-2017 2.7L F-150 EcoBoost Intercooler Pipe kit that allows owners to maximize the performance potential of their F-150.This kit includes replacements for both hot-side pipes, cold-side pipe, and all boots. Replace the weak and unattractive plastic piping with free-flowing, durable, aluminum piping and DuraCore boots. The 38-percent larger volume of our pipe kit allows your 2015-2017 2.7L F-150 EcoBoost to breathe free and make the most of the its two turbochargers. DuraCore boots coupled with constant-tension worm-gear clamps provide superior strength and blow-out resistance, ensuring boost always makes it to its destination. Available with a sleek polished finish or powder-coated in stealthy wrinkle black, these pipes are a great addition to every F-150 EcoBoost from the show to the track.Combine this kit with the Mishimoto 2015+ F-150 EcoBoost intercooler to unleash everything the twin-turbo 2.7L EcoBoost engine is capable of. As with all Mishimoto products, this 2015-2017 2.7L F-150 EcoBoost intercooler pipe kit is backed by our Lifetime Warranty.This Part Fits:
Year
Make
Model
Submodel
2015-2017
Ford
F-150
King Ranch
2015-2017
Ford
F-150
Lariat
2016-2017
Ford
F-150
Limited
2015-2017
Ford
F-150
Platinum
2017
Ford
F-150
Raptor
2016-2017
Ford
F-150
SSV
2015-2017
Ford
F-150
XL
2015-2017
Ford
F-150
XLT
Mishimoto 15-17 Ford F-150 2.7L EcoBoost Baffled Oil Catch Can - Black
$436.75
$462.00
Turbocharging and direct-injection are quickly becoming the go-to method for building powerful and efficient trucks. However, if not carefully maintained, they can also mean the end for your 2015-2017 Ford F-150 2.7L EcoBoost. Direct injection makes the 2.7L EcoBoost one of the most efficient engines ever fitted to the F-150. But, without the benefit of fuel washing over the back of the intake valves, blow-by is free to accumulate in the form of carbon deposits. Eventually, those carbon deposits can choke your engine and reduce its performance. Thankfully, Mishimoto has a solution. Mishimoto's 2015-2017 Ford F-150 2.7L EcoBoost Catch Can Kit protects your intake tract and valves from the harmful effects of blow-by and carbon accumulation. The dual-can setup ensures that blow-by is routed away from your intake and valves and is captured in our road-proven, baffled catch cans. Whether you're hard on the throttle or cruising around town, these cans have your engine's back. The 3mm thick steel bracket is strong enough to handle any terrain a work truck or daily driver will see and the included quick-disconnect fittings make installation a breeze. Of course, this catch can kit is backed by our Mishimoto Lifetime Warranty so you can rest easy knowing your 2015-2017 F-150 2.7L EcoBoost is protected from blow-by for as long as you own it.This Part Fits:
Year
Make
Model
Submodel
2015-2017
Ford
F-150
King Ranch
2015-2017
Ford
F-150
Lariat
2016-2017
Ford
F-150
Limited
2015-2017
Ford
F-150
Platinum
2017
Ford
F-150
Raptor
2016-2017
Ford
F-150
SSV
2015-2017
Ford
F-150
XL
2015-2017
Ford
F-150
XLT
Mishimoto 15-17 Ford F-150 2.7L EcoBoost Black Performance Intercooler Kit w/ Black Pipes
$1,933.31
$2,045.00
Mishimoto has developed a direct-fit 2015-2017 2.7L F-150 EcoBoost Intercooler and Pipe kit that allows owners to maximize the performance potential of their F-150. Our kit replaces the weak and unattractive plastic piping with free-flowing, durable aluminum piping and silicone boots with DuraCore technology. The 38-percent larger volume of our pipes allows your 2015-2017 2.7L F-150 EcoBoost to breathe free and make the most of the its two turbochargers. DuraCore boots coupled with constant-tension worm gear clamps provide superior strength and blowout resistance, ensuring boost always makes it to its destination. Combine our piping with the Mishimoto 2015+ F-150 EcoBoost Intercooler to unleash everything the twin-turbo 2.7L EcoBoost engine is capable of. Our intercooler increases core volume by 77-percent over stock and external fin surface area by 163-percent. With cast end tanks and bar-and-plate construction, our intercooler combines strength and power for an all-around upgrade over stock. This kit is available with a black or silver intercooler and wrinkle black or polished pipes. As with all Mishimoto products, this 2015-2017 2.7LF-150 EcoBoost Intercooler and Pipe kit is backed by our Lifetime Warranty.This Part Fits:
Year
Make
Model
Submodel
2015-2017
Ford
F-150
King Ranch
2015-2017
Ford
F-150
Lariat
2016-2017
Ford
F-150
Limited
2015-2017
Ford
F-150
Platinum
2017
Ford
F-150
Raptor
2016-2017
Ford
F-150
SSV
2015-2017
Ford
F-150
XL
2015-2017
Ford
F-150
XLT
Mishimoto 15-17 Ford F-150 2.7L EcoBoost I/C Pipe Kit - Polished
$827.79
$876.00
Mishimoto has developed a direct-fit 2015-2017 2.7L F-150 EcoBoost Intercooler Pipe kit that allows owners to maximize the performance potential of their F-150.This kit includes replacements for both hot-side pipes, cold-side pipe, and all boots. Replace the weak and unattractive plastic piping with free-flowing, durable, aluminum piping and DuraCore boots. The 38-percent larger volume of our pipe kit allows your 2015-2017 2.7L F-150 EcoBoost to breathe free and make the most of the its two turbochargers. DuraCore boots coupled with constant-tension worm-gear clamps provide superior strength and blow-out resistance, ensuring boost always makes it to its destination. Available with a sleek polished finish or powder-coated in stealthy wrinkle black, these pipes are a great addition to every F-150 EcoBoost from the show to the track.Combine this kit with the Mishimoto 2015+ F-150 EcoBoost intercooler to unleash everything the twin-turbo 2.7L EcoBoost engine is capable of. As with all Mishimoto products, this 2015-2017 2.7L F-150 EcoBoost intercooler pipe kit is backed by our Lifetime Warranty.This Part Fits:
Year
Make
Model
Submodel
2015-2017
Ford
F-150
King Ranch
2015-2017
Ford
F-150
Lariat
2016-2017
Ford
F-150
Limited
2015-2017
Ford
F-150
Platinum
2017
Ford
F-150
Raptor
2016-2017
Ford
F-150
SSV
2015-2017
Ford
F-150
XL
2015-2017
Ford
F-150
XLT
Mishimoto 15-17 Ford F-150 2.7L EcoBoost Silicone Hose Kit (Black)
$228.75
$242.00
There's no worse feeling than walking out to your truck and seeing a puddle of coolant under it. As vehicles grow older, the rubber components under the hood start to degrade. It's only a matter of time before radiator hoses begin to leak.The best time to replace a leaking hose is before it starts leaking. That's why Mishimoto has created a silicone radiator hose kit for your 2015-2017 Ford F-150 2.7L EcoBoost. Built with five layers of durable silicone embedded with heat-resistant fibers, these hoses will withstand the test of time.This kit includes both the upper and lower radiator hoses and is available in black, blue, or red. Plus, all our products are backed by our Lifetime Warranty, so you'll never have to see another coolant puddle again.This Part Fits:
Year
Make
Model
Submodel
2015-2017
Ford
F-150
King Ranch
2015-2017
Ford
F-150
Lariat
2016-2017
Ford
F-150
Limited
2015-2017
Ford
F-150
Platinum
2017
Ford
F-150
Raptor
2016-2017
Ford
F-150
SSV
2015-2017
Ford
F-150
XL
2015-2017
Ford
F-150
XLT
Mishimoto 15-17 Ford F-150 2.7L EcoBoost Silver Performance Intercooler Kit w/ Black Pipes
$1,933.31
$2,045.00
Mishimoto has developed a direct-fit 2015-2017 2.7L F-150 EcoBoost Intercooler and Pipe kit that allows owners to maximize the performance potential of their F-150. Our kit replaces the weak and unattractive plastic piping with free-flowing, durable aluminum piping and silicone boots with DuraCore technology. The 38-percent larger volume of our pipes allows your 2015-2017 2.7L F-150 EcoBoost to breathe free and make the most of the its two turbochargers. DuraCore boots coupled with constant-tension worm gear clamps provide superior strength and blowout resistance, ensuring boost always makes it to its destination. Combine our piping with the Mishimoto 2015+ F-150 EcoBoost Intercooler to unleash everything the twin-turbo 2.7L EcoBoost engine is capable of. Our intercooler increases core volume by 77-percent over stock and external fin surface area by 163-percent. With cast end tanks and bar-and-plate construction, our intercooler combines strength and power for an all-around upgrade over stock. This kit is available with a black or silver intercooler and wrinkle black or polished pipes. As with all Mishimoto products, this 2015-2017 2.7L F-150 EcoBoost Intercooler and Pipe kit is backed by our Lifetime Warranty.This Part Fits:
Year
Make
Model
Submodel
2015-2017
Ford
F-150
King Ranch
2015-2017
Ford
F-150
Lariat
2016-2017
Ford
F-150
Limited
2015-2017
Ford
F-150
Platinum
2017
Ford
F-150
Raptor
2016-2017
Ford
F-150
SSV
2015-2017
Ford
F-150
XL
2015-2017
Ford
F-150
XLT
Mishimoto 15-17 Ford F-150 5.0L V8 Radiator Hose Kit - Black
$266.19
$282.00
There's no worse feeling than walking out to your truck and seeing a puddle of coolant under it. As vehicles grow older, the rubber components under the hood start to degrade. It's only a matter of time before the radiator hoses begin to leak.The best time to replace a leaking hose is before it starts leaking. That's why Mishimoto has created a silicone radiator hose kit for your 2015-2017 Ford F-150 5.0L V8. Built with five layers of durable silicone embedded with heat-resistant fibers, these hoses will withstand the test of time. These Mishimoto silicone hoses include a pre-installed quick disconnect on the lower hose to make installation easy. We've also replaced the leak-prone plastic connector with durable stainless steel for long-lasting reliability and leak-free operationThis kit includes both the upper and lower radiator hoses and is available in black, blue, or red. Plus, all our products are backed by our Lifetime Warranty, so you'll never have to see another coolant puddle again.This Part Fits:
Year
Make
Model
Submodel
2015-2017
Ford
F-150
King Ranch
2015-2017
Ford
F-150
Lariat
2016-2017
Ford
F-150
Limited
2015-2017
Ford
F-150
Platinum
2017
Ford
F-150
Raptor
2016-2017
Ford
F-150
SSV
2015-2017
Ford
F-150
XL
2015-2017
Ford
F-150
XLT
Mishimoto 15-17 Ford F-150 5.0L V8 Radiator Hose Kit - Blue
$266.19
$282.00
There's no worse feeling than walking out to your truck and seeing a puddle of coolant under it. As vehicles grow older, the rubber components under the hood start to degrade. It's only a matter of time before the radiator hoses begin to leak.The best time to replace a leaking hose is before it starts leaking. That's why Mishimoto has created a silicone radiator hose kit for your 2015-2017 Ford F-150 5.0L V8. Built with five layers of durable silicone embedded with heat-resistant fibers, these hoses will withstand the test of time. These Mishimoto silicone hoses include a pre-installed quick disconnect on the lower hose to make installation easy. We've also replaced the leak-prone plastic connector with durable stainless steel for long-lasting reliability and leak-free operationThis kit includes both the upper and lower radiator hoses and is available in black, blue, or red. Plus, all our products are backed by our Lifetime Warranty, so you'll never have to see another coolant puddle again.This Part Fits:
Year
Make
Model
Submodel
2015-2017
Ford
F-150
King Ranch
2015-2017
Ford
F-150
Lariat
2016-2017
Ford
F-150
Limited
2015-2017
Ford
F-150
Platinum
2017
Ford
F-150
Raptor
2016-2017
Ford
F-150
SSV
2015-2017
Ford
F-150
XL
2015-2017
Ford
F-150
XLT
Mishimoto 15-17 Ford F-150 5.0L V8 Radiator Hose Kit - Red
$266.19
$282.00
There's no worse feeling than walking out to your truck and seeing a puddle of coolant under it. As vehicles grow older, the rubber components under the hood start to degrade. It's only a matter of time before the radiator hoses begin to leak.The best time to replace a leaking hose is before it starts leaking. That's why Mishimoto has created a silicone radiator hose kit for your 2015-2017 Ford F-150 5.0L V8. Built with five layers of durable silicone embedded with heat-resistant fibers, these hoses will withstand the test of time. These Mishimoto silicone hoses include a pre-installed quick disconnect on the lower hose to make installation easy. We've also replaced the leak-prone plastic connector with durable stainless steel for long-lasting reliability and leak-free operationThis kit includes both the upper and lower radiator hoses and is available in black, blue, or red. Plus, all our products are backed by our Lifetime Warranty, so you'll never have to see another coolant puddle again.This Part Fits:
Year
Make
Model
Submodel
2015-2017
Ford
F-150
King Ranch
2015-2017
Ford
F-150
Lariat
2016-2017
Ford
F-150
Limited
2015-2017
Ford
F-150
Platinum
2017
Ford
F-150
Raptor
2016-2017
Ford
F-150
SSV
2015-2017
Ford
F-150
XL
2015-2017
Ford
F-150
XLT
Mishimoto 15-17 Ford F-150 EcoBoost 2.7L Black Performance Intercooler Kit w/ Polished Pipes
$1,933.31
$2,045.00
Mishimoto has developed a direct-fit 2015-2017 2.7L F-150 EcoBoost Intercooler and Pipe kit that allows owners to maximize the performance potential of their F-150. Our kit replaces the weak and unattractive plastic piping with free-flowing, durable aluminum piping and silicone boots with DuraCore technology. The 38-percent larger volume of our pipes allows your 2015-2017 2.7L F-150 EcoBoost to breathe free and make the most of the its two turbochargers. DuraCore boots coupled with constant-tension worm gear clamps provide superior strength and blowout resistance, ensuring boost always makes it to its destination. Combine our piping with the Mishimoto 2015+ F-150 EcoBoost Intercooler to unleash everything the twin-turbo 2.7L EcoBoost engine is capable of. Our intercooler increases core volume by 77-percent over stock and external fin surface area by 163-percent. With cast end tanks and bar-and-plate construction, our intercooler combines strength and power for an all-around upgrade over stock. This kit is available with a black or silver intercooler and wrinkle black or polished pipes. As with all Mishimoto products, this 2015-2017 2.7L F-150 EcoBoost Intercooler and Pipe kit is backed by our Lifetime Warranty.This Part Fits:
Year
Make
Model
Submodel
2015-2017
Ford
F-150
King Ranch
2015-2017
Ford
F-150
Lariat
2016-2017
Ford
F-150
Limited
2015-2017
Ford
F-150
Platinum
2017
Ford
F-150
Raptor
2016-2017
Ford
F-150
SSV
2015-2017
Ford
F-150
XL
2015-2017
Ford
F-150
XLT
Mishimoto 15-17 Ford F-150 EcoBoost 2.7L Silver Performance Intercooler Kit w/ Polished Pipes
$1,933.31
$2,045.00
Mishimoto has developed a direct-fit 2015-2017 2.7L F-150 EcoBoost Intercooler and Pipe kit that allows owners to maximize the performance potential of their F-150. Our kit replaces the weak and unattractive plastic piping with free-flowing, durable aluminum piping and silicone boots with DuraCore technology. The 38-percent larger volume of our pipes allows your 2015-2017 2.7L F-150 EcoBoost to breathe free and make the most of the its two turbochargers. DuraCore boots coupled with constant-tension worm gear clamps provide superior strength and blowout resistance, ensuring boost always makes it to its destination. Combine our piping with the Mishimoto 2015+ F-150 EcoBoost Intercooler to unleash everything the twin-turbo 2.7L EcoBoost engine is capable of. Our intercooler increases core volume by 77-percent over stock and external fin surface area by 163-percent. With cast end tanks and bar-and-plate construction, our intercooler combines strength and power for an all-around upgrade over stock. This kit is available with a black or silver intercooler and wrinkle black or polished pipes. As with all Mishimoto products, this 2015-2017 2.7LF-150 EcoBoost Intercooler and Pipe kit is backed by our Lifetime Warranty.This Part Fits:
Year
Make
Model
Submodel
2015-2017
Ford
F-150
King Ranch
2015-2017
Ford
F-150
Lariat
2016-2017
Ford
F-150
Limited
2015-2017
Ford
F-150
Platinum
2017
Ford
F-150
Raptor
2016-2017
Ford
F-150
SSV
2015-2017
Ford
F-150
XL
2015-2017
Ford
F-150
XLT
Mishimoto 15-17 Ford Mustang GT Right-Hand Drive Thermostatic Oil Cooler Kit - Black
$861.07
$911.00
Nobody likes being sidelined at the track due to high engine oil temperatures. Mishimoto is here to help with a new line of efficient Mustang GT parts. Forced induction setups and some track miles can significantly overheat your oil and wear out your engine, so our engineers have developed an oil cooling solution for your Mustang GT! The Mishimoto engineers designed the heat exchanger for this project from scratch to create the largest oil cooler that we offer, and mounted it in the front of the vehicle where it receives the most airflow. Application-specific braided stainless steel lines transfer the oil from the cooler to the engine and feature -10AN fittings for an easy installation. This 2015 Mustang GT oil cooler kit is available with either a Sleek Silver or Stealth Black cooler and the Mishimoto Thermostatic Oil Sandwich Plate. As with all our 2015 Mustang parts, the Mishimoto Mustang GT Oil Cooler Kit includes the Mishimoto Lifetime Warranty.This Part Fits:
Year
Make
Model
Submodel
2019-2020
Ford
Mustang
Bullitt
2015-2021
Ford
Mustang
GT
2015
Ford
Mustang
GT 50 Years Limited Edition
2015-2021
Ford
Mustang
GT Premium
2021
Ford
Mustang
Mach 1
Mishimoto 15-17 Ford Mustang GT Right-Hand Drive Thermostatic Oil Cooler Kit - Silver
$861.07
$911.00
Nobody likes being sidelined at the track due to high engine oil temperatures. Mishimoto is here to help with a new line of efficient Mustang GT parts. Forced induction setups and some track miles can significantly overheat your oil and wear out your engine, so our engineers have developed an oil cooling solution for your Mustang GT! The Mishimoto engineers designed the heat exchanger for this project from scratch to create the largest oil cooler that we offer, and mounted it in the front of the vehicle where it receives the most airflow. Application-specific braided stainless steel lines transfer the oil from the cooler to the engine and feature -10AN fittings for an easy installation. This 2015 Mustang GT oil cooler kit is available with either a Sleek Silver or Stealth Black cooler and the Mishimoto Thermostatic Oil Sandwich Plate. As with all our 2015 Mustang parts, the Mishimoto Mustang GT Oil Cooler Kit includes the Mishimoto Lifetime Warranty.Installation InstructionsThis Part Fits:
Year
Make
Model
Submodel
2019-2020
Ford
Mustang
Bullitt
2015-2021
Ford
Mustang
GT
2015
Ford
Mustang
GT 50 Years Limited Edition
2015-2021
Ford
Mustang
GT Premium
2021
Ford
Mustang
Mach 1
Mishimoto 15-17 Volkswagen Golf Racing Thermostat - 73C
$74.83
$79.00
The Mishimoto racing thermostat for the Volkswagen Golf 2015-2017 is designed to help your cooling system operate at peak efficiency, whether you're cruising to your local car meet or tearing up the track. Our thermostat begins to open 25.2°F (14°C) earlier than the stock thermostat at 210.2°F (99°C) That allows precious coolant to flow into the radiator and start shedding heat sooner. Couple this thermostat with a Mishimoto performance aluminum radiator and you have the recipe for an engine that runs cool no matter the situation. Like all of our thermostats, this Volkswagen Golf 2015-2017 thermostat is backed by our Mishimoto Lifetime Warranty.This Part Fits:
Year
Make
Model
Submodel
2015-2017
Audi
A3
Premium
2015-2017
Audi
A3
Premium Plus
2015-2017
Audi
A3
Prestige
2015-2016
Audi
A3
TDI Premium
2015-2016
Audi
A3
TDI Premium Plus
2015-2016
Audi
A3
TDI Prestige
2015-2017
Audi
A3 Quattro
Premium
2015-2017
Audi
A3 Quattro
Premium Plus
2015-2017
Audi
A3 Quattro
Prestige
2017
Audi
A4
Premium
2017
Audi
A4
Premium Plus
2017
Audi
A4
Prestige
2017
Audi
A4 allroad
Premium
2017
Audi
A4 allroad
Premium Plus
2017
Audi
A4 allroad
Prestige
2017
Audi
A4 Quattro
Premium
2017
Audi
A4 Quattro
Premium Plus
2017
Audi
A4 Quattro
Prestige
2015-2016
Audi
A5 Quattro
Premium
2015-2016
Audi
A5 Quattro
Premium Plus
2015
Audi
A5 Quattro
Prestige
2017
Audi
A5 Quattro
Sport
2016-2017
Audi
A6
Premium
2016-2017
Audi
A6
Premium Plus
2017
Audi
A6 Quattro
Competition
2017
Audi
A6 Quattro
Premium
2016-2017
Audi
A6 Quattro
Premium Plus
2016-2017
Audi
A6 Quattro
Prestige
2016
Audi
A6 Quattro
TDI Premium Plus
2016
Audi
A6 Quattro
TDI Prestige
2017
Audi
Q7
Premium
2017
Audi
Q7
Premium Plus
2017
Audi
Q7
Prestige
2015-2017
Audi
S3
Premium Plus
2015-2017
Audi
S3
Prestige
2017
Audi
TT Quattro
Base
2016
Volkswagen
Golf
Base
2015
Volkswagen
Golf
Launch Edition
2015-2017
Volkswagen
Golf
S
2015-2016
Volkswagen
Golf
SE
2015-2016
Volkswagen
Golf
SEL
2015
Volkswagen
Golf
TDI S
2015
Volkswagen
Golf
TDI SE
2015
Volkswagen
Golf
TDI SEL
2017
Volkswagen
Golf
Wolfsburg Edition
2017
Volkswagen
Golf Alltrack
S
2017
Volkswagen
Golf Alltrack
SE
2017
Volkswagen
Golf Alltrack
SEL
2015-2017
Volkswagen
Golf R
Base
2016
Volkswagen
Golf SportWagen
Limited Edition
2015-2017
Volkswagen
Golf SportWagen
S
2015-2017
Volkswagen
Golf SportWagen
SE
2015-2017
Volkswagen
Golf SportWagen
SEL
2015
Volkswagen
Golf SportWagen
TDI S
2015
Volkswagen
Golf SportWagen
TDI SE
2015
Volkswagen
Golf SportWagen
TDI SEL
2016-2017
Volkswagen
GTI
Autobahn
2016-2017
Volkswagen
GTI
S
2016-2017
Volkswagen
GTI
SE
2017
Volkswagen
GTI
Sport
Mishimoto 15-18 Dodge RAM 6.7L Cummins Transmission Cooler
$582.35
$616.00
There’s no greater enemy for a transmission than heat. Whether your 2015-2018 RAM 6.7L Cummins is a dedicated tow vehicle, hardworking fleet truck, or a daily driver with a liking for the dragstrip, you need to ensure that your transmission runs cool. Luckily, Mishimoto has developed a direct-fit transmission cooler to do just that. Our 2015-2018 RAM 6.7L Cummins transmission cooler utilizes a tube-and-fin core with internal fins to balance flow with efficient cooling. With a massive 112-percent greater core volume, 237-percent increase in fin area, and 226-percent increase in fluid capacity, this trans cooler is a huge improvement over the stock unit. To make even better use of that extra core volume, the Mishimoto transmission cooler utilizes fins within the tubes to not only add more cooling surface area, but also ensure more of the fluid contacts the tube, leading to better cooling efficiency. All these improvements make the Mishimoto transmission cooler the ideal replacement for your stock transmission cooler.Installation of the Mishimoto 2015-2018 RAM 6.7L Cummins transmission cooler requires no cutting or other modifications and includes all hardware needed for a fast and easy install. Like all Mishimoto products, this transmission cooler is backed up by our Lifetime Warranty with Accident Protection for worry free cooling as long as you own it.This Part Fits:
Year
Make
Model
Submodel
2015-2018
Ram
2500
Big Horn
2015-2018
Ram
2500
Laramie
2015
Ram
2500
Laramie Limited
2015-2018
Ram
2500
Laramie Longhorn
2016-2018
Ram
2500
Limited
2015
Ram
2500
Lone Star
2015-2016
Ram
2500
Outdoorsman
2015-2018
Ram
2500
Power Wagon
2015-2018
Ram
2500
SLT
2015-2018
Ram
2500
Tradesman
2015-2018
Ram
3500
Big Horn
2015-2018
Ram
3500
Laramie
2015
Ram
3500
Laramie Limited
2015-2018
Ram
3500
Laramie Longhorn
2016-2018
Ram
3500
Limited
2015,2017
Ram
3500
Lone Star
2015-2018
Ram
3500
SLT
2015-2018
Ram
3500
Tradesman
Mishimoto 15-19 BMW F80 M3 Blue Racing Front Tow Hook
$185.07
$196.00
In the world of racing, things happen. Sometimes you finish on the podium, and other times you end up in the grass. But you can make sure your F80 is prepared for any event with the Mishimoto Racing Tow Hook! The Mishimoto Racing Tow Hook for the F80 chassis is a bonified race-ready and fully functional tow hook. Crafted from high-strength 7075 aluminum and 304 stainless-steel, this tow hook is made with style, strength, and weight-consciousness in mind. Whether you are taking your daily driver to a track day or prepping your full-fledged racecar, this tow hook is not just a decoration. With a 2-inch inside diameter fold-down ring design and a straight-pull strength rating of 8,000-pounds, it meets or exceeds requirements for racing series’ such as SCCA, NASA, and BMW CCA. We even include tow hook indication arrow stickers! Available in five colors, you can get race-ready and look good doing it! As with all our products, the Mishimoto Racing Tow Hook is backed by our Mishimoto Lifetime Warranty.This Part Fits:
Year
Make
Model
Submodel
2015-2018
BMW
M3
Base
2012-2018
BMW
M6
Base
2012-2017
BMW
X1
xDrive28i
2015-2017
BMW
X3
xDrive28d
2011-2017
BMW
X3
xDrive28i
2016-2017
BMW
X3
xDrive35i
2015-2017
BMW
X4
xDrive28i
2011-2017
BMW
X5
xDrive35d
2017
BMW
X5
xDrive35i
2017
BMW
X6
xDrive35i
Mishimoto 15-19 BMW F80 M3 Polished Racing Front Tow Hook
$186.11
$197.00
In the world of racing, things happen. Sometimes you finish on the podium, and other times you end up in the grass. But you can make sure your F80 is prepared for any event with the Mishimoto Racing Tow Hook! The Mishimoto Racing Tow Hook for the F80 chassis is a bonified race-ready and fully functional tow hook. Crafted from high-strength 7075 aluminum and 304 stainless-steel, this tow hook is made with style, strength, and weight-consciousness in mind. Whether you are taking your daily driver to a track day or prepping your full-fledged racecar, this tow hook is not just a decoration. With a 2-inch inside diameter fold-down ring design and a straight-pull strength rating of 8,000-pounds, it meets or exceeds requirements for racing series’ such as SCCA, NASA, and BMW CCA. We even include tow hook indication arrow stickers! Available in five colors, you can get race-ready and look good doing it! As with all our products, the Mishimoto Racing Tow Hook is backed by our Mishimoto Lifetime Warranty.This Part Fits:
Year
Make
Model
Submodel
2015-2018
BMW
M3
Base
2012-2018
BMW
M6
Base
2012-2017
BMW
X1
xDrive28i
2015-2017
BMW
X3
xDrive28d
2011-2017
BMW
X3
xDrive28i
2016-2017
BMW
X3
xDrive35i
2015-2017
BMW
X4
xDrive28i
2011-2017
BMW
X5
xDrive35d
2017
BMW
X5
xDrive35i
2017
BMW
X6
xDrive35i
Mishimoto 15-19 BMW F80 M3 Red Racing Front Tow Hook
$172.59
$183.00
In the world of racing, things happen. Sometimes you finish on the podium, and other times you end up in the grass. But you can make sure your F80 is prepared for any event with the Mishimoto Racing Tow Hook! The Mishimoto Racing Tow Hook for the F80 chassis is a bonified race-ready and fully functional tow hook. Crafted from high-strength 7075 aluminum and 304 stainless-steel, this tow hook is made with style, strength, and weight-consciousness in mind. Whether you are taking your daily driver to a track day or prepping your full-fledged racecar, this tow hook is not just a decoration. With a 2-inch inside diameter fold-down ring design and a straight-pull strength rating of 8,000-pounds, it meets or exceeds requirements for racing series’ such as SCCA, NASA, and BMW CCA. We even include tow hook indication arrow stickers! Available in five colors, you can get race-ready and look good doing it! As with all our products, the Mishimoto Racing Tow Hook is backed by our Mishimoto Lifetime Warranty.This Part Fits:
Year
Make
Model
Submodel
2015-2018
BMW
M3
Base
2012-2018
BMW
M6
Base
2012-2017
BMW
X1
xDrive28i
2015-2017
BMW
X3
xDrive28d
2011-2017
BMW
X3
xDrive28i
2016-2017
BMW
X3
xDrive35i
2015-2017
BMW
X4
xDrive28i
2011-2017
BMW
X5
xDrive35d
2017
BMW
X5
xDrive35i
2017
BMW
X6
xDrive35i
Mishimoto 15-19 BMW M3/M4 Racing Thermostat - 100C
$145.55
$154.00
The Mishimoto racing thermostat for the BMW M3/M4 2015-2019 is designed to help your cooling system operate at peak efficiency, whether you're cruising to your local car meet or tearing up the track. Our thermostat begins to open 9°F (5°C) earlier than the stock thermostat at 212°F (100°C). That allows precious coolant to flow into the radiator and start shedding heat sooner. Couple this thermostat with a Mishimoto performance aluminum radiator and you have the recipe for an engine that runs cool no matter the situation. This thermostat includes an OEM-quality housing and like all of our thermostats, this BMW M3/M4 2015-2019 thermostat is backed by our Mishimoto Lifetime Warranty.This Part Fits:
Year
Make
Model
Submodel
2017
BMW
530i
Base
2017
BMW
540i
Base
2004-2005
BMW
545i
Base
2006-2016
BMW
550i
Base
2010-2015
BMW
550i GT
Base
2010-2017
BMW
550i GT xDrive
Base
2011-2016
BMW
550i xDrive
Base
2004-2005
BMW
645Ci
Base
2006-2010,2012-2018
BMW
650i
Base
2013-2019
BMW
650i Gran Coupe
Base
2012-2018
BMW
650i xDrive
Base
2013-2019
BMW
650i xDrive Gran Coupe
Base
2011
BMW
740Li
Base
2002-2005
BMW
745i
Base
2002-2005
BMW
745Li
Base
2011-2012
BMW
750i
ActiveHybrid
2006-2015
BMW
750i
Base
2010-2015
BMW
750i xDrive
Base
2011-2012
BMW
750Li
ActiveHybrid
2006-2015
BMW
750Li
Base
2010-2015
BMW
750Li xDrive
Base
2004-2006
BMW
760i
Base
2023-2024
BMW
760i xDrive
Base
2003-2008,2010-2015
BMW
760Li
Base
2015-2019
BMW
Alpina B6 xDrive Gran Coupe
Base
2007-2008,2011-2015
BMW
Alpina B7
Base
2011-2015
BMW
Alpina B7 xDrive
Base
2011-2015
BMW
Alpina B7L
Base
2011-2015
BMW
Alpina B7L xDrive
Base
2023
BMW
Alpina XB7
Base
2016-2018,2023
BMW
M2
Base
2019-2021
BMW
M2
Competition
2020
BMW
M2
CS
2015-2018,2021-2024
BMW
M3
Base
2021-2024
BMW
M3
Competition
2022-2024
BMW
M3
Competition xDrive
2024
BMW
M3
CS
2015-2024
BMW
M4
Base
2021-2024
BMW
M4
Competition
2021-2024
BMW
M4
Competition xDrive
2019-2020
BMW
M4
CS
2023-2024
BMW
M4
CSL
2016
BMW
M4
GTS
2013-2016,2018-2023
BMW
M5
Base
2019-2021
BMW
M5
Competition
2022
BMW
M5
CS
2020
BMW
M5
Edition 35 Years
2012-2018
BMW
M6
Base
2014-2019
BMW
M6 Gran Coupe
Base
2017-2022
BMW
M760i xDrive
Base
2020
BMW
M8
Base
2020,2022-2024
BMW
M8
Competition
2020-2021
BMW
M8 Gran Coupe
Base
2020-2024
BMW
M8 Gran Coupe
Competition
2020-2024
BMW
X3
M
2020-2022
BMW
X3
M Competition
2020-2024
BMW
X3
M40i
2020-2024
BMW
X4
M
2020-2022
BMW
X4
M Competition
2020-2024
BMW
X4
M40i
2004-2006
BMW
X5
3.0i
2007-2008
BMW
X5
3.0si
2004-2006
BMW
X5
4.4i
2007-2008
BMW
X5
4.8i
2004-2006
BMW
X5
4.8is
2010-2013,2015-2018,2020-2023
BMW
X5
M
2020,2024
BMW
X5
M Competition
2020-2023
BMW
X5
M50i
2024
BMW
X5
M60i
2014-2018
BMW
X5
sDrive35i
2009-2010
BMW
X5
xDrive30i
2009-2018
BMW
X5
xDrive35d
2011-2018
BMW
X5
xDrive35i
2016-2018
BMW
X5
xDrive40e
2009-2010
BMW
X5
xDrive48i
2011-2020
BMW
X5
xDrive50i
2010-2011
BMW
X6
ActiveHybrid
2010-2023
BMW
X6
M
2020-2021,2024
BMW
X6
M Competition
2020-2023
BMW
X6
M50i
2024
BMW
X6
M60i
2015-2019
BMW
X6
sDrive35i
2008-2019
BMW
X6
xDrive35i
2008-2019
BMW
X6
xDrive50i
2023-2024
BMW
X7
M60i
2023-2024
BMW
XM
Base
2024
BMW
XM
Label
Mishimoto 15-19 Ford F-150 3.5L EcoBoost Black Silicone Coolant Hose Kit
$319.23
$338.00
There's no worse feeling than walking out to your truck and seeing a puddle of coolant under it. As vehicles grow older, the rubber components under the hood start to degrade. It's only a matter of time before radiator hoses begin to leak.The best time to replace a leaking hose is before it starts leaking. That's why Mishimoto has created a silicone radiator hose kit for your 2015-2019 Ford F-150 3.5L EcoBoost. Built with five layers of durable silicone embedded with heat-resistant fibers, these hoses will withstand the test of time. These hoses also replace the leak-prone plastic connectors with durable stainless steel and aluminum for long-lasting reliability and leak-free operation This kit includes both the upper and lower radiator hoses and is available in black, blue, or red. Plus, all our products are backed by our Lifetime Warranty, so you'll never have to see another coolant puddle again.This Part Fits:
Year
Make
Model
Submodel
2015-2019
Ford
F-150
King Ranch
2015-2019
Ford
F-150
Lariat
2016-2019
Ford
F-150
Limited
2015-2019
Ford
F-150
Platinum
2018-2019
Ford
F-150
Police Responder
2017-2019
Ford
F-150
Raptor
2016-2019
Ford
F-150
SSV
2015-2019
Ford
F-150
XL
2015-2019
Ford
F-150
XLT
Mishimoto 15-20 BMW (F8X) M3/M4 DCT Transmission Cooler
$519.95
$550.00
Keep your gears cool with the Mishimoto 2015-2020 BMW DCT Transmission Cooler. The F80 platform is one that demands peak performance, and the dual-clutch transmission equipped on your M2 Competition, M3, or M4 provides you with lightning-fast precision gear changes putting you in a league above the rest. Extreme heat being applied to your transmission, however, can easily knock your M down a few pegs. Our transmission cooler aims to provide your M with the cooling to keep up on the street and track. We started from the ground up for our DCT cooler design, equipping it with a new 1.25" thick core resulting in a 42-percent increase in core volume and 69-percent bump in external fin surface area. The improvements are more than just skin deep too, as we updated this core with a dual-pass flow and internal fins for improved heat transfer. Combined, our upgraded features improve the heat rejection characteristics for better heat regulation of the DCT in your M2 Competition, M3, or M4. The Mishimoto 2015-2020 BMW DCT Transmission Cooler is available in a silver powder coat finish and is covered by the Mishimoto Lifetime warranty for a worry-free installation.This Part Fits:
Year
Make
Model
Submodel
2016-2018
BMW
M2
Base
2019-2020
BMW
M2
Competition
2015-2018
BMW
M3
Base
2015-2020
BMW
M4
Base
2019-2020
BMW
M4
CS
2016
BMW
M4
GTS
Mishimoto 15-20 BMW F80 M3/M4 Intercooler Pipe Kit - Sakhir Orange
$374.35
$396.00
Keep the boost and style flowing through your BMW with the Mishimoto 2015+ BMW F8X M3/M4 color matched charge pipe kit. The air-to-water intercooler keeping IAT’s low is a system, and the stock charge pipes can be a weak link. Once the pressure is on, it’s not uncommon for the factory pipes to split at the plastic welds by the turbo or completely burst along the seam, leaving you with a frustrating boost leak. The Mishimoto F8X M3/M4 Charge pipes are a durable, full aluminum construction, expertly TIG-welded for a secure channel for the S55’s boost. Our charge pipes are specifically designed to deliver optimal airflow with a more uniform shape from turbo to intercooler without sacrificing fitment. To add even more style to your already impeccably designed F80, we’ve painted these charge pipes in your choice of 12 OEM colors. This high-quality, automotive-grade paint is durable enough for life under the hood and is matched to your exterior paint for an engine bay as sleek as the rest of your F80. The Mishimoto 2015+ BMW F8X M3/M4 Charge Pipes include the Mishimoto Lifetime Warranty for a lifetime of performance.This Part Fits:
Year
Make
Model
Submodel
2019-2020
BMW
M2
Competition
2015-2018
BMW
M3
Base
2015-2020
BMW
M4
Base
2019-2020
BMW
M4
CS
2016
BMW
M4
GTS
Mishimoto 15-20 BMW F80 M3/M4 Oil Cooler Kit
$1,018.11
$1,077.00
Add some much-needed durability and cooling power to your M3 or M4 with the Mishimoto 2015-2020 BMW M3/M4 Oil Cooler kit. True to form, the BMW engineers designed the M3/M4's oil cooler with efficient space use in mind. Suspended perpendicular from the rest of the cooling stack, this location utilizes the Bimmer's aerodynamics in order to cool the oil, all while putting the lightweight, tube-and-fin cooler in harm's way of road hazards. We here at Mishimoto made sure to beef up the entire oil cooling system design for the F80/82 with our performance oil cooler. We ditched the lightweight design for a full aluminum, TIG-welded bar-and-plate cooler for added strength and cooling. The bars and plates are a much more robust form of heat exchanger core construction intended for improved heat transfer and have the strength to shrug off potential road debris, keeping your oil temps down and where it should be. We also added 10mm to the core's thickness, equating in a 46-percent increase in core volume, and increased the oil capacity by .4 qt. In addition we wanted to add an extra degree of protection to the system by improving on the lines. From the factory, these vehicles are equipped with unforgiving hardlines that are prone to abrasion and corrosion damage. Our oil cooler kit provides a pair of application-specific, flexible, and robust nylon braided lines for a more secure channel for your M's oil. Also included are our specially designed adaptors allowing for AN fittings from the S55's oil pump and a secure connection to the oil cooler.The Mishimoto 2015-2020 BMW M3/M4 Oil Cooler Kit fits directly in place of the stock unit, and includes the Mishimoto Lifetime Warranty for a simplified and worry-free installation.This Part Fits:
Year
Make
Model
Submodel
2016-2018
BMW
M2
Base
2019-2021
BMW
M2
Competition
2020
BMW
M2
CS
2015-2018
BMW
M3
Base
2015-2020
BMW
M4
Base
2019-2020
BMW
M4
CS
2016
BMW
M4
GTS
2020-2022
BMW
X3
M
2020-2021
BMW
X4
M
2019-2020
Ford
Mustang
Bullitt
2018-2021
Ford
Mustang
GT
2018-2021
Ford
Mustang
GT Premium
2021
Ford
Mustang
Mach 1
Mishimoto 15-20 BMW F80 M3/M4 Skid Plate Replacement Diffuser
$29.07
$31.00
Designed for use with 2015-2020 BMW F80 M3/M4 Skid Plate (HYPERLINK TO MMSD-F80-15), this specially designed diffuser creates a low pressure zone behind the oil cooler to evacuate air for improved cooling capabilities. The diffuser is also easily removable for when more ground clearance is needed. Backed by Mishimoto Lifetime Warranty.This Part Fits:
Year
Make
Model
Submodel
2015-2018
BMW
M3
Base
2015-2020
BMW
M4
Base
2019-2020
BMW
M4
CS
2016
BMW
M4
GTS
Mishimoto 15-20 BMW F8X M3/M4 Baffled Oil Catch Can - Alpine White
$259.95
$275.00
Give your 2015-2020 BMW M3/M4 the protection it deserves with the Mishimoto Baffled Oil Catch Can Kit. The introduction of the S55 into the M3 and M4 in 2015 was the first time compact M’s saw turbos from the factory, but these engines brought along another long-standing tradition-blow-by. The Mishimoto BMW M3/M4 catch can kit uses proven engineering from the patent pending Mishimoto 2-Port Compact Baffled Oil Catch Can, with its 50-micron bronze filter and internal baffle, to better separate the oil from the crankcase vapors. The engineers at Mishimoto designed a CNC-machined lid that features large inlet and outlet ports to match the inner dimension of the CCV hose. This baffled oil catch can defends your intercooler, intake system, and VANOS system from oil blow-by and helps maintain proper octane levels to reduce potential detonation. The kit comes with two direct-fit hoses, which require no modification to the engine cover, and one direct-fit billet aluminum mounting bracket that is extremely easy to install and mounts the can in a serviceable location! Available with a color-matched bracket. Choose from 12 BMW specific color-matched options or classic black. Two aluminum, 3/4" barb fittings connect the hoses to the can. And, like every Mishimoto oil catch can, this baffled catch can kit comes with the Mishimoto Lifetime Warranty! Our catch cans are different from most air-oil-separator (AOS) systems on a few levels. First, our catch cans are not heated. This means that all of the blow-by is able to condense in the can, including low-octane oil vapors and contaminated fuel vapors. Most AOS systems also drain the blow-by back into the oil pan, while our catch cans trap the blow-by and keep it out of the engine permanently. If you’ve seen what we’ve seen in the bottom of our catch cans, you won’t want that draining back into your oil either.This Part Fits:
Year
Make
Model
Submodel
2019-2020
BMW
M2
Competition
2015-2018
BMW
M3
Base
2015-2020
BMW
M4
Base
2019-2020
BMW
M4
CS
2016
BMW
M4
GTS
Mishimoto 15-20 BMW F8X M3/M4 Baffled Oil Catch Can - Black Sapphire
$259.95
$275.00
Give your 2015-2020 BMW M3/M4 the protection it deserves with the Mishimoto Baffled Oil Catch Can Kit. The introduction of the S55 into the M3 and M4 in 2015 was the first time compact M’s saw turbos from the factory, but these engines brought along another long-standing tradition-blow-by. The Mishimoto BMW M3/M4 catch can kit uses proven engineering from the patent pending Mishimoto 2-Port Compact Baffled Oil Catch Can, with its 50-micron bronze filter and internal baffle, to better separate the oil from the crankcase vapors. The engineers at Mishimoto designed a CNC-machined lid that features large inlet and outlet ports to match the inner dimension of the CCV hose. This baffled oil catch can defends your intercooler, intake system, and VANOS system from oil blow-by and helps maintain proper octane levels to reduce potential detonation. The kit comes with two direct-fit hoses, which require no modification to the engine cover, and one direct-fit billet aluminum mounting bracket that is extremely easy to install and mounts the can in a serviceable location! Available with a color-matched bracket. Choose from 12 BMW specific color-matched options or classic black. Two aluminum, 3/4" barb fittings connect the hoses to the can. And, like every Mishimoto oil catch can, this baffled catch can kit comes with the Mishimoto Lifetime Warranty! Our catch cans are different from most air-oil-separator (AOS) systems on a few levels. First, our catch cans are not heated. This means that all of the blow-by is able to condense in the can, including low-octane oil vapors and contaminated fuel vapors. Most AOS systems also drain the blow-by back into the oil pan, while our catch cans trap the blow-by and keep it out of the engine permanently. If you’ve seen what we’ve seen in the bottom of our catch cans, you won’t want that draining back into your oil either.This Part Fits:
Year
Make
Model
Submodel
2019-2020
BMW
M2
Competition
2015-2018
BMW
M3
Base
2015-2020
BMW
M4
Base
2019-2020
BMW
M4
CS
2016
BMW
M4
GTS
Mishimoto 15-20 BMW F8X M3/M4 Baffled Oil Catch Can - Frozen Dark Gray
$327.55
$346.00
Give your 2015-2020 BMW M3/M4 the protection it deserves with the Mishimoto Baffled Oil Catch Can Kit. The introduction of the S55 into the M3 and M4 in 2015 was the first time compact M’s saw turbos from the factory, but these engines brought along another long-standing tradition-blow-by. The Mishimoto BMW M3/M4 catch can kit uses proven engineering from the patent pending Mishimoto 2-Port Compact Baffled Oil Catch Can, with its 50-micron bronze filter and internal baffle, to better separate the oil from the crankcase vapors. The engineers at Mishimoto designed a CNC-machined lid that features large inlet and outlet ports to match the inner dimension of the CCV hose. This baffled oil catch can defends your intercooler, intake system, and VANOS system from oil blow-by and helps maintain proper octane levels to reduce potential detonation. The kit comes with two direct-fit hoses, which require no modification to the engine cover, and one direct-fit billet aluminum mounting bracket that is extremely easy to install and mounts the can in a serviceable location! Available with a color-matched bracket. Choose from 12 BMW specific color-matched options or classic black. Two aluminum, 3/4" barb fittings connect the hoses to the can. And, like every Mishimoto oil catch can, this baffled catch can kit comes with the Mishimoto Lifetime Warranty! Our catch cans are different from most air-oil-separator (AOS) systems on a few levels. First, our catch cans are not heated. This means that all of the blow-by is able to condense in the can, including low-octane oil vapors and contaminated fuel vapors. Most AOS systems also drain the blow-by back into the oil pan, while our catch cans trap the blow-by and keep it out of the engine permanently. If you’ve seen what we’ve seen in the bottom of our catch cans, you won’t want that draining back into your oil either.This Part Fits:
Year
Make
Model
Submodel
2019-2020
BMW
M2
Competition
2015-2018
BMW
M3
Base
2015-2020
BMW
M4
Base
2019-2020
BMW
M4
CS
2016
BMW
M4
GTS
Mishimoto 15-20 BMW F8X M3/M4 Baffled Oil Catch Can - Lime Rock Gray
$327.55
$346.00
Give your 2015-2020 BMW M3/M4 the protection it deserves with the Mishimoto Baffled Oil Catch Can Kit. The introduction of the S55 into the M3 and M4 in 2015 was the first time compact M’s saw turbos from the factory, but these engines brought along another long-standing tradition-blow-by. The Mishimoto BMW M3/M4 catch can kit uses proven engineering from the patent pending Mishimoto 2-Port Compact Baffled Oil Catch Can, with its 50-micron bronze filter and internal baffle, to better separate the oil from the crankcase vapors. The engineers at Mishimoto designed a CNC-machined lid that features large inlet and outlet ports to match the inner dimension of the CCV hose. This baffled oil catch can defends your intercooler, intake system, and VANOS system from oil blow-by and helps maintain proper octane levels to reduce potential detonation. The kit comes with two direct-fit hoses, which require no modification to the engine cover, and one direct-fit billet aluminum mounting bracket that is extremely easy to install and mounts the can in a serviceable location! Available with a color-matched bracket. Choose from 12 BMW specific color-matched options or classic black. Two aluminum, 3/4" barb fittings connect the hoses to the can. And, like every Mishimoto oil catch can, this baffled catch can kit comes with the Mishimoto Lifetime Warranty! Our catch cans are different from most air-oil-separator (AOS) systems on a few levels. First, our catch cans are not heated. This means that all of the blow-by is able to condense in the can, including low-octane oil vapors and contaminated fuel vapors. Most AOS systems also drain the blow-by back into the oil pan, while our catch cans trap the blow-by and keep it out of the engine permanently. If you’ve seen what we’ve seen in the bottom of our catch cans, you won’t want that draining back into your oil either.This Part Fits:
Year
Make
Model
Submodel
2019-2020
BMW
M2
Competition
2015-2018
BMW
M3
Base
2015-2020
BMW
M4
Base
2019-2020
BMW
M4
CS
2016
BMW
M4
GTS
Mishimoto 15-20 BMW F8X M3/M4 Baffled Oil Catch Can - Mineral Gray
$259.95
$275.00
Give your 2015-2020 BMW M3/M4 the protection it deserves with the Mishimoto Baffled Oil Catch Can Kit. The introduction of the S55 into the M3 and M4 in 2015 was the first time compact M’s saw turbos from the factory, but these engines brought along another long-standing tradition-blow-by. The Mishimoto BMW M3/M4 catch can kit uses proven engineering from the patent pending Mishimoto 2-Port Compact Baffled Oil Catch Can, with its 50-micron bronze filter and internal baffle, to better separate the oil from the crankcase vapors. The engineers at Mishimoto designed a CNC-machined lid that features large inlet and outlet ports to match the inner dimension of the CCV hose. This baffled oil catch can defends your intercooler, intake system, and VANOS system from oil blow-by and helps maintain proper octane levels to reduce potential detonation. The kit comes with two direct-fit hoses, which require no modification to the engine cover, and one direct-fit billet aluminum mounting bracket that is extremely easy to install and mounts the can in a serviceable location! Available with a color-matched bracket. Choose from 12 BMW specific color-matched options or classic black. Two aluminum, 3/4" barb fittings connect the hoses to the can. And, like every Mishimoto oil catch can, this baffled catch can kit comes with the Mishimoto Lifetime Warranty! Our catch cans are different from most air-oil-separator (AOS) systems on a few levels. First, our catch cans are not heated. This means that all of the blow-by is able to condense in the can, including low-octane oil vapors and contaminated fuel vapors. Most AOS systems also drain the blow-by back into the oil pan, while our catch cans trap the blow-by and keep it out of the engine permanently. If you’ve seen what we’ve seen in the bottom of our catch cans, you won’t want that draining back into your oil either.This Part Fits:
Year
Make
Model
Submodel
2019-2020
BMW
M2
Competition
2015-2018
BMW
M3
Base
2015-2020
BMW
M4
Base
2019-2020
BMW
M4
CS
2016
BMW
M4
GTS
Mishimoto 15-20 BMW F8X M3/M4 Baffled Oil Catch Can - Mineral White
$259.95
$275.00
Give your 2015-2020 BMW M3/M4 the protection it deserves with the Mishimoto Baffled Oil Catch Can Kit. The introduction of the S55 into the M3 and M4 in 2015 was the first time compact M’s saw turbos from the factory, but these engines brought along another long-standing tradition-blow-by. The Mishimoto BMW M3/M4 catch can kit uses proven engineering from the patent pending Mishimoto 2-Port Compact Baffled Oil Catch Can, with its 50-micron bronze filter and internal baffle, to better separate the oil from the crankcase vapors. The engineers at Mishimoto designed a CNC-machined lid that features large inlet and outlet ports to match the inner dimension of the CCV hose. This baffled oil catch can defends your intercooler, intake system, and VANOS system from oil blow-by and helps maintain proper octane levels to reduce potential detonation. The kit comes with two direct-fit hoses, which require no modification to the engine cover, and one direct-fit billet aluminum mounting bracket that is extremely easy to install and mounts the can in a serviceable location! Available with a color-matched bracket. Choose from 12 BMW specific color-matched options or classic black. Two aluminum, 3/4" barb fittings connect the hoses to the can. And, like every Mishimoto oil catch can, this baffled catch can kit comes with the Mishimoto Lifetime Warranty! Our catch cans are different from most air-oil-separator (AOS) systems on a few levels. First, our catch cans are not heated. This means that all of the blow-by is able to condense in the can, including low-octane oil vapors and contaminated fuel vapors. Most AOS systems also drain the blow-by back into the oil pan, while our catch cans trap the blow-by and keep it out of the engine permanently. If you’ve seen what we’ve seen in the bottom of our catch cans, you won’t want that draining back into your oil either.This Part Fits:
Year
Make
Model
Submodel
2019-2020
BMW
M2
Competition
2015-2018
BMW
M3
Base
2015-2020
BMW
M4
Base
2019-2020
BMW
M4
CS
2016
BMW
M4
GTS
Mishimoto 15-20 BMW F8X M3/M4 Baffled Oil Catch Can - Sakhir Orange
$259.95
$275.00
Give your 2015-2020 BMW M3/M4 the protection it deserves with the Mishimoto Baffled Oil Catch Can Kit. The introduction of the S55 into the M3 and M4 in 2015 was the first time compact M’s saw turbos from the factory, but these engines brought along another long-standing tradition-blow-by. The Mishimoto BMW M3/M4 catch can kit uses proven engineering from the patent pending Mishimoto 2-Port Compact Baffled Oil Catch Can, with its 50-micron bronze filter and internal baffle, to better separate the oil from the crankcase vapors. The engineers at Mishimoto designed a CNC-machined lid that features large inlet and outlet ports to match the inner dimension of the CCV hose. This baffled oil catch can defends your intercooler, intake system, and VANOS system from oil blow-by and helps maintain proper octane levels to reduce potential detonation. The kit comes with two direct-fit hoses, which require no modification to the engine cover, and one direct-fit billet aluminum mounting bracket that is extremely easy to install and mounts the can in a serviceable location! Available with a color-matched bracket. Choose from 12 BMW specific color-matched options or classic black. Two aluminum, 3/4" barb fittings connect the hoses to the can. And, like every Mishimoto oil catch can, this baffled catch can kit comes with the Mishimoto Lifetime Warranty! Our catch cans are different from most air-oil-separator (AOS) systems on a few levels. First, our catch cans are not heated. This means that all of the blow-by is able to condense in the can, including low-octane oil vapors and contaminated fuel vapors. Most AOS systems also drain the blow-by back into the oil pan, while our catch cans trap the blow-by and keep it out of the engine permanently. If you’ve seen what we’ve seen in the bottom of our catch cans, you won’t want that draining back into your oil either.This Part Fits:
Year
Make
Model
Submodel
2019-2020
BMW
M2
Competition
2015-2018
BMW
M3
Base
2015-2020
BMW
M4
Base
2019-2020
BMW
M4
CS
2016
BMW
M4
GTS
Mishimoto 15-20 BMW F8X M3/M4 Baffled Oil Catch Can - Silverstone
$327.55
$346.00
Give your 2015-2020 BMW M3/M4 the protection it deserves with the Mishimoto Baffled Oil Catch Can Kit. The introduction of the S55 into the M3 and M4 in 2015 was the first time compact M’s saw turbos from the factory, but these engines brought along another long-standing tradition-blow-by. The Mishimoto BMW M3/M4 catch can kit uses proven engineering from the patent pending Mishimoto 2-Port Compact Baffled Oil Catch Can, with its 50-micron bronze filter and internal baffle, to better separate the oil from the crankcase vapors. The engineers at Mishimoto designed a CNC-machined lid that features large inlet and outlet ports to match the inner dimension of the CCV hose. This baffled oil catch can defends your intercooler, intake system, and VANOS system from oil blow-by and helps maintain proper octane levels to reduce potential detonation. The kit comes with two direct-fit hoses, which require no modification to the engine cover, and one direct-fit billet aluminum mounting bracket that is extremely easy to install and mounts the can in a serviceable location! Available with a color-matched bracket. Choose from 12 BMW specific color-matched options or classic black. Two aluminum, 3/4" barb fittings connect the hoses to the can. And, like every Mishimoto oil catch can, this baffled catch can kit comes with the Mishimoto Lifetime Warranty! Our catch cans are different from most air-oil-separator (AOS) systems on a few levels. First, our catch cans are not heated. This means that all of the blow-by is able to condense in the can, including low-octane oil vapors and contaminated fuel vapors. Most AOS systems also drain the blow-by back into the oil pan, while our catch cans trap the blow-by and keep it out of the engine permanently. If you’ve seen what we’ve seen in the bottom of our catch cans, you won’t want that draining back into your oil either.This Part Fits:
Year
Make
Model
Submodel
2019-2020
BMW
M2
Competition
2015-2018
BMW
M3
Base
2015-2020
BMW
M4
Base
2019-2020
BMW
M4
CS
2016
BMW
M4
GTS
Mishimoto 15-20 BMW F8X M3/M4 Baffled Oil Catch Can - Yas Marina Blue
$259.95
$275.00
Give your 2015-2020 BMW M3/M4 the protection it deserves with the Mishimoto Baffled Oil Catch Can Kit. The introduction of the S55 into the M3 and M4 in 2015 was the first time compact M’s saw turbos from the factory, but these engines brought along another long-standing tradition-blow-by. The Mishimoto BMW M3/M4 catch can kit uses proven engineering from the patent pending Mishimoto 2-Port Compact Baffled Oil Catch Can, with its 50-micron bronze filter and internal baffle, to better separate the oil from the crankcase vapors. The engineers at Mishimoto designed a CNC-machined lid that features large inlet and outlet ports to match the inner dimension of the CCV hose. This baffled oil catch can defends your intercooler, intake system, and VANOS system from oil blow-by and helps maintain proper octane levels to reduce potential detonation. The kit comes with two direct-fit hoses, which require no modification to the engine cover, and one direct-fit billet aluminum mounting bracket that is extremely easy to install and mounts the can in a serviceable location! Available with a color-matched bracket. Choose from 12 BMW specific color-matched options or classic black. Two aluminum, 3/4" barb fittings connect the hoses to the can. And, like every Mishimoto oil catch can, this baffled catch can kit comes with the Mishimoto Lifetime Warranty! Our catch cans are different from most air-oil-separator (AOS) systems on a few levels. First, our catch cans are not heated. This means that all of the blow-by is able to condense in the can, including low-octane oil vapors and contaminated fuel vapors. Most AOS systems also drain the blow-by back into the oil pan, while our catch cans trap the blow-by and keep it out of the engine permanently. If you’ve seen what we’ve seen in the bottom of our catch cans, you won’t want that draining back into your oil either.This Part Fits:
Year
Make
Model
Submodel
2019-2020
BMW
M2
Competition
2015-2018
BMW
M3
Base
2015-2020
BMW
M4
Base
2019-2020
BMW
M4
CS
2016
BMW
M4
GTS
Mishimoto 15-20 BMW F8X M3/M4 License Plate Relocation Kit
$87.31
$92.00
BMW designers poured hours of time into the front end of the F8X M3 and M4 crafting every duct and body line to flow seamlessly with the rest of the car…then your local dealership spent 5 minutes with a drill and four drywall screws attaching the front license plate to the bumper.----The front of the F80 wasn’t designed for a US front plate. Placing the plate in the center of the bumper obstructs air flow to the radiator while also creating wind resistance. Mounting to the side requires drilling into and ruining your brand-new bumper. Luckily, there's no need to worry about drilling holes in your new bumper because Mishimoto has a solution----Designed specifically for the 2015-2020 BMW F8X M3 and M4, our license plate relocation kit is constructed from high-strength, anodized, and powder coated 6061-aluminum. It mounts directly to the OEM tow hook location, allowing for a clean and seamless installation. We’ve angled the plate to match the lines of the bumper and mounted it securely using the factory tow hook location to improve aerodynamics and allow airflow through the cooling stack. Our license plate relocation kit includes all necessary hardware for an easy installation and, like all our products, this kit includes our signature Mishimoto Lifetime Warranty.User 1This Part Fits:
Year
Make
Model
Submodel
2015-2018
BMW
M3
Base
2015-2020
BMW
M4
Base
2019-2020
BMW
M4
CS
2016
BMW
M4
GTS