PRP

Weve developed the easiest to install doors on the market. They look pretty good too. Even if youre not handy with your tools, PRPs Steel Frame Doors should take you less than half an hour to install. Just unbolt the stock doors, bolt on the new set, add the skins and transfer the latch. A little fine tuning and your done. The aluminum panels are secured quickly onto the sturdy, all steel frames with Dzus tabs and weather stripping along the frame keeps the rattle to a minimum. Protect yourself and your passenger with PRP Doors. Easy Install; Attaches to Stock Hinges with Stock Hardware Sturdy, Powdercoated Steel Frame Construction Wont Weather and Crack like Aluminum Frames Weather Stripping Along Frame to Reduce Rattle Bolt-on; No Modifications Necessary Attributes: GTIN: 00603784098166 Brand Name: PRP Color Code: 10 Variant: Position: Rear Warranty: 1 year Extended Information: Country of Origin: United States Emissions : Emissions Compliance Exempt Life Cycle Status: Available To Order Packing Information: Quantity of Each: 1 Package UOM: EA Dimension: 39.0 x 10.0 x 42.0 inches Weight: 62.0 lb PDF: PDF: HNWY_D15-INS_001

Add an extra seat with PRP Seats GT/S.E. rear suspension bench for your 4-seater. The GT/S.E. bench matches the style of our best-selling GT/S.E. seat and converts your UTV to a 5 seat. Our standard mesh drain allows water, mud, and dirt to drain out the bottom, rather than pile up in the seat. Built to bolt to your stock rear seat bases with the stock hardware. These Rear Benches are 3 in. shorter depth than the fronts, to allow for more legroom. Rear Bench For Your 4-Seater Match Your Front GT/S.E. Suspension Seats Harness Slots for Three Riders Direct Bolt-In or Adapter Mounts Required Design your own and Make it Yours! With over 60+ different colors and materials to choose from, you can customize the perfect seat for your ride Extra options available include Front Goggle Pockets, Rear Storage Pockets, Water Paks, Heated Seats, Air Lumbar, and various Diamond Stitches Attributes: GTIN: Brand Name: PRP Add-On: Add-Ons;O21;Water Pocket Color Code: 00 Warranty: 1 year Extended Information: Country of Origin: United States Emissions : Emissions Compliance Exempt Life Cycle Status: Available To Order Packing Information: Quantity of Each: 1 Package UOM: EA Dimension: 49.0 x 40.0 x 18.0 inches Weight: 50.0 lb PDF: PDF: HNWY_PolarisRZRProXPRearSeats-INS_001

Need a little extra room in the back of your UTV for that third kid PRPs GT3 bench seat converts your 4-seater into a 5-seater. Most options - like heaters, pockets, and lumbar - are available so you can match your front GT3 Seats. With openings for 3 riders, you can add 4 or 5 point harnesses and everyone will be locked in and safe. These rear benches are 3 inches shorter depth than the fronts, to allow for more legroom. The Next Generation of PRPs Most Popular Rear Bench Seat Add an Extra Seat in the Back of your UTV Harness Slots for Three Riders Shortened for More Rear Leg Room Large Harness Openings for Easy Seat Removal Design your own and Make it Yours! With over 60+ different colors and materials to choose from, you can customize the perfect seat for your ride Extra options available include Front Goggle Pockets, Rear Storage Pockets, Water Paks, Heated Seats, Air Lumbar, and various Diamond Stitches Attributes: GTIN: Brand Name: PRP Add-On: Add-Ons;O21;Water Pocket Color Code: 00 Warranty: 1 year Extended Information: Country of Origin: United States Emissions : Emissions Compliance Exempt Life Cycle Status: Available To Order Packing Information: Quantity of Each: 1 Package UOM: EA Dimension: 49.0 x 40.0 x 18.0 inches Weight: 50.0 lb PDF: PDF: HNWY_PolarisRZRProXPRearSeats-INS_001

Need a little extra room in the back of your UTV for that third kid PRPs High Back bench seat converts your 4-seater into a 5-seater. Most options - like heaters, pockets, and lumbar - are available so you can match your front High Back seats. With openings for 3 riders, you can add 4 or 5 point harnesses and everyone will be locked in and safe. These Rear Benches are 3 inches shorter depth than the fronts to allow for more legroom. Make your UTV a 5-Seater! Enough Harness Slots for Three Riders Built with Two Headrests Direct Bolt-In or Adapter Mounts Required Design your own and Make it Yours! With over 60+ different colors and materials to choose from, you can customize the perfect seat for your ride Extra options available include Front Goggle Pockets, Rear Storage Pockets, Water Paks, Heated Seats, Air Lumbar, and various Diamond Stitches Attributes: GTIN: Brand Name: PRP Add-On: Add-Ons;O30B;Bench Double Stitch Color Code: 00 Warranty: 1 year Extended Information: Country of Origin: United States Emissions : Emissions Compliance Exempt Life Cycle Status: Available To Order Packing Information: Quantity of Each: 1 Package UOM: EA Dimension: 49.0 x 40.0 x 18.0 inches Weight: 50.0 lb PDF: PDF: HNWY_PolarisRZRProXPRearSeats-INS_001

Add an extra seat with PRP Seats RST Rear Suspension Bench. The RST bench matches the style of our RST front seats and converts your UTV to a 5-seat. Our standard mesh drain allows water, mud, and dirt to drain out the bottom, rather than pile up in the seat. Built with slots to fit up to 3 smaller riders. These Rear Benches are 3 inches shorter depth than the fronts, to allow for more legroom. Make your UTV a 5-Seater! Match your Front RST Suspension Seats Harness Slots for Three Riders Direct Bolt-In or Adapter Mounts Required Attributes: GTIN: 00603784103310 Brand Name: PRP Color Code: 201 Variant: Color: Black Warranty: 1 year Extended Information: Country of Origin: United States Emissions : Emissions Compliance Exempt Life Cycle Status: Available To Order Packing Information: Quantity of Each: 1 Package UOM: EA Dimension: 49.0 x 40.0 x 18.0 inches Weight: 50.0 lb PDF: PDF: HNWY_PolarisRZRProXPRearSeats-INS_001

Add an extra seat with PRP Seats RST Rear Suspension Bench. The RST bench matches the style of our RST front seats and converts your UTV to a 5-seat. Our standard mesh drain allows water, mud, and dirt to drain out the bottom, rather than pile up in the seat. Built with slots to fit up to 3 smaller riders. These Rear Benches are 3 inches shorter depth than the fronts, to allow for more legroom. Make your UTV a 5-Seater! Match your Front RST Suspension Seats Harness Slots for Three Riders Direct Bolt-In or Adapter Mounts Required Design your own and Make it Yours! With over 60+ different colors and materials to choose from, you can customize the perfect seat for your ride Extra options available include Front Goggle Pockets, Rear Storage Pockets, Water Paks, Heated Seats, Air Lumbar, and various Diamond Stitches Attributes: GTIN: Brand Name: PRP Add-On: Add-Ons;O30B;Bench Double Stitch Color Code: 00 Warranty: 1 year Extended Information: Country of Origin: United States Emissions : Emissions Compliance Exempt Life Cycle Status: Available To Order Packing Information: Quantity of Each: 1 Package UOM: EA Dimension: 49.0 x 40.0 x 18.0 inches Weight: 50.0 lb PDF: PDF: HNWY_PolarisRZRProXPRearSeats-INS_001

Add an extra seat with PRP Seats RST Rear Suspension Bench. The RST bench matches the style of our RST front seats and converts your UTV to a 5-seat. Our standard mesh drain allows water, mud, and dirt to drain out the bottom, rather than pile up in the seat. Built with slots to fit up to 3 smaller riders. These Rear Benches are 3 inches shorter depth than the fronts, to allow for more legroom. Make your UTV a 5-Seater! Match your Front RST Suspension Seats Harness Slots for Three Riders Direct Bolt-In or Adapter Mounts Required Attributes: GTIN: 00603784103341 Brand Name: PRP Color Code: V Variant: Color: Blue Warranty: 1 year Extended Information: Country of Origin: United States Emissions : Emissions Compliance Exempt Life Cycle Status: Available To Order Packing Information: Quantity of Each: 1 Package UOM: EA Dimension: 49.0 x 40.0 x 18.0 inches Weight: 50.0 lb PDF: PDF: HNWY_PolarisRZRProXPRearSeats-INS_001

Add an extra seat with PRP Seats RST Rear Suspension Bench. The RST bench matches the style of our RST front seats and converts your UTV to a 5-seat. Our standard mesh drain allows water, mud, and dirt to drain out the bottom, rather than pile up in the seat. Built with slots to fit up to 3 smaller riders. These Rear Benches are 3 inches shorter depth than the fronts, to allow for more legroom. Make your UTV a 5-Seater! Match your Front RST Suspension Seats Harness Slots for Three Riders Direct Bolt-In or Adapter Mounts Required Attributes: GTIN: 00603784103327 Brand Name: PRP Color Code: 203 Variant: Color: Grey Warranty: 1 year Extended Information: Country of Origin: United States Emissions : Emissions Compliance Exempt Life Cycle Status: Available To Order Packing Information: Quantity of Each: 1 Package UOM: EA Dimension: 49.0 x 40.0 x 18.0 inches Weight: 50.0 lb PDF: PDF: HNWY_PolarisRZRProXPRearSeats-INS_001

Add an extra seat with PRP Seats RST Rear Suspension Bench. The RST bench matches the style of our RST front seats and converts your UTV to a 5-seat. Our standard mesh drain allows water, mud, and dirt to drain out the bottom, rather than pile up in the seat. Built with slots to fit up to 3 smaller riders. These Rear Benches are 3 inches shorter depth than the fronts, to allow for more legroom. Make your UTV a 5-Seater! Match your Front RST Suspension Seats Harness Slots for Three Riders Direct Bolt-In or Adapter Mounts Required Attributes: GTIN: 00603784103334 Brand Name: PRP Color Code: 204 Variant: Color: Red Warranty: 1 year Extended Information: Country of Origin: United States Emissions : Emissions Compliance Exempt Life Cycle Status: Available To Order Packing Information: Quantity of Each: 1 Package UOM: EA Dimension: 49.0 x 40.0 x 18.0 inches Weight: 50.0 lb PDF: PDF: HNWY_PolarisRZRProXPRearSeats-INS_001

Add an extra seat with PRP Seats XC Rear Suspension Bench for your 4-seater. The XC bench matches the style of our best-selling XC seat and converts your UTV to a 5-seater. The bench features low bolsters on the sides, so you can get in and out easily. The vinyl coated nylon suspension liner and dual-density foam decrease the impact on the body, reducing the fatigue you feel after a long day in the dirt or dunes. Our standard mesh drain allows water, mud, and dirt to drain out the bottom, rather than pile up in the seat. Match Your Front XC Suspension Seats Low Sides - Make it Easy to Get In and Out Harness Slots for 3 Riders Direct Bolt-In or Adapter Mounts Required Design your own and Make it Yours! With over 60+ different colors and materials to choose from, you can customize the perfect seat for your ride Extra options available include Front Goggle Pockets, Rear Storage Pockets, Water Paks, Heated Seats, Air Lumbar, and various Diamond Stitches Attributes: GTIN: Brand Name: PRP Add-On: Add-Ons;O21;Water Pocket Color Code: 00 Warranty: 1 year Extended Information: Country of Origin: United States Emissions : Emissions Compliance Exempt Life Cycle Status: Available To Order Packing Information: Quantity of Each: 1 Package UOM: EA Dimension: 49.0 x 40.0 x 18.0 inches Weight: 50.0 lb PDF: PDF: HNWY_PolarisRZRProXPRearSeats-INS_001

Looking for a little more protection Add these window nets to your UTV and keep yourself protected. Manufactured from a nylon mesh and webbing, these nets attach easily and are designed to work with your opening doors. These are built to work perfectly with your factory doors and factory roll cage. These nets are sold as a pair and include both the left and right side nets. Reuses stock hardware for installation. Not SFI Certified for Racing. Protect Your Passengers and Keep Those Limbs Inside Your UTV in the Event of a Rollover Sold as a Pair Attributes: GTIN: 00603784103075 Brand Name: PRP Color Code: 00 Variant: Material: Mesh Warranty: 1 year Extended Information: Country of Origin: Taiwan Emissions : Emissions Compliance Exempt Life Cycle Status: Available To Order Packing Information: Quantity of Each: 1 Package UOM: EA Dimension: 6.0 x 6.0 x 30.0 inches Weight: 4.0 lb

Looking for a little more protection Add these window nets to your UTV and keep yourself protected. Manufactured from a nylon mesh and webbing, these nets attach easily and are designed to work with your opening doors. These are built to work perfectly with your factory doors and factory roll cage. These nets are sold as a pair and include both the left and right side nets. Reuses stock hardware for installation. Not SFI Certified for Racing. Protect Your Passengers and Keep Those Limbs Inside Your UTV in the Event of a Rollover Sold as a Pair Attributes: GTIN: 00603784099712 Brand Name: PRP Color Code: 00 Variant: Material: Mesh Warranty: 1 year Extended Information: Country of Origin: Taiwan Emissions : Emissions Compliance Exempt Life Cycle Status: Available To Order Packing Information: Quantity of Each: 1 Package UOM: EA Dimension: 22.0 x 6.0 x 6.0 inches Weight: 2.0 lb

The High Back UTV seat offers an affordable yet extremely comfortable option for your UTV. Featuring a simple and classic style, the High Back is constructed of the same high end materials as PRPs other suspension seats. PRPs Original UTV Seat Classic Styling Medium Containment - Side Bolsters Keep You Secure in Rough Terrain, But Are Still Easy to Get In and Out Direct Bolt-In or Adapter Mounts Available to Fit Most UTV Models Design your own and Make it Yours! With over 60+ different colors and materials to choose from, you can customize the perfect seat for your ride Extra options available include Front Goggle Pockets, Rear Storage Pockets, Water Paks, Heated Seats, Air Lumbar, and various Diamond Stitches Attributes: GTIN: Brand Name: PRP Add-On: Add-Ons;O30;Seat Double Stitch Color Code: 00 Warranty: 1 year Extended Information: Country of Origin: United States Life Cycle Status: Available To Order Emissions : Emissions Compliance Exempt Packing Information: Quantity of Each: 1 Package UOM: EA Dimension: 22.0 x 24.0 x 38.0 inches Weight: 20.0 lb PDF: PDF: HNWY_TextronHavocSeats-INS_001

With 7 inches of containment, the Premier is PRPs versatile, all-around, off-road suspension seat. A great classic seat for Jeeps, buggies, trail rigs, and prerunners. Medium level containment on the sides keeps you secure when the ride gets rough, but still makes it easy to get in and out of the vehicle. The vinyl-coated nylon suspension liner and dual-density foam decrease the impact on the body, reducing the fatigue you feel after a long day in the dirt or dunes. Like all of PRPs Classic Series seats, the Premier can be built up to 4 inches taller and 2 inches wider (be sure to measure your vehicle to see if you have enough room). As an alternative to the height options, you can change the classic hoop to an adjustable headrest, or eliminate the headrest altogether for that vintage low back look. PRPs Original Suspension Seat Classic Style Mid-Sized Containment for a Wide Range of Uses High Back Dimensions: 31 in. Tall (33 in. for 2-inch Extra Tall; 35 in. for 4-inch Extra Tall) x 21 in. Wide (23 in. for Extra Wide) x 26 in. Deep Low Back Dimensions: 24 in. Tall (29 in. with Adjustable Headrest) x 21 in. Wide (23 in. for Extra Wide) x 26 in. Deep Mounting Area: 14 in. Wide (16 in. for Extra Wide) x 18 in. Front to Back Design your own and Make it Yours! With over 60+ different colors and materials to choose from, you can customize the perfect seat for your ride Extra options available include Front Goggle Pockets, Rear Storage Pockets, Water Paks, Heated Seats, Air Lumbar, and various Diamond Stitches Attributes: GTIN: Brand Name: PRP Add-On: Add-Ons;O30;Seat Double Stitch Color Code: 00 High Back Dimensions: 31 in. Tall (33 in. for 2-inch Extra Tall; 35 in. for 4-inch Extra Tall) x 21 in. Wide (23 in. for Extra Wide) x 26 in. Deep Low Back Dimensions: 24 in. Tall (29 in. with Adjustable Headrest) x 21 in. Wide (23 in. for Extra Wide) x 26 in. Deep Mounting Area: 14 in. Wide (16 in. for Extra Wide) x 18 in. Front to Back Variant: Width: Standard Width; Height: 2 inch Extra Tall; Depth: Standard Depth Warranty: 1 year Extended Information: Country of Origin: United States Emissions : Emissions Compliance Exempt Life Cycle Status: Available To Order Packing Information: Quantity of Each: 1 Package UOM: EA Dimension: 22.0 x 24.0 x 38.0 inches Weight: 20.0 lb

With 7 inches of containment, the Premier is PRPs versatile, all-around, off-road suspension seat. A great classic seat for Jeeps, buggies, trail rigs, and prerunners. Medium level containment on the sides keeps you secure when the ride gets rough, but still makes it easy to get in and out of the vehicle. The vinyl-coated nylon suspension liner and dual-density foam decrease the impact on the body, reducing the fatigue you feel after a long day in the dirt or dunes. Like all of PRPs Classic Series seats, the Premier can be built up to 4 inches taller and 2 inches wider (be sure to measure your vehicle to see if you have enough room). As an alternative to the height options, you can change the classic hoop to an adjustable headrest, or eliminate the headrest altogether for that vintage low back look. PRPs Original Suspension Seat Classic Style Mid-Sized Containment for a Wide Range of Uses High Back Dimensions: 31 in. Tall (33 in. for 2-inch Extra Tall; 35 in. for 4-inch Extra Tall) x 21 in. Wide (23 in. for Extra Wide) x 26 in. Deep Low Back Dimensions: 24 in. Tall (29 in. with Adjustable Headrest) x 21 in. Wide (23 in. for Extra Wide) x 26 in. Deep Mounting Area: 14 in. Wide (16 in. for Extra Wide) x 18 in. Front to Back Design your own and Make it Yours! With over 60+ different colors and materials to choose from, you can customize the perfect seat for your ride Extra options available include Front Goggle Pockets, Rear Storage Pockets, Water Paks, Heated Seats, Air Lumbar, and various Diamond Stitches Attributes: GTIN: Brand Name: PRP Add-On: Add-Ons;O30;Seat Double Stitch Color Code: 00 High Back Dimensions: 31 in. Tall (33 in. for 2-inch Extra Tall; 35 in. for 4-inch Extra Tall) x 21 in. Wide (23 in. for Extra Wide) x 26 in. Deep Low Back Dimensions: 24 in. Tall (29 in. with Adjustable Headrest) x 21 in. Wide (23 in. for Extra Wide) x 26 in. Deep Mounting Area: 14 in. Wide (16 in. for Extra Wide) x 18 in. Front to Back Variant: Width: 2 inch Extra Wide; Height: 2 inch Extra Tall; Depth: Standard Depth Warranty: 1 year Extended Information: Country of Origin: United States Emissions : Emissions Compliance Exempt Life Cycle Status: Available To Order Packing Information: Quantity of Each: 1 Package UOM: EA Dimension: 22.0 x 24.0 x 38.0 inches Weight: 20.0 lb

With 7 inches of containment, the Premier is PRPs versatile, all-around, off-road suspension seat. A great classic seat for Jeeps, buggies, trail rigs, and prerunners. Medium level containment on the sides keeps you secure when the ride gets rough, but still makes it easy to get in and out of the vehicle. The vinyl-coated nylon suspension liner and dual-density foam decrease the impact on the body, reducing the fatigue you feel after a long day in the dirt or dunes. Like all of PRPs Classic Series seats, the Premier can be built up to 4 inches taller and 2 inches wider (be sure to measure your vehicle to see if you have enough room). As an alternative to the height options, you can change the classic hoop to an adjustable headrest, or eliminate the headrest altogether for that vintage low back look. PRPs Original Suspension Seat Classic Style Mid-Sized Containment for a Wide Range of Uses High Back Dimensions: 31 in. Tall (33 in. for 2-inch Extra Tall; 35 in. for 4-inch Extra Tall) x 21 in. Wide (23 in. for Extra Wide) x 26 in. Deep Low Back Dimensions: 24 in. Tall (29 in. with Adjustable Headrest) x 21 in. Wide (23 in. for Extra Wide) x 26 in. Deep Mounting Area: 14 in. Wide (16 in. for Extra Wide) x 18 in. Front to Back Design your own and Make it Yours! With over 60+ different colors and materials to choose from, you can customize the perfect seat for your ride Extra options available include Front Goggle Pockets, Rear Storage Pockets, Water Paks, Heated Seats, Air Lumbar, and various Diamond Stitches Attributes: GTIN: Brand Name: PRP Add-On: Add-Ons;O30;Seat Double Stitch Color Code: 00 High Back Dimensions: 31 in. Tall (33 in. for 2-inch Extra Tall; 35 in. for 4-inch Extra Tall) x 21 in. Wide (23 in. for Extra Wide) x 26 in. Deep Low Back Dimensions: 24 in. Tall (29 in. with Adjustable Headrest) x 21 in. Wide (23 in. for Extra Wide) x 26 in. Deep Mounting Area: 14 in. Wide (16 in. for Extra Wide) x 18 in. Front to Back Variant: Width: Standard Width; Height: 4 inch Extra Tall; Depth: Standard Depth Warranty: 1 year Extended Information: Country of Origin: United States Emissions : Emissions Compliance Exempt Life Cycle Status: Available To Order Packing Information: Quantity of Each: 1 Package UOM: EA Dimension: 22.0 x 24.0 x 38.0 inches Weight: 20.0 lb

With 7 inches of containment, the Premier is PRPs versatile, all-around, off-road suspension seat. A great classic seat for Jeeps, buggies, trail rigs, and prerunners. Medium level containment on the sides keeps you secure when the ride gets rough, but still makes it easy to get in and out of the vehicle. The vinyl-coated nylon suspension liner and dual-density foam decrease the impact on the body, reducing the fatigue you feel after a long day in the dirt or dunes. Like all of PRPs Classic Series seats, the Premier can be built up to 4 inches taller and 2 inches wider (be sure to measure your vehicle to see if you have enough room). As an alternative to the height options, you can change the classic hoop to an adjustable headrest, or eliminate the headrest altogether for that vintage low back look. PRPs Original Suspension Seat Classic Style Mid-Sized Containment for a Wide Range of Uses High Back Dimensions: 31 in. Tall (33 in. for 2-inch Extra Tall; 35 in. for 4-inch Extra Tall) x 21 in. Wide (23 in. for Extra Wide) x 26 in. Deep Low Back Dimensions: 24 in. Tall (29 in. with Adjustable Headrest) x 21 in. Wide (23 in. for Extra Wide) x 26 in. Deep Mounting Area: 14 in. Wide (16 in. for Extra Wide) x 18 in. Front to Back Design your own and Make it Yours! With over 60+ different colors and materials to choose from, you can customize the perfect seat for your ride Extra options available include Front Goggle Pockets, Rear Storage Pockets, Water Paks, Heated Seats, Air Lumbar, and various Diamond Stitches Attributes: GTIN: Brand Name: PRP Variant: Width: 2 inch Extra Wide; Height: 4 inch Extra Tall; Depth: Standard Depth Warranty: 1 year Add-On: Add-Ons;O30;Seat Double Stitch Color Code: 00 High Back Dimensions: 31 in. Tall (33 in. for 2-inch Extra Tall; 35 in. for 4-inch Extra Tall) x 21 in. Wide (23 in. for Extra Wide) x 26 in. Deep Low Back Dimensions: 24 in. Tall (29 in. with Adjustable Headrest) x 21 in. Wide (23 in. for Extra Wide) x 26 in. Deep Mounting Area: 14 in. Wide (16 in. for Extra Wide) x 18 in. Front to Back Extended Information: Country of Origin: United States Emissions : Emissions Compliance Exempt Life Cycle Status: Available To Order Packing Information: Quantity of Each: 1 Package UOM: EA Dimension: 22.0 x 24.0 x 38.0 inches Weight: 20.0 lb

With 7 inches of containment, the Premier is PRPs versatile, all-around, off-road suspension seat. A great classic seat for Jeeps, buggies, trail rigs, and prerunners. Medium level containment on the sides keeps you secure when the ride gets rough, but still makes it easy to get in and out of the vehicle. The vinyl-coated nylon suspension liner and dual-density foam decrease the impact on the body, reducing the fatigue you feel after a long day in the dirt or dunes. Like all of PRPs Classic Series seats, the Premier can be built up to 4 inches taller and 2 inches wider (be sure to measure your vehicle to see if you have enough room). As an alternative to the height options, you can change the classic hoop to an adjustable headrest, or eliminate the headrest altogether for that vintage low back look. PRPs Original Suspension Seat Classic Style Mid-Sized Containment for a Wide Range of Uses High Back Dimensions: 31 in. Tall (33 in. for 2-inch Extra Tall; 35 in. for 4-inch Extra Tall) x 21 in. Wide (23 in. for Extra Wide) x 26 in. Deep Low Back Dimensions: 24 in. Tall (29 in. with Adjustable Headrest) x 21 in. Wide (23 in. for Extra Wide) x 26 in. Deep Mounting Area: 14 in. Wide (16 in. for Extra Wide) x 18 in. Front to Back Design your own and Make it Yours! With over 60+ different colors and materials to choose from, you can customize the perfect seat for your ride Extra options available include Front Goggle Pockets, Rear Storage Pockets, Water Paks, Heated Seats, Air Lumbar, and various Diamond Stitches Attributes: GTIN: Brand Name: PRP Add-On: Add-Ons;O30B;Bench Double Stitch Color Code: 00 High Back Dimensions: 31 in. Tall (33 in. for 2-inch Extra Tall; 35 in. for 4-inch Extra Tall) x 21 in. Wide (23 in. for Extra Wide) x 26 in. Deep Low Back Dimensions: 24 in. Tall (29 in. with Adjustable Headrest) x 21 in. Wide (23 in. for Extra Wide) x 26 in. Deep Mounting Area: 14 in. Wide (16 in. for Extra Wide) x 18 in. Front to Back Variant: Width: Standard Width; Height: Standard Height; Depth: 3 inch Short (Rear) Warranty: 1 year Extended Information: Country of Origin: United States Emissions : Emissions Compliance Exempt Life Cycle Status: Available To Order Packing Information: Quantity of Each: 1 Package UOM: EA Dimension: 22.0 x 24.0 x 38.0 inches Weight: 20.0 lb

With 7 inches of containment, the Premier is PRPs versatile, all-around, off-road suspension seat. A great classic seat for Jeeps, buggies, trail rigs, and prerunners. Medium level containment on the sides keeps you secure when the ride gets rough, but still makes it easy to get in and out of the vehicle. The vinyl-coated nylon suspension liner and dual-density foam decrease the impact on the body, reducing the fatigue you feel after a long day in the dirt or dunes. Like all of PRPs Classic Series seats, the Premier can be built up to 4 inches taller and 2 inches wider (be sure to measure your vehicle to see if you have enough room). As an alternative to the height options, you can change the classic hoop to an adjustable headrest, or eliminate the headrest altogether for that vintage low back look. PRPs Original Suspension Seat Classic Style Mid-Sized Containment for a Wide Range of Uses High Back Dimensions: 31 in. Tall (33 in. for 2-inch Extra Tall; 35 in. for 4-inch Extra Tall) x 21 in. Wide (23 in. for Extra Wide) x 26 in. Deep Low Back Dimensions: 24 in. Tall (29 in. with Adjustable Headrest) x 21 in. Wide (23 in. for Extra Wide) x 26 in. Deep Mounting Area: 14 in. Wide (16 in. for Extra Wide) x 18 in. Front to Back Design your own and Make it Yours! With over 60+ different colors and materials to choose from, you can customize the perfect seat for your ride Extra options available include Front Goggle Pockets, Rear Storage Pockets, Water Paks, Heated Seats, Air Lumbar, and various Diamond Stitches Attributes: GTIN: Brand Name: PRP Add-On: Add-Ons;O30;Seat Double Stitch Color Code: 00 High Back Dimensions: 31 in. Tall (33 in. for 2-inch Extra Tall; 35 in. for 4-inch Extra Tall) x 21 in. Wide (23 in. for Extra Wide) x 26 in. Deep Low Back Dimensions: 24 in. Tall (29 in. with Adjustable Headrest) x 21 in. Wide (23 in. for Extra Wide) x 26 in. Deep Mounting Area: 14 in. Wide (16 in. for Extra Wide) x 18 in. Front to Back Variant: Width: Standard Width; Height: Standard Height; Depth: Standard Depth Warranty: 1 year Extended Information: Country of Origin: United States Emissions : Emissions Compliance Exempt Life Cycle Status: Available To Order Packing Information: Quantity of Each: 1 Package UOM: EA Dimension: 22.0 x 24.0 x 38.0 inches Weight: 20.0 lb

With 7 inches of containment, the Premier is PRPs versatile, all-around, off-road suspension seat. A great classic seat for Jeeps, buggies, trail rigs, and prerunners. Medium level containment on the sides keeps you secure when the ride gets rough, but still makes it easy to get in and out of the vehicle. The vinyl-coated nylon suspension liner and dual-density foam decrease the impact on the body, reducing the fatigue you feel after a long day in the dirt or dunes. Like all of PRPs Classic Series seats, the Premier can be built up to 4 inches taller and 2 inches wider (be sure to measure your vehicle to see if you have enough room). As an alternative to the height options, you can change the classic hoop to an adjustable headrest, or eliminate the headrest altogether for that vintage low back look. PRPs Original Suspension Seat Classic Style Mid-Sized Containment for a Wide Range of Uses High Back Dimensions: 31 in. Tall (33 in. for 2-inch Extra Tall; 35 in. for 4-inch Extra Tall) x 21 in. Wide (23 in. for Extra Wide) x 26 in. Deep Low Back Dimensions: 24 in. Tall (29 in. with Adjustable Headrest) x 21 in. Wide (23 in. for Extra Wide) x 26 in. Deep Mounting Area: 14 in. Wide (16 in. for Extra Wide) x 18 in. Front to Back Attributes: GTIN: 00603784103969 Brand Name: PRP Color Code: 50 High Back Dimensions: 31 in. Tall (33 in. for 2-inch Extra Tall; 35 in. for 4-inch Extra Tall) x 21 in. Wide (23 in. for Extra Wide) x 26 in. Deep Low Back Dimensions: 24 in. Tall (29 in. with Adjustable Headrest) x 21 in. Wide (23 in. for Extra Wide) x 26 in. Deep Mounting Area: 14 in. Wide (16 in. for Extra Wide) x 18 in. Front to Back Variant: Color: Black Warranty: 1 year Extended Information: Country of Origin: United States Emissions : Emissions Compliance Exempt Life Cycle Status: Available To Order Packing Information: Quantity of Each: 1 Package UOM: EA Dimension: 22.0 x 24.0 x 38.0 inches Weight: 20.0 lb

With 7 inches of containment, the Premier is PRPs versatile, all-around, off-road suspension seat. A great classic seat for Jeeps, buggies, trail rigs, and prerunners. Medium level containment on the sides keeps you secure when the ride gets rough, but still makes it easy to get in and out of the vehicle. The vinyl-coated nylon suspension liner and dual-density foam decrease the impact on the body, reducing the fatigue you feel after a long day in the dirt or dunes. Like all of PRPs Classic Series seats, the Premier can be built up to 4 inches taller and 2 inches wider (be sure to measure your vehicle to see if you have enough room). As an alternative to the height options, you can change the classic hoop to an adjustable headrest, or eliminate the headrest altogether for that vintage low back look. PRPs Original Suspension Seat Classic Style Mid-Sized Containment for a Wide Range of Uses High Back Dimensions: 31 in. Tall (33 in. for 2-inch Extra Tall; 35 in. for 4-inch Extra Tall) x 21 in. Wide (23 in. for Extra Wide) x 26 in. Deep Low Back Dimensions: 24 in. Tall (29 in. with Adjustable Headrest) x 21 in. Wide (23 in. for Extra Wide) x 26 in. Deep Mounting Area: 14 in. Wide (16 in. for Extra Wide) x 18 in. Front to Back Attributes: GTIN: 00603784103976 Brand Name: PRP Color Code: 54 High Back Dimensions: 31 in. Tall (33 in. for 2-inch Extra Tall; 35 in. for 4-inch Extra Tall) x 21 in. Wide (23 in. for Extra Wide) x 26 in. Deep Low Back Dimensions: 24 in. Tall (29 in. with Adjustable Headrest) x 21 in. Wide (23 in. for Extra Wide) x 26 in. Deep Mounting Area: 14 in. Wide (16 in. for Extra Wide) x 18 in. Front to Back Variant: Color: Grey Warranty: 1 year Extended Information: Country of Origin: United States Emissions : Emissions Compliance Exempt Life Cycle Status: Available To Order Packing Information: Quantity of Each: 1 Package UOM: EA Dimension: 22.0 x 24.0 x 38.0 inches Weight: 20.0 lb

With 7 inches of containment, the Premier is PRPs versatile, all-around, off-road suspension seat. A great classic seat for Jeeps, buggies, trail rigs, and prerunners. Medium level containment on the sides keeps you secure when the ride gets rough, but still makes it easy to get in and out of the vehicle. The vinyl-coated nylon suspension liner and dual-density foam decrease the impact on the body, reducing the fatigue you feel after a long day in the dirt or dunes. Like all of PRPs Classic Series seats, the Premier can be built up to 4 inches taller and 2 inches wider (be sure to measure your vehicle to see if you have enough room). As an alternative to the height options, you can change the classic hoop to an adjustable headrest, or eliminate the headrest altogether for that vintage low back look. PRPs Original Suspension Seat Classic Style Mid-Sized Containment for a Wide Range of Uses High Back Dimensions: 31 in. Tall (33 in. for 2-inch Extra Tall; 35 in. for 4-inch Extra Tall) x 21 in. Wide (23 in. for Extra Wide) x 26 in. Deep Low Back Dimensions: 24 in. Tall (29 in. with Adjustable Headrest) x 21 in. Wide (23 in. for Extra Wide) x 26 in. Deep Mounting Area: 14 in. Wide (16 in. for Extra Wide) x 18 in. Front to Back Attributes: GTIN: 00603784103990 Brand Name: PRP Color Code: 71 High Back Dimensions: 31 in. Tall (33 in. for 2-inch Extra Tall; 35 in. for 4-inch Extra Tall) x 21 in. Wide (23 in. for Extra Wide) x 26 in. Deep Low Back Dimensions: 24 in. Tall (29 in. with Adjustable Headrest) x 21 in. Wide (23 in. for Extra Wide) x 26 in. Deep Mounting Area: 14 in. Wide (16 in. for Extra Wide) x 18 in. Front to Back Variant: Color: Blue/Black Warranty: 1 year Extended Information: Country of Origin: United States Emissions : Emissions Compliance Exempt Life Cycle Status: Available To Order Packing Information: Quantity of Each: 1 Package UOM: EA Dimension: 22.0 x 24.0 x 38.0 inches Weight: 20.0 lb

With 7 inches of containment, the Premier is PRPs versatile, all-around, off-road suspension seat. A great classic seat for Jeeps, buggies, trail rigs, and prerunners. Medium level containment on the sides keeps you secure when the ride gets rough, but still makes it easy to get in and out of the vehicle. The vinyl-coated nylon suspension liner and dual-density foam decrease the impact on the body, reducing the fatigue you feel after a long day in the dirt or dunes. Like all of PRPs Classic Series seats, the Premier can be built up to 4 inches taller and 2 inches wider (be sure to measure your vehicle to see if you have enough room). As an alternative to the height options, you can change the classic hoop to an adjustable headrest, or eliminate the headrest altogether for that vintage low back look. PRPs Original Suspension Seat Classic Style Mid-Sized Containment for a Wide Range of Uses High Back Dimensions: 31 in. Tall (33 in. for 2-inch Extra Tall; 35 in. for 4-inch Extra Tall) x 21 in. Wide (23 in. for Extra Wide) x 26 in. Deep Low Back Dimensions: 24 in. Tall (29 in. with Adjustable Headrest) x 21 in. Wide (23 in. for Extra Wide) x 26 in. Deep Mounting Area: 14 in. Wide (16 in. for Extra Wide) x 18 in. Front to Back Attributes: GTIN: 00603784103983 Brand Name: PRP Color Code: 64 High Back Dimensions: 31 in. Tall (33 in. for 2-inch Extra Tall; 35 in. for 4-inch Extra Tall) x 21 in. Wide (23 in. for Extra Wide) x 26 in. Deep Low Back Dimensions: 24 in. Tall (29 in. with Adjustable Headrest) x 21 in. Wide (23 in. for Extra Wide) x 26 in. Deep Mounting Area: 14 in. Wide (16 in. for Extra Wide) x 18 in. Front to Back Variant: Color: Tan/Black Warranty: 1 year Extended Information: Country of Origin: United States Emissions : Emissions Compliance Exempt Life Cycle Status: Available To Order Packing Information: Quantity of Each: 1 Package UOM: EA Dimension: 22.0 x 24.0 x 38.0 inches Weight: 20.0 lb

With 7 inches of containment, the Premier is PRPs versatile, all-around, off-road suspension seat. A great classic seat for Jeeps, buggies, trail rigs, and prerunners. Medium level containment on the sides keeps you secure when the ride gets rough, but still makes it easy to get in and out of the vehicle. The vinyl-coated nylon suspension liner and dual-density foam decrease the impact on the body, reducing the fatigue you feel after a long day in the dirt or dunes. Like all of PRPs Classic Series seats, the Premier can be built up to 4 inches taller and 2 inches wider (be sure to measure your vehicle to see if you have enough room). As an alternative to the height options, you can change the classic hoop to an adjustable headrest, or eliminate the headrest altogether for that vintage low back look. PRPs Original Suspension Seat Classic Style Mid-Sized Containment for a Wide Range of Uses High Back Dimensions: 31 in. Tall (33 in. for 2-inch Extra Tall; 35 in. for 4-inch Extra Tall) x 21 in. Wide (23 in. for Extra Wide) x 26 in. Deep Low Back Dimensions: 24 in. Tall (29 in. with Adjustable Headrest) x 21 in. Wide (23 in. for Extra Wide) x 26 in. Deep Mounting Area: 14 in. Wide (16 in. for Extra Wide) x 18 in. Front to Back Design your own and Make it Yours! With over 60+ different colors and materials to choose from, you can customize the perfect seat for your ride Extra options available include Front Goggle Pockets, Rear Storage Pockets, Water Paks, Heated Seats, Air Lumbar, and various Diamond Stitches Attributes: GTIN: Brand Name: PRP Add-On: Add-Ons;O30;Seat Double Stitch Color Code: 00 High Back Dimensions: 31 in. Tall (33 in. for 2-inch Extra Tall; 35 in. for 4-inch Extra Tall) x 21 in. Wide (23 in. for Extra Wide) x 26 in. Deep Low Back Dimensions: 24 in. Tall (29 in. with Adjustable Headrest) x 21 in. Wide (23 in. for Extra Wide) x 26 in. Deep Mounting Area: 14 in. Wide (16 in. for Extra Wide) x 18 in. Front to Back Variant: Width: 2 inch Extra Wide; Height: Standard Height; Depth: Standard Depth Warranty: 1 year Extended Information: Country of Origin: United States Emissions : Emissions Compliance Exempt Life Cycle Status: Available To Order Packing Information: Quantity of Each: 1 Package UOM: EA Dimension: 22.0 x 24.0 x 38.0 inches Weight: 20.0 lb

Designed for smaller riders and spaces, the Premier Lite fits into areas our full size Premier cant. Scaled down 2 inches in all directions from the standard Premier, the Lite is perfect for a third rear seat in your prerunner, or stick a pair in the back of a buggy or sand rail. Designed for Smaller Riders up to 5 feet Tall and up to a 26 inch Waist Slotted for 5 Point Harness Dimensions: 28 in. Tall x 19 in. Wide x 23 in. Deep Mounting Area: 12 in. Wide x 16 in. Front to Back Design your own and Make it Yours! With over 60+ different colors and materials to choose from, you can customize the perfect seat for your ride Extra options available include Front Goggle Pockets, Rear Storage Pockets, Water Paks, Heated Seats, Air Lumbar, and various Diamond Stitches Attributes: GTIN: Brand Name: PRP Add-On: Add-Ons;O30;Seat Double Stitch Color Code: 00 Dimensions: 28 in. Tall x 19 in. Wide x 23 in. Deep Mounting Area: 12 in. Wide x 16 in. Front to Back Warranty: 1 year Extended Information: Country of Origin: United States Emissions : Emissions Compliance Exempt Life Cycle Status: Available To Order Packing Information: Quantity of Each: 1 Package UOM: EA Dimension: 22.0 x 24.0 x 38.0 inches Weight: 20.0 lb

With 7 inches of containment, the Premier is PRPs versatile, all-around, off-road suspension seat. A great classic seat for Jeeps, buggies, trail rigs, and prerunners. Medium level containment on the sides keeps you secure when the ride gets rough, but still makes it easy to get in and out of the vehicle. The vinyl-coated nylon suspension liner and dual-density foam decrease the impact on the body, reducing the fatigue you feel after a long day in the dirt or dunes. Like all of PRPs Classic Series seats, the Premier can be built up to 4 inches taller and 2 inches wider (be sure to measure your vehicle to see if you have enough room). As an alternative to the height options, you can change the classic hoop to an adjustable headrest, or eliminate the headrest altogether for that vintage low back look. PRPs Original Suspension Seat Classic Style Mid-Sized Containment for a Wide Range of Uses High Back Dimensions: 31 in. Tall (33 in. for 2-inch Extra Tall; 35 in. for 4-inch Extra Tall) x 21 in. Wide (23 in. for Extra Wide) x 26 in. Deep Low Back Dimensions: 24 in. Tall (29 in. with Adjustable Headrest) x 21 in. Wide (23 in. for Extra Wide) x 26 in. Deep Mounting Area: 14 in. Wide (16 in. for Extra Wide) x 18 in. Front to Back Design your own and Make it Yours! With over 60+ different colors and materials to choose from, you can customize the perfect seat for your ride Extra options available include Front Goggle Pockets, Rear Storage Pockets, Water Paks, Heated Seats, Air Lumbar, and various Diamond Stitches Attributes: GTIN: Brand Name: PRP Add-On: Add-Ons;O30;Seat Double Stitch Color Code: 00 High Back Dimensions: 31 in. Tall (33 in. for 2-inch Extra Tall; 35 in. for 4-inch Extra Tall) x 21 in. Wide (23 in. for Extra Wide) x 26 in. Deep Low Back Dimensions: 24 in. Tall (29 in. with Adjustable Headrest) x 21 in. Wide (23 in. for Extra Wide) x 26 in. Deep Mounting Area: 14 in. Wide (16 in. for Extra Wide) x 18 in. Front to Back Variant: Width: Standard Width; Height: Standard Height; Depth: Standard Depth Warranty: 1 year Extended Information: Country of Origin: United States Emissions : Emissions Compliance Exempt Life Cycle Status: Available To Order Packing Information: Quantity of Each: 1 Package UOM: EA Dimension: 22.0 x 24.0 x 38.0 inches Weight: 20.0 lb

With 7 inches of containment, the Premier is PRPs versatile, all-around, off-road suspension seat. A great classic seat for Jeeps, buggies, trail rigs, and prerunners. Medium level containment on the sides keeps you secure when the ride gets rough, but still makes it easy to get in and out of the vehicle. The vinyl-coated nylon suspension liner and dual-density foam decrease the impact on the body, reducing the fatigue you feel after a long day in the dirt or dunes. Like all of PRPs Classic Series seats, the Premier can be built up to 4 inches taller and 2 inches wider (be sure to measure your vehicle to see if you have enough room). As an alternative to the height options, you can change the classic hoop to an adjustable headrest, or eliminate the headrest altogether for that vintage low back look. PRPs Original Suspension Seat Classic Style Mid-Sized Containment for a Wide Range of Uses High Back Dimensions: 31 in. Tall (33 in. for 2-inch Extra Tall; 35 in. for 4-inch Extra Tall) x 21 in. Wide (23 in. for Extra Wide) x 26 in. Deep Low Back Dimensions: 24 in. Tall (29 in. with Adjustable Headrest) x 21 in. Wide (23 in. for Extra Wide) x 26 in. Deep Mounting Area: 14 in. Wide (16 in. for Extra Wide) x 18 in. Front to Back Design your own and Make it Yours! With over 60+ different colors and materials to choose from, you can customize the perfect seat for your ride Extra options available include Front Goggle Pockets, Rear Storage Pockets, Water Paks, Heated Seats, Air Lumbar, and various Diamond Stitches Attributes: GTIN: Brand Name: PRP Add-On: Add-Ons;O30;Seat Double Stitch Color Code: 00 High Back Dimensions: 31 in. Tall (33 in. for 2-inch Extra Tall; 35 in. for 4-inch Extra Tall) x 21 in. Wide (23 in. for Extra Wide) x 26 in. Deep Low Back Dimensions: 24 in. Tall (29 in. with Adjustable Headrest) x 21 in. Wide (23 in. for Extra Wide) x 26 in. Deep Mounting Area: 14 in. Wide (16 in. for Extra Wide) x 18 in. Front to Back Variant: Width: 2 inch Extra Wide; Height: Standard Height; Depth: Standard Depth Warranty: 1 year Extended Information: Country of Origin: United States Emissions : Emissions Compliance Exempt Life Cycle Status: Available To Order Packing Information: Quantity of Each: 1 Package UOM: EA Dimension: 22.0 x 24.0 x 38.0 inches Weight: 20.0 lb

With 7 inches of containment, the Premier is PRPs versatile, all-around, off-road suspension seat. A great classic seat for Jeeps, buggies, trail rigs, and prerunners. Medium level containment on the sides keeps you secure when the ride gets rough, but still makes it easy to get in and out of the vehicle. The vinyl-coated nylon suspension liner and dual-density foam decrease the impact on the body, reducing the fatigue you feel after a long day in the dirt or dunes. Like all of PRPs Classic Series seats, the Premier can be built up to 4 inches taller and 2 inches wider (be sure to measure your vehicle to see if you have enough room). As an alternative to the height options, you can change the classic hoop to an adjustable headrest, or eliminate the headrest altogether for that vintage low back look. PRPs Original Suspension Seat Classic Style Mid-Sized Containment for a Wide Range of Uses High Back Dimensions: 31 in. Tall (33 in. for 2-inch Extra Tall; 35 in. for 4-inch Extra Tall) x 21 in. Wide (23 in. for Extra Wide) x 26 in. Deep Low Back Dimensions: 24 in. Tall (29 in. with Adjustable Headrest) x 21 in. Wide (23 in. for Extra Wide) x 26 in. Deep Mounting Area: 14 in. Wide (16 in. for Extra Wide) x 18 in. Front to Back Design your own and Make it Yours! With over 60+ different colors and materials to choose from, you can customize the perfect seat for your ride Extra options available include Front Goggle Pockets, Rear Storage Pockets, Water Paks, Heated Seats, Air Lumbar, and various Diamond Stitches Attributes: GTIN: Brand Name: PRP Add-On: Add-Ons;O30B;Bench Double Stitch Color Code: 00 High Back Dimensions: 31 in. Tall (33 in. for 2-inch Extra Tall; 35 in. for 4-inch Extra Tall) x 21 in. Wide (23 in. for Extra Wide) x 26 in. Deep Low Back Dimensions: 24 in. Tall (29 in. with Adjustable Headrest) x 21 in. Wide (23 in. for Extra Wide) x 26 in. Deep Mounting Area: 14 in. Wide (16 in. for Extra Wide) x 18 in. Front to Back Variant: Width: Standard Width; Height: Standard Height; Depth: 3 inch Short (Rear) Warranty: 1 year Extended Information: Country of Origin: United States Life Cycle Status: Available To Order Emissions : Emissions Compliance Exempt Packing Information: Quantity of Each: 1 Package UOM: EA Dimension: 22.0 x 24.0 x 38.0 inches Weight: 20.0 lb

Stand For Mounting Display Seats. Attributes: GTIN: 00603784098098 Brand Name: PRP Color Code: 00 Warranty: 1 year Extended Information: Country of Origin: United States Emissions : Emissions Compliance Exempt Life Cycle Status: Available To Order Packing Information: Quantity of Each: 1 Package UOM: EA Dimension: 18.0 x 16.0 x 4.0 inches Weight: 8.0 lb

Looking for an easy way to mount a push-to-talk or horn button on your steering wheel This PTT steering wheel plate allows you to mount a dual button on your steering wheel that is easy to reach and doesnt require you to modify the steering wheel or hub. The plate is easy to install. All it requires is for you slip this plate behind your aftermarket steering wheel and sandwich it between the wheel and the hub when you bolt the steering wheel to the hub. This plate features two bolt patterns: the standard 6-bolt pattern used by brands like MOMO, and the 5-bolt pattern used by GRANT. It will not work on the stock OEM steering wheel. The plate is available in a powder coat matte black finish or as raw for your own custom color or finish. Dual Steering Wheel Bolt Pattern: MOMO 6-Bolt and GRANT 5-Bolt Easy to Install; Requires No Modifications Mounts a Double PTT Radio Button and/or Horn Button Available in Either Matte Black Powdercoat or as Raw For Your Own Custom Color or Finish Attributes: GTIN: 00603784097060 Brand Name: PRP Color Code: 1 Dual Steering Wheel Bolt Pattern: MOMO 6-Bolt and GRANT 5-Bolt Variant: Color: Black Warranty: 1 year Extended Information: Country of Origin: United States Emissions : Emissions Compliance Exempt Life Cycle Status: Available To Order Packing Information: Quantity of Each: 1 Package UOM: EA Dimension: 12.0 x 7.0 x 1.0 inches Weight: 1.0 lb

Looking for an easy way to mount a push-to-talk or horn button on your steering wheel This PTT steering wheel plate allows you to mount a single button on your steering wheel that is easy to reach and doesnt require you to modify the steering wheel or hub. The plate is easy to install. All it requires is for you slip this plate behind your aftermarket steering wheel and sandwich it between the wheel and the hub when you bolt the steering wheel to the hub. This plate features two bolt patterns: the standard 6-bolt pattern used by brands like MOMO, and the 5-bolt pattern used by GRANT. It will not work on the stock OEM steering wheel. The plate is available in a powder coat matte black finish or as raw for your own custom color or finish. The button tab can be mount so that you have the choice to have it be located on either the left or right-hand side. Dual Steering Wheel Bolt Pattern: MOMO 6-Bolt and GRANT 5-Bolt Easy to Install; Requires No Modifications Mounts a Single PTT Radio Button or Horn Button Available in Either Matte Black Powdercoat or as Raw For Your Own Custom Color or Finish Button Tab Can Be Mounted on Either Side Attributes: GTIN: 00603784097084 Brand Name: PRP Variant: Color: Black Warranty: 1 year Color Code: 1 Dual Steering Wheel Bolt Pattern: MOMO 6-Bolt and GRANT 5-Bolt Extended Information: Country of Origin: United States Emissions : Emissions Compliance Exempt Life Cycle Status: Available To Order Packing Information: Quantity of Each: 1 Package UOM: EA Dimension: 12.0 x 7.0 x 1.0 inches Weight: 1.0 lb

Looking for an easy way to mount a push-to-talk or horn button on your steering wheel This PTT steering wheel plate allows you to mount a dual button on your steering wheel that is easy to reach and doesnt require you to modify the steering wheel or hub. The plate is easy to install. All it requires is for you slip this plate behind your aftermarket steering wheel and sandwich it between the wheel and the hub when you bolt the steering wheel to the hub. This plate features two bolt patterns: the standard 6-bolt pattern used by brands like MOMO, and the 5-bolt pattern used by GRANT. It will not work on the stock OEM steering wheel. The plate is available in a powder coat matte black finish or as raw for your own custom color or finish. Dual Steering Wheel Bolt Pattern: MOMO 6-Bolt and GRANT 5-Bolt Easy to Install; Requires No Modifications Mounts a Double PTT Radio Button and/or Horn Button Available in Either Matte Black Powdercoat or as Raw For Your Own Custom Color or Finish Attributes: GTIN: 00603784097077 Brand Name: PRP Warranty: 1 year Color Code: 0 Dual Steering Wheel Bolt Pattern: MOMO 6-Bolt and GRANT 5-Bolt Variant: Color: Raw Extended Information: Country of Origin: United States Emissions : Emissions Compliance Exempt Life Cycle Status: Available To Order Packing Information: Quantity of Each: 1 Package UOM: EA Dimension: 12.0 x 7.0 x 1.0 inches Weight: 1.0 lb

Looking for an easy way to mount a push-to-talk or horn button on your steering wheel This PTT steering wheel plate allows you to mount a single button on your steering wheel that is easy to reach and doesnt require you to modify the steering wheel or hub. The plate is easy to install. All it requires is for you slip this plate behind your aftermarket steering wheel and sandwich it between the wheel and the hub when you bolt the steering wheel to the hub. This plate features two bolt patterns: the standard 6-bolt pattern used by brands like MOMO, and the 5-bolt pattern used by GRANT. It will not work on the stock OEM steering wheel. The plate is available in a powder coat matte black finish or as raw for your own custom color or finish. The button tab can be mount so that you have the choice to have it be located on either the left or right-hand side. Dual Steering Wheel Bolt Pattern: MOMO 6-Bolt and GRANT 5-Bolt Easy to Install; Requires No Modifications Mounts a Single PTT Radio Button or Horn Button Available in Either Matte Black Powdercoat or as Raw For Your Own Custom Color or Finish Button Tab Can Be Mounted on Either Side Attributes: GTIN: 00603784097091 Brand Name: PRP Color Code: 0 Dual Steering Wheel Bolt Pattern: MOMO 6-Bolt and GRANT 5-Bolt Variant: Color: Raw Warranty: 1 year Extended Information: Country of Origin: United States Emissions : Emissions Compliance Exempt Life Cycle Status: Available To Order Packing Information: Quantity of Each: 1 Package UOM: EA Dimension: 12.0 x 7.0 x 1.0 inches Weight: 1.0 lb

PRPs Roadster Suspension Seat is the perfect option for vehicles with limited space. It will fit great in your VW buggy, sand rail, Suzuki Samurai, or Manx style buggy. The Roadster is only 19 inches wide, but has low sides, which makes the seat easier to slide in and out of while still providing a comfortable, true suspension seat that will fit where your old fiberglass or poly seats once were. If you need a mount, check out our specially designed Roadster Mount designed to fit this narrow seat into any vehicle with a flat pan floor. Comes standard with one seat belt slot and one submarine slot. The Only 19 inch Wide Suspension Seat on the Market Great for a VW Buggy, Manx Style Buggy, or Suzuki Samurai High Back Dimensions: 31 in. Tall (33 in. for 2-inch Extra Tall; 35 in. for 4-inch Extra Tall) x 19 in. Wide x 26 in. Deep (23 in. For Rear Seats) Low Back Dimensions: 24 in. Tall (29 in. with Adjustable Headrest) x 19 in. Wide x 26 in. Deep (23 in. For Rear Seats) Mounting Area: 12 in. Wide x 18 in. (15 in. for Rear Seats) Front to Back Design your own and Make it Yours! With over 60+ different colors and materials to choose from, you can customize the perfect seat for your ride Extra options available include Front Goggle Pockets, Rear Storage Pockets, Water Paks, Heated Seats, Air Lumbar, and various Diamond Stitches Attributes: GTIN: Brand Name: PRP Low Back Dimensions: 24 in. Tall (29 in. with Adjustable Headrest) x 19 in. Wide x 26 in. Deep (23 in. For Rear Seats) Mounting Area: 12 in. Wide x 18 in. (15 in. for Rear Seats) Front to Back Variant: Width: Standard Width; Height: 2 inch Extra Tall; Depth: Standard Depth Warranty: 1 year Add-On: Add-Ons;O30;Seat Double Stitch Color Code: 00 High Back Dimensions: 31 in. Tall (33 in. for 2-inch Extra Tall; 35 in. for 4-inch Extra Tall) x 19 in. Wide x 26 in. Deep (23 in. For Rear Seats) Extended Information: Country of Origin: United States Emissions : Emissions Compliance Exempt Life Cycle Status: Available To Order Packing Information: Quantity of Each: 1 Package UOM: EA Dimension: 22.0 x 24.0 x 38.0 inches Weight: 20.0 lb

PRPs Roadster Suspension Seat is the perfect option for vehicles with limited space. It will fit great in your VW buggy, sand rail, Suzuki Samurai, or Manx style buggy. The Roadster is only 19 inches wide, but has low sides, which makes the seat easier to slide in and out of while still providing a comfortable, true suspension seat that will fit where your old fiberglass or poly seats once were. If you need a mount, check out our specially designed Roadster Mount designed to fit this narrow seat into any vehicle with a flat pan floor. Comes standard with one seat belt slot and one submarine slot. The Only 19 inch Wide Suspension Seat on the Market Great for a VW Buggy, Manx Style Buggy, or Suzuki Samurai High Back Dimensions: 31 in. Tall (33 in. for 2-inch Extra Tall; 35 in. for 4-inch Extra Tall) x 19 in. Wide x 26 in. Deep (23 in. For Rear Seats) Low Back Dimensions: 24 in. Tall (29 in. with Adjustable Headrest) x 19 in. Wide x 26 in. Deep (23 in. For Rear Seats) Mounting Area: 12 in. Wide x 18 in. (15 in. for Rear Seats) Front to Back Design your own and Make it Yours! With over 60+ different colors and materials to choose from, you can customize the perfect seat for your ride Extra options available include Front Goggle Pockets, Rear Storage Pockets, Water Paks, Heated Seats, Air Lumbar, and various Diamond Stitches Attributes: GTIN: Brand Name: PRP Add-On: Add-Ons;O30;Seat Double Stitch Color Code: 00 High Back Dimensions: 31 in. Tall (33 in. for 2-inch Extra Tall; 35 in. for 4-inch Extra Tall) x 19 in. Wide x 26 in. Deep (23 in. For Rear Seats) Low Back Dimensions: 24 in. Tall (29 in. with Adjustable Headrest) x 19 in. Wide x 26 in. Deep (23 in. For Rear Seats) Mounting Area: 12 in. Wide x 18 in. (15 in. for Rear Seats) Front to Back Variant: Width: Standard Width; Height: 4 inch Extra Tall; Depth: Standard Depth Warranty: 1 year Extended Information: Country of Origin: United States Emissions : Emissions Compliance Exempt Life Cycle Status: Available To Order Packing Information: Quantity of Each: 1 Package UOM: EA Dimension: 22.0 x 24.0 x 38.0 inches Weight: 20.0 lb

PRPs Roadster Suspension Seat is the perfect option for vehicles with limited space. It will fit great in your VW buggy, sand rail, Suzuki Samurai, or Manx style buggy. The Roadster is only 19 inches wide, but has low sides, which makes the seat easier to slide in and out of while still providing a comfortable, true suspension seat that will fit where your old fiberglass or poly seats once were. If you need a mount, check out our specially designed Roadster Mount designed to fit this narrow seat into any vehicle with a flat pan floor. Comes standard with one seat belt slot and one submarine slot. The Only 19 inch Wide Suspension Seat on the Market Great for a VW Buggy, Manx Style Buggy, or Suzuki Samurai High Back Dimensions: 31 in. Tall (33 in. for 2-inch Extra Tall; 35 in. for 4-inch Extra Tall) x 19 in. Wide x 26 in. Deep (23 in. For Rear Seats) Low Back Dimensions: 24 in. Tall (29 in. with Adjustable Headrest) x 19 in. Wide x 26 in. Deep (23 in. For Rear Seats) Mounting Area: 12 in. Wide x 18 in. (15 in. for Rear Seats) Front to Back Design your own and Make it Yours! With over 60+ different colors and materials to choose from, you can customize the perfect seat for your ride Extra options available include Front Goggle Pockets, Rear Storage Pockets, Water Paks, Heated Seats, Air Lumbar, and various Diamond Stitches Attributes: GTIN: Brand Name: PRP Add-On: Add-Ons;O30B;Bench Double Stitch Color Code: 00 High Back Dimensions: 31 in. Tall (33 in. for 2-inch Extra Tall; 35 in. for 4-inch Extra Tall) x 19 in. Wide x 26 in. Deep (23 in. For Rear Seats) Low Back Dimensions: 24 in. Tall (29 in. with Adjustable Headrest) x 19 in. Wide x 26 in. Deep (23 in. For Rear Seats) Mounting Area: 12 in. Wide x 18 in. (15 in. for Rear Seats) Front to Back Variant: Width: Standard Width; Height: Standard Height; Depth: 3 inch Short (Rear) Warranty: 1 year Extended Information: Country of Origin: United States Emissions : Emissions Compliance Exempt Life Cycle Status: Available To Order Packing Information: Quantity of Each: 1 Package UOM: EA Dimension: 22.0 x 24.0 x 38.0 inches Weight: 20.0 lb