Close ×
Choose your Vehicle
Select your vehicle for a custom shopping experience
JKS Manufacturing 1-1/2in Jam Nut Wrench
$13.95
Equip your tool box with the JKS 1-1/2" Jam Nut Wrench designed to fit your Jeep suspension for easy on the fly adjustments. Jam nuts are hard to adjust when they are installed on the Jeep and this tool allows you to use your ratchet and properly tighten the jam nut to the proper torque specs. This is a must have in any Jeepers tool box.
JKS Manufacturing 1-7/8in Jam Nut Wrench
$13.95
Properly torque down your jam nuts with the JKS 1-7/8" jam nut wrench without having to remove the control arms from your Jeep. This compact wrench allows you to get into tight places with the control arms installed on the Jeep and easily tighten or loosen the jam nuts. This is a must have tool in your Jeep.
JKS Manufacturing Step Drill Bit - 3/16in To 7/8in
$18.95
If you are serious about off-roading, then you need a JKS step drill bit for drilling and enlarging holes to accept heavy-duty hardware. The 1699 Step Drill Bit will drill holes from 3/16" to 7/8" in 1/16" increments. Thanks to the self-piloting design, you only need a center punch to locate your hole. Made from hardened high-speed steel with a titanium nitride coating and a heavy-duty 3/8" shank. The dual-flute design provide fast, smooth cutting. Works well as a deburring tool too. One unique application where we have found ourselves using these bits is to drill out JK knuckle steering arms to accept JSPEC drag link flip.
JKS Manufacturing Track Bars / J-Flex Control Arms Flex Joint Rebuild Tool Kit
$22.95
This new tool makes rebuilding the JKS flex joints on track bars or upper and lower J-Flex arms a breeze. The kits comes with simple tools that work with both small and large joints. No need for finding random sockets or fumbling with a bench vise to compress the joints. This tool will even work with control arms still partially installed in the vehicle.Installation Instructions
LIQUI MOLY Ball Drain Faucet 3/4in
$18.13
$30.48
Metal ball valve for use with drums outfitted with NPT threads. Angled spout allows quick, easy, no-spill fluid transfer.
LIQUI MOLY Drain Spout w/O-Ring - DIN 61
$5.82
$7.68
Use with 20 liter containers to dispense fluid into smaller container. Ideally used when 20 liter container is used with Liqui Moly oil cabinet.Product Specifications Sheet
LIQUI MOLY Hand Pump
$16.65
$29.20
If necessary, cut hose A to the right length at the straight end. The notched end should touch the bottom of the container (1). Take the short straight hose and insert the end you have just cut into the pump from below (2). Connect hose B to the hand pump and secure with the clip (3). Insert the yellow end piece (inch thread) into the hose (4). The end piece can be adjusted to metric threads using the adapter (5). Screw the pump onto the container and open the pump lever.Hold the roughly corrugated part (6) and turn the pump lever counterclockwise until it flips up (7).The pump is now ready to use.Installation Instructions
Lund 05 Toyota Tacoma Ext./Crew Cab Auxiliary Mounting Kit - Brite
$23.48
$48.24
Truck Tool Box Accessories LUND offers accessories and replacement parts as well as mounting kit for your storage box. Everything you need to install and organize your truck tool boxes. In addition, replace worn or broken latches and lid shocks.Installation InstructionsThis Part Fits:
Year
Make
Model
Submodel
2005
Toyota
Tacoma
Base
2005
Toyota
Tacoma
Pre Runner
2005
Toyota
Tacoma
X-Runner
Lund Universal (Storage Box Mounting Kit) Tool Box Mounting Kit - Brite
$16.64
$34.20
Truck Tool Box Accessories LUND offers accessories and replacement parts as well as mounting kit for your storage box. Everything you need to install and organize your truck tool boxes. In addition, replace worn or broken latches and lid shocks.
MaxTrac 15-20 GM C/K1500 2WD/4WD Magneride Wire Tool
$21.81
$25.26
MaxTrac 15-20 GM C/K1500 2WD/4WD Magneride Wire ToolThis Part Fits:
Year
Make
Model
Submodel
2016-2019
Chevrolet
Silverado 1500
Custom
2014-2019
Chevrolet
Silverado 1500
High Country
2015-2018
Chevrolet
Silverado 1500
LS
2014-2019
Chevrolet
Silverado 1500
LT
2014-2019
Chevrolet
Silverado 1500
LTZ
2015-2019
Chevrolet
Silverado 1500
SSV
2014-2019
Chevrolet
Silverado 1500
WT
2019
Chevrolet
Silverado 1500 LD
Custom
2019
Chevrolet
Silverado 1500 LD
LT
2019
Chevrolet
Silverado 1500 LD
WT
2014-2019
GMC
Sierra 1500
Base
2014-2019
GMC
Sierra 1500
Denali
2014-2019
GMC
Sierra 1500
SLE
2014-2019
GMC
Sierra 1500
SLT
2019
GMC
Sierra 1500 Limited
Base
2019
GMC
Sierra 1500 Limited
SLE
Mishimoto 11pc Trim Removal Tool
$16.09
$18.00
Stop scratching up your trim while using the wrong tools for trim removal. An effective trim-specific tool kit will save you time and prevent damage to your exterior/interior trim panels during removal. Mishimoto’s trim removal tool set includes 11 unique tools to remove any piece of interior/exterior trim on your vehicle. Our tools are constructed from durable impact-resistant nylon, which resists bending and prevents marring of the trim surface. In addition, our kit is encased in a cloth pouch for organization and easy transportation. As with all our products, this kit includes our signature Mishimoto Lifetime Warranty.
Mishimoto 9pc Scraper, Hook and Pick Tool Kit
$19.12
$21.00
Often overlooked, a pick, hook, and scraper set is convenient, serves a variety of functions, and should have a space in everyone’s toolbox. Mishimoto’s Pick and Hook Set includes six different hooks, two straight picks, and one gasket scraper. We’ve found a ton of uses for this kit over the years, including removing gaskets, springs, O-rings, seals, wiring clips, stuck hoses, and various other hard-to-access components. Our kit is constructed using drop-forged, heat-treated steel shafts, which provide optimal strength and bend resistance. Our ergonomic handles are comfortable and provide ample grip, ensuring they aren’t dropped into the depths of a dark, mysterious engine bay. Our kit includes both long and short pick/hook sets for use on various components in varying situations and spaces. As with all our products, this kit includes our signature Mishimoto Lifetime Warranty.
Mishimoto Fan Clutch Wrench Set for BMW 2pc
$18.11
$20.00
Save yourself time and frustration when removing your BMW clutch fan with this Mishimoto fan clutch removal tool set. This 32mm long-reach wrench and water pump pulley holding tool make replacing your BMW water pump or fan clutch a fast and easy job. Simply fasten the holding tool to the water pump with the stock pulley bolts and use the 32mm wrench to loosen the fan nut -easy. This tool set works with most BMW 4, 6, and 8-cylinder engines and is made from durable steel for a long service life. Like all Mishimoto tools, this BMW fan clutch removal tool set is backed by our Mishimoto Lifetime Warranty.
Mishimoto Fin Straightener Tool
$10.04
$11.00
The fins on your Mishimoto performance radiator, oil cooler, transmission cooler, or intercooler were meticulously engineered to provide the most efficient cooling possible. But, over time, bent fins can rob your cooler of airflow, efficiency, and good looks.Restore your cooler's performance and aesthetics with this 6-in-1 fin straightener tool. This tool allows you to quickly and easily realign bent fins and return your cooler to its former glory. The Mishimoto 6-in-1 fin straightener tool features combs for most common fin spacings, including 8, 9, 10, 12, 14, and 15 fins-per-inch. Like all Mishimoto tools, this fin straightener tool is backed by our Mishimoto Lifetime Warranty for a lifetime of service.
Mishimoto Hose Remover Pliers
$14.08
$15.00
Removing coolant and vacuum hoses can be tricky after years of heat and clamping pressure. Picks or screwdrivers can stretch or tear the hose, causing leaks. Instead of struggling with the wrong tool, make the job easy with these Mishimoto Hose Removal Pliers. These pliers apply even pressure around the hose to push it off the barb without damage. The durable steel jaws are strong enough to remove hoses 5/32in to 1/2in while the rubberized grips provide a comfortable and secure grip. Like all Mishimoto tools, these Mishimoto Hose Removal Pliers are backed by our Mishimoto Lifetime Warranty.
Mishimoto Oil Filter Wrench Claw Type
$14.08
$15.00
Stubborn and hard-to-reach oil filters are no match for this Mishimoto claw-style oil filter wrench. This oil filter wrench attaches to any 3/8in ratchet or breaker bar to make removing oil filters easy, even in tight spaces. The self-adjusting legs are made from heavy-duty steel and feature rubberized pads to grip oil filters from 2-1/2in to 3-7/8in. That versatility means you only need to keep one wrench in your toolbox for all of your vehicles. Like all of our tools, this claw-style oil filter wrench is backed by our Mishimoto Lifetime Warranty for a lifetime of service.
Mishimoto Wrench -10AN (Black Anodized)
$22.14
$24.00
Put the adjustable wrench down and back away from the -AN fitting! Having the proper tools can make all the difference in completing a job in a tidy and efficient manner. Mishimoto -AN wrenches are specifically designed for the assembly of these unique lines and fittings. Along with making the process easier, these 6061 aluminum wrenches prevent damage and scratches to your new -AN fittings. Our -AN wrenches feature a custom-designed handle for comfortable use and a durable anodized finish to prevent corrosion and provide years of service for all your -AN projects. As with all Mishimoto products, these -AN fitting wrenches include our signature Lifetime Warranty.
Mishimoto Wrench -6AN (Black Anodized)
$16.09
$18.00
Put the adjustable wrench down and back away from the -AN fitting! Having the proper tools can make all the difference in completing a job in a tidy and efficient manner. Mishimoto -AN wrenches are specifically designed for the assembly of these unique lines and fittings. Along with making the process easier, these 6061 aluminum wrenches prevent damage and scratches to your new -AN fittings. Our -AN wrenches feature a custom-designed handle for comfortable use and a durable anodized finish to prevent corrosion and provide years of service for all your -AN projects. As with all Mishimoto products, these -AN fitting wrenches include our signature Lifetime Warranty.
Moroso Engine Storage Bag w/Logo - 47in Tall x 40in Wide x 19-1/2in Deep - Single
$18.99
Moroso Engine Storage Bag w/Logo - 47in Tall x 40in Wide x 19-1/2in Deep - Single
Moroso Engine Store Bag - XL - 54in Tall x 42in Wide x 32in Deep - Single
$22.99
Moroso Engine Store Bag - XL - 54in Tall x 42in Wide x 32in Deep - Single
Moroso Quick Fastener Wrench - Zinc Plated Steel
$16.99
Moroso Quick Fastener Wrench - Zinc Plated Steel
Nitrous Express Solenoid Maintenance Wrench
$10.70
Wow, how do I start to tell the world why NX is different and better than any other company? Lets start with the NX philosophy: All components must be of the highest quality, no off shore junk; 99% of NX products are produced and assembled in the USA; All NX components and systems must be tested and proven before they are shipped to any customers; All horsepower claims must be accurate and dyno proven at the wheel! NX copies no one; we lead the industry in technology and innovation; Never be satisfied with the status quo; Always give the customer more than he expects!WarrantyCertificate of Origin
Nitrous Express Super Shark Solenoid Maintenance Wrench
$15.59
Nitrous Express Super Shark Solenoid Maintenance WrenchCertificate of OriginWarranty
