The All-New HPS Performance 827 Series Air Intake Kit (Red, Part # 827-169R) for 2005-2019 Toyota Tacoma 2.7L offers a free-flowing 2-3/4 inch mandrel-bent aluminum tube induction system designed to produce dyno proven performance gains - increase horsepower +5.7 whp , torque +7.4 ft/lbs and improve throttle response while maintaining safe air fuel ratio. The heavy duty powder coated steel heat shield blocks hot air from the air filter for the best cooling effect. The included installation manual has clear pictures and instructions to guide the installer throughout the whole process. The kit does NOT require tuning and does not trigger CEL light. No modification is required during the installation. HPS light weight mandrel-bent aluminum alloy tube replaces the stock restrictive air box and optimize the air flow with excellent heat dissipation and long lasting durability. HPS Performance 827 Series air intake kit features race proven reinforced silicone hoses and industrial grade 100% stainless steel T-bolt clamps which ensures reliability, even during the most extreme driving conditions. The All-New HPS Performance Air Filter is designed with performance in mind, delivering excellent filtration without sacrificing air flow. All HPS Performance Air Filter are made in the United States. Fine-tuned by HPS Performance to produce dyno proven performance gains - increase horsepower +5.7 whp , torque +7.4 ft/lbs and improve throttle response. Does NOT require tuning after the install. Light weight 2-3/4 inch mandrel-bent aluminum alloy piping replaces the stock restrictive air box and optimize the air flow with excellent heat dissipation and long lasting durability. Features HPS Performance race proven reinforced silicone hoses, industrial grade 100% stainless steel T-bolt clamps and Washable/Reusable Performance Air Filter. Heavy duty powder coated steel heat shield blocks hot air from the air filter for the best cooling effect. The included installation manual has clear pictures and instructions to guide the installer throughout the whole process. Bolt-on easy installation, no modification. Attributes: GTIN: 00648044888088 Brand Name: HPS Performance Add-On HPS Filter: HPS-4276 Extended Information: Country of Origin: China Emissions : Electronically Announced Life Cycle Status: Available To Order Packing Information: Quantity of Each: 1 Package UOM: EA Dimension: 24 x 12 x 10 inches Weight: 7 lb

Thule was established in Sweden in 1942 and ever since then, we've made it out business to bring you closer to the world and your passion for life. We are an international group if people united by our own passion for helping active families and outdoor enthusiasts. Thule helps you transport anything you care for safely, easily and in style so you are free to live your active life. We believe in the values of an active life - whether you're in the city or the great outdoors. For our own health and happiness as human beings, and ultimately for the respect and care we then give to the world around us. Whatever your passion, whatever your pursuit. Wherever you're going, whatever you're bringing, with Thule, you're free to live your active life to the full.This Part Fits: Year Make Model Submodel 2005-2015 Toyota Tacoma Base 2005-2015 Toyota Tacoma Pre Runner 2015 Toyota Tacoma TRD Pro 2005-2013 Toyota Tacoma X-Runner

ARB Brkt Tension Tacoma

Rust Buster 1995-2004 Toyota Tacoma Mid-Frame Stiffeners

Mounts Behind Utility Track Allowing Full Use With Most Accessories and Tonneau CoversThis Part Fits: Year Make Model Submodel 2005-2015 Toyota Tacoma Base 2016-2021 Toyota Tacoma Limited 2005-2015 Toyota Tacoma Pre Runner 2016-2021 Toyota Tacoma SR 2016-2021 Toyota Tacoma SR5 2021 Toyota Tacoma Trail 2016-2021 Toyota Tacoma TRD Off-Road 2015,2017-2021 Toyota Tacoma TRD Pro 2016-2021 Toyota Tacoma TRD Sport 2005-2013 Toyota Tacoma X-Runner

WeatherTech® Side Window Deflectors offer you fresh air enjoyment with an original equipment look. They are crafted in Germany from the finest 3mm lightly-tinted acrylic material available. Installation is quick and easy, with no exterior tape needed. WeatherTech® Side Window Deflectors are precision-machined to perfectly fit your vehicle. These low profile window deflectors help to reduce wind noise and allow interior heat to escape. Also available in dark tint for most vehicles. 3 year warranty.Installation InstructionsThis Part Fits: Year Make Model Submodel 1995-2004 Toyota Tacoma Base 1998 Toyota Tacoma DLX 1998-2000 Toyota Tacoma Limited 1998-2004 Toyota Tacoma Pre Runner 2001-2004 Toyota Tacoma S-Runner 1995-2000 Toyota Tacoma SR5

Tonno Pro's TonnoFold soft tri-folding truck bed cover is one of the easiest to use tonneau covers with exceptional durability and great looks. Its tear-resistant, double-sided vinyl top is long lasting and can handle heavy winds, light rain and snow. Under the notably strong vinyl is a powder-coated aluminum frame for an added level of protection from everyday wear and tear. This tri-folding cover keeps a tight fit to the truck bed, does not sag and has limited flutter when vehicle hits high speed. TonnoFold is delivered completely assembled making install a breeze Â-- no drilling necessary. Simply square up the cover to your truck bed and use its easy-to-use clamping system to lock it securely in place. Hauling large cargo? Completely remove the cover in minutes to meet your unique carrying needs.WarrantyInstallation InstructionsThis Part Fits: Year Make Model Submodel 2005-2015 Toyota Tacoma Base 2005-2015 Toyota Tacoma Pre Runner 2015 Toyota Tacoma TRD Pro 2005-2013 Toyota Tacoma X-Runner

The BedRug Impact Mat is designed specifically for trucks that have an existing spray-in liner or no bed liner. The all new design has an integrated tailgate gap guard hinge that connects the bed piece to the tailgate piece. The TPO composite top layer construction offers a flat work surface, that is slip and skid resistant. The " padded under layer provide dent and impact resistance while offering cushion for your knees while crawling around in your truck bed. The Impact Mat installs in minutes using hook and loop fasteners to install without the need to prep, sand or drill holes into your truck bed.Installation InstructionsThis Part Fits: Year Make Model Submodel 2005-2015 Toyota Tacoma Base 2016-2023 Toyota Tacoma Limited 2005-2015 Toyota Tacoma Pre Runner 2016-2023 Toyota Tacoma SR 2016-2023 Toyota Tacoma SR5 2021 Toyota Tacoma Trail 2016-2023 Toyota Tacoma TRD Off-Road 2015,2017-2023 Toyota Tacoma TRD Pro 2016-2023 Toyota Tacoma TRD Sport

SwingCase by UnderCover is the most innovative and versatile truck storage box ever made. Built to last from lightweight, high-impact ABS plastic; the tough, weatherproof, SwingCase is custom fitted for your truck. The SwingCase is affordable, too. In fact, you can purchase two SwingCases for less than the price of an old-fashioned truck bed box... and save a lot of space, too. Best of all, the SwingCase provides storage that is always within reach without sacrificing the use of your truck bed. Just simply pull the release lever and your gear swings out to you, no more reaching over or climbing into your truck bed. For work or play, go with SwingCase today.WarrantyInstallation InstructionsWarrantyThis Part Fits: Year Make Model Submodel 2005-2015 Toyota Tacoma Base 2016-2023 Toyota Tacoma Limited 2005-2015 Toyota Tacoma Pre Runner 2016-2023 Toyota Tacoma SR 2016-2023 Toyota Tacoma SR5 2021 Toyota Tacoma Trail 2023 Toyota Tacoma Trail Special Edition 2016-2023 Toyota Tacoma TRD Off-Road 2015,2017-2023 Toyota Tacoma TRD Pro 2016-2023 Toyota Tacoma TRD Sport 2005-2013 Toyota Tacoma X-Runner

Superguard Dark Smoke Hood Guards feature EGR's no drill, durable, high impact resistant automotive grade material for extra strength. The Dark Smoke finish provides a stealth appearance that compliments the front end of the vehicle. Mounts away from the hood for easy cleaning and maintenance. Lifetime warrantyInstallation InstructionsInstallation InstructionsThis Part Fits: Year Make Model Submodel 2005-2015 Toyota Tacoma Base 2005-2015 Toyota Tacoma Pre Runner 2015 Toyota Tacoma TRD Pro 2005-2013 Toyota Tacoma X-Runner

Experience a sleek and long-lasting solution designed for your Toyota Tacoma’s 5 ft bed. The BAK Revolver X4TS Toyota Tacoma cover delivers advanced cargo management and exceptional protection, constructed from premium marine-grade vinyl paired with heavy-duty, cut-resistant aluminum. Its eye-catching full matte-black finish and innovative one-handed roll-forward mechanism make it an indispensable upgrade for any Tacoma owner.Key Features• Material Excellence: Built with marine-grade vinyl and reinforced with cut-resistant aluminum slats for enduring durability.• Sleek Design: Features a full matte-black finish along with a patented rotational locking system for effortless one-handed operation.• Versatile Setup: Integrated T-slot channels allow for easy attachment of additional over-the-bed racks and cargo accessories, maximizing your truck’s functionality.• Weatherproof Performance: Includes full-perimeter seals—comprising a robust bulkhead, side seals, and redesigned rear corner caps—to keep your gear dry in all weather conditions.Compatibility & FitmentSpecifically designed for the Toyota Tacoma 5 ft bed, this cover fits models from 2005 to 2015, including the Base, Pre Runner, and the 2015 TRD Pro variants. Its precise fit ensures a seamless integration with your vehicle’s design, delivering both style and functionality.InstallationEnjoy a straightforward setup with our detailed installation guide. For step-by-step instructions, please refer to our Installation Instructions.Explore more innovative solutions in our BAK collection and enhance your vehicle’s performance and appearance today.

Rust Buster 1995-2004 Toyota Tacoma Mid Rear Over-Axle Frame Repair Kit - Right

WeatherTech Side Window Deflectors offer you fresh air enjoyment with an original equipment look. They are crafted in Germany from the finest 3mm lightly-tinted acrylic material available. Installation is quick and easy, with no exterior tape needed. WeatherTech Side Window Deflectors are precision-machined to perfectly fit your vehicle. These low profile window deflectors help to reduce wind noise and allow interior heat to escape. Also available in dark tint for most vehicles.This Part Fits: Year Make Model Submodel 2005-2015 Toyota Tacoma Base 2005-2015 Toyota Tacoma Pre Runner 2015 Toyota Tacoma TRD Pro 2005-2013 Toyota Tacoma X-Runner

THE BEST BANG FOR YOUR BUCK - ARMOR LITE Series exhaust systems are a value option with the same fitment, performance and sound as the premium products from MBRP.Heavy-gauge Aluminized Steel tubing helps to resist dings and dents caused by debris under your vehicle. This material can be a great choice for you if you live in a dry climate that doesn’t see much precipitation, or if you’re looking for great sound on a budget. All of the tubing is mandrel bent for maximum exhaust flow. Mandrel bending ensures no rippling in the bends. The end result is that it gives you more fresh air inside your engine’s cylinders, allowing it to produce more power and improve vehicle performance and longevity. MBRP, Stand out from the crowd with a performance exhaust system that sounds great.This Part Fits: Year Make Model Submodel 2005-2015 Toyota Tacoma Base 2005-2015 Toyota Tacoma Pre Runner 2015 Toyota Tacoma TRD Pro 2005-2013 Toyota Tacoma X-Runner

RELIABILITY BACKED FOR A LIFETIME - ARMOR PLUS Series exhaust systems are crafted from corrosion-resistant T409 Stainless Steel - a value-oriented material designed to protect from penetrating rust and will stand up to almost anything you can throw at it.T409 Stainless Steel tubing is easy to clean. If you’re looking for a performance exhaust system with a Lifetime Warranty, this is probably the one for you. If you don’t find yourself faced with lots of precipitation and salt, this is all you’re ever going to need. All of the tubing is mandrel bent for maximum exhaust flow. Mandrel bending ensures no rippling in the bends. The end result is that it gives you more fresh air inside your engine’s cylinders, allowing it to produce more power and improve vehicle performance and longevity. It's important to note that T409 Stainless Steel is resistant to penetrating rust but winter conditions, heavy salt air, and road treatments might accelerate the corrosion process, these conditions are not covered by MBRP's manufacturer warranty unless the part or system fails completely. When it comes to a performance exhaust system, choose the MBRP ARMOR PLUS Series for a reliable option backed for a lifetime. MBRP, Stand out from the crowd with a performance exhaust system that sounds great.This Part Fits: Year Make Model Submodel 2005-2015 Toyota Tacoma Base 2005-2015 Toyota Tacoma Pre Runner 2015 Toyota Tacoma TRD Pro 2005-2013 Toyota Tacoma X-Runner

Baja Designs 05-22 Toyota Tacoma - OnX6+ Arc Series 50in Wide Driving Pattern LED Light Bar Roof Kit

Enhance your 2005-2011 Toyota Tacoma’s protection with the Westin Wade Platinum Bug Shield – Smoke. Engineered to defend against road debris, rock chips, and nicks, this high-impact shield delivers flawless one-piece construction that contours perfectly to your truck’s body. Enjoy exceptional durability and a sleek smoke finish that boosts your vehicle’s appearance while minimizing the chance of costly repairs.This bug shield is perfect for truck enthusiasts in search of reliable, precision-engineered accessories and simple installation. Purchase the Westin 2005-2011 Toyota Tacoma bug shield with confidence, knowing it’s built to resist vibration, flex, and flutter—even on the toughest journeys.Key Features One-piece, integrated design for seamless protection High-impact molded plastic designed to resist flex and vibration Sleek smoke finish that enhances your truck’s exterior Precision fit for 2005-2011 Toyota Tacoma models Fast and easy installation process Strong defense against road debris and damaging elements Installation & WarrantyInstallation is straightforward—just follow our Installation Instructions for a step-by-step guide. Our product is supported by manufacturer quality assurance and outstanding 24/7 support to ensure you drive with confidence every mile.Vehicle Fitment Year Make Model Submodel 2005-2011 Toyota Tacoma Base 2005-2011 Toyota Tacoma Pre Runner 2005-2011 Toyota Tacoma X-Runner Explore our Toyota Tacoma 2005-2015 Parts collection for additional exterior accessories and upgrades.

MagnaFlow California Grade CARB Compliant Direct-Fit Catalytic Converter 441770 helps keep the check engine light off. DIY installation is easy with the proper tools (no cutting or welding required). With features including mandrel-bent tubing to eliminate flow restrictions and stainless steel construction to resist corrosion, you can have confidence in the quality of this catalytic converter. Using state-of-the-art 3D scanning systems in the design process, the MagnaFlow metrology department ensures this new part to fit and function like the original equipment. This direct-fit catalytic converter is designed specifically for the 2002-2004 Toyota Tacoma and interchanges with OE parts 17403-07041 and 17403-07040. Avoid potential exhaust leaks by using the included gaskets to get a proper seal. This replacement part is designed to meet or exceed California Air Resource Board requirements, and has undergone additional testing to comply with CARB guidelines to allow for legal use in California and CARB restricted states, for the listed vehicles.This Part Fits: Year Make Model Submodel 2002-2004 Toyota Tacoma Base 2002-2004 Toyota Tacoma Pre Runner 2002-2004 Toyota Tacoma S-Runner

Keep the check engine light off with MagnaFlow HM Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 93661. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow's state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This direct-fit catalytic converter is designed specifically for the 2005-2015 Toyota Tacoma and interchanges with OE part 17410-0P020. Avoid potential exhaust leaks by using the included gaskets to get a proper seal. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with Federal/EPA Emission systems.This Part Fits: Year Make Model Submodel 2005-2015 Toyota Tacoma Base 2005-2015 Toyota Tacoma Pre Runner 2015 Toyota Tacoma TRD Pro 2005-2013 Toyota Tacoma X-Runner

This Rebel Series cat-back is designed with dual polished exhaust tips that exit in front of the rear passenger tire for a unique, aggressive look. The tips come with unique laser-etched aFe Power logos on the side and are constructed from stainless steel for durability. The exhaust system is constructed from 3" dual MIG-welded, mandrel bent stainless steel tubing for maximum flow, increased horsepower and torque. In testing, the cat-back exhaust system resulted in gains up to + 9 horsepower and + 16 lbs. x ft. of torque, as measured on our in-house dyno Finishing off this exhaust is a 3-1/2" diameter polished tip. The tip comes with a laser-cut aFe Power badge riveted on for an aggressive style. The performance cat-back exhaust system includes necessary hardware and clamps for a hassle-free install, with no cutting required making it a true bolt on system. 3-1/2" Dia. Polished Middle-Side Exit Tips: Finishing off the exhaust are dual 3-1/2" diameter polished 304 stainless steel clamp-on tips with a laser-etched aFe power logo on the side for an aggressive style. The tips are designed to exit from in front of the rear passenger side tire for a unique custom look. Installation Is A Snap: This Rebel Series exhaust system uses factory mounting locations providing stability and hassle-free installation. Leak-Free Seal: High quality band clamps are used for a complete 360-degree sealing surface eliminating leak paths. Aggressive Sound: A free-flowing stainless steel muffler is used to absorb high pitch tones producing a powerful sound and unleashing all available horsepower and torque. Perfect Fit: OE-style bayonet hangers are used to maintain a stable pipe location during high vibration and high heat conditions. Th e bayonet tip holds the hanger bushing in place for an OE-style fit that does not change with time. This makes for an easy installation with no cutting required.This Part Fits: Year Make Model Submodel 2005-2015 Toyota Tacoma Base 2005-2015 Toyota Tacoma Pre Runner 2015 Toyota Tacoma TRD Pro 2005-2013 Toyota Tacoma X-Runner

Keep the check engine light off with MagnaFlow California Grade CARB Compliant Direct-Fit Catalytic Converter 5491661. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow's state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This direct-fit catalytic converter is designed specifically for the 2005-2011 Toyota Tacoma and interchanges with OE part 17410-0P020. Avoid potential exhaust leaks by using the included gaskets to get a proper seal. This replacement part is designed to meet or exceed California Air Resource Board requirements, and has undergone additional testing to comply with CARB guidelines to allow for legal use in California and CARB restricted states, for the listed vehicles.This Part Fits: Year Make Model Submodel 2005-2011 Toyota Tacoma Base 2005-2011 Toyota Tacoma Pre Runner 2005-2011 Toyota Tacoma X-Runner

Keep the check engine light off with MagnaFlow California Grade CARB Compliant Direct-Fit Catalytic Converter 5411028. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow's state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This direct-fit catalytic converter is designed specifically for the 2005-2012 Toyota Tacoma and interchanges with OE parts 17410-0C100 and 17410-0C090. The included gaskets & hardware reduce the possibility of a leaking seal while avoiding the need to reuse corroded factory parts for installation. This replacement part is designed to meet or exceed California Air Resource Board requirements, and has undergone additional testing to comply with CARB guidelines to allow for legal use in California and CARB restricted states, for the listed vehicles.This Part Fits: Year Make Model Submodel 2005-2012 Toyota Tacoma Base 2005-2012 Toyota Tacoma Pre Runner

MagnaFlow HM Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 23758 helps keep the check engine light off. DIY installation is easy with the proper tools (no cutting or welding required). With features including mandrel-bent tubing to eliminate flow restrictions and stainless steel construction to resist corrosion, you can have confidence in the quality of this catalytic converter. Using state-of-the-art 3D scanning systems in the design process, the MagnaFlow metrology department ensures this new part to fit and function like the original equipment. This direct-fit catalytic converter is designed specifically for the 1999-2004 Toyota Tacoma and interchanges with OE parts 17410-0C030 and 17410-0C031. The included gaskets & hardware reduce the possibility of a leaking seal while avoiding the need to reuse corroded factory parts for installation. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with Federal/EPA Emission systems.This Part Fits: Year Make Model Submodel 1999-2004 Toyota Tacoma Base 2000 Toyota Tacoma Limited 1999-2003 Toyota Tacoma Pre Runner 1998-2000 Toyota Tacoma SR5

The MagnaFlow 2005-2012 Toyota Tacoma Street Series Cat-Back Performance Exhaust System 16625 brings out the personality of your 4.0L 2005-2012 Toyota Tacoma with our signature resonant, powerful engine tone and dyno-proven performance. Thanks to its fast-flowing, mandrel bent 3in. main piping and 1 Straight-Through mufflers ending in a Single Passenger Side Rear exit with 3.5in. Polished Welded-On Single Wall Angle Cut Rolled Edge tips, this Toyota Tacoma exhaust kit has the performance chops to match its sporty sound and appearance. Upgrade your ride to the next level with an exhaust that has the pipes to put other Toyota Tacoma's to shame. With this system your vehicle will be producing Moderate exterior and Mild interior sound levels while leaving other cars and trucks feeling envious at every stoplight. Exhaust kit 16625 features a cat-back layout that replaces your ride's stock exhaust components from near the catalytic converter on back. Extensive 3D scanning during development has resulted in a direct-fit design that you can easily install yourself. 16625 is produced using CNC precision robotic manufacturing techniques and is backed by MagnaFlow's 1-year limited finish warranty and limited lifetime construction warranty.This Part Fits: Year Make Model Submodel 2005-2013 Toyota Tacoma Base 2005-2012 Toyota Tacoma Pre Runner

Experience the next level in truck protection with the Toyota Tacoma BAKFlip MX4 Cover. This premium truck bed cover is built to deliver heavy-duty durability and year‑round performance. Designed as an upgrade from the G2 series, the MX4 combines a sleek, low-profile look with engineered strength for everyday use even in the most extreme conditions.Key Benefits• Upgraded heavy‑duty aluminum panels with a matte finish provide superior UV and scratch resistance.• Premium density foam core ensures enhanced durability and insulation.• Integrated tailgate seal offers seamless operation with your tailgate open or closed.• Enhanced latch housing components deliver a secure, flush-mounted design.Engineered for robust performance, the MX4 cover is BUILT to withstand harsh weather while preserving the aesthetic appeal of your Toyota Tacoma. Enjoy effortless operation and quick removal when needed, keeping your truck both stylish and highly functional.Performance & InstallationInstallation is straightforward—simply follow the provided step‑by‑step guide available in the Installation Instructions. The cover is designed to complement a range of Toyota Tacoma models from 2005 to 2015, including Base, Pre Runner, and TRD Pro editions, and comes with an extended 5‑year warranty for lasting peace of mind.Discover more options in our Toyota Tacoma 2005‑2015 Exterior Accessories And Tonneau Covers collection or explore our complete Bakflip MX4 Collection for additional high‑performance upgrades.

Looking for a way to keep your Tacoma transmission running at its best? Look no further than the Mishimoto 2005-2011 Toyota Tacoma Transmission Cooler. This cutting-edge transmission oil cooler offers a dependable solution to maintain performance and instill confidence. Whether you're using your vehicle for off-roading or cruising on the highways, your transmission needs to handle incredibly demanding tasks.----This transmission cooler is built to prevent extreme fluid temperatures, which can quickly lead transmission fluid to breakdown, causing a lack of lubrication, and eventual failure. Our cooler features a tube-and-fin construction with densely-packed internal fins to effectively draw heat out of the transmission fluid and external fins to transfer that heat to the ambient air. With a 91-percent increase in core volume and a 225-percent increase in external fin area over the stock cooler, our transmission cooler is highly effective at keeping your Tacoma's transmission fluid cool and is the perfect upgrade for drivers who demand the best from their vehicle.----The Mishimoto 2005-2011 Toyota Tacoma Transmission Cooler is designed with ease of installation in mind. This kit includes everything needed to make installation easy, and with the Mishimoto Lifetime Warranty, you can drive with confidence knowing that Mishimoto has your back.Installation InstructionsThis Part Fits: Year Make Model Submodel 2005-2011 Toyota Tacoma Base 2005-2011 Toyota Tacoma Pre Runner 2005-2011 Toyota Tacoma X-Runner

The XR Series combines the ONE MX with the integrated Trax Rail System that allows for unique and personal customization above your truck bed cover. The RetraxONE XR combines strong, durable polycarbonate with a powerful and incredible scratch resistant matte finish paired with a low-profile patented design that streamlines the overall appearance and provides a firm seal. The XR Series optimizes cargo capacity with the cover open or closed, providing the ultimate versatility in cargo management. The Trax Rail System will work with most T-slot accessories from Yakima, Thule, Rhino Rack, and many more offering endless possibilities. Pairing the Trax Rail System with accessories offers double the cargo capacity. This unique technology frees up the hitch with the ability to mount bikes, coolers, outdoor gear and more on top of the bed cover by combining the Trax Rail system with the t-slot accessories.Installation InstructionsInstallation InstructionsThis Part Fits: Year Make Model Submodel 2005-2015 Toyota Tacoma Base 2005-2015 Toyota Tacoma Pre Runner 2015 Toyota Tacoma TRD Pro

Yukon Gear and Axle manufactures a complete line of general replacement and performance series of pinion yokes for many street, racing, and heavy-duty off-road applications.Installation InstructionsInstallation InstructionsThis Part Fits: Year Make Model Submodel 2001-2007 Toyota Sequoia Limited 2001-2007 Toyota Sequoia SR5 1993-1998 Toyota T100 Base 1996-1997 Toyota T100 DLX 1994-1995 Toyota T100 DX 1993 Toyota T100 One-Ton 1995 Toyota T100 One-Ton DLX 1993-1998 Toyota T100 SR5 1995-2015 Toyota Tacoma Base 1998 Toyota Tacoma DLX 1998-2000 Toyota Tacoma Limited 1998-2015 Toyota Tacoma Pre Runner 2001-2004 Toyota Tacoma S-Runner 1995-2000 Toyota Tacoma SR5 2015 Toyota Tacoma TRD Pro 2005-2013 Toyota Tacoma X-Runner 2000-2006 Toyota Tundra Base 2000-2006 Toyota Tundra Limited 2000-2006 Toyota Tundra SR5

aFe POWER's Twisted Steel Headers are constructed of 1-5/8" 16-gauge 409 stainless steel tubing with 3/8" thick CNC Laser cut flanges to ensure a leak-free seal. To eliminate dead space that can cause turbulence and hinder flow that formed s are prone to produce, a mitered merge and optimized tube lengths are used for true pulse control technology improving flow and performance. The smooth curves and increased diameter of this header helps remove restriction and keeps exhaust gas flowing smoothly for improved performance and durability. All components are supplied for a hassle-free bolt-on and go installation with no modifications necessary. 3-to-1 mitered merge decrease turbulence and increases exhaust velocity. The result is increased horsepower, torque and improved throttle response. Tube lengths are optimized for true pulse control technology which improves flow and performance. Flanges are CNC laser cut not only to be visually appealing but for a durable, precise fit and leak-free seal. These headers are constructed of durable CNC mandrel bent, stainless steel tubing for maximum performance, corrosion resistance and strength eliminating cracking. Each header comes with 300 CPSI (cell per square inch) metallic high-flow catalytic converters for maximum flow. This performance header is designed to fit in the stock location no cutting or drilling required making it a true bolt-on and go solution. This kit also includes a gasket set and all necessary mounting hardware for a hassle-free installation.This Part Fits: Year Make Model Submodel 2003-2009 Toyota 4Runner Limited 2003-2009 Toyota 4Runner Sport 2003-2009 Toyota 4Runner SR5 2007-2009 Toyota FJ Cruiser Base 2008 Toyota FJ Cruiser Trail Teams Special Edition 2007 Toyota FJ Cruiser TRD Special Edition 2005-2011 Toyota Tacoma Base 2005-2011 Toyota Tacoma Pre Runner 2005-2011 Toyota Tacoma X-Runner 2005-2006 Toyota Tundra Base 2005-2006 Toyota Tundra SR5

Built from aircraft grade aluminum for superior strength, this Street Series' larger tube and fin core maintains cooler temperatures over a longer range of time.Installation InstructionsThis Part Fits: Year Make Model Submodel 2005-2015 Toyota Tacoma Base 2005-2015 Toyota Tacoma Pre Runner 2015 Toyota Tacoma TRD Pro 2005-2013 Toyota Tacoma X-Runner

Keep your Hi-Lift jack secure and free up valuable cab space with this innovative mounting solution. Designed with off-road enthusiasts in mind, the Fishbone Offroad Tacoma In-Bed Hi-Lift Mount is engineered for 2005+ Toyota Tacoma models, offering a smart way to transfer your Hi-Lift jack from the cab to the bed. This Tacoma Hi-Lift Mount not only maximizes storage and organization but also assures quick access during your off-road adventures—truly a game changer for on-trail efficiency.Key Features• Compatibility: Fits 2005+ Toyota Tacoma• Finish: Durable black powder coat for a sleek, long-lasting look• Hardware: All installation components included for a hassle-free setup• Installation: Simple and secure placement that supports most Hi-Lift jacks (jack sold separately)• Organization: Relocates your jack to free up interior space, enhancing both vehicle utility and convenienceUpgrade your ride with the quality and innovation of the Fishbone Tacoma Mount, designed for durability and functionality. Whether you’re a seasoned pro or new to off-road adventures, this mounting system is your key to a more organized and accessible vehicle setup. For more top-tier mounting solutions, explore our Jacks collection or browse the full range of Toyota Tacoma parts in our Toyota Tacoma 2005-2015 Parts collection.

Fits 2005 to Current Toyota Tacoma Complete Chase Rack with Window Panel. Made from 1/8in. Black Powder Coated Steel. Stainless Steel hardware. Can bolt into existing factory trail rail OR clamp onto bed side. Easy installation for one or two persons. Versatile mounting capabilities.This Part Fits: Year Make Model Submodel 2005-2015 Toyota Tacoma Base 2016-2024 Toyota Tacoma Limited 2005-2015 Toyota Tacoma Pre Runner 2016-2024 Toyota Tacoma SR 2016-2024 Toyota Tacoma SR5 2021 Toyota Tacoma Trail 2023 Toyota Tacoma Trail Special Edition 2024 Toyota Tacoma Trailhunter 2016-2024 Toyota Tacoma TRD Off-Road 2024 Toyota Tacoma TRD PreRunner 2015,2017-2024 Toyota Tacoma TRD Pro 2016-2024 Toyota Tacoma TRD Sport 2005-2013 Toyota Tacoma X-Runner

A sleek, low-profile design is the signature of the Lo Pro. Heavy-duty construction and the patented automatic tension control keep the cover looking great in any weather condition. The Lo Pro mounts inside the rails of the truck bed, providing full access to stake pocket holes for use with additional accessories. Stylish design, simple functionality and durable bed protection are what make the Lo Pro North America's #1 selling roll-up truck bed cover.Installation InstructionsThis Part Fits: Year Make Model Submodel 2005-2015 Toyota Tacoma Base 2005-2015 Toyota Tacoma Pre Runner 2015 Toyota Tacoma TRD Pro

Enhance your Toyota Tacoma’s aesthetics and performance with the innovative TruXport roll-up truck bed cover. Designed as a premium Truxedo Toyota Tacoma bed cover and an ideal Truxport solution for Tacoma models, its sleek design and durable construction elevate both style and functionality. This cover, perfectly suited for a Toyota Tacoma 6ft bed configuration, mounts securely on truck bed rails while allowing effortless roll-up operation for complete bed access.Key Benefits Durable Construction: Built with high-quality vinyl and robust reinforcements for enduring performance. Preset Tension Control: Ensures a smooth, secure fit all year round. Quick & Simple Installation: Easily attaches to existing truck bed rails using minimal tools. Weather Protection: Safeguards your cargo from the elements while enhancing your truck’s appearance. Compatible Models 2005-2015 Toyota Tacoma Base 2005-2015 Toyota Tacoma Pre Runner 2015 Toyota Tacoma TRD Pro 2005-2013 Toyota Tacoma X-Runner For additional options, visit our Tacoma Bed Cover collection.Additional ResourcesFor detailed guidance, please refer to the Owner’s Manual and Installation Instructions.

Tonno Pro's TonnoFold soft tri-folding truck bed cover is one of the easiest to use tonneau covers with exceptional durability and great looks. Its tear-resistant, double-sided vinyl top is long lasting and can handle heavy winds, light rain and snow. Under the notably strong vinyl is a powder-coated aluminum frame for an added level of protection from everyday wear and tear. This tri-folding cover keeps a tight fit to the truck bed, does not sag and has limited flutter when vehicle hits high speed. TonnoFold is delivered completely assembled making install a breeze Â-- no drilling necessary. Simply square up the cover to your truck bed and use its easy-to-use clamping system to lock it securely in place. Hauling large cargo? Completely remove the cover in minutes to meet your unique carrying needs.WarrantyInstallation InstructionsThis Part Fits: Year Make Model Submodel 2005-2015 Toyota Tacoma Base 2005-2015 Toyota Tacoma Pre Runner 2015 Toyota Tacoma TRD Pro

Discover the ultimate storage solution with the Westin 05-21 Tacoma cargo rack – a rugged, high-performance choice for any Toyota Tacoma enthusiast. This Toyota Tacoma overland rack is engineered with high-strength materials and a stylish textured black finish to deliver exceptional durability, whether you’re off-road or on the job.Key Features• Modular design for seamless customization with cargo baskets, bike racks, and more• High-strength construction ensures stability and longevity• Sleek, low-profile design that enhances your truck’s appearance• Easy installation paired with secure mounting optionsTechnical Specs & Compatibility• Designed for 2005-2024 Toyota Tacoma trims: Base, Limited, Pre Runner, SR, SR5, Trail, Trail Special Edition, Trailhunter, TRD Off-Road, TRD PreRunner, TRD Pro, TRD Sport, and X-Runner• Precision engineering for a perfect fit on overland setupsInstallation & WarrantyInstallation is straightforward and user-friendly. Please review the Installation Instructions for detailed guidance. This cargo rack base is built to last and backed by Westin’s commitment to quality and reliability. Note that additional OEM bed rail kits may be required for specific accessory setups.For more premium parts and accessories, visit the Westin collection.