Suspension Multi-Purpose Bump Stops

This hydraulic bump stop system was developed as an OEM replacement, making installation a simple and straightforward bolt-on affair. With no major cutting, welding, or fabrication required you have the option to return the vehicle back to its stock form. The factory rubber bump stops have a limited energy absorption capacity and a rapid release of this energy upon rebound – This translates into a harsh ride and poor handling in rough terrain. ICON hydraulic bump stops absorb and release this energy in a much more controlled manner due to the digressive rebound piston valving, resulting in predictable handling and vehicle dynamics. Operating range of 50 – 250 PSI 2.5” travel bump stop reduces rear end ‘kick’ and improves overall performance Replaceable noise reducing striker pad Fully serviceable “ICON 1K” tested under rigorous off-road conditions to validate tune, performance, strength, and durability Position sensitive technology exponentially increases bottom-out resistance Vehicle specific bump stop tune to provide smooth engagement and best ride quality Direct bolt-in to OEM bump stop location makes for an easy and straightforward install Fully reversible to factory configuration with no bed cutting required Heavy duty 1 ¼” CNC machined nitro steel shaft Multi stage CAD plated body for maximum corrosion resistance Double sealed high pressure Schrader valve Additional Attributes: GTIN: 00840103403007 Attachment Type: Bolt On Bumper Material: Hydraulic 17: Black 3390: Performance Length: 2,5 Service Parts: 202004 - 2.0 AIR BUMP REBUILD KIT Extened Information: Emissions : Emission verification to be determined in ACES, vehicle application data. Life Cycle Status: Available To Order Packaging: Quantity of Each: 1.0 Package UOM: EA Dimension: x x inches PDF: I56108_REVA

The ICON Raptor Bump Stop System includes heavy duty steel clamshell brackets, a billet aluminum frame crossmember, adjustable tension rods, hydraulic bump stops, and all of the necessary hardware required to complete the installation. The clamshell brackets, crossmember, and tension rods add strength to the frame to prevent damage during extreme off-road use while increasing chassis rigidity for predictable handling and improved vehicle dynamics. The 2.5” travel hydraulic bump stops feature velocity sensitive technology which means that as the shaft speed increases the damping ability ramps up, resulting in exponential bottoming resistance that won’t negatively affect articulation. Combining all of these components into an easy to install, bolt-on package, ICON has developed the most comprehensive rear bump stop solution on the market for Raptor owners seeking the next level of strength and performance. Bolt-on installation does not require any fabrication or removal of the bed Replaceable noise-reducing striker pad Fully serviceable “ICON 1K” tested under rigorous off-road conditions to validate tune, performance, strength, and durability 2.5” travel hydraulic bump stop reduces rear end ‘kick’ and improves overall vehicle performance Velocity sensitive technology exponentially increases bottom-out resistance Vehicle specific bump stop tune provides smooth engagement and excellent ride quality 6061 billet aluminum crossmember increases chassis rigidity to improve overall vehicle dynamics Steel clamshell brackets strengthen the frame in critical areas to prevent damage from extreme off-road use Adjustable tension rods allow the frame to be preloaded to withstand torsional force during hard impacts Heavy duty 1.25” CNC machined nitro steel shafts Multi-stage CAD plated body for maximum corrosion resistance Additional Attributes: GTIN: 00840103407166 Attachment Type: Bolt On Bumper Material: Hydraulic 17: Black Diameter: 2 3390: Performance Length: 2.5 Service Parts: 202004 - 2.0 AIR BUMP REBUILD KIT Extened Information: Emissions : Emission verification to be determined in ACES, vehicle application data. Life Cycle Status: Available To Order Packaging: Quantity of Each: 1.0 Package UOM: EA Dimension: x x inches PDF: I95121_REVB

ICON Vehicle Dynamics now offers a bolt-in hydraulic bumpstop Kit for the 2007-2014 Toyota FJ Cruiser AND 2003-UP 4Runner. This kit reduces rear-end “kick” and helps to improve the overall off-road performance of the vehicle. The OEM rubber bumpstops have a limited energy absorption capacity that is released rather uncontrollably upon rebound, resulting in a harsh ride and ill-handling vehicle in rough terrain. The ICON hydraulic bumpstops are velocity sensitive which means that the amount of energy absorbed increases the faster they are engaged, so those harsh g-outs and square edges are less likely to interrupt your off-road adventures. Vehicles equipped with the ICON hydraulic bumpstop kit will have an increased bottom-out resistance over stock, as well as an improved drivability off-road. This kit installs easily inside the coil, and the bumpstops are fully rebuildable with the ability to be tuned for a custom ride. With a simple installation, proven effectiveness, and no loss in travel there is no reason not to bolt up the ICON Vehicle Dynamics hydraulic bumpstop kit to your ride and experience the difference. Hydraulic / pneumatic bumpstop increases bump energy capacity Urethane rod seal and wiper for long service life User serviceable Velocity sensitive bumpstop increases the amount of energy absorbed the faster it is hit Reduces rear end kick and improves overall performance Increased bottom resistance over stock No loss in travel Easy installation inside coil Pre-tuned for most users Linear-digressive piston which compliment a bumpstop over the industry standard linear-linear piston. Infinite tuning options with valve stack, oil volume, and nitrogen pressure adjustments CAD Plated body for corrosion free service Additional Attributes: GTIN: 00840103402963 Length: 1.75 Attachment Type: Bolt On Bumper Material: Hydraulic Bumper Type: Hydraulic 17: Black Diameter: 2 3390: Performance 30: yes Service Parts: 202004 - 2.0 AIR BUMP REBUILD KIT Extened Information: Emissions : Emission verification to be determined in ACES, vehicle application data. Life Cycle Status: Available To Order Packaging: Quantity of Each: 1.0 Package UOM: EA Dimension: x x inches PDF: I56104_REVB

What does the bumpstop do? In short, a bumpstop's job is to control the final up travel of the suspension. Many Raptor owners are using their vehicles beyond their intended design and are often loaded with additional weight, which when combined results in VERY high suspension impact speeds. The factory rear bumpstop is made of foam rubber and is limited on how much energy it can absorb.  Ford Raptors have a couple of unique issues that are problematic for proper control of bumpstop forces.  The factory rear bumpstops are mounted in a manner that allows for the rubber to squish out to the side of its mount, allowing metal to metal contact.  The frame surrounding the OEM bumpstop mount is not capable of these kinds of forces and with repeated abuse can lead to frame damage not covered by warranty. Designed for increased leaf spring clearance so there is no loss in up travel with stock or aftermarket springs Cross member and tension rods stabilize frame rails and prevent twisting under hard impacts Increases frame rigidity and improves overall vehicle dynamics Industry first billet cross beam Pre-tuned and Nitrogen charged for most Ford Raptors Integrated adjustability for future ICON Raptor specific products Linear-digressive piston which compliments a bumpstop over the industry standard linear-linear piston. Infinite tuning options with valve stack, oil volume, and nitrogen pressure adjustments CAD Plated body for corrosion free service Urethane rod seal and wiper for long service life User serviceable and tunable Easy bolt on installation without having to remove the truck bed 6061 Solid billet cross bar that is polished & anodized Bumpstop striker pad does not require leaf spring disassembly Comfortable on road manners with sufficient damping capability under extreme load Hydro-pneumatic bumpstop increases bump energy capacity Velocity sensitive hydraulic bumpstop increases the amount of energy absorbed the faster it is hit Reduces rear end kick and improves overall performance Clamshell brackets strengthen frame in critical areas preventing frame damage from extreme off road use Additional Attributes: GTIN: 00840103407159 Attachment Type: Bolt On Bumper Material: Hydraulic Bumper Type: Hydraulic 17: Black Diameter: 2 3390: Performance Length: 2.5 30: yes Service Parts: 202004 - 2.0 AIR BUMP REBUILD KIT Extened Information: Emissions : Emission verification to be determined in ACES, vehicle application data. Life Cycle Status: Available To Order Packaging: Quantity of Each: 1.0 Package UOM: EA Dimension: x x inches PDF: I95120_REVA

The ICON Vehicle Dynamics Front Hydraulic Bump Stop Kit for the 2007-2018 Jeep Wranger JK, 2018-UP Jeep Wrangler JL and 2020-Up Jeep Gladiator was deigned to provide unparalleled off-road performance at the limits of wheel travel by adding an extra layer of ICON damping ability to the front of your Jeep. The function of the bump stop is to control and limit the final position of the suspension during up-travel. The factory bump stops have a limited energy absorption capacity and an uncontrolled release of this energy upon rebound – translating into a harsh ride and poor handling during more aggressive driving in rough terrain. ICON’s Front Hydraulic Bump Stop Kit features velocity sensitive technology meaning that as the shaft speed increases the damping ramps up to provide excellent bottoming resistance that won’t negatively affect articulation. This energy is then released in a much more controlled manner allowing drivers to focus on the obstacles in front of them rather than being bounced around the cab. 2.5” travel hydraulic bump stop reduces front end bottom-out and improves overall vehicle performance Steel bump stop brackets guaranteed for life against breakage or manufacturer defect Velocity sensitive technology exponentially increases bottom-out resistance Vehicle specific bump stop tune provides smooth engagement and excellent ride quality Heavy duty 1.25” CNC machined nitro steel shafts Multi-stage CAD plated body for maximum corrosion resistance Replaceable noise-reducing striker pad Fully serviceable Straightforward bolt-on installation “ICON 1K” tested under rigorous off-road conditions to validate tune, performance, strength, and durability Additional Attributes: GTIN: 00840103401447 Attachment Type: Bolt On Bumper Material: Hydraulic 17: Black Diameter: 2 3390: Performance Length: 2.5 30: yes Service Parts: 202004 - 2.0 AIR BUMP REBUILD KIT Extened Information: Emissions : Emission verification to be determined in ACES, vehicle application data. Life Cycle Status: Available To Order Packaging: Quantity of Each: 1.0 Package UOM: EA Dimension: x x inches PDF: I22042_REVB

As part of the kit, ICON includes an industry first selectable install height for the hydraulic air bumpstop so up travel is not limited with use of an aftermarket thicker leaf pack. This allows you to upgrade your leaf springs down the road, and retain maximum up travel without having to purchase a new bump stop bracket kit. Bolt-on design using existing holes in frame for clean install with no cutting or welding User serviceable Industry only Toyota Tacoma specific tune to maximize bottom out resistance while having smooth engagement as well as return Absorbs additional impact energy over the OEM rubber bumpstop and returns the axle in a more controlled manner Industry only kit allowing adjustment for leaf pack height changes so uptravel is not lost Can be returned to stock Linear-digressive piston which compliment a bumpstop over the industry standard linear-linear piston. Infinite tuning options with valve stack, oil volume, and nitrogen pressure adjustments Anodized billet top cap, o-ring sealed back up cap, seal head and striker CAD Plated body for corrosion free service Urethane rod seal and wiper for long service life Additional Attributes: GTIN: 00840103402956 Length: 2.5 Attachment Type: Bolt On Bumper Material: Hydraulic Bumper Type: Hydraulic 17: Black Diameter: 2 3390: Performance 30: yes Service Parts: 202004 - 2.0 AIR BUMP REBUILD KIT Extened Information: Emissions : Emission verification to be determined in ACES, vehicle application data. Life Cycle Status: Available To Order Packaging: Quantity of Each: 1.0 Package UOM: EA Dimension: x x inches PDF: I56103_REVE

This mirco cellular foam bumpstop kit offers a more compliant option than the OE rear bumpstops in an easy bolt-on option. The more compliant material will help soften bottom outs and the shorter overall height will cause the bump stop to engage later in the compression travel, furter improving suspension performance. Compliant yet durable micro cellular poly foam bump stop material Corrosion resistant anodized mounting plate Fits 2WD & 4WD applications Direct bolt-in design makes for a simple and straightforward installation Additional Attributes: GTIN: 00840103408491 Attachment Type: Bolt On Bumper Material: Foam Bumper Type: Foam Cell 17: Black 3390: Performance 30: yes Extened Information: Life Cycle Status: Available To Order Emissions : Emission verification to be determined in ACES, vehicle application data. Packaging: Quantity of Each: 1.0 Package UOM: EA Dimension: x x inches PDF: I191205_REVA

Additional Attributes: GTIN: 00674866004580 Extened Information: Life Cycle Status: Available To Order Packaging: Quantity of Each: 1 Package UOM: EA Dimension: 8 x 4 x 1 inches

2007-18 Jeep JK 4WD. Designed for the aggressive offroad driver. The bolt-on brackets and race proved hydraulic bump stops will cushion hard compression impacts to the front suspension. Additional Attributes: GTIN: 00674866102156 Extened Information: Life Cycle Status: Available To Order Packaging: Quantity of Each: 1 Package UOM: EA Dimension: 22.53 x 15.59 x 12 inches

Additional Attributes: GTIN: 00674866101623 Extened Information: Life Cycle Status: Available To Order Packaging: Quantity of Each: 1 Package UOM: EA Dimension: 13.3 x 21.5 x 5.4 inches

2007-18 Jeep JK 4WD. 2018-20 Jeep JL 4WD. Designed for the aggressive offroad driver. This Dirt Logic 2.25 hydraulic bump stop replaces the factory bump stop and will cushion hard compression impacts to the front suspension. Additional Attributes: GTIN: 00674866101692 Extened Information: Life Cycle Status: Available To Order Packaging: Quantity of Each: 1 Package UOM: EA Dimension: 7 x 15 x 6 inches

Additional Attributes: GTIN: 00674866095489 Extened Information: Life Cycle Status: Available To Order Packaging: Quantity of Each: 1 Package UOM: EA Dimension: 14.4 x 6.4 x 4.8 inches

2007-18 Jeep JK 4WD. Designed for the aggressive offroad driver. This Dirt Logic 2.25 hydraulic bump stop is designed for use with our weld on bump stop can. These rear Bump Stops are for custom fabrication and provide 4in of travel. Rear Dirt Logic 2.25 Bump Stop. Additional Attributes: GTIN: 00674866095472 Extened Information: Life Cycle Status: Available To Order Packaging: Quantity of Each: 1 Package UOM: EA Dimension: 14.4 x 6.4 x 4.8 inches

2007-18 Jeep JK 4WD. Designed for the aggressive offroad driver. This Bump Stop Can allows for the use of Dirt Logic 2.25 hydraulic bump stops on the rear of your JK. These rear Bump Stop Cans are for custom fabrication and require frame modification and welding. Rear Weld On Bump Stop Can. Additional Attributes: GTIN: 00674866019720 Extened Information: Life Cycle Status: Available To Order Packaging: Quantity of Each: 1 Package UOM: EA Dimension: 8.4 x 6.4 x 4.8 inches

Additional Attributes: GTIN: 00674866011182 Extened Information: Life Cycle Status: Available To Order Packaging: Quantity of Each: 1 Package UOM: EA Dimension: 9 x 5 x 5 inches

Additional Attributes: GTIN: 00674866011212 Extened Information: Life Cycle Status: Available To Order Packaging: Quantity of Each: 1 Package UOM: EA Dimension: 4.75 x 6.25 x 2.5 inches